InterPore2024

13 May 2024, 09:00 → 16 May 2024, 20:20 Asia/Shanghai

Register now

Join us for fascinating lectures, engage with fellow researchers from across the globe and discover cutting-edge exploration of porous media. 

Please consider making a donation to InterPore Foundation in any amount to enable the participation of your fellow researchers.

The Focus Theme of InterPore2024 will be “porous media and biology.” This includes occurrence and applications of biology in living organs, plants, and in medicine, as well as in soil, oil and gas reservoirs. It will include theories and (bio)physics, experiments, imaging, mathematics, and modelling.
 

Topics and applications

Transport phenomena     Swelling and shrinking porous media     Multiphysics-multiphase flow     Reservoir engineering     Soil Mechanics and Engineering     Geothermal energy     CO2 sequestration     Constitutive modeling     Wave propagation     Energy Storage

Biotechnology Biofilms Thin and nanoscale poromechanics Fuel cells and batteries Food Paper and textiles Filters, foams, membranes Fibers and composites Ceramics and constructions materials Other porous media applications

 

---

Event Management

book-of-abstracts.pdf

InterPore2024 Program.pdf

InterPore2024 Terms and Conditions

LaTex Template for Conference Proceedings

Springer Guidelines for Authors of Proceedings

Visa Letter InterPore2024

Word Template for Conference Proceedings

Monday, 13 May

09:00 → 09:55 Plenary/Invited: Plenary Session I

09:10 Reservoir Simulator Development: The Past, Present and Future

Reservoir simulators have been developed in the past 70 years. They have been widely used to predict, understand, and optimize complex physical processes in modeling and simulation of multiphase fluid flow in petroleum reservoirs. These simulators are important for understanding the fate and transport of chemical species and heat and maximizing the economic and environmental performance of exploration and production of fossil fuel energy.

The development of reservoir simulators has been concentrated on conventional oil and gas reservoirs in the last century, and efficient black oil, compositional and thermal simulators have been successful in their application to the recovery of conventional oil and gas resources. As these conventional resources dwindle, the recovery of unconventional oil and gas (such as heavy oil, oil sands, tight and shale oil and gas, and coalbed methane) resources is now at the center stage. While the development of unconventional reservoir simulators has been focused on in this century, a lot of challenges still exist because of the significant differences between conventional and unconventional reservoirs in their multi-scale phenomena, fluid occurrence states, flow mechanisms, and production technologies.

The speaker has engaged in the development of reservoir simulators for over 30 years. His group has developed parallel and intelligent simulators that can efficiently simulate complex fluid flow problems with giga (billion) grid block cells and reduce simulation time from days to seconds. For over ten years, his group has also incorporated artificial intelligence (AI) and quantum computing algorithms into these reservoir simulators. Fast and accurate simulators can increase energy production due to full utilization of available data and better understanding of the chemical and physical mechanisms involved, process designs and uncertainty analyses. In this plenary presentation, the speaker will give an overview on the development of conventional and unconventional reservoir simulators, the incorporation of parallel and AI algorithms into these simulators, and the quantum computing potential to solve reservoir simulation problems. The present status, existing challenges, and future prospects on reservoir simulators will be emphasized in this plenary presentation.

Speaker: Zhangxing (John) Chen

09:55 → 11:25 Poster: Poster Session I

09:55 A molecular simulation study on adsorption and diffusion behaviors of hydrogen, methane and carbon dioxide

Because underground hydrogen storage offers the potential for large-scale, long-term storage of hydrogen, understanding the adsorption and diffusion behaviors of hydrogen and cushion gas in the reservoir is critical to understanding the underlying mechanisms that control hydrogen storage and transport. Using molecular simulation methods, we investigated the adsorption and diffusion behaviors of hydrogen, methane and carbon dioxide in kaolinite slit pores (10 MPa and 303 K), respectively. The distribution characteristics, excess adsorption amounts, diffusion coefficients and gas-solid interaction energies of the three gases in the slit pores were analyzed. Near the pore wall surface, carbon dioxide formed a distinct double adsorption layer, methane formed a smaller second adsorption layer, and hydrogen formed a single adsorption layer. The order of excess adsorption amount is carbon dioxide > methane > hydrogen. The rank of diffusivity of gases under the same conditions is hydrogen > methane > carbon dioxide. The interactions between gases and pore walls are in the following order: carbon dioxide>hydrogen>methane. Van der Waals interactions dominate. However, hydrogen and carbon dioxide have significant coulombic interactions with the pore walls, while methane has negligible coulombic interactions with the pore walls. The minerology of the formation results in different charges on the pore surfaces, which has a significant effect on gas storage. This study provides better insights into the mechanisms of hydrogen and cushion gas storage, thus providing a theoretical basis for underground hydrogen storage site selection.

Speaker: Zhenxiao Shang (China University of Petroleum (East China))

09:55 A new model of foam resistance factor based on NMR experiments

Foam flooding can improve the development effect of chemical flooding by increasing the flow resistance. According to the theory of critical capillary force, the water saturation of stable foam is the key factor of flow resistance of foam system. The conventional models for calculating flow resistance are mostly based on empirical formulas. The process of foam formation and stabilization cannot be characterized in empirical formula. Based on the critical capillary force theory, the foam system is stable when it reaches the critical water saturation, but the current experimental methods are difficult to accurately measure the critical water saturation, and cannot establish a flow resistance calculation model considering the foam flow theory.
In this paper，the online nuclear magnetic resonance visualization experimental system for oil and gas displacement from Suzhou Newmai Company (magnetic field strength: 0.3 ± 0.05T) was used. We conducted experiments on the influence of different gas water ratios, permeability, displacement rates, and other experimental conditions on flow resistance. Determine the saturation of the displacement phase during each experimental process based on T2 spectral changes, and use a pressure sensor to measure the displacement pressure. Through the analysis of the experimental results, the rising pressure water saturation and the critical water saturation of the foam are determined in each experiment. Combined with the fractional flow model, a new resistance factor model with multiple undetermined coefficients is established. By fitting the experimental results, the undetermined coefficients were determined, and a program for calculating the seepage law of one-dimensional gas water two-phase foam flooding was developed using C++ programming language.
The experimental results show that in the process of foam flow, with the increase of injected foam injection volume, the water saturation gradually decreases, but the plugging resistance factor remains almost unchanged. When the water saturation decreases to about 0.6, the resistance factor increases rapidly, and the water saturation is the rising pressure water saturation of foam; When the liquid saturation decreases to around 0.38, the resistance factor gradually stabilizes, and effective sealing is formed in the rock core. At this time, the water saturation is the critical saturation. Obviously, the flow resistance of foam is directly related to the starting pressure water saturation and critical water saturation; There is a quantitative relationship between the rising pressure water saturation, critical water saturation, gas water ratio, permeability, and displacement rate. A new flow resistance model that can characterize the theory of foam formation and collapse is established, and the parameters of the new model are determined through the experimental results. The model was used to calculate the gas and water flow changes in the process of foam flooding. On this basis, the foam flooding flow calculation program can calculate one-dimensional core pressure, gas and water saturation and other parameters change. Compared with the results of online nuclear magnetic resonance experiments, the fitting accuracy can reach 96%. The new model realizes the accurate calculation of the evolution mechanism of foam and the plugging effect of foam in the seepage process of foam.

Speaker: Ms Lina Shi (China University of Petroleum(East China))

Interpore展板.pdf

09:55 A novel CO2-responsive microgel for in-depth conformance control in CO2 enhance oil recovery (EOR)

CO2-EOR (enhanced oil recovery) represents one of the most cost-effective methods for achieving carbon neutrality. However, CO2 flooding encounters serious preferential flow in porous mediums, which significantly reduce the economic benefits of CO2-EOR and exacerbate the risk of CO2 leakage. This study synthesized a tertiary amine-based, CO2-responsive microgel. The microgel possesses a particle size of ~7.50μm in neutral formation water and expands to 2-4 times upon contact with CO2, thereby offering advantages in deep profile modification and selective CO2 plugging. Core flooding experiments confirmed the microgel's effectiveness in deep profile modification and EOR in heterogeneous reservoirs.

Speaker: Qihui Wu

09:55 A Robust Vapor-liquid-liquid Equilibrium Calculation Algorithm Considering Capillary Pressure and Critical Shift in Nanopores

Porous media contains a huge amount of nanopores, and the behavior of confined fluid phases in nanopores will be affected by significant interfacial effects between the fluids and the walls. A large number of publications have recently investigated the influence of interfacial effects on the phase behavior of confined fluids in nanopores. Many influences such as adsorption, critical shift, capillary pressure have been discussed. However, most of these studies have focused only on vapor-liquid equilibrium (VLE), and few attempts have been made to generalize these influences to vapor-liquid-liquid equilibrium (VLLE) in nanopores. In this work, a robust and efficient algorithm for the calculation of VLLE is proposed. The algorithm can simultaneously consider the influences of capillary pressure and critical shift on VLLE in nanopores. In order to be able to accurately and efficiently calculate each of the possible phases, the algorithm adjusts some of the steps in the conventional VLE calculation and improves the solution methodology.

The results of VLLE in this algorithm are obtained from three-phase flash calculations. It is well known that three-phase flash calculations are extremely dependent on initial guess and have poor convergence properties. In order to solve this problem, this work couples the successive substitution iteration with the Newton-Raphson iteration and builds a joint solver. The results show that this coupled joint solver not only improves the computational efficiency, but also enhances the stability of the flash calculations.

The robustness of the present algorithm is verified by several computational examples, and influences of capillary pressure and critical shift on VLLE in nanopores are investigated. In this work, mixtures of hydrocarbons with water and carbon dioxide were calculated and several possible fluid distribution scenarios were considered. The computational results show that both capillary pressure and critical shift can change the phase distribution of the confined fluid in nanopores.

1. The effect of capillary pressure on phase behavior is determined by the wettability between nanopores and the confined fluids. When the nanopores have a higher affinity for the vapor phase than the liquid phase, the generation of the bubble point will be advanced and the generation of the dew point will be lagged. If wettability is reversed, the effect of capillary pressure on phase behavior of the system is also reversed at the same time.
2. Critical shift affects the phase behavior of confined fluids more than capillary pressure for a certain range of pore sizes. However, the critical shift is independent of the wettability. Regardless of the pore size, the effect of critical shift on phase behavior has the same trend.
3. The effect of pore size on the behavior of confined fluids is nonlinear. In other words, there is an inflection point in the trend of pore size versus the phase behavior, and when the pore size is higher than this inflection point, the effect of capillary pressure or critical shift can be neglected when calculating the VLLE. Based on the findings of this work, we believe that this inflection point lies around 100 nm.

Speaker: Binyao Xiao (China University of Petroleum (East China))

09:55 A Study on Stochastic Modeling of Channelized Reservoirs Based on Reinforcement Learning

Channelized reservoirs, formed by ancient river sands, play a crucial role in oil and gas reservoirs. Their subsurface nature, however, poses significant challenges in direct visualization and characterization. This paper presents a novel approach to model these reservoirs by applying Q-learning, a machine learning technique. We redefine the reservoir modeling problem within a Q-learning framework, where well locations form the state space, and the reward mechanism differentiates between channel and non-channel wells. Our method utilizes the adaptive learning ability of Q-learning to predict the channel path, aiming to maximize the cumulative reward of identifying channel wells while minimizing traversal through non-channel wells. We extend our study by conducting multiple simulations and applying the results to porous media flow field simulation, which serves to test geological uncertainties. This not only provides a deeper understanding of channelized reservoirs but also showcases the potential of machine learning techniques in analyzing large datasets for geological exploration and characterization. Comparative results with traditional stochastic walk algorithms affirm the effectiveness and accuracy of our approach, offering new insights into the modeling of porous media.

Speaker: Ms Xiufan Zhang (QUST)

09:55 Archaea community in gas hydrate-bearing sediments in the South China Sea

The South China Sea, endowed with abundant natural gas hydrate resources, presents exceptional conditions for gas hydrate formation and exploration prospects. Gas hydrate-bearing sediments are characterized by methane saturation in pore waters, fostering rich and distinctive microbial ecosystems. These microorganisms play crucial roles in methane production, consumption, and global carbon cycling. This study focuses on 117 sediment samples from 11 sites across the Qiongdongnan Basin, Shenhu area, and Xisha Trough of the South China Sea , employing high-throughput MiSeq sequencing of the 16S rRNA gene to investigate the archaeal community structures and diversity. Our findings highlight significant microbial diversity variance across samples from the three geographic regions, with distinct differences noted between samples from the Qiongdongnan Basin and Shenhu area. The archaeal population is dominated by Halobacterota, Hadarchaeota, Lokiarchaeota, Euryarchaeota, and Woesearchaeota. Notably, methane-metabolizing taxa are prevalent, with a significant abundance of methanogenic archaea over anaerobic methane-oxidizing archaea (ANME). Additionally, the structure of methane-metabolizing groups varies significantly across the three regions, with ANME predominantly identified in the Qiongdongnan Basin. Methanogens show differing dominance in the Shenhu area compared to the Qiongdongnan Basin, and only a few methanogenic groups were observed in the Xisha Trough samples. This study provides the characteristics of archaeal community diversity within sediment cores from gas hydrate-bearing sediments in the South China Sea, contributing to our understanding of microbial group characteristics in these regions. Understanding these microbial populations and their functions is crucial for the comprehension of the biogeochemical processes involved in the formation of natural gas hydrates in the South China Sea.

Speaker: 思炜 刘 (北京大学)

09:55 Attenuation Patterns of Low-Frequency Hydraulic Pulse Waves in Porous Media with Different Permeability

Hydraulic pulsing is a widely used technology for cleaning, hydro-shredding, and soil improvement. In recent years, low-frequency hydraulic pulses have been used in oil and gas development, such as wellbore blockage removal and EOR. The effectiveness of this process depends on the attenuation pattern of the hydraulic pulse wave in the reservoir. In this paper, a numerical model of low-frequency hydrodynamic pulsed wave propagation in porous media is constructed and experimentally verified. The finite element method was used to solve the model and analyze the radial attenuation patterns of low-frequency hydraulic pulse waves in porous media with varying permeability. The results indicate that the rate of attenuation of the energy (pulse amplitude) of the hydraulic pulse wave with distance is significantly affected by the permeability of the porous medium. The rate of attenuation exhibits a pattern of deceleration, acceleration, and then deceleration again as distance increases. As the hydraulic pulse frequency is 0.1Hz, the pulse amplitude is 10MPa, and, the pulse amplitude attenuates faster along the path as the permeability decreases and is mainly concentrated within 0.5-2.5m around the wellbore. Specifically, the pulse amplitude attenuation to 20% corresponds to a propagation distance of 1.8 m in the 1 mD porous media, 2.7 m in the 200 mD porous media, and 6.8 m in the 1000 mD porous media. The pulse amplitude gradually decreases within 0.5 meters around the wellbore, which may be attributed to the impact of reflected waves. In a porous medium with a permeability of 100 mD, reducing the pulse frequency (0.1-30 Hz) can effectively decrease the interference between different wave levels during propagation and slow down the attenuation rate of pulse amplitude with distance. As distance increases, the effect of pulsation amplitude on attenuation decreases, and the degree of attenuation becomes similar for different amplitudes. For reservoirs with specific permeability, it is recommended to adjust the hydraulic pulse parameters to a lower frequency and higher amplitude to achieve a longer effective distance and better results.

Speaker: Mr Kai Wang (China University of Petroleum (East China))

09:55 Brinkman double-layer model for flow at a free-porous interface

The phenomenon of the Stokes–Darcy flow in coupled systems comprising a clear channel and a complex 3D porous medium is investigated through numerical and theoretical approaches. A quartet structure generation set (QSGS) method is used to generate random complex 3D porous structures imitating real structures in nature. Pore-scale flow simulations are performed using the Lattice Boltzmann method, enabling detailed analysis and characterization of the interfacial flow phenomena. Four key parameters with clear physical meanings are introduced to capture essential aspects of the flow dynamics quantitatively, revealing intriguing linear relationships with the square root of permeability – a fundamental characteristic length scale dominating the phenomenon. Several existing models are examined by these parameters. A Brinkman double-layer(BDL) model is proposed to address the limitations of existing models. Compared with several classic models, the present BDL model stands out due to its simplicity, accuracy, and robustness, providing a comprehensive understanding of the complex flow behavior in the coupled system.

Speaker: Jinliang Kang (Tsinghua University)

09:55 Bypass flow of trapped droplet under seismic stimulations through pore double model analysis

The study of trapping and releasing nonwetting droplets in porous materials has been extensively explored. However, dynamically characterizing residual nonwetting droplets under vibrations within porous media remains a challenging endeavor. Current theoretical models addressing seismic responses in two-phase flow primarily focus on single-channel geometries with fixed pressure differentials across inlet and outlet boundaries. In practical porous media, trapped droplets exist amidst flowing aqueous phases. External vibrations can induce significant pressure fluctuations due to surrounding flows, making the fixed pressure differential assumption invalid in a single-channel model. To overcome these constraints, this study delves into the micro-scale dynamics, aiming to surpass the limitations of the single-channel model. A theoretical framework involving a pore doublet, i.e., a sinusoidally constricted channel paralleled with a straight channel, is proposed to account for bypass flow effects. Initially, we analyze alterations in pressure differentials upstream and downstream of residual nonwetting droplets, considering flow dynamics during seismic excitation. We evaluate the impact of these pressure differential variations on predictive accuracy compared to the fixed pressure differential assumption in the single-channel model. Employing the pore doublet theoretical model, we examine how the permeability of parallel straight channels influences the dynamic response of residual nonwetting droplets. Furthermore, we compare predictive discrepancies between the single-channel and pore doublet models, integrating bypass flow, to determine critical acceleration amplitudes for releasing residual nonwetting droplets at different frequencies. Ultimately, we uncover the competitive interaction between the seismic response of residual nonwetting droplets at pore throats and bypass flow in surrounding pores. These research findings establish a robust theoretical foundation for comprehending seismic impacts on engineering, geological implications, and the potential incubation of geological disasters within the geological and environmental domains.

Speaker: Wen Deng (Southeast University)

09:55 Density-Dependent Dynamics of Fines Retention and Pore Clogging in Rock Formations: A CFD-DEM Approach

In the realm of geosciences, the phenomenon of fines migration and subsequent clogging in rock formations presents a complex challenge. This process can occur even when fines are smaller than a specific threshold size, known as the critical throat diameter. The dynamics of pore clogging involve interactions on multiple scales - ranging from the transport at the pore level to the mechanical and hydraulic behaviors at the colloid level, down to the electrochemical interplays at sub-colloid scales. Traditionally, the Colloid Filtration Theory (CFT) has been the go-to model, focusing on predicting how colloidal particles are retained under the assumption of clean bed conditions. This overlooks the significant impact of particle aggregation and clogging at the throat passages. While experimental measurements are ideal for assessing filtration efficiency, they fall short in directly examining the intricate movements and paths of particles at the pore level, especially due to the opaque nature of the media involved. Numerical models addressing the full scope of forces in pore clogging have been limited to two-dimensional simulations of rock structures. This research advances the field by employing a combined fines tracking method that integrates Computational Fluid Dynamics (CFD) with a Discrete Element Model (DEM). The approach is designed to predict the retention and clogging of fines, factoring in surface forces and the impact of gravity forces due to density variations between the fines and the saturating brine.

To accurately represent the complex pore structures and simulate particle movement within the rocks, we use a three-dimensional X-ray computed microtomography image of Bentheimer sandstone. An innovative feature of our method is the use of a dynamically adaptive CFD mesh, which refines itself in areas dense with particles to better resolve the intricate fluid flow around them. We track particle trajectories and link them to specific pores and throats within the rock sample. Furthermore, we apply a method to compare the pair-wise trajectories of particles with different density, injected in a flux-weighted procedure through the inlet. This allows us to analyze how particle retention varies within the sandstone, considering the flow direction for fines with different densities. For heavier fines, we observe an interesting spatial variation in particle trapping, suggesting that gravity aids their movement in the direction of gravitational pull, but hinders it along the flow path. Our findings reveal that denser fines can move further along the flow path due to two key mechanisms: their ability to pass through gravitationally lower throats and the alterations in flow pathways caused by pore clogging.

Speaker: Shitao Liu

09:55 Direct Pore-Scale Simulation of the Effect of Wettability Alteration by Low-Salinity on Oil Mobilization in 3D Natural Sandstone

Wettability is an important factor controlling the pore-filling mechanism and displacement efficiency in the subsurface pore space. The trapped phase can be mobilized by wetting alteration, which is one of the main mechanisms of enhanced oil recovery technologies, such as surfactant flooding and low-salinity water flooding. Despite recent advances in the simulation of wetting alteration at the core scale or beyond, there are very few works that have modeled the wettability alteration at the pore scale, especially in three-dimensional (3D) micro-CT images, causing fluid displacement and retrapping mechanisms during wettability alteration are not well understood. With this objective, a wettability alteration model by low-salinity is developed and implemented in the open-source computational fluid dynamics software OpenFOAM (Open Source Field Operation and Manipulation), where both the Navier-Stokes equations for oil/water two-phase flow and the advection-diffusion equation for species transport are solved. The proposed model is validated against a published sinusoidal channel micromodel and then applied to 3D micro-CT images of sandstone to investigate the interplay between wettability alteration and pore structure. This study takes into account the effect of initial wettability, different degrees of wettability alteration, different time scales of wettability alteration, and different injection scenarios on oil trapping and the ultimate oil recovery factor. A larger degree of wettability alteration results in a higher oil recovery factor during tertiary low salinity water flooding. However, the oil recovery factor will first increase and then decrease with the increase of wettability alteration degree due to the snap-off effect during secondary low salinity waterflooding. In tertiary low salinity waterflooding, a lower wettability alteration time scale under the same degree of wetting alteration produces more oil. This study emphasizes the important interplay between wettability alteration, pore structure, and time scale during low salinity water flooding, and can explain some observations in recent micro CT experiments.

Speaker: Haoyun Li (China University of Petroleum (East China))

09:55 Dynamic Effects on Solute Transport in an Unsaturated Soil

The influence of flow regime and soil saturation on solute transport processes is significant, yet the associated effects have not been adequately addressed. To address this gap, we conducted three sets of solute transport experiments in a sandy soil, complemented by numerical modeling, under both steady-state and dynamic drainage conditions. The results from steady-state experiments revealed a non-monotonic relationship between dispersivity and saturation.Both classical advection-dispersion and dual-porosity (mobile-immobile) type transport equations were used to simulate the measurements. The fitted well defined dispersivity -saturation function was employed to the simulations of dynamic experiments. Taking into consideration the dynamic capillarity effect, our model accurately simulated solute transport processes and flow. Contrary to previous reports, our findings suggest that the flow regime does not significantly impact the dispersivity of solute transport.

Speaker: Luwen Zhuang (Sun Yat-sen University)

09:55 Ensemble Variational Bayesian Uncertainty Quantification for High Dimensional Nonlinear Parameter Inversion of Darcy Flows in Porous Media

The inversion and uncertainty quantification of parameters associated with governing PDEs are important in many scientific and engineering problems. For example, petroleum reservoirs are typically heterogeneous and uncertain due to the sparsity of hard data, and the uncertainty quantification of physical parameters associated with the governing PDEs of flows in porous media, given production history data, is a necessary step before reasonable forecasts can be made. Conventional history matching inversion methods are generally point-estimate, while uncertainty quantification using MCMC is computationally expensive. In the current study, an efficient ensemble variational Bayesian (EVB) uncertainty quantification method is developed for inverting high-dimensional parameters for the governing PDEs. Variational Bayes inference approximates the posterior using trial distributions such that the Kullback-Leibler divergence between the true posterior and the trial distribution can be minimised. In EVB, a reduced-order model is built using principle component analysis to enhance the convergence of small-size ensembles. The trial distribution is optimized simultaneously as the ensemble of realizations are updated by data assimilation. In particular, particle filtering is adopted for the nonlinear inverse problem under consideration. Two- and three-dimensional test cases of single- and two-phase Darcy flows in petroleum reservoirs are presented for validation.

Speaker: zhao zhang (Shandong University)

09:55 Experimental and theoretical evidence for energy signal indicating flow regimes for two phase flow in porous media

Many studies have been dedicated to examining flow regimes using two key parameters: viscous ratios and capillary numbers Ca. However, only a few studies have elucidated mechanisms that govern different flow regimes and how the work of displacement and surface aeras alter within porous media, as well as their influence on flow behavior is still unknown. In this study, we experimentally investigate the combined effect of wettability and flow rates on immiscible fluid-fluid displacement using high-resolution imaging in microfluidic flow cells with two different viscous ratios. We investigate morphology of oil cluster and displacement front and further calculate the relative change of energy conversion based on external work and surface energy. The morphology of invasion patterns in brine-silicone is sharper than that in brine-decane displacement, with the indication of larger ratios of length and width for fingers. The signature of the transition between the three regimes manifests itself in the efficiency of conversion of the external work to surface energy. Efficiency of conversion decreases with the increase of contact angles. With the increase of Ca, Efficiency of conversion reduces greatly to approximately zero. In high M displacement, efficiency of conversion is consistently higher than that in low M displacement. The signature of the transition between the three regimes (viscous flow, capillary dominated flow and capillary -stable displacement flow regime) manifests itself in the fluctuations of the external work and surface energy. We propose that it is possible to determine the nature of multiphase-flow displacement from the energy signal.

Speaker: Shuangmei Zou

09:55 Experimental Validation of Pore-Scale Models for Gas Diffusion Layers in PEMFCs

Pore-scale modeling developed over the past decades has become a powerful method to evaluate the effective transport properties of porous electrodes. Experimental verification for such a method is crucial to confirm the method's validity. In this study, experimental data of gas diffusion layer (GDL) are compared with results of pore-scale modeling. GDL microstructures are scanned and reconstructed by X-ray computed tomography. Explicit dynamic simulations based on the finite element method are performed on these reconstructed models to reveal the 3D displacement of the microstructure during compression. Over the deformed models, the effective diffusivity, thermal and electrical conductivities are then computed using a pore-scale model code. It is found that, as the compression ratio increases to 30%, the fiber displacement increases obviously with significant anisotropy, and the fibers gradually squeeze into nearby pores located in the adjacent layers inside GDL. The effective diffusivity and permeability decrease by about 15% and 35% respectively. The conductivity increases by 100% and 20% in the through-plane and in-plane direction respectively. The validated methods can support microstructure optimization and transport properties improvement for different types of porous electrodes.

Speaker: Prof. Liusheng Xiao (Ningbo University)

09:55 Exploring the Relation Between Soil Salinity on Soil Organic Carbon Dynamics in Global Terrestrial Ecosystems

Soil Organic Carbon (SOC) is a fundamental component of terrestrial ecosystems, connected to climate regulation, nutrient cycling, and soil health. The influence of soil salinity - referring to the concentration of soluble salts in the soil solution - on SOC content is acknowledged (1,2), but there is limited understanding regarding the precise direction and extent of SOC’s response to varying levels of soil salinity in real field conditions. This study explores the relationship between soil salinity and SOC content, necessary for understanding carbon sequestration processes, climate change mitigation, and terrestrial carbon stock stability. Using the SOC of 60,392 soil samples collected globally since 1950, we developed a statistical model (General Additive Model) and analyzed soil salinity’s relation with SOC dynamics while controlling the role of other environmental parameters. According to the results of the statistical analysis, we estimate that an increase in soil salinity from 1 to 5 dS m-1 would be correlated with a decrease in SOC, equivalent to dropping from 0.92 g kg-1 above the mean predicted SOC (31.77 g kg-1) to 6.34 g kg-1 below the mean predicted SOC (-700%), while considering other influencing environmental factors such as precipitation and temperature. Our results show the minor contribution of salinity to SOC while other factors such as climate, vegetation, and land management practices exert more substantial effects on SOC content. Key covariates in relation with SOC include soil nitrogen, anthropogenic phosphorous input, and soil pH. Additionally, our study estimates the effects of one standard deviation increases in soil salinity of the analyzed soil samples on topsoil (0 – 20 cm) SOC content, showing a 6.98% decrease in SOC. These findings highlight the importance of considering diverse factors in understanding SOC dynamics, providing insights into mitigating the impacts of soil salinity and climate change on terrestrial ecosystems.

Speaker: Prof. Nima Shokri (Hamburg University of Technology)

Interpore2024_Abstract_ID735_Soil salinity_SOC_correlation.pdf

09:55 Flow simulation of pore-scale deep shale gas under nano-confinement conditions

Deep shale gas will become an important part of supporting the growth of China 's natural gas production. Compared with the middle shale and shallow shale, the properties and porous flow laws of deep shale gas are more complex. The nano-confinement effects such as adsorption and slippage cannot be ignored in the study of porous flow mechanism of deep shale gas. When the porous flow law of deep shale gas on the pore scale, the influence of nano-confinement effect on the porous flow law needs to be further clarified. In this work, a pore network model containing water-wet inorganic pore throats and gas-wet organic pore throats is established, which conforms to the pore structure characteristics of shale in actual depth. And the permeability of shale gas under different wettability, slippage, adsorption and surface diffusion is studied. Viscous flow, Knudsen diffusion, adsorption, slippage and surface diffusion are considered in organic pores, viscous flow and Knudsen diffusion are considered in inorganic pores. Different TOC contents are set to study the influence of nano-confinement effect on deep shale gas flow and the flow law of shale gas. The results show that the porous flow of deep shale gas is greatly affected by adsorption and slippage. The surface diffusion of adsorbed gas in organic pores provides more flux for the flow of deep shale gas. When the TOC content is high, the flow of shale gas is mainly controlled by organic pores.

Speaker: Chaoyang Zhao (中国石油大学（华东）)

09:55 Flow-induced biomass and precipitate sloughing during engineered biomineralization

Bioaugmented microbially-induced carbonate precipitation (MICP) has been proposed for subsurface permeability modification over long distances, owing to the small size of Sporosarcina pasteurii and the use of aqueous reagents. One example application might be the remediation of leakage pathways distant from the wellbore at geologic $CO_2$ storage sites. For such applications to be realized, however, the quantity and distribution of precipitate must be readily tunable, and the precipitate must be resilient to the rapid flow rates expected in high-permeability zones. Therefore, the potential for shear-induced sloughing and bulk transport of both biomass and precipitates must be better understood. While biomass and precipitate sloughing have both been observed in empirical MICP studies, systematic exploration of how these processes affect the ultimate quantity and localization of precipitates is needed.

Prior work demonstrated that microbially-induced carbonate precipitate distribution along a 30cm column was highly correlated with initial biomass attachment. This study builds upon this earlier work to evaluate the impact of periods of rapid flow on precipitate distribution, following the attachment, growth, and/or mineralization phase of injection. Two injection strategies are investigated where either a “single-stage” or “multi-stage” mineralization is employed. A “single-stage” strategy entails the injection of growth medium components and dissolved calcium together, while a “multi-stage” strategy entails separation of the growth and mineralization phases of MICP. Taken together, these experiments establish: (1) Whether elevated flow rates are sufficient to promote biomass transport across longer distances and (2) Whether the resilience of precipitated carbonate to shear sloughing is dependent upon the injection strategy. These findings may inform future MICP models or field-scale trials by quantifying the expected degree of sloughing at each phase of injection, as a function of estimated pore-scale velocity.

Speaker: Eva Albalghiti (The University of Michigan)

09:55 Influence of non-stationarity within porous media sample on its flow properties

The structure of the sample defines its physical properties. The homogenization based on different fields (e.g., pressure and velocity for permeability property) produces general property of the sample. For this property to be useful for continuum-scale modelling it has to be representative for the volume it will be substituted for in the next level model. This explains the importance of conventional REV concept. To be a REV, the structure has to be statistically homogeneous [1], but this is not necessarily achieved in real porous media samples such as rocks and soils [2]. This is where pore-scale modelling gets really handy – we can still perform homogenization and substitute the averaged property. In this contribution we discuss the influence of spatial non-stationarity on flow properties using full permeability tensor [3,4] as an example. To establish interrelationships, we create artificial porous media structures with different degrees of non-stationarity using stochastic reconstruction methodology [5,6].
In this presentation we shall focus on:
- Methodology to produce porous media structures with different degree of anisotropy;
- Tensorial property assessment for such structures;
- Applications for real homogenization and upscaling cases.
The degree of stationarity of the stochastic reconstructions had a significant influence on the physical properties of the reconstructed binary structures—computed full permeability tensors showed different degree of anisotropy and off-diagonal terms values. The proposed approach to produce nonstationary structures from ensemble averaged set of correlation functions opens numerous ways to attack theoretical and practical problems with natural and artificial porous materials with statistically inhomogeneous structure. Moreover, it is possible to produce large scale inhomogeneous porous structures to parameterize, test and verify different upscaling schemes starting from pore-scale.

Speaker: Dr Marina Karsanina (Schmidt Institute of Physics of the Earth of Russian Academy of Sciences, Moscow, Russia)

09:55 Investigation of fault damage zones from direct shear tests and implications for hydraulic fracturing process

Hydraulic fracturing is an important stimulation technique for extracting resources from low-permeable formations. Apart from hydraulic fracturing (where pore pressure exceeds the minimum principal stress), hydraulic shearing (where pore pressure does not exceed the minimum principal stress) is an essential mechanism in forming the stimulated reservoir volume and controlling the ultimate stimulation results, especially for shale formations with layered beddings (Li et al., 2019). Shear failure in rocks will not only generate primary fractures but also cause stress alteration in the neighboring region around the primary fracture. Such stress alteration affects the rocks' stability and possibly induces more secondary fractures. This phenomenon is also known as fault damage zones, commonly observed in rock masses at different scales (Kim et al., 2004; Sui et al., 2019). In reality, it is almost impossible to directly observe the shear failure process in the subsurface. Therefore, in this work, we adopted an advanced dynamic direct shear testing device to break rocks (Qi et al., 2020) and a micrometer CT to observe the fault damage zones after the shear failure. Quantitative descriptions of the damage zone, such as fracture intensity, roughness, and connectivity, are summarized.
In this research, an independently designed dynamic direct shear testing device (Qi et al., 2020) was utilized to conduct in-house direct shear tests on layered shale specimens with various layer angles (0°, 30°, 45°, and 60°). Subsequently, the sheared shale specimens were scanned with a micrometer CT, and 3D digital cores were reconstructed. Fine segmentation of micron-scale fractures in inhomogeneous shale was achieved using multiple processing algorithms. Considering different bedding structural surfaces, the physical properties and geometrical features of 3D micrometer-scale fractures in shale were quantitatively evaluated. Parameters such as fracture density, 3D shape factor, roughness, Euler number, and morphological filtering were employed to subdivide the damage zones along the main fracture surface.
From the preliminary results, we divided the generated fractures into three categories based on their spatial distribution: the primary induced fracture, fractures in the connected damage zone, and isolated fractures. The range of damage zones varies significantly with different bedding angles. With the increase in bedding inclination, the density of fine fractures distributed along the primary shear fractures initially increases and then decreases, reaching the maximum in samples with 30°inclined layers. The roughness of primary fracture surfaces and secondary fractures in shale samples with different bedding angles displays significant anisotropy and asymmetry, with greater roughness observed at the microfractures and fractures in connected damaged zones. Morphological patterns of the three types of fractures are further discussed. An in-depth understanding of the fault damage zone provides valuable insights to evaluate and optimize the hydraulic fracturing process.

Speaker: Ms Zifang Zhu (Institute of Geology an Geophysics Chinese Academy of Sciences)

09:55 Isolation of Pseudomonas Aeruginosa SB23 from Upper Assam Oil Reservoir and its Applications in Enhanced Oil Recovery from Sandstone Reservoir Rocks

Objectives/Scope: The scope of this research work is to evaluate the ability of Pseudomonas aeruginosa strain (SB23) (Gen Bank accession number: OR051038) to enhance oil recovery from the porous sandstone reservoir rocks of depleted Oil fields of Upper Assam, India. In this paper, we describe a method for the isolation and identification of biosurfactant-producing microbial strain present in the formation water sample of the Upper Assam Oil reservoir. A protocol was developed for the production of biosurfactants from strain (SB23) grown in formulated media. Core analysis and microbial flooding were performed to understand the behavior of strain (SB23) and its interactions with the porous media of the sandstone reservoir rocks of Upper Assam Oil reservoirs.

Methods, Procedures, Process: Strain (SB23) was isolated from the formation water sample contaminated with crude oil. The formation water sample was collected from one of the wells of the Upper Assam oil field. Determination of the strain (SB23) has been done through 16S rRNA sequencing and an open-source web application server. The formation water sample was used for elemental analysis and based on that, the nutrient package was designed to produce rhamnolipid biosurfactant. The interfacial tension between crude oil and produced biosurfactant was measured using the spinning drop method. Microbial surfactant flooding in core samples was performed in a laboratory-based core flooding system.

Results, Observations, Conclusions: Pseudomonas aeruginosa OR051038 strain (SB23) was isolated in the laboratory and identified by biochemical test and 16S rRNA sequencing. Strain (SB23) which produced the rhamnolipid type of biosurfactant, was selected for surfactant flooding. The produced biosurfactant remained stable over a wide temperature range of 30-85 °C, pH of 2-10, and salinity of 0-16%, w/v. At the value of 126 mg/L, the biosurfactant solution exhibited critical micelle concentrations (CMC). The core flooding studies were performed in sandstone cores (3.5 ×8.4 cm) with an average of 23.72% porosity and 41.18 mD of permeability. (1.7 PV) of nutrient solution with 4% (v/v) inoculum was injected into cores and incubated for 7 days at 50 °C. 4000 mg/L of rhamnolipid was produced, which decreased IFT and ST to 0.98 and 24.8 mN/m respectively. Under reservoir conditions, the produced biosurfactant from strain (SB23) is used in microbial flooding to recover an additional 7.55% of heavy crude oil. This paper will discuss the ability of strain (SB23) and its applications in advanced Enhanced Oil Recovery (EOR) methods, particularly the Microbial Enhanced Oil Recovery method (MEOR).

Novel/Additive Information: As a result, the isolated strain (SB23) has the potential to significantly improve oil recovery from depleted oil fields of Upper Assam. This paper will benefit the Reservoir engineers, Production engineers, Petroleum engineers, and Petroleum Microbiologists interested in enhanced oil recovery processes and Field Development plans using advanced EOR applications. Chemical EOR is costly and not environmentally friendly, MEOR can be an alternative to them. In addition, MEOR is an advanced technology to enhance oil recovery from oil wells with high water cuts and also it can delay the decommissioning costs related to abandoned oil and gas wells.

Speaker: Saurav Bhattacharjee (Dibrugarh University)

09:55 Mechanism simulation on low salinity water flooding in high temperature sandstone reservoirs based on molecular simulation method

Low salinity water flooding (LSWF) is novel technique which can be used to improve oil recovery for sandstone reservoirs. Although considerable experimental research has been conducted to identify the underlying pathways, there are a lot of debatable issues with the mechanics. On the basis of molecular simulation (MS) method, the models of rock, oil and brine in different salinity and ions compositions were constructed. The interactions among rock, oil and brine and the influence of brine salinity and concentrations of ions on the process of separating oil from sandstone surfaces were studied. The temperature range considered ranged from 298K to 373K. That altering of the wetting state of a sandstone induced the detachment of oil from the surface of the rock, even under elevated temperatures. The results will provide essential molecular state information for change in the wetting state of rock and increase in oil recovery.

Speaker: Prof. Renyuan SUN (China University of Petroleum(East China))

09:55 Molecular dynamics simulation of ionic diffusion and mixing phenomena in polymer-enhanced low-salinity waterflooding

Various studies have confirmed that water salinity and composition significantly impact the efficiency of the waterflooding process. Field-scale operation of low-salinity water injection has been proven to be a cost-effective enhanced oil recovery (EOR) method as well as compatible with environmental regulations. The success of this technique relies on the contact of low-salinity water with the rock surface to alter the wettability of the rock to more water-wetting conditions. However, the salinity of the injected water increases, as it contacts the resident high-salinity reservoir brine which then significantly impairs the efficiency of this technique. Under flowing conditions, two main mechanisms affect the mixing phenomena: hydrodynamic dispersion and molecular diffusion. Our preceding laboratory research has clearly shown that if a small amount of polymer, such as HPAM (partially Hydrolyzed Polyacrylamide) is added to the injection low-salinity water it can significantly reduce the mixing zone by suppressing the diffusion and dispersion phenomena and increase the integrity of the fluid-fluid front. To gain a more in-depth understanding of this process, molecular dynamics simulations were performed to investigate the system at an atomic scale. Polymer molecules were introduced into the low-salinity water and the high-salinity and low-salinity waters were made laterally in contact, under no-flow conditions, to start mixing. Sensitivity analysis was performed on the main factors affecting this phenomenon such as the presence of polymer molecules, the effect of polymer concentration, the salinity of low salinity water, and the salinity of resident brine (i.e., the salinity difference). The results indicate that the time for full mixing is controlled primarily by the effective diffusion coefficient. By adding polymer, the polymer strands and their chemical interaction with the brine ions would act as a diffusion barrier and reduce the diffusivity of low-salinity water, enhance the viscosity, and delay the ionic diffusion phenomenon; thereby reducing the growth rate of the mixing zone. In all cases the mixing zone grew linearly with the square root of time; indicative of Fickian diffusive mixing. Once the diffusivity is reduced, the salinity profile becomes sharper, leading to a more effective low-salinity water effect, and less volume of injecting EOR agent is required at large scales.

Speaker: Prof. Hassan Mahani (Sharif University of Technology)

Interpore2024_Poster_Abdolmaleki_etal_Final.pdf

09:55 Molecular Simulation of the Effect of Imidazolium-Based Ionic Liquids on the Water/Toluene Interface

Crude oil is a complex mixture of organic compounds which are conventionally categorized as saturates, aromatics, asphaltene and resins based on their polarity and solubility. Aromatics, in particular, comprise a large portion of many light, medium and heavy oils therefore it is important to understand their interfacial properties with water and surfactants in the context of enhanced oil recovery. In this work, we explore the effect of imidazolium-based ionic liquids on water/toluene interface using molecular dynamics (MD) simulation. Imidazolium ionic liquids are cationic organic compounds comprised of a heterocyclic aromatic head with a saturated aliphatic chain. The MD simulations were based on classical OPLS and SPC/E force fields with the leap-frog numerical integration scheme, 1.2 nm cut-off for Lennard-Jones potential and particle mesh Ewald summation for the electrostatic interactions. The interfacial tension (IFT) for pure water and toluene was found to be 36.09 mN/m at 300 K and 1 bar which is close to the experimental value of 35 mN/m. Adding imidazolium chloride at a surface coverage of two molecules for every square nanometer slightly reduced the IFT to 32.71 mN/m for the butyl chain. For Ionic liquids with octyl and dodecyl chains, the IFT of water/toluene has been significantly reduced by approximately a factor of 2 and 8, respectively. Calculations of the interaction energy between the two phases shows that imidazolium cations with longer chains interact more strongly with Toluene, thereby effectively reducing the IFT. Furthermore, density profiles across the axial-direction perpendicular to the interface shows that the ionic liquids with longer alkyl chain partition more toward the interface whereas the butyl imidazolium have a low surface excess and are not as surface active as the octyl and dodecyl imidazolium. Therefore, imidazolium interacts with toluene more via its alkyl chain and the association between the toluene and the imidazolium aromatic head is limited at the water/toluene interface.

Speaker: Moataz Abu-Al-Saud (Saudi Aramco)

09:55 Numerical modelling of polymer support fluids permeating in sands

Polymer fluids, a blend of polymers in water, offer a cost-effective and environmentally friendly solution for supporting deep underground excavations. However, being non-Newtonian fluids, their full potential in construction projects is hindered by a limited understanding of their behaviors. In this study, we will employ a combined approach of DEM-based and micro-CT imaging techniques to explore the pore-space topology in sands. Utilizing this data and considering the fluid-solid interaction, we will then develop a fully-resolved numerical model to comprehensively investigate the distribution pattern of strain and stress within the fluid phase, as well as drag forces on sand particles. Our numerical results will be validated against large-scale experimental observations, and provide insights for the development of upscaling modelling techniques.

Speaker: Si Suo (Imperial College London)

09:55 Numerical Simulation of CO2 Enhanced Shale Gas Recovery and CO2 Sequestration under Coupled Stress-Strain and Adsorption-Strain

Shale gas as a relatively efficient and clean energy, has attracted more and more attention in recent years. At the same time, the climate crisis mankind faced is becoming more and more serious, in this context, carbon capture, utilization and storage (CCUS) is regarded as the best technical path to achieve carbon reduction and carbon neutrality. Since CO2 and CH4 exist in the surface of shale matrix at the same time, competitive adsorption will occur, and the adsorption capacity of CO2 in shale is better than that of CH4, and the adsorption site of CH4 can be occupied by CO2, which also replace CH4 from adsorbed state to free state. Using CO2 to enhance shale gas recovery and achieve CO2 storage (CO2-ESGR) can effectively improve shale gas recovery and reduce carbon emissions. In order to better explore the effects of reservoir adsorption characteristics, reservoir parameters and injection parameters on CO2-ESGR, which mainly considered Langmuir volume ratio, adsorption strain constant ratio, competitive adsorption parameters, initial porosity and pressure of reservoir, injection rate and timing, a new numerical model was established based on the coupled stress-strain model and adsorption-strain model of CO2-ESGR process. In this model system, only CO2 and CH4 components in shale reservoirs are considered for numerical simulation.

Speaker: Mr hongzhang wang (Chongqing University)

09:55 Optimization Methods for Sparse Linear Solvers in Reservoir Simulation

Due to the increasing scale and complexity of the reservoir simulation problems, solving linear systems from the equations for reservoirs often requires significant computational resources and time. Thus, the high performance acceleration for solving reservoir problems is crucial. This talk will introduce methods for the fast solution of reservoir problems, with special attention paid to sparse direct solver optimizations. The principles and applications will be presented, and the potential for enhancing computational efficiency on supercomputers will be emphasized as well.

Speaker: Weifeng Liu

09:55 Physical origin of adsorption heat and its significance in the isotherm equation

Adsorption heat is a cornerstone concept underpinning almost all the existing theoretical isotherms for porous media. Yet, it remains elusive what this concept stands for and what are the physical sources for it. Here, a rigorous thermodynamic formulation is derived for the adsorption process with the aid of the law of mass action, leading to an expression of adsorption heat as the external chemical potential difference between two adjacent adsorbate layers. The interaction between adsorbent and adsorbates like van der Waals is theoretically identified as the intermolecular source for the change of adsorption heat. Thereby, adsorption heat is formulated as a spatially varied function of the distance to adsorbent surfaces. This adsorption heat function facilitates the establishment of a two-parameter sorption isotherm equation. The equation can be theoretically converted to two widely used adsorption isotherm equations, namely Brunauer–Emmet–Teller (BET) and GuggenheimAnderson-de Boer (GAB) equations, and shows excellent performance in capturing experimental isotherm data of a wide array of materials. The comparative analysis demonstrates that the derived two-parameter isotherm equation outperforms the two-parameter BET equation and the three-parameter GAB equation in most cases. Such performance verifies the generality of the derived isotherm equation, thus further confirming the validity of the derived formulation of adsorption heat.

Speaker: Shaojie Hu (Hunan University)

09:55 Pore Network Analysis & Random Forest Modeling: Understanding Colloidal Transport in Porous Media

The transport and deposition of colloids in porous media are common phenomena in nature and industry. In this study, a pore network model (PNM) was used to model the geometry, flow field, and colloidal mass transfer of porous media. The finite element method (FEM) was utilized to establish a database of the contact efficiency ηt of the pore-scale collectors, and a random forest model (RFM) was trained. Reasonable prediction of ηt shows that the developed RFM greatly improves the computational efficiency and frees users from repeated numerical simulations. The effects of the colloidal size and seepage velocity on colloidal transport and the surface deposition behavior were studied, the ηt distribution in the PNM was determined, and breakthrough and retention curves were calculated. The results show that the ηt distribution width and mean value increase with the increase in the colloidal particle size and decrease with the increase in the seepage velocity in the range of colloidal particle sizes and seepage velocities considered in this paper. The peak concentration of the breakthrough curve decreases with increasing colloidal particle size and increases with increasing seepage velocity. Surface deposition produces exponential or uniformly shaped retention curves, with retention concentrations increasing with increasing colloidal particle size and decreasing with increasing seepage velocity. The evolution analysis of the retention curve revealed notable detachment and reattachment effects of the colloids in porous media. The results of this study have potential applications in various fields such as environmental remediation, groundwater management, and filtration technology optimization.

Speaker: Dr Shujie Tu (Hunan University)

09:55 Pore-scale Modeling of Dynamic CO2 Dissolution in Natural Porous Media with different Wettability

In oil-gas-water three-phase systems, CO2 can be distributed either as a non-wetting phase, or as an intermediate-wetting phase. The morphology and distribu-tion of CO2 clusters under different wetting sequences are different, which has a complex influence on CO2 dissolution process. Based on phase distribution ob-tained from three-phase flow experiment, we constructed the physical models of initial CO2 phase distribution, subsequently simulated the CO2 dissolution pro-cess when CO2 is non-wetting phase and intermediate-wetting based on the VOF framework and CST method. The dynamic evolution of CO2 clusters and dis-solved CO2 distribution during dissolution process was tracked. The effect of wettability on CO2 dissolution trapping in three-phase systems was revealed. The characteristic parameters of CO2 dissolution process were also analyzed quantita-tively. Our results showed that CO2 clusters exhibited different dissolution states under different wetting conditions in three-phase systems. When CO2 serves as intermediate-wetting phase, the initial phase distribution is more dispersed, and the size of CO2 clusters is smaller, the CO2 saturation decreases more within the same time period, indicating that CO2 has a higher dissolution ability. The initial CO2 saturation determines the final CO2 concentration in the other phase. Disso-lution caused the originally connected large CO2 clusters to decompose into mul-tiple small clusters. When CO2 serves as intermediate -wetting phase, the mass of dissolved CO2 is higher, and thus the dissolution ability is higher.

Speaker: Jinlei Wang

09:55 Quartz wettability alteration in underground hydrogen storage: insights from molecular dynamics simulations

Underground hydrogen storage (UHS) is considered as a primary approach for large-scale H2 storage, where the wettability of rocks/minerals is crictial to ensuring storage safety and efficiency. Despite numerous experiments and simulations, reported data on the rocks/minerals wettability shows significant disparity. In this work, employing molecular dynamics simulations, we systematically investigate the influence of temperature, pressure, and surface chemistry on quartz wettability under UHS conditions. We find that surface chemistry is a pivotal factor controlling quartz wettability, with higher hydroxylation of the quartz surface corresponding to stronger wettability and a smaller contact angle. In contrast, the temperature and pressure play a secondary role in influencing quartz wettability. We also examine the influence of methane (CH4) proportion in H2–CH4 mixtures on quartz wettability, and we show that increasing methane proportion leads to significantly weaker wettability (larger contact angle) of the quartz surfaces with low hydroxylation, while the impact on those with high hydroxylation is minor. We further unveil the mechanisms hindering the transition of quartz wettability, namely, the strong water–quartz interactions and the pinning effect at the three-phase contact line. Our findings and conclusions deepen the understanding of the rocks/minerals wettability alteration, providing theoretical insights for the safe and efficient H2 storage.

Speaker: Hubao A (Wuhan University)

09:55 Research on the development mechanism of core-scale fracturing-flooding

The low-permeability reservoirs are very compact, difficult to develop, and the recovery factor is low. Fracturing-flooding technology can effectively improve the pore structure of low permeability reservoirs, communicate reservoir seepage channels, and then improve oil recovery. In order to study the mechanism of fracturing-flooding, a physical simulation experiment of fracturing-flooding was carried out at the core scale. Firstly, the influencing factors of breakdown pressure were studied by conducting fracturing-flooding experiments with chemical agent of different viscosities for cores with different permeability. Based on CT scans, the distribution and morphology of fractures during the fracturing-flooding process were studied. Finally, based on nuclear magnetic resonance, the fracturing-flooding experiment was carried out on the oil-bearing core, and the range of oil-bearing pores for pressure driving was studied. The results show that the breakdown pressure of rock samples decreases exponentially with the increase in rock permeability, rises with the increase in the viscosity of chemical agent, and the increase rate changes from fast to slow, and finally tends to flatten. Under the condition of high-pressure and high-displacement injection of low-viscosity chemical agent, the core forms a criss-cross fracture network. Under the condition of high-pressure and high-displacement injection of high-viscosity chemical agent, the core forms a vertical fracture with double wings. Compared with conventional water flooding, the utilization degree of fracturing-flooding for small and medium-sized pores is significantly improved. Our research on the fracturing-flooding mechanism at the core scale has certain guidance for the efficient exploitation of unconventional oil reservoir.

Speaker: Liyuan Dong (China University of Petroleum (East China))

09:55 Reversing capillary trapping of nonaqueous fluid from dead-end structures by nanoparticle suspension and their self-adaptive control in complex porous media

We report an anomalous capillary phenomenon that reverses typical capillary trapping via nanoparticle suspension and leads to a counterintuitive release of nonaqueous fluid from dead-end structures under weakly hydrophilic conditions. Fluid interfacial energy drives the trapped liquid out by hierarchical surfaces: the nanometric roughness formed by nanoparticle adsorption transfers the molecular-level adsorption film to hydrodynamic film by capillary condensation and maintains its robust connectivity, then the capillary pressure gradient in the dead-end micrometric structures drives trapped fluid motion out of the pore continuously. The developed mathematical models agree well with measured evolution dynamics of released fluid. This reversing capillary trapping phenomenon via nanoparticle suspension may be a general event in a random porous media and could dramatically increases displacement efficiency. Our findings have implications for manipulating capillary pressure gradient direction via nanoparticle suspensions to trap or release the trapped fluid from complex geometries, especially for site-specific delivery, self-cleaning, or self-recover systems.

Speaker: Dr Wenhai Lei (KTH Royal Institute of Technology)

09:55 Sand migration during natural gas hydrate dissociation within unconsolidated sediment

Sand production is one of the main obstacles restricting gas extraction efficiency and safety from marine natural gas hydrate (NGH) reservoirs. Particle migration within the NGH reservoir dominates sand production behaviors, while their relationships were rarely reported, severely constrains quantitative evaluation of sand production risks. This paper reports the optical observations of solid particle migration and production from micrometer to mesoscopic scales conditioned to gravel packing during depressurization-induced NGH dissociation for the first time. Theoretical evolutionary modes of sand migration are established based on experimental observations, and its implications on field NGH are comprehensively discussed. Five particle migration regimes of local borehole failure, continuous collapse, wormhole expansion, extensive creeping, and pore fluidization are proved to occur during depressurization. The types of particle migration regimes and their transmission modes during depressurization are predominantly determined by initial hydrate saturation. In contrast, the depressurization mainly dominates the transmission rate of the particle migration regimes. Furthermore, both the cumulative mass and the medium grain size of the produced sand decrease linearly with increasing initial methane hydrate (MH) saturation. Discontinuous gas bubble emission, expansion, and explosion during MH dissociation delay sand migration into the wellbore. At the same time, continuous water flow is a requirement for sand production during hydrate dissociation by depressurization. The experiments enlighten us that a constitutive model that can illustrate visible particle migration regimes and their transmission modes is urgently needed to bridge numerical simulation and field applications. Optimizing wellbore layout positions or special reservoir treatment shall be important for mitigating sand production tendency during NGH exploitation.

Speaker: Yanlong Li (Qingdao Institute of Marine Geology)

09:55 Shale Multiscale Pore Network Model Construction

Shale reservoirs exhibit complex pore structures with pore size distributions ranging from nanometers to micrometers, coupled with the development of numerous microfractures. Accurate and efficient characterization of the pore structure in shale reservoirs is fundamental and critical for shale oil and gas development. Digital rock and pore network models (PNM) are effective methods for studying rock properties. In this study, we combined multiscale scanning techniques, specifically, low-resolution X-ray computed tomography (X-CT) imaging and high-resolution large field of view scanning electron microscopy (SEM-MAPs), constructed a multiscale PNM. Initially, a coarse-resolution PNM was extracted based on the X-CT images of real shale samples. However, due to the low resolution, many micropores in the shale matrix could not be identified. Therefore, high-resolution MAPs were utilized to obtain images of matrix micropores. Using Markov Chain Monte Carlo (MCMC), a digital rock core representing matrix micropores was constructed, and its PNM was extracted. Subsequently, by searching the spatial domain of the shale matrix in the physical space of the coarse-resolution PNM, the PNM of matrix micropores was incorporated. The connectivity information of the throats was obtained through the statistical information of the added PNM, ensuring that the radius was smaller than the pore radius at both ends. Finally, a multiscale pore network model was obtained. By comparing the pore size distribution of the experimental data and the multiscale PNM, the structural accuracy of the proposed model was evaluated. Furthermore, the permeability calculation values were compared with direct simulations to assess the flow characteristics of the proposed model. In conclusion, the multiscale PNM developed in this study comprehensively reflects the pore space in shale reservoirs and possesses advantages in accurately characterizing pore features. This research outcome holds significant theoretical and practical implications for shale oil and gas exploration and development in the petroleum industry.

Speaker: Huapeng Jing (China University of Petroleum（East China）)

09:55 Stability, deformation and rupture of Janus oligomer enabled self-emulsifying water-in-oil microemulsion droplets

Microemulsions exist widely in nature, daily life and industrial manufacturing processes, including petroleum production, food processing, drug delivery, new material fabrication, sewage treatment, etc. The mechanical properties of microemulsion droplets and a correlation to their molecular structures are of vital importance to those applications. Despite studies on their physicochemical determinants, there are lots of challenges of exploring the mechanical properties of microemulsions by experimental studies. Herein, atomistic modelling was utilized to study the stability, deformation, and rupture of Janus oligomer enabled water-in-oil microemulsion droplets, aiming at revealing their intrinsic relationship with Janus oligomer based surfactants and oil structures. The self-emulsifying process from a water, oil and surfactant mixture to a single microemulsion droplet was modulated by the amphiphilicity and structure of the surfactants. Four microemulsion systems with an interfacial thickness in the range of 7.4–17.3 Å were self-assembled to explore the effect of the surfactant on the droplet morphology. By applying counter forces on the water core and the surfactant shell, the mechanical stability of the microemulsion droplets was probed at different ambient temperatures. A strengthening response and a softening regime before and after a temperature-dependent peak force were identified followed by the final rupture. This work demonstrates a practical strategy to precisely tune the mechanical properties of a single microemulsion droplet, which can be applied in the formation, de-emulsification, and design of microemulsions in oil recovery and production, drug delivery and many other applications.

Speaker: Yuequn Fu (University of Oslo)

09:55 Stress sensitivity analysis of vuggy porous media based on fractal theory

Interparticle pore space and vugs are two different scales of pore space in vuggy porous media. Vuggy porous media widely exists in carbonate reservoirs, and the permeability of this porous media plays an important role in many engineering fields. It has been shown that the change of effective stress has important effects on the permeability of vuggy porous media. In this work a fractal permeability model for vuggy porous media is developed based on the fractal theory and elastic mechanics. Besides, a Monte Carlo simulation is also implemented to obtain feasible values of permeability. The proposed model can predict the elastic deformation of the fractal vuggy porous media under loading–unloading stress cycles, which plays a crucial role on the variations of the permeability. The predicted permeability data based on the present fractal model are compared with experimental data, which verifies the validity of the present fractal permeability model for vuggy porous media. The parameter sensitivity analysis indicates that that the permeability of stress-sensitivity vuggy porous media is related to the capillary fractal dimension, capillary fractal tortuosity dimension, vug fractal dimension, Young’s modulus and Poisson’s ratio.

Speaker: Hao Wang (中国石油大学（华东）)

09:55 Study on the Influence of Supercritical Carbon Dioxide Adsorption on the Phase Behavior of Shale Gas Condensate Reservoirs

Extensive research has been conducted on the thermodynamic phase behavior at the nanoscale. However, there is limited investigation on the nanoconfinement effect on the phase behavior of hydrocarbons considering the shale expansion induced by the interaction between supercritical carbon dioxide and shale.

In this study, a theoretical model has been developed to describe the expansion of shale caused by the adsorption of supercritical carbon dioxide, resulting in a reduction in the surface potential energy. The developed model assumes that the surface potential energy change caused by the adsorption is equal to the change in elastic energy of the shale matrix, which is based on energy balance approach. Subsequently, a modified Peng-Robinson equation of state model was extended to investigate the effect of the shale expansion on the phase behavior of hydrocarbons.

The results indicate that the effects of supercritical carbon dioxide -shale interaction on the phase behavior of nanoconfined hydrocarbons are not only dependent on the pore radius but also on the pressure and the adsorption capacity of supercritical carbon dioxide. When the pore radius is greater than 50nm, the impact of shale expansion induced by the adsorption of supercritical carbon dioxide on the nanoconfinement effect is limited. Nevertheless, the nanoconfinement effect becomes prominent within 50nm for pore radius, and it strengthens with increasing pressure and carbon dioxide saturation in shale. The calculated results shows that minimum miscibility pressure (MMP) in 10nm pores is 6.7% lower than the MMP for bulk phase.

This study will shed valuable insights into the phase behavior of fluids in nanopores and the carbon dioxide storage in deep shale.

Keywords: Supercritical carbon dioxide, Shale, Nanoconfinement, Phase behavior, Peng-Robinson equation of state

Speaker: Fei Peng (China University of Petroleum (Beijing))

09:55 The occurrence states of shale oil and its controlling factors in Yanchang Formation, Ordos Basin, China

Oil mobility evaluation is the primary topic in shale oil development. The different occurrence states of shale oil, which closely relate to the pore structure and fluid properties tremendously affect the oil mobility in shale. As proved in previous studies, the higher the content of oil in free states, the better the oil mobility will be. In this study, the oil occurrence states and its influencing factors of the 7th member in Yanchang Formation (Chang7) in Ordos Basin, China were investigated by multiple experiments, including nuclear magnetic resonance (NMR), nitrogen gas adsorption (NGA), electronic scanning microscope (SEM), X-ray diffraction, and rock pyrolysis. The Chang7 samples were classified into four lithofacies based on mineralogy and TOC. With the increasing of the clay content, the four lithofacies are siliceous shale, OM-rich siliceous shale (TOC>5%), argillaceous shale, and OM-rich argillaceous shale (TOC>5%) (Figure 1). The NMR results indicate the fluids in Chang7 consist of structure water, free water, adsorbed oil, and free oil. The contents of adsorbed oil increase with TOC and clay percentages increase. However, the contents of free oil show negative relationships with TOC and clay percentages. Therefore, we speculate that the strong adsorbability in organic matter and clay minerals force the oil to be preserved as adsorbed oil in shale, which tremendously affect the oil occurrence states and mobility. Siliceous shale has the greatest content of free oil, and OM-rich siliceous shale has the greatest content of adsorbed oil. From the NGA results, mesopores have the domination in pore volume and specific surface area, especially in siliceous shale. The cumulative pore volumes decrease from siliceous shale to OM-rich argillaceous shale with the increase of clay contents. The NGA was also conducted on the samples after solvent extraction, which shows opposite changes of the volume in mesopores and macropores. Lots of mesopores were released by solvent extraction, particularly in siliceous shale which has the greatest increase in mesopores. Similarly, SEM images of the siliceous shale also show a large amount of mesopores in felsic grains. In the other three lithofacies, few pores were observed because of the tight compaction of clay and felsic minerals. Combing with the free oil content, the positive relationship between the free oil content and different percentage of mesopore volume indicates that the mesopores are the primary storage space of free oil (Figure 2). Compared with the lithofacies which have more clay content and TOC, the siliceous shale has more mesopores and low adsorbability in the pore system, which provides an optimum pore structure for the occurrence of free oil. To summarize, the free oil content shows an obvious preference in siliceous shale. The lithofacies defined by mineralogy compositions and TOC affect the oil occurrence states by pore structure. Parallelly, the pore structure was deeply affected by the grain size, spacial arrangement, and minerals (grain type). Therefore, the occurrence states of oil in shale were strongly affected by the pore structure through the lithofacies.

Speaker: Chen Zhao (China University of Petroleum (East China))

09:55 Theoretical Foundation for Klinkenberg-corrected Permeability of Microporous Media in Pulse Decay Method

We provide the theoretical foundation of directly adopting the Klinkenberg plot, the apparent permeabilities versus the reciprocal of the mean pressures, in Pulse Decay Method to eliminate the slippage effect, which is characterized by the Knudsen number and strengthens with the decrease of permeability, by asymptotic perturbation of Navier-Stokes equation in capillaric model in this work. Traditional late-time solution of Pulse Decay Method intrinsically cannot take the slippage effect into account, except for some tedious numerical attempts. We theoretically fill the gap of interpreting the experimental data got by the traditional late-time solution of Pulse Decay Method with consideration of the slippage effect. By considering the nature of the low value of permeability, asymptotic perturbation method is adopted to theoretically solve the governing equation. We show that the Klinkenberg plot can be safely used to interpret the experimental data of Pulse Decay Method for microporous media when the ratio between the pore volume of the microporous media and the upstream or downstream chamber is smaller than 0.1. This implies that when one chamber, upstream or downstream chamber, is totally sealed in experiment, the slippage effect cannot be eliminated for this kind of experimental apparatus. Our own experimental results, by comparing the intrinsic permeabilities got by Pulse Decay Method and steady-state method in different mean pressures for the same sample, verify the correctness of our derivation.

Speaker: Tian Zhiguo

09:55 Transport properties evaluation of pore-scale GDLs for PEMFC using orthogonal design method

Gas diffusion layer (GDL) is an essential component of proton exchange membrane fuel cells, serving the functions of gas-water transport, thermal-electrical conduction and mechanical support. The various microstructural characteristics of the GDL have coupled and complex impact on transport properties, which is not comprehensively considered in previous studies. This study combines stochastically reconstruction techniques, pore-scale modeling and orthogonal design method to evaluate the coupling effect of multiple microstructural characteristics on transport properties, and determine the impact degree of each microstructural characteristics, including fiber diameter, porosity, GDL thickness, fiber orientation coefficient, binder and PTFE content. Finally, new mathematical models are developed and validated to predict and optimize the anisotropic transport properties accurately and rapidly by considering the coupling effect of multiple microstructural characteristics. The results showed that porosity has higher impact degree on gas diffusion and heat conduction than other microstructural characteristics. The combinations of microstructural parameters are optimized to achieve higher performance, with thermal conductivity and gas diffusivity increased by ≥139% and 62%, respectively. The prediction mathematical models are validated with the error ranging from 1% to 8%, which can predict transport properties and optimize the GDL microstructure accurately and rapidly.

Speaker: Miaoqi Bian (Ningbo University)

09:55 Understand Advection-Dispersion and their Relationship with the Scales of Heterogeneity through Lattice Boltzmann simulations

The classical advection-dispersion equation has been a cornerstone in aquifer solute migration studies for decades. However, prevailing misunderstandings regarding advection-dispersion dynamics, their interplay with heterogeneity scales, the nature of ensemble averages, and their observational implications have sparked intense debate concerning the equation’s conceptual validity. Addressing these controversies is critical for demystifying phenomena such as macrodispersion, anomalous dispersion, and scale-dependent transport, as well as for evaluating contemporary models like the dual-domain dispersion model for solute movement in aquifers. This investigation employs the Lattice Boltzmann Method (LBM) for simulating solute transport within heterogeneous porous media. Our study delineates the evolution of the dispersion concept from molecular diffusion to encompass fluid dynamic effects caused by variations in scale-specific velocities and discusses the limitations of extending Fick's law for molecular-scale velocity variations to describe the effects of large-scale velocity variations.

Speaker: Yanhui Dong

09:55 Unveiling Microbial Activity in Rock Pores: Tailored Sample Preparation and SEM-EDS Insights

Studying the interactions among microbes within rock pores and their impact on mineral phases is essential for comprehending subsurface ecosystems and biogeochemical processes, particularly in the realm of subsurface energy operations. In this paper, we introduce an approach that merges customized sample preparation methods with traditional Scanning Electron Microscopy (SEM) featuring Energy-Dispersive X-ray Spectroscopy (EDS) to both visualize microbes in rock pores and analyze the alterations in mineral phases induced by microbial activity.
Customizing the sample preparation process is crucial to preserving the delicate microbial structures within rock pores. We have devised a protocol that incorporates gentle fixation, embedding, and broad-ion-beam (BIB) polishing to preserve the in-situ arrangement of microbes while facilitating optimal SEM-EDS analysis. This method minimizes sample artifacts, enhancing the accurate representation of microbial structures. Through careful selection of imaging parameters and leveraging SEM imaging, we successfully visualized microbes in their natural habitat, allowing us to observe patterns of microbial colonization, biofilm formation, and interactions with mineral surfaces.
The addition of EDS analysis complements SEM imaging by furnishing elemental composition data at micro- to nanoscale resolutions. Mapping mineral phases and identifying elemental changes induced by microbial activity provided valuable insights into biomineralization processes, dissolution, and precipitation events. Such information is crucial for understanding how microbial communities influence the mineralogical composition of rocks. Our findings highlight the diverse microbial communities residing in rock pores and their intricate impact on mineral phases. Distinct patterns of mineral alteration, including the formation of biominerals and the dissolution of specific phases, were observed. The integration of tailored sample preparation techniques with conventional SEM-EDS emerges as a straightforward yet potent tool for investigating microbial interactions in rock pores.

Speaker: Mr Mingze Jiang (MaP - Microstructure and Pores GmbH)

09:55 Volatile Transport in Porous Lunar Regolith: Diffusion at Infinite Knudsen Number

The lunar surface is covered with a layer of lunar regolith. Observational evidence[1-3] suggests that it may contain volatile substances such as water, methane, and helium-3 that could be utilized. Studying the diffusion behavior of volatiles in lunar regolith is of great significance for the exploration and exploitation of these extraterrestrial resources.

Volatile in lunar regolith layer exist under extremely high vacuum conditions (~$10^{-9}Pa$)[4]. Under such extreme conditions, gas molecules undergo Knudsen diffusion, where the average free path is more than 10 orders of magnitude larger than the size of lunar regolith particles (Knudsen number $Kn > 10^{10}$). At this extreme (almost infinitely large) Knudsen number condition, gas molecules in porous lunar regolith rarely collide with each other, and the diffusion trajectories resemble chords (free paths) between solid surfaces which are determined solely by porous structure. Previous studies have measured tortuosity[5] or free path length distribution[6] to modify the diffusion coefficient, but the correlation between pore structure and the diffusion coefficient is still largely unexplored.

In this study, we investigate the influence of pore structure on the diffusion of rarefied gases in porous media at infinitely large Knudsen number, based on a Monte Carlo program. Numerical experiments confirm that the linear relationship between the mean square displacement and time predicted by the Einstein equation still holds. However, the statistics of free path lengths shows clear bimodal-distribution even in homogeneous media, which is different from the unimodal-distribution as shown in porous media Fickian diffusion or in straight tube Knudsen diffusion. By statistically analyzing the molecular trajectories within the porous medium, we show that the bimodal distribution corresponds to the sizes of pore and the throat.

According to the pore-throat bimodal distribution of free path length, we establish a bimodal random walk model to derive the diffusion coefficient from the pore and throat parameters. This analytical prediction successfully matches the numerical experiments with various structures. We further investigate the impact of adsorption and heterogeneity on the volatile transport in porous media at infinitely-high Knudsen number.

Speaker: sunpeng zhou (College of Engineering, Peking University)

11:25 → 12:25 MS04: 1.1

11:25 Quantifying the Soil Swelling Potential by Soil Water Isotherm

Swelling potential has long been used as a terminology to quantitatively describe the expansibility of soil. It encompasses multiple definitions such as the swelling pressure under specific strain constraints or the free swelling strain without confining stress. However, although these definitions are of great significance to engineering practice, they do not directly represent the physical nature of soil expansion. Resistance to mineral swelling occurs due to Van der Waals and Coulomb forces between crystal layers. The water adsorption ability within the interlayer space of expansive minerals can overcome this resistance by enabling water molecules to enter the interlayer space, resulting in macroscopic soil expansion. The interlayer hydration of expansive minerals serves as the intrinsic reason for soil swelling. Therefore, the authors propose utilizing the energy available for swelling of the interlayer space under a specific humidity as the soil swelling potential. To experimentally determine the proposed swelling potential, a framework based on the soil water isotherm (SWI), which establishes the constitutive relation between relative humidity and water content, was developed. SWI not only represents the energy state of soil water but also captures the interlayer water content change of expansive soil during wetting and drying through its hysteresis at low humidity. By leveraging the existing SWI model, which determines interlayer water content, and the method of calculating the water adsorption ability of soil (referred to as soil sorptive potential, SSP) using SWI, the authors can quantify the proposed soil swelling potential under any humidity. Several verifications were conducted to validate the proposed swelling potential. Firstly, the SWI of montmorillonite was generated using molecular simulation, combined with basal spacing measurements obtained from XRD tests under varying humidity. The interlayer water content and system energy change from the molecular simulation were analyzed to understand the volume change of mineral during wetting and drying. The energy change of soil-water system under humidity variations was used to verify the theoretical soundness of the established swelling potential framework. Secondly, the measured SWIs of different soil samples were utilized to calculate the swelling potential of these soils, thereby confirming the practical feasibility of the proposed framework. Finally, to facilitate comparison with existing indicators for identifying expansive soils, the energy used for crystal layer expansion during the water adsorption process, which can also be calculated using the proposed framework, was defined as the swelling potential index. This index exhibited superior performance in identifying expansive soils compared to other indicators of soil swelling ability. This study offers a novel perspective on the study of expansive soils and establishes a scientific basis for understanding the engineering behaviors of expansive soil under varying humidity environments.

Speaker: Yijie Wang (The Hong Kong Polytechnic University)

11:40 Pore-scale network modelling of CO2–shale interaction with swelling effect

Underground CO2 storage is a crucial effort to reach net-zero carbon emissions by 2050. By this, a large volume of gaseous CO2 is stored underground. Shale formations due to their proper storage capacity—composed of both bulk and adsorption types—can host CO2 for geo-sequestrations. Shale is also a common lithology of cap rocks over underground storage sites, which has the duty of sealing the storage site impeding upward migration of injected CO2. To understand dynamic behaviour of CO2 storage in shales, pore-scale insights are required to investigate physiochemical interactions between injected CO2 and host shale rock. Shale swelling defined as shale matrix deformation due to CO2 adsorption leading to fracture size change is to be studied in this research. In this study, we take an image-based approach to extract unstructured triple-porosity pore-network models (PNMs) based on volumetric synthetic images. At nanoscale, meso- and micro-pores of shale matrix together with fractures compose a network of pores for each shale sample. Various flow features of shale including gas rarefaction, sorption, and surface diffusion are included. It should be noted that this PNM benefits from considering gas sorption effect at pore-level, which is less included in previous shale PNM studies.

By considering methane (CH4) as the host fluid within the pore network and considering injection of carbon dioxide (CO2) into shale samples, effect of swelling is studied. Such that, matrix deformation due to gas sorption imposes a size-reducing effect on fractures. This swelling effect is in competition with mechanical effective stress effect by which fractures are prone to size change as well. Thus, this study computes dynamic pore-scale fracture size change during the injection of CO2 into initially CH4-bearing shale samples. The results give insights into the fracture permeability change in two sets of low-density and high-density fractured shale samples. The results show how Darcy and Knudsen permeability values change over different CO2 injection pressures for both low-density and high-density fractured samples.

Speaker: Mr Amin Taghavinejad (James Watt School of Engineering, University of Glasgow, Glasgow, United Kingdom)

11:55 Impact of Sand-Hydrogel Mixtures Swelling on Shearing Behaviour: An X-ray CT Study

Hydrogels also known as superabsorbent polymers (SAPs) are crosslinked hydrophilic polymers characterized by a three-dimensional polymer network structure. These polymers are capable of absorbing water to thousands of times their own weight. Hydrogels can either be synthetic (polyacrylic acid) or natural such as biopolymers (xanthan gum). The use of hydrogels has been found to have increased utilization in diverse fields such as agriculture, environmental science, petroleum, and civil engineering. The key attractions in the use of hydrogels in these fields include the ability to absorb substantial amounts of water, selectively attracting and binding to pollutants and facilitating particle aggregation. Most previous studies have consistently demonstrated that during wetting swelling of hydrogel leads to restructuring of the soil particles and these studies claim that results of wetting affect the soil stiffness, increases erodibility, and reduces shear strength. However, we lack a more comprehensive understanding of the complex micromechanical processes that govern the behaviour of hydrogel-treated soils during wetting. This knowledge gap hinders our understanding of the interaction of hydrogels with soil and the effective use of hydrogels in soil remediation and geotechnical engineering applications. This study aims to unravel the swelling process of hydrogel in soil, how it leads to restructuring of soil particles and the resulting impact on the mechanical behaviour of hydrogel-treated soils. We employ a miniature triaxial cell connected to a humidifier and a peristaltic pump to supply humid air during saturation of the sand-hydrogel mixture. We utilize an X-ray Computed Tomography (CT) scanner to unveil the four-dimensional (3D + time) perspective of swelling-induced disturbance and its impact on the shearing behaviour. Preliminary results show that hydrogel swelling dramatically reduce sand-to-sand contacts, resulting in a much smaller peak strength. We further adopt image processing algorithms to denoise, segment phases (sand, hydrogel, and air), and label sand and hydrogel particles for performing quantitative analysis such as displacement and strain fields.

KEY WORDS: Hydrogels; Swelling; Shearing behaviour; Soil restructuring; X-ray tomography.

Speaker: Mr Mhlengi Masango (University College Dublin)

11:25 → 12:25 MS05: 1.1

11:25 Microcalorimetric Evaluation of Microbial Activity and Reaction Rate in Sand-packed Porous Media During Microbial-Induced Carbonate Precipitation For CO2 Leakage Remediation

Carbon capture and storage (CCS) is a key technology to reach long-term climate goals that limit the temperature rise to 1.5 ◦C above pre-industrial levels. It consists in capturing CO2 from large industrial
points and geological storage in underground formations, such as depleted oil and gas reservoirs, unminable coal beds, and deep saline aquifers [1]. The success of this technique depends on avoiding
CO2 leakage to the surface through the complex subsurface geometric structures such as faults, fractures, and abandoned wells. Microbial induced calcite precipitation (MICP) is considered as a promising
in-situ method for sealing subsurface leakage paths. This technique utilizes microbes to induce calcium carbonate precipitation, which effectively reduces the porosity and permeability of the porous media,
thereby mitigating CO2 leakage risks [2].

Complex bio-geochemical interactions considering rock-microbes-reactant solution are needed to get a broad assessment of MICP efficiency in geological porous media. However, this is not an easy task
due to the complexity of the microbial activity and rock-forming minerals. In this study, we aim to understand the impact of particle size, specific surface area and pore volume on microbial activity and
geochemical rates during MICP. An extremely sensitive microcalorimetry technique called Isothermal titration calorimetry (ITC) is used to assess the microbial activities and reaction rates within various
water-saturated reservoir rocks inoculated with bacterial solutions [3]. In the ITC experiments, 100 mg of sandstone particles with different size was placed in a reaction vessel and 200μL of bacterial solution (sporosarcina pasteurii stains) was added to the rock particles [4]. The titration ampule containing the rock-bacterial solution was lowered stepwise into the calorimeter and equilibrated for 1 hour at 35 ◦C.
Seven injections of 9.948 μL of the reactant solution (calcium chloride solution) were titrated with a time interval of 420 seconds into the slurry to determine the bio-geochemical reactions by monitoring heat
changes. A quasi-2D sandpack (Fluidflower) was used to identify CO2 flow patterns after MICP treatment [5].

This work shows that the bio-geochemical interactions are exothermic (thermodynamically favorable) and therefore proceed spontaneously. The reaction activity within sandstone is 10 to 18 times higher than in corresponding bulk solutions. This observation underscores the significance of available surface area in influencing both microbial colonization and the speed at which reactions occur in the MICP process.

Speaker: Jacquelin Cobos (University of Bergen)

11:40 Predicting the tensile strength of sands treated via microbially induced carbonate precipitation (MICP)

Microbially Induced Carbonate Precipitation MICP has been studied over the years as a promising bio-mediated alternative to enhance the mechanical performance of porous media. Multiple studies have investigated different MICP treatment techniques and their application to coarse-grained soils. Results of these works show the evolution of transmission properties (e.g., ultrasound waves and permeability) and the increase in strength measured by direct shear, Uniaxial Compressive Strength UCS, tensile and triaxial testing, among others. These analyses have enriched our understanding of the capabilities of MICP, yet there remains a lack of predictability regarding the soil strength that can be achieved with MICP treatments.

This study uses an extensive dataset of triaxial results collected from the literature alongside new experimental data to propose a model that predicts the evolution of the tensile strengths in MICP-treated sands based on the calcium carbonate content achieved and the untreated soil index properties. In this study, we first analysed the influence of multiple soil characteristics on the final mechanical strength of MICP-treated sands using data from the literature. These preliminary analyses uncovered a gap in the data on the treatment of angular sands. To fill this gap, we conducted experiments using highly angular sand in which the MICP treatment strategy was varied to obtain multiple levels of cementation. After the MICP treatments were completed, the specimens were scanned via X-ray computed tomography before and after consolidated-drained triaxial tests, giving insight into the deformation behaviour during failure. The whole dataset was then used to assess the validity of an analytical model that builds on previous analyses to predict the tensile strength of MICP-treated sands. Our model results are remarkably consistent with all published datasets. Our research provides a robust framework for predicting the mechanical enhancement of MICP-treated sands, based on the mass of calcite precipitated and the untreated soil index properties. This is a critical step towards a more reliable use of bio-mediated soil enhancement techniques.

Speaker: Gloria Castro (University of Strathclyde)

11:55 Pore-scale hydrodynamics influence the spatial evolution of preferential flow paths in porous media bioclogging system

Biofilm is a universal form of microbial existence, which is formed by microbial cells and their extracellular polymers bonded to each other. It’s ubiquitous in rivers, human organs and drinking water distribution systems, where microorganisms attach to the surface of particles and cause bioclogging, which often results in negative impacts. In this paper, we developed a visualization experimental system, to realize the real-time dynamic and multi-scale observation of microbial growth under different pore structure, flow rate and nutrient concentration conditions. Visualization experimental results show that microbial growth was spatially obviously non-homogeneous due to the randomness of microbial attachment sites and preferential seepage of nutrients. In the early stage of the experiment, microorganisms mainly existed in the form of suspended cells, clusters and streams, and with the growth of microorganisms, clusters gradually coalesced to form individual biofilm clusters connecting the inlet to the outlet. In the late stage of the experiment, the biofilm formed a relatively fixed structure, and the nutrient solution mainly flowed along the preferential flow paths. Under constant flow conditions, the microbial growth led to the narrowing of the preferential flow paths, and the shear stress of the fluid would cause the preferential flow paths to become wider, the competition between microbial growth and fluid shear leads to the intermittent opening and closing of the preferential flow paths.

Speaker: Ms Rui Peng (Wuhan University)

12:10 Exploiting induced carbonate precipitation to improve reservoir storage integrity and geothermal system efficiency

Biomineralization, through microbially, thermally, or enzyme induced carbonate precipitation (MICP/TICP/EICP), is a cost-effective cementation process for changing porosity and permeability in the subsurface. This study aims to optimize compositional and injection parameters for biomineralization fluids, and to develop understanding of the interactions between geochemical reactions and fluid transport properties at the pore (micron) scale. Utilizing real-time in situ X-ray computed tomography (XCT), we compare traditional Microbially Induced Calcium Carbonate Precipitation (MICP) with novel thermally delayed (TICP) and Enzyme Induced Calcium Carbonate Precipitation (EICP) in a range of lithologies. This allows us to investigate the impact of mineralogy, grain size distribution, and temperature as well as the injection composition and strategy. We present quantitative analysis of crystal locations, the volume of carbonate and of individual crystals, and the effect of crystals on permeability and flow localisation over time. Coupled to measured changes in microstructural and macroscopic properties over repeated precipitation and dissolution cycles we present refined models of reactive transport for different injection strategies, and identify the optimal treatment strategy for different subsurface applications. This includes validation of the durability of precipitated calcite during dissolution phase simulating the behaviour of CO2-enriched brines.

This work provides the underpinning understanding principles of crystal formation, growth and hydrodynamic feedback mechanisms necessary for accurate modelling of reservoir scale dynamic processes. However we also show how TICP and EICP strategies can improve performance of real-world Carbon Capture and Storage systems, driving more homogeneous, widely distributed and larger volumes of precipitated CaCO3 by maintaining permeability during treatment at higher degrees of cementation when compared to MICP. We also show how variable injection strategies allow improvement of other physical properties (e.g. mechanical strength) and enables the addition of highly conductive additives or phase change materials without reducing precipitation and flow. Using CaCO3 precipitation we observed a 470% increase in the thermal conductivity of unsaturated quartz sand after 9 cycles of MICP, and an 800% increase following addition of 5 wt% expanded natural graphite (ENG). Our findings also demonstrate the compatibility of integrating paraffin as a phase-change material within the porous structure of ENG prior to MICP/EICP treatment significantly increasing specific heat capacity. These new geomaterials have widespread implications for thermal energy storage, specialized geothermal grouts/backfill, shallower wells and reduced geothermal energy costs.

The project's outcomes impact the commercialization of engineered biomineralization and its role in the subsurface energy transition.

Speaker: Philip Salter (University of Strathclyde)

11:25 → 12:25 MS06-B: 1.1

11:25 Numerical modeling of the phase separation process driven by a porous membrane

The separation of liquid and gas phases using porous media has been considered for various applications such as propellent management in aerospace, petroleum engineering, carbon storage and so on. However, such a process is usually difficult to model as the multiphase flow involving porous media usually spans several characteristic lengths, and the interface conditions between the free fluid and the porous media flow are relatively complex. A direct numerical simulation (DNS) using fully resolved Navier-Stokes equations is limited by the immense computational cost. In this work, a mixed-dimensional flow model was developed for the highly coupled free fluid and thin porous media flow, in which the flow process in the porous membrane was reduced to one dimension. Besides, the parameter transfer equations at the regional interface were evaluated, and the proposed model was validated against DNS results. The effects of pore structures, porosity, and flow direction on the two-phase transport process were studied in detail. The present study will provide guidance for the optimization of phase separation systems driven by thin porous media.

Keywords: phase separation, multiphase flow, numerical modeling, coupled flow, porous media

Acknowledgements
This work is supported by the National Natural Science Foundation of China (Grant No. 52276013)

Speaker: Mengyi Jiang (Shanghai Jiao Tong University)

11:55 The mathematical model and analysis of the nanoparticle-stabilized foam displacement

This work proposes a mathematical model to study the foam displacement in porous media stabilized by nanoparticles [1]. We consider a simplification of the Stochastic Bubble Population balance model in local equilibrium, with nanoparticle dependence inspired by the experimental data from the literature. It consists of a non-strictly hyperbolic system of conservation laws, which is solved for the generic initial and injection conditions. We investigate the existence of a global solution as a sequence of waves following the Conservation Laws Theory and the procedure proposed in [2], where a similar problem was solved for a two-phase flow containing an active tracer (with linear adsorption). When the solution is composed of two or more waves, we present necessary and sufficient conditions to guarantee the compatibility of these wave sequences. The analytical solution for the nanoparticle-stabilized foam displacement in porous media allowed us to quantify the effect of nanoparticles on foam displacement, focusing on the breakthrough time and cumulative water production. In agreement with the literature, when only gas is injected, the breakthrough time and the water production increase with the nanoparticle concentration. Although, we also observe that the effect of nanoparticles is less pronounced for high nanoparticle concentration. Counterintuitively, adding nanoparticles changes the mathematical solution qualitatively, yielding a negligible effect on water production during gas-water co-injection for a certain parameter range. We discuss the most favorable conditions to observe the action of nanoparticles in laboratory experiments.

Speaker: Tatiana Danelon de Assis

12:10 The Impact of System Softness on Haines Jumps in Porous Media

Haines jump is an interfacial instability characterized by fluid redistribution and sudden pressure changes. It is a pore-scale phenomenon that occurs during displacement front movement and is widespread in multiphase flow processes in porous media. It is an essential physical process that affects fluid distribution, flow regimes, and displacement efficiency. Previous studies have shown that Haines jump is an instability phenomenon taking place in a soft system comprised of entrapped gas bubbles, deformable porous media, and interacting menisci. This study aims to further investigate the impact of system softness on Haines jumps in porous media.
We conduct fluid displacement experiments in polydimethylsiloxane (PDMS) microfluidic chips and analyze the pressure signature and flow phenomena during Haine jumps. A syringe pump (Chemyx Fusion 200) maintains a constant injection rate, and a microscope (ZEISS) records the displacement process. A microfluidic pressure sensor (Fluigent) placed at the inlet measures the pressure change. The system softness is controlled by adjusting the volume of an air bubble entrapped near the inlet. The PDMS microfluidic chip is fabricated using the standard soft lithography technique. De-ionized water and ethanol are used as wetting fluids, and air is the nonwetting fluid. The impact of system softness is investigated in three conditions: single pore throat, pores in series, and pore network.
Results show that system softness affects the position where Haines jumps occur at the pore throat and the distance of the interface jump. The interface jumps a longer distance when the entrapped air bubble volume increases. It also takes a longer time for the interface to reach the unstable point. An analytical model is proposed to explain the pressure change and interfacial jump at the pore throat and matches well with the experimental observation. In cases of pores in series, the pressure signature shows a “saw” shape where sudden pressure changes and interface jumps occur at pore throats. However, the interface can jump across more than one pore as the system softness increases. As the system softness affects the magnitude of Haines jumps, it also influences the snap-offs, entrapped fluid saturation, and displacement efficiency in pore networks.
In summary, the influence of system softness on Haines jumps and its impact on fluid displacement are analyzed in detail in both single pores and pore networks. Our experiments provide insights into the pore-scale physics of Haines jumps and the impact of Haines jumps on multiphase flow in porous media.
Keywords: Haines jump, porous media, microfluidics, instability, multiphase flow, interface

Speaker: Zhonghao Sun (Xi'an Jiaotong University)

11:25 → 12:25 MS07: 1.1

11:25 Simulation of density-driven flow in heterogenous and fractured porous media

The study of fractured porous media is an important and challenging problem in hydrogeology. One of the difficulties is that mathematical models have to account for heterogeneity introduced by fractures in hydrogeological media. Heterogeneity may strongly influence the physical processes taking place in these media. Moreover, the thickness of the fractures, which is usually negligible in comparison with the size of the whole domain, and the complicated geometry of fracture networks reduce essentially the efficiency of numerical methods. In order to overcome these difficulties, fractures are sometimes considered as objects of reduced dimensionality (surfaces in three dimensions), and the field equations are averaged along the fracture width.
Fractures are assumed to be thin regions of space filled with a porous material whose properties differ from those of the porous medium enclosing them. The interfaces separating the fractures from the embedding medium are assumed to be ideal. We consider two approaches: 

(i) the fractures have the same dimension, d, as the embedding medium i.e. they are d-dimensional; 

(ii) the fractures are considered as (d-1)-dimensional manifolds, and the equations of density-driven flow are found by averaging the d-dimensional laws over the fracture width.
We show that the second approach is a valid alternative to the first one. For this purpose, we perform numerical experiments using a finite-volume discretization for both approaches. The results obtained by the two methods are in good agreement with each other.
We derive a criterion for the validity of the simplified representation. The criterion characterises the transition of a mainly parallel flow to a rotational flow, which can not be reasonably approximated using a d-1 dimensional representation. We further present a numerical algorithm using adaptive dimensional representation.

Speaker: Gabriel Wittum (G-CSC, Goethe-Universität Frankfurt)

11:40 Multilevel Monte Carlo Method for Simulation of Propagation of Uncertainties in Fractured Porous Media

Simulation of salinization of coastal aquifers plays an important role in prediction of availability of pure water resources. In these geological formations, fractures introduce strong heterogeneities and their influence on the groundwater flow and the transport of the salt is significantly (cf. [1]). However uncertain variations in hydrogeological parameters such as porosity, permeability, fracture aperture etc. may essentially reduce accuracy of the prediction of the transport phenomena. In this talk, we present an application of the multilevel Monte Carlo method for estimation of propagation of the uncertainty from the parameters of the fractured porous medium to the solution in the subsurface density-driven flow model represented by a system of non-linear PDEs. This research is a continuation of our recent work on the uncertainty quantification for this type of models (cf. e.g. [2]). We test this approach on a model problem with the random porosity field, recharge and fracture aperture that represent the limited knowledge of the data. Parallelization is applied to the Monte Carlo method. We present results of numerical experiments on the supercomputer Shaheen II.

Speaker: Dr Dmitry Logashenko (King Abdullah University of Science and Technology)

11:55 A Hybrid-Dimensional Stokes--Brinkman--Darcy Model: Derivation, Analysis and Validation

Coupled free-flow and porous-medium systems have received rising attention in recent years due to their broad applications in the environment, biology, and industry. A suitable coupling concept should be applied to characterize fluid behavior between the free flow and porous medium. However, the majority of coupling conditions are restricted to flows parallel to the fluid-porous interface.

In this talk, we present a hybrid-dimensional model for coupled free-flow and porous-medium systems which is suitable for arbitrary flow directions. We consider a narrow transition region between these two flow systems that stores and transports mass, momentum, and energy. The proposed hybrid-dimensional model incorporates the Stokes equations in the free flow, the averaged Brinkman equations along the transition region, and Darcy's law in the porous medium. Appropriate transmission conditions are considered between the three regions. The well-posedness of the developed hybrid-dimensional model is proven. The model is validated against the pore-scale resolved simulations and compared with other coupling concepts. Numerical simulation results demonstrate the advantages of the proposed model in comparison to the coupling concepts available in the literature.

Speaker: Linheng Ruan (Institute of Applied Analysis and Numerical Simulation, University of Stuttgart)

11:25 → 12:25 MS08: 1.1

11:25 Dispersion and Straining Behaviors of Non-Spherical Suspended Particles in Saturated Randomly Packed Beads: A Numerical and Theoretical Study

Understanding the transport of particles in porous media, including dispersion and straining, plays a pivotal role in optimizing various engineering processes, such as drug delivery, wastewater treatment, and fracking proppants displacement. While prior numerical endeavors have significantly expanded our understanding of the microscopic behavior of particles within porous media, they have frequently overlooked the shape anisotropy of particles. When particles are non-spherical, such as pills, bacteria, and microplastics, the shape anisotropy of particles may determine their dispersion and straining behaviors in porous media, even in weakly heterogeneous environments like beadpacks.

To bridge this knowledge gap and evaluate our hypothesis, we simulated the Lagrangian transport of 3-D non-spherical particles through a 3-D porous network generated by a randomly sedimented, saturated bead pack, employing a computational fluid dynamics-discrete element method (CFD-DEM) approach. To account for the particles’ asphericity as well as its impact on particle transport, we modeled the particles as superquadrics of varying asphericities and implemented a particle-fluid two-way coupling algorithm, where the fluid flow influences particles’ motion, and conversely, particles also affect the fluid streamlines.

Our results suggest that, compared to spherical particles, highly aspherical particles tend to migrate along streamlines more readily, resulting in a higher mean dispersivity; such particles also tend to sweep a larger volume of the pore space, leading to a more uniform spatial distribution of retained particles. To support our numerical observations, we report a particle velocity probability distribution function that encompasses the impact of particles’ asphericity on their dispersion and straining behaviors. Said function compiles all numerical observations and distinguishes between the straining and dispersion characteristics. We also deliberate on the similarities and differences between this new function and the function applicable to spherical particles, as previously reported [1]. The presented function can be useful in designing particle topology to achieve specific velocity distributions or mean dispersivity of interest.

Speaker: Mr Yaoming Chen (Southern University of Science and Technology, China University of Petroleum (East China))

11:40 Dispersion Control in Fractured Multi-Layer Porous Media System

Multi-layered porous media are present in a variety of natural and engineered systems, and their structure can have a significant impact on flow and transport processes. This study proposes a hybrid analytical-numerical solution to examine the relationship between scalar dynamics and media properties in coupled systems comprising a two-dimensional free flow layer and a heterogeneous porous medium operating under fully developed laminar flow conditions. Perturbation and homogenization methods are used to obtain a set of one-dimensional upscaled equations for passive scalar transport. These equations are then used to develop a semi-analytical solution based on integral transforms, which enables the relationship between the properties of the porous system and scalar mixing and spreading to be determined. To validate the solution for the upscaled system, we compare the results with numerical findings for two-dimensional scalar transport. In addition, we analyze the influence of the multilayered system on macroscopic transport by examining the breakthrough curve, dispersion coefficient, and mixing of the scalar cloud. The results suggest that the semi-analytical solution can be used to optimize and determine the arrangement of porous media properties to achieve desired mixing objectives.

Speaker: Bowen Ling (Stanford University)

11:55 Non-monotonic effect of compaction on dispersion coefficient of porous medium

Numerous studies have shown a non-monotonic relationship between the dispersion coefficient and the degree of compaction of porous media [1, 2]. However, the mechanism responsible for the non-monotonic variations of the dispersion coefficient remains unclear, which brings difficulties and challenges for the regulation of the dispersion coefficient of porous media.
By combining the discrete element method and the pore network model, we investigate the impact of compaction on the dispersion coefficient of the porous medium. The dispersion coefficient exhibits a non-monotonic dependence on the degree of compaction, which is distinguished by the presence of three distinct regimes in the slope of the dispersion coefficient to the pressure load. The non-monotonic variation of the dispersion coefficient is attributed to the disparate effect of compaction on dispersion mechanisms. Specifically, the porous medium becomes tightly packed with increasing pressure load, reducing the effect of molecular diffusion that primarily governs at small Péclet numbers. Simultaneously, the elevated pressure load reinforces the heterogeneity of the pore structure while reducing its connectivity, leading to enhanced disorder and elevated proportion of low-velocity regions within the porous media flow, further strengthening mechanical dispersion and hold-up dispersion, respectively, which dominate under high Péclet numbers. The competition between weakened molecular diffusion and enhanced hold-up dispersion and mechanical dispersion, together with the shift in the dominance of dispersion mechanisms across various Péclet numbers, results in multiple regimes in the slope of the dispersion coefficient to the pressure load. Our study provides unique insights into the structural design and modulation of the dispersion coefficient of porous materials.
Keywords: dispersion; compaction; non-monotonic effect.
Reference
[1] E. Charlaix, J.P. Hulin, T.J. Plona, Experimental study of tracer dispersion in sintered glass porous materials of variable compaction, Physics of Fluids 30 (6) (1987).
[2] C.T. Karin C.E. Östergren∗, Characterization of hydrodynamic dispersion in a chromatographic column under compression, Chem. Eng. J. (2000).
[3] Y. Liu, W. Gong, Y. Zhao, X. Jin, M. Wang, A Pore-Throat Segmentation Method Based on Local Hydraulic Resistance Equivalence for Pore‐Network Modeling, Water Resour. Res. 58 (12) (2022) e2022WR033142.

Speaker: Yang Liu

12:10 Probing Transport in Geologic Porous Materials by Fast X-ray Micro-Computed Tomography

Understanding the time evolution of solute transport at the pore scale in geologic porous media is crucial in many subsurface engineering applications, including underground gas (e.g. H2 and CO2) storage. While transport processes in rocks can be investigated by dynamic 4D imaging, such as X-ray and neutron-based computed tomography, most of the observations so far have been limited to the continuum scale (image resolution approx. 1 mm and above). These observations have improved our understanding of non-Fickian transport in rocks [1]. Yet, the lack of spatial resolution of these methods precludes the unambiguous interpretation of the transport mechanisms at play, because the relevant mixing processes initiate at the pore scale. Recent advances involve the uses of fast X-ray micro-computed tomography (fast µCT), which allows direct micron-scale imaging of fluid transport at a time resolution on the order of tens of seconds.

Here, we analyse a comprehensive data set of 4D imagery acquired by fast µCT available on the Digital Rocks Portal [2,3]. The dataset consists of dynamic images of solute transport during miscible displacement in three porous media (diameter: 6 mm, and lengths: 16 or 20 mm), namely sintered beadpack, Bentherimer sandstone, and Savonnières limestone. Tracer tests were performed at various Péclet numbers, covering the range Pe = 2 – 20. In each test, fast µCT scans were continuously acquired at the sample inlet with the field of view of 8.8 (H) x 8.8 (W) x 5.0 (L) mm, and at spatial and time resolutions of 14 µm and 12 s, respectively. We have analysed this rich dataset by applying the concept of residence time (RT) at different length-scales and by considering its spatial variability within the sample. Specifically, we computed RT curves for individual pore volume elements (PVE) in the sample (> 100 curves) and identified variations with both size and spatial location of the PVE. The strength of pore-scale heterogeneity is thus quantified by comparing the experimental RT with the theoretical counterparts. To quantify the degree of non-uniformity of the concentration field, we also examined the extent of mixing within individual PVE using various metrics, including the dilution index, the intensity of segregation and the spreading length.

Speaker: Takeshi Kurotori (Imperial College London)

11:25 → 12:25 MS09: 1.1

11:25 Direct pore-scale modeling of foam flow through 3D rough fractures

Foams are dispersions of gas bubbles within a liquid. They can be generated in porous and fractured media during co-injection of two fluids in the presence of surfactants that stabilize foam bubbles. Since foam viscosity is much higher than the constituent gas and liquid phases, they are used for diverting fluid to less permeable subsurface formations in applications such as enhanced oil recovery or carbon dioxide storage. Pore geometry, thermodynamic conditions, molecular structure and behavior of stabilizing agents such as surfactants or nanoparticles near fluid/fluid or fluid/solid interfaces are some important factors affecting stability and regeneration of foam in porous media.
We present the first 2D and 3D results from a direct pore-scale modeling of foam in porous media. We use free-surface lattice Boltzmann method adapted for simulation in an imaged realistic fracture geometry. All geometries are available from Digital Rocks Portal, https://www.digitalrocksportal.org/. The model couples Navier-Stokes equation for fluid flow between bubbles and diffusion of dissolved gas within liquid into bubbles, and is adapted from LBfoam (https://github.com/mehdiataei/LBfoam) open solver that originally does not account for porous medium. To our knowledge, this is the first 3D model with the foam flow driven by pressure gradient in a fractured porous medium, gas diffusion through liquid phase and the interface changes as a result of both aforementioned mechanisms at pore scale. The bubble morphological variations we observe are caused by bubble coalescence, splitting and merging and we quantify them using morphological parameters (Minkowski functionals) in different liquid viscosity, pressure gradient, surface tension and temperature conditions.

Speaker: Xuesong Ma

11:40 Numerical simulation of two-phase flows in digital core samples with underresolved porosity

Micro-CT scans are widely used for rock models in Digital Rock Physics applications. However, up to one-half of the connected porosity of carbonates and shales is underresolved with micro-CT due to the small pore size. This underresolved pore space may still support multiphase fluid flow. To simulate two-phase flows in models where both large-scale and underresolved pores are present, we developed a numerical algorithm based on the combination of the phase-field model with two-phase filtration, which supports continuous phase transport in a multi-scale pore space.
The fluid flow is simulated using the unified Navier-Stokes-Brinkman equation, which is well suited for the models where the absolute permeability is at the level of mcroDarcy, which is the case for the underresolved porosity of carbonates and shales. This equation is solved using the projection-based method. The phase transport in the resolved pores is governed by the Cahn-Hilliard equation of the phase field, which makes it simple to treat the complex geometry and topology of the pore space and the phase. Phase transport in the underresolved pores satisfies the two-phase filtration equation, accounting for the capillary pressure. The two models are coupled at the interface between the resolved and underresolved pores based on flux continuity. Additionally, the wetting-angle boundary condition is satisfied for the phase-field model.
The designed algorithm and its GPU-based implementation are used to estimate the relative permeability and capillary pressure of the samples with underresolved porosity.
The research was supported by RSCF grant no. 21-71-20003

Speaker: Vadim Lisitsa (Institute of Mathematics SB RAS)

11:55 Volume of Fluid based study of the three phase dynamic contact line in wetting of the nanometric rough micro-channels

The precise representation of molecular motion near the three-phase dynamic contact line remains a significant research challenge [1], with substantial practical implications [2]. We investigate the two-phase flow in a pressure driven micro channel (width ~ 1µm - 10µm) having a nanometric surface roughness. The two phases are separated by an interfacial layer with surface tension, that meets the moving pipe wall, hence, a three phase dynamic contact line is formed. Numerical simulations are conducted by solving the 2D two-phase Navier-Stokes equation using the Basilisk flow solver. The Volume-of-Fluid method is employed to capture the interface, and the surface tension force is computed using the Continuous Surface Force method. Additionally, curvature calculation is done using height functions. To address the influence of surface roughness, we develop a hybrid Volume-of-Fluid coupled embedded boundary solver. This hybrid solver enables the imposition of a contact angle on arbitrarily shaped solids. We explore scenarios where (a) surface roughness exhibits periodicity, (b) the surface is scratched or bumped with rough patches, and (c) surface heterogeneities are present. The study quantitatively demonstrates the emergence of stick-slip behavior in these scenarios allowing us to verify the thesis of Hocking [3] and Jansons [4]. Our findings serve as a prerequisite for full pore-scale Direct Numerical Simulation (DNS), ensuring a high-fidelity representation of dynamic wetting phenomena in porous media.

[1] Lācis U, Pellegrino M, Sundin J, et al. Nanoscale sheared droplet: volume-of-fluid, phase-field and no-slip molecular dynamics. Journal of Fluid Mechanics. 2022;940:A10. doi:10.1017/jfm.2022.219

[2] Liu C-Y, Vandre E, Carvalho MS, Kumar S. Dynamic wetting failure and hydrodynamic assist in curtain coating. Journal of Fluid Mechanics. 2016;808:290-315. doi:10.1017/jfm.2016.594

[3] Hocking LM. A moving fluid interface on a rough surface. Journal of Fluid Mechanics. 1976;76(4):801-817. doi:10.1017/S0022112076000906

[4] Jansons KM. Moving contact lines on a two-dimensional rough surface. Journal of Fluid Mechanics. 1985;154:1-28. doi:10.1017/S0022112085001392

Speaker: Dr Tianyang Han (Sorbonne University)

11:25 → 12:25 MS13: 1.1

11:25 Anomalous phase transition behavior of dilute electrolyte solutions in nanoconfinement under cryogenic environment

The impact of confined spaces on the phase transition of water or electrolyte solutions has garnered considerable interest due to their widespread occurrence in natural processes and technological applications. [1-3] Specifically, phenomena such as freezing, melting, and vapor condensation have been extensively studied. Recently, there has been growing attention towards the phase transition of aqueous solutions, as they represent situations closer to natural and realistic scenarios than pure water.[4-5]
Notably, electrolyte solutions exhibit a slight variation from pure water, wherein an ice-salt phase separation occurs at low temperatures. The phase transition starts when ice or salt precipitates and continues until the eutectic point is reached. The eutectic point, being the lowest temperature at which a liquid solution can exist, remains constant regardless of the initial molality, and decreases with decreasing pore radius.[4] Anomalous behavior in confinement arises when the initial concentration is significantly diluted. In all studies involving a dilute solution in confinement, the thermal signal of ice and salt crystallization at the eutectic point was not observed, neither in bulk nor in the pore.[3,5]
In this work, we conducted a systematic calorimeter measurement to analyze the influence of salt molality, pore filling extent, and pore size on the transition routine of CaCl2 and NaCl solution. The results indicate that in situations with fewer salts, such as smaller pores, dilute solutions, or lower filling degrees, only water freezing at the beginning is detected, and the eutectic transition is absent due to the lack of available free ions for crystallization in the pore center. Conversely, the eutectic transition could be well detected in the solution with a larger amount of salts. This may be attributed to the uneven distribution of cations and anions in pores[6]

Reference
1. T. Talreja-Muthrejia, K. Linnow, D. Enke, M. Steiger, Deliquescence of NaCl Confined in Nanoporous Silica, Langmuir, 38, 36 (2022) 10963-10974.
2. X. Wang, G. Shi, S. Liang, J. Liu, D. Li, G. Fang, R. Liu, L. Yan, H. Fang, Unexpectedly high salt accumulation inside carbon nanotubes soaked in dilute salt solutions. Physical Review Letters, 121, 22 (2018), 226102.
3. E. Jantsch, C. Weinberger, M. Tiemann, T. Koop, Phase transitions of ice in aqueous salt solutions within nanometer-sized pores. The Journal of Physical Chemistry C.123, 40 (2016) 24566-24574.
4. J. Meissner, A, Prause, G. H. Findenegg, Secondary confinement of water observed in eutectic melting of aqueous salt systems in nanopores. The Journal of Physical Chemistry Letters. 7, 10 (2016), 1816-1820.
5. M. Koniorczyk, D. Bednarska, Kinetics of water freezing from inorganic salt solution confined in mesopores. Thermochimica Acta, 682 (2019), 178434.
6. M. Argyris, D. R. Cole, A. Striolo, Ion-specific effects under confinement: the role of interfacial water, ACS Nano, 4 (2010) 2035-2042.

Speaker: Mr Shaoheng Wang (University of Hamburg)

11:40 Effect of partial saturation on acoustic properties of nano-porous media

Nanoporous materials provide high surface area per unit mass and are capable of fluids adsorption. While the measurements of overall amount of fluid adsorbed by a nanoporous sample are straightforward, probing the spatial distribution of fluids is non-trivial. For macro-porous media the effect of partial saturation on acoustic properties is described by the theory of poroelasticity.

To test applicability of poroelastic patchy saturation models to nano-porous materials, we consider ultrasonic measurements during adsorption and desorption of n-Hexane vapor on nanoporous Vycor glass (Page et al., 1995). As vapor pressure is increased from zero to the saturation pressure, the vapor is adsorbed on the pore walls, resulting in gradual increase of the liquid fraction. The reverse process occurs when pressure is decreased, but the ‘drying’ of the nanopoorus glass is heterogeneous, resulting in a very different velocity-saturation relationship.

On adsorption, we model ultrasonic properties of partially saturated glass using Continuous Random Model (CRM) of Müller and Gurevich (2005), also known as the Dynamic equivalent medium approach (DEMA). In this model, the liquid fraction is considered a random function of position, controlled by the correlation length d (“patch size’), which may itself vary with saturation.

As noted by Kobayashi and Mavko (2016), during imbibition, some significant portion of the liquid fraction should be uniform. In other words, if we consider the medium to be saturated with a binary mixture of two fluids, one of these fluids should be liquid, while the other should be a uniform mixture of liquid and vapor with liquid fraction SL0, which itself increases with the increasing overall liquid saturation SL. This is even more so for nanoporous media, where adsorption tends to produce rather uniform patterns. Our modelling shows that there is a strong coupling between the patch size and uniformly saturated fractions, which cannot be resolved with ultrasonic data only. However, this can be resolved using light scattering data (Ogawa and Nakamura, 2013). Very weak light scattering during adsorption shows that 99.3% of the increase of the saturation is uniform. Yet the saturation is not entirely uniform, as shown by the deviation of the longitudinal modulus from the unform saturation limit (as discussed in the next section).

The desorption process results in macroscopic liquid patches, and cannot be modelled with CRM. We model this process with elastic finite element methods.

Our calculations show that on adsorption the characteristic patch size is of the order of 100 pore diameters, while on desorption the patch size is comparable to the sample size. These results are supported by optical data for similar systems. Our analysis suggests that one can employ ultrasound to probe the uniformity of fluid spatial distribution in nanoporous materials.

Speaker: Boris Gurevich (Curtin University, Australia)

11:55 Slip correction theory and transient solution of the pressure oscillation method

The pressure oscillation method is a widely employed technique for measuring the permeability of time-varying and tight porous media. The previous analytical solution for permeability calculation neglects the unsteady-state condition of the slip effect, and the application of the Klinkenberg correction lacks theoretical support. Existing permeability calculations rely on the periodic part, and the utilization of the transient part needs further development. In addition, parameter regulation in experiments incurs trial-and-error costs, and the reasonable prediction of parameter setting is necessary. In this study, the analytical solution of the pressure oscillation process considering the slip boundary is derived based on the capillary model and perturbation expansion. The correspondence between the Klinkenberg correction relation and the Knudsen number is clarified, which provides a theoretical basis for applying Klinkenberg correction to the pressure oscillation method. A new data processing method is proposed for permeability calculation based on the transient solution, and the scope of application of the Klinkenberg correction for the new method is given. Experiments of the pressure oscillation method and pulse decay method are carried out to validate the theoretical model and data processing method. Through comparison of the permeability measurement results, the transient solution is consistent with the periodic solution, and the unification of the quasi-steady-state and unsteady-state methods under pressure oscillation conditions is achieved. In contrast to the pulse decay method, the pressure oscillation technique exhibits advantages in terms of measurement duration. Under conditions of higher permeability, a tenfold increase in measurement speed can be attained, while under lower permeability conditions, there is a minimum threefold improvement. Through the inverse solution process for permeability calculation, this study analyzed the main factors influencing measurements in the pressure oscillation method. The reason for the inaccuracy of porosity measurement is that porosity is extremely sensitive to the amplitude ratio and the phase difference, and the measurement error is magnified several times. The contour of the amplitude ratio response based on the dimensionless number is established to provide a reference for the selection of experimental parameters for practical engineering applications.

Speaker: Mingbao Zhang (Tsinghua University)

12:10 Nanoporosity controls on the carbon storage and mineralization potential of basalts: insights from hydrothermal alteration at Newberry Volcano

This study quantifies the pore structures and reactive flow capacity of basalt rocks, specifically a range of flow top (vesicular) and seal basalt samples from Newberry Volcano drill core (Oregon, USA). Dissolution and precipitation reactions in basalts and other mafic and ultramafic rocks (silicates rich in Mg, Ca, and Fe) are the foundation for carbon mineralization, in situ mining, and geologic hydrogen technologies due to high contents of reactive minerals (e.g., pyroxene and olivine) or critical minerals. However, despite their high reactivity, these rocks exhibit large variations in porosity and permeability. In fact, many of these rocks are nanoporous (<1um) or poorly connected, thereby challenging fluid access to critical and reactive mineral surfaces. The bulk volumes of qualifying basaltic and mafic/ultramafic rocks are vast, with the US’s Pacific Northwest alone estimated to have 10^5 Gt CO2 basalt storage/mineralization capacity, assuming pore space and reactive minerals are accessible to fluid flow. Towards addressing accessible pore space and reactive minerals surfaces, this work examines the (a) pore size distribution and connectivity and (b) accessible mineral surface area within Newberry volcano basalt samples.

The Newberry Volcano basalts provide a natural laboratory for understanding multiphase and reactive flow potential of basalt pore structures. We collected 20 basaltic sandstone/volcaniclastic rocks and basalt/basaltic andesite rocks from USGS Newberry volcano drill core. The studied samples have been subjected to varied amounts of gases (CO2, H2S) and aqueous fluids in situ. The samples display varied degrees of hydrothermal alteration, where rock properties (porosity, permeability, lithology), temperature, and fluid composition dictate the extent of alteration. We characterize the macropores (vesicles) and nanopores (clays and matrix) of samples with N2 adsorption-desorption isotherms (BET surface area), TD-NMR T2, pycnometry, thin section and SEM/EDS, and microCT. The amount of Fe2O3, MgO, and CaO ranges from 18% (volcanic siltstone)-25% (flow-top basalt), confirming the reactivity of these Newberry volcano rocks. Direct numerical pore-scale simulations are used to study fluid flow capacity in image- and process-based domains for characteristic sample pore-scale features. We find distinct differences in pore structures among lithologies: for example, the volcaniclastic siltstones are dominated by a bimodal distribution, fresh/seal samples are dominated by a unimodal distribution, and multimodal distribution is significant in all hydrothermal altered basalts. Combining these distributions with imaging and modeling supports that nanoporosity is a driver of reactive flow capacity in basalts: Primarily nanoporous samples with extremely low permeability remain relatively “fresh” (unaltered) over geologic time. In originally more porous samples, aqueous fluids have altered primary minerals (plagioclase) into clays, quartz polymorphs, and carbonates which fill the pore systems, resulting in a secondary nanoporosity system. All studied hydrothermal altered basalts have similar pore size distribution and mainly contain slit-shaped pores (per BET analysis); the signal is likely dominated by clays. Overall, the natural CO2-fluid-rock system of the Newberry Volcano can be leveraged to understand anthropogenic CO2 movement in basalts. The alteration-nanoporosity-flow capacity feedback loop summarized in this work has implications for basalt storage capacity and seal performance for the aforementioned energy transition applications, especially CO2 storage and mineralization.

Speaker: Shaina Kelly (Columbia University)

11:25 → 12:25 MS15: 1.1

11:25 Machine learning accelerated molecular simulation: Implications for oil and gas problems

In the last few decades, deep learning (DL) has afforded solutions to macroscopic problems in petroleum engineering, but mechanistic problems at the microscale have not benefited from it. Mechanism studies have been the strong demands for the emerging projects, such as the gas storage and hydrate production, and for some problems encountered in the storage process, which are common found as the chemical interaction between injected gas and mineral, and the formation of hydrate. Emerging advances in DL technology enable solving molecular dynamics (MD) with quantum accuracy. The conventional quantum chemical method is computational expensive, whereas the classical MD method cannot guarantee high accuracy because of its empirical force field parameters. With the help of the DL force field, precision at the quantum chemistry level can be achieved in MD. Moreover, the DL force field promotes the computational speed compared with first-principles calculations. In this study, the basic knowledge of the molecular force field and deep neural network (DNN) is first introduced. Then, three representative open-source packages relevant to the DL force field are introduced. As the most common components in the development of oil and gas reservoirs, water and methane are studied from the aspects of computational efficiency and Chemical reaction respectively, providing the foundation of oil and gas researches. However, in the oil and gas problems, the complex molecular topo structures and various element types set a high challenge for the DL techniques in MD. Regarding the computational efficiency, it needs improvement via GPU and parallel accelerations to compete with classical MD. Even with such difficulties, the booming of this technique in the area of petroleum engineering can be predictable.

Speaker: Dr Jie Liu (King Abdullah University of Science and Technology)

11:40 CO2 Leakage Detection using Optimized Deep Learning

1. OBJECTIVE/SCOPE
   Geologic CO2 sequestration (GCS) has been considered as a promising engineering measure to reduce global greenhouse emission. Real-time monitoring of CO2 leakage is an essential aspect of large-scale GCS deployment. This work introduces a deep-learning-based algorithm using a hybrid neural network for detecting CO2 leakage based on bottom-hole pressure measurements.

2. METHODS, PROCEDURES, PROCESS
   The hybrid neural network, called CNN-BiLSTM, leverages the strengths of convolutional neural network (CNN) and bidirectional long short-term memory (BiLSTM), in which CNN is used for spatial feature extraction and BiLSTM is applied for temporal dependency recognition. The CNN-BiLSTM enables us to build a spatial-temporal-based image-to-value regression model to learn the nonlinear mapping between high-dimensional input data (e.g., permeability, porosity, injection rate) and predicted bottom-hole pressure as output. The proposed workflow incorporates the generation of train-validation samples, the coupling process of training-validating, and the model evaluation. In this work, the diffusivity equation for pressure is solved within the CMG framework used to generate datasets under no-leakage conditions. A Bayesian optimization process is performed to optimize the network architecture, model hyperparameters, and the ratio of train to validation samples.

3. RESULTS, OBSERVATIONS, CONCLUSIONS
   We test the CNN-BiLSTM performance on the bottom-hole pressure data collected from CO2 leakage simulations. Results show that the CNN-BiLSTM model can successfully detect CO2 leakage events by comparing the difference between the predicted (no leakage) and tested bottom-hole pressures. We further compare its superiority with CNN, LSTM, BiLSTM, and CNN-LSTM. Our proposed model achieves the highest accuracy with the same datasets. The CNN-BiLSTM outperforms other models owing to 1) its capacity to process image-based input, which could accurately capture input formation, especially cases with highly heterogeneous permeability; 2) its bidirectional ability to capture time-series dependency. Other models, like LSTM and BiLSTM, take value-based input, which is insufficient to describe the input information in highly heterogeneous cases. In contrast, CNN model suffers from capturing the temporal dependency features. Because of the bidirectional feature, CNN-BiLSTM shows higher accuracy, even 10% when applied to a small number of datasets, than the CNN-LSTM model.

4. NOVEL/ADDITIVE INFORMATION
   We propose a hybrid neural network featuring Bayesian optimization for CO2 leakage detection. We demonstrate its applicability in terms of accuracy and robustness with other models. The proposed workflow can be implemented in commercial-scale GCS for real-time monitoring applications.

Speaker: Dr Xupeng He (Saudi Aramco)

11:55 Prediction of Upscaled Permeability of Digital Rock Cores Using Machine Learning Techniques

A workflow has been proposed to directly predict the upscaled absolute permeability of a rock core from CT images whose resolution is insufficient to directly calculate the pore-scale permeability. The workflow employed the deep learning technique with the raw CT image data of rocks and their corresponding permeability values, which were obtained through high-resolution flow simulation on these images.
A binarized pore-geometry model was first cropped and reconstructed from the high-resolution micro CT images of the rock sample. Then the binarized model was divided into small subsamples of dimensions $100\times100\times100$, $200\times200\times200$, and $300\times300\times300$. To meet the demand of large datasets, the subsamples are allowed to be overlapped during the extraction. The permeability of these subsamples was calculated by the lattice Boltzmann flow solver.
The calculated permeability and corresponding subsample’s low-resolution CT image pairs are then input as a dataset to train a neural network (Resnet34). Using the trained Resnet, the permeability map of an extended region in the rock core can be accurately predicted.
Finally, the Darcy flow solver calculates the upscaled absolute permeability of the entire rock core. In this study, we explore the influence of the digital rock subsample core's dimensions and the quantity of training data on the prediction accuracy and upscaled absolute permeability. Three subsample dimensions, specifically $100\times100\times100$, $200\times200\times200$, and $300\times300\times300$, were evaluated.
At a subsample dimension of $100\times100\times100$, the prediction accuracy was unstable, and good prediction accuracy was not obtained because of the presence of outliers within the subsample where only solid or only void were present. When the subsample dimension was $200\times200\times200$, the training accuracy was stable and acceptable prediction accuracy was attained when the subsample data size exceeding 20,000. Expanding the sample dimension to $300\times300\times300$, it was observed that 10,000 training data points were sufficient to achieve satisfactory prediction accuracy.
The findings of our study emphasize that the selection of an appropriate subsample dimension for training data, identified as a Representative Elementary Volume (REV) for upscaling, plays a pivotal role in optimizing the trade-off between computational time and prediction accuracy.

Speaker: Yaotian Guo

12:10 Large Scale Efficient 3D Domain Transfer for Digital Images of Porous Materials using Pseudo-3D Architectures

Characterisation of the internal 3-dimensional (3D) structure of complex porous materials has been revolutionised with deep-learned image processing and segmentation, promising second-scale scan times with hour-scale quality, and beyond-human multi-label segmentation accuracy at a fraction of the time. However, these claims are currently only true for single-sample, single-domain cases using 2D networks on 3D data, or small 3D subdomains (<$10^{8}$ voxels) on 3D networks. These limitations are fundamental to domain mismatch between trained networks and inference inputs, dimensional blindness of 2D networks on 3D data causing z-axis misalignment (the coin-stack (CS) effect), and the incompatibility between memory inefficient 3D networks and large-scale 3D data. These interconnected issues that have prevented the true application of deep learning to 3D volume data ($10^{11}$ voxels, typical of synchrotron and nano/micro-CT imaging) are resolved in this paper. Herein, we introduce an unpaired semantically consistent pseudo-3D approach to domain transfer capable of inference on domains approaching the tera-scale. Several important domain transfer applications are exhibited and validated using pixel metrics and physical parameters, including the enhancement of the time resolution from hour-scale to minute- and second-scale of static and dynamic scans of geological rocks while maintaining the hour-scale image quality, accurate segmentation of out-of-domain nano/micro-CT images using a pretrained segmentation models of lithium-ion batteries and hydrogen fuel cells, and efficient large-scale 3D inference ($10^{11}$ voxels) on single GPU.

Speaker: Kunning Tang (UNSW)

13:25 → 14:55 MS04: 1.2

13:25 Unified surface poromechanics theory capturing condensation-induced contraction of mesoporous materials

The phenomenon of adsorption-induced deformation is prevalent in both natural materials such as wood and coal, as well as in engineered materials like cement, MOFs (Metal-Organic Frameworks), and porous polymers. As the partial pressure of adsorbate vapor rises, the strain isotherm of these materials can display intricate nonlinear and non-monotonic behaviors.

Under low partial pressures, most porous materials undergo volumetric expansion. This expansion can be attributed to the reduction of surface stress and the subsequent relaxation of adsorption stress experienced by the solid skeleton—a phenomenon commonly known as the "Bangham effect." This effect is well-described by the surface poromechanics formulation proposed by Zhang (2018). For microporous materials, early adsorption can lead to a subtle shrinkage before the onset of swelling. This is linked to the development of negative disjoining pressures in nanopores, as explained by Eskandari-Ghadi and Zhang (2021).

Despite these advances, the current surface poromechanics formulation is only for a single-phase pore fluid and therefore, does not apply to partially saturated porous media nor capture the dynamics of phase transition of the pore fluids. For this reason, it is unable to model the sudden contraction of mesoporous media at intermediate vapor pressure levels induced by capillary condensation. This contribution outlines our progress toward developing a unified surface poromechanics formulation that meets the following criteria:
1. It takes into account the phase transition of pore fluid from vapor to liquid and the emergence of the liquid-vapor interface.
2. It accurately reproduces the water retention characteristic curve unique to each porous system.
3. It captures both the early Bangham expansion (without condensation) and the significant contraction resulting from condensation in a consistent manner.
4. The theory's asymptotes at degrees of saturation equal to 0 and 1 align with the conventional poromechanics theory for single-phase pore fluid.

REFERENCES:
Eskandari-Ghadi, M., Zhang, Y., 2021. Mechanics of shrinkage-swelling transition of microporous materials at the initial stage of adsorption. International Journal of Solids and Structures 222, 111041.
Zhang, Y., 2018. Mechanics of adsorption-deformation coupling in porous media. Journal of the Mechanics and Physics of Solids 114, 31-54.

Speaker: Yida Zhang (University of Colorado Boulder)

13:40 Role of Substrate Roughness in Soil Desiccation Cracking

Soil desiccation crack is ubiquitous in nature, yet the physics of its initiation and propagation remain under debate, as it involves complex interactions across multiple fields of mechanics, hydraulics, and thermals. Here, an experimental attempt is made to uncover the role of substrate roughness on the soil desiccation process. The substrate roughness is deliberately fabricated by 3D printing, whereas the thickness of sample and environmental humidity are controlled to eliminate the effect of large hydraulic gradient. Four types of soils with varying expansibilities were desiccated on substrates with varying roughness. It reveals that: (1) soil desiccation crack evolution can be conceived as a competing process between the shear failure of soil-substrate interface, i.e., slippage of interface, and the tensile failure of soil, i.e., crack initiation, in minimizing the total energy of drying soil; (2) substrate roughness alters the failure mode and shear strength of soil-substrate interface and its sensitivity to moisture, thereby it regulates the pattern of how soil crack propagates upon drying; (3) soil expansibility is recognized as a key factor governing the crack-initiation point in addition to the widely recognized air-entry, and flaws in soil are the sources for the 120° crack angle and bimodal crack angle distribution.

Speaker: Mr Yuhan Yang (Hunan University)

13:55 Molecular Dynamics Simulations of Porous Illite Clay Surfaces and Particles

Illite clay constitutes the main component of the Norwegian quick clay that is known for its tendency to transform rapidly from a solid to a liquid state under certain pressure.1 Currently the practical method for stabilizing quick clay involves the use of cement and lime, resulting in significant CO2 emissions.2 To explore more environmentally friendly stabilizers, nanoscale theoretical understanding of the mechanical forces between illite particles is essential. The interaction between clay particles depends on the thickness of electrical double layer (EDL) that can be controlled by the types and concentrations of salts.3 In quick clay, a higher salt content results in a thinner EDL and reduced repulsive force. Conversely, if the salt is leached out due to underground water, the EDL thickens, leading to a stronger repulsive force and worse stability. This research primarily focuses on non-equilibrium molecular dynamics simulations involving the direct contact between an illite particle and surface. It aims to elucidate the connections between this interaction and the variations in the EDL resulting from the addition of different salts, such as NaCl, KCl, CsCl, and CaCl2.

Speaker: Ge Li (NTNU and PoreLab)

14:10 Dynamic soil structure imaging experiments and their digital model representation

It is now well recognized that soil structure is dynamic and changes due to numerous reasons, most notably due to saturation changes. In or study, we have sampled 15 soil samples and performed a detailed X-ray microtomography (XCT) imaging study of the full wetting-drying curve [1]. By analyzing the XCT images, we revealed the dynamics of soil pore structure under slow water changes. In total, our analysis is based on 135 3D tomography scans (9 soil moisture points for each sample). We were able not only to visualize structural dynamics (which showed significant changes within the soil at ~10 µm – 3 mm pore sizes range) but also computed major classical morphological metrics. The analysis of these parameters and conceptual model of structural behavior revealed that after the wetting-drying cycle the studied soil degraded in general. This is contrary to the prevailing previous findings for mainly compacted soils where wetting-drying cycles led to structural improvements. We also found that classical metrics are not able to describe structural changes due to their low information content [2].
Now, we need something reliable to describe all structural changes and create model to describe the changes we observe din the experiments. Such a descriptor to create a digital structural model has to fully describe both geometry and topology of the soil sample and possess high information content. We shall argue that a set of directional correlation functions [3] is enough for this purpose. Compared to classical metrics they 1) contain all classical metrics within them and can also be extended to include topological measures such as persistent diagrams [4]; 2) allow to describe anisotropic structures [5]; 3), have measurable information content [2]; 4) if needed, the information content can be augmented with higher number of functions in the set and with higher-order functions [6,7]; 5) allow to establish stationarity and representativity of the structure itself [8,9]; 6) can collect dynamic structural information from different scales [10] – the very aim of the research in this area.
In this presentation we shall focus on:
- Experimental studies of soil structure dynamics by imaging with XCT;
- Description of dynamic soil structure without the use of classical approaches in the form of scalar characteristics;
- Creation of digital model of soil structure dynamics with high information content vector descriptors in the form of correlation functions.
In addition to experimental results and their interpretation, we discuss the major implications of our findings and outline a possibility to deepen our understanding of soil structure-function relationships, including dynamic hydraulic soil properties and 3D soil structure digital model based on correlation functions.

Speaker: Dr Marina Karsanina (Schmidt Institute of Physics of the Earth of Russian Academy of Sciences, Moscow, Russia)

14:25 Impact of dynamic pore structure on local macroscopic parameters

In continuum models for drying, macroscopic parameters are integral, relying on the microstructure of porous media. These parameters are determined through the volume averaging of state variables, often derived from simulations using fixed pore network models (PNM). While fixed PNM is a prevalent computational method, it typically assumes a static microstructure throughout the drying process, neglecting the dynamic changes inherent in drying deformable porous media. These changes significantly alter both the structural and transport properties of the porous medium. This study introduces an adaptive pore network model developed to capture the dynamic microstructure and mass transport kinetics of a model capillary porous medium under slow drying conditions. Through adaptive PNM simulations, key parameters, including local relative humidity and moisture transport coefficient, are derived. The findings reveal that, particularly in the later stages of drying, the non-local equilibrium effect becomes pronounced, evidenced by the deviation of local vapor pressure from equilibrium vapor pressure. Moreover, the moisture transport coefficient is primarily influenced by the liquid phase, leading to an extended transport region where the process dynamics are mainly governed by the presence and movement of liquid. This adaptive approach provides a detailed view of how microstructural changes interact with local macroscopic parameters during the drying of deformable porous media.
Acknowledgement

Funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) – Project-ID 422037413 – TRR 287.

Speaker: Jing Chen

14:40 Predictive modelling of liquid ingress into disintegrating pharmaceutical tablets

In pharmaceutical science, the disintegration process refers to the mechanical breakup of an intact tablet into small fragments to increase the surface area of the drug substance in contact with the dissolution medium [1]. Within the pharmaceutical industry, the disintegration time, which is the time required to disintegrate a tablet until no palpable residues remain, has been employed as one of the critical quality attributes to ensure the bioavailability and efficacy of end products. Despite its significance and extensive studies on the process, a universally accepted and practically employed model to quantitatively describe the disintegration process remains elusive due to the intricate physiochemical interplay of the process, coupled with complex formulations and manufacturing conditions.

At the microscale, determining the propagation of a capillary driven flow requires a solid understanding of the capillary structure including its deformation over time. However, it is practically impossible to capture the complexity in sufficient detail using established analytical methods for pharmaceutical tablets. We instead studied the propagation of the liquid front within the porous matrix, recognising the role of the advancing liquid as the initiator of all subsequent phenomena. Employing the terahertz pulsed imaging (TPI) technique coupled to an open immersion setup allowed us to precisely monitor the in-situ location of the liquid front whilst controlling the influence from the experimental setup on the liquid flow [2]. This approach successfully captured the liquid ingress profiles of complex formulation tablets and revealed two regimes of liquid propagation: 1) an initial rapid uptake regime and 2) a subsequent slower linear regime, which was rate-limiting in determining the disintegration time.

Our results suggest that the linearity in transport results from the synchronised propagation of the liquid front and the erosion at the interface in touch with the dissolution medium [3]. Consequently, we employed this mechanism to develop a predictive model for the disintegration process of pharmaceutical tablets where each regime was modelled as a time-evolving porous medium in terms of swelling and erosion and its terminal structure transitioning inward. Based on TPI measurements, the associated fitting parameters were extracted to quantify the mass transport behaviour of the two regimes and compared across different tablets. This methodology and modelling offers insights into the disintegration process of pharmaceutical tablets and shows potential applicability in understanding disintegration for a range of swelling and eroding porous media.

Speaker: Jongmin Lee (University of Cambridge)

13:25 → 14:55 MS05: 1.2

13:25 Co-transport of engineered nanoparticles and bacteria in soil

Increasing production and wide application of engineered nanoparticles lead to their ultimate release into the environment, thereby contaminating water, air, and soil. Suspended bacteria are ubiquitous in the subsurface and can affect the transport of nanoparticles. This study investigates the fate and transport of zinc oxide nanoparticles (nZnO) in saturated soil in the presence of suspended E. coli through a coupled experimental and modelling approach. E. coli was found to enhance the transport of nZnO. However, E. coli transport was retarded in the presence of nZnO. The difference in the transport behaviour of nZnO and E. coli during the cotransport and individual transport studies is because of the competition between them in finding attachment sites on grain surfaces and also due to the formation of nZnO-E. coli heteroaggregates. The experimental results were successfully simulated using a model which accounted for nZnO and E. coli retention in soil, heteroaggregation kinetics, and heteroaggregate retention in soil.

Keywords: ZnO nanoparticles, bacteria, cotransport, modeling, soil

Speaker: Rima Manik (Indian Institute of Technology, Hyderabad)

13:40 Pore-Scale Modeling MICP Process and Investigation of the Effect of Pore Structures on Calcite Distribution

Abstract: The microbially induced calcite precipitation (MICP) technique holds promising applications in groundwater remediation, gas storage, soil improvement, and rock fracture sealing. In this study, a two-dimensional pore-scale numerical model is developed to simulate the coupled flow, reactive mass transport processes, and precipitation processes in MICP. In the presented model, the lattice Boltzmann method (LBM) and finite element method (FEM) are employed to solve the incompressible Navier-Stokes equations and the advection-diffusion-reaction (ADR) equation, respectively. The presented model considers the processes of bacterial transport and attachment, ureolysis, and the bacterial and calcite detachment induced by the shear effects of the flow. With the presented model, multiple field profiles including the flow field, concentration field, and the calcite distribution can be obtained in the pore space. The presented numerical model is validated based on the experimental data from the literature. To investigate the effect of heterogeneous pore structures on calcite distribution, different scenarios are carried out. The simulation results demonstrate that the pore structures with large pore throats result in more calcite accumulation. For heterogeneous pore structures with upper or lower distribution, the calcite distribution is dominated by the flow direction. Moreover, the quantitative results are presented in the evolution curves of calcite proportion, and the trend of evolution curves in different areas can reflect the homogeneity of the calcite distribution. The distribution of the evolution curves in various areas is aggregated, indicating a uniform calcite distribution.

Speaker: Dianlei Feng

13:55 Bioclogging during underground hydrogen storage: Assessing impact of biofilm formation on hydrogen injection and recovery.

In response to the urgent global concerns regarding climate change, there is a critical need for the evaluation and implementation of reliable renewable energy solutions. To bridge the energy demand-supply gap, immediate research into effective energy storage methods is imperative. The use of green hydrogen, generated via renewable electricity's electrolysis, is receiving increased attention, owing to its low volumetric calorific value (3 kWh/m3) and high mass energy density (33.3 kWh/kg). Hydrogen gas as an energy carrier can be stored in large amounts in subsurface reservoirs, such as salt caverns, saline aquifers, and depleted hydrocarbon reservoirs. However, even at minimal aqueous concentrations, hydrogen serves as an attractive electron donor for subsurface microorganisms, including methanogens, sulphate-reducers, homoacetogenic bacteria and iron (III)-reducers. Microbial growth in porous media leads to biofilm formation, narrowing the rock pores and causing potential bioclogging. Therefore, assessing these microbial effects in underground hydrogen storage is crucial to estimate risks associated with gas injectivity, loss, and recovery in large-scale operations.
This study investigated hydrogen consumption by two sulphate-reducing microorganisms in a pressurized microfluidic chip at 10-100 bar and 37 ℃, mimicking conditions akin to shallow gas reservoirs. The microbial cells congregated at the interface of the aqueous phase and hydrogen gas, utilizing the hydrogen to form biofilms. However, bioclogging resulting from biofilm formation was observed when utilizing Lactate as the carbon source, while no such clogging was observed with hydrogen gas. Under the microscope, the comparison between biofilm formations using Lactate and hydrogen gas revealed notable differences. The Lactate-formed biofilm appeared denser and tightly packed, whereas the hydrogen gas-formed biofilm displayed a crystal-like structure. Further analysis with Raman spectroscopy uncovered disparities in the protein structures within these biofilms.After one week of cultivation in a hydrogen-rich environment, the biofilm appeared to detach from the pore network following the second hydrogen injection drainage. Our hypothesis proposes that this reduction in the biofilm might be due to a shift in bacterial behavior, potentially transitioning from a biofilm-mode to a planktonic-mode state in an environment abundant in hydrogen. Biofilm formation and its adhesion to solid surfaces directly impact wettability, notably increasing hydrophobicity. This change in contact angles leads to a decrease in capillary entry pressure during hydrogen injection, thereby improving drainage efficiency.
These findings emphasize the substantial impact of biofilm dynamics and wettability changes on the efficiency of hydrogen injection and recovery processes in subsurface reservoirs. The results offer critical experimental evidence concerning the microbial risks linked to underground hydrogen storage, thereby contributing to the validation of the upscaled model within this context.

Speaker: Na LIU (University of Bergen)

14:10 Impacts of viscous fingering on bio-methanation risks during underground hydrogen storage

Hydrogen (H2) can be used as an effective energy vector and is a key element in the energy transition [1]. To accommodate the significant volume of H2 involved in the future energy mix, subsurface porous media, such as saline aquifers and depleted hydrocarbon reservoirs, is increasingly promoted as a viable option for underground H2 storage [2]. However, the reliability of this form of storage is not yet proven. One of the concerns is the impacts of microbial activity on the storage performance of H2 [3]. This is because H2 is a superb electron donor and can trigger a variety of microbial metabolism [4]. For example, H2 may initiate the bio-methanation process when carbon dioxide (CO2) is used as cushion gas in the subsurface environment. This process may lead to H2 loss and the contamination of the back produced gas. On the other hand, H2 has very low viscosity and thus is susceptible to the development of viscous fingering, when being injected to displace a more viscous fluid [5]. In this numerical work, we investigated the joint impacts of bio-methanation and viscous instability on the storage and recovery performance of H2. We have performed a range of 2D vertical cross-sectional models with a very fine cell size (0.1 m) to capture the viscous fingering in detail. It has been found that the viscous instability can expand the total size of the mixing zone and thus promote H2 consumption by methanogenesis. Since the process leads to the reduction in total gas volume, the primary purpose of cushion gas injection, which is to prevent water breakthrough, can be compromised. As a comparison, a gravity-dominated operational strategy is designed to isolate and thus ascertain the role of viscous instability on the bio-methanation process. Although gravity can drive the segregation between H2 and CO2, permeability heterogeneities lead to flow dispersions and gas mixing. However, the total mixing zone is much reduced and thus the methanogenesis is suppressed. The results of this work can be used to improve the numerical simulations associated with H2 storage in subsurface porous media, including both hydrodynamic and microbiological processes. This study should also provide useful insights and definitions of “target properties” (e.g. acceptable rate of methanogenesis) for experimentalists and industry engineers involved in screening projects for subsurface H2 storage.

Speaker: Gang Wang (Heriot-Watt University)

14:25 Field-scale mathematical modelling and simulations of biofilm effects in hydrogen storage

Underground hydrogen storage (UHS) allows for large-scale energy retention using depleted hydrocarbon reservoirs, saline aquifers, and salt caverns. Biofilms, defined as an aggregate of microbes enclosed in a matrix of extracellular polymeric substance (EPS), are sophisticated systems where different biological, chemical, and physical processes occurs such as growth, erosion, sloughing, attachment, formation of metabolites, etc. While in some applications we can benefit from biofilms (e.g., food industry, water quality), biofilms can also become an obstacle, especially for UHS regarding injectivity and hydrogen loss. Numerical simulations can assist on a better understanding of the interactions between biofilms and hydrogen in cyclic operations involving injection, storage, and withdrawal periods.

The aim of this work is to develop and implement a mathematical model to perform field-scale UHS simulations including biofilm processes. We can find in literature comprehensive multi-component bio-reactive models for UHS (e.g., Hagemann et al. (2016)). Since field-scale simulations require running the model on large spatial and temporal scales, then simplified models are suitable to deal with the heavy computational burden. Still, the simplified model must capture the key processes and quantities. Here, the main mechanisms related to microbial activity are the consumption of hydrogen by the biofilm, porosity reduction due to the development of the biofilm, and biofilm detachment because of higher flow velocities. To this end, the fluid is modelled as a two-phase (liquid and gas), two-component (water and hydrogen) system, while the biofilm is modelled as a solid phase attached to the rock, which grows due to hydrogen consumption and suffers erosion due to the flow.

The mathematical model is implemented in the industry-standard simulator Open Porous Media (OPM) Flow (Rasmussen et al., 2019). The existing hydrogen module implementation is extended to include biofilms, which allows for flexibility to account or neglect the biofilm effects on the simulations. For example, in Strobel et al. (2019) the authors presented a history matching study where microbial activity was identified in the field during hydrogen injection, leading to a successful match after adjusting the initial biofilm density.

We apply the model to assess the hydrogen loss under different injection strategies and microbial parameters. The complexity in the geological models is increased from core samples to layered heterogeneous field-scale reservoirs. We use the pyopmnearwell software (Landa-Marbán and von Schultzendorff, 2023), an open-source framework for creating the required input files by OPM (e.g., corner-point grids, tables for the saturation functions, injection schedules) via configuration files, to perform the simulations, which allows for reproducibility of the results and further studies (e.g., history matching, optimization).

Speaker: Dr David Landa-Marbán (NORCE Energy)

13:25 → 14:55 MS06-B: 1.2

13:25 A gel front liquid system with delayed properties for pore-type cracks

With the deepening of oil and gas resources exploration and development, drilling wells will encounter various problems, especially the leakage problem, which will lead to a substantial increase in drilling costs. At the same time, the uncertainty of the leakage channel in the process of reservoir leakage not only has a great impact on the drilling efficiency but also causes a large amount of drilling fluid leakage and other problems. At this stage, cement slurry plugging material is the most commonly used plugging material to deal with cracks, holes, and other malignant leakage, but the disadvantage of cement slurry is easy to be dilute with formation water mixing, so it is difficult to stay in the leakage layer in the near-well zone to the point that it can't form a dense blocking layer, so the effect of the cement plugging agent isn't particularly ideal. This paper uses anionic polyacrylamide HPAM and organic chromium crosslinker, a stabilizer to form a temperature and PH-sensitive gel system, the gel system can be added to the pre-positioning liquid to delay the gel formation time, and the system before and after the addition of the pre-positioning liquid, respectively, the performance of the analysis and evaluation, and ultimately determine the gel system. It was found that within a certain range, the release rate of Cr3+ from the organochromium crosslinker in this system accelerated with the increase in temperature, and the release rate of Cr3+ was slower when the pH was 5-7. Since the release rate of Cr3+ determines the speed of hydroxyl bridge reaction with HPAM, the purpose of delayed gel formation in a weak acidic environment can be achieved by controlling these two variables, so that the predisposed liquid system added into the gel can be controlled and sealed after arriving at the target layer, obtaining good plugging effect and laying the foundation for the future cement cementing process.

Speaker: Doudou Wang (中国石油大学华东)

13:40 Experimental Investigation and Molecular Dynamics Analysis of the Fluid-Fluid Interactions between Binary Surfactant Systems for EOR

This work aims to explore the properties and interactions between binary surfactant systems due to their ability to form mixed micelles with lower interfacial tension (IFT). The focus is on determining the synergistic or antagonistic behaviors of these systems for effective application in enhanced oil recovery (EOR) in carbonate oil fields. Our study employed a methodology comprising experimental analysis, mathematical modeling, and molecular dynamics simulations. In the experimental study, we examined eight individual surfactants and six binary surfactant systems at various ratios to determine their critical micelle concentrations (CMCs), using reservoir oil and performing experiments at reservoir conditions. Then, Rubingh's Regular Solution Theory (RST) was applied to evaluate interactions within the binary surfactant mixtures. Finally, using molecular dynamics simulations, we characterized the microscopic interactions to comprehend how hydrophilic and hydrophobic parts of the surfactants interact with surrounding media, and how they self-assemble into aggregates such as micelles or bilayers. The key findings of our work showed that the occurrence of synergism or antagonism in lowering the CMC of binary surfactant mixtures depend on both the concentration of the individual surfactant and the type of surfactant used. Nevertheless, we noted a prevalent synergistic phenomenon in all binary surfactant systems, notably influenced by the concentration of the non-ionic surfactant. Increased concentrations of non-ionic surfactants notably enhanced synergistic interactions, fostering lowered CMC values when combined with anionic, cationic, and zwitterionic surfactants. On the other hand, an excessive concentration of cationic surfactants demonstrated relatively 'weak' synergistic effects, attributed to their comparatively smaller hydrophobic tail. Moreover, the formation of mixed micelles in binary surfactant systems led to a more negative free energy of micellization, thereby achieving synergistic effects between surfactants and resulting in lower CMC values. This emphasizes the crucial role of surfactant concentration in achieving synergistic outcomes within mixed systems. Generally, binary surfactant systems demonstrated lower CMC values compared to single surfactants, suggesting the potential for their use at lower concentrations to achieve desired interfacial and recovery outcomes, thereby reducing operational costs.

Speaker: Ayomikun Bello (Skolkovo Institute of Science and Technoloy)

13:55 Wettability acoustic probing in granular porous media

Surface wettability determines the property of a solid surface in contact with a fluid. It plays a major role in reservoir engineering applications involving fluid transport phenomena. For example, it is critical to hydrocarbon recovery where wettability not only influences the sweep efficiency, but also influences the remaining oil distribution. Since the wettability tends to affect the mechanical properties of rocks, it provides a potential means to remotely monitor the movement of spilled nonaqueous phase liquids in the subsurface via acoustic monitoring. However, there is a lack of direct wettability measurement conditions in underground applications. As widely utilized methods in geophysical exploration, borehole sonic logging and seismic surveys could be used as a potential far-field probing tool for wettability changes. Understanding the acoustic response to wettability changes becomes crucial for this purpose.
To generate a favorable experimental condition for wettability acoustic monitoring, we establish an ultrasonic experimental basis for observing changes between hydrophilic and weakly hydrophilic conditions in (partially) saturated granular porous media. Glass beads are employed to construct granular porous media with fully interconnected pores and are chemical-treated to alternate the wettability condition. Particular attention is paid to ensure the uniform distribution of water across bead packings at different saturation levels, aiming to diminish the impact of patchy water distribution.
The P- and S-wave velocities and attenuations are measured with increasing saturation for the bead packings before and after chemical treatment, respectively. The results illustrate that the chemical treatment increases contact angles and improves the water–bead coupling, leading to higher velocity and lower attenuation of coherent waves. The Gassmann-Wood-Walton model predicts the behavior of coherent waves under different wettability conditions assuming a change in the coordination number. Once reaching a critical saturation, incoherent high-frequency waves are developed with higher propagating velocities. The treatment reduces the amplitude of these incoherent waves to some degree, probably due to the improvement of water–bead coupling. We interpret the observed incoherent waves in terms of the wettability-dependent ability for water to bridge neighboring beads. The velocity of incoherent waves is exceeding the Gassmann-Wood prediction at partial saturation but is close to the fully water-saturated condition. This is suggestive of a propagation path of incoherent pulses resembling the fully water-saturated condition. In our interpretation, this is because the presence of a critical amount of water creates a favorable and wettability-dependent condition to form liquid bridges connecting neighboring grains.

Speaker: Dr Yangpu Chen (China University of Petroleum (East China))

14:10 Contact angle on rough curved surfaces and its implications in porous media

Equilibrium contact angle depends on both the chemistry of the two fluids and solid base, and the microstructure on the solid surface. Actual surface of the pore wall in porous media is typically rough and curved, which has not been well-considered in related applications. This work uses a free interfacial energy minimization approach to theoretically derive the equilibrium contact angle on two specific surface structures on flat surfaces and extends the derivation considering the surface curvatures in porous media. Results reveal the equilibrium contact angle is not dependent on the curvature of spherical surfaces, and we further prove that this conclusion applies to any point along the apparent common line at solid surfaces with any arbitrary curvature. The fundamental physics is the local mechanical balance of a composite contact among three interfacial tensions. Furthermore, the contacting mode can shift from non-wetting to wetting when the pressure difference between two fluids exceeds the entry pressure of the microstructures, which should be considered in relative dynamic scenarios such as rain droplet impact and fluid displacement in porous media. Note these conclusions are from pure theoretical analysis based on idealistic assumptions and real circumstance may deviate from these assumptions.

Speaker: Lei Liu (Westlake University)

14:25 Enhanced CO2 Storage in Saline Aquifer by Electric Field Considering Formation Wettability

Geological CO2 storage involves injecting captured CO2 into various geological formations, in which saline aquifers have the largest storage potential around the world. In the context of carbon neutrality, one of the key issues is to store CO2 as much as possible on the premise of formation stability. In this paper, we find that external electric field can enhance CO2 storage in saline aquifers. The different mechanisms of CO2 storage enhancement in hydrophobic and hydrophilic formations are revealed by molecular dynamics simulations. The following conclusions can be drawn. (1) In order to consider formation wettabilities, a carbon-based pore wall, a hydroxylated quartz pore wall and a calcite wall are constructed. CO2 tends to accumulate more readily on carbon-based wall, while H2O exhibits a higher tendency to accumulate near hydroxylated quartz wall and carbonate wall, indicating different wettabilities of the three walls. (2) On a short time-scale, CO2 is stored in adsorbed and dissolved states in saline aquifers of hydrophobic and hydrophilic formations. (3) In the absence of an electric field, the dissolved CO2 accounts for 42.50% in the hydrophobic formations; the adsorbed CO2 accounts for 12.4% in the hydrophilic quartz formations. When an external electric field is applied vertically to the wall, the proportion of dissolved CO2 in the hydrophobic formations increases to 63.23%; the proportion of adsorbed CO2 in the hydrophilic quartz formations increases to 21.76%. However, the external electric field has negligible effects in the hydrophilic carbonate formations. (4) The orientation of H2O molecules and the hydrogen bonds are further analyzed to reveal the different enhancement mechanism. In the hydrophobic formations, the external electric field induces oriented H2O molecules, leading to their preferential accumulation near the wall, rendering the initially hydrophobic wall hydrophilic, thereby reducing the available space for adsorbed CO2 and promoting its dissolution in the H2O phase. In the hydrophilic quartz formations, the external electric field drives H2O away from the surface, concurrently reducing the number of hydrogen bonds formed between H2O and the hydrophilic wall by approximately 24.22%. This reduction diminishes the hydrophilicity of the wall. In the hydrophilic carbonate formations, there are no hydrogen bonds between H2O molecules and the wall. Therefore, the electric field has negligible effects on the wettability of the wall and CO2 storage. This study proposes a novel technique to enhance CO2 storage in saline aquifers of different wettabilities by electric field. The molecular perspective revealing the enhancement mechanism is expected to provide theoretical guidance in the future practical application.
Keywords: Geological CO2 storage; electric field; molecular dynamics simulation;

Speaker: Liangyu Zhao (Chengdu University of Technology)

14:40 Experimental Investigation of Illite Clay in Norwegian Quick Clay for Sustainable Ground Stabilization

Quick clay is a young geological clay formation and has been formed during the last glacial ice age. Due to the isomorphic substitutions in these phyllo-silicates, their flat surfaces are net negatively charged (1). The Na+ cations which come from the main salt in the marine environment (35g/L) is attracted by the negatively charged surface and neutralizes it. As a result, the particles have a thin diffuse double layer (DDL), leading to flocculation in a “House- of-cards” structure (2,3,4). Due to the isostatic rebound above sea level, fresh water can infuse into the marine deposits, causing salts to leach out. With the loss of cations, the Coulomb forces between the clay platelets increase and overcome the attractive van der Waals forces, and the structure becomes extremely sensitive (5,4). When this structure is disturbed, the clay formation turns into a low-viscosity fluid, and a catastrophic landslide occurs.

To stabilize quick clay, a deep mixing technology with lime and cement is used. Although this technology has been improved over the past decades, it still has a high carbon footprint.
To provide a more sustainable stabilization, our project “Sustainable Stable Ground” investigates the quick clay formation from an atomic scale and upscale to geological scale.

Here, our focus lies in examining the interaction between clay particles through experimental investigation of illite suspensions under different conditions, such as different ionic strength and adding various additives. For our experiments we are using the Tiller-Flotten quick clay from the area around Trondheim, Norway.
Our process involves purifying the clay from the natural ground and characterize the physical- chemical properties using diverse methods such as Scanning Electron Microscopy (SEM) and Elemental Analysis (EDS). With the objective of identifying potentially sustainable stabilizers, we create different suspensions with diverse (sustainable) additives, allowing for a long-term observation of the clay-rich ground.

Speaker: Rene Tammen (NTNU Porelab)

13:25 → 14:55 MS08: 1.2

13:25 Investigating the limits of averaging: a numerical case study employing diffusion-reaction in porous media

Effective descriptions are often utilized to describe mass transfer phenomena in porous media, i.e. in heterogeneous catalysis, filtering or subsurface transport. Besides more than a century of research, the a priori determination of the relevant effective transport parameters has shown to be elusive and is still subject of research. A major challenge is the appropriate mathematical upscaling of the intricate influence of pore-scale phenomena on the Darcy-scale behavior for realistic morphologies. Typically, such upscaling procedures incorporate convenient estimates to determine the significance of the pore scale transport phenomena with respect to the Darcy scale. Often, such estimates are based on the pore space geometry, macroscopic transport properties and external process parameters. A popular example there is the assumption, that the pore side length scale is significantly smaller than the representative dimension of the porous medium.
To gain insight into the applicability of commonly used averaged descriptions with respect to the coarseness of the pore space, direct numerical simulations of diffusion with first order surface reaction in a resolved pore space were employed. There, a 3D resolved model was developed, based on the finite volume approach utilizing a second order implicit immersed boundary method to accommodate the representation of the pore space. The developing transient species profile was monitored and compared with the analytically derived profiles to the complementary averaged problem.
To investigate the limitations of the averaging approach, the numerical model was applied to a variety of model porous media with varying characteristic length scales and particle Thiele moduli. The generated insights concerning the emergence of Darcy scale behavior from pore scale phenomena will be presented and implications discussed.

Speaker: David Rieder (TU Eindhoven)

13:40 Reactive Solute Transport in Heterogeneous Porous Media

CO2 geological storage in saline aquifer is significantly influenced by the reactive solute transport in the fracture media. However, the governing factors and coupling mechanisms of solute transport within the fracture at different periods under seepage-chemical coupling remain unknown. In this investigation, reactive solute transport experiment on sandstone fracture was conducted to determine the main mineral reactions. The fracture reactive solute transport analysis model taking mineral precipitation into account is proposed, and the fracture reactive solute transport characteristics under varying Pe number and Da number conditions are analyzed. The results of the dimensionless parameter analysis revealed that the Pe number was the governing factor of the solute transport process in the short period between injection and peak concentration of CO2, and that the time to peak solute concentration decreased with increasing Pe number. Under long periods of injection conditions, the solute transport process is governed by the Da number. Mineral precipitation at a high Da number obstructs the fracture, resulting in a progressive decrease in the variation rate of Ca2+ concentration during the late stage and the bypassing flow phenomenon of flow lines and species transport pathways.

Speaker: Mengzi Ren (Northeastern University)

13:55 Fingering Instability During Mixing‐Driven Precipitation Flow: Experiments and Simulations

Reactive flows in porous media that results in precipitation of solids are ubiquitous in a wide range of applications. Laboratory studies focusing on microscopic changes of the porous media have elucidated the complexity of the precipitation patterns due to the highly nonlinear coupling between advection, diffusion, reaction, and the intrinsic heterogeneity of the pore geometry and mineralogy. Here, we study the displacement of aqueous solutions of calcium chloride by sodium carbonate in a Hele–Shaw cell where the two fluids react, upon mixing, to form calcium carbonate precipitates. We examine the case of equal reactant concentrations in detail via high-resolution imaging, which reveals a variety of precipitation patterns at different injection rates and reactant concentrations. We find that reaction along the moving fluid–fluid interface forms a precipitation band in the form of particle suspensions, whose width and particle concentration are controlled by the injection rate. This injection rate dependent behavior arises due to particle–particle agglomeration in the precipitation band. Higher injection rates generate larger particles and lower suspension mobility, resulting in miscible viscous fingering at the precipitation band. Critically, fingering has important control over the growth of precipitation amount in time, which is diffusive with time in the absence of fingering but is linear with time in the presence of fingering. Furthermore, we show that the precipitates uniformly deposit onto the top and bottom surfaces of the Hele–Shaw cell as a thin particle layer at low injection rate, but they form large particle islands at high injection rates. We develop a novel reaction-diffusion-convection model that not only captures the phenomenology of the precipitation and deposition process, but also the scaling of the temporal precipitation amount.

Speaker: Dr Benzhong Zhao (McMaster University)

14:10 Pore-scale digital twin of sorption thermal energy storage in packed bed reactor using a machine-learning assisted dual-network model

The adsorption thermal energy storage system is widely utilized for low-grade heat storage and recovery due to its environmentally friendly and efficient characteristics. In this work, we utilized a machine-learning assisted dual-network model to construct an upscaling model from micro-kinetics to reactor in order to simulate an adsorption heat release process involving heat and mass transport on a meter-scale packed bed reactor. The simulation results were compared with experimental measurements and analytical models to demonstrate the accuracy of the model in predicting temperature and concentration distribution within the system. Subsequently, we explored the impact of different boundary conditions on the internal state parameters during the adsorption heat storage process, offering valuable insights for the design of adsorption heat storage systems.

Speaker: Mingliang Qu (Zhejiang University)

14:40 Quantification of crystal surface reactivity using positron emission tomography (PET) techniques

Predicting the migration behavior of dissolved contaminants in the pore space of rock and soil is crucial for assessing the feasibility of remediation and long term waste storage strategies.
Positron emission tomography (PET) using conservative radiotracers is an established and reliable method for investigating advective flow and diffusive flux in porous geomaterials and for validating transport models [1, 2]. However, solute transport is often significantly influenced by sorption effects. Reliable data concerning these effects are crucial for analyzing remediation processes as well as predicting desired immobilization in waste storage applications.
To understand and quantify the effects of solute-mineral surface interactions, analyses beyond breakthrough curve measurements are essential. PET techniques offer unique capabilities by providing in-situ tracer propagation and concentration data with high temporal and spatial resolution, surpassing traditional flow and lysimeter experiments.
For many materials, it is desirable to quantify both reactivity and hydrodynamic flow. The simultaneous quantification of both effects requires the use of a dual tracer system. In this presentation, we discuss the possibilities of utilizing a tracer pair consisting of $^{18}$F as a reactive tracer and $^{76}$Br as its conservative counterpart. This allows the prediction of spatially resolved surface reactivities as well as the evaluation of advective flow. Using different sandy sediments as model systems, we demonstrate the quantifiability of localized sorption effects as low as 10 pmol/mm³.

Speaker: Jann Schöngart (HZDR, FS Leipzig)

13:25 → 14:55 MS09: 1.2

13:25 Invasion of Porous Layers for Electrochemical Processes: Experimental Studies and Lattice Boltzmann Simulations

In polymer electrolyte membrane water electrolyzers (PEMWE) and polymer electrolyte membrane fuel cells (PEMFC), efficient electrochemical reactions depend on the optimal flow of water and oxygen within porous electrodes. However, a significant challenge arises due to concentration losses, also known as diffusion overpotential or mass transport overpotential (Vdiff). This phenomenon is attributed to mass transport limitations caused by the counter-current flow of reactants, such as water in PEMFC and oxygen in PEMWE in the pores of the electrodes. This limitation negatively impacts the voltage output, as the electrochemical reactions are not as efficient as they could be. Understanding and addressing these mass transport challenges is essential for improving the overall efficiency of polymer electrolyte membrane-based devices.
Based on the state of the art, Lattice Boltzmann Modeling (LBM) is used to investigate the two-phase flow in the porous transport layer (PTL) of PEMWE and the cathodic catalyst layer (CL) of PEMFC. For the first case, the invasion of O2 in a water-saturated anodic PTL structure (drainage invasion process) is delineated with the implementation of the Shan-Chen LBM for PEMWE. The simulation results are discussed with respect to experimental findings and compared to pore network simulation results. For the second case, the model was tailored for the application to two-phase flow inside an initially empty GDL that is invaded by water at constant current density (imbibition invasion process). For this purpose, evaporation of water was additionally implemented in the LBM imbibition algorithm in order to investigate the relationship between water generation and removal by evaporation. For both studies, reconstructed pore structures from 3D tomography image data was used. We aim to present the overall methodology as well as the major outcomes of this study.

Speaker: Supriya Bhaskaran

13:40 Volume of Fluid based study of the three phase dynamic contact line on rough surfaces relevant for Underground Hydrogen Storage

Large-scale (TWh) renewable energy storage is crucial to achieve a net-zero green world. To accomplish this, renewable energy can be converted into hydrogen (H$_2$) and stored in large-scale volumes in giant subsurface geological reservoirs. The feasibility of underground hydrogen storage in porous reservoirs highly depends on the flow and transport behaviour of hydrogen during subsequent injection and withdrawal cycles in the reservoir, which is governed by complex pore-scale processes [1-3].

Recently, several experimental studies [4-8] have taken place, which allow for the characterization of hydrogen transport properties in the subsurface. However, some discrepancies were found in contact angle characterization results using different measurement techniques and solid surfaces. The roughness of the solid surface is a possible explanation for this [9]. To date, no study has investigated the impact of roughness on the characterization of H$_2$-brine flow.

To help shed new light on the characterization of this crucial property, the Basilisk flow solver is used to conduct numerical simulations by solving the 2D two-phase Navier-Stokes equation. The H$_2$-brine interface is captured using the Volume-of-Fluid method, and the Continuous Surface Force method is employed to compute surface tension forces. The calculation of the curvature is done using height functions. To investigate the influence of surface roughness on H$_2$-brine flow in sandstone channels, a hybrid Volume-of-fluid coupled embedded boundary solver is used. Within this solver, an intrinsic contact angle can be imposed on solids with diverse shapes, facilitating the replication of a rough sandstone surface. Dynamic contact line motion and apparent contact angles can be analysed.

By comprehending the influence of surface roughness on the contact line motion, we will gain insight into the reported experimental measurements and assess the appropriateness of using specific data as input for larger-scale simulations.

Speaker: Willemijn van Rooijen (TU Delft)

13:55 Simulation of boundaries and parameters variations of natural gas hydrate in thermofluidic dissolution based on multi-field coupling under pore-scale modeling

When natural gas hydrates are heated and dissolved, the boundaries of fluid-solid will apparently be changed, and average permeability and equivalent thermal conductivity change in coupling. We designed two different microstructures, grain‐coating type and pore-filling type, based on two common storage modes. The model size is 50 μm × 22 μm, and the solid particles are 2.0 μm × 2.0 μm. Then we use the Dual Distribution Function model (DDF) of Lattice Boltzmann method to simulate the processes of hydrate dissolution and heat convection based on coupling thermal-flowing-mechanic-chemical (TFMC).
To reduce the impact of nonlinear conditions on calculation results, it is necessary to partition the simulation area along the flowing direction and calculate the data of each partition. The grain-coating type has an initial hydrate saturation of 43.6% and its permeability, as determined by Darcy's law, increases from 0.43D to 2.91D. Similarly, the pore-filling type model has an initial hydrate saturation of 36.6% and its permeability increases from 0.43D to 2.64D. The relationship between permeability K and hydrate saturation Sh is linear, as the simulation area was divided into four equal parts. However, the relationship between thermal conductivity (λ) and hydrate saturation (Sh) in both models is non-linear, which calculated by the convective heat transfer formulation. As the hydrate saturation decreases, the equivalent thermal conductivity firstly increases exponentially and then linearly. The initial thermal conductivity λ of the two models is about 1.47, and the final λ of the grain-coating type is about 8.47, and the final λ of the pore-filling type is about 11.63. Both models split at around 2/3 of initial saturation. The thermal conductivity equivalent, λ, is exponential with saturation from the starting point to the cut-off point, but becomes linear when saturation is less than the cut-off point. The exponential approximation is due to the high proportion of hydrates and the gradual weakening of the thermal diffusion rate compared to the convective heat transfer rate.
To investigate the multi-field coupling effect of TFMC, we analysed the flow rate (seepage field), the initial hydrate saturation Sh (solid field) and the activation energy ΔE or phase change potential ΔH (chemical field). Changes in velocity will not affect the linear relationship of permeability, but will significantly increase thermal conductivity and shorten the nonlinear section. The changes of initial hydrate saturation Sh will not affect the linear law of permeability, but it is necessary to increase the number of calculated partitions to make the results more linear. The demarcation point of equivalent thermal conductivity is kept on about 2/3, only the final results are changed. The activation energy change (ΔE) and phase change potential (ΔH) indicate different types of hydrates. The permeability or equivalent thermal conductivity do not change significantly.
In summary, the DDF-LBM can be used to simulate the unsteady convective heat transfer process of hydrate dissolution. According the above analysis, more accurate parameters can be provided for thermal flow mining natural gas hydrate under seafloor, which considering the multi-field coupling conditions of TFMC.

Speaker: Zhengyi Li (China University of Petroleum (East China); University of Science and Technology Beijing)

14:10 Identification and assessment of three-phase boundaries in porous electrodes of solid-oxide electrolysis cells based on a 3D microstructure model

Hydrogen energy is regarded as a promising energy carrier due to its high energy density and non-pollution. Solid oxide electrolysis cells (SOECs) have been studied extensively as a promising way for massive hydrogen production from renewable but unstable energy sources. The electrode microstructure of SOECs has a significant influence on their electrochemical performance. To better understand the relationship between their microstructures and electrochemical performance, the quantification of key microstructural parameters such as the three-phase boundary (TPB) density and phase connectivity are required. The density and activity of the TPB sites are crucial in determining the electrochemical performance of SOEC electrodes. Therefore, it is also important to find the quantitative relationships between the active TPB density and electrochemical performance. Many efforts in microstructural analyses of SOEC electrodes via focused ion beam-scanning electron microscopy (FIB-SEM) have provided a great opportunity to link the microstructural properties to the electrode performance and the active TPB density is usually evaluated from geometrical models. However, due to the influence of conductivity and mass transfer of the gas phase, not all TPB identified from the geometric models are electrochemically active. Also, it is hard to quantitively calculate the active TPB density linking to the charge transfer. Here, we developed a comprehensive method to distinguish the active and inactive TPB which combined the image-based method and finite-element (FE)-based method. A 3D pore-scale model based on the real three phases and TPB lines was built to capture mass transfer, electron/ion transfer, and electrochemical reaction processes. The TPB sites were assessed with their contributions to the total current of the electrodes. By comparing the active TPB densities calculated from geometrical models (image-based method) and that of the developed model in this study (combined image and FE method), the proposed model was more accurate in predicting electrode electrochemical performance. This provides an effective way to reduce experimental costs and time but also deepens our understanding of the microstructure of porous SOEC electrodes.

Speaker: Yuzhu Chen (South University of Science and Technology)

14:25 Digital Porous Material Analysis with Multiscale REV

Digital Porous Media Analysis (DPMA) is the process of using imaging and simulation techniques (e.g., x-ray computed microtomography, Pore-Network Modelling (PNM) and Direct Numerical Simulations (DNS)) to investigate the properties of porous materials. With DPMA, physical processes are investigated in the real structure of a sample and effective porous media properties (e.g., permeability and capillary pressure) are estimated. These properties can then be used for upscaling, provided that the sample investigated is a Representative Elementary Volume (REV) of the full domain of interest. However, most porous materials relevant to the energy transition are multiscale, and thus have pore structures (e.g., microporosity, channels, vugs) spanning several orders of magnitude in size. An REV of such materials cannot be fully characterised by a single image, which would either be too small to be an REV or lack the resolution to accurately resolve the pore/solid interfaces. In this work, we define a multiscale REV of a porous material as an image that can be segmented into resolved and unresolved parts, and for which, for each unresolved voxel, the properties can be associated with a higher resolution image that is an REV of the underlying structure inside that voxel, the combination of which provides an REV of the full domain of interest. Our multi-scale REV workflow is demonstrated on several examples, including microporous carbonate rocks and 3D printed hierarchical foams, and employs multiscale simulation techniques (e.g., Darcy-Brinkman-Stokes models, multiscale PNM) first to confirm a multi-scale REV and then to simulate reactive transport and multiphase flow processes while estimating properties such as permeability, dispersivity and capillary pressure.

Speaker: Julien Maes (Heriot-Watt University)

14:40 Digital rock reconstruction considering high stress

Abstract
As the development of medium and shallow oil and gas reservoirs progresses into the mid-to-late stages, the focus of petroleum exploration is shifting towards deep and ultra-deep reservoirs. Deep oil and gas reservoirs are defined as those with burial depths exceeding 4500 m, while ultra-deep reservoirs refer to those buried beyond 6000 m. These reservoirs exhibit characteristics of high stress, significantly impacting the pore structure of reservoir rocks and, consequently, influencing microscopic flow of oil and gas. Digital rocks serve as a crucial platform for simulating flow at the pore scale. However, existing methods for reconstructing digital rocks fail to account for the effects of high stress. In this study, we propose a novel method for reconstructing digital rock cores considering high stress based on the discrete element method (DEM). The first step involves transforming scanned results obtained under room temperature and pressure conditions into a DEM model. We employ the watershed algorithm to segment CT scan images, utilize spherical harmonic functions to represent particle contours, and transform them into clump particles in PFC3D. Subsequently, a DEM model is established with porosity matching that of the actual rock. The accuracy of the model is evaluated using two-point correlation and linear path correlation functions. The second step involves setting micro-mechanical for the contact constitutive model between particles, applying stress simulation calculations, and converting the results into voxel data. The third step analyzes the geometric and topological structure of pores under different stress combinations, along with the evolution of permeability. The feasibility of the proposed digital rock core reconstruction method is validated through the analysis of Bentheim sandstone as a case study.
Keywords: digital rock reconstruction; the discrete element method; high stress; pore structure
Acknowledgments
This project was jointly supported by the National Natural Science Foundation of China (Grant No. 52034010), Sinopec Science And Technology Entry Program (No. P21072-1).

Speaker: Chunqi Wang

13:25 → 14:55 MS13: 1.2

13:25 Pore aperture regulated surface adsorption and mass transfer of hydrocarbon and CO2 in organic nanopores

Shale oil, widely distributed in organic (i.e., kerogen) nanopores, is playing an ever-increasing role in addressing the global energy crisis, but is faced with challenges of low recovery efficiency due to well-developed nanopores. It is believed that the pore size distribution of kerogen is in the range of several angstroms to tens of nanometers (AAPG bulletin 96 (6): 1099-1119). In such a narrow pore space, oil molecules are dominated by adsorbed phase, which is hard to recover relying on pressure drop (International Journal of Coal Geology 147 (2015): 9-24). CO2 huff-and-huff is identified as a promising method to enhance oil recovery while achieving CO2 sequestration. Clarifying the adsorption and extraction behaviors of hydrocarbons in kerogen nanopores is crucial for accurately predicting oil recovery and revealing CO2 enhanced oil recovery (CO2-EOR) mechanisms.
In this work, we adopted molecular dynamics (MD) simulation to study the static spatial distribution and dynamic mass transfer of hydrocarbon and CO2 in slit-shaped kerogen nanopores by carefully designing a series of pore apertures. It shows that the adsorption and extraction behaviors of oil molecules are closely related to pore aperture. Interestingly, we found that the surface adsorption of oil molecules demonstrates a non-monotonic trend of rising after falling as the pore size decreases. Specifically, when the pore size is reduced to a certain value, oil molecules exhibit a pseudo-double layer adsorption state, in which the surface adsorption peaks of oil molecules are significantly weakened. On the other hand, although the reduction of pore width adversely affects the extraction speed of oil during CO2 soaking, the recovery efficiency presents a jump for the oil at pseudo-double layer adsorption state. Meanwhile, the surface adsorption of CO2 is also greatly enhanced, which leads to the highest CO2/Oil ratio in the nanopores. Collectively, our work provides fresh and important insights into hydrocarbon occurrence state and CO2-EOR mechanisms in organic-rich shale reservoirs and builds up a good foundation for accurate predictions of oil recovery.

Speaker: mingshan zhang (东北大学)

13:40 Molecular Simulation of Competitive Adsorption of H2S-Containing CO2 and CH4 in Organic and Inorganic Shale Nanopores

Objectives/Scope:
Geological storage of acidic gases can reduce atmospheric emissions of CO2 and H2S, thus serving as a critical part of low-carbon energy systems. Depleted shale gas reservoirs are good storage candidates owing to their intrinsic gas storage capacity. However, shales exhibit complex structural characteristics and abundant micro- and nano-scale pores, where gases primarily adsorb. Consequently, comprehending gas adsorption mechanisms in shale nanopores is imperative for shale gas geological storage. In this study, we simulated CO2, H2S and CH4 adsorption in organic/inorganic shale nanopores under various pressures using grand canonical Monte Carlo (GCMC) simulations. We calculated their adsorption quantities and selectivity coefficients under assorted conditions and analyzed competitive adsorption. This work elucidates shale gas adsorption from a molecular perspective and lends insights into storage assessments.
Methods/Procedures/Process:
We constructed molecular models of shale nanopores with diverse structures, encompassing hydroxylated quartz nanopores and graphitic organic nanopores. We examined CO2, H2S and CH4 adsorption in these pores under various pressure conditions (373.15K). The molar ratio of CO2, H2S and CH4 was fixed at 4:1:5. CLAYff and Steele 10-4-3 potential models described quartz and graphite correspondingly, while the TraPPe and Nath force field models represented CO2/CH4 and H2S individually. Component densities and chemical potentials were computed based on gas composition. CO2, H2S and CH4 insertions, translations and rotations were conducted over 20 million MC cycles, equalizing pore gas chemical potentials to calculated values. The first 12 million cycles achieved chemical potential equilibrium, and the subsequent 8 million cycles collected gas distribution data. The Langmuir-Freundlich adsorption model fitted the isotherms. Competitive gas adsorption was examined by quantifying adsorption quantities and selectivity coefficients.
Results/Observations/Conclusions:
Gas adsorption capacities were superior in organic versus inorganic pores across all gases examined. Graphite ostensibly furnished additional adsorption sites, whereas hydrogen sulfide and carbon dioxide occupied further sites in quartz nanopores. Therein, CH4 adsorption selectivity was markedly inferior to CO2 and H2S. Excess CH4 adsorption approached 0 as pressure rose, however excess CH4 adsorption in organic pores increased with pressure. H2S displayed the maximal adsorption selectivity coefficient universally, imprinting the strongest competitive adsorption capacity, which intensified in organic nanopores. Under certain quartz pore conditions, CO2 adsorption selectivity closely approximated H2S and exceeded CH4 substantially, unveiling comparable CO2 and H2S competitive adsorption capacities in inorganic pores given natural gas presence in reservoirs.
Applications/Significance/Novelty:
This study elucidates the competitive adsorption between acidic gases and natural gas in depleted shale gas reservoirs from a molecular vantage, thus facilitating augmented comprehension of CO2/H2S adsorption mechanisms in natural gas-laden formations while steering acidic gas geological storage in shale.

Speaker: Jingkai Cui (Chengdu University of Technology)

13:55 Microscopic mechanism of CO2 huff-n-puff promoting shale oil mobilization in organic/inorganic nanopores

CO2 huff-n-puff is a potential promising approach for enhanced recovery and sequestration of CO2 in shale reservoirs. It is of great practical significance to understand the CO2 huff-n-puff mechanism from a microscopic point of view. Here, we investigate three stages of CO2 huff-n-puff promoting shale oil mobilization from organic-inorganic nanopores by molecular dynamics simulation. We show that during the adsorption process of shale oil, due to the presence of active molecules, the adsorption density and strength of shale oil on kaolinite wall are higher than kerogen, but the influence range of shale oil is smaller than kerogen. In the CO2 soaking stage, although CO2 has a desorption effect on shale oil near both sides of the wall, stripping shale oil near the inorganic surface was more effective than the kerogen surface. In addition, due to the presence of hydroxyl on the surface, when CO2 is slightly away from the equilibrium position on the surface of kaolinite, the attraction between CO2 and kaolinite will become repulsive force under the action of electrostatic force. In the CO2 puff stage, compared with the ideal model of 0 pressure, when the CO2 puff pressure is 10MPa, CO2 can effectively dissociate the "bullet head" structure of the medium component blocking the pore exit through the synergistic effect of miscible phase, viscosity reduction and swelling. Increase overall shale oil recovery by more than 37%. This work first investigates the CO2 huff-n-puff mobilization of shale oil from multiple stages, and effectively reveal the promoting effects of CO2 on different components of shale oil in each stage of huff-n-puff.

Speaker: Huaisen Song (China University of Petroleum (East China))

14:10 Investigation of Fluid Flow Mechanism Considering Multi-Component Fluids, Nanopore Roughness, and Nanopore Flexibility

Understanding the occurrence and flow mechanisms of shale oil in nanopores, as well as the impact mechanisms of fluids on solid deformation, is crucial for advancing our comprehension of fluid behavior in porous media. Prior neglect of factors such as the multi-component characteristics of shale oil, the properties of real shale nanopore walls, and nanopore flexibility has resulted in insufficient knowledge regarding the occurrence and flow mechanisms of shale oil in nanopores. In this study, molecular dynamics simulations were employed to extensively investigate the occurrence and flow mechanisms of fluids in graphene, hydroxylated quartz, rough kerogen rigid nanoslits, and flexible nanotubes. The following conclusions were drawn: (1) The occurrence patterns of multicomponent shale oil in organic and inorganic nanopores were revealed. The adsorption characteristics of shale oil are related to the pore wall elements. Components containing oxygen, nitrogen, and aromatic hydrocarbons tend to adsorb more readily on quartz surfaces, while sulfur-containing components also tend to adsorb on the kerogen surface due to interactions with sulfur elements in kerogen. (2) Real shale oil flows in real nanopores without slippage. Through simulations comparing the flow of single/multicomponent shale oil in smooth/rough nanopores, we found that slip phenomena occur only under ideal conditions (single-component oil, smooth surface). The slip does not occur in realistic shale oil flow, offering theoretical support for setting slip length in pore-scale simulations. (3) In quartz, kerogen, and graphene nanoslits, an increase in pore pressure was observed with the elevation of pressure gradients. In rigid graphene nanoslit, fluid flow induces an elevation in nanoslit pressure, with a critical pressure gradient of 1 MPa/nm. Below this threshold, pore pressure exhibits minimal variation; above it, a significant increase is observed. Higher pressure gradients lead to an increase in kinetic energy in the direction perpendicular to the wall, indicating an escalation in collision intensity between the fluid and the wall, as well as among fluid particles, resulting in a rise in pore pressure. Increased pressure gradients reduce the interaction energy between the fluid and the wall, signifying that fluid molecules are propelled further from the wall upon collision, underscoring the gradual intensification of fluid-wall collisions. (4) The intricate relationship between pressure gradient, nanopore stress, and nanopore strain was revealed. Under static conditions, the transition of a rigid and smooth nanopore to a flexible one can result in an increase in surface roughness, which leads to a reduction in the density of the adsorption layer. The pore width decreases and the pore pressure increased slightly. Fluid flow induces an increase in pore pressure and width. Simulations of fluid flow in rigid nanoslits with coupled pore width and rock compressibility, as well as in flexible nanotubes, indicate that an increase in pressure gradient leads to pore expansion. This study revealed the intricate interactions of shale oil in nanopores, offering theoretical support for understanding its flow in porous media and contributing to the efficient extraction of shale oil from unconventional reservoirs.

Speaker: Dr Tianhao Li (China University of Petroleum (East China))

14:25 Molecular dynamics investigation of water-gas two phase flow in rough clay nanopores

The gas-liquid two-phase flow in rough nanopores plays a crucial role in shale gas extraction. To deeply understand the flow mechanisms, molecular dynamics simulation (MDS) method is often employed to simulate fluid flow in nanoscale channels. However, current researches on two-phase flow at the nanoscale have mainly focused on smooth channels. In addition, accurate simulation of the rock wall material is challenging. This work aims to investigate the mechanisms of gas-liquid two-phase flow in rough shale nanopores by using MDS.
A new rough surface model is constructed by illite crystals, and the water-gas two-phase flow is simulated in it which can achieve a more accurate characterization of flow phenomena in microscale shale reservoirs. To better represent the actual formation conditions, rough nanopores are constructed by adding roughness elements to smooth wall surfaces. Methane and water molecules are introduced into the pore models. The flow process is simulated using the EF-NEMD method. Based on these, the effects of rough particles, different arrangements of rough particles, and varying relative roughness on two-phase flow are investigated. The simulation results reveal that rough particles have a significant impact on gas-water two-phase flow. Statistical analysis is used to quantify the density, velocity distributions and boundary conditions in two-phase flow.
Simulations performed under different roughness conditions demonstrate: the presence of rough particles leads to three adsorption layers of water molecules near the pore walls; it also induces a phenomenon similar to macroscopic Jamin effect during two-phase flow, which severely affecting the flow velocity. Another important observation is that compared to smooth channels, the presence of rough particles significantly increases the boundary slip length i.e. the thickness of the immobile water layer. The different arrangements of rough particles will generate different negative slip lengths. Furthermore, with the roughness decrease the influence of rough channels on gas phase flow is negligible in hydrophilic channels. The aforementioned findings provide valuable insights into the gas-liquid two-phase flow behavior in rough nanopores, which is crucial for understanding and optimizing the transport and mass transfer processes in nanoscale systems.
This work simulates water-gas two-phase flow in rough nanopores constructed by illite crystals, which has not been previously explored. The major contribution of this work lies in analysing the impact of roughness elements on two-phase flow through MDS. It provides a basis for the development of subsequent mathematical models. Simulating the actual shale reservoir can guide the optimization of production measures. These findings provide insights into the intricate dynamics of gas-liquid two-phase flow in rough channels and contribute to a better understanding of fluid transport in porous media with real-world applications, such as shale reservoirs.

Speaker: Ying Bi (University of Science and Technology of China)

14:40 Smart Water Flooding: Experimental study and Molecular Simulation

In the background of the strong oil wettability and low production by water flooding in carbonate reservoirs, low salinity water containing sulfate ions and nanoparticles can significantly change the surface wettability of carbonate rocks and thus increase the sweeping area, however, the absorption and desorption mechanisms of the oil film in the carbonate rock surface remain unclear. In this work, These problems is addressed in the framework of molecular dynamics simulation (Material Studio software) and experiments. The results were showed that sodium sulfate solution could accelerate the rate from oil-wet to water-wet and the interaction of oil molecules, water molecules, and SO42- ions at molecular scale was explained. The results of the simulations show that many water molecules travel down the water channel under the influence of several powerful forces, including the electrostatic force, the van der Waals force and hydrogen bond, crowding out the oil molecules on the calcite's surface and causing the oil film to separate.

At the same time, a hybridization technique of combining low salinity water and nanofluids was performed by using experiments such as contact angle measurement, core displacement, and NMR (Nuclear Magnetic Resonance), and the effects of different salinity water and the nanofluids concentrations on wettability alteration and enhanced oil recovery were revealed. The parameters of wettability changes and contact angle were measured at different nanofluid solutions with high/low salinity water. The experimental results revealed that the test with KCl-1+NF outperformed other compositions. As for the new method of hybridization technique, the insights presented in this study provide a good reference for further research in this area. In a word, these investigations can guide the practical application of low salinity water flooding in carbonate reservoirs.

Speaker: Nannan Liu (常州大学)

13:25 → 14:55 MS15: 1.2

13:25 Deep learning-assisted technology transition in natural hydrogen development

Although the global energy sector is shifting from the fossil-based energy systems to the renewable energy resources, the conventional energy development techniques has received increasing attentions with the mature development and the recharge by AI. With the help of AI techniques, drawing lessons from thousands of years of traditional energy development in the technology transition into the next-generation energy is an effective approach to accelerate energy transition and avoid repeated research causing unnecessary wasting. In this talk, we will introduce an iterative flash calculation scheme and a deep learning algorithm using a thermodynamics-informed neural network (TINN) to perform accurate, robust, and fast phase equilibrium calculations for realistic fluid mixtures of natural hydrogen. The development of natural hydrogen is an emerging topic in the current energy transition trend. The production process involves compositional multiphase flow via subsurface porous media. This makes studying the compositional phase equilibrium behavior essential for reliable reservoir simulation and prediction. The application of TINN architecture can accelerate the calculations for nearly 20 times. The effect of capillarity on phase equilibrium states is demonstrated. Based on simulation results, suggestions for the natural hydrogen industry chain are provided to control the possible phase transitions under certain environmental conditions that may be observed in the natural hydrogen reservoirs, storage and transportation facilities. The extremely low critical temperature of hydrogen challenges the robustness of flash calculations but facilitates the separation of impurities by liquefying certain undesired species. Moreover, phase transitions under control can be an effective approach for carbon dioxide capture and sequestration with optimized operating conditions over the phase equilibrium analysis.

Speaker: tao zhang (King Abdullah University of Science and Technology)

13:40 Multiparameter Inversion of Reservoirs Based on Deep Learning

Reservoir parameter inversion is an important technique in oil and gas exploration and development that can estimate the reservoir physical properties, such as skin factor and permeability, using observed data, such as well test data and production data. In this paper, we propose a physical accelerated neural network with multiple residual blocks (PRNN-Acc) for multiple parameter inversion of the seepage equation with a source term and a sink term. PRNN-Acc is based on the idea of physical residual neural network (PRNN), which uses deep neural networks to approximate the solution and parameter spaces of partial differential equations. PRNN-Acc adds multiple residual blocks to enhance the expression ability and flexibility of the network and avoid gradient explosion or degeneration phenomena. In addition, the input of PRNN-Acc is multiplied by three adaptive parameters, which can adjust the network training process according to the characteristics of the data and loss function and improve the accuracy and stability of the inversion. We use bottomhole pressure (BHP) data before and after shut-in as labels to invert multiple parameters for homogeneous and heterogeneous reservoirs. In this paper, three numerical experiments are designed. For homogeneous and heterogeneous reservoirs, the inversion results of this method are up to 36 times more accurate than those of PRNN. It is fully proven that the inversion effect of this method is better than that of PRNN.

Speaker: Qian Wang

13:55 A Vision Transformer for Size-Agnostic Modelling of Two-Phase Drainage in Complex Porous Media Considering Wettability, Interfacial Tension, and Resolution

The estimation of pore-scale multiphase flow fields in complex geometries using deep learning has proven challenging. This is partly because researchers have historically focused on model architecture and data quality, while the volume and variety of data may have been inadequate to capture the intricacies of multiphase flow. In this work, we introduce a novel deep learning methodology to predict phase distributions within realistic porous rocks during two-phase capillary-dominated drainage. We use Computerised Tomography (CT) images and incorporate pressure gradient, resolution, wettability (contact angle), and interfacial tension as inputs without relying on complicated expert-crafted features.
To create ground-truth datasets, we extract subsamples from CT scans of both synthetic and real rocks, including sandstones and carbonates. Primary drainage is then simulated in these sub-images by an in-house Pore Morphology-based Simulator (PMS), yielding millions of fluid occupancy instances. To maintain both pixel-wise accuracy and physical fluid connectivity, we devise a Higher-Dimensional Vision Transformer (HD-ViT). We train the model on phase distributions where the wetting phase is drained from pores solely based on their sizes, regardless of their relation to other pores and the inlet, allowing the network to focus on subtle details such as generating valid fluid-fluid interfaces. Fluid continuity is then enforced as a post-processing step by removing patches of the invading phase that are not connected to any desired inlet(s). This approach facilitates efficient inference for images of varying sizes and resolutions with any inlet-outlet setup. After training on a massive dataset of images and rock-fluid data, the model achieves outstanding results with a testing F1 score and saturation correlation coefficient above 0.95.
We confirm the model’s validity by demonstrating consistently high performance on larger images of unseen sandstone and carbonate rocks through an effective patch-and-stitch strategy. The model maintains accuracy across a wide range of scales, from microns to centimetres, within the range of properties used in this study. Such scalability enables distributed computing, facilitating the processing of extremely large images. Therefore, the reported methodology can be considered a solution to the computational constraints encountered for large images. Interestingly, the HD-ViT proves even faster than the PMS, itself considered one of the most efficient simulators of drainage. This underlines the immense potential of models trained at scale, like ours, to be fine-tuned for computationally intensive simulations using smaller datasets, where the speed advantage becomes increasingly significant.
Our final model introduces multiple innovative aspects. Firstly, setting it apart from similar models, ours incorporates all factors influencing capillary drainage as inputs, offering a comprehensive approach. Secondly, the model is trained on a dataset of unprecedented size and diversity, comprising millions of highly heterogeneous and realistic images. Thirdly, by avoiding complex feature engineering, we ensure an end-to-end, easy-to-use model. Fourthly, we implement a simple and effective strategy to enforce phase connectivity in fluid distributions and to also allow for size-agnostic predictions on any inlet-outlet configuration. As such, the HD-ViT is a multiscale, practical, and efficient model for pore-scale drainage.

Speaker: Ping Wu (School of Science, Southwest Petroleum University, Chengdu 610500, China)

14:10 A neural network model with physics constraints for simulating CO2 storage in deep saline aquifers during and after injection

The exploration of CO2 capture and storage has become a crucial element in strategies aimed at mitigating climate change, where deep saline aquifers are of particular interest due to their extensive storage capacity and widespread availability. The complexities involved in effectively monitoring and simulating CO2 behavior within these geological formations present significant challenges. To address these challenges, our research introduces a specialized neural network, designed to simulate and monitor CO2 storage in deep saline aquifers during both the injection and post-injection phases. This neural network represents an integration of physics-based principles and advanced deep learning techniques. This integration facilitates the modeling of CO2's complex movement and distribution under diverse conditions. The network's ability to process and analyze spatial data, coupled with key geological characteristics, significantly enhances the accuracy of its simulations. This aspect is crucial for understanding the heterogeneous nature of subsurface systems and the dynamic behavior of CO2. The architecture of this network, encompassing various computational layers and physics-informed constraints, is designed to ensure comprehensive and precise modeling of CO2 storage processes. This approach aims to contribute to the existing body of knowledge in the field of carbon capture and storage, offering a new perspective in the simulation and understanding of CO2 behavior in subsurface systems.

Speaker: Mengjie Zhao

14:25 2D to 3D deep learning reconstruction of CO2 electroconversion Gas Diffusion Electrode : a validation study

Direct 3D imaging of natural or synthetic porosity below ~1μm in diameter often requires the application of Focused Ion Beam Scanning Electron Microscopy (FIB-SEM). This technique has several limitations: high cost and time demands, instrument availability, complex sample preparation and low field-of-view (FoV), restricting its suitability for operational industrial studies. SliceGAN, a generative adversarial network algorithm developed by Kench and Cooper (2021) reconstructs 3D pore space based on a 2D image input (Fig. 1). In conjunction with 2D SEM imaging, SliceGAN has the potential to generate representative porous media images considerably faster and cheaper than FIB-SEM. However, the original work (Kench and Cooper, 2021) did not validate the methodology against 3D images to check whether the synthetic reconstructed media replicate the original porous materials porosity, permeability, and pore size distributions.
The microporous layer (MPL) of the Gas Diffusion Electrode (Fig. 2), used for the electroconversion of CO2 into ethylene, methanol and other products (Weekes et al., 2018), was selected for the validation of the pore space reconstruction algorithm. Fully resolved images of the MPL porosity are necessary for subsequent modelling of electrode physical properties: permeability, diffusivity and conductivity (McLaughin et al., 2022). For this study, four FIB-SEM validation volumes from two scans at 5 and 10nm resolution and FoV varying from 51 to 94μm3 were analysed. Raw data was segmented, porosity calculated, and permeability of each volume modelled using a steady state single-phase direct numerical simulation in OpenFOAM (Fig. 3). Permeability variation from 4.04e-16 to 8.03e-16 m2 between different volumes is attributed to an insufficient FoV of individual scans, leading to unrepresentative models. A large image aspect ratio, inherent to FIB-SEM scanning, also led to variation of permeability in three principal orientations in the absence of any noticeable material anisotropy.
The open-source network architecture of SliceGAN was adapted to accommodate varying training data crop sizes. Two orthogonal SEM images at 1.7nm resolution and FoV of 315 μm2 were used to prepare training datasets. Ten different studies, combining different crop sizes and input image resolutions, were trained to assess the effect of the 2D training image FoV on the quality of the reconstructed 3D volume. For each study, inference volumes with a maximum FoV of 163μm3, limited by RAM capacity, (Fig. 4) were generated, and their porosities and permeabilities calculated (Fig. 5). While properties vary between studies and between inferences within each study, an overall good match of porosity, permeability, and pore size distributions with FIB-SEM data was observed, with further research to be done on multiphase flow properties of the artificial volumes.
This study shows the verification of the 2D – 3D reconstruction algorithm, which, while not creating an exact copy of the real pore space, is able to replicate properties necessary for larger-scale physics modelling. It is also capable of generating significantly larger volumes when compared to FIB-SEM validation data. This, together with the fact that the network is trained on 2D data with a large FoV, addresses the representability issues observed during the FIB-SEM image analysis.

Speaker: Georgy Borisochev (CHLOE)

14:40 Deep Learning enhanced multiscale rock typing for digital core modeling

Currently, there is rapid development in the approaches for constructing and utilizing digital cores. Digital Rock Physics (DRP) methods allow for quick and non-destructive acquisition of rock properties. The process of digital rock physics involves two primary stages: model construction and simulation of physical processes on the created models.
For heterogeneous reservoir rocks, the usage of DRP is not as straight forward as for high porosity sandstones. This is due to the inherent trade-off between the spatial resolution of data and the representativeness of the model size. The primary goal of this study was to establish a technique for upscaling digital core models from micro to macro scale, enabling the computation of rock properties while accounting for heterogeneities of various scales.
The upscaling procedure involved searching for correlations between tomography data of different resolutions and transforming low-resolution tomography into a multiclass model according to the found correlation. The approach of using convolutional neural networks for high-resolution tomography data was considered as the optimal algorithm for transforming low-resolution tomography into a multiclass model. The output of the neural network was an upscaled model of lower resolution than the original tomography. Each element (voxel) of the upscaled model belonged to one of several digital types of rock, whose generalized characteristics were determined based on the analysis of high-resolution tomography data.
To validate the upscaling technique we constructed a digital model of complex carbonate reservoirs based on data from multiscale microtomography. A multiclass model concept has been created and experimented with, enabling the computation of flows in pore spaces of various scales. By incorporating diverse pore space structures as supplementary classes in the multiscale model, it is possible to preserve a substantial physical size of the model while enhancing its level of intricacy.

Speaker: Denis Orlov (Skolkovo Institute of Science and Technology)

13:25 → 14:55 MS21: 1.2

13:25 Wave-mediated diffusion model for semi-sealed systems: effective diffusion coefficient and experimental validation

It is widely known that the motion of a gas at a low Mach number can be approximated as an incompressible flow at the leading order in a small Mach number expansion of the full solution (Anderson 1995; Panton 2013). However, it has been shown recently that such an incompressible approximation becomes invalid for a semi-sealed system with no inlets and no boundary movements. Studies based on linearized compressible Navier-Stokes equations for such a system made of small capillary tubes have revealed some counter intuitive flow characteristics such as no-slip flow with a slip-like mass flow rate (Chen and Shen 2018a, b; Shen and Chen 2019a, b; Shen and Chen 2020). In this work, we extend these works to a semi-sealed porous system which has applications to microfluidics and primary production from a tight gas reservoir.

Based on the compressible N-S equations and the theory of Klainerman and Majda (1982) for low Mach number flow, Jin and Chen (2019) has shown that at the pore-scale, the flow of the gas obeys a damped wave equation. Applying multi-scale analysis and volume averaging upscaling to the pore scale equation, Jin and Chen (2019) obtained a self-diffusion equation at the macroscopic scale in the limit of infinitesimal pore size. To account for small but not infinitesimally small pores, the effective macroscopic diffusion coefficient must be modified to consider the effect of wave-mediated diffusion. We first perform pore-scale numerical simulations of drainage flow from a porous plug using the damped wave equation. The mass flow rate from this simulation is then matched to the one computed from the macroscopic diffusion equation with an adjustable diffusion coefficient. The diffusion coefficient that provides such a match in the mass flow rate is then the effective diffusion coefficient.

A large number of pore scale simulations are performed for various pore structures. We study slow viscous drainage flow of a viscous compressible gas from a semi-sealed porous plug to a large vessel. The semi-sealed porous plug has a length of , height of ; and the vessel has a height of and extends to infinity downstream. We then use the homogenized medium shown in Figure 1 and the macroscopic diffusion equation with various effective diffusion coefficients to compute mass production rate from the plug. From the simulation results, it is found that the larger the porous plug length and its porosity, the larger the effective diffusion coefficient. The larger the expansion ratio, the smaller the effective diffusion coefficient. An empirical correlation of the effective diffusion coefficient is then established for applications to larger physical size. The proposed wave-mediated effective diffusion model as well as Darcy’s law are both used to perform historic match with the data from laboratory experiments. The comparison shows that the wave-mediated effective diffusion model provides good agreement with experiments whilst Darcy’s law severely underestimates the flow rate.

The proposed wave-mediated diffusion model is promising for applications for primary production from tight gas reservoirs. Testing of this model with field data is currently underway.

Speaker: Shiming Wei (China University of Petroleum, Beijing)

13:40 Non-linear growth of fingers during two-phase flow in porous media

Invasion of a fluid in a porous medium filled with another fluid immiscible to the injected one produces a wide variety of displacement patterns depending on the fluids’ viscosity contrast and the capillary number of the flow. In the case of a low-viscosity fluid advancing through a high-viscosity immiscible fluid, a viscous instability occurs, leading to viscous fingers which have long been assumed to exhibit a linear Laplacian growth behavior. This means that the interface velocities of the advancing fronts depend linearly on the local pressure gradient. This (linear) Laplacian growth behavior is also observed for viscously-unstable fingers observed in continuum Hele-Shaw cells by Saffman and Taylor [1], as well as for diffusion limited aggregates (DLA). However, an experimental study of drainage in a porous Hele-Shaw cell around 20 years ago [2] demonstrated that drainage fingers in porous media can also exhibit non-linearity in the growth in a certain regime. Recently we further investigated this configuration of drainage displacement with a dynamic pore-network model [3] and measured the local growth rate of the fingers as a function of the local pressure drop. We showed that there exists a regime where the two quantities relate nonlinearly with a power-law, which then crosses over to a linear Laplacian growth regime at higher capillary numbers [4]. The origin of this nonlinearity is the disorder in the capillary barriers at the pores [2, 4], and the pore-size distribution, through the distribution of capillary thresholds, controls this non-linearity. In our recent study [4], the pores size distribution was uniform. Here in this talk we will present our further investigations on the sensitivity of these results on the distribution of pore sizes, and how the exponent related to the fingers’ growth law depends on the functional form of that distribution.

Speaker: Dr Santanu Sinha (PoreLab, Department of Physics, University of Oslo, N-0316 Oslo, Norway)

13:55 Modeling Non-Newtonian Polymer Flooding in Heterogeneous Carbonate Rock: An Experimental and Simulation Investigation

Polymer flooding is a widely used chemical Enhanced Oil Recovery (EOR) technique in carbonate reservoirs that can decrease water-oil mobility ratio and thereby enhance sweep efficiency. However, the accuracy of simulating polymer flooding in porous media relies on integrated characterization on polymer properties, especially rheological behavior of polymer. The objective of this study is to accurately model and predict shear-thickening and shear-thinning behavior of polymer injection of heterogeneous porous media by incorporating Special Core Analysis (SCAL), bulk rheology test, injectivity test and coreflooding experiments.
This study started with integrated fluid and reservoir rock characterization. Injectivity tests and coreflooding experiments were then conducted, including sea water flooding and polymer flooding in low-permeability (20 mD) and high-permeability (200 mD) outcrops. The pre-constructed polymer coreflooding simulation model was history matched with experimental results and uncertain parameters were calibrated by optimizing key indicators reflecting polymer non-Newtonian behavior in porous media. The calibrated model was then used to model the polymer in-situ rheology and EOR performance in a heterogeneous core sample combining high-permeability and low-permeability layers. Nuclear Magnetic Resonance (NMR) technology was used before and after polymer flooding to confirm the pore size distribution affected by polymer injection.
Following the rock characterization study, the base simulation model M1 was incorporated with data on porosity, end-point water and oil permeabilities, and fluid viscosity. After polymer rheology and adsorption studies, the model was upgraded to M2, which displayed increased accuracy in polymer in-situ rheology and integrity affected by adsorption. Model M2 was utilized to history match base water and polymer oil displacement efficiency experiments, and the initial match degree was evaluated. Uncertain parameters, including apparent viscosity, Inaccessible pore volume, and relative permeability curve, were then adjusted by optimizing an objective function that included pressure drop, water breakthrough time, and cumulative oil production. After multiple iterations of history match, significant improvements in accuracy were observed in the calibrated model, which was then utilized to forecast polymer coreflooding performance in the heterogeneous carbonate core sample. However, the initial match was insufficient due to the complex crossflow of polymer solution between the high permeability layer and low permeability layer. Adjustments to the vertical permeability resulted in the final model M3, which achieved a high history match degree with experimental results.
In this investigation, A polymer that has both shear-thickening and shear-thinning features was modeled and calibrated step by step based on experimental results. The outcome was the creation of highly precise simulation models with the capability of providing forecasts for polymer in-situ rheological behavior, viscous fingering phenomenon, and EOR performance in heterogeneous carbonate rock. This methodology is instrumental in advancing our understanding of the mechanisms behind the non-Newtonian flow behavior of polymers in Darcy-scale porous media through integrated experimental and simulation investigations.

Speaker: Mr Chuangchuang Qi (Khalifa University of Science and Technology)

14:10 Incorporating Pore Size Distribution into Dynamic Permeability Modelling for Porous Media

Previous dynamic permeability models often relied on simplified and assumed pore-scale parameters such as average pore radius, potentially leading to inaccuracies. This study introduces a novel approach that directly incorporates measured pore size distributions, addressing these limitations and providing a more realistic representation of fluid flow in porous media. Key findings include:

• Pore size distribution's primary impact on dynamic permeability:
  The model demonstrates that pore size and its distribution exert a
  first-order effect on dynamic permeability.
• Integration of measurable pore size data: The model utilizes pore size distributions obtained from techniques like MICP or NMR, enabling direct
  incorporation of measured data for enhanced model accuracy and
  applicability.
• Incorporation of slip boundary conditions for
  wettability effects: The model accounts for wettability's influence
  on dynamic permeability, providing a more comprehensive understanding
  of fluid flow behaviour in porous media with varying wettability
  characteristics.

Overall, this study presents a practical dynamic permeability model that overcomes limitations of existing approaches by incorporating pore size distribution and wettability effects. This model holds significant potential for improved characterization and understanding of fluid flow in diverse porous media applications, potentially leading to advancements in various fields.

Speaker: Dr Jimmy Xuekai Li (The University of Queensland)

14:25 Universal scaling law of bubble dissolution in porous media

Dissolution of bubbles in porous media affects many important geological and engineering processes, such as CO$_{2}$ sequestration, hydrogen storage, fuel cell water management and Li-battery electrolyte filling. However, although dissolution of continuous gas phase has been investigated extensively, there is still no universal theory for static bubble dissolution kinetics in porous media. We thus conduct experimental and theoretical investigation on the universal dissolution theory for bubbles in porous media.
We found that porous structure does not only change the effective diffusivity, but also regulate the characteristic mass transfer distance and surface area. In open space, the mass transfer area (S) of the bubble is the surface area of the bubble itself, and the characteristic mass transfer distance is proportional to the bubble radius R 1. These result in V~t scaling in 2-d and V$^{2/3}$~t scaling in 3-d in quasi-steady state, where V is the dissolved volume. However, in porous media, both its mass transfer area and its characteristic mass transfer distance are re-regulated by the porous structure. The concentration in the pore body is almost uniform, while the concentration gradient is concentrated along the throat (Fig.1a). Consequently, the characteristic mass transfer distance is determined by throat length (L$_{t}$), and effective mass transfer area is determined by the throat cross section area (A$_{t}$) and available number of throats (n).
For a bubble in a single pore, n is a constant, resulting in a linear V~t scaling. For a large bubble that occupies many pores, n depends on the shape of the bubble. If the bubble is completely liner, n is proportional to the volume of the bubble V, so we can deduce lnV~t. While if the bubble is a bulk, n$^{2}$ is proportional to V, leading to a V$^{1/2}$~t scaling. These conclusions have been well verified by experiments. (Fig.1b).
In addition ,we investigate the dissolution of CO$_{2}$ bubble in porous media under gravity field, where the Rayleigh-Darcy convection can be induced in the liquid phase as dissolved CO$_{2}$ increases water density. In case that the mass transfer is dominated by convection, the bubble dissolution rate becomes proportional to the flux of fresh water through the bubble. For an isolated CO$_{2}$ bubble in an infinitely-large porous medium, the flux is determined by the number of pores it occupies perpendicular to the gravitational field n_vert. Therefore, for a CO$_{2}$ bubble in a single pore (Fig.1c), the dissolution is in constant rate (V~t), that is experimentally examined.
In summary, we establish the scaling laws for bubble dissolution in porous media. We show that bubble dissolution kinetics in porous media becomes very different from that in bulk, not only in the value of diffusivity, but (more significantly) also in the volume-time scaling, because porous structure regulates the mass transfer length and area.

Speaker: Yuehongjiang Yu

14:40 Non-linear seepage characteristics and synergistic displacement mechanisms of emulsion in heavy oil reservoir

Chemical flooding by emulsification has been proved as an effective EOR method for heavy oil reservoirs. Generally, the viscosity reducer emulsifies with heavy oil and thus generates thermodynamically unstable emulsion. The rheological properties and non-linear seepage mechanism of emulsion are not clear. In addition, the synergistic displacement mechanism between chemical agents is not well known. Therefore, the paper carried out studies on non-linear seepage characteristics and synergistic displacement mechanisms of emulsion by using a combination of high-pressure rheometer and multi-scale displacement experiments.
The results of the high-pressure rheometer show that the morphology and arrangement of dispersed droplets change with the shear rate. The apparent viscosity of emulsion increases exponentially with the concentration of dispersed droplets, decreases with the median droplet size, and increases linearly with the viscosity of continuous phase. On the basis, the paper established a new model for the apparent viscosity of emulsion, which reduces the prediction error by 13% compared with that of the classical Sibree model. The results of multi-sampling point sand-packed displacement experiments show that the injection pressure increases and the droplet size becomes much smaller under shearing when the permeability is too small. The injection pressure decreases and the droplet size becomes slightly larger when the permeability is too large. In contrast, the droplet size is basically unchanged when the permeability is suitable. On the basis, a power function model is created to characterize the relationship between the droplet size in the porous medium and the permeability as well as the concentration of dispersed phase. The core displacement experiments show that the injection pressure of the emulsion increases with the seepage velocity and they conform to a power function. The shapes of the relationship curves are affected by the concentration and droplet size of the dispersed phase, as well as the continuous phase viscosity and reservoir permeability. On the basis, the paper established a new nonlinear seepage model for emulsion which reflects the pseudo-plasticity seepage characteristics and its prediction accuracy is higher than 93%. The results of large-size visualization model displacement experiments show that the chemical composite flooding can increase sweeping efficiency, promote emulsification, reduce oil viscosity and seepage resistance compared with the single viscosity reducer flooding.
The research results can help to promote the development of non-linear seepage model of emulsion in porous media and provide useful reference for future implementation and popularization of chemical flooding by emulsification in heavy oil reservoirs.

Speaker: Dr Kang Zhou (Shandong University of Science and Technology)

14:55 → 16:25 Poster: Poster Session II

14:55 A fully implicit single-phase multi-component phase transition pore network model based on automatic differentiation and GPU acceleration

The complex phase behavior of hydrocarbon mixtures is encountered in miscible flooding in the oil-saturated reservoir and liquid dropout in gas-condensate reservoir. In pore-network models, phase equilibrium calculations (Michelsen, 1982) have been coupled with convective-diffusion equations to evaluate the influence of hydrocarbon phase behaviors to flow and transport at given hydrocarbon mole compositions and temperature, as reported by Chen et al. (2020) and Santos, M.P.P.C. et al. (2020) where a fully implicit Euler method is implemented to get the set of non-linear algebraic equations at each time step solved by Newton’s method.
The number of convective-diffusion equations varies with pseudo-components number, which brings great inconvenience to the analytical programming of Jacobian matrix. In this work, the reverse derivation technique based on the chain derivation rule (Baydin et al., 2017) is applied to evaluate Jacobian matrix using a open source C++ library named fadbad++ and the program is comparable in time to the analytical programming of Jacobian matrix.
In addition, the GPU parallelization is promising to the numerical studies of multi-component flow and transport with computationally intensive nature. In our test, a graphic card RTX 3060 with 12GB memory together with CUDA library is used to speed up the steady-state and transient simulation process. The program is compared with the one running on a CPU i5-12400F with the Eigen mathematical library. The comparison results show that the acceleration rate can be about 5 times in the single-phase dynamic simulation with a pore network of 8000 pore elements, and about 10 times in the single-phase steady-state simulation with 2 million pore elements.
The coupled model is used for gas-condensate reservoir simulation to investigate the effect of droplets on gas production processes. In future work, a more efficient coupling way will be explored (Collins et al., 1992), and the existing model will be advanced to two-phase flow simulation (An et al., 2023).

Speaker: JIanqi Rong (Chongqing University)

14:55 A pore-scale lattice Boltzmann model for solute transport coupled with heterogeneous surface reactions and mineral dissolution

In this paper, we propose a pore-scale lattice Boltzmann model to treat heterogeneous surface reactions coupled with mineral dissolution. The primary innovation lies in the transformation of surface reactions, originally treated as boundary conditions, into volume source terms through dimensionality augmentation within the framework of sharp liquid-solid interfaces. This significantly simplifies the implementation, particularly for reactions occurring in porous media with intricate geometric structures. Several benchmark tests were performed to validate the accuracy of this model, including a reaction-diffusion problem in a rectangular domain, a two-dimensional reaction and dissolution of a circular grain, as well as a three-dimensional calcite crystal dissolution in a micro-channel. All the obtained simulation results agree well with the reference solutions. In addition, a dissolution problem in a three-dimensional porous meida bulit with the sandpack is then investigated. Cases with different Peclet numbers (Pe) and Damkohler numbers (Da) were simulated, and five dissolution modes were obtained, which were finally summarized in a diagram of Pe and Da.

Speaker: Ju Long (King Abdullah University of Science and Technology)

14:55 A study on the CO2 displacement behavior at nanoscale considering rough surface

CO2 displacement is considered as a potential method to enhance shale oil recovery. CO2 can reduce the viscosity and surface tension of crude oil, making it possible to recover crude oil in the nanopores. At the same time, the CO2 can also be partially stored underground, reducing the carbon footprint of the hydrocarbon extraction process. Therefore, understanding the CO2 displacement in nanometer pores of shale is critical for developing effective CO2 injection techniques. In this work, we applied direct numerical simulation to study the effect of rough surface on CO2 displacement in nanometer pores of shale. By quantifying the CO2 displacement in rough nanochannels, we aim to understand how surface roughness and morphology affect the displacement process. After considering the influence of slip effect, the CO2 displacement process in three channel models was studied (single channel, pore throat structure, nanoporous media). We found that in a single channel, the rough surface leads to the reduction of CO2 displacement paths, slowing down the displacement rate. In addition, the pinch-point effect of the rough nanochannel prevents the smooth progression of the interface contact line. The Periodic fluctuations at the interface further hinder CO2 displacement. The smoother the convex and convex transition of rough surface, the smaller the resistance effect of the pinch-point effect. In the pore throat structure model, the rough surface makes it easier for residual oil to remain in the pore. We also simulated CO2 displacement in rough nanoporous media and found that rough surfaces lead to a substantial reduction in CO2 displacement efficiency. Our simulation results show that the surface roughness of shale nanometer pore has nonnegligible effect on CO2 displacement.

Speaker: Keli Ding (China University of Petroleum (East China))

14:55 Adsorption Swelling and Anisotropic Characteristics of CO2 in Shale

Abstract. Geologic sequestration of carbon dioxide (CO2) is one of the most significant technologies to combat climate change at present. Nevertheless, the CO2 injected into shale reservoirs can expand to affect the permeability and strength of the reservoirs, affecting the efficiency of injection and the safety of storage. In this work, the strain behavior of He (1300 psi) andCO2 (850 psi) on shale samples at constant hydrostatic pressure was investigated using a self-developed high temperature and high pressure gas adsorption and expansion apparatus measuring temperatures at 308 K. The results indicate that adsorption expansion of CO2 exists in shale samples. With increasing pressure, the swelling rate increases and then decreases, and the adsorption-induced swelling strain of shale shows a Langmuir-like relationship with pressure. The adsorptive deformation of shale is anisotropic, with deformation perpendicular to the direction of the laminae being greater than that parallel to the plane of the laminae. The asynchronous response of adsorptive swelling and mechanical compression produced by CO2 gas can lead to crack expansion in rocks and rock fracture. The amount of swelling is dependent on the CO2 concentration, and the swelling of shale is mainly determined by the partial pressures of the component gases.

Speaker: Shuangshuang Lin (Institute of Rock and Soil Mechanics, the Chinese Academy of Science)

14:55 Anti-hydrate Surface Design for Utilization in CO2 Sequestration Processes

The undesired CO2 hydrates formation in wellbores or pipelines often poses a significant risk to production safety. CO2 hydrates can develop during numerous processes, such as CO2 injection for geological or saltwater storage, production wells in CO2 flooding for enhanced oil recovery, and CO2 pipeline transportation. These hydrates form when gas-water two-phase conditions are met within the hydrate stability zone. Particularly during the transition of supercritical CO2 into the gas phase, the decrease in temperature promotes the hydrate formation. Once these hydrates accumulate on a large scale and form blockages, the bulk hydrates significantly compromise the safety and efficacy of CO2 storage or hydrocarbon production. To address the challenges posed by hydrates, an effective alternative solution is to develop a new generation of passive anti-hydrate surfaces that can prevent hydrates from accumulating over time. These new surfaces can incorporate smart properties such as anti-hydrate nucleation on the surface initially and possess low hydrate adhesion strength if hydrate deposition inevitably occurs. Therefore, it is necessary to understand the fundamental interactions between CO2 hydrates and solid surfaces. To achieve this, the current study employs systematic atomistic modeling and large-scale molecular dynamics (MD) simulations to explore the underlying mechanisms and key factors influencing hydrate adhesion. The results indicate that the gas concentration in the vicinity of solid surfaces plays a crucial role in determining the structures of the hydrates intermediate layer formed on those surfaces. By increasing the gas content near solid surfaces, it becomes possible to weaken CO2 hydrate adhesion, enabling the automatic detachment of hydrates under the influence of shear flow. With a better understanding of these mechanisms, it is conceivable to develop more effective anti-hydrate strategies and enhance the safety and efficiency of CO2 utilization process.

Speaker: Rui Ma (University of Regina)

14:55 Assessing the Representativeness and Precision of Three-Dimensional Digital Rock Modeling: A Case Study on Tight Sandstone

Tight sandstones are characterized by low porosity and permeability, high clay content. Measuring the rock physics properties under low water saturation conditions using the displacement method poses significant challenges. Digital rock physics (DRP) has been emerged as a valueble method for studying of rock physics of unconventional reservoir. It should be noted that the resolution of X-ray Computer Tomography (CT) scans and sample size can impose mutual restrictions. In order to enhance the applicability of rock physics numerical simulation results, it is crucial to adequately assess the representativeness and accuracy of three-dimensional digital rocks. In this study,3 sandstone samples with porosities of 17.0%,10.8%, and 8.4%, and permeabilities of 339.7,13.2, and 0.94 mD, were selected to construct digital rocks. Seven sub-samples with diameters of 25.4,9,7,5,3,2, and 1mm were prepared for each sample. We utilized X-ray CT scanning to generate three-dimensional grayscale images of the samples, with resolutions ranging from 13.5μm to 1.1μm. These images were then segmented into five components- pores, clay, feldspathic, potassium feldspar, and high-density minerals- using a machine learning image segmentation algorithm. The volume content of the principal minerals in the multi-mineral component digital rocks was calculated and compared with the XRD measurement to assess the representativeness of the three-dimensional digital rocks with different size. The porosities of the digital rocks were determined and compared with the porosity measured in lab. This comparative analysis was conducted to evaluate the precision of the digital rocks. The outcomes of three-dimensional digital rock modeling for tight sandstones reveal that three-dimensional grayscale image acquire via CT scanning for the sample with the diameter of 25.4 mm exhibits difficulty in distinguishing between pore spaces and primary mineral types. By considering the composition of randomly distributed high-density minerals as a metric for assessing representativeness, it was found that the variability of this mineral component increases when the sample diameter is less than 5 mm. This suggests that samples smaller than this size may not adequately capture the macroscopic physical properties. As the sample size decreases, the porosity identified in the digital rock increases. However, it consistently remains lower than the experimentally measured porosity, even in the highest resolution 1 mm sample. When accounting for micropores that are smaller than the scanning resolution of CT, and incorporating them into the multi-mineral digital rocks, the computed porosities agree well with those measured in lab.

Keywords：Tight Sandstone, Machine Learning, Digital Rock Physics, Multi-mineral 3D Modeling, X-ray CT Scanning.

Speaker: Mr Fei Xian (China University of Petroleum East China)

Poster of IntoerPore.pdf

14:55 Changes in the acoustic signature of tight sandstone during spontaneous imbibition process

Abstract: Spontaneous imbibition is a process in which porous media spontaneously inhales wetting liquid driven by capillary force, which is an effective means to enhance oil recovery in tight reservoirs. At present, the observation methods of spontaneous imbibition mainly include nuclear magnetic resonance method and computer tomography method. In this paper, the method of ultrasonic testing is used to link the change of seismic attributes of rocks with the distribution of fluids, indirectly observe the spontaneous imbibition process of rocks, and explore the imbibition law of tight sandstone. The high-pressure mercury intrusion method and low-temperature nitrogen adsorption method were carried out on two kinds of tight sandstone. The pore structure parameters of the rock were calculated, and the complexity of the pore structure was quantitatively described according to the fractal characterization method. In addition, the ultrasonic test of the imbibition process of the two rocks was carried out, and the flow of the fluid was observed by the change of the velocity and amplitude of the elastic wave, and the influence of the pore structure of the rock on the imbibition was analyzed. The results show that the pore structure of tight core is complex, mainly micron pores. The initial rate of imbibition is faster, and the rate gradually slows down with the increase of imbibition height. When the fluid front reaches the vicinity of the sensor, the velocity and amplitude of the ultrasonic wave are strongly affected.

Keywords: Tight sandstone, spontaneous imbibition, ultrasonic monitoring

Speaker: Mr Fangzhou Zhao (China University of Petroleum (Beijing))

14:55 Consideration of the effect of interlayer spatial distribution on the mechanical behaviour of porous media

In the process of forming porous media by deposition of particles, due to factors such as deposition rate, gravity sorting effect and fragmentation of coarse particles, different structures of interlayers are usually formed, and the form of distribution of interlayers has an important effect on the stress distribution, structural strength and deformation properties of the porous media. However, existing structural parameters such as voidness, coordination number and friction angle cannot fully characterise the effect of interlayers on the structural stability and contact anisotropy of porous media under stress. In carrying out the research on the structural stability of porous media interlayer, the discrete element method is used to simulate the mechanical behaviour of particles in the process of compaction under triaxial stress servo, to reveal the mechanism of the influence of different interlayer parameters on the overall structure of the porous media, and to analyse the influence of the thickness and quantity of the interlayer on the mechanical behaviour and structural deformation of porous media according to the structural parameters of the formation of the porous media and the parameters of the interlayer particles. Based on the structural stability and stress anisotropy of porous media, the mechanical properties of the intercalation were found to have a particularly significant effect on the macroscopic strength and structural stability of porous media, taking into account the inter-particle contact force, contact direction, and peak stress correlation.

Speaker: Mingxin Liu (China University of Petroleum(East China))

14:55 Coupling between soil matric potential and osmotic potential

Soil matric potential and osmotic potential are widely accepted as two independent components of total soil water potential. However, laboratory observations repeatedly demonstrated that matric potential can vary with salt concentration, implying a potential coupling between matric potential and osmotic potential. To date, it remains elusive whether matric potential and osmotic potential are independent or not and why so, and a theoretical theory for quantifying the coupling between them is still missing. Herein, a theoretical model is developed to quantitatively explain this problem via a lens provided by a recent concept of soil sorptive potential. The proposed model substantiates that matric potential and osmotic potential are not independent. The increasing salt concentration can notably depress two variables underpinning soil sorptive potential, namely relative permittivity and electrical double layer thickness, leading to non-negligible decreasing (more negative) of matric potential in the high suction range, and increasing (less negative) of it in the low suction range. In turn, the soil-water interactions redistribute ions in soil water, raising osmotic potential especially for clay with high cation exchange capacity. The proposed model shows excellent performance in capturing experimental data, validating its accuracy. A parametric study implies that the neglection of coupling effects can lead to a significant underestimation of soil hydraulic conductivity in the film flow regime.

Speaker: Shaojie Hu (Hunan University)

14:55 Covalent Organic Frameworks Supported Highly Active Fe-N-C Catalyst Boosting Oxygen Reduction in Direct Formate Fuel Cell

Direct liquid fuel cells have become an ideal power source for rapidly emerging miniaturized and portable electronic products due to their advantages of cleanliness, environmental friendly, high efficiency, safety, long endurance, and fast "charging". However, at present, the cathode catalysts for oxygen reduction reaction (ORR) of such fuel cell are still mainly platinum or platinum-group noble metals, which leads to the high cost. In addition, these precious catalysts may be poisoned and inactivated during the operation of the fuel cell, seriously affecting the output performance and stability.
In recent year, covalent organic frameworks (COFs) have emerged as a potential materials for energy storage and electrochemistry conversion due to their high porosity, atomically precise structures and designable topological architectures. Thus, COFs material was synthesized in this study to serve as the support for FePc by facilely sovolthermal process, forming highly active Fe-N-C catalyst to boost ORR in direct formate fuel cell (Fig. 1a). Different load of FePc into COFs (Fig. 1b) was investigated and one could see that the most active COFs-supported catalyst (FePc1@COFs5) exhibited higher onset potential of 0.929 V (vs. RHE) and half wave potential of 0.862 V (vs. RHE) than that of commercial Pt/C (0.928 and 0.845 V (vs. RHE)) (Fig. 1c). Further, the direct formate fuel cell with FePc1@COFs5-coated cathode also archived higher power density and limiting current than that with Pt/C catalyst (Fig. 1d). The facile synthesis process and high performance of COFs-supported catalyst broaden the development for COFs application in electrochemistry energy conversion.

Fig. 1 (Seen in attachment) (a) Schematic illustration of membrane-free direct formate fuel cell with Pd-deposited Ti mesh anode and COFs-supported catalyst-coated air cathode, (b) Fe content in different samples, (c) Linear sweep voltammetry scanning for different samples in 0.1 M KOH by scanning rate of 10 mV/s, (d) power density curves of membrane-free direct formate fuel cells with 2 mg/cm2 Pt/C-coated cathode and 2 mg/cm2 COFs-supported catalyst-coated cathode.

Speaker: Mr Linghan Lan (Guilin University of Electronic Technology)

14:55 Determination of the type of free gas transport in shale gas formations based on Knudsen number from molecular perspectives

The type of free gas transport in shale gas formations includes viscous flow, slip flow, and Knudsen diffusion. These three types of transport are categorized based on Knudsen number (Kn), which is defined as the ratio between the mean free path (MFP) of gas and the pore width. The MFP of gas in nanopores is usually estimated based on the ideal gas model. However, the gas in the nanopores is not evenly distributed due to the interactions between gas and walls, and thus the gas in nanopores cannot be viewed as ideal gas, meaning the real value of Kn may deviate from the value obtained by ideal gas model. In this study, we calculated the Kn of methane (CH4) in nanopores by molecular dynamics simulations. The values of MFP in nanopores were obtained based on the trajectories of CH4. We investigated the proportions of viscous collision, slip collision and Knudsen collision, which determine the type of gas transport. By analyzing the proportions of forementioned three types of collision for different values of Kn in nanopores, a real criterion for determining the type of free gas transport was established. Results show that, at 353.15 K with the pressure lower than 50 MPa, the value of Kn of CH4 is smaller than 0.1 in the pore with the width less than 5 nm. The major type of CH4 flow is the viscous flow when Kn < 0.07, and the slip flow should be considered when Kn > 0.07. The Knudsen diffusion cannot be ignored when Kn > 0.08. The results obtained in this study are crucial for correctly determining the type of gas transport in shale formations.

Speaker: Mr Xinyi Zhao (China University of Petroleum (East China))

14:55 Do capillary and film water have equal matric suction or not in simple geometries ?

The pore water retained in the unsaturated soil includes film water stagnant on the solid surface and capillary water in corners or pores, which can be morphologically quantified by film thickness and radius of meniscus curvature, respectively. The current procedure and theory of soil water retention (SWR) measurement assume that capillary water and film water are connected in the medium saturation range and have equal suction values when they coexist especially in the clayey and loamy soils. However, the results of theoretical derivation and numerical simulations from this work reveal that the film thickness remains constant with the varying radius of meniscus curvature, not following the classical relationship. Moreover, the adsorptive suction is much higher than the capillary suction and the adsorptive interaction on solid boundary affects the shape of SWR curve significantly. These findings not only help to establish the SWR function with accurate physical meanings in the field of soil physics and hydrology, but also have important implications for understanding the general relationship between film thickness and meniscus curvature as well as measuring the disjoining pressure isotherm in colloid chemistry and interface science.

Speaker: Dr Zi Li (School of Engineering, Westlake University)

14:55 Droplet motion in flexible channels: Effects of opening angle and wettability

Passive and directional droplet transport has gained significant interest due to their potential applications, e.g., self-cleaning surfaces and atmospheric water harvesting. One novel mechanism, known as bendotaxis, involves droplets spontaneously deforming an elastic channel via capillary pressure, thereby inducing droplet motion. However, current studies have primarily focused on parallel channels, neglecting the potential influence of channel geometry on droplet motion and transport efficiency. This study aims to investigate the combined effects of channel opening angle, structural flexibility, and surface wettability on droplet motion dynamics. We employ a comprehensive approach, combining macroscopic-scale experiments, numerical simulations, and a simplified mathematical model to explore different transport modes and their associated timescales. The current study offers insights into directional droplet transport phenomena, leading to potential technological advancements in various fields.

Speaker: Haiyi Zhong

14:55 Effect of catalyst particle size distribution in the catalytic layer on the performance of water electrolysis in proton exchange membrane pore scale simulation

In this study, the effect of catalyst particle size on the performance of proton exchange membrane water electrolyzer (PEMWE) was studied by using the Lattice Boltzmann Method (LBM). The results show that compared with the catalyst particle distribution, the catalyst particle size is the main factor affecting the performance of the catalytic layer of the anode. Homogenized catalyst particles with smaller particle size can effectively increase the specific surface area of catalyst particles and increase the ECSA of the catalytic layer, thereby improving the electrochemical reaction performance of the catalytic layer. the electrochemical performance of the catalytic layer can be effectively improved by using catalyst particles with smaller particle size and more uniform distribution in the preparation of the catalytic layer (the average local reaction current is 0.13A/cm2 at 3V)
This study investigates the effect of catalyst particle sizes on the performance of a PEMWE using the lattice Boltzmann method (LBM). The findings reveal that the size of catalyst particles plays a crucial role in determining the performance of the anode CL, surpassing the influence of catalyst particle size distribution. Utilizing smaller and more uniform catalyst particles enhances the specific surface area and electrochemical reaction performance of the CL.
Key words: PEMWE，LBM，Catalyst layer，Gaussian distribution

Speaker: Jiaxin He (ChongQing University)

14:55 Efficient solution strategies for a generalized coupled fluid-porous problem

Coupled fluid-porous systems appear routinely in environmental, biological, and industrial applications. The flow interaction between the free fluid and the porous medium is strongly interface driven and can be described by the sharp interface or the transition region concept. Classical interface conditions based on the Beavers--Joseph approach are valid only for unidirectional flows parallel or perpendicular to the fluid-porous interface.

In this work, we present a coupling concept which is suitable for arbitrary flow directions. We consider a narrow transition region between two flow domains and derive a hybrid-dimensional Stokes--Brinkman--Darcy model (Ruan & Rybak, FVCA, 2023). The transition zone resolves the storage and transfer of mass, momentum, and energy and can be regarded as a complex interface. We validate the proposed coupling concept numerically against the pore-scale resolved simulations. To solve the coupled problem efficiently, we develop and investigate several preconditioners.

Speaker: Linheng Ruan (Institute of Applied Analysis and Numerical Simulation, University of Stuttgart)

14:55 Experimental study on the microbial induced mineralization for profile control and oil displacement

After the reservoir enters the high-water content stage, the development of dominant seepage channels due to reservoir non-homogeneity leads to a small wave volume of injected water and a low crude oil recovery rate. Based on Microbial Induced Calcium Carbonate Precipitation technology, using microorganisms to break down urea and generate calcite precipitation with calcium ions to plug the water-driven dominant channels formed at the late stage of reservoir development, expand the wave and volume of the medium and low permeability reservoirs, and thus improve the recovery rate. The paper verifies the ability of microbial mineralization systems to improve non-homogeneous reservoirs and evaluates the effect of microbial mineralization system injection parameters on enhancing oil recovery by alternately injecting microbes and cementing fluids through indoor experiments. The experimental results showed that the permeability was reduced by 83.53% after 4 treatment cycles compared to the non-injected microbial mineralization system; when the reservoir becomes more inhomogeneous and the permeability contrast increases to 10.42, the water absorption capacity of the hypotonic reservoir can still be reversed from 10% to 25%, and the calcium carbonate crystals formed can be kept in the reservoir for a very long time; In the enhanced oil recovery experiments, the microbial mineralization system injection volume of 0.3 PV, optimal development can be achieved by injecting 3 times alternately with water, its mineralization post-phase increased the degree of recovery by 14.51%, with a final oil recovery of 43.25%.
Keywords: High-water content reservoir, Microbial mineralization, Heterogeneous reservoir, Enhanced oil recovery

Speaker: Prof. baolei liu (School of Petroleum Engineering, Yangtze University)

14:55 Extensive pore modelling (XPM) – a coherent framework for multiscale pore network modelling

It is not uncommon for porous media to span multiple scales of heterogeneity. Geological formations are examples of such complex systems that may act as natural aquifers, hydrocarbon reservoirs or greenhouse gas sequestration units. Application of conventional single scale modelling approaches is not sufficient for representative prediction of flow in such heterogenous permeable media. Instead, a method that marries features of different heterogeneity scales needs to be established and validated.

Three-dimensional digital images of pore spaces are the foundation for numerical pore scale modelling. Depending on the image resolution and the underlying pore structure, voxel data may not be exclusively binary (void or solid), but rather a collection of grey values that indicate under-resolved porous regions. Traditional pore networks have already demonstrated their efficiency and accuracy when modelling single scale macroscopic properties where the porosity is fully resolved. However, rigorous capture of under-resolved heterogeneity remains a difficult task for this class of models.

In our work, we aim to address this shortcoming by introducing an additional set of entities referred to as Darcy nodes that complement existing pore network macro nodes and throats. Physically, the Darcy nodes correspond to under-resolved regions that are characterized by its porosity and permeability. The proposed novelty is the more systematic consistency and flexibility of the Darcy nodes allocation and integration into the existing pore network modelling workflow in comparison to the previously published methods of microlinks (Bultreys et al., 2015) or very large stochastic explicit networks (Jiang et al., 2013). We established a methodology that unites laminar and Darcy flow mechanisms as well as their transitional behaviour, similarly as it is done in the multiscale Darcy-Brinkman formulation, as shown in Figure 1. The accuracy and robustness of our model, as implemented in the XPM (extensive pore modelling) simulator, is confirmed by a comparison with more physically complicated direct numerical simulation modelling results. Finally, our development is open source that is freely and readily available to the wider audience.

Speaker: Julien Maes (Heriot-Watt University)

14:55 Impacts of diagenesis events and pathways on petrophysical properties of sandstones

Digital rock physics (DRP) is a robust tool to predict rock properties, investigate flow mechanisms in rocks, and figure out the impact factors of petrophysical properties. Nevertheless, a comprehensive analysis of the effects of diagenesis on rock properties using DRP has not been reported. During the formation of sedimentary rocks, they may experience various diagenesis events, e.g., cementation and dissolution, which lead to chemical and physical reactions. Such reactions have a significant effect on rock properties. In this talk, we present a comprehensive investigation of the effects of diagenesis events and diagenesis pathways on rock properties. Firstly, we will propose a robust method to construct the original rock model which integrates the discrete element modeling method, quartet structure generation set algorithm. Then, the original model similarly undergoes four diagenesis events (two cementations and two dissolutions) along with two different diagenesis pathways for generating new models. Finally, some properties of pore space, transport, and elastic properties of all the models are analyzed and compared to investigate the effects of diagenesis events and pathways, including porosity, fractal dimension, two- and multiple-point correlation functions, pore and throat size distributions, coordination number distribution, tortuosity, absolute permeability, velocity field distributions of single-phase flow simulation, formation factor, and elastic moduli. The comparisons indicate that the sample that experiences the cementation and then dissolution exhibits larger porosity, fractal dimension, aperture, coordination number, and permeability, and smaller tortuosity, formation factor, and elastic moduli than the one that undergoes the dissolution and then cementation. Thus, understanding the sequence and magnitude of the diagenesis process can help us to better predict the flow and mechanical properties of rocks without conducting extensive experiments and computations.

Speaker: Yuqi Wu

14:55 InPore: Image-based and GPU-Accelerated Volumetric Lattice Boltzmann Method for Pore-Scale Porous-media Flows with Applications

Recently developed image-based computational fluid dynamics (ICFD) techniques have revolutionized the study of pore-scale porous media flows (PSPMFs) by allowing for simulations within realistic porous structures extracted directly from images. Pore-scale fluid dynamics delve into the fundamental physics governing flow, transport, reaction, adsorption, and deformation within heterogeneous porous materials, marking a significant leap towards establishing heterogeneous porous media flow as a standard analytical tool. The applications of this advancement are diverse and far-reaching, encompassing scenarios such as tracking chemical contaminant propagation in underground reservoirs, understanding ink permeation dynamics, modelling sedimentation processes, optimizing hazardous waste storage, and predicting fluid flow behaviours in oil reservoirs and biological tissues. Traditionally, porous media flow was approached through temporally and spatially averaged models, relying on phenomenological and empirically derived equations such as Darcy's law. However, these conventional methods often fell short in capturing the intrinsic complexity of porous media due to the lack of suitable research tools. In this context, we present InPore, a groundbreaking computational platform that employs a kinetic-based volumetric lattice Boltzmann method to solve PSPMFs within image-derived porous structures. InPore stands out for its integrated modelling approach, seamlessly combining image extraction and fluid dynamics simulation, thereby eliminating the need for additional grid or mesh generation steps and simplifying data transfer across software packages. Furthermore, InPore leverages state-of-the-art GPU (Graphic Processing Units) parallel computing technology to enable rapid and localized computations, facilitating high-fidelity simulations. During our presentation, we will showcase InPore's capabilities through application studies and discuss its integration with supplemental mechanisms such as mass/heat transfer, interfacial dynamics, and chemical reactions. These enhancements aim to broaden InPore's functionality for tackling real-world porous media flows, thereby advancing our understanding of intricate phenomena within porous materials.

Speaker: Prof. Huidan Yu (Purdue University)

14:55 Investigating Hydrogen Storage in Pore Media of Saline Aquifers: A Numerical Study on Wettability and Pore Structure Impact

Hydrogen, as a promising clean energy source, holds significant potential for energy transition and the efficient utilization of clean energy. However, large-scale hydrogen storage poses a limitation to its large-scale utilization and further development. Saline aquifers, characterized by favorable pore space and temperature-pressure conditions, are considered promising candidates for large-scale hydrogen storage. Therefore, our study focuses on investigating the flow of hydrogen in porous sandstone media during the initial injection and extraction process.
Utilizing the volume of fluid method, we conducted direct numerical simulations of this process, scrutinizing the impact of wettability, capillary number, and pore structure on hydrogen flow, storage capacity, and loss rate. The result reveals that hydrogen flow in underground porous media is predominantly governed by capillary forces, with hydrogen primarily stored in larger pores and channels. Increasing hydrogen wettability enhances reservoir storage capacity but concurrently results in elevated residual hydrogen after the extraction process. Regardless of reservoir wettability, hydrogen losses during the initial injection and extraction process are significant. Reservoirs characterized by larger pore and throat radii exhibit higher effective hydrogen storage capacity. Additionally, reservoirs featuring higher coordination numbers and enhanced connectivity contribute to greater hydrogen storage capacity and improved recovery rates.

Speaker: Jiawei Li

14:55 Is it safe to continue relying on traditional porosity-permeability relationships?

The precipitation of secondary phases in porous media carries profound implications for the functionality and efficiency of diverse natural and engineered systems. This encompasses applications ranging from subsurface CO2 storage sites, geothermal systems, deep geological disposal repositories, tunnels, oil and gas reservoirs, to the treatment of contaminated groundwater. These precipitation processes alter the structure of porous media, reduce pore space, influence hydrodynamics, and even modify reaction rates by reshaping reactive surfaces. As a result, it becomes crucial to thoroughly investigate the hydrodynamic consequences of mineral precipitation in porous geometries. However, the prevailing practice of assessing the impact of precipitation reactions on flow and transport relies on simplistic permeability-porosity relationships. Commonly employed empirical, experimental, or theoretical models such as Kozeny-Carman, Verma-Pruess, and power law are favored for their convenience and simplicity. These models find widespread application in commercial or open-access simulators for diverse geo-energy and geo-environmental purposes. Nevertheless, our previous research has revealed that relying solely on such porosity-permeability relations introduces significant uncertainty. To address this knowledge gap and mitigate the associated uncertainty, we propose a hierarchical statistical approach to upscale the porosity-permeability relationship from the microscale to the macroscale. Our approach acknowledges the complexity of permeability-porosity evolution while still leveraging practical and readily available formulations. Simulations of the mineral precipitation process in diverse homogeneous and heterogeneous settings were conducted, and a power-law formulation for the porosity-permeability relation was fitted, resulting in a distribution of power-law parameters for each setting. This resulted in a lognormal probability distribution function (PDF) for all the cases. By incorporating this PDF into continuum scale simulations, a fit-for-purpose porosity-permeability relation is established, linking the microscopic dynamics of probabilistic nucleation and growth in porous media with the macroscopic application domain. For most objectives in reactive transport modeling, a three-step scheme adequately captures the pore-scale physics and dynamics, ensuring the representation of these properties at the application scale.

Speaker: Mohammad Masoudi (University of Oslo, Department of Geosciences)

14:55 Machine-Learning-Based Robust Optimization of Brine Extraction Well Placement in CCS Projects Using Fast Marching Method

In carbon sequestration projects, ensuring the safe management of reservoir pressure is essential for long-term security. The injection of CO2 can lead to pressure build-up, risking safety issues like caprock damage, induced seismicity, and potential leaks. While brine extraction offers a practical solution to mitigate those safety issues, it is crucial to optimize the location of the brine extraction well, especially in heterogeneous reservoirs.

Optimizing the brine extraction well location is computationally expensive, requiring numerous simulation runs to identify the most effective configuration. To perform robust optimization, which employs multiple reservoir models representing reservoir uncertainties, the computational complexity further increases.

In this study, we propose a machine-learning-based surrogate model that accurately predicts the effectiveness of the input well location with low computational cost. The proposed model incorporates the fast-marching method (FMM) to calculate the hydraulic connectivity and convolutional neural network (CNN) to extract the features of the connectivity map and predict the net present value (NPV). NPV is used as an objective function that represents the effectiveness of a brine extraction well. We applied this model to a CO2 injection site in the Pohang basin, Korea. Our model showed strong predictive performance, significantly reducing the computational costs by utilizing only 5% of the total location candidates.

Speaker: Hyunjee Yoon

14:55 Microscale pore structure of Citrus aurantium cortex affects its drying characteristics: A micro-CT and lattice Boltzmann study

The microscale pore structure of Citrus aurantium cortex has a significant impact on its drying characteristics. In this study, micro-CT scanning technology was used to characterize the microscale pore structure of Citrus aurantium cortex. To improve the image quality of the CT scanning results, a comparative experiment of the mainstream denoising algorithms was carried out, and the optimal denoising algorithm was selected. The Avizo software was used to quantify and characterize the pore structure of Citrus aurantium cortex, and the equivalent pore model was established to calculate the permeability. Based on the CT scanning results, the lattice Boltzmann method was used to simulate the heat transfer and phase change during the drying process of Citrus aurantium cortex. The results showed that the fibrous structure of Citrus aurantium cortex has a dual effect on the drying process of Citrus aurantium cortex: on the one hand, the fibrous structure hinders the evaporation of water, leading to a decrease in the drying rate; on the other hand, the fibrous structure promotes the heat transfer of Citrus aurantium cortex, making the drying process more uniform.

Speaker: WengXiang He

14:55 Molecular Dynamics Simulation Insights into CO2 and N2 Wettability of Shales Organic Matters under wide range temperatures and pressures

Geological CO2 sequestration emerges as a pivotal strategy for reducing greenhouse gas emissions and alleviating the impacts of climate change. The wettability of shale plays a crucial role in CO2 sequestration and in enhancing the recovery of oil and gas. However, the water contact angle of organic shale minerals in CO2 and N2 environments under reservoir conditions remains ambiguous. This study employs molecular dynamics simulations to analyze the contact angles in CO2-H2O-Kerogen and N2-H2O-Kerogen systems, investigating the changes in contact angles under varying temperatures (298.15K-378.15K) and pressures (5-65MPa), as well as the influence of different types and concentrations of salts. Additionally, it examines the effect of CO2-N2 mixed gases on contact angles. The findings indicate that at a fixed pressure in a CO2 environment, an increase in temperature leads to a decrease in the water droplet contact angle, suggesting an enhancement in water wettability with rising temperature. In contrast, in an N2 environment, temperature exerts a minimal impact on the contact angle. At any given temperature, as the CO2 pressure increases, the contact angle of water droplets on kerogen surfaces enlarges, indicating reduced water wettability; a slight increase in the contact angle is also observed with rising N2 pressure. Moreover, in the CO2-brine-kerogen system, the contact angle initially increases and then stabilizes with the rise in the concentration of three types of salts; the impact of Mg2+ and Ca2+ on the contact angle is more pronounced than that of Na+ at the same concentration. Furthermore, under constant temperature and pressure, an increase in the N2 component in the CO2-N2 mixture reduces the water contact angle, demonstrating that the adsorption affinity of shale organic matter for CO2 is stronger than that for N2.

Speaker: Kai Cheng (China University of Petroleum-Beijing)

14:55 Nanomechanical properties of Janus nanoparticle-stabilized Pickering emulsion in confined nanochannels

The crucial role of the interaction between Pickering emulsions and confined nanochannels in their industrial applications is well acknowledged. However, there is a limited understanding of how the modulation of deformation stability and rupture limits of Pickering emulsions occurs when they come into contact with solid walls, particularly in relation to the influence of solid particle shells. This study employs molecular dynamics (MD) simulations to elucidate the nanomechanical properties of Pickering emulsions stabilized by Janus nanoparticles (JNP) in confined channels. For the first time, a comprehensive predictive model is developed to characterize the contact behavior of Pickering emulsions with surfaces exhibiting distinct wettability. The contact stress experienced by an emulsion is found to be dependent on factors such as the equivalent elastic modulus of the emulsion, geometric deformation function, and the influence of the JNP shell along with its interactions. Additionally, it is observed that hydrophobic surfaces induce the rupture of Pickering emulsions under compression. The delay in rupture is achieved by increasing the surface coverage (ϕ) of JNP. Notably, when ϕ reaches a critical value, the JNP shell can assume an ordered quasi-solid structure, leading to a significant enhancement in emulsion stability. These findings have practical implications for the design and screening of specific Pickering emulsions, especially in applications such as enhanced oil recovery, drug or food delivery, and cosmetic ingredient absorption, where the management of deformation and rupture on solid surfaces is crucial.

Speaker: Dr yuanhao chang (university of regina)

14:55 Numerical Simulation of the Microbial Induced Calcite Precipitation (MICP) Process in Darcy-scale and Pore-scale

Microbial Induced Calcite Precipitation (MICP) technique is a "green" bio-grouting method developed in recent years, which has been applied in many engineering fields. The MICP technique has attracted extensive attention due to its high reinforcement strength and environment-friendly properties. However, MICP reinforcement often faces the problem of non-uniformity precipitation, which happens in different spatial scales and is one of the bottleneck problems restricting the further development of this technology. In this study, the uniformity of calcium carbonate precipitation in the MICP process has been studied numerically in both the Darcy-scale and the pore-scale. The influence of grouting injection strategy, non-uniform distribution of soil material properties, and pore characteristics on the uniformity of MICP reinforcement have been preliminarily investigated.

Speaker: yajie chu (Tongji University)

14:55 Numerical simulation of yttrium oxide grain sintering

Yttrium oxide is a promising and poorly studied material for the field of catalysis. It can be used as a support in catalytic processes such as carbon dioxide reforming of methane and $CO_2$ methanation. Predicting changes in the texture of $Y_2O_3$ during temperature treatment is an important material science and a computational task.

In this study, we applied a phase-field approach to obtain an accurate mathematical description of $Y_2O_3$ sintering over a wide temperature range. The general principle of the phase-field method is to describe physical quantities by a set of continuous fields that take constant values in specific regions and smoothly change in the interfaces between these regions. In the case of sintering, such areas are the individual grains of the material. The interface of the microstructure has a finite width along which the sintering materials move. The Allen-Cahn and Cahn-Hilliard equation system is used to describe changes in order parameters and mass density distribution.

To verify the mathematical model, yttrium oxide sintering experiments were carried out and data on the textural and structural properties of $Y_2O_3$ were obtained. The developed model makes it possible to calculate the decrease in the specific surface area and pore volume of yttrium oxide for pores ranging from 3 to 70 nm and determine the growth rate of $Y_2O_3$ crystallites during sintering. The model allowed us to determine that stepwise heating from 600° C to 900° C and then 1200° C decreases the specific surface area of yttrium oxide from 54 $m^2/g$ to 15 $m^2/g$ and then to 5 $m^2/g$, respectively.

It should be noted that the obtained experimental micrographs of the cross sections of yttrium oxide samples are in visual accordance with the model images. The approach used in work can be used to predict the evolution of the textural properties of porous materials (catalysts, sorbents, ceramics) under high-temperature conditions.

The study was carried out with funding provided by Russian Science Foundation grant number 21-71-20003

Speaker: Dmitry Prokhorov (Sobolev Institute of Mathematics SB RAS)

14:55 Optimizing Battery State Estimation: Overcoming Computational Challenges with Hybrid Models

To ensure the safety and reliability of batteries it is critical to accurately estimate the internal state of the battery which is crucial in Battery Management Systems (BMSs). It is crucial to have methods which, aside from yielding accurate predictions, can be applied for real time estimations. However, the advanced BMSs generating accurate results are computationally intensive and time-consuming, limiting their direct application in real-time estimation. To overcome the computational demand Deep Neural Networks (DNNs) have been applied. However, to have highly accurate models, DNNs with more complex architectures should be applied. The complexity of their architecture will hinder their efficiency for online state estimation algorithms. To tackle the goal of having highly accurate predictions while being computationally efficient, we propose a BiLSTM model as a state estimator, with its hyperparameters automatically optimized using a Bayesian Optimization (BO) framework. We show that leveraging Bayesian inference enables the use of a highly accurate state estimator with a less complex DNN architecture, ensuring computational efficiency.

Speaker: Dr Serveh Kamrava (Colorado School of Mines)

14:55 Productivity model for multi-fractured horizontal wells accounting for cross-scale flow of gas and total factor characteristics of fractures

Fractured horizontal wells are widely utilized to develop tight gas reservoirs. Accurate productivity prediction of horizontal wells intercepted by complex hydraulically induced fractures is highly challenging due to fracture branching, bending, extending, and reversing in tight rock formations. Accounting for complex tree-shaped fracture geometries in reservoirs, this study proposes a cross-scale model of gas flows from the matrix to fractures. Using the proposed framework, the well productivity can be calculated in fractured gas reservoirs with any pore size and a fracture-controlled unit. The novelty of this study is that the total factor characteristics of fractures (i.e., length ratio a, width ratio b, branching angle θ, and branching level n), pressure drop coupling between the reservoir and fracture, and gas flow regime in different scale channels can be perfectly considered in the proposed model, from which the key contributions to well productivity are derived. Subsequently, the validity of the proposed cross-scale model is evaluated in comparison with the results of Ning et al. model and field well testing. The characteristic length L0,i, fracture effective width wf, stimulated reservoir volume Vf, fracture pressure pf, pressure gradient Gf, effective permeability kf and flow conductivity Cf of tree-shaped fractures are derived using the proposed model. The results show that the well productivity is jointly determined by Gf and Cf. Moreover, the well productivity mostly depends on a and n, and it is little influenced by b. In contrast, it is almost unaffected by θ. Compared to a straight fracture, a tree-shaped fracture with characteristic parameters of a = 0.9 and n = 3 can dramatically enhance the productivity by 32 % (b = 0.5; θ = 30◦). In contrast, a tree-shaped fracture slightly increases the productivity by only 3 % when b increases from 0.1 to 0.9 (a = 0.2; θ = 30◦; n =3). Furthermore, when θ is increased from 0◦to 90◦, the productivity of a well with a tree-shaped fracture decreases by 3 % (a = 0.2; b = 0.6; n = 3). Hence, the study findings will contribute to the exploitation of tight gas reservoirs.

Speaker: Jia DENG

14:55 Relative permeability curve prediction directly from 3D digital rocks based on AI approaches

The relative permeability curve is one of the key features to evaluate the flow property of a porous medium, which is important in many subsurface engineering problems such as underground energy storage and recovery. Recently, rapid developments in the technology of artificial intelligence (AI) have offered new views to revisit the acquisition of relative permeabilities. Here, we present our systematic work on the developments of AI models for the predictions of relative permeability curves directly from 3D digital rock images. The training and testing data are generated from pore-network simulations and core-flood experiments. It avoids the use of indirect geometrical parameters as inputs in previous AI methods. It is able to cover 3D digital rocks with variable sizes and further equiped to have the upscaling capability. The results show that the AI models have high prediction accuracies over 95%, with scale information being the most important physics feature accounting for 51%, and the upscaling prediction of relative permeability curve is in good agreement with macroscopic experiment data. The new framework is also flexible and can be easily extended for the prediction of other rock physical properties according to practical demands.

Speaker: Jingwei Zhu

14:55 Remote hydraulic fracturing at weak interfaces

As the most effective reservoir stimulation technique, hydraulic fracturing has been applied since the 1950s. At the same time, hydraulic fracturing can induce seismicity or result in the loss of containment of subsurface fluids due to the high injection pressure applied during its operation, leading some projects to eventual shut-down. To mitigate such adverse impacts, an alternative approach known as hydro-shearing has been promoted for some enhanced geothermal system projects, wherein the injection pressure is kept at a low level, aiming to stimulate pre-existing networks of fractures by shearing. However, the practical effectiveness of hydro shearing is yet to be proven. In this talk, we propose another alternative stimulation approach using a low-viscosity fluid. We numerically demonstrate that with low-viscosity fluid injection, we can fracture discontinuous interfaces such as grain boundaries or natural fractures without initiating fractures at the injection point. Our results indicate the possibility of engineering reservoir stimulation operations without applying high injection pressure.

Speaker: Tao You (Montanuniversität Leoben)

14:55 RepoTREND: Software Tools for Robust Safety Analysis of Radioactive Waste Repositories

RepoTREND [1], [2] is a novel simulator that has been designed to emulate the processes that occur within a radioactive waste repository in a variety of geological formations. It provides robust functionality to simulate the release and migration of contaminants from the near-field through the geosphere to the biosphere, while estimating their radiological impact on human health and the environment.

Designed with modularity in mind, RepoTREND consists of computational modules tailored to simulate the processes within each subsystem of a repository. The inherent heterogeneity of typical repository models poses significant challenges. In addition to fundamental processes such as two-phase contaminant transport, numerous specific effects (such as container corrosion or rock convergence) have to be considered in the simulation.

The structure of RepoTREND has been designed to meet a number of challenges. These include the flexible selection of models for different regions, the seamless combination of models during simulations and the easy integration of new models and effects. The RepoTREND code is a framework for the solution of a general nonlinear system of equations. Different physics are implemented as models in library form.

Each model is defined by specific equations of state and routines for handling relevant effects, organised in libraries of equations and effects. This structure simplifies the integration of new equations and effects, and allows different models to be assigned to different grid blocks. The coupling of physical models is managed implicitly. This facilitates the solution of linear couplings between variables across grid blocks within the same matrix system.

This conceptual approach ensures ease of implementation for new effects. It also maintains flexibility, transparency and reusability as the code is extended and refined.

References:
[1] Reiche, T.: RepoTREND Das Programmpaket zur integrierten Langzeit-sicherheitsanalyse von Endlagersystemen, GRS-413
[2] https://www.grs.de/en/news/projects/repotrend-repository-safety-analysis

Speaker: Tatiana Reiche

14:55 Rock-Fluid Interaction Mechanisms between Binary Surfactants Systems for Enhanced Oil Recovery in a Carbonate Formation

Carbonate rocks exhibit a complex surface charge, making it challenging to generalize the use of a single surfactant type. Hence, the utilization of binary surfactant mixtures is proposed as a more efficient alternative. This work focuses on static adsorption, wettability alteration, and spontaneous imbibition tests to gain comprehensive insights into the underlying fluid-rock interactions in carbonate formations. The objective is to propose more effective solutions for enhanced oil recovery in carbonate formations. Our study centered on binary surfactant systems and their interactions with carbonate rock. We conducted several laboratory experiments, including static adsorption tests on eight different surfactant systems. This aimed to compare their adsorption behaviors against individual surfactants, with the aim of studying their synergistic interactions. Additionally, wettability and spontaneous imbibition tests were conducted under the reservoir conditions of a producing oil field to understand the primary mechanisms and synergistic effects of binary surfactant systems in enhancing oil recovery from carbonate formations. Our results showed a significant influence of the nonionic surfactant leading a considerable reduction in adsorption values of 53% and 28% in its anionic-nonionic and cationic-nonionic mixtures, respectively. The efficient synergism between binary surfactant systems to reduce surfactant adsorption in carbonate rocks was also confirmed in the physicochemical evaluations with a reduction in both zeta potential and pH values when compared to their individual surfactants. Furthermore, spontaneous imbibition results showed that binary surfactant mixtures exhibit maximum synergism, particularly when they system is composed of of zwitterionic and non-ionic surfactants. This surfactant blend resulted in the highest recovery factor of nearly 60%, signifying significant improvement in oil recovery from carbonate formations. According to the analysis of contact angle, the binary surfactant systems did not significantly change wettability. However, this can be beneficial because it implies that the surfactant molecules are not adsorbed to the rock surface within the porous medium. Instead, they are utilized to their maximum potential within the porous medium. The findings presented in this work demonstrate that careful screening, selection, and combination of binary surfactants can effectively reduce surfactant adsorption, maintain rock wettability, and substantially lower interfacial tension in carbonate rock, ultimately aiming to enhance oil recovery. This approach paves the way for the development of innovative surfactant blends that ensure the economic viability of EOR projects, suitability for CO2 foam sequestration projects, and broad applicability in carbonate formations.

Speaker: Ayomikun Bello (Skolkovo Institute of Science and Technoloy)

14:55 Simulation of Multi-Scale Mineral Dissolution in Shale during CO2 and Acid Injection Processes

Shale reservoirs are a type of fine-grained sedimentary rock with low permeability and poor fluid flow due to the rock's compactness. The pores in these rocks are typically small, leading to low permeability of the reservoir. In order to improve pore structure and enhance fluid flow for oil and gas recovery, hydraulic fracturing is applied to shale oil reservoirs. Fracturing involves the formation and extension of cracks, allowing the release of oil or gas from the rock. Increasing the network of fractures also contributes to extending the productive life of shale oil reservoirs.
During the hydraulic fracturing in shale, various techniques such as carbon dioxide (CO2) pre-fracturing and acid fracturing are often employed in many oil fields. Injecting CO2 and the acid during fracturing can dissolve certain minerals in the formation, such as calcite and dolomite. Importantly, mineral dissolution increases the porosity and permeability of the rock, leading to significant changes in the rock's pore structure and affecting fluid flow.
In the process of mineral dissolution, the nanopore size and pore diameter in shale undergo substantial changes. As the reaction progresses, it provides a larger surface area and dissolution interface for the matrix, and the changes in pore size also influence the mass transfer process of fluids.
In order to address the issue of shale oil dissolution during CO2 injection and acid fracturing processes, and based on the characteristic multi-scale pore structure of shale, we have developed a multi-scale mineral dissolution method. The flow in identifiable pore regions is modeled using the Navier-Stokes equation, while the matrix region with given porosity and permeability parameters is solved using the Darcy-Brinkman-Stokes (DBS). Additionally, we have observed that the distribution of micro-fractures and heterogeneous mineral reactions significantly impact the dissolution patterns in the core.

Speaker: Dr Liang Zhou

14:55 Simulation of the Microscopic Three-Phase Flow Process in CO2 Miscible Flooding at the Pore Scale

CO2 flooding after water flooding can effectively improve the recovery efficiency of low-permeability reservoirs. At present, the seepage law of CO2 flooding after water flooding is generally determined through indoor core experiments and macroscopic numerical simulation methods, and simulations of the seepage process at the microscopic pore scale are lacking. Among the existing microscopic numerical simulation methods, two-phase flow simulation is generally the main focus, and multiphase flow simulation under the conditions of three-phase coexistence of oil, gas, and water is lacking. In view of the above problems, this paper conducts a microscopic numerical simulation of the CO2 flooding seepage process after water flooding based on a two-dimensional heterogeneous pore model of circular media and studies the effects of interface tension and injection velocity on the three-phase seepage process, gas breakthrough time, and gas recovery degree during the multistage miscible process. The research shows that when the interfacial tension between CO2 and oil is high, CO2 pushes water and oil forward in a piston-like manner and penetrates the water layer to contact the oil, which ultimately causes the continuous water phase to separate from the gas phase and form the main flow line of the continuous gas phase. With decreasing interfacial tension between CO2 and oil, i.e., closer to the miscible state, the gas diffuses into the water after injection and accumulates at the water-oil interface, the crude oil is displaced toward the production end, and the flow speed of CO2 is faster than that of the water phase. The lower the interfacial tension is, the shorter the gas breakthrough time at the outlet after CO2 injection. Before the miscible state of CO2 and oil, the lower the interfacial tension is, the earlier the gas channeling time, and the lower the recovery degree. After mixing, a turning point occurs. An increase in the injection velocity will advance the gas breakthrough time and gas channeling time at the outlet, leading to an increase in the gas recovery degree. This study has reference and guiding significance for understanding the three-phase flow characteristics of oil, water, and gas during CO2 miscible flooding in mines.

Speaker: Mr Jing Li (China University of Petroleum (East China))

Interpore2024-Jing Li-Reference #101.png

14:55 Simulation study of hydrogen storage in a depleted gas reservoir: Microbiological influences in porous media

Storing hydrogen in depleted gas reservoirs is a viable method for balancing seasonal energy demand fluctuations. However, these reservoirs harbor a diverse population of microorganisms. H2 are considered one of the most important electron donors for subsurface microbial respiration. Under high salinity, high temperature, and high pressure conditions, microbial reactions such as methane generation, sulfate reduction, and acetate production are most common [1]. These reactions result in hydrogen loss, gas acidification, pore plugging by metabolic biofilms, and alteration of the hydrogen-brine-rock three-phase interface properties due to the generation of organic acids [2]. Currently, there is very little research on the impact of microorganisms in depleted gas reservoirs.
This study was conducted on a specific depleted gas reservoir, utilizing the CMG-STARS to simulate the impact of microorganisms on hydrogen storage. Firstly, the diffusive distribution of solid-phase microorganisms (biofilms) on porous media was designed, and Fick's law was employed to characterize the concentration-driven microbial transport process. Subsequently, based on reaction conditions, four reactions were designed to generate CH4 (PH>7), H2S, acetic acid (PH<7), and microbial growth. The microbial population within the community was considered to control the rates of hydrogen uptake and microbial growth. The shedding of biofilms was influenced by the number of microorganisms and shear rate. Multiple sets of relative permeability curves were designed to match changes in wetting angle caused by acetic acid generation. Finally, the injection pressure was limited by reservoir fracture pressure and capillary forces causing leakage to the overlying formation. Seasonal hydrogen storage was conducted over four cycles, with a cycle consisting of 6 months of injection and 6 months of production.
The simulation results revealed the presence of high microbial saturation zones in near-wellbore region and higher parts of structure. The generated CH4 and H2S account for a maximum of 1.4% and 0.1% of the injected hydrogen volume, respectively, and accumulated below the H2 layer. The loss of hydrogen gas was highest at 5% in first cycle and decreased to a minimum of 0.6% in third cycle. As cycling period increased, the purity of hydrogen in produced gas became higher. Throughout the entire process, the effective porosity of the gas reservoir decreased by a value ranging from 0.1% to 0.5%, while the pH remained relatively unchanged.

Speaker: Zanfu Xiong (China University of Petroleum (East China))

14:55 Synergistic Effect of Hybrid Nanofluids, Low Salinity Water and Natural Surfactant on the Enhanced Oil Recovery

Hybrid enhanced oil recovery (HEOR) methods are a combination of two or more methods that could displacement more trapped oil than each stand-alone technique and cause greater improvement for the oil recovery actor. In this paper, silica and gamma alumina nanoparticles (NPs) dispersed in low salinity water with gum arabic which is a green surfactant, were applied to investigate stabilizing formulated solution. Due to the presence of divalent cations in brine, solution with nano-particles become very unstable. Solution nanofluids were prepared by dispersing gamma-alumina and silica NPs (0.1wt%) in deionized water, synthetic seawater by 2, 5 and 10 times diluted samples of synthetic seawater. Next, interfacial tension (IFT) and micromodel flooding tests were conducted for nanofluids that were stable for a longer period of time. IFT measurements revealed important role of temperature, where increase in temperature causes decrease in IFT of the injected fluid, which affects the sweep efficiency in porous media. It was found that the micromodel flooding of dispersed NPs in brine with improves the oil recovery factor, which was due to the ability of modified NPs to reduce the IFT between crude oil and injected nanofluids. Throughout micromodel flooding it was observed that, combination of the hybrid nanofluid gamma-alumina and silica with mass fraction 10:90 had the highest incremental oil recovery among the other nanofliuds. IFT analysis results indicated that, combination of the hybrid nanofluid gamma-alumina and silica with a mass fraction of 50:50 dispersed in 10 times diluted brine had the lowest value.

Speaker: Dr Seyed Mojtaba Hosseini-Nasab (School of Chemical, Oil and Gas Engineering)

14:55 The aggregated unfitted finite element method for hydro-mechanical coupling

Complex boundaries and material interfaces are common in scientific and engineering problems. When solving such problems with the standard finite element method (FEM) where the elements conform to boundaries and interfaces, analysts have to pay great efforts and patience for the meshing to avoid low-quality elements in the vicinity of boundaries and interfaces. Therefore, meshing or preprocessing is normally time-consuming and arduous for practical problems. The unfitted FEMs provide another path for the solution of problems with complex geometric domains, where a simple mesh not necessarily aligning to the physical model is employed. However, the boundaries and interfaces can cut the mesh and produce tiny cut elements, which causes ill-conditioning of the stiffness and mass matrix. The recently developed aggregated unfitted resolved the cut-induced ill-conditioning by linking the unknowns of nodes outside the physical domains to the adjacent nodes within the physical domain. It did not introduce any additional stability terms and, therefore, maintained the consistency. Hence, it is more favorable than stabilized unfitted FEM when consistency is desired.
The majority of geotechnical problems often involve complicated external boundaries and material interfaces. Therefore, the aggregated unfitted FEM is an excellent tool for analyzing geomechanics and geotechnical problems. In this paper, we develop an aggregated unfitted FEM for hydro-mechanical coupling problem, which is one of the most important problems in geomechanics. In the development of this methodology, we link both the displacement and pore pressure of nodes located outside the physical domain to the nodes inside the physical domain via extrapolation. The ill-conditioning is avoided as the small cut supports of the nodes outside the domain are precluded. Several benchmark hydro-mechanical coupling problems are solved with the proposed aggregated unfitted FEM. The numerical experiments demonstrate the optimal spatial and temporal convergence regardless of how the meshes are cut. Furthermore, the condition numbers of the stiffness matrix are dependent of the smallest cut ratio.

Speaker: Mr Fanke Wu (Lanzhou University)

14:55 The Crushing Characters of Quartz Sand Based on a New Experimental Image Processing Methods

Hydraulic fracturing has gradually increased as an important means to enhance production in deep low permeability reservoirs. Whether proppant can maintain long-term high conductivity in fractures has become a hotspot. Quartz sand has been widely used due to its affordability and easy preparation. However, the strength of quartz sand is low. Under high closure stress, quartz sand is crushed, producing fine particles that reduce fracture width and permeability of sand piles, resulting in a rapid decrease in fracture conductivity. Therefore, it is crucial to study the fragmentation law of proppants under high closure stress. For the study of the fragmentation law of quartz sand, a lot of related experiments have been conducted both domestically and internationally, and quantitative methods such as screening method and laser particle size analysis have also been formed, but there are certain limitations. In this study, a new image processing-based quantitative method is developed to determine the compression proppant crushing rate. Compared with conventional screening methods to verify accuracy, this method can more quickly and efficiently quantify the proppant crushing rate. Subsequently, a crushing experiment of quartz sand was conducted using the proposed method, and the proppant crushing rate under different conditions was calculated. The influence of factors such as sand spreading concentration, particle size combination, and sand placement method on the proppant crushing rate was analyzed. The results of this analysis were consistent with previous studies, confirming the applicability of the proposed method. This research provides a theoretical foundation for hydraulic fracturing and optimization of sand placement in order to maintain long-term high conductivity in fractures.

Speaker: liansong Wu (Southwest Petroleum University)

14:55 The impact of supercritical CO2 exposure time on the effective stress law for permeability in shale

Carbon dioxide (CO2) sequestration in shale formations is regarded as an effective approach for reducing CO2 emissions. Permeability is critical for CO2 geological sequestration as it impacts migration of CO2 in shale for mations. The effective stress coefficient for permeability (χ) scales the relative influence of pore pressure on permeability compared to confining pressure. This study examined the changes in χ of dry and wet shale samples with different times of supercritical CO2 (ScCO2) exposure. The results suggest that, as ScCO2 exposure time increases from 0 to 40 days, the χ of dry shale increases from 0.8304 to 0.9563, and that of wet shale increases from 0.8379 to 1.0134. Wet shale exhibits a greater increase in χ than dry shale for the same exposure time. These changes in χ may result from CO2-shale interaction that converts smaller-sized pores in shale into larger sized pores, based on nuclear magnetic resonance (NMR) measurements. Furthermore, the presence of water intensifies the response of shale to ScCO2, thereby enhancing this transformation. Our findings provide insights into the accurate prediction of shale permeability evolution during CO2 storage, and can assist in optimizing CO2 injection strategies as well as evaluating the potential for CO2 sequestration.

Speaker: Mr Yinming Chen (Chongqing University)

14:55 The Mechanism and Quantification of Threshold Pressure for Oil Flow in Silica Nanochannel by Molecular Simulation

Shale oil is an abundant unconventional resource in the world. However, due to the highly heterogeneous of shale reservoirs, the shale oil is difficult to flow in the porous media, resulting in the uncertainty efficiency of industrial exploration for shale oil. Threshold pressure gradient is the key property to characterize the mobility of shale oil. Usually, shale rock has abundance of pores in nanometer, and the structure is more tight than other reservoirs. It is challenging to study threshold pressure gradient for shale oil by traditional theoretical and laboratory methods in low-permeability reservoirs. In view of this, our work will quantify the threshold pressure gradient and reveal the mechanism of threshold pressure for fluids flow at nanoscale by molecular simulation. In our work, the threshold pressure of oil flow in silica nanochannel was quantified firstly by “pressure - velocity” method. The “pressure-velocity” shows the oil flow would be divided into three stages, via vibrate stage, initial stage and flow stage, showing non-Darcy flow. After that, the size of silica nanopore with 2nm, 4nm, 6nm, 8nm and 10nm, was constructed to study the size effect of threshold pressure. The calculated threshold pressure indicates that the critical pressure for oil to flow in nanopores would exponential increased with the decrease of height. When the height of nanochannel increases to 10nm, the threshold pressure was very small. Also, the height of silica nanochannel would influence the fluids properties, such as density, viscosity, etc. Due to the decrease of nanochannel, the proportion of adsorbed oil molecules in nanochannel would increase, thus influencing the viscosity and critical pressure to flow. Meanwhile, with the decreased nanochannel, the interaction between shale oil and nanochannel would increase, and more pressure are needed to make the shale oil flow. There is a highly correlation between threshold pressure and interaction energy. Intrinsically the critical pressure of oil is the energy needed to disturb or force the adsorbed oil film flow in nanochannel. Furthermore, the threshold pressure for shale oil is also related with rock types, such as quartzite, carbonate and kaolinite, etc, especially for oil in very small nanochannel. Our work provides a new insight into the shale oil flow in porous media, which is meaning for exploration of shale oil resources.

Speaker: BingBing Liu (China University of Petroleum (East China))

14:55 Two-Phase Flow Displacement Morphologies in Cohesive Granular Media

Multiphase flow in granular materials is intricate and subject to pattern formation resulting from the interplay between hydrodynamic and mechanical forces. While considerable effort has been devoted to studying systems with cohesionless grains, our understanding of the two-phase flow behavior through the cohesive counterpart held together by intergranular bonds is limited. Herein, we study the novel coupling between viscously unstable fluid-fluid displacement and bonded-grain deformation in a synthetic cohesive granular pack. We experimentally inject a low-viscosity fluid into a monolayer of cohesion-tuneable bonded glass beads that are initially saturated with a more-viscous fluid, with injection capillary numbers and cohesion levels varying among experiments. We map out a first-ever phase diagram showing displacement patterns transitioning from deformation-dominated fracturing with bond breakage to infiltration-dominated viscous fingering without grain motion as cohesion increases. Strikingly, we find that peak injection pressure exhibits a non-monotonic trend with increasing cohesiveness. The injection pressure reaches maximum when fracturing is favored against infiltration while begins to drop due to the regime transition irrespective of the increasing cohesion. Furthermore, we characterize the onset of fracturing via dimensional analysis, effectively capturing the transition based on the balance between viscous and cohesive forces. Our findings shed light on the multiphase flow behavior within cohesive materials which is fundamental in various subsurface technologies such as carbon geostorage, oil/gas recovery, and groundwater remediation.

Speaker: Mr Feihu KE (The University of Hong Kong)

14:55 Upscaled model for steady slip flow fluid structure coupling in shale system

Shale is a highly heterogeneous porous material rich in organic matter. Injecting fluid into a porous material can expand the pore space, distorting the solid skeleton. The detailed flow and mechanics of this solid deformation has not yet been systematically investigated. This work reports on modelling steady liquid flow in shale system, considering the slip effect and fluid-structure wall deformation. A microscale (pore level) fluid structure interaction (FSI) problem is formulated in terms of incompressible Newtonian fluid and a linearized elastic solid. The slip effect is adopted means of a Navier-type boundary condition. Combining different mechanical properties of organic and inorganic matter, an asymptotic solution to the FSI problem is derived for a certain geometry. A nonlinear Darcy-type upscaled equation for the averaged pressure is obtained, as well as introducing an apparent permeability dependent on interface position and slip coefficient. Based on the obtained results, relevant results for more general situations are obtained through extended analysis. The accuracy of the result is assessed by comparisons with numerical simulations. Our results may be useful for a better understanding of shale oil rocks at the micrometer scale, studying the large squeezing deformation of carbonaceous shale in practical situation or studying the deformation of other porous media.

Speaker: Dongyan Fan (China University of Petroleum (East China))

14:55 Water Impact on Adsorbed Oil Detachment from Mineral Surfaces by Supercritical CO2

Geochemical reactions are crucial for in-situ CO2 mineralization underground associated with CO2-enhanced oil recovery (CO2-EOR) in a hydrocarbon reservoir. However, the presence of formation water and adsorbed oil on rocks generates physical barriers to CO2’s access to mineral surfaces, which may yield impedance to CO2 mineral trapping that has yet to be accounted for. In this study, we mimic the dynamic oil detachment process using molecular dynamic (MD) simulations and analyzed the influence of an adsorbed oil film on supercritical CO2 (scCO2) diffusion towards the mineral surface in the presence and absence of a water phase. CO2-oil-water-rock reaction experiments are performed to substantiate the simulated data. Our results demonstrate a negative impact of water on oil film detachment by scCO2, which may give rise to a substantial delay in mineral reactions or even impede their occurrence and is unfavorable for mineralized CO2 storage underground. Carbonated water, regardless of whether it is saturated, showcases the same inhibitory effect on the miscibility of scCO2 and oil, thereby restraining oil film detachment and the contact of CO2 with the rock surface.

Speaker: Ms Rui Gao (China University of Petroleum (Beijing)))

14:55 Wave Velocity Dispersion and Attenuation in Partially Saturated Porous Media

The understanding of the seismic signature of the partially saturated formation is critical to seismic monitoring in the hydrogen geo-storage, CO2 geo-sequestration and geophysical survey and exploration of oil and gas reservoir. The main objective of this study is to model the wave propagation in partially saturated rocks containing two immiscible fluids (i.e., gas-water), with a comparative case study on hydrogen (H2), methane (CH4), nitrogen (N2) and carbon dioxide (CO2) bearing rocks. The sonic velocities and the attenuations are influenced by several parameters, which interact in a complex pattern, particularly when the rock is saturated with multiple fluids. We developed a rock physics model that considers the effects of patchy saturation, wettability, effective pressure, and relative permeability. By examining wave propagation in each fluid-saturated case against water saturation, we improve our understanding of changes in sonic velocity and attenuation during the water saturation varies. This provides valuable insights for seismic and sonic monitoring during the injection and extraction of gas in the reservoir formation.

Speaker: Dr Jimmy Xuekai Li (The University of Queensland)

14:55 Wettability effect on pore-filling events for two-phase flow

The abrupt variations in the channel's cross-section of the porous media bring about the challenge of accurately describing the pressure change during two-phase flow. To better understand the effect of the variations, we designed hydrophobic PDMS micro-models with an 800×800 μm2 single square pore body and conducted a series of experiments of drainage processes of two-phase flow. The fluorescent-dyed water and Fluorinert-FC 43 were utilized to run the drainage processes by acting as a non-wetting and wetting phase. One confocal laser scanning microscopy (CLSM) was applied for tracking two-phase interface movement in the fluorescent images with a high optical resolution of 2.5 µm/pixel. We inserted two pressure-sensitive transducers to dynamically measuring the pressure difference between inlet and outlet reservoirs. For gaining insights on the interface behavior, we present the analytical solutions for the two-phase flow in a rectangular microchannel and precisely described the variable velocity and pressure in the diverging zone of the square pore body. These solutions allow us to correct the syringe pump problem and obtain a more reliable description of velocity and pressure profiles versus injection time. Correspondingly, numerical modelling was carried out to investigate the interface behavior by applying the phase-field and volume of fluid (VOF) methods. Constant and variable velocities were respectively endowed to the inlet boundary of the simulation domain. The validation of the simulation has been done with the analytical solutions and experimental data of pressure profiles. Both computational methods reveal that giving variable velocity to the inlet boundary offers a better agreement with the experimental results of interface behavior inside a single square pore.

Speaker: Dr Lifei Yan (Delft University of Technology)

17:00 → 18:00 MS01: 1.3

17:00 Solar energy storage in saline aquifers: Insights from coupled hydro-thermo-mechanical modeling

The utilization of saline aquifer for solar energy storage is recognized as a promising solution to address the spatial and temporal mismatch between energy demand and supply. This approach holds significant potential for future renewable energy storage and conversion. Thermal energy storage in saline aquifer can effectively transform intermittent solar energy into stable geothermal energy at high temperatures. In this study, we examine a previously proposed solar energy storage and conversion system. This system entails the initial conversion of solar energy into heat through parabolic troughs, followed by the storage of thermal energy in a saline aquifer facilitated by high-temperature hot water circulation. Currently, the impact of poroelasticity and thermal stress induced by high-temperature hot water injection on injectivity and heat storage efficiency remains unclear. In this study, three-dimensional porosity and permeability fields for typical saline aquifers are generated by geostatistical modelling. The circulation of high-temperature hot water in the aquifer by doublet vertical well system is explored through coupled hydro-thermo-mechanical modeling. We analyze the effects of poroelasticity and thermal stress on the injectivity of hot water. The influences of in-situ stress and permeability heterogeneity on spatial and temporal evolution of hot water zone are then explored. In addition, the efficiency of solar energy storage in various heterogeneous saline aquifer is evaluated and compared. Considering the hydro-thermo-mechanical coupling effects, saline aquifers conducive to solar energy storage are identified. This study enhances our understanding of the mechanisms involved in solar energy storage in saline aquifers, providing crucial insights for its practical implementation.

Speaker: Mr Kunpeng Zhong (Chengdu University of Technology)

17:15 Towards an open-source digital twin for subsurface geothermal systems: a proof-of-concept study for a doublet system

Geothermal energy can provide clean and sustainable baseload energy for heating, cooling, and power. The injected working fluid undergoes flow and heat transfer within the surrounding porous rocks during the geothermal reservoir extraction. The geological complexity and lack of data require digital technology like computer simulation to assist in the optimization and decision-making of operation strategies. A digital twin denotes a virtual representation of a physical product, process or facility, and is used to understand and predict the physical counterpart’s performance. A digital twin for geothermal production can help to mitigate operational risks, reduce maintenance costs, extend reservoir longevity, and enhance overall sustainability of a geothermal resource.
We propose a workflow for an open-source digital twin for geothermal energy that contains the following elements: a) Well logs and seismic data are utilized to design multiple reservoir models that capture possible geological scenarios using the Rapid Reservoir Modeling (RRM) software. RRM is a sketch-based modelling software that allows users to rapidly sketch geologically consistent models in 3D. b) Possible property distributions will be assigned to geological domains to capture uncertainty in the petrophysical data. c) The Delft Advanced Research Terra Simulator (DARTS) is combined with machine learning techniques to create proxy models that enable fast simulations. d) As new production and monitoring data becomes available, data assimilation techniques like Ensemble Smoother with Multiple Data Assimilation (ESMDA) are applied to update property distributions for each scenario. This iterative process of data assimilation will help users constrain geological and production uncertainties, both of which are key to optimizing operational strategies.
We demonstrate the digital twin framework using a proof-of-concept study of a low-enthalpy geothermal system located in a channelized fluvial reservoir. Heat is produced from a geothermal doublet. The geological scenarios were designed using RRM. These models consider key uncertainties, such as Net to Gross, sinuosity of the channels, paleo flow direction, and the distribution of porosity and permeability within the geological domains. One of the RRM models was chosen to be the “truth case” for which synthetic production data (well temperatures and pressures) and dynamic data along the wells were simulated using DARTS. Each individual RRM model adheres to the well constraints “observed” for the truth model. DARTS was applied to rapidly predict production performance for each scenario, and these data can subsequently serve as the training set to obtain the proxy model. Both machine learning and ESMDA will be performed to reduce the difference between the prediction and observation of truth case to update reservoir properties.
The outcomes of this proof-of-concept study demonstrate the feasibility of the digital twin framework for geothermal systems. A broader range of monitoring data in the reservoir and transient data will be included in the future to enhance the performance of the digital twin in geothermal energy applications.

Speaker: Dr Guofeng Song (Delft University of Technology)

17:30 Insight on the stability of gas hydrate in montmorillonite slits by molecular dynamics simulations

The extent of interactions between clay surfaces and water molecules and their impact on hydrate stability in clay reservoirs have been a source of debate. This uncertainty arises from the inherent challenges associated with the nanoscale temporal and spatial detection of bound water molecule distribution characteristics. This study employs molecular dynamics simulations to investigate the stability of methane hydrates in montmorillonite slits at various temperatures, focusing on the surface influence scale, bound water molecule distribution characteristics, and binding strength. The results show that hydrates in close proximity to the clay surface exhibit lower stability and are more prone to decomposition. The hydrophilic nature of the surface leads to water molecule aggregation at the interface, driving methane molecules away during decomposition. Additionally, compared to the charged tetrahedral layer surface of montmorillonite, the quasi-liquid layer on the neutral tetrahedral layer surface is thinner, with semicage structures persisting within the vacancies of the Si-O rings. The analysis suggests that variations in the range of surface influence and binding strength can be primarily attributed to intermolecular Coulomb interactions and charge redistribution at the interface. These research findings offer valuable molecular insights into the microscopic characteristics and behavior of hydrates within clay slits.

Speaker: Dr Jie Chen (China University of Petroleum (East China))

17:45 Microfluidic Study of Formation, Dissociation, and Dissolution Dynamics of Gas Hydrates in Porous Media

Gas hydrates are crystalline solids in which guest molecules are trapped within cages formed by water molecules at high pressure and low temperature. These solids have important applications in natural gas hydrate exploration, CO2 or H2 storage, water desalination, gas separation, and gas/oil transportation. Natural methane (CH4) hydrates are abundant in the seabed sediments and are potential sources for future energy harvesting[1]. On the other hand, carbon dioxide (CO2) hydrates are promising forms of CO2 sequestration due to the large storage capacity. The phase transition of hydrates and the transport behaviors of the relevant gas and liquid phases in porous media are crucial to CH4 production and CO2 storage using hydrates. Therefore, many studies have been conducted on investigating the dynamics of formation, and dissociation of CH4 and CO2 hydrates in porous media using sand or glass bead packs with the help of in-situ imaging methods such as X-ray synchrotron tomography and magnetic resonance imaging (MRI) technology. In this work, we developed a low-temperature and high-pressure microfluidic system for gas hydrate study, allowing for in-situ imaging of the phase transition of hydrates under realistic reservoir conditions of deep seabeds. We studied the formation, dissociation, and dissolution mechanisms of CH4 and CO2 hydrates in both pore scale and chip scale. The hydrates were generated in pure water at 10 MPa and 5 oC subcooling temperature. The dissociation of these two hydrates was induced by decreasing pressure and increasing temperature, respectively. During hydrate formation, we observed the nucleation and propagation of hydrates from the gas-liquid interfaces into the bulk gas, showing various morphologies at the pore scale. The growing kinetics were calculated by analyzing the optical images obtained by a high-resolution camera. Further, we successfully captured the crustal fingering of CH4 gas encased by CH4 hydrates due to the local pressure gradient [2]. From the chip scale, the location of hydrate formation and its propagation in the porous media is stochastic. We found that the induction time for hydrate formation is also stochastic, and the nucleation of hydrate should be triggered by external stimuli such as flow and pressure[3]. During hydrate dissociation, the hydrates remained stable until the pressure or temperature exceeded equilibrium. Then, a drastic transition of hydrates into gases occurs, which results in the fast displacement of gas with liquid in the porous media. In addition, the reformation of hydrates was observed during hydrate dissociation. Finally, we studied the dissolution of CH4 hydrate in undersaturated water and revealed the formation, dissolution, exsolution, and reformation mechanisms of gas hydrates in porous media.

Speaker: Wei Yu (King Fahd University of Petroleum and Minerals)

17:00 → 18:00 MS03: 1.3

17:00 An Efficient Numerical simulation of Reactive Flow in Fractured Vuggy Carbonate Reservoirs Considering Hydro-Mechanical coupling effects

Fractured vuggy carbonate reservoirs are one of the most important reserves in the world, which hold great importance for increasing reserves and production. However, fractured vuggy reservoir has greatly different reservoir space and flow patterns challenging low recovery. Three types of reservoir space, including matrix pores, fractures, and vugs, coexist with strong heterogeneity, and the spatial distribution scale varies from millimeter to the meter. Acidizing is a vital stimulation technique to boost production in deep fractured vuggy carbonate reservoirs since it can effectively enhance the connectivity of fractures and vugs. The real-time dynamic alterations in the volume of matrix pores, fractures, and vugs during acidification, coupled with changes in reservoir in-situ stress, signifies a multi-field coupled problem. Currently, research on hydrological-mechanical coupling processes throughout reactive flow in porous media is restricted to single-pore and fracture models, with little consideration given to the influence of pore, fracture, and vug deformation on reactive flow. This paper puts forth a set of mathematical models and numerical simulation techniques for analyzing reactive flow in fractured vuggy carbonate reservoirs while accounting for hydro-mechanical coupling effects. Validation of the model and method is achieved through a numerical example. The results show that fractures and vugs are leading in acid flow through the medium during the acidification of fractured vuggy media. Under stress conditions, fracture closure exhibits the most substantial impact on acid flow in the fracture, followed by vug deformation. Acid fluid preferentially flows via dominant channels connected by fractures and vugs, dissolving the rock.

Speaker: Kang Liu (中国石油大学（华东）)

17:15 Characteristics of CO2 Dissolution in Fractured Saline Aquifers

Dissolution of CO2 in brine, one of the key mechanisms for securely storing CO2 in the subsurface, involves diffusion of CO2 into the brine and subsequent buoyancy-driven convective migration. The stable stratification along the CO2-brine interface, predominated by diffusion, stimulates the density-driven convection, resulting in an enhanced dissolution rate. In fractured porous media, the complex geometry increases the uncertainty of CO2-plume migration. Predicting the characteristics of CO2 dissolution into the resident brine in fractured saline aquifers is important to understand the potential for long-term storage. In this work, a discrete fracture-matrix model (DFM), where fractures are explicitly characterized in the model with individual grid cells, is adopted to describe the geometry of the fractured saline aquifer. We first carry out a sensitivity study to obtain a reasonable resolution of grid discretization which can capture both the fast convective flow and converged dissolution rate with fractures. Based on the selected resolution, the properties of fractures, e.g., the permeability and aperture of fractures, are investigated to confirm their impacts on density-driven convection within an individual-fracture model. In addition, an aquifer containing a complicated fracture network that includes highly intersected/dead-end fractures is used to highlight the effects of fractures on the interactions between gravity currents and convective dissolution. Our simulation results demonstrate that due to a low porosity/permeability matrix, CO2 dissolution is driven by diffusive/convection transport along the CO2-brine interface, while the density-driven convection is very weak, i.e., relatively long onset time with a small Rayleigh number. The directions of fractures play a critical role in the convective behavior of CO2-enriched brine. The fracture network enhances CO2 dissolution compared to the case of an aquifer containing isolated fractures, i.e., no connections among fractures. These estimates of the dissolution rate with fractures show that the geometry of fractures plays an important role in enhancing storage security.

Speaker: Dr Xiaocong Lyu (China University of Petroleum (Beijing))

17:30 A new model for predicting conductivity under nonlinear fracture closure and proppant crushing grading curve evolution

To solve the problem of rapid decline in conductivity of sand filled fractures in deep shale, based on the mechanical process of compression and deformation of proppant pile, the constitutive equation of deformation and fracture of proppant pile was established, and the transfer matrix of gradation curve after fracture of proppant pile was established based on fractal theory. Combined with KC equation, the equivalent particle size and permeability evolution equation of sand pile under multi-particle fracture were deduced. Finally, a new model for predicting the conductivity of proppant embedment deformation and fracture is obtained. The new model is compared with the results of fracture width deformation experiment, sand pile permeability experiment and multi-particle size combination conductivity experiment, which proves the correctness of the model. The results show that the change of net closing pressure will change the fracture width and permeability, and thus change the fracture conductivity. The dominant factor of the change of conductivity is the net closing pressure, and the greater the net closing pressure, the smaller the conductivity. The main factor affecting the change rate of fracture width is the apparent elastic modulus of proppant pile. The larger the apparent elastic modulus is, the larger the fracture width is. The main factor affecting the change rate of fracture permeability is the fracture degree of proppant pile. The larger the fracture degree is, the smaller the permeability is. The larger the combination ratio of large particle size, the higher the conductivity. Therefore, the development of proppants with high apparent elastic modulus and low degree of breakage is of great importance to improve the conductivity. At the same time, this model also improves the theoretical guidance for proppant particle size combination selection, which is helpful to the optimization design of field construction.

Speaker: liansong Wu (西南石油大学)

17:45 Impact of corner-bridge flow on capillary pressure curve

The capillary pressure curve is essential for predicting multiphase flow processes in geological systems. At low saturations, wetting films form and become important, but how wetting films control this curve remains inadequately understood. In this study, we combine microfluidic experiments with pore-network modeling to investigate the impact of corner-bridge flow on the capillary pressure curve in porous media. Using a CMOS camera and a confocal laser scanning microscopy, we directly observe the corner-bridge flow under quasi-static drainage displacement, revealing that corner-bridge flow serves as an additional flow path to drain trapped water. Consequently, the capillary pressure curve shifts towards lower saturations, resulting in a reduced water residual saturation. We establish a theoretical criterion for the occurrence of corner-bridge flow and develop a pore-network model to simulate quasi-static drainage, taking into account this additional flow path. Pore-network modeling results agree well with our experimental observation. On this basis, we employ our pore-network model to systematically analyze the impact of corner-bridge flow on capillary pressure curve across varying porosity, pore-scale disorder, and system size. Results indicate that the impact of corner-bridge flow becomes more pronounced as porosity decreases and shape factor increases. Our findings demonstrate that the maximum decrease of water residual saturation is 0.19 when porosity is at its minimum, and the shape factor is at its maximum. This work bridges the gap between the pore-scale mechanism and capillary pressure behavior and has significant implications for estimating the amount of extractable water and the CO2 storage capacity.

Speaker: Dr Tian Lan (Wuhan university)

17:00 → 18:00 MS06-B: 1.3

17:00 Interface Evolution During Pore Water Evaporation in Micromodels

The interface between liquid and vapor phases within porous media plays a pivotal role in enhanced vapor diffusion and water evaporation. The liquid-vapor interfaces can be classified into internal interfaces (pertaining to vapor diffusion) and external interfaces (associated with phase change) based on their distinct mechanisms. However, the intricate geometric and topological complexities within these interfaces pose challenges in discerning between their internal and external manifestations, hindering a comprehensive understanding of heat and mass transfer mechanisms within soil pores. In this study, a meticulously engineered Hele-Shaw cell integrated with patterned micropillars offers an innovative approach for comparing interface evolution in pores with diverse patterns. A sophisticated image-processing analysis was employed to accurately compute the evaporation rate of the pore water from the micromodels. Equivalent lengths were obtained to determine interface areas at distinct time intervals. Comparison of the continuous recession of the liquid-vapor interface in a stable micropillar pattern to the air-entry of the internal interface and pinned external interface in an unstable micropillar pattern provides an approach to quantitatively separate the internal and external interfacial evaporation rates. Furthermore, employing image processing during evaporation enables the calculation of both global and local interface curvatures. Consequently, a correlation between the characteristic curvature radius and the averaged interfacial evaporation rate was established, consistent with prior experimental findings documented in the literature. The distinction between internal and external evaporation rates offers a fresh perspective, shedding light on the mechanisms that drive enhanced evaporation and diffusion within porous media.

Speaker: Yi Dong

17:15 Evaporation in porous media with salt precipitation

Visualization experiments are performed to disclose the salt precipitation and gas-liquid displacement in microfluidic pore networks during evaporation. Two forms of salt precipitation are revealed: aggregated polycrystalline structures and large bulk crystals. It is found that gas bubbles can be formed because of imbibition of liquid into aggregated polycrystalline structures. The length of a corner liquid film can affect the direction of growth of the aggregated polycrystalline structures connected to the corner liquid film. Discontinuous corner liquid films can be transformed to continuous ones when they are touched by growing aggregated polycrystalline structures. The "sleeping" aggregated polycrystalline structures at the open surface of a microfluidic pore network, i.e. efflorescence, can grow again if they are touched by growing aggregated polycrystalline structures inside the microfluidic pore network, i.e. subflorescence. Because of efflorescence, the evaporation rate from a microfluidic pore network can increase first and then decrease. In addtion, the distribution of the precipitated salts also depends on the thermal gradient along the microfluid pore networks.

Speaker: Dr Rui Wu (Shanghai Jiao Tong University)

17:30 Interfacial tension reduction mechanism by nanoparticles at heavy oil-carbonized water interface from molecular dynamics approaches

Nanoparticle-enhanced carbonated water (NP-enhanced CW) is a novel and promising injection agent for coupled enhanced heavy oil (HO) recovery and CO2 storage. The main objective of this study is to investigate the interfacial tension reduction mechanism by nanoparticles (NPs) at HO-CW interface from molecular dynamics approaches. The influences of NPs on the Interfacial tension of HO-CW systems under reservoir conditions were studied. In addition, the influences of NP type, NP concentration, CO2 concentration, pressure, and temperature were investigated and the enhanced oil recovery mechanisms of nanoparticle-enhanced CW were also discussed. The results revealed that the ability of the five NPs to reduce the IFT of the HO-CW systems was as follows: SiO2 NPs > Al2O3 NPs > TiO2 NPs > Fe NPs > CuO NPs. The interfacial tension value of the HO-CW system decreased by 39.69 % due to the presence of SiO2 NPs. An optimal NP concentration existed to decrease the interfacial tension of the HO-CW systems. The interfacial tension values of the HO-CW systems in the presence of SiO2 NPs decreased with increasing the CO2 concentration, temperature, and pressure. This study is helpful in deeply understanding the microscopic mechanisms of NPs affecting the interfacial tension of HO-CW systems during the injection processes of NP-enhanced CW. The results also provide a valuable reference for the injection of the NP-enhanced CW as a new technology to enhance HO recovery and underground storage of CO2.

Speaker: Xiaofei Sun (China University of Petroleum (East China))

17:45 Thermodynamics and Morphology of Ganglia in 2D Heterogeneous Porous Media

Ganglia (bubbles, or droplets) are widespread in porous media of various industrial applications. Thermodynamic properties of a ganglion, including its volume ($V$), surface free energy ($F$), and capillary pressure ($P_{c}$), play pivotal roles in determining its transport and reactive performance. Although these properties in homogeneous porous media have been recently resolved [1, 2], quantitatively description of ganglia in heterogeneous media remains a challenge [3-5].

In this study, we develop a pore-scale algorithm for determining the morphologies and thermodynamic properties of hydrostatic ganglia in heterogeneous porous media (a 2D pillar array, as illustrated in Figure 1a). Notably, we reveal novel ganglion morphologies: the fluid-fluid interface can emerge between non-adjacent solid particles that do not share a pore unit (referred to as the “cross-pore interface”), although it has long been assumed that a pore is a basic unit of fluid and interface behaviors in porous media [2]. The presence of cross-pore interfaces is strongly associated with the pore-throat ratio: a smaller pore-throat ratio (wider throat) leads to a greater number of metastable morphologies. Interestingly, these novel cross-pore interfaces can also be found in homogeneous media.

We track cycles of quasi-static growth and shrinkage of a ganglion (Figure 1b) and resolve the corresponding thermodynamic properties’ evolution (Figure 1c&d). During growth, the ganglion invades pore by pore, with only one major length scale (the throat) controlling $P_{c}$. In contrast, during shrinkage, the boundary of the ganglion in different pores contracts cooperatively, exhibiting multiple scales of $P_{c}$ during different stages of ganglion shrinkage. In addition, although the $F-V$ correlations of both growing and shrinking ganglia are statistically linear, the surface free energy ($F$) of a shrinking ganglion is, in most cases, higher than that of a growing ganglion at the same $V$.

This work provides insights for investigating quasi-static degassing, ganglia dissolution, and ripening processes, as well as to analyze the thermodynamic stability of dispersed fluid clusters in heterogeneous porous media. In addition, we call for attention that the term “pore” may not always be a valid basic representative unit during the description of fluid and interface behaviors in porous media, as demonstrated by the presence of cross-pore interfaces.

Speaker: Chuanxi Wang (Peking University)

17:00 → 18:00 MS08: 1.3

17:00 Dissolution patterns and permeability evolution in dissolving fracture under mechanical deformation

Fractured rock is widely present in the crust of the Earth and provides main permeable pathways. Mineral dissolution due to reactive fluid flows would enlarge the fracture aperture, and lead to different dissolution patterns and increase the permeability. However, normal stresses would cause mechanical deformation of the fracture and pressure dissolution of contacting asperities, which can further lead to fracture closure and reduced permeability. Here, we systematically study fracture dissolution processes at different normal stresses to reveal the conditions under which fracture permeability increases or decreases. First, we develop a computational model incorporating mechanical deformation, chemical reaction at the free-fracture surfaces and pressure dissolution at contacting asperities, subsequently validating it through experiments. Comparison to existing experiment demonstrate the ability of the computational model to simulate fracture dissolution under normal stress $\sigma$. Then we use the computational model to simulate more than 300 fracture dissolution processes with a wide range of Peclet number $Pe$, second Damkohler number $Da_Ⅱ$, normal stress $\sigma$ and fracture length $L$. We elucidate the underlying mechanisms of different dissolution modes and their permeability evolution. We establish theoretical predictions for transitions of dissolution patterns: $Da_{eff}$ (effective Damkohler number) predicts the transition from wormhole to uniform dissolution; $\Lambda^{-1}$ (thickness ratio of reaction front) predicts the transition from compact to wormhole dissolution. We further develop theoretical predictions for the increase or decrease in fracture permeability under normal stress. There are two conditions under which decrease in fracture permeability occurs: (a) 1/$Da_{eff}$>2 and $a_{eff}$>1; (b) $\Lambda^{-1}$<32 and $a_{eff}$>1, where $a_{eff}$ is effective activity of solid. In all other cases, fracture permeability will increase. This work improves our understanding of fracture dissolution under mechanical deformation and pressure dissolution and is important for many subsurface engineering applications.

Speaker: Kai Li

17:15 A mechanistic investigation of oscillatory zoning using reactive transport modeling

Solid solutions are widely studied because their formation is ubiquitous in natural and anthropogenic systems. Co-precipitation in rock matrix can result in oscillatory zonation phenomena with solid solutions exhibiting compositional variations (e.g., plagioclase). The principle of co-precipitation of sulphate solid solution is relevant for wastewater treatment of produced waters from hydraulic fracturing and oil/gas extraction, for removing contaminant in uranium mines etc. For nuclear waste disposal, the formation of solid solutions is considered as an important retention mechanism for 226Ra. Despite the widespread occurrence of solid solutions and well-established thermodynamic models, their formation in rock matrix and the effects of transport and kinetics are poorly understood. Previous microfluidic experiments of diffusion-controlled precipitation showed patterns of oscillatory zoning of solid solution crystals of (Ba,Sr)SO4 [1]. In this study, reactive transport modeling is performed to provide a mechanistic understanding of the oscillatory zoning behavior. A micro-continuum approach based reactive transport model that considers probabilistic nucleation was used to simulate the precipitation of (Ba,Sr)SO4 solid solutions following the experimental geometry and setup [2]. It enabled us to compare the contributions of physical-chemical processes that include species-specific diffusion at the solid-fluid interface, solubilities, nucleation kinetics and crystal growth. The models have highlighted that reaction kinetics, rather than transport, are more important in shaping the oscillatory zoning phenomena.

1. Poonoosamy, J., et al., A lab-on-a-chip approach integrating in-situ characterization and reactive transport modelling diagnostics to unravel (Ba,Sr)SO4 oscillatory zoning. Scientific Reports, 2021. 11(1): p. 23678.
2. Deng, H., J. Poonoosamy, and S. Molins, A reactive transport modeling perspective on the dynamics of interface-coupled dissolution-precipitation. Applied Geochemistry, 2022. 137: p. 105207.

Speaker: Dr Hang Deng (Peking University)

17:30 Quantifying dissolution dynamics in porous media using a spatial flow focusing profile

Dissolution processes in porous media produce a diverse range of patterns, depending on the relations between flow, diffusion, and reaction rates. Determining the dissolution regimes is critical for controlling contaminant migration, preventing CO2 leakage during geological carbon sequestration, or assessing the long-term stability of hydraulic structures. In all of these cases, the emergence of highly efficient flow paths within rock can dramatically alter its transport properties. To distinguish between these regimes, we analyze a spatial flow focusing profile based on the focusing index developed by Jang (2011). We segment the medium into cross sections along the flow direction and calculate the flow focusing index for each of them. Consequently, we obtain a profile which is a function of distance from the inlet. Through the analysis of this profile and its temporal changes, we observe various types of evolution, such as a front of increased flow focusing progressing from the inlet in the wormholing regime or a decrease in focusing along the entire medium in the uniform regime.

We employ this measure in numerical simulations of a dissolving porous medium using a pore-network model. In this approach, we treat the porous medium as a system of interconnected pipes (Budek, 2012) with the diameter of each segment increasing in proportion to the local reactant consumption. By modifying flow and reaction rates in the simulations, we obtain a phase space diagram displaying a variety of dissolution patterns, which we characterize using our quantitative flow focusing measure. Through this analysis, we identify the elusive channeling regime (Menke, 2023). To generalize our findings, we investigate the impact of network heterogeneity on the emerging flow patterns by varying its magnitude and spatial correlation. The findings elucidate the key parameters that determine the dissolution regimes.

Speaker: Tomasz Szawełło (University of Warsaw)

17:45 Dynamics of contaminant flow through porous media containing biochar adsorbers

Biochar is used as an additive in green roof soil substrates to aid in the regulation of fertilizer storage and dispersal, preventing unwanted runoff of the chemicals. The evolution of contaminant transport and adsorption by biochar added to a packed bed is analyzed using experiments and simulations. Experiment 1 is used to determine the equilibrium capacity and adsorption rate of two types of biochar when immersed in a methylene blue solution. Experiment 2 determines the breakthrough curves of a packed bed of glass beads with randomly interspersed biochar as a methylene blue solution is circulated. Simulations are run using the properties extracted from experiment 1 and the results are compared with experiment 2. An analytical model is proposed and utilized to mimic the behavior of biochar reaching equilibrium, unable to remove additional solute. Monodisperse beds are superior in the removal of solute but removal efficiency is heavily related to the surface area of the reactive particles and the rate at which they become unable to remove additional solute. The cases using the analytical model display a tight distribution of particle surface concentration at times after the solution front passing, indicating full immersion in the solution and therefore maximum removal efficiency. In comparison, the cases with constant reactivity display a much wider distribution of surface concentrations, indicating uneven exposure. The polydisperse beds create more channeling effects which reduce reactive particle efficiency and lead to higher breakthrough concentration profiles. Comparison between experiments and simulations show good agreement with breakthrough curves.

Speaker: Dr Kaj Pettersson (Chalmers University of Technology)

17:00 → 18:00 MS09: 1.3

17:00 Multiscale Generalized Network Modeling of Carbonates with Sub-Resolution Porosity

With advances in digital rock physics, pore-scale numerical methods have been developed to estimate various petrophysical parameters based on 3D micro-CT images. However, currently pore-scale models mostly rely on segmented dry scan of the rock sample for network extraction, and the resulting network consists only of resolved pores and throats. For complex rocks such as carbonates that encompass multiple length scales, capturing pores at every scale is often not possible due to the size-resolution trade-off. In this study, we develop a multiscale generalized network model (GNM) by including sub-resolution porosity as another throat type, called micro-links, and modify the flow model by including flow through micro-links. In single-scale GNM, resolved throats are the main pore elements in the network and are divided into corners by certain discretization levels. GNM has several benefits, such as realistic representation of the pore space with the effect of throats expanding from throat center to neighboring pore centers and detailed corner description (Raeini et al. 2017). Moreover, GNM improves the physical accuracy of model predictions by formulating the 3D interfacial curvature between two phases not only in the axial plane but also in the sagittal plane (Raeini et al. 2018; Giudici et al. 2023). We employ differential imaging of brine and dry scans to characterize connectivity and quantify unresolved porosity. We obtain a porosity map containing all voxels with their sub-resolution porosities. Using the dilation algorithm developed by Foroughi et al. (2023), each microporous voxel is labeled according to its two closest pores, and then microporous voxels with the same closest pores are classified as a micro-link. Since we consider micro-links as continuous Darcy-like porous media, we use classical empirical relationships to describe flow in micro-links. We first tested our multiscale model with highly permeable Ketton limestone. We tuned our model to mimic the reported Ketton mercury injection capillary pressure (MICP) data, which exhibited a bimodal throat size distribution, one peak at larger pores is attributed to interparticle resolved pores large enough to be captured at micro-CT voxel size, and the peak at small pore size is for intraparticle micropores. And in between, there is an intermediate interval covering unresolved macropores, which are larger than micropores but are under resolution. To achieve a good match with the MICP curve, we determine the critical micro-link porosity as the boundary between different porosity regions and evaluate their saturation exponent and grain diameter values separately. After calibrating the model with measured permeability, formation factor, and MICP data, we generate a bimodal capillary pressure curve for oil drainage into initially water-wet system. Even in the early stages of drainage, we observe an increase in the relative permeability of water, contributed by unresolved porosity. In summary, our approach shows significant promise in addressing sub-resolution porosity in a less computationally costly manner using micro-links. We aim to extend our approach to other complex multiscale systems, including fuel cells, membranes, and batteries.

Speaker: Branko Bijeljic (Imperial College)

17:15 The interplay between temperature evolution, species distribution, and microstructure dynamic in a calcining porous particle

Reacting particle systems play a crucial role in various industrial applications, with limestone calcination serving as a prime example. In this process, applying high-energy input to calcium carbonate (CaCO$_3$) particles results in the production of active lime solid (calcium oxide CaO) and the by-product carbon dioxide (CO$_2$) gas. The legal obligation to mitigate CO$_2$ emissions has a notable impact on production costs, emphasizing the need for a thorough understanding of the calcination process. Such an understanding can enhance conversion process efficiency and enable the achievement of desired CaO structures, crucial for high efficiency in CO$_2$ adsorption. This study introduces a pore network model to explore the interplay between intraparticle heat and mass transfer, pore structure changes during chemical reactions, and their interactions with the surrounding fluid-solid environment in a single particle. The pore space and solid skeleton of the particle are approximated as regular-lattice networks, incorporating cylindrical pores and volume-less nodes. Local reaction rates are determined based on the effective specific surface area and local CO$_2$ pressure. Thermal energy is supplied through hot gas flow convection at the network's surface. Solid element dimensions and corresponding pore structures are updated during each time step, enabling the tracking of temperature evolution, local conversion, and void space structure changes within the particle. Simulation results reveal that when the bulk gas has initially low CO$_2$ pressure, calcination extends beyond the particle surface and occurs within the particle. As a result, the released CO$_2$ becomes trapped due to internal mass transfer resistance, impeding further calcination. On the contrary, exposure to high initial CO2 pressure exclusively promotes local calcination reactions at the particle's surface. The initial bulk CO$_2$ pressure also has a notable impact on the final structure of CaO. This intricate interplay in calcination, as demonstrated by the simulations, provides valuable insights for a better understanding and optimization of industrial processes, applicable not only to calcination but also to other heterogenous reactive systems.

Acknowledgement

Funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) – Project-ID 422037413 – TRR 287.

Speaker: Xiang Lu

17:30 Quantification of geometric and flow characteristics for CO2 storage at pore-scale using a DC-GAN based digital experiment approach

The trapping efficiency of CO2 storage in porous subsurface is influenced by various geometric and flow characteristics. Conducting experimental studies on reservoir structure characteristic parameters and actual storage efficiency consumes a significant amount of resources, making it difficult to analyze the uncertainty of parameters through a large number of experiments. In this work, a deep convolutional generative adversarial network (DC-GAN) was employed to generate 1000 sets of images that are visually indistinguishable by using tomographic images of Bentheimer sandstone as the training data. This is followed by performing image analysis and pore network modelling to obtain geometric (e.g. Minkowski functionals) and flow (absolute and relative permeability, capillary pressure, saturation, and trapping efficiency) properties. With maximum capillary of 7.0 KPa, we found that the trapping efficiency ranged from 32% to 40%. We then explored the uncertainty of all geometric and flow characteristics to determine the minimum number of digital experiments to reproduce the same statics. This work proposes a strategy for coupling deep learning method and pore network models to conduct a large number of digital experiments on complex porous media. This can be used to correct experimental errors obtained through traditional experimental methods and guide the design of geological CO2 storage systems.

Speaker: Ms Yifan Zhang (Zhejiang University)

17:45 The numerical simulation of two-phase flow in multi-mineral shale digital rock cores

Shale oil and gas resources are widely distributed and have abundant reserves in China, with broad development prospects and potential. Due to the inherent characteristics of shale oil, such as the large number of nanometer-sized pores with complex pore structures, significant fluid-wall effects, complex mineral compositions, abundant organic matter, and complex and diverse wettability, the flow law of multiphase flow under shale reservoir conditions differs significantly from conventional reservoirs. Therefore, it is essential to characterize the flow of multiphase flow under shale pore scales, considering TOC content, complex wettability, and adsorption conditions. In this work, a new method for simulating the pore scale of shale oil-water two-phase flow based on mixed multi-mineral phase digital cores is proposed. This method is based on identifying the pore wall surfaces of each mineral and considering the corresponding adsorption and wettability conditions. Firstly, the multi-mineral phase shale digital core is reconstructed from the two-dimensional scanning electron microscope image of the shale sample, and the pore space of the corresponding minerals is divided by grids. Secondly, based on the Navier-Stokes equation, considering the TOC content, complex wettability conditions, and adsorption layer, the VOF method is used to simulate the shale oil-water two-phase flow process at the pore scale. Finally, the influence of TOC content, complex wettability, and adsorption on the shale oil-water two-phase flow is analyzed. The results have shown that the effects of TOC content, complex wettability, and adsorption on shale oil-water two-phase flow cannot be ignored. As the TOC content increases, the contact area between the organic pore walls and oil and water also expands. The flow of the water phase is hindered by the oil-wet organic pore walls, which significantly reduces the movable degree of oil. The movable degree of oil is also influenced by the organic matter distribution. In addition, the change in wettability of shale pore walls can also affect the flow of oil and water phases in shale. With the stronger oil-wetness of shale pore walls, especially organic pore walls, the movable degree of oil decreases. Due to the narrow pore radius and strong fluid-wall interaction, the adsorption phenomenon is significant, causing oil to remain on the pore surface, thus, greatly reducing the movable degree of oil. Our findings are critical for enhancing the efficiency of shale oil recovery, carbon dioxide geological sequestration, and other related areas.

Speaker: Guangyuan wei (China University of Petroleum(East China))

17:00 → 18:00 MS13: 1.3

17:00 Wetting behaviors and oil occurrence status of shale reservoirs

A contrast-variation technique in small-angle neutron scattering (CV-SANS) is employed to investigate the interfacial chemistry of shale oil reservoirs using reagents that span a range of polarities, including water, toluene, and dimethyl methanamide. Through five different experimental strategies, the work demonstrates a modification of shale wettability, ranging from enhancement, weakening, to reversal. This study also presents an innovative approach for characterizing the status of oil occurrence at the nanometer scale, and new insights into the scattering vector-particle size (q-r) relationship in polydisperse systems. The unique CV-SANS technique shows that shale with low contents of total organic carbon, clays, and porosity typically indicates better oil mobility, associated with larger particle scales. Meanwhile, the results indicate that an increase in pore scale does not necessarily accompany the rise in radius of gyration when mass density spatial variation occurs in the system. Collectively, this work establishes a direct correlation between size r in real space and q in reciprocal space and decodes the interfacial wettability traits in nanopores of shale oil reservoirs.

Speaker: Dr Tao Zhang (Department of Earth and Environmental Sciences, University of Texas at Arlington, Arlington, Texas 76019, United States.)

17:15 Experimental study of gas flow and relative permeability in low-porosity media using LF-NMR

The key characteristics of complex oil and gas reservoirs include high heterogeneity in the porous space, ultra-low permeability resulting from the nanoscale dimensions of pores, and the presence of solid insoluble organic compounds in the rock. These factors complicate the application of existing physical and mathematical flow models with sufficient accuracy. This causes challenges in accurately predicting producible hydrocarbon reserves and impedes the development of unconventional formations.
To enhance the characterization of the gas flow in low-porosity and low-permeability media, a detailed study of mass transfer is essential. This involves obtaining the relative permeability for multiphase systems that is typically determined from laboratory filtration experiments using rock samples. However, assumptions made during relative permeability determination, including methodological ones, often prove invalid when describing mass transfer in low-permeability porous media, resulting in quality of the field hydrodynamic model and increase development risks.
The objective of this study is to develop an enhanced laboratory-based method for determining gas-water and oil-water relative permeability in medium- and low-permeability reservoirs using NMR relaxometry under high-pressure conditions. NMR relaxometry enables the quick and accurate determination of sample saturation in tight rocks without additional contrasting during the core flooding experiment. The study considers surface phenomena in liquid-gas, liquid-solid, liquid-liquid, and gas-solid systems, determining their impact on mass transfer during filtration in rock samples. Experimental study was conducted using pressure-pulse decay porosimetry for obtaining reservoir properties, low-field NMR relaxometry (2 MHz) on 1-inch core plugs and X-ray computed microtomography. Probes of degassed oil samples, deuterium oxide, carbon dioxide and methane were used as fluids in experimental modeling of the relative permeability.
As result, the method for determining the relative permeability in two-phase systems using NMR relaxometry was proposed. The current study also reports the results of fluid adsorption on crushed rock samples containing clays and organic matter using high-pressure NMR experiments. The analysis of results include the three-dimensional pore-network model based on experimental work. Validation of the model was conducted using values of reservoir properties (porosity, permeability, and pore size) determined by computed microtomography, as well as permeability values from the obtained relative permeability curves. In addition, sensitivity analysis of the developed pore-network model highlights the influence of pore connectivity, pore size distribution, gas phase diffusion on the absolute and relative gas permeability.

Speaker: Dr Aliya Mukhametdinova (Skolkovo Institute of Science and Technology)

17:30 A comprehensive study on shale pyrolysis dynamics by real-time in-situ imaging technology

Shale oil and gas primarily exist in nanoscale pore-fracture networks. Despite of the large resources of the oil shale and low-medium mature shale, limited removable hydrocarbon and extremely low permeability due to limited pores restrict in the development of those unconventional resources. Therefore, different pyrolysis technologies, such as in situ conversion pyrolysis, superheated steam, nitrogen, electrofrac and etc., were emerged to accomplish the recovery. With the pyrolysis and maturing process, the kerogen was transformed into oil and gas, and more fractures and pores were generated, which increases both the permeability and hydrocarbon in the shale.
In order to study this dynamic process, a real-time in-situ imaging via environmental scanning electron microscope was applied to characterize and analyze the nano to micro scale changes of the shale quantitatively. Afterwards, Energy Dispersive Spectrometer (EDS), Rock Evaluation, and Thermal Gravity Analysis-Fourier Transform Infrared Spectroscopy (TGA-FTIR) were conducted for the physical and chemical alternation of the shale components and expulsed fluid. The real-time in situ SEM showed that 1) nano-fractures started to appear below 100 °C; 2) inorganic nano-fracture width demonstrated a non-monotonous relationship with temperature; and 3) kerogens amount decreased monotonously as temperature increased, especially during 400-500oC. TGA-FTIR indicated 4 pyrolysis stages with different characteristic changes, in which main expulsed products were CO2, H2O, and light hydrocarbons C1-C5. SEM images along with EDS characterized the inorganic components and their changes after pyrolysis.
These findings will promote fundamental understanding of oil shale pyrolysis dynamics at nanoscale and provide key guidance on oil shale extraction at reservoir scale.

Speaker: Xia Yin (Petroleum Exploration and Production Research Institute, Sinopec)

17:45 Occurrence characteristics and quantitative evaluation of micro-nano pore shale oil: A case study of Lianggaoshan Formation shale strata in northeast Sichuan, China

The reservoir space of shale series is mainly composed of micro and nano pores. It is significance to carry out the occurrence characteristics and quantitative evaluation of shale oil with micro- nano pores for the study of shale oil rich and integrated reservoirs. In 2020, Well Ping’ an 1, located in the northeastern region of Sichuan Basin, achieved a high yield of 100 tons in Jurassic Lianggaoshan Formation shale, realizing a major breakthrough in shale oil and gas exploration of Lianggaoshan Formation in Sichuan Basin and showing a broad exploration prospect of shale oil in this area [1]. However, the rapid sedimentary facies change, complex and diverse lithofacies, large maturity distribution range (Ro: 0.9%-1.9%), and multiple oil types of the shale strata in the Lianggaoshan Formation lead to unclear occurrence characteristics and content of micro-nano pore shale oil, which seriously restricts the optimization of favorable zones in this area [2]. Therefore, taking the medium-high mature shale strata of Lianggaoshan Formation in northeast Sichuan area of China as an example, this study carried out experimental analysis of conventional core and preserved core samples in the study area, such as scanning electron microscopy, low-temperature nitrogen adsorption, high-pressure mercury injection, nuclear magnetic resonance, multi-step pyrolysis, and original oil and gas chromatography. The results show that oil film/carbon slag is widely developed in the micro-nano pores of shale, and the lower limit of free oil pore size is ~3nm. The occurrence (oil) volume of organic-rich layered clay shale and organic-low layered felsic shale is the largest. TOC, clay content and maturity are the main control factors of oil adsorption in Lianggaoshan shale. Combined with light hydrocarbon recovery and heavy hydrocarbon correction, the total oil content calculation model of the original formation in the study area is determined. The total oil content of the organic-rich layered clay shale and organic-low layered felsic shale is higher than that of other rock facies, which can be used as a favorable oil reservoir for research.

Speaker: Xuefeng Bai (China University of Petroleum (East China))

17:00 → 18:00 MS15: 1.3

17:00 Application of Diffusion Models to Generate Multiphase Fluid Pore-Scale Images

Generative Adversarial Networks (GANs) have been a typical example of how machine learning has been successfully applied, using three-dimensional images as training datasets, to generate realizations of the pore space, as well as to produce super-resolution images. We further this work with a new generative model: diffusion models (DMs), to generate images of both the pore space and two fluid phases within the pore space, using experimental high-resolution three-dimensional X-ray images of the pore space and fluids at different fractional flows as training datasets. We demonstrate that using DMs, we can generate images for a range of saturations and compare the quality of these realizations against experimental data in terms of Minkowski functionals: saturation, interfacial area, mean curvature, and connectivity (Euler characteristic), as well as contact angle. DMs are a very promising algorithm type for the study of multiphase flow in porous media, with effectiveness comparable to, if not surpassing, GANs. We discuss the use of this methodology to complement pore-scale displacement and imaging experiments, to generate images of arbitrary size and for a wide saturation range. These images provide a basis for further analysis and pore-scale modeling, including the prediction of averaged multiphase flow properties, such as capillary pressure and relative permeability.

Speaker: Linqi Zhu (Imperial College London/ Chinese Academy of Sciences)

17:15 Predicting ultimate hydrogen production and residual volume during cyclic underground hydrogen storage in porous media using machine learning

In the context of climate change mitigation, underground/subsurface hydrogen storage (UHS) is regarded as a solution that could help tackle the imbalance in renewable energy supply. Excess energy can be stored as molecular hydrogen (H2) and re-used when it is needed. To enable large-scale storage in underground geologic formations, reservoir simulation of cyclic loading scenarios will be used to optimize the storage operations. Hydrogen storage in geological reservoirs involves many physical phenomena related to reservoir dynamics, trapping mechanisms, and potential reactions with minerals and bacteria. Simulating different scenarios of fast H2 injection and production while considering those physical constraints and optimized economic and operational parameters generates loads of data and therefore requires high computational power. The nature of UHS operations and the underlying storage reservoir physics make variations in the generated data sets extensive. Predictive tools like machine learning (ML) that are data dependent can to some extent fill the knowledge gap while simultaneously making the operations more viable. It is therefore interesting to develop tools that can predict parameters associated with fast cyclic operations while minimizing the computational cost. Such methods could help optimize storage operations and reduce operational costs.
The work summarized in this abstract attempt to showcase how machine-learned models trained with data generated from simulated UHS systems in porous media can be used to predict ultimate hydrogen production. The same approach is applied to predict H2 amounts that remain trapped in the reservoir due to physics-related parameters. The OPM flow reservoir simulator is used to build models encompassing physical and dynamic parameters to generate cyclic field data which are then used to train time series neural network (NN) models. In the presented work, the reliability and accuracy of the model are ensured through hyper-parameter tuning and cross-validation analysis on a windowed time-series NN. The results obtained in the study show the relevance of machine learning (ML) methods in predicting ultimate H2 production and residual H2 amount in geological reservoirs. The trained models captured the data trends with mean squared error (MSE) and mean absolute error (MAE), commonly termed as loss functions, from training and validation steps used as accuracy metrics. In one of the reservoir-scale cases, the machine-learned training and predictions in a physics-oriented approach reduced the computational time by about 6773% in comparison with simulation runs by OPM flow on a 4-layer reservoir model. The accuracy metrics and predictions are even much better on simulation data obtained with a one-layer model having a horizontal well along its top and based on a complex cyclic schedule. By showing how machine-learned models can capture some of the complex physical uncertainties associated with underground/subsurface hydrogen storage, our research aims to bring a technical contribution to the development of this technology. Field-scale simulated production and injection data are used to train the models. The paper therefore presents the methodology followed, results from the machine learning methods, and the outlook for future tasks.

Speaker: Raymond Mushabe (University of Bergen)

13052024_Interpore_2024_Raymond_mushabe.pptx

17:30 Efficient 3D Digital Rock Detail Reconstruction and Quality Enhancement with Super-Resolution Transformer

High-quality digital rocks are essential for high-precision pore-scale modeling. However, limited by the imaging hardware, meeting the requirements of high resolution (HR) and a wide field of view (FOV) simultaneously is challenging. In this study, we propose a novel Efficient Attention Super-Resolution Transformer (EAST) to boost digital rock quality, which reconstructs HR details from low resolution 3D images with wide FOV. To address the specific characteristics of digital rock tasks, EAST employs a hybrid loss function to recover sharp pore edges and combat noise. Furthermore, we utilize data augmentation techniques to improve model generalization. The hyperparameters of EAST are optimized to trade off speed and super-resolution quality. Through quantitative evaluations and qualitative visualizations, we validate the superior reliability of EAST in terms of recovering sharp edges and eliminating noise. Compared to the efficient convolutional neural network-based model RCAN, EAST achieves higher performance with only 22% of the parameters due to hybrid efficient attention mechanism. Finally, we verify the physical accuracy of the EAST reconstruction results by direct flow simulation method. The results demonstrate that EAST significantly reduces the relative error of single-phase permeability from 35% in Tricubic interpolation to 8%. Moreover, EAST is 185% faster than RCAN, which implies that EAST could process a digital rock with $10^{9}$ voxels in 4.3 hours, thereby generating an impressive 6.4×$10^{10}$ voxels.

Keywords: digital rock physics, 3D image super-resolution, deep learning, Transformer

Speaker: Mr Zhihao Xing (China University of Petroleum (East China))

17:45 Integrating deterministic geological model with multimodal machine learning to predict shale productivity

Over the past ten years, diverse machine learning techniques have been extensively employed in forecasting output for non-traditional reservoirs. Nevertheless, these techniques primarily utilized discrete point data obtained from field databases, such as well drilling, completion, monitoring, experiments, and production data of horizontal wells. However, this data fails to capture the spatial heterogeneity of reservoir properties, which ultimately undermines the reliability of shale gas production. This study proposes a multimodal machine learning approach that utilizes a geological model restricted by well-logging and 3D seismic data. The deterministic geological model is constructed by utilizing the high vertical resolution of well logs and the planar resolution of reflection 3D seismic attributes. Subsequently, the detailed and precise data regarding geological properties such as porosity, permeability, gas saturation, TOC, brittleness, thickness, etc. in the vicinity of horizontal wells are acquired using the aforementioned geological model. These data are then combined with traditional tabular datasets to accurately represent the heterogeneity of the reservoir. Subsequently, a multimodal model is created that combines a convolutional neural network (CNN) module and an artificial neural network (ANN) module. The CNN module is designed to handle high-level information from the visual dataset, while the ANN module is used to evaluate the typical tabular datasets. A fusion module integrated and processed input from both modalities. The results demonstrate that the multimodal approach attained a coefficient of determination (R2) of 0.845 for the 12-month shale gas production prediction, which is greater than the R2 value of 0.721 obtained using simply the ANN model. In addition, this approach based on the multimodal of analysis can elucidate the varying levels of shale gas production between two horizontal wells that have similar average reservoir attributes. This is achieved by taking into account the lateral heterogeneity of the producing formations that the two horizontal wells have penetrated. Hence, the exceptional predictive accuracy of the multimodal machine learning technique offers valuable insights into forecasting shale gas production. This approach may be utilized to guide the selection of optimal locations for new horizontal wells and facilitate the efficient exploitation of shale gas reservoirs.

Speaker: Gang Hui (China University of Petroleum Beijing)

Tuesday, 14 May

09:25 → 10:55 Poster: Poster Session III

09:25 3D spatial reconstruction of multi-scale porous media based on deep learning

Various rocks such as carbonate, coal or shale contain both micro- and macro-pores. To accurately predict the fluid flow and mechanical properties of these porous media, a multi-scale characterization of the pore space is essential. The hybrid superposition method performs well in this multiscale reconstruction,but requires input images with two resolutions (high and low) and different reconstruction methods.In addition, the stacking algorithm does not consider the position distribution of the two-scale pores under different resolution conditions, and some stacking techniques may even introduce a certain degree of artifacts. Here we thus propose an effective approach based on generative adversarial network (GAN) for efficient and reliable multiscale digital rock reconstruction.According to the homogeneity and heterogeneity of rock, a method for preferentially selecting training data has been proposed, making the model training more efficient and accurate.The qualitative and quantitative comparisons of the experimental results show that the results of multiscale reconstruction are similar to the real high-resolution pore structure in terms of complex pore geometry and pore surface morphology. The geometric, topological and permeability properties of multiscale reconstruction results are almost identical to those of the real high-resolution pore structures. The experiments also validate that the proposal algorithm adequately accounts for rock heterogeneity and anisotropy.This work provides an effective method for fine multiscale modeling of porous media.

Speaker: Yanxia Liu (Qingdao University of Science and Technology)

09:25 A multiscale simulation method for aerosol transport in a mouth-to-lobar bronchi model

Prediction of aerosol deposition in the respiratory tract has become a major focus for inhaled drug delivery and air pollution prevention. Computational fluid-particle dynamics (CFPD) provides the most accurate local prediction results, but the computational cost is unbearable for the CFPD simulation of the whole respiratory tract. This challenge arises due to the multiscale nature of the respiratory tract and numerous bronchioles [1]. A common practice is to truncate the bronchial tree and simulate on the truncated model using CFPD. In this study, a novel boundary condition for the truncated respiratory tract model based on multiscale simulation is proposed, named extended-bronchus-network (EBN) boundary condition. The truncated model is extended to the terminal bronchial and the air flow in the extended part is simulated using local hydraulic resistance equivalence pore network model (PNM) [2]. The pressure and flow rate at the outlet of truncated model is consistent with PNM, which provides the outlet boundary condition for CFPD of truncated model. A comparison against EBN with the widely used uniform pressure outlet boundary condition [3] is made. It reveals that EBN boundary condition in this study is more physiologically and closely to the clinical data. The maximum relative disparity of nano-micro aerosol penetration fraction of the right middle lobe and right lower lobe between these two methods is 93% and the maximum relative disparity of aerosol deposition fraction within the trachea-lobar bronchi is 30%. EBN boundary condition is implemented for the simulation of nano-micro particles transport in the mouth-to-lobar bronchi (MLB) model at the inspiration volume rate of 15, 60, 90 L/min, respectively. Result shows that for particles equal to or less than 1 μm in size, over 90% penetrate deeper into the pulmonary lobes, with inspiration volume rate and particle size having minimal impact on penetration fraction. However, micro particles more probably deposit in the MLB with larger inspiration volume rate. Notably, when particles larger than 6 μm are inhaled at 15 L/min or particles larger than 3 μm are inhaled at 60 L/min, over 40% of them deposit in the MLB. Particle deposition hotspots forming reason is qualitatively analyzed. This work provides a reference for the optimization of drug delivery, targeted therapy, the prevention and control of pollutants. It also lays a foundation for the simulation of aerosol transport in whole lung.

Speaker: Han Xiao (Tsinghua univeristy)

09:25 A Novel Approach for Advancing Lithology Classification Through Machine Learning and Deep Learning Models

Manual interpretation of geophysical logging data can be a tedious and time consuming task in the case of the non-linear behavior of well-logging signals. In this study, we introduced three novel algorithms including GrowNet, Deep-Insight and blender in the classification of rock facies. To compare the performance of these models, we used algorithms such as XGBoost, Random Forest and Support Vector Machine. The data employed is from the South and North Viking Graben, comprising twelve lithological rock facies. Deep-insight was used to convert tabular data into images and these generated images were employed as inputs for a convolutional neural network. It demonstrated better performance in lithology classification compared to traditional models such as Decision Tree and Logistic Regression. The GrowNet and blender models for lithology classification successfully increased the penalty score and accuracy compared to the FORCE2020 competition. This study highlights the value of a hybrid approach, integrating the SMOTE and NearMiss algorithms in order to balance the data. Addressing missing data is crucial for dependable analysis; employing regression models, rather than simplistic techniques such as mean imputation, enhances accuracy. Additionally, knowledge-based feature augmentation techniques are selectively applied based on the availability of relevant features, thereby enhancing the effectiveness of the overall model learning process. To more efficiently evaluate and compare the performance of the models in a multi-class classification, we introduced the class prediction error plot instead of using confusion matrix.

Speaker: Dr Seyed Mojtaba Hosseini-Nasab (School of Chemical, Oil and Gas Engineering)

09:25 Acoustic Properties of Hydrate-Bearing Porous Media Based on Electrical-Mechanical-Acoustic Multi-physics-Field Coupling Model

There are technical difficulties in accurately controlling and evaluating the micro-distribution mode and saturation of hydrate in physical simulation experiments. Limitations exist in the experimental technologies for investigating acoustic properties of hydrate-bearing sediments and establishing interpretation models of reservoir parameters. The acoustic properties of hydrate-bearing sediments are influenced by hydrate saturation and micro-distribution modes, skeleton particle arrangement and shape significantly. Currently, there is a lack of research work on the influence mechanisms of skeleton particle arrangement and particle shape. Three-dimensional numerical models were established for hydrate-bearing porous media based on digital rock physics technology. For the three kinds of hydrate micro-distribution modes (suspension, contact and cementation), finite-element models were established individually based on the method of electrical-mechanical-acoustic multi-physics-field coupling. The effects of micro-distribution mode and hydrate saturation on sound velocity and attenuation of porous media were examined. The results of sound velocity from the numerical and theoretical models were compared. The influences of skeletal particle arrangement modes and shapes on the sound velocity and attenuation characteristics of sediments under different hydrate micro-distribution modes and saturation conditions were explored, and the mechanisms were discussed. It was demonstrated that: (1) when the hydrate saturation is low, the volumetric proportion of quartz sand particles in the diamond-arrangement model is higher than that in the cubic-arrangement model, thus the sound velocity of the diamond-arrangement model is higher; as the hydrate saturation increases, the difference in the volumetric proportion of hydrates between the two models increases and the volumetric proportion of hydrates in the cubic-arrangement model is higher, consequently the sound velocity growth rate in the diamond-arrangement model is lower; (2) the porosity of the diamond-arrangement model is smaller than that of the cubic-arrangement model, and the energy attenuation during the propagation of sound waves is lower; (3) compared with the spherical-particle model, the elliptical-particle model contains more pores with smaller aspect ratios, resulting in a smaller bulk modulus and lower sound velocity; (4) the ellipsoidal-particle model contains more and smaller pores, which results in lower wave-energy loss than that of the spherical particle model. This study may provide a theoretical support for the data interpretation of seismic exploration and sonic logging for natural gas hydrate reservoirs.

Speaker: Lanchang Xing (China University of Petroleum (East China))

09:25 Advancing Underground Hydrogen Storage: Insights from Molecular Simulations of Wettability and Interfacial Tension

The intermittency in energy supply and demand from renewable resources, which is often caused by seasonal variations, necessitates the development of long-term energy storage solutions. One promising approach is Underground Hydrogen Storage (UHS), a scheme in which hydrogen is strategically stored in subsurface formations to maintain market equilibrium. Depleted oil and gas reservoirs and saline aquifers present an attractive option for UHS. The appeal of these reservoirs lies in their existing infrastructure and the presence of subsurface traps, which are essential for sealing reservoir fluids. To fully leverage these reservoirs for UHS, it’s crucial to understand the wettability and interfacial tension (IFT) of the gas, brine, and rock systems. These properties play a significant role in determining capillary pressure, fluid migration, and drainage in porous media. We used molecular dynamics simulations to study the impact of temperature (300 and 323 K) and pressure (5, 10, 15, and 20 MPa) on the IFT between hydrogen and formation brine. We also investigated the effects of two carrier gases, methane and carbon dioxide, on the system. Our findings revealed that the IFT of pure hydrogen/brine did not change significantly (less than 1 mN/m) with pressure. However, the addition of methane and carbon dioxide to the system lowered the IFT, with carbon dioxide having a more pronounced impact. In addition to IFT, we studied the contact angle between a gas phase (comprising hydrogen and its mixtures with methane and carbon dioxide), the brine and rock (calcite and silica) at a pressure of 20 MPa and a temperature of 300 K. With the exception of the H2-CO2/brine/silica, all systems exhibited complete water-wetting with a zero-contact angle. The exception can be attributed to the complete protonation of silanol groups, which is caused by the dissolution and hydration of CO2 to form carbonic acid, resulting in a low pH of 3. This research contributes to our understanding of UHS and provides valuable insights that could aid in the optimization of energy storage strategies. It underscores the importance of considering the effects of temperature, pressure, and carrier gases on the IFT and wettability of the system, which are critical for the efficient storage and retrieval of hydrogen in subsurface formations.

Speaker: Moataz Abu-Al-Saud (Saudi Aramco)

09:25 Analysis of Mechanical Properties, Stress State and Wellbore Instability Mechanism of the Paleogene Shale in the Central Bohai Sea

There are abundant oil and gas reserves in the central Bohai Sea. However, during the development of oil fields, particularly in the mid-deep shale formation of the Paleogene, challenging downhole conditions such as block spalling, pump pressure and torque increase, and shale falling from the vibrating screen are common occurrences. These complex drilling issues result in prolonged non-productive time, escalated drilling expenses, and even pose a significant threat to drilling safety. As such, it is imperative to address these challenges through advanced theoretical understanding and technical means.
To address the issue of wellbore instability during drilling, a comprehensive study was conducted on the mechanical properties, stress state, and instability mechanism of the Paleogene shale formation in the central Bohai Sea. This was achieved through a combination of core experiments, field data analysis, and numerical simulations. The core mechanics experiments revealed that the Paleogene shale is anisotropic due to the influence of weak bedding planes, with a total cohesion of 8-10 MPa and an internal friction angle of 35°. The cohesion of the bedding plane is approximately 2 MPa, with an internal friction angle of 25°. Leak off tests conducted during drilling analysis indicated that the minimum horizontal principal stress of the Paleogene formation at a depth of approximately 4000m is 62 MPa, while the maximum horizontal principal stress is 75 MPa. These values are lower than the overburden pressure. The parameters of in-situ stress calculation model were calibrated based on the leak off tests data, and the stress state of the shale formation was evaluated. A numerical model of borehole stability in the Paleocene formation was established, using the mechanical parameters of shale as the basic data and the stress state as the boundary condition. The model calculated the change in borehole state under different drilling fluid density conditions, and the change of drilling fluid safety density window with the inclination angle and azimuth angle of development wells was obtained by combining with theoretical calculations. The wellbore instability mechanism was defined based on the physico-chemical and mechanical properties of Paleocene shale. The results indicate that the mid-deep Paleogene shale in the central Bohai Sea is a transitional shale from expansive to hard-brittle, with developed bedding fractures. Drilling fluid filtrate invades into fractures under the action of capillary force, hydraulic pressure difference, and chemical potential difference, causing pore pressure increase and formation strength decrease. Under the action of strength anisotropy, it destroys along the weak surface and causes serious wellbore instability.
Based on the wellbore instability mechanism of the Paleogene shale formation in the central Bohai Sea, the primary engineering countermeasure involves utilizing micron and nano-scale plugging agents to seal micro-cracks. Additionally, the density of drilling fluid should be appropriately increased to achieve both mechanical and seepage balance. To avoid wellbore collapse caused by pressure fluctuations, continuous circulation drilling technology can be employed. These measures provide valuable insight for mitigating the complex drilling issues encountered in similar formations.

Speaker: Mr Tao Xie (China University of Petroleum (Beijing))

09:25 Applications of pore network modelling in predicting the permeability in hydrate-bearing sediment

Permeability plays a pivotal role in governing the fluid flow within hydrate-bearing sediment (HBS) and significantly influences the efficiency of natural gas production from hydrate reservoirs. However, the measurement of HBS permeability is challenging due to the complexities of maintaining phase equilibrium conditions during testing. This study focused on the sandy hydrate-bearing sediments and intended to elucidate the evolution of absolute and relative permeability as a function of hydrate saturation by the mean of pore network modelling. In the developed model, the hydrate formation process in the porous media is simulated incorporating two key sub-processes: hydrate nucleation and hydrate growth. We integrated various theories from hydrate kinetics, including the random nucleation theory, interface growth theory, Ostwald-Ripening effect, and pore water activity theory, to control the hydrate formation process. For modeling fluid flow within the pore networks, we utilized the conductivity calculation method. The constructed pore network model was employed to analyze permeability variations within different pore networks. Simulation results from a series of regular networks demonstrated that the distribution of formed hydrate and the permeability of HBS are influenced by factors such as model dimension, hydrate nucleation fraction, and hydrate growth type. Further simulations based on CT images showed the changes of absolute permeability and gas-water two-phase permeability during hydrate formation within different sandy sediments. As a result of these simulations, we provided parameter ranges suitable for the application of the Masuda model in predicting absolute permeability in sandy hydrate reservoirs, as well as the Brooks-Corey model and van Genuchten model for predicting two-phase gas-water permeability. This study is hoped to bring new insights into the field of micro-scale seepage research within hydrate reservoirs.

Speaker: Dr Yongchao Zhang (Qingdao Institute of Marine Geology)

09:25 Assessment of CO2 Storage Capacities in Saline Aquifers Using Material Balance Equations

Estimation the capacities for CO2 storage plays a pivotal role in carbon capture and storage (CCS) projects. The material balance equation (MBE) approach, commonly applied in this domain, provides direct estimations of CO2 storage potential. Traditional MBE techniques, however, often compute the original fluid in-place volume via volumetric assessments without subsequent validation, posing challenges to estimation accuracy. Recognizing the impact of precise original fluid in-place volume calculations reflective of the reservoir's pore volume on storage capacity, our research introduces an enhanced MBE methodology. We evaluated the effectiveness of our enhanced MBE method through comparisons with a commercial reservoir simulator, applying it to both a constructed synthetic aquifer scenario and the Sleipner field model. The application to the synthetic aquifer scenario resulted in a notably precise CO2 storage capacity estimate, with a relative error of just 2.085%, based on data from a single year of injection. This high level of accuracy was similarly observed in the Sleipner field application, where the method achieved a relative error of 1.6873%. Our developed MBE method further demonstrates its reliability in accurately forecasting CO2 storage capacities across a range of conditions, including variations in grid sizes, rock properties, injection rates, operational strategies, and geological heterogeneity.

Speaker: Sangkeon Park (Seoul National University)

09:25 Comparisons between a dual-pore-network model and a hybrid pore-network-continuum model for predicting permeability and formation factor of multiscale carbonate digital rocks

Many underground rocks have been found to possess complex multiscale porous structures with bimodal/multimodal pore size distributions, such as carbonate rocks, tight sandstones, and shales (Bultreys et al., 2016; Shan Wang et al., 2022; Nijat Hakimov et al., 2022). Flow and transport in these rocks play an important role in many subsurface applications. In addition to in-situ core experiments, several pore-scale numerical models have been developed to simulate flow and transport in multiscale porous structures, including dual-pore-network, micro-continuum and pore-network-continuum models (Francisco J. Carrillo et al., 2020; Zhang et al., 2021; Tom Bultreys et al., 2015). Compared to micro-continuum and pore-network-continuum models, a dual-pore-network model is computationally efficient and can be used to the full core analysis. However, the effect of smearing heterogeneity of microporous domains (i.e., sub-resolution domains) on numerical predictions needs to be studied.
In this work, absolute permeability and formation factor of Estaillades carbonate rocks are modelled by both a dual-pore-network model and a hybrid pore-network-continuum model. We show the key difference between the dual-pore-network model and pore-network-continuum model for treating microporous domains. By comparing numerical predictions of the two models, the influence of microporous heterogeneity on seepage characteristics of carbonate rocks is extensively explored. Moreover, the dual-pore-network model is used to study the influence of image resolution on the prediction of permeability and formation factor. As reducing the resolution of the original image, it is observed that more and more resolved pores are identified as microporosity, while the modelled permeability decreases.

Speaker: Mr Xingyuan Zhao (chongqing university)

09:25 Constructing Three-Dimensional Digital Rock of Continental Shale with Multi-Mineral Components Using Machine Learning Segmentation Algorithms

Continental shales are characterized by their highly developed laminations and a high clay content, which pose significant challenges in terms of sample preparation and fluid saturation process for traditional rock physics experiments. Digital rock physics (DRP) has been emerged as an alternative method for unconventional reservoir. The establishment of a high-precision three-dimensional digital rock is crucial to ensure the accuracy of numerical simulations for determining rock physics properties. While continental shale reservoirs exhibit numerous nanopores, indistinct clay particle boundaries, and small fractures in bedding planes, which pose challenges to the segmentation of two or three dimensional grayscale images.X-ray Computer Tomography (CT), Scanning Electron Microscope Mineral Quantitative Evaluation (QEMSCAN), and Multi-spectral Automated Petrographic System (MAPS) tests are performed sequentially on continental shale samples. The scanning resolutions for these tests are 1.35μm, 1μm, and 10nm, respectively. Initially, the grayscale ranges for different mineral components were identified by combining QEMSCAN with CT scans images. Afterwards, a machine learning image segmentation algorithm was employed to partition the CT scan grayscale images into five components: pores, organic matter, clay minerals, feldspathic minerals, carbonate minerals, and pyrite. Subsequently, the same machine learning segmentation algorithm was applied to the two-dimensional MAPS images of the shale sample. This was done to identify pore spaces that were smaller than the CT resolution present in the carbonate minerals, organic matter, and clay minerals, and to calculate the surface porosity.The segmentation results of the X-ray CT scan images indicate that the machine learning segmentation algorithm improve the accuracy in identifying the boundaries of the matrix and pores compared to traditional grayscale-based segmentation method. The machine learning-based image segmentation algorithms can also accurately identify unidirectionally extended microcracks. The contents of the main mineral components calculated from digital rocks agree well with those measured by X-ray Diffraction (XRD). However, the porosity identified in CT images was considerably lower than helium porosity of the samples because only large intergranular pores and fractures can be resolved by CT. There are lots of sub-resolution pores in continental pores as illustrated in MAPS images compared to marine shale gas reservoirs, the organic matter pores in continental shale oil reservoirs are not well developed, and the microporosity is about 5%. The intercrystalline pores in clay minerals are the main reservoir space for continental shale oil, with a microporosity of 10%. The total porosities of the multi-mineral component digital rocks were calculated by considering the volume fractions of the main minerals and their corresponding microporosities. The porosity values obtained from the digital rocks exhibit excellent correlation with those derived from laboratory measurements. The three-dimensional digital rock model serves as a precise representation of the pore structure, enabling quantitative analysis of the microstructure and numerical simulation of the physical properties of continental shale.

Key words: Digital Rock Physics, Continental Shale, Machine Learning Image Segmentation, Pore Structure Characterization, X-ray Computer Tomography (CT) scans Imaging

Speaker: Ms Min Li (China University of Petroleum (East China))

interpore海报李渂.pdf

09:25 Coupled studies of oil compositions and storage spaces in the Kongdian Shale Formation, Bohai Bay Basin, Eastern China

The shale in the Kongdian Formation, Bohai Bay Basin is one of the leading shale oil targets in China and attracted attention from both industry and academics since the 2010s. Shale oil is known to distribute in the $\mu$m to nm pores in the shale formations. The oil compositions and pore spaces of shale formations strongly influence the shale oil production behavior for an efficient development. The four components of shale oil (saturates, aromatics, resins, and asphaltene) and pore space of shale have been studied separately in many previous researches. However, the combined distribution of different shale oil compositions in the pore spaces has rarely been studied. To investigate the storage space of different compositions of shale oil, t, this study combined organic geochemical and petrophysical methods for core samples of Kongdian Formation. Extracts were collected after the 1st, 5th, 10th, and 30th day of solvent extraction, then analyzed by bitumen extraction and separation and GC-FID to determine the composition changes vs. time. Shales were collected at the same time interval to investigate the pore structure changes vs. time by mercury intrusion porosimetry and nitrogen adsorption. Results show that as the solvent extraction time gets longer, (1) the main composition of extracts changes from saturates to resins, and saturates gradually become heavier, (2) the porosity of shale gradually increases, and pore space first mainly increases in the $\mu$m-nm pore, then mainly increase in nm pores. In summary, this study is important to understand the distribution of different shale oil compositions and provide fundamentally important knowledge in reservoir evaluation.

Speaker: Weixing Yan (China University of Petroleum (East China))

09:25 Development of multiphase flow simulation method in DEM under a movable-grain condition

Understanding how hydrodynamics of multiphase flow couple porous media deformation is essential to ensure successful engineering practices such as geological carbon sequestration. However, existing hydro-mechanical coupled models face significant challenges in reliably and efficiently capturing fluid-grain displacement patterns. In response, we present a novel two-way coupled hydro-mechanical discrete-element method model that manages fast fluid transport and considers the synchronising pore deformation. This model, which employs the implicit finite volume approach to solve pore pressure under a remarkable timestep, predicts fluid-fluid and fluid-grain interactions unconditionally stable. We design a pressure-volume iteration scheme to balance injection-induced pressure changes with pore structure rearrangements dynamically. Additionally, we incorporate adaptive flow front advancement criteria to enhance the capture of interface motion, particularly in complex flow scenarios where fluid migration surpasses the frontline pores or is impeded by capillary effects. The robustness and reliability of our model, validated against Darcy flow theory and experimental observations from Hele-Shaw tests, demonstrate its capability in accurately analysing multiphase fluid migration and dynamic fluid-grain interactions in porous media. We are confident in considering this model a powerful tool to illustrate the micro-mechanisms of multiphase flow in deformable porous media.

Speaker: Mr Quanwei Dai (PhD Candidate)

09:25 Direct numerical simulation of CH4 - CO2 mixture flow in nanoporous media

CO2 injection into shale is believed beneficial for both enhanced gas recovery and CO2 storage. The confined space and strong solid-molecule interactions in nanoporous media lead to different occurrence states of CH4 and CO2, causing the flow of CH4 - CO2 mixture in shale to deviate from predictions of continuum models. In this study, we employed a modified pseudo-potential based lattice Boltzmann (LB) model to study gas mixtures in nanoporous media. The mixed equation of state is used to calculate interaction force between gas mixtures. The solid-molecule interaction force is determined by comparing density profiles from LB simulation and molecular dynamics. The proposed method can model the flow of CH4-CO2 mixture in complex topological nanopores with various surface properties. Our results demonstrate that the Langmuir model and BET theory cannot accurately describe the adsorption isotherms of CH4 and CO2 in nanoporous media. The transport capacity of CH4-CO2 mixture in nanoporous media is found affected by surface properties. In organic nanoporous media, CO2 molecules tend to accumulate near the pore surface, hindering their flow compared to CH4 molecules. In contrast, inorganic nanoporous media facilitate the flow of both CH4 and CO2 molecules. We propose a modified apparent permeability model to describe the flow capacity of a CH4-CO2 mixture in nanoporous media.

Speaker: Mr Chenyue Xie (China University of Geosiences (Wuhan))

09:25 Dynamic X-ray computed microtomography imaging of multiphase flow in porous media using deep learning

Dynamic imaging of multiphase flow in porous media using X-ray microcomputed tomography (micro-CT) has been a technique exclusive to synchrotron-based systems. With the emergence of deep learning, however, the lower X-ray flux from a standard micro-CT system, and thus lower signal and higher noise under dynamic imaging conditions can be compensated for by use of convolutional neural networks with a priori knowledge of the imaged domain and the noise signature.

In this work, a cycle consistent generative adversarial network (CycleGAN) based on the principle of unpaired image-to-image translation is utilized for transforming noisy micro-CT images to clean images. The two main objectives of this study are to assess the levels of noise that would be prevalent during dynamic imaging, and to design a DL network to denoise these images. To obtain the relevant data, fast and slow scans were performed at set saturation levels in the sample. The examined two-phase flow system consisted of air and water (the latter doped with potassium iodide – KI). The sample in consideration was a Bentheimer sandstone sample and the experiment was conducted with a custom-built benchtop micro-CT system located at Oregon State University. To obtain ground truth (GT) images for the training of the CycleGAN model, a high-quality dry scan of the sample was acquired before the KI doped water was injected. Once the fluid was injected, subsequent fast scans were acquired, and finally, a high-quality multiphase scan was captured.

The results from denoising micro-CT scans indicate that the proposed workflow is robust and capable of improving the quality of images with good accuracy and ease of implementation. The fastest scan was conducted at 1min43s while the high-quality scans were acquired at 1hr24mins. Three fast scans with varying scan times of 1min43s, 2min45s, and 3min26s were tested. It was observed that when subjected to the CycleGAN network, the denoised images of 1min43s were adding features (often called hallucinations) in the generated results indicating that the images were too noisy as a starting point. On the other hand, 2min45s and 3min26s scans showed promising results. The accuracy of denoising was then validated by pixel-wise accuracy of the segmented denoised images.

In multiphase flow imaging, it is often not practical to acquire paired images for denoising. With the implementation of cycleGAN, the proposed research not only enhances image quality, but also indicates that the acquisition time can be decreased by more than 25 times from hours to minutes (as low as 2min45s) for dynamic imaging in standard benchtop systems.

Speaker: Ryan Armstrong (University of New South Wales)

09:25 Effect of elevated-temperature on mechanics and microstructure of basalt fibre-modified cementitious composites

Cementitious materials, known for their brittle nature, are often vulnerable to thermal degradation in deep underground and hydrothermal environments. Basalt fiber (BF), an inorganic silicate additive used in cement, has garnered significant attention due to its outstanding mechanical and thermal resistance properties. However, key experimental data are scarce on the role of BF in cement exposure at elevated-temperature conditions, and a lack of understanding of the key mechanisms of reinforcement processes. In this study, we investigate the mechanical behavior of cementitious composites with varying BF content under both ambient and elevated temperature conditions (up to 200°C) to determine the optimal dosage. Microstructural analysis and phase composition assessments are conducted to reveal the mechanisms of reinforcement, encompassing the state of the cement matrix, BF itself, BF-matrix interaction, and phase evolution. The results indicated that the addition of 0.05-0.1 wt.% BF to cement can significantly enhance its mechanical strength and crack resistance, with flexural strength improving by up to 60% after exposure to 200°C for 6 days. This enhancement is primarily attributed to multiple energy-consumption processes, including the bridging effect, breaking effect, pulling-out effect, crack deflection effect and adhesive effect. Notably, the adhesion between BF and the cement matrix improves after exposure to 200°C, leading to the formation of "network-like and granular hydration products" on the surface of BF. While needle-like hydration products are commonly observed under ambient conditions, contributing to a slight increase in the surface friction of BF, the accelerated growth of hydration products at higher temperature conditions emerges as the predominant factor enhancing mechanical strength and improving ductility of cement composites at elevated temperatures. The insights from this study provide promising prospects for the application of BF-modified cement composites in elevated-temperature environments, including deep geothermal wells, CO2 storage wells, and various other deep geo-energy applications.

Speaker: HAO HAN (University of Manchester)

09:25 Effect of pore size of electrospun membrane on quality and ion separation of nanofiltration membrane

In this research, the effect of the pore size of the electrospun membrane in the preparation of a three-layer thin film nanofiber composite membrane (TFNC) was investigated. Due to its special properties, such as high porosity and the ability to produce pore sizes ranging from tens of nanometers to several micrometers, along with different mechanical properties, it finds wide applications in various fields, including medicine and health (i.e., tissue engineering, drug delivery, protective clothing, and biosensors), environment (air and water filtration membranes), energy (solar cell, battery fuel) and makes the use of electrospun membranes highly promising in separation technology.
The three-layer membrane comprised a first layer of mesh-shaped polyester and a middle layer of a substrate consisting of hydrophobic polysulfone with a concentration of 20% by weight. The middle layer was produced by electrospinning with varying pore sizes. The third layer was a polyamide layer formed through interfacial polymerization between piperazine monomers (2wt.%) and trimesoyl chloride monomers (0.2wt.%). The polyamide layer and polysulfone fibers were characterized using infrared spectroscopy (FTIR), scanning electron microscope (SEM), bubble point, and MgSO4 divalent ion separation.
Based on the FTIR test, peaks of 1618 and 2990 were observed, indicating the presence of the polyamide layer and polysulfone substrate, respectively. The electrospinning was conducted under constant conditions, including a voltage of 17 kV, a needle-to-collector distance of 120 mm, and a variable polymer injection rate set at 2, 1.2, 0.8, and 0.5 ml/h. The diameter of the fibers was measured using SEM images (0.11 ± 1.25, 0.45 ± 0.9, 0.37 ± 0.58, and 0.12 ± 0.3 micrometers), and the pore sizes of each substrate were measured as 9.3, 7.1, 3.5, and 1.1 microns by bubble point. The MgSO4 salt separation test was conducted on membranes with various pore sizes and fiber diameters after the coating process. In this experiment, the separation percentage for MgSO4 divalent salt was measured as 0%, 23%, 51%, and 83%, respectively. The separation of MgSO4 ions increased with the reduction of the pore size.
Nanofiltration is a relatively recent separation process that has found widespread applications in the chemical and environmental industries due to its lower energy consumption and higher flux. In this study, we investigated the effect of the pore size of the electrospun layer. It was observed that the average diameter of the electrospun membrane fibers has a direct relationship with the pore size. As the diameter of the fibers decreases, the pore space also becomes smaller. Subsequently, the layer uniformity of polyamide is enhanced on the electrospun membrane, leading to a higher separation rate of bivalent ions.

Speaker: Masoud Riazi (School of Mining and Geosciences, Nazarbayev University, Kabanbay Batyr 53, Astana, Kazakhstan, 010000)

09:25 Evaluating the performance of asphalt mixture with additives to withstand salt erosion and freeze-thaw cycles

Asphalt pavement is widely used in road construction due to its smoothness, wear resistance, and ease of maintenance, making it the most commonly chosen material. However, asphalt concrete exposed to the natural environment is susceptible to various external factors, resulting in different types and degrees of damage. This greatly shortens its service life and reduces the durability of asphalt pavement. Especially in coastal regions with seasonal freezing, salt spray, tides, and rainfall can all contribute to the penetration of salt into asphalt pavement through porous media. The inner salt will accumulate and dissolve, weakening the cohesiveness of the asphalt-aggregate interface and causing diseases such as spalling and pitting. In addition, the seasonal freeze-thaw cycle causes early damage to the asphalt mixture. Admixture is an effective means of improving the performance of porous asphalt mixtures. Efforts done by previous researchers have shown that ferrocyanide can inhibit salt crystallization and reduce salt erosion damage of porous materials. Basalt fiber and anti-stripping agent can improve the service performance of asphalt mixture. However, the effects of three additives on salt erosion and freeze-thaw coupling environments have not been studied, and their specific improvement effects are unclear.
This paper focuses on the damage resistance of asphalt mixture with crystallization inhibitor, basalt fiber and anti-spalling agent under salt erosion and freeze-thaw, respectively. The splitting tensile strength of asphalt mixtures with additives was tested after 15 cycles of salt erosion and freeze-thaw. We used X-ray computed tomography to analyze the initial internal structure after 0, 7, and 20 freeze-thaw cycles, as well as salt erosion. The effects of salt erosion and freeze-thaw cycles on asphalt mixtures with additives were evaluated through the analysis of changes in strength and internal structure. Based on the changes in internal structure, the performance enhancement of porous asphalt mixtures with additives was assessed using grey relation analysis and analytic hierarchy process analysis.
Results showed that the damage caused by salt spray erosion on the mechanical properties of asphalt mixture is greater than that of salt solution erosion. Compared to the AC-13 asphalt mixture, the SMA-13 asphalt mixture has better mechanical properties against the effects of freeze-thaw cycles and salt erosion. The performance improvement of asphalt mixture with a crystallization inhibitor is better than that of an anti-stripping agent and a basalt fiber asphalt mixture, respectively. The three types of additives only retard the evolution of internal structure and do not change the damaged formation of internal structure inside asphalt mixture under freeze-thaw cycles and salt erosion. The internal damage index of asphalt mixture with crystallization inhibitor is the minimum, indicating good resistance to freeze-thaw cycles and salt erosion. The combination of SMA-13 gradation and crystallization inhibitor was found to be suitable for designing asphalt mixtures in coastal seasonal frozen regions. The research results will help improve the level of construction and maintenance of asphalt pavement in coastal seasonal freezing areas, extend its service life, and save on maintenance costs.

Speaker: Weidong Ji

09:25 Experimental and theoretical study of unsaturated flow in fractured media

Unsaturated flow in fractured media is an important process with relevance to a large number of industrial and environmental application. In this work, we report recent experimental and theoretical investigations on unsaturated flow in single fractures, fracture intersections, and fracture networks. Wo focus on how small-scale flow physics influences the spatial and temporal characteristics of unsaturated flow in discrete fracture networks. We propose theoretical models for predicting water splitting at fracture intersections and for predicting water breakthrough time in an unsaturated fracture network. We validate these models by comparing with experimental observations. We show that the breakthrough time in a fracture network decreases with the increase of initial saturation. We also find that avalanche infiltration mode, i.e., sudden release of a large amount of water from the network, emerges spontaneously in the network, and is modulated by the local splitting behavior. We further show that the power spectral density of the water saturation time series in the network follows a power law with an exponent of −2 for all simulations with different structural parameters and local flow rules, suggesting a universal self-organized criticality behavior for unsaturated flow in fractured rocks.

Speaker: Zhibing Yang (Wuhan University)

09:25 Experimental evaluation of dynamic seepage in tight/shale reservoirs under the coupling of matrix fractures based on NMR

Meng Du1,2,3, Shuyi Lu4, Zhengming Yang*1,2,3, Weifeng Lyu1,2,3, Xinliang Chen2,3, Xiang Qi 3, Pengwei Fang 1,3, Zhuoying Dou 1,3
(1. University of Chinese Academy of Sciences, Beijing 100049, China;2. Institute of Porous Flow & Fluid Mechanics, Chinese Academy of Sciences, Langfang 065007, China; 3. Research Institute of Petroleum Exploration & Development, PetroChina, Beijing 100083, China; 4. Beijing Normal University, Beijing 100875; 5. State Key Laboratory of Enhanced Oil Recovery, Beijing 100083, China)

The imbibition and displacement between fractures and matrix have a significant effect on the development of tight/shale reservoirs, a combination of dynamic displacement and imbibition online physical simulation method was established by integrating nuclear magnetic resonance (NMR) and CT scanning. Through real-time dynamic monitoring of multiphase flow and migration behavior of crude oil in each stage of dynamic imbibition, the development effect of dynamic imbibition and the micro-production mechanism of pore throats with different sizes of tight/shale oil were quantitatively studied. The effects of displacement pressure, permeability, and fractures on the dynamic imbibition effect and pore crude oil production were analyzed. On this basis, the dynamic seepage process of fracking-soaking-backflow-production integration was simulated, which reveals the dynamic production characteristics of different development stages and their contribution to enhancing oil recovery (EOR). The results show that the dynamic imbibition process of tight/shale oil water flooding can be divided into three stages: strong displacement and weak imbibition stage of rapid production of large pores and fractures under displacement action; weak displacement and strong imbibition stage of slow production of small pores and fractures under counter-current imbibition action and dynamic equilibrium stage of weak displacement and weak imbibition. The greater the displacement pressure, the lower the degree of imbibition recovery and the stronger the contribution of displacement, but it is easy to produce water channeling, leading to an early breakthrough, as a result, the recovery increases and then decreases. The higher the permeability and the better the pore throat connectivity, the greater the degree of both imbibition and displacement recovery, and the shorter the percolation equilibrium time and the greater the recovery. Fractures can effectively increase the imbibition contact area between the matrix and water, reduce the resistance of oil and water seepage, and increase the rate of matrix oil release and total recovery. There are differences in dynamic production characteristics and the degree of contribution to recovery at different development stages. Conducting a soaking program after fracturing is beneficial for fully utilizing the effects of fluid imbibition, displacement, and energy storage; also, the key to EOR is to effectively utilize the carrying effect of the backflow fluid and the displacement during the production stage. This study provides theoretical support for the efficient development of tight/shale oil.

Speaker: Dr Meng Du

09:25 Flow characteristics of oil and water in low-salinity water flooding within porous media - Influence of polar component content of crude oil on microscopic displacement efficiency

This study employs microscopic imaging equipment to observe the low-salinity effect occurring in porous media during the process of low-salinity water flooding with different polar component contents of crude oil. The research describes the oil-water transport behavior and changes in pore occupancy, which is influenced by wettability and interfacial tension changes within the porous media. Low-salinity water exhibits a favorable enhancement in wetting behavior and displacement efficiency for crude oil with high polar component content. Crude oil with a high polar component content demonstrates a stronger oil-wetting tendency on the surface of the porous media. Upon injection of low-salinity water, improvements in contact angle, curvature, and capillary forces are observed within the porous media, leading to reduced oil displacement resistance. Low-salinity water invades smaller pores and throats, decreasing the proportion of pore space occupied by oil. Oil within smaller pores is displaced, thus enhancing the microscopic displacement efficiency of the pores. However, the positive effects of low-salinity water are less pronounced for crude oil with low polar component content. The porous media surface demonstrates weaker oil-wetting tendencies for crude oil with low polar component content, resulting in minor changes in contact angle, curvature, and capillary forces upon low-salinity water injection. Low-salinity water tends to form water microdispersions with crude oil containing low polar components. These microdispersions redistribute from smaller to larger pores, moving toward the outlet end. Ultimately, the injected water occupies nearly the entire pore space, leading to an improvement in microscopic displacement efficiency.

Speaker: Yuting HE

09:25 IMPACT OF DUAL POROSITY SYSTEMS ON FLOW IN HEAP LEACHING USING MICRO COMPUTED TOMOGRAPHY IMAGING

The global progress with the energy transition from fossil fuels to renewable energy has boosted the demand for metals. Copper, amongst all metal resources, is regarded as an essential raw material in producing the conduit to reduce the energy needed during electricity production. Most of the low-grade copper is recovered from heap leaching, which is a well-established hydrometallurgical method.
However, a low recovery remains a significant challenge of this method. This poor leaching performance is caused by the variation of the leaching kinetics driven by not only the leaching fluid transport at the particle scale but also the mass transport at the grain scale. Previous studies have implemented a collection of numerical and experimental methods to investigate the leaching performance under a variety of scales and leaching conditions but rarely investigated the process using a multiscale approach.
Herein, we implemented a fundametal study the flow behaviour in a dual porosity system, which is by visualising the fluid transport and measuring the liquid contents under the particle and grain scale. A series of leaching experiments is conducted using water with packed glass beads and chalcopyrite beads. We image the column in regular periods under Micro Computed Tomography (Micro-CT) imaging over several days of the leaching period. We label and track mineral grains from high-resolution images and monitor the alternation of the mineral size and porous media structure. Our study shows the impact of dual porosity systems on flow patterns and the performance of leaching on mineral grain within different particles. Our results highlight the importance of multiscale simulation for the design and optimisation of heap leaching.
Keywords: Heap leaching, dual-porosity, Micro-CT, column test

Speaker: Quan Zheng (Mr)

09:25 Inferring electrochemical performance and parameters of Li-ion batteries based on deep operator networks

Li-ion battery is a complex physicochemical system that generally takes observable current and terminal voltage as input and output, while leaving some unobservable quantities, e.g., Li-ion concentration, for serving as internal variables (states) of the system. On-line estimation for the unobservable states plays a key role in battery management system since they reflect battery safety and degradation conditions. Several kinds of models that map from current to voltage have been established for state estimation, such as accurate but inefficient physics-based models, and efficient but sometimes inaccurate equivalent circuit and black-box models. To realize accuracy and efficiency simultaneously in battery modeling, we propose to build a data-driven surrogate for a battery system while incorporating the underlying physics as constraints. In this work, we innovatively treat the functional mapping from current curve to terminal voltage as a composite of operators, which is approximated by the powerful deep operator network (DeepONet). Its learning capability is firstly verified through a predictive test for Li-ion concentration at two electrodes. In this experiment, the physics-informed DeepONet is found to be more robust than the purely data-driven DeepONet, especially in temporal extrapolation scenarios. A composite surrogate is then constructed for mapping current curve and solid diffusivity to terminal voltage with three operator networks, in which two parallel physics-informed DeepONets are firstly used to predict Li-ion concentration at two electrodes, and then based on their surface values, a DeepONet is built to give terminal voltage predictions. Since the surrogate is differentiable anywhere, it is endowed with the ability to learn from data directly, which was validated by using terminal voltage measurements to estimate input parameters. The proposed surrogate built upon operator networks possesses great potential to be applied in on-board scenarios, since it integrates efficiency and accuracy by incorporating underlying physics, and also leaves an interface for model refinement through a totally differentiable model structure.

Speaker: Qiang Zheng

09:25 Integration of Digital Core and Molecular Simulation for Research on Reservoir Mechanical Properties

The mechanical parameters of reservoir rocks play a crucial role in the evaluation of unconventional reservoirs. However, due to time and cost constraints, conducting rock mechanics experiments on all formations is not feasible. Furthermore, conventional testing methods may not accurately characterize and test rocks with complex micro-structures, such as tight sandstones and shales, where pore-throat connectivity is intricate. Therefore, this study proposes a multi-scale coupled simulation approach for reservoir rock mechanical parameters. Firstly, digital core models were constructed through CT scans of four core samples obtained from the Shengli oilfield. The analysis of thin section observations, combined with the machine learning approach of random forest, was used to classify mineral phases in the cores, such as Feldspar, Quartz, Mica, and Calcite. These mineral phases were well distinguished within the core. Subsequently, crystal lattice models of these minerals were established at the molecular scale, and mechanical parameter simulations based on molecular modeling were performed. The finite difference method was employed to calculate the stress under various strain states, resulting in the Young's modulus and Poisson's ratio for each mineral component. At the core scale, finite element simulation of uniaxial compression tests was conducted using the mechanical parameters obtained from molecular simulations, to calculate the Young's modulus and Poisson's ratio of the entire core. The model established by this method accurately reflects the fine structure and heterogeneity of the rocks, thus improving the simulation accuracy and faithfully representing the mechanical behavior of rocks in experiments. Comparison with actual uniaxial compression test results indicates an average Young's modulus error of 2.44 GPa and an average Poisson's ratio error of 0.036, demonstrating that this simulation method effectively predicts rock mechanical properties, reduces the time and cost required for experiments, and retains the majority of the accuracy of the results obtained.

Speaker: Mr Yifan Yin (s22020114@s.upc.edu.cn)

09:25 Investigation of single particle crushing characteristics considering non-spherical shape based on DEM

The evaluation of fracture construction processes hinges on the critical factors of conductivity and the validity period of artificial fractures. It is imperative not to overlook the conductivity damage resulting from the crushing of proppant particles. Being a specialized geotechnical granular material, proppant particles undergo fragmentation when the applied compressive load surpasses their bearing capacity. The smallest unit in breakage behavior, the single particle, serves as the foundation for pertinent mechanical research.
Quartz-sand proppant particles pose a challenge for classical theories due to their complex structures and irregular shapes. Existing studies often neglect the intricate structural shape of the proppant and the complex stress environment in the reservoir, opting instead for investigations based on regularly shaped particles. This study delves into the crushing behavior of irregularly shaped quartz sand single particles, determining the critical conditions of single-particle breakage through a combined approach of numerical simulation and experiments. A discrete element model (DEM) for the crushing of quartz sand single-particles under closure pressure and confining pressure was established. The analysis of crushing characteristics involves examining the dynamic distribution of the crushing belt and stress-strain curves. Additionally, the primary controlling factor influencing the crushing behavior of single particles is investigated.
The results reveal a unimodal distribution in the stress-strain curve for proppant particles. Smaller particle sizes correspond to higher effective peak values of fragmentation and smaller strains. Specifically, under consistent parameter conditions, 40–70 mesh quartz sand particles exhibit stress peaks over twice as high as those of 8–16 mesh particles. Larger particle sizes harbor a greater number of internal natural cracks and defects, thereby diminishing the particles' bearing capacity. The influence of particle sphericity on crushing patterns and crack locations is governed by the mode of contact between particles and the wall surface. Particles with high roundness are more likely to be broken into two parts. Concurrently, as particle irregularity intensifies, secondary cracks emanate within the particles prior to complete fragmentation, resulting in a stress-strain curve exhibiting a multi-peak distribution. For a consistent 8–16 mesh of quartz sand particles, the peak crushing force under conditions of high roundness surpasses that under conditions of low roundness by approximately 15 N. Notably, the crushing strain is significantly greater, nearly 10%, for small-sized particles compared to large-sized particles under conditions of low sphericity, whereas this difference diminishes to 1.8% under conditions of high sphericity. The experimental approach was used to validate the simulation results, immensely contributing to providing theoretical underpinnings for the application and optimization of proppants.

Speaker: Dr Xiangyu Wang (School of Petroleum Engineering, China University of Petroleum (East China))

09:25 Lattice Boltzmann Simulations for Pore-Scale Interactions during the drying of capillary porous media under Convection-Diffusion drying conditions

One of the major challenges faced during the analysis of the drying process is the problem of accurate determination of fluid movement within the narrow void spaces within the porous medium, the effects of which are critical for the overall drying kinetics. As the intricate nature of porous media precludes experimentation, numerical methods are gaining traction for modeling the fluid movement and capturing its effects on the overall drying process. Of the various numerical modeling techniques, the Lattice Boltzmann Method (LBM) has emerged as a powerful tool in recent times due to its strengths of scalability, interface tracking, and multiphase implementations. This study aims to use a Lattice Boltzmann Model to investigate the pore-scale phenomena that can occur during the drying of a capillary porous medium under both diffusive drying conditions and in the presence of convective airflow and determine the effects of these pore-scale phenomena over the overall drying process.

Speaker: Mr Dasika Prabhat Sourya (Department of Chemical Engineering, Birla Institute of Technology, Pilani Hyderabad Campus, India)

09:25 Microscopic damage rules of water flooding in ultra-low permeability reservoir: an experimental study based on the combination of microfluidic and low-field NMR technology

Water flooding is one of the important ways of oilfield development in China. However, due to the poor-compatibility between injected water and reservoir rocks and fluids, free particles such as inorganic scale and rock clay often block the pores and throats under the carry-over effect of water seepage, which leads to engineering problems such as water injection pressure increasing, underinjection of injection-wells and decreased oil production capability of production-wells. Conventional core experiments and numerical simulations were used to study the damage induced by water injection. Since the black-box nature of the core, researchers cannot observe the fluid flow rules in porous media, nor can they know the specific location and degree of core damage. Although the numerical simulation method can simulate the scale formation and the occurrence of scale particles, it ignores the real situation of scale particles being carried and moved by fluid, and can not obtain the real rules of water flooding damage to the reservoir.
Considering the shortcomings of previous studies, we combined low-field NMR and microfluidic techniques to explore the damage rules of injected water to the core of an ultra-low permeability reservoir in northwest of China. Firstly, low-field NMR online displacement technology was used to detect the signal intensity changes of the core along the axial direction, as well as the pores of various sizes during the water flooding process, and we obtained the injury rules of the core at different locations during the water flooding process. Further, we used μ-CT to scan the core slice and obtain its pore distribution information, and etched it on the glass chip for displacement experiment, and observed the damage rules of the scale particles generated by the combination of injected water and formation water on the porous media in real time.
It is found that free particles are selective to reservoir damage. Due to the low-resistance flow characteristic of fluid, free particles will be carried by fluid to the micro-fractures and large pores, causing greater damage. This kind of damage has mobile characteristics, free particles will be carried to the center and tail end of the core, and increase the blockage these parts over time. The microfluidic experiment further confirmed the rules obtained by low-field NMR method, and the accumulation of scale particles in the middle and rear of the chip was also found in the microfluidic displacement experiment. The particles size of these areas continues to increase, which increases the damage to the middle and rear of the reservoir, blocks the flow channel of the production wells, and seriously reduces the swept efficiency of the displacement phase.

Speaker: Dr Yiping Wen (Institute of Rock and Soil Mechanics, Chinese Academy of Sciences)

09:25 Microscopic mechanism investigation of counter-current imbibition in tight reservoirs using the Lattice Boltzmann method

Tight oil reservoirs are typically developed through hydraulic fracturing to create a network of fractures, with counter-current imbibition between fractures and matrix playing a crucial role. However, during the counter-current imbibition process, as water displaces oil, it increases water saturation and leads to water blocking phenomena, resulting in reduced oil relative permeability and heightened flow resistance in the oil phase. The oil relative permeability is pivotal in determining the matrix's ability to elastically expel oil, rendering counter-current imbibition with both advantages and disadvantages. To quantitatively characterize the damage caused by counter-current imbibition in tight reservoirs, we employed the lattice Boltzmann method to simulate counter-current spontaneous imbibition in Jimsar tight rocks. We also introduced a novel method for assessing reservoir damage: the water-to-solid transformation method.

During counter-current imbibition, the water phase occupies the flow space of the oil phase, acting as a solid, consequently diminishing the oil's flow capacity. Given the challenge of calculating the relative permeability of two phases during counter-current imbibition, we transformed the water phase into a solid phase to construct a new digital core. This transformation allowed for the computation of unidirectional permeability, which was then used to characterize the reduction in oil relative permeability during counter-current imbibition. The study elucidates that the reduction in oil relative permeability in the digital core of Jimsar during counter-current imbibition is limited, ultimately establishing a relatively stable oil flow channel. This method facilitates the evaluation of the effectiveness of counter-current imbibition in reservoirs, enabling the implementation of appropriate improvement measures. Furthermore, a comparison between counter-current and co-current imbibition indicates that the water phase in counter-current imbibition only affects the oil phase near the fracture, without reaching the interior of the matrix. Nevertheless, the imbibition front of counter-current imbibition remains relatively stable, without significant fingering.

Speaker: Prof. Shuyang Liu (China University of Petroleum (East China))

09:25 MODELING OF RESERVOIR OIL VISCOSITY DISTRIBUTION BASED ON MACHINE LEARNING TECHNOLOGY

Assessing production capabilities and effectively developing oil reserves requires an understanding of changes in fluid properties. Oil viscosity has a significant impact on oil recovery when developing hard-to-recover reserves. For oil deposits for a number of objects, the density, viscosity, content of asphalt-resinous substances, paraffin and sulfur increase as the depth of the formation increases, i.e. from the arch to the wings and from the roof to the sole. The viscosity value is used when choosing development technology, methods for intensifying production, and correctly solving systems of equations when constructing a hydrodynamic model.
The first task of this work is to develop a methodology for determining viscosity based on the results of integrating GIS and studies of oil samples based on the use of neural networks.
The formation of highly viscous hydrocarbons is associated with the processes of anaerobic oxidation of oil and dissolution of reservoir rocks. The intensity of these reactions is maximum at the level of contact with water (on the surface of the clean water surface) and decreases upward towards the roof of the deposit as water penetrates and rises above the contact surface.
A model was created using neural networks using two methods, taking into account intrinsic polarization potentials (PS) and the gamma GK method. The results of field studies of 32 wells with a full range of well logging and analysis of formation fluid samples were taken as initial data.
The use of the obtained forecast values made it possible to simulate and obtain three-dimensional viscosity distributions throughout the entire volume of the deposit using a 3D model.
The processes that contribute to the hydrophobization of reservoirs are considered, and an analysis of the change in viscosity over the area is carried out using the construction of a three-dimensional geological model and along the section. When analyzing changes in dynamic viscosity along the section and accumulated correlation coefficients for electrical resistivity and water saturation coefficient, zones of extreme saturation, the level of the clean water table were identified and described, the level of paleocontact location (oil-water) and the boundaries of hydrocarbon migration cycles were identified.
The use of approaches based on neural networks made it possible to obtain an understanding of the change in viscosity, build a 3D geological model, analyze the change in viscosity with depth, systematize the main processes of increasing viscosity and the associated causes of reservoir hydrophobization.
The reported study was partially supported by the Government of Perm Krai, research project No. СЭД-26-08-08-30 from 24.01.2024

Speaker: Irina Poplygina

09:25 Multi-scale Pore Structure Characteristics of Deep Marine Shale and Its Controlling on Gas Transport Mode: Silurian Longmaxi Formation in Southern Sichuan, China

The attributes of shale pore structure govern the accumulation, presence, and dissipation of gas. Deep marine shale undergo intricate geological evolution, with pore development at the nanoscale. Consequently, quantifying the impact of deep shale pore structure on gas is challenging. In this paper, the microscopic storage space structure of deep shale is quantified, and the correlation between pore structure and mode of gas transport is established. The study focused on the Silurian Longmaxi Formation shale, utilizing techniques such as SEM, CO2 and N2 adsorption, HPMI, and the Frenkel-Halsey-Hill method approach to quantify the development characteristics and controlling factors of pores at multiscale. Based on the pore structure, fractal, and molecular dynamics of methane, the numerical correlation linking pore structure and gas transportation mechanisms was established. The results indicate that the deep marine shale formations are predominantly composed of ORSS and ORMS. The evolution of pores is impacted by the TOC content and mineral composition. Based on the governing function of pore structure in gas transport mechanisms, the pores can be classified into three categories: ultramicro adsorption pore, nano-diffusion pore, and micro-nano flow-diffusion pore. Correspondingly, there are five types of gas transport modes: surface adsorption diffusion, Knudsen diffusion, Fick diffusion, slip flow, and continuously flow. These diverse modes collectively form a complex gas transport network. Deep shale exhibits a greater abundance of micropores and mesopores compared to shallow shale. The contribution of micro-fractures to shallow shale gas transport is crucial, and the contribution to deep shale decreases significantly. In conclusion, the favorable exploration lies in targeting ORSS formations with low D1 (fractal dimension) and high D2 (fractal dimension), as well as ORMS segments with high D1 and high D2. Specifically, within hydrocarbon-rich basins located below 3500 m, it is recommended to search for overpressure regions with weak structural deformation. These areas hold potential for successful gas exploration. This research establishes a basis for the exploration, development, and geological principles of deep shale gas.

Speaker: Shijie He (China University of Petroleum-Beijing)

09:25 Multiphase Flow Through Rough Porous Layers in Proton-Exchange Membrane Fuel Cells (PEMFCs)

Polymer electrolyte membrane fuel cells (PEMFCs) have emerged as ideal energy-conversion devices for hydrogen energy applications. The performance of PEMFCs is significantly affected by the accumulation and transport of water inside porous components and flow channels. Here, we focus on investigating the role of surface roughness on the fluid transport and droplet impact behaviours in the porous components of PEMFC. We start by examining the fluid transport characteristics at the interfacial region of microporous layer (MPL) and catalyst layer (CL), considering the effects of compression stress, porosity, and wettability. Liquid and gas permeabilities are also investigated to assess water drainage and fuel supply efficiency with different compression conditions. Then, surface roughness effects of gas diffusion layer (GDL) on liquid droplet removal inside a flow channel are investigated. We simulated the complete process of droplet removal in flow channel, including emergence, growth, detachment, and removal. We also identified different regimes of detachment modes based on the droplet breakup location and detachment ratio. Finally, we experimentally examined the liquid droplet impact dynamics on rough surfaces with various topological parameters. We observed different modes of droplet spreading and bouncing behaviour, and droplet impact outcome transition from bouncing to no bouncing is identified. To quantify the influence of surface wetting area on the bouncing-wetting transition, we proposed a modified Weber number that incorporates a combined effect of droplet kinetic energy, surface energy, and adhesion force. We found that the droplet impact outcomes in the transition regime can be accurately described by a single curve as a function of the modified Weber number. The results can provide valuable insights into selecting appropriate parameters of diffusion media for optimising water management and fuel supply during fuel cell operation processes.

Speaker: Yixiang Gan (The University of Sydney)

09:25 Neural Operator Predictions of Electrical Properties in Porous Media

The characterization of electrical transport properties through porous media is commonly used for reservoir formation evaluation, groundwater management, mineral exploration, and carbon capture and storage (CCUS) monitoring. We discuss image-based characterization and prediction of a range of transport properties including, but not limited to, flow/momentum transport, mass transport as well as electrical properties, often in the presence of multiple fluid phases. We then present novel data science methods and their impacts on prediction speed and accuracy. The data used in this work is openly available as part of a benchmark dataset that includes complete geometric characterization and simulations hosted on Digital Rocks Portal1.

Deep learning (DL) has emerged to be a powerful tool for modeling these transport properties while reducing computation time by several orders of magnitude. Previously, we have applied convolutional neural networks (CNNs) to predict the electric potential field given a segmented x-ray microtomographic image. We found that the set of input features used to predict momentum and mass transport properties did not translate well to electrical transport and had to be redesigned. We further found that because classical DL networks (including CNNs) typically provide a mapping between Euclidean spaces (e.g. image vector-to-scalar quantity, image vector-to-image vector, etc.), they effectively only learning a single instance of the governing equation. If the discretization of the partial differential equation (PDE) changes, the model needs to be retrained or can otherwise lead to issues when applying the model to new domains. Here, we present new work on overcoming that limitation by training neural operators.

Neural operators are a new subclass of scientific machine learning in which data-driven models learn mappings between function spaces, thus learning entire families of PDEs. Here, we apply a Fourier neural operator network to predict the electric potential through a 3D porous medium and contrast them to classical convolutional neural networks (CNNs). The results show improved accuracy over previously trained CNNs, particularly when introducing new types of porous media. Further, we recognize that training a neural operator network typically requires large amounts of high-fidelity data, and despite the existence of open data portals, such as Digital Rocks Portal, this is nevertheless a bottleneck. To address this, we explore the development of a multiscale neural operator network. We expect that the initial time-intensive training will be compensated by its ability to generalize to new parameterizations and other transport problems in porous media.

Speaker: Bernard Chang (The University of Texas at Austin)

09:25 Novel Learning-based Pattern-Data-Driven Forecast Approach for Predicting Future Well Responses

Accurately predicting future well response is crucial for making investment decisions in developing subsurface reservoir resources. Future well responses have been forecasted using history-matching methods, but traditional history-matching methods often incur high computational costs in calibration steps and have difficulties in maintaining geological constraints. Recently, data-driven forecast methods like data-space inversion (DSI) and learning-based data-driven forecast approach (LDFA) have been introduced to mitigate the computation cost and geological constraint issues of history-matching methods. However, DSI and LDFA have extrapolation, conditioning, and prediction variance issues. In this study, we propose two simple approaches, a learning-based pattern-data-driven forecast approach (LPFA) and an ensemble conditioning step (ECS), to resolve the issues associated with DSI and LDFA. For the extrapolation issue, LPFA provides accurate predictions by scaling prior data using observed data, even when the observed data are outside the prior data range. ECS resolves the conditioning and variance issues of LDFA and LPFA by selecting the predictions of ensemble learning that honor the observed data. The prediction performances of DSI, LDFA, LPFA, and ECS are compared using two well-known benchmark models (Brugge and Olympus models). All the forecast approaches showed reliable performance in predicting future well responses, achieving an average median relative error of 2~3% under a 2% noise level of the observed data. However, LPFA was the only approach that provided the most accurate predictions for future well responses when the prior data did not contain data close to the observed data. ECS improved the prediction performances of LDFA and LPFA in both the Brugge and Olympus models as it selects only the predictions from multiple learning models honoring the observed data.

Speaker: Yeongju Kim

09:25 Numerical simulation of compositional compressible two-phase flow in heterogeneous reservoirs

Numerical modelling of multiphase multicomponent flow in porous media is significantly important for many engineering practices, such as CO2 geological storage, natural gas recovery. In order to improve the understanding of compressible two-phase flow behavior in porous media, this work presents a fully coupled model for multicomponent compressible two-phase flow in porous media. The element-based finite volume is used for numerical solutions. Different previous numerical model, the capillary pressure and gas species concentrations are selected as the primary variables. The numerical model is verified by comparing the numerical results against the benchmarks. And then the developed model is employed to investigate the flow behavior during CO2 injection into geological formations for sequestration. Particularly, the reservoir heterogeneity effect is highlighted through comparing to homogeneous cases. The results indicate that the reservoir heterogeneity effect on the fluid flow is significant, which should be considered when designing the CO2 storage in subsurface formations.

Speaker: Min Chen (Tongji University)

09:25 Numerical simulation of sand bed stability near the wellbore during the flowback of supercritical CO2

The destabilization of the sand bed during flowback results in the closure of fractures near the wellbore. Furthermore, the density and viscosity of supercritical CO2 (Sc-CO2) are significantly influenced by the formation temperature and pressure, exerting a substantial impact on the flowback process. This study employs a coupled CFD–DEM model, validated through experimental data, and integrates a heat transfer model to analyze the stability of sand beds in Sc-CO2 fracturing. The findings delineate the flowback stage into three phases: translation-controlled, rolling-controlled, and stable. Sand bed stability is discernibly influenced by fluid drag force, inter-particle contact force, and the bed shape pre-flowback. Lower flowback rates, larger proppant sizes, and higher fluid temperatures enhance stability by reducing the drag force, while increased closed fracture width enhances stability by augmenting the inter-particle contact force. Additionally, a longer sand bed and a bed front characterized by a higher inclination angle and curved zone enhance stability. Notably, the reduction of inter-particle contact force during flowback may turn a stable proppant pack unstable.

Speaker: Mr Boyu Liu (china university of petroleum (east china))

09:25 Oscillation Method for Measuring Gas Storage in MCM-41

The total storage of gas in a mesoporous material MCM-41 with adsorption/capillary condensation was measured using a new oscillation-based method. With an improved setup and procedure, the accuracy of the measured isotherm was significantly improved. Experiments were conducted using both condensable (propane and carbon dioxide) and non-condensable (argon and methane) gases. The results show that this method can be used to measure not only the total storage of gas but also the excess due to adsorption/capillary condensation with considerable accuracy. In experiments conducted with propane, the occurrence of capillary condensation, which increased the total storage of gas, was well depicted.

Speaker: Xiaolong Yin (Eastern Institute of Technology, Ningbo)

09:25 Pore-scale and Reservoir-scale Investigations on H2 Trapping: Impact of Temperature and Salinity

Underground H2 storage is arguably considered one of the promising techniques to achieve net-zero emissions goals. The storage of H2 in geological formations is influenced by a complex function of the physicochemical, petrophysical, and geo-mechanical characteristics of the H2/brine/rock system. This results in the existence of different trapping mechanisms (e.g., residual and dissolution trapping), which will lead to the loss of H2 within the formation. Therefore, it is important to understand the trapping of H2 at different scales to provide a better understanding of the H2 withdrawal efficiency.

To this end, contact angles and interfacial tensions of the H2/brine/sandstone at different temperatures and salinities were collected for the pore network modeling to investigate the pore-scale H2 trapping behaviors. The obtained results were then fitted using the Land trapping model. Subsequently, these trapping behaviors and different H2/brine properties, including density, viscosity, and H2 solubility under different conditions, were then considered in the field-scale simulations. One single injection and production well and four annual injection-withdrawal cycles were considered. The results indicate that a higher temperature leads to less residual trapping in both pore-scale and reservoir scale. The higher temperature and higher salinity conditions are more favorable for H2 production (i.e., a higher H2 recovery factor). In addition, the H2 dissolution trapping is also influenced by the temperature and salinity, which contribute to a maximum of ~5% H2 loss. Furthermore, the H2 plume migrations are also influenced by different temperature/salinity conditions.

Speaker: Mr Haiyang Zhang (Chemical and Petroleum Engineering Department, Khalifa University)

09:25 Pore-scale Modeling and Numerical Simulation for Viscoelastic Emulsion Flow

In this study, a body force driven two-phase fluid flow in porous media is numerically simulated by weakly compressible smoothed particle hydrodynamics, a Lagrangian mesh free particle method. The dispersed phase consists of viscoelastic emulsive droplets and is assumed to obey Oldroyd-B rheological model. The background phase is a Newtonian fluid. The interfacial tension between two phases and the wettability between fluids and solid boundaries are evaluated by pairwise force model. Different flow velocity, viscosity ratio and Weissenberg number are investigated. All simulations are implemented on GPU to achieve high efficiency.

Speaker: Haoran Cheng (Qingdao University of Science & Technology)

09:25 Promoting Ultra-High-Density Nanoparticles Exsolution in Layered Perovskite Ferrites via a Facile Cobalt Doping Method: A High-Performance, Stable Anode for Direct Ethane Solid Oxide Fuel Cells

Nanoparticles anchored on the perovskite surface have gained considerable attention for their wide-ranging applications in heterogeneous catalysis and energy conversion due to their robust and integrated structural configuration. Herein, we employ controlled Co doping to effectively enhance the nanoparticle exsolution process in layered perovskite ferrites materials. CoFe alloy nanoparticles with ultra-high-density are exsolved on the (PrBa)0.95(Fe0.8Co0.1Nb0.1)2O5+δ (PBFCN0.1) surface under reducing atmosphere, providing significant amounts of reaction sites and good durability for hydrocarbon catalysis. The morphology evolution measurements reveal a significant transform in CoFe alloy nanoparticles at around 600 °C, transforming from larger to ultra-densely decorated smaller nanoparticles. A single cell with PBFCN0.1 anode exhibits high performance in wet ethane atmosphere (e.g., a typical peak power density of 455 mW cm−2 at 800 °C), which is significantly improved by 36%-70% compared to the sample without Co doping. This discovery emphasizes how temperature influences alloy nanoparticles exsolution within doped layered perovskite ferrites materials, paving the way for more targeted material-specific research and broadening the spectrum of practical applications.

Speaker: Mr Rubao Zhao (Shenzhen University)

09:25 Quantitative evaluation of shale pore structure based on large-view Mosaic scanning electron microscopy A case study of Longmaxi Formation reservoir in deep Luzhou to southern Sichuan

At present, the global energy structure has gradually entered a critical period of transition from fossil energy to new energy. Natural gas, as a clean and low-carbon fossil energy, is a bridge in the energy transition stage, and shale gas, as an important component of natural gas, is an indispensable part of the future growth of the natural gas industry. Luzhou block is an important shale gas development in Sichuan Basin, in which Longmaxi Formation is the main shale gas exploration and development interval in Luzhou block, the main buried depth is between 3500~4200m. The overall porosity of this set of shale is low, ranging from 4.0% to 5.5%, so it is very important to carry out detailed research on shale pore structure for shale gas high yield. In this study, through an optimized scanning electron microscope technology based on large-field stitching, thousands of small scanning electron microscope images with adjacent matrix arrangement are collected and then combined with image processing technology, the digital image pixels can be expanded to more than 50,000 × 50,000, which can effectively identify and count organic and inorganic pores in shale. Greatly reduce the space-time complexity of the algorithm. The analysis results show that the shale pore types include organic pores, organic fractures, inorganic pores and inorganic fractures, and the side length of the characterization field of organic pores is about 3μm. The side length of the characterization field of inorganic pores is more than 5μm, and the diameter opening of organic pores in the areas detected by the images is mostly between 20 and 200nm, and the maximum opening of inorganic pores is more than 300nm. The organic pores are highly developed and dense, and the pore diameter is small, but they contribute a lot to the shale reservoir space and have certain connectivity. The inorganic pore has some contribution to the storage space, but the influence is small. The development degree of organic and inorganic joints is low, but they have great influence on the seepage capacity of fluid.

Speaker: Bo Li (Shale Gas Research Institute, PetroChina Southwest Oil & Gasfield Company)

09:25 Reactivity of porous media under continuous injection

High flow rates within reactive porous media occur both in industrial applications and in natural media, e.g. in permeable soil substrates subjected to extreme weather events [1,2]. The reactive surfaces of the soil grains interact with the transported species, determining the overall porous media reactivity and capacity of retaining nutrient and contaminants. We show via pore-scale lattice-Boltzmann simulations in a packed bed column that, under the conditions of uniform injection, the uniformity of porous surface reactions is determined by the mixing of the low concentration wakes forming behind the reactive soil grains. Scaling arguments are proposed to extract analytical models for the probability distributions of concentrations at the reactive surfaces.

Speaker: Kaj Pettersson

09:25 Research on the occurrence states of microscopic remaining oil in ultra-low permeability reservoirs

The Chang 6 reservoir represented by Wangyao Area in Ansai Oilfield is the earliest developed reservoir in Changqing Oilfield. After nearly 40 years of exploration and development, the comprehensive water cut has reached 72.8%, and the degree of geological reserves recovery is only about 17.8%. The reservoir has entered the middle and late stage of development, and the reserve-production ratio has decreased year by year, and the problems of production decline and low recovery degree have become more and more serious. The effect of conventional water flood adjustment and cyclic water flooding are not obvious. So it is necessary to use polymer injection, phlogisticated air injection and carbon dioxide injection to enhanced oil recovery. However, due to the great differences in the micro-pore structure of the reservoir, the location and shape of the micro-remaining oil are different, and the corresponding tapping methods for different types of micro-remaining oil are also significantly different. Therefore, it is necessary to carry out systematic water drive experimental research on the ultra-low permeability reservoir whose micro-remaining oil occurrence characteristics and production mechanism are not completely clear at present. In this study, the ultra-low permeability lithology reservoir of Chang 6 formation in Ansai Oilfield was taken as the research target area. By using the dynamic displacement scanning technology to obtain two-dimensional image information of micro-plunger core in different water flooding stages, and reconstruct the occurrence states of micro-remaining oil in three-dimensional pore space, and the types of micro-remaining oil were divided and quantitatively calculated according to its formation mechanism and three-dimensional structural parameters. Furthermore, the types and dynamic changes of micro-remaining oil in different water drive stages are analyzed, and the potential of micro-remaining oil in different development stages and corresponding utilization methods are defined, in order to provide theoretical guidance for the smooth implementation of water drive and tertiary oil recovery in ultra-low permeability reservoir.

Speaker: Dr Peng Chi (China University of Petroleum (East China))

09:25 Reshaping the Imaging Landscape: AI-Supercharged Swin Transformer for Unprecedented Detail

Super-resolution imaging, a transformative technique spanning various scientific disciplines, holds the potential to revolutionize our understanding of complex porous structures within the realm of porous media and modeling. Traditional imaging approaches often struggle to capture the intricate details of porous media's intricate structures. To overcome this limitation, our research employs advanced AI-driven super-resolution methods, aiming to transcend inherent resolution constraints. Our goal is to bridge the gap between large-scale imaging methods, which excel at capturing macroscopic features, and small-scale techniques known for their detailed focus. By developing techniques to reconstruct high-resolution representations from lower-resolution inputs, our study promises a profound characterization of porous media's internal architecture, critical for applications such as filtration, oil recovery, and groundwater flow.

Our research journey embarked with a meticulous exploration of AI-based super-resolution techniques. Initially, we employed the ESRGAN model with the rrdb net as the generator. While it exhibited commendable performance, the model's large size posed practical challenges. Subsequently, we transitioned to the SwinIR model, which delivered results characterized by their remarkable smoothness and sharpness. Building on this progress, we leveraged GAN-assisted Swin transformers, an approach that not only yielded exceptional outcomes but also presented a significantly reduced model size. This transition not only streamlined GPU memory usage during training but also accelerated the training process.

Our methodology included in-depth examinations of various loss functions, highlighting the significance of a hybrid approach that combines GAN loss and pixel loss. This novel approach proved instrumental in effectively training the model and enhancing the quality of super-resolution results. Throughout our research, we meticulously studied the individual impact of each loss function and established relevant metrics, providing a robust foundation for our study's methodology.

Beyond the advancements in super-resolution techniques, our research culminated in the development of a model capable of achieving super-resolution beyond current technological limitations. This breakthrough allowed us to push the boundaries of resolution in porous media imaging, and we validated our findings on new datasets with resolutions of 1μm, 4μm, and 16μm.

The results were nothing short of groundbreaking. We observed that our AI-driven super-resolution approach consistently outperformed conventional methods, producing images with unprecedented clarity and detail. Notably, our model achieved remarkable results even at resolutions previously considered unattainable. This newfound capability opens doors to a wealth of possibilities in the fields of porous media analysis, offering insights that were once hidden from view.

In conclusion, our research demonstrates the immense potential of AI-driven super-resolution in revolutionizing porous media imaging. By unveiling hidden details and pushing the boundaries of resolution, our findings hold promise for a wide range of applications, from enhancing filtration processes to optimizing oil recovery and improving our understanding of groundwater flow dynamics.

Speaker: Mr Yang Meng

09:25 Role of pore structure characteristics on the residual saturation in CO2-oil-water three-phase displacement system

CO2 injection is one of the most effective enhanced oil recovery technologies because it also sequesters CO2 in oil reservoirs to reduce greenhouse gases. In order to improve the rate of oil recovery and CO2 sequestration, it is important to study the CO2-oil-water three-phase flow mechanism. Pore structure characteristics are one of the important factors affecting the microscopic flow patterns of three-phase fluids. Under the same porosity, the difference in pore structure leads to different core permeability. We have investigated the three-phase displacement process of oil and water displaced by CO2 in a water-wet medium. The effects of different initial oil-water saturation, injection flow rate and permeability on characteristics of CO2 displacement were analysed. The effects of different influencing factors on CO2 residual saturation were studied. CO2 sequestration rate and oil recovery were evaluated for different initial oil-water saturation, capillary numbers and pore structures.

Speaker: Xianxian Lyu (东北大学)

09:25 Study on the Distribution Patterns and Resistivity Characteristics of THF Hydrates in Sandstone Sediments

Investigating the distribution patterns of hydrates in the pore spaces of sedimentary rocks and their resistivity characteristics is crucial for understanding and predicting the storage and extraction of natural gas hydrates. However, CT and resistivity joint measurements indicate that while the distribution of Tetrahydrofuran (THF) hydrates in sandstone sediments is similar to that in conventional oil and gas reservoirs, the resistivity measurements do not fully conform to the Archie model. This discrepancy arises because the formation of THF hydrates is a dynamic process which involves fluctuations in hydrate saturation, formation water salinity, temperature, and spatial distribution, making it challenging to accurately characterize these variables using traditional resistivity measurements. To address this issue and gain a deeper understanding of the complex petrophysical relationships in THF hydrate sediments, this study established digital rock based on the hydrate distribution from in-situ CT scans by segmenting the three-dimensional grayscale images of the sediments. The spatial distribution of hydrates within the sediment pores was then simulated using the Diffusion-Limited Cluster Aggregation (DLCA) model. Subsequently, the resistivity of sediments at various hydrate saturations is determined using the finite element method. The results show that at low hydrate saturations, hydrates exist in a dispersed form within the pores, while at high saturations, they are distributed in cementing or encapsulating forms, enhancing the structural integrity of the sediments. Furthermore, analysis of the aggregate morphology, including changes in gyration radius and fractal dimension, effectively reflects the evolution of the structure. The combined results from experimentation and simulation demonstrate that varying hydrate saturations significantly influence the distribution forms and their impact on resistivity: at low saturations, hydrates have a minor effect on resistivity, whereas at high saturations, extensive hydrate formation and distribution patterns lead to a rapid increase in resistivity. Overall, this study offers novel insights and methodologies for understanding the petrophysical characteristics.

Keywords：THF hydrate formation, Resistivity measurements, Digital rock, DLCA model, Finite element method.

Speaker: Mr Zizeng Li (China University of Petroleum East China)

Poster of Interpore.pdf

09:25 Synthesis of PMIA/MIL-101(Cr) composite separators with high Li+ transmission for boosting safety and electrochemical performance of lithium-ion batteries

Energy storage devices require separators with sufficient lithium-ion transfer and restrained lithium dendrite growth. Herein, PMIA separators tuned using MIL-101(Cr) (PMIA/MIL-101) were designed and fabricated by a one-step casting process. At 150 ◦C, the Cr3+ in the MIL-101(Cr)framework sheds two water molecules to form an active metal site that complexes with PF6- in the electrolyte on the solid/liquid interface, leading to improved Li+ transport. The Li+ transference number of the PMIA/MIL-101 composite separator was found to be 0.65, which is about 3 times higher than that of the pure PMIA separator (0.23). Additionally, MIL-101(Cr) can modulate the pore size and porosity of the PMIA separator, while its porous structure also functions as additional storage space for the electrolyte, enhancing the electrochemical performance of the PMIA separator. After 50 charge/discharge cycles, batteries assembled using the PMIA/MIL-101 composite separator and the PMIA separator presented a discharge specific capacity of 120.4 and 108.6 mAh/g, respectively. The battery assembled using PMIA/MIL-101 composite separator significantly outperformed both the batteries assembled from pure PMIA and commercial PP separators in terms of cycling performance at 2 C, displaying a discharge specific capacity of 1.5 times that of the battery assembled from PP separators. The chemical complexation of Cr3+ and PF6- plays a critical role to improve the electrochemical performance of the PMIA/MIL-101 composite separator. The tunability and enhanced properties of the PMIA/MIL-101 composite separator make it a promising candidate for use in energy storage devices.

Speaker: Shuaitian Jia (Hebei University of Technology)

09:25 Unraveling Heat Transfer Routes in Unsaturated Soils

Thermal conductivity is a key parameter dominating the heat transfer process in a number of engineering applications such as geothermal exploitation, borehole thermal energy storage and carbon dioxide geo-sequestration. Since soil consists of multiple phases including solid particles, gas and/or water, not only the physical properties of these phases but also the routes that they form affect the heat transfer and reflect on the value of thermal conductivity. However, the heat transfer routes have not been properly identified in existing studies, which hinders the fundamental understanding of the physical mechanisms for thermal behaviour and accurate prediction of thermal conductivity in unsaturated soils.

This work aims to identify the different types of heat transfer routes and study the contribution of each type to the effective thermal conductivity of unsaturated soils. Based on computed tomography (CT) images of five glass bead assemblies varying in degree of saturation, a series of image processing algorithms were applied to the images and identified six types of heat transfer routes: (1) particles in contact surrounded by air, (2) particles in contact surrounded by both air and water, (3) particles in contact surrounded by water, (4) separate particles connected by air, (5) separate particles connected by both water and air and (6) separate particles connected by water, respectively. In addition, the amount of each type was quantified. After reconstructing digital samples from CT images and computing their effective thermal conductivity, the contribution of each heat transfer route to the effective thermal conductivity of unsaturated soils was analysed. Results show that the contribution of types 3 and 6 increases while types 1 and 4 decrease during the increase of saturation. In addition, type 2 and 5 reach their maximum contribution when the degree of saturation is at 0.2.

Speaker: Wenbin Fei (College of Civil Engineering, Hunan University, Changsha 410082, China)

10:55 → 11:55 MS01: 2.1

10:55 Evaluating the impact of Hysteresis and Heterogeneity on Hydrogen Storage Performance in Saline Aquifers

The imperative to achieve net zero carbon emissions by 2050, aligned with global efforts to limit temperature rise, emphasizes the urgent shift to low-carbon energy sources. Hydrogen is identified as a key player in global decarbonisation however, concerns about the efficiency of hydrogen storage accompany its expanding production. This study investigates underground geological hydrogen storage in saline aquifers, emphasizing the impact of reservoir heterogeneity, flow function hysteresis, and injection/production flow rates on storage efficiency. The results show that hysteresis plays a crucial role in affecting storage efficiency, leading to significant entrapment and a lower recovery factor in initial production cycles. Reservoir heterogeneity leads to non-uniform gas movement in heterogeneous systems and as a result, the efficiency of hydrogen storage is greatly compromised. In addition, the optimal selection of production flow rates presents a challenge in balancing hydrogen recovery and water management. The study highlights the need for customized approaches, emphasizing the importance of aligning flow rates with specific reservoir characteristics for efficient large-scale hydrogen storage.
A set of simulations was conducted to investigate the influence of relative permeability hysteresis, injection/production rates, and reservoir heterogeneity (permeability) on large-scale hydrogen storage performance. The spatial continuity was established as omni-directional in the heterogeneous model and the simulation was conducted in a two-dimensional cartesian system (Figure 1). Both injectors and producers were controlled by the flow rate at reservoir conditions (0.015 PV/day), assuming the fracturing pressure would not be exceeded. The model's end simulated a large aquifer as a spill point, ensuring sufficient volume for input or output to maintain well flow rates in the gas injection and production cycles. The simulation was designed to terminate as soon as the gas reaches the spill point.
Both the homogeneous and omni-directional models exhibited similarities and differences in their hydrogen injection and production behaviour. The homogeneous system, with a consistent injection rate of 6.01305 m3/day, showed higher primary production recovery (72.56%) compared to the omni-directional system (56.60%), where high permeability in specific blocks led to rapid hydrogen advancement and more hydrogen trapping during production cycles. The second injection cycle demonstrated comparable trends in recovery factors for both systems, with the heterogeneous system achieving a slightly higher final recovery of secondary production (97.1%) compared to the omni-directional system (94%). In both systems, by decreasing the gas injection and production rates the final recovery of primary and secondary production was lowered.
Lowering the production flow rate consistently reduces the gas-water ratio in both models due to the decreased mobility difference between hydrogen and water. In the heterogeneous model, since water was displaced unevenly throughout the system (viscous fingering), the waterfront progressed faster towards the well during the production cycle. As shown in Figure 2, the waterfront eventually reaches the production well, causing a significant reduction in the gas-water ratio, particularly in the second production cycle since a smaller amount of hydrogen was injected during the second injection cycle. This dynamic transition holds substantial implications for storage operation efficiency and becomes a pivotal factor in operational decision-making.

Speaker: Mr Abdolali Mosallanezhad (Researcher)

11:10 Numerical simulation of depleted and cushion gases impacts on hydrogen storage in a depleted gas reservoir

Depleted gas reservoirs have large storage capacity, pre-proved containment security, in-place depleted gas, and well-established surface infrastructures, thus are viewed as the most feasible hydrogen storage space. However, the impacts of depletion time, volume ratio ($VR_{H_{2}:CH_{4}/CO_{2}}$) of hydrogen ($H_2$), depleted gas (mainly $CH_4$) and cushion gas (e.g., $CO_2$), and injection/withdrawal mode on hydrogen storage performance have not been systematically studied. Therefore, we examined these impacts using a numerical simulation method. The results demonstrate that: 1) As the $VR_{H_{2}:CH_{4}}$ decreases from 100% : 0 to 50% : 50%, both $H_2$ withdrawal factor ($W_{F-H_2}$) and purity ($W_{P-H_2}$) firstly increase and then decrease; during the $1^{st}$ withdrawal cycle, the highest $W_{F-H_2}$ is 42% and the smallest $W_{P-H_2}$ is 51%, both of which occur at the $VR_{H_{2}:CH_{4}}$ = 60% : 40%. 2) In case of $CO_2$ as cushion gas, $W_{F-H_2}$ and $W_{P-H_2}$ are decrease as the $VR_{H_{2}:CO_{2}}$ increases from 50% : 50% to 25% : 75%; during the $1^{st}$ withdrawal cycle, the highest $W_{F-H_2}$ is 38% and the smallest $W_{P-H_2}$ is 50%, both of which occur at the $VR_{H_{2}:CO_{2}}$ = 25% : 75%. 3) A smaller $H_2$ withdrawal rate ($W_{R-H_2}$) results in a lower $W_{F-H_2}$, but a higher $W_{P-H_2}$, e.g., at the $VR_{H_{2}:CH_{4}}$ = 60% : 40%, $W_{F-H_2}$ and $W_{P-H_2}$ are 42% and 51% at $W_{R-H_2}$ = 100×$10^4$ S$m^3$/day, respectively, while they become 31% and 64%, respectively, at $W_{R-H_2}$ = 50×$10^4$ S$m^3$/day. These simulation results indicate that cushion gas injection is beneficial to reducing hydrogen loss, and depleted gas can be used as cushion gas. Depletion time and the ratio of hydrogen, depleted and cushion gas have significant influence on hydrogen storage performance. These insights provide important guidance for industrial hydrogen storage in depleted gas reservoirs.

Speaker: Yawen Yang (University of Science and Technology Beijing)

11:25 Pore Storage for Green Hydrogen: A Sensitivity Analysis of Geological Parameters at Ketzin Anticline (Germany)

The increasing demand for green hydrogen in Europe, particularly in Germany, requires extensive storage capacities to compensate the imbalance between production and consumption. Although salt caverns are known as safe and reliable medium for large scale hydrogen storage, however, these are geographically limited. Therefore, porous reservoirs - such as saline aquifers and depleted hydrocarbon fields - are suggested as alternative solutions.

This study investigates the preliminary feasibility of underground hydrogen storage in Ketzin, Brandenburg, Germany. The Ketzin site was already used for the storage of town gas, natural gas and CO2 as well in the past decades. The potential hydrogen storage unit is the Stuttgart formation, which exhibits fluvial facies characterized by channel and floodplain elements. In this study, we consider a homogenous model for a sensitivity analysis, where porosity, permeability, capillary pressure, relative permeability, hydrodynamic dispersivity as well as salinity of the brine are investigated within their known ranges. The effect of geological parameters is analysed with respect to storage performance such as gas injectivity and productivity as well as sustainability derived from long-term injectivity and productivity.

The results from the sensitivity study reveal that changes in capillary pressure and permeability exhibit the most significant influence on productivity, with variations of up to 150% observed in both positive and negative directions. The sustainability, on the other hand, is significantly negatively influenced by low porosity, low permeability as well as high dispersivity by up to 80 %. However, the results of the high salinity of the water solution have the most positive influence on this index.

The analysis not only holds significant importance in advancing fundamental knowledge on the storage of hydrogen in porous reservoirs and its influencing parameters. It also provides a solid starting point for the systematic evaluation of the feasibility of a prospective regional hydrogen demonstrator. Future work will be carried out with a more complex model including the lithological heterogeneity and focus on the optimization of the operating parameters like the duration of cushion gas injection and storage cycles as well as the injectivity and productivity.

Speaker: Lea Döpp (GFZ German Research Centre of Geosciences)

11:40 Performance Study of Underground Hydrogen Storage in a Saline Aquifer for a Prospective Hydrogen Pore Storage Site in Northeast Germany

To address seasonal fluctuations in supply and demand for renewable energy, hydrogen (H$_2$) can be produced using excess electricity and temporarily stored in geological formations [1]. Due to their large volumes, widespread occurrence and distribution in sedimentary basins, saline aquifers have significant potential for underground hydrogen storage (UHS). However, large-scale UHS of pure H$_2$ in the porous subsurface has not been demonstrated yet. The Helmholtz research project GEOZeit focuses on preparatory research for the construction of a hydrogen pore storage demonstrator in a saline aquifer.

The precursor research contains numerical reservoir simulations with the reservoir software CMG GEM. It targets to assess the capability of UHS operations at the Triassic Stuttgart anticlinal formation near Ketzin, Germany. This formation is lithologically heterogeneous, consisting of mudstone and siltstone, and the reservoir sandstone varies in reservoir properties and thicknesses [2]. In the recent past, a large-scale CO$_2$ storage research project was successfully realised at the flank of the anticline [3]. Now, the top of this structure is explored to serve as a structural trap for storing H$_2$. However, seismic surveys revealed the presence of a fault zone at the top [2,4], indicating possible migration pathways for the gas. To study fluid flow across the fault system, different fault leakage scenarios are carried out by adjusting fault transmissibility to represent sealing or leaky faults.
To access areas situated at an increased distance from the fault zone, we are exploring the option of horizontal directionally drilled (HDD) wells to bypass the fault zone. Although vertical drilling is acknowledged as a cost-effective method, HDD excels in exploring a wider expanse of the reservoir. Given that the performance of a storage operation is strongly dependent on the well location, orientation and integrity, the comparative gas injection and withdrawal performance of a vertical versus a horizontal well layout will be presented.

For all evaluated scenarios, crucial metrics are applied to assess the quality and effectiveness of the storage operation, such as gas purity, sweep efficiency, and cyclic efficiency. The findings from the numerical studies on UHS, encompassing both general considerations and site-specific analyses at the Ketzin site, will play a crucial role in preparing and developing a prospective hydrogen demonstrator and evaluating its feasibility.

Speaker: Dr Anna-Maria Eckel (GFZ German Research Centre for Geosciences)

10:55 → 11:55 MS03: 2.1

10:55 Effects of cross-scale fracture surface roughness in crystalline host rocks on hydrodynamics

Granite is considered a suitable host rock for a deep geological repository for radioactive waste. Since fractures are the main flow pathways for solute transport in this material, accurate and efficient calculation of solute transport and retention phenomena is essential for predictions related to the safety case of the repository. A key issue is the effect of cross-scale surface topography and roughness on hydrodynamics such as fluid channeling and residence time. In this study, we use a fracture geometry model based on µ-CT data and apply a finite element method to reveal the influence of fracture geometry on solute transport behavior. Due to the heterogeneity of fracture shape and aperture width distribution, it is difficult to describe the fracture geometry and morphology by a single variable. In addition, the surface roughness of fracture walls exhibits cross-scale variability due to heterogeneous material composition, which hinders the application of simplifying self-affine geometry descriptions. Instead, investigating of the role of cross-scale surface roughness in solute transport modeling is a promising approach. We investigated the sensitivity of the roughness effect by systematic modification across scales using µ-CT data of granite fractures. By comparing 2.5D vs. 3D transport model results, the role of long wavelength surface constituents and fracture bending can be investigated. The solute transport modeling was performed using the finite element code COMSOL Multiphysics. We discuss the quantitative effect of long wavelength surface building blocks on the tailing of the breakthrough curves and a weakening of the Fickian behavior. The tracer concentration fields in the 2.5D models show a high sensitivity to spatial heterogeneity. The solute transport in larger half-pores is overestimated compared to 3D models. The differences between 2.5D and 3D models due to small-scale surface roughness are considerably smaller. Nevertheless, the effect of surface roughness wavelengths on the BTC tailing behavior is not simply monotonic, which is an important effect to consider when implementing roughness parameters in transport modeling. Finally, we discuss the potential application of using power spectral density (PSD) curves as a means of assessing changes in roughness on fracture surfaces. PSD curves provide a cross-scale quantification of surface topographies. We propose the implementation of PSD curves in transport models to increase their predictive capability for contaminant migration in fractures.

Speaker: Mr Wenyu Zhou (HZDR, FS Leipzig)

Interpore2024_wz1.pptx

11:10 Numerical simulation of transport mechanisms for cyclic high-speed injection and production in fractured-vuggy underground gas storage

Underground gas storage (UGS) exhibits various transport mechanisms due to their multi-cycle injection and production, often overlooked in numerical simulations. In fractured-vuggy UGS, certain mechanisms may have a stronger effect. L underground gas storage is crucial to China's first fractured-vuggy UGS group. A simulation study was conducted to investigate the effect of three transport mechanisms—stress sensitivity, relative permeability hysteresis, and high-speed non-Darcy effect of the fractured-vuggy UGS L during high-speed injection and production. Based on the geological model of the L UGS, the history matchings were separately conducted with and without considering transport mechanism to ensure model accuracy and elucidate the significance of transport mechanisms (as shown in Fig. 1). The multi-component fluid characterizations were implemented separately using the Peng-Robinson equation of state to perform the compositional simulation.

Our study found that stress sensitivity resulted in a 3.31% reduction in storage capacity and a 6.07% decrease in working gas volume. Relative permeability hysteresis led to a 9.05% decline in storage capacity and a 4.09% decrease in working gas volume. The high-speed non-Darcy effect only caused a 0.16% reduction in storage capacity but led to a 4.19% decrease in working gas volume. With increased injection and production cycles, the storage capacity steadily rises. After 25 cycles, there was a 3.97% increase in storage capacity. Stress sensitivity increased the capacity increment to 4.66%, while relative permeability hysteresis and high-speed non-Darcy effect raised the increment to 6.05% and 4.13%, respectively. The greater the impact of the transport mechanisms on storage capacity and working gas volume, the more significant the increase in storage capacity. However, this increase in capacity is attributed to the rise in cushion gas volume and does not reflect an increase in working gas volume. The coupling of stress sensitivity and relative permeability hysteresis resulted in a reduction of 6.51% in storage capacity and a decrease of 11.65% in working gas volume. The coupling of these two mechanisms reduced the loss in storage capacity but amplified the decline in working gas volume. We analyzed six effects resulting from the coupling of two mechanisms, as illustrated in Fig. 2. The coupling of the three mechanisms resulted in a reduction of 6.53% in storage capacity and a decrease of 13.44% in working gas volume (as shown in Fig. 3). Coupling with the high-speed non-Darcy effect had no extra coupling effect on storage capacity but led to a further decline in working gas volume. The mutual influence relationships among the three mechanisms are depicted in Fig. 4.

This study presents the utilization of compositional simulation to investigate the coupled effect of stress sensitivity, relative permeability hysteresis, and high-speed non-Darcy effect, as well as the coupled effects of stress sensitivity with relative permeability hysteresis on the operation of fractured-vuggy UGS. It comprehensively quantifies the varying degrees of influence exerted by different transport mechanisms on the operation of UGS. The study offers guidance for optimizing operational strategies for the UGS L and other similar UGS converted from fractured-vuggy reservoirs.

Speaker: Dr Ye Tian (Southwest Petroleum University)

11:25 A New Numerical Well-Test Model Using an Analytically Modified Embedded Discrete Fracture Model

The technology of multi-stage, multi-well pad fracturing is an effective way to increase the stimulated volume and recoverable reserves in shale reservoirs. During the fracturing treatments, there are common phenomena of well interferences from the multi-well pad. However, there still lacks an effective tool to analyze the parent-child interactions and to evaluate the fracture parameters quantificationally. To narrow this gap, a numerical pad-well model is developed for pressure transient analysis in fractured horizontal wells with secondary fractures and well interferences, based on a discrete fracture model (DFM) and unstructured PEBI grid system.

Using methods of automatic differentiation and Newton iteration, the proposed model is more efficient for computations and interpretations of well testing curves. Its accuracy and practicality have been demonstrated by model verifications and field applications. The results show that the flow regime of interference effects caused by parent-child interactions are more obvious, with a larger child-well production, a smaller well spacing, and a larger hydraulic-fracture angle. The well interferences are also stronger when the child well has more secondary fractures, longer secondary fractures, and higher fracture conductivity, as the pressure drop caused by child well will propagate more quickly. Once the complex fracture networks have developed within the multi-well pad, the interactions between parent and child well will be weaker with the increase in area and conductivity of fracture networks. By comparison, the pressure transient behaviors of Parent well are remarkably affected by Child-well production rate, well spacing as well as connectivity degree. However, the angle, length, number, and conductivity of secondary fracture have weaker impacts on the pressure transient behaviors of Parent well. The field application shows that the single-well testing model without considering well interference cannot match with field data at the late stage. In this case, the estimation errors will occur. With considering the well interferences, the well testing data are interpreted and the fracture parameters are evaluated successfully. This work provides a meaningful way to understand the pressure transient behaviors and to evaluate the fracture parameters of multi-stage, multi-well pads.

Speaker: Prof. Zhiming Chen (China University of Petroleum at Beijing)

11:40 Generalized framework for flow in fractured subsurface formations

While isolated fractures are difficult to fully characterize in subsurface formations, they serve as highly conductive long-range flow conduits and thus may have a strong influence on flow and transport. Recently, we have proposed a new model for flow in fractured formations that provides predictions of the expected flow field. Unlike existing methods, this model accounts for the non-local effect of these flow conduits using kernel functions that appear in an integro-differential flow balance equation. In the present work, kernel functions predicting mean flow rates and pressure profiles for a variety of fracture shapes are presented. Furthermore, discrete fracture length distributions are incorporated leading to a formalism that can account for mixtures of different fracture families. A series of numerical experiments are presented with the results being successfully compared to expensive fine-scale reference simulations.

Speaker: Daniel Stalder

10:55 → 11:55 MS08: 2.1

10:55 Salinity-induced melting of underlaying permafrost

The rise of sea levels and the expansion of plateau salt lakes are among major consequences of the ongoing climate change[1]. When saline water overlays above permafrost (ice in porous soil), ice may melt because salinity reduces the melting/freezing point. Permafrost melting may alter the mechanical properties of the soil and affect the safety of coastal structures[1], and even may induce the release of underground methane gas into the atmosphere[2]. Therefore, studying the kinetics of salinity-induced melting of underlaying permafrost is of great environmental significance.

We conducted visualized experiments to study the kinetics of permafrost melting induced by overlying saline water. Water in bead-pack is first frozen to mimic permafrost and then is immersed under excessive saline water at -5°C. Glass bead diameter varies from 0.1mm to 0.5mm, and salt concentration varies from 10wt% to 25wt%. Melting front (ice-water interface) in porous media can be visually identified (Figure 1(a)) and recorded by camera. As the dilute saline water at the melting front is of lower density than the overlying saline water, Rayleigh-Darcy convection is induced in the porous medium[3,4], so we use Rayleigh number (ratio of gravitational-induced flux over diffusion), Ra, to characterize the mass transfer in liquid-saturated porous layer[5].

Surprisingly, we found two distinct melting patterns: 1) when Ra is high, the melting front is flat and moves down stably; 2) when Ra is low, “fingers” emerge and develop at melting front. This seems to be different from the previous research results that greater Ra implies higher instability[6–8].

We theoretically show that the melting pattern is a result of interplay between local circumflux shaped by the melting front perturbation and the global Rayleigh-Darcy convection (Figure 1(b)). When a perturbation emerges at the front, density contrast induces local convection from the trough to the peak, that further enlarge the perturbation (Figure 1(c)). This local convection is proportional to Ra. Meanwhile, global Rayleigh-Darcy convection enhances lateral mixing which compress the development of the perturbation. This lateral mixing is proportional to Ra^(1.5~2). As a result, when Ra is low, melting is dominated by the local circumflux and fingers grow; when Ra is high, strong lateral mixing homogenizes concentrations along the solid-liquid interface and results in flat melting front. Numerical simulations further support the above theory and match the experiments well. When the melting front is flat, the melting rate can be predicted by classical Rayleigh-Darcy convection theory. However, when a fingering melting front forms, the melting rate is one order of magnitude slower than classical theory prediction. Moreover, fingering melting front implies penetration of permafrost layer before melting all ice, that may induce unexpected groundwater pollution and subsurface methane release.

Speaker: Yumin Wang

11:10 How does access to continuous brine sources in saline aquifers enhance salt precipitation dynamics during geological CO2 storage?

Meeting the long-term expectations of Carbon Capture and Storage (CCS) technology hinges on injecting massive volumes of CO2 annually into deep saline aquifers. These aquifers, due to their storage capacity and proximity to emission sources, are prime candidates for CO2 sequestration. The near-wellbore environment experiences significant thermo-hydro-mechanical-chemical (THMC) perturbations, necessitating a comprehensive understanding through experimental tests and simulations to maximize the safety and cost-efficiency of CO2 storage. The injection of large volumes (on a million-ton scale) of supercritical CO2 into the geological formations causes evaporation of formation water near wellbores and precipitation of salt crystals inside the porous medium. CO2-induced salt precipitation can substantially threaten sequestration in saline aquifers. While existing works primarily focus on predicting salt location and amounts, our study delves into the physics, growth dynamics, and behavior of the fluid-solid interface near the evaporation/precipitation front. We present a series of experiments, including microfluidic, hele-shaw, and sandbox, along with pore-scale reactive transport modeling using the Lattice Boltzmann Method (LBM), providing fresh insights into brine evaporation and salt growth dynamics. Our research challenges the current understanding, revealing a common shortcoming in many experimental studies—failure to facilitate access and replicate in-situ continuous brine sources. This shortcoming significantly alters the dynamics of salt nucleation and growth in porous reservoir rocks, where the availability and continuity of solute through water film movement control geometric alterations. To address this issue, we also designed surface mineral precipitation tests and large-scale sandbox experiments to investigate salt precipitation and growth under two scales and regimes in porous geometries. The laboratory results indicated massive salt accumulation close to the injection port and underlined the effect of solute availability and continuity on the intensifying severity of salt accumulation. The research outcome highlights the interplay of complex processes (some of which are not yet fully characterized) crucial in investigating salt precipitation induced by million-tons-scale CO2 injection. The observed characteristics call for further in-depth investigation because, in the context of subsurface CO2 storage, we need to redefine how we see injectivity impairment due to salt precipitation.

Speaker: Dr Mohammad Nooraiepour (Environmental Geosciences Section, Department of Geosciences, University of Oslo, Oslo, Norway)

11:25 Experimental and Numerical Study of Carbon Dioxide Geological Storage in Coal – A Comparative Analysis with the application of Positron Emission Tomography Imaging.

With the global energy mix predominantly fossil fuel based¹, carbon dioxide (CO₂) capture, utilisation and geological storage (CCUS) is a key tool in reducing anthropogenic CO₂ emissions. One of the main challenges facing CCUS in coal seams is the loss of injectivity due to CO₂ coal swelling^2–7. This work aims to improve the understanding of CO₂ transport mechanisms in coal by applying in-situ Positron Emission Tomography (PET) imaging to obtain direct images of CO₂ flow in coal, allowing for better CO₂ geosequestration techniques.

This work presents a comparative history matching analysis between a one-dimensional Advection Diffusion Equation (ADE) model and experimental data obtained from in-situ PET imaging during core flooding. Traditional core flooding methods usually rely on assumptions that flow within samples is piston like, possibly leading to inaccuracies during modelling⁸. The use of PET imaging provides an actual representation of gas flow behaviour and serves as a ground truth point of reference during history matching. This comparative analysis focuses on determining how the diffusion coefficient of CO₂ in coal changes vis-à-vis coal properties such as initial adsorbate molecules, coal swelling and their effects on gas (particularly CO₂) diffusion within coal samples.

[¹¹C]CO₂ was utilised as the PET radiotracer during core flooding experiments to directly image carbon dioxide (CO₂) diffusion dynamics and mechanisms within coal samples. A 1-D ADE model in MATLAB was then history matched to experimental data for the purpose of obtaining the diffusion coefficient that best represented what was observed. Additionally, X-Ray μCT imaging technology was utilised to obtain high resolution (30μm) images of the core samples. Machine learning algorithms were then applied to these CT images as a method of digital image segmentation to obtain a good estimate of sample porosity, further improving the accuracy of the 1-D ADE model. In-situ PET scans allow for a dynamic observation of gas flow during the core flooding experiment as well as a source on which gas diffusion effects can be confirmed through the use of history matching with a 1-D ADE model in MATLAB and subsequently back calculating the diffusion coefficient of best fit from the ADE model that accounts for key core flooding parameters such as coal porosity, gas flow rate and type of injected gas.

The results show that stable diffusion coefficients arise when samples are dry and an inert gas (He) is used as the carrier gas. In the cases of competitive adsorption between methane (CH₄) and CO₂ in samples that were CH₄ saturated show a decreasing diffusion coefficient. Diffusion coefficients in CO₂ saturated samples were in the order of 100 times lower than in samples that were not exposed to CO₂ prior to injection. This indicates that coal swelling has a significant impact on the ability of gas to effectively diffuse in the coal matrix. These findings further develop the body of knowledge surrounding CO₂ geosequestration in unmineable coal seams and contributes to the optimisation of CCUS processes during the transition to low-carbon and renewable energy sources.

Speaker: Aaron Uthaia Kumaran (University of New South Wales)

11:40 Cotransport of clay and microplastics in saturated porous media

The widespread use of plastics for various applications lead to their inevitable release into the environment. The disintegrated microplastics particles may ultimately find their way into the subsurface, thereby contaminating soil and groundwater. Hence, it is essential to understand the transport behaviour of microplastics in soil to protect drinking water wells from contamination. The presence of natural colloids such as clays in the subsurface are known to alter the transport behaviour of several contaminants. This study aims to understand the cotransport of clays and microplastics in saturated soil through column experiments and mathematical modeling. Experimental results showed enhanced transport of microplastics and retarded transport of clays during their cotransport as compared to their individual transport. This contrasting transport behaviour of clays and microplastics during their cotransport may be due to the competition between them in finding deposition sites on grain surfaces and also due to the formation of clay-microplastics heteroaggregates which may have different surface properties than individual clay and microplastics particles. The experimental results were successfully simulated using mathematical model which accounted for clay and microplastics retention in soil, heteroaggregation kinetics, and heteroaggregate retention in soil.

Speaker: Mahima Horta (Indian Institute of Technology Hyderabad, India)

10:55 → 11:55 MS09: 2.1

10:55 Micro-Continuum Modeling of Mineral Nucleation and Precipitation at Pore-Scale

Mineral nucleation and precipitation commonly occur in nature and plays an important role in many energy-related applications with reactive flow, especially, at pore-scale. For instance, minerals nucleate and precipitate as scale in the pore structure in unconventional reservoirs and significantly reduce the permeability of the porous media. This phenomenon could lead to a rapid decrease in production and cause significant financial loss. The need to predict the dynamic properties of such systems has resulted in questions about the fundamental mechanisms of reactive flow as well as mineral nucleation and precipitation in pores. Additionally, there is still a discrepancy between laboratory molecular scale findings and large-scale observations. To address this discrepancy, modeling methods at the pore scale started gaining interest recently due to the capability of capturing reactive and nonreactive species transport, effects of pore topology, and interface chemical reaction within the same approach, which typically is difficult to observe directly in experiments.
For some solutions, especially high saturation index solution, the nucleation process could potentially play an important role in the precipitation due to either heterogeneous or homogenous nucleation, which was largely overlooked in most previous numerical models for mineral precipitation. In this study, we coupled the micro-continuum simulation approach based on Darcy-Brinkman-Stokes (DBS) equation with the classic nucleation theory (CNT) to study the stochastic nucleation process in reactive flow. A range of different parameters were studied to understand their impact on the nucleation process and precipitation. It was discovered that such a nucleation process was affected by the Damköhler number and Peclet number as well as other effects. As the precipitation reaction on the crystal surface enhances, the total amount of nucleus formed on the substrate decreases due to the depletion of species in the vicinity of the substrate. In general, the competition between flow/transport of species and precipitation consumption governs the behavior of phase change procss and produces different scenarios. The results of this study are expected to shed light on the mechanism of liquid-solid interaction within porous medium.

Speaker: Fengchang Yang (Institute of Mechanics, Chinese Academy of Sciences)

11:10 Investigate the effect of pore heterogeneity on elastic wave velocity evolution under mineral dissolution process

Mineral dissolution is a common phenomenon in many subsurface geo-systems, such as carbon sequestration, wastewater disposal and oil and gas recovery. Dissolution can change the topology of porous rock, which affects the rock’s geophysical parameters, such as permeability and elastic wave velocity. We numerically investigate the relationships between the evolutions of P-wave and S-wave velocities and permeability induced by mineral dissolution under different pore heterogeneities. We use a linear Boolean model to represent sedimentary rocks with various pore heterogeneities. We reproduce three typical dissolution patterns: compact, uniform and wormhole, by adjusting the Péclet and Damköhler numbers. For these numerical simulations, we use the lattice Boltzmann method to compute the velocity and concentration fields, and the finite element method to compute the strain fields. Our results indicate that the evolution trends of both P-wave and S-wave velocities are similar in all simulations. When the initial pore heterogeneity is fixed, the uniform dissolution pattern cases show a faster decrease of elastic wave velocity as the dissolution progresses; when the dissolution pattern is fixed, the more heterogeneous rock shows a faster decrease of elastic wave velocity. The findings have important implications for subsurface engineering applications involving pore network and fluid path evolutions caused by mineral dissolution.

Speaker: Yutian Zhang

11:25 A Benchmark Study of Pore-scale Multiphase Flow in Pore-doublet: The Impacts of Hydrodynamics on Mineral Dissolution Reaction Rate

Abstract: Multiphase flow in porous media is ubiquitous in soils, oil and gas reservoirs, geologic carbon storage and hydrogen storage systems, and batteries. In recent years, direct observation using microfluidic experiments and pore-scale numerical modeling have become increasingly important tools for studying pore-scale fluid dynamics. To further examine the precision of the experiment and evaluate the performance of numerical models in order to expand beyond experimental conditions, it is necessary to develop proper benchmark experiments.
  In this work, a benchmark study is developed for gas-water two-phase flow through a pore-doublet geometry. Microfluidic experiments for a range of capillary numbers and fluid properties were performed and characterized using optical microscopy techniques. Subsequently, the experiments were numerically simulated using the interFoam and interFlow solvers in OpenFOAM, and the phase-field and level-set methods in COMSOL. The comparison enables us to systematically examine the impacts of modeling decisions (e.g., mesh resolution, model dimensionality) under a range of flow rates and wettability conditions. Finally, mineral dissolution was numerically simulated using CrunchFOAM, a solver based on OpenFOAM and coupled with the CrunchTope geochemical framework, to evaluate the subsequent impacts on geochemical reactions in two-phase systems.

Speaker: Xin Wang (Peking University)

11:40 Pore-scale multiphase reactive transport and CO2 mineralization capacity in vesicular basalts

The geological storage of CO2 has emerged as a critical pathway for decarbonization, where in situ carbon mineralization in mafic/ultramafic rocks such as basalts is considered the most stable form of CO2 storage. in-situ CO2 mineralization pilot projects in basaltic formations include the Wallula project in Columbia River basalt and the Carbfix project in Icelandic basalt. Multiphase flow governs the invasion and distribution of native brine, carbonated water, and injected supercritical CO2 and will determine the accessibility and carbonation capacity of reactive mineral pore surfaces during geochemical processes. As such, what is the mix of injectate or injection scheme that optimizes tons of anthropogenic CO2 injected (storage) and mineralization capacity (security) for different formations?
We leverage pore-scale, multiphase computational fluid dynamics (CFD) models, enhanced by experimentally- and theoretically-informed reactive transport relationships and mineral-fluid wettability values, to assess the complex interplay between mineral hydrophilicity, capillary trapping, thin films, dissolution, precipitant nucleation, and mineralization. We simulate various injection schemes, including supercritical (dry) CO2 invading in-situ brine and water-alternating-gas (WAG) injection, within several representative vesicular basalt samples (including one fresh basalt sample, one from the Carbfix site, and two from different flow-top zones in the Wallula site). The pore-scale models are informed by petrographic data of pore morphology (e.g., thin section, SEM, micro-CT), physical-chemical mineralization behavior (coupled with PHREEQC), and routine core analysis data. The models are tuned with different boundary conditions and initial conditions to represent the basalt units in different locations in the reservoir under the selected injection schemes. For each sample, we quantify crucial dynamic relationships for geologic storage and mineralization, including porosity-permeability, accessible reactive mineral surface area, brine-CO2 capillary pressure-saturation (Pc-Sw), and relative permeability (Kr-Sw) relationships. These relationships are explored as a function of native basalt groundwater composition, mineral-specific surface area, and the sequence of pore-scale alteration processes.
The aforementioned dynamic pore-scale relationships are integrated with fluid characterization and core-scale measurements, including hydraulic tests, helium pyconometry, and NMR measurements. Results indicate a strong correlation between the location of precipitated nodules and the menisci of CO2 bubbles under steady state, depicting a vital role of multiphase flow in understanding geochemical processes.
Ongoing efforts involve extrapolating pore-scale functional relationships to gridblock-scale reactive transport reservoir models (e.g., STOMP and MRST) to refine predictions of invasion depth, carbon storage and mineralization capacity, with the consideration of evolving accessible reactive surface area on a larger scale.

Speaker: Tianxiao Shen (Columbia University)

10:55 → 11:55 MS13: 2.1

10:55 Bound water transport by diffusion in wood-revealed by Nuclear Magnetic Resonance

Wood is extensively applied in various fields such as construction, tooling, sculpture, boat building. The water content within wood plays a crucial role in influencing its performance across different contexts. For example, a large portion of water must be removed from wet or green (fresh cut) wood to mitigate further dimensional variations under varying humidity conditions. In this context, the transport of bound water (absorbed between cellulose microfibrils, up to 30% of the dry mass, and at the origin of swelling) plays a fundamental role. However, measuring these transport properties is challenging as this bound water is contained in nanopore inclusions. Moreover, it was shown that during standard imbibition there is a strong coupling between bound water and free water [1-2].
Here, for the first time, we develop experimental conditions allowing to prevent most free water (in vessels or fibers) imbibition in hardwood (oak and poplar). We then follow the progression of bound water by NMR relaxometry. This allows to determine in a straightforward way the diffusion coefficient of bound water. The results reveal that the transport diffusion coefficient of bound water in hardwood is rather large, typically in the order of 10-9 m2/s. More precisely, the diffusion in poplar occurs at a faster rate compared to oak samples. Additionally, we show that the fastest rates of diffusion are observed in the longitudinal direction, followed by the radial and the tangential directions. This research underscores the mechanisms and complexity of bound and free water transfer in bio-based materials and provides an insight into the processing and protection of wood.

Speaker: Ms Luoyi Yan (Laboratoire Navier, Ecole des Ponts ParisTech,CNRS)

11:10 Coarse-grained modeling of fluid transport in swelling porous media

Fluids can induce solid adsorption and swelling in porous materials when they infiltrate pores. For example, alkaline liquids created after water mixing with alkali metals can react with minerals like quartz or feldspar and form a new substance called alkali calcium silicate hydrate. Fluid flow facilitates the damage of concrete as this new substance can swell upon adsorbing water and crack the concrete. In carbon sequestration, CO2 injectivity can significantly decrease with time as gas adsorption induces swelling of the rock matrix and reduces pore spaces for the flow pathway. However, the coupling between fluid flow and solid deformation remains challenging to be captured by numerical models.
Coarse-grained molecular dynamics (CGMD) bridges nano- and micro-scales by mapping a group of atoms/molecules into a single coarse-grained (CG) particle. Compared with all-atomic molecular dynamics (MD), it overcomes the difficulty of simulating multiphase flow with multiphysics in complex pore networks. This study introduces a novel CGMD model to achieve the coupling between fluid transport and solid deformation at the microscale. This model accurately simulates the interactions between fluids and solids, and between fluids and solids themselves. The solid comprises bead-spring chain networks considering bonding and non-bonding interactions and reproduces a broad range of Young's moduli and swelling ratios. The fluid is modeled by dissipative particle dynamics (DPD) and calibrated against density and viscosity at different pressures.
The proposed CGMD model has been adopted to study fluid transport through deformable and non-deformable nanochannels of varying sizes (35.4 nm~123.9 nm) and a simplified nanoporous medium composed of spherical solids. The results are analyzed using the Hagen-Poiseuille equation and the Kozeny-Carmen equation for validation. The effect of swelling on reducing fluid permeability is justified, and a relationship is established between fluid permeability and solid swelling. This study provides a straightforward new approach to modeling fluid transport in swelling porous media at the microscale within the framework of CGMD, with potential applications in concrete design and energy storage technologies.

Speaker: Jian Wu (The University of Sydney)

11:25 Confinement-guided self-assembly of ionic superdiscs

Discotic ionic liquid crystals (DILCs) consist of self-assembled superdiscs of cations and anions that spontaneously stack in linear columns with high one-dimensional ionic and electronic charge mobility, making them prominent model systems for functional soft matter. Compared to classical non-ionic discotic liquid crystals (DLCs), many novel liquid crystalline structures with a unique combination of electronic and ionic conductivity have been reported, which are of interest for separation membranes, artificial ion/proton conducting membranes and optoelectronics. Unfortunately, a homogeneous alignment of the DILCs on the macroscale is often not achievable, which significantly limits the applicability of DILCs. Infiltration into nanoporous solid scaffolds can overcome this drawback. However, little is nknown about the structures of DILCs in nanoscale confinement. Here, we present temperature-dependent high-resolution optical birefringence measurement and 3D reciprocal space mapping based on synchrotron-based X-ray scattering to investigate the thermotropic phase behavior of dopamine-based ionic liquid crystals confined in cylindrical channels of 180 nm diameter in macroscopic anodic aluminum oxide (AAO) membranes. As a function of the membranes hydrophilicity and thus the molecular anchoring to the pore walls (edge-on or face-on) and the variation of the hydrophilic-hydrophobic balance between the aromatic cores and the alkyl side chain motifs of the superdiscs, we find a particularly rich phase behavior, which is not present in the bulk state. It is governed by a complex interplay of liquid crystalline elastic energies (bending and splay deformations), polar interactions and pure geometric confinement, and includes textural transitions between radial and axial alignment of the columns with respect to the long nanochannel axis. Furthermore, confinement-induced continuous order formation is observed in contrast to discontinuous first-order phase transitions, which can be quantitatively described by Landau-de Gennes free energy models for liquid crystalline order transitions in confinement. Our observations suggest that the infiltration of DILCs into nanoporous solids allows tailoring their nanoscale texture and thus their electrical and optical functionalities over an even wider range than in the bulk state, in a homogeneous manner on the centimeter scale as controlled by the monolithic nanoporous scaffolds.

Speaker: Mr Zhuoqing Li

11:40 Fractal nanopore structure of anthracite and CO2 adsorption-induced alteration: A synchrotron radiation SAXS study

Abstract:
Coal is a porous medium material with a highly developed pore network inside. Nanopores dominate gas adsorption and transport behavior in geological reservoirs. The fractal nanopore structure of anthracite from the Qinshui Basin were characterized using synchrotron radiation small angle X-ray scattering (SAXS). Based on the fractal theory of SAXS, the fractal characteristics of nanopores were obtained by analyzing the scattering data. The results indicate that the nanopores at 10~70 nm exhibit surface fractal characteristics, with irregular self-similar surfaces. The fractal nanopore structure of different sizes can be obtained by dividing the logarithmic curve into different regions. The pores at 10~20 nm, 20~30 nm, and 30~40 nm exhibit surface fractal characteristics, with the greatest contribution to the surface fractal characteristics of the overall pores (10~70 nm). However, the pores at 40~50 nm, 50~60 nm, and 60~70 nm exhibit pore fractal characteristics, reflecting the self-similar pore structure of the nanopores. Compared to the initial state, the surface fractal dimension of pores at 10~70 nm with CO2 adsorption gradually decreases. There is a negative correlation between surface fractal characteristics and adsorption pressure. From the initial state to 3 MPa adsorption, the fractal dimensions of pores at 10~20 nm, 30~40 nm, and 60~70 nm decreased by 5.597%, 2.397%, and 8.214%, respectively. CO2 adsorption weakens the fractal characteristics most significantly. The fractal dimensions of pores at 20~30 nm and 50~60 nm exhibit fluctuations under different adsorption pressures. CO2 adsorption has a relatively small impact on the fractal nanopore structure. Specifically, the pores at 40~50 nm with CO2 adsorption have the maximum fractal dimension (up to 2.97) and remain constant. It is difficult to alter the self-similarity of pore structure between 40~50 nm for CO2 adsorption.
Key words: Coal; Nanopore; CO2 adsorption; SAXS; Fractal

Speaker: Prof. Yixin Zhao (China University of Mining and Technology (Beijing))

10:55 → 11:55 MS15: 2.1

10:55 Stable Diffusion in Digital Rock Analysis: Applications, Challenges, and Future Prospects

Digital rock analysis has shown promise in visualizing geological microstructures and elucidating transport mechanisms in subsurface rocks, particularly in unconventional reservoirs such as tight sandstone and shale. Accurate image reconstruction techniques, which provide valuable insights into the pore network, grain distribution and connectivity, are essential to capture the intricate features and heterogeneity present in digital rock samples.

Stable diffusion (SD), a new hotspot in the field of artificial intelligence-generated content (AIGC), holds promising potential for the production of high-quality digital rock images. The SD is a deep learning model based on diffusion techniques, and has revolutionized the field of computer vision by generating highly realistic images from textual prompts, since its first release in 2022. While it is already being used in fields such as illustration, game design and electronic-commerce, its application in the digital core field is still in its early stages.

In this study, we examine the primary applications of SD in the field of digital rock analysis. Specifically, we explore its potential in enhancing image resolution, improving image quality through denoising and deblurring techniques, segmenting images into multiple regions, filling in missing sections, extending images in any direction using outpainting, and reconstructing 3D digital rocks based 2D images. Furthermore, this research highlights certain limitations of existing pre-trained models such as WebUI, Midjourney, and DALL-E. These limitations come from the fact that their databases do not encompass digital rock images obtained from scanning electron microscopes (SEM) or computed tomography (CT). Therefore, it is imperative to fine-tune the existing models or develop new ones specifically tailored to the realm of digital rock analysis, which deserves further attention and investigation.

Speaker: Yutian Ma (China University of Petroleum (Beijing) Karamay Campus)

11:10 Optimizing Underground Hydrogen Storage through Surrogate Modeling: A CNN-LSTM-Attention Network Approach

Underground hydrogen storage (UHS) presents a viable solution for storing excess energy in suitable geological sites, ensuring a stable and scalable energy supply [1]. While extensive experience exists in underground natural gas storage [2], the significant differences in the properties of hydrogen pose unique challenges [3]. To deepen insights into the hydrogen recovery in UHS projects, conducting reservoir simulation and optimization to pinpoint optimal operating parameters becomes essential. However, this process is typically time-consuming. The integration of a surrogate model proves invaluable in expediting the optimization process, addressing the significant time constraints associated with traditional methods.

We develop a base UHS simulation model with a 3D heterogeneous depleted natural gas reservoir featuring an anticline structure. The model integrates various physics, encompassing compositional fluid flow, hydrogen methanation reaction, gravity segregation, hysteresis, and capillary effects. The cycling schedule starts with an initial phase of cushion gas injection and idle periods, followed by five distinct hydrogen injection-idle-production cycles spanning five consecutive years. Notably, injection rates and bottomhole pressure (BHP) of the production well vary across these cycles. The base model incorporates diverse cushion gas types and layers of perforation. Upon parameterizing these decision variables and employing the Latin-Hypercube method for sampling, we generate a comprehensive database comprising approximately 1000 simulation cases, executed in parallel. To predict cumulative productions of hydrogen and other components, we train a surrogate model utilizing a CNN-LSTM-Attention network, leveraging the NVIDIA RTX A6000. The CNN component transforms 3D heterogeneous permeability and porosity fields into 1D datasets. This well-tailored surrogate model seamlessly integrates into the optimization workflow based on the stochastic simplex approximate gradient (StoSAG) [4] method. The primary optimization objective is to maximize hydrogen recovery while concurrently minimizing losses attributed to micro-bio reactions within a predefined timeframe.

Due to gravitational segregation in the base model, hydrogen, cushion gas, methane, and water exhibit a vertical distribution from top to bottom. Additionally, we note a progressive enhancement in hydrogen recovery efficiency with consistent injection rates during production. Our numerical experiments highlight nitrogen's superior effectiveness as a cushion gas for augmenting hydrogen recovery compared to carbon dioxide and identify a specific percentage of micro-bio-induced hydrogen loss. Regarding the performance of the surrogate model, the R2 scores for both training and testing datasets mostly exceed 0.95, affirming its robustness and feasibility. To demonstrate the acceleration achieved through the proxy model in optimization, we compare CPU times between the reservoir simulation and surrogate models. The former averages 210-300 seconds per case, while the latter ranges from 0.01 to 0.1 seconds. This translates to a remarkable speedup of approximately 1000 times compared to optimization conducted solely with reservoir simulation, all while maintaining equivalent accuracy.

This research introduces a comprehensive framework designed for reservoir simulation and optimization in UHS, integrating a CNN-LSTM-Attention network and StoSAG. Important mechanisms, including compositional flow, cushion gas dynamics, and micro-bio reactions, are thoroughly incorporated in the UHS simulation. This framework serves as an important guideline, offering crucial insights into accelerating the optimization of the UHS process and related projects.

Speaker: Mr Zhilei Han (KAUST)

11:25 Feasibility study of the inversion method for non-uniform hydrate saturation distribution based on ensemble Kalman filter algorithm

Field tests and laboratory experiments indicate that the spatial distribution of hydrate saturation in hydrate reservoirs is non-uniform. This non-uniform distribution significantly impacts the reservoir’s temperature changes, and gas and water production rates during reservoir development. Currently, the primary methods for determining hydrate saturation distribution in porous media are nuclear magnetic resonance (NMR) and computed tomography (CT) scanning. However, these methods have limitations such as small detection ranges, high costs, and the necessity of interrupting experiments. During depressurization exploitation of hydrate reservoirs, abundant data on gas and water production, as well as temperature and pressure monitoring, are available. These highly reliable observational data vary with changes in hydrate saturation distribution, providing the possibility of using inversion methods to determine this distribution.
This study first conducts secondary development of the Tough+Hydrate simulator. Energy and mass conservation equations are separately constructed for the matrix and high-conductivity channels after reservoir stimulation. The transfer of mass and heat in the matrix and high-conductivity channels was characterized using the discrete fracture method. A numerical simulation method for reservoir stimulation assisted depressurization development of hydrate reservoirs was established and implicitly solved. Then, by combining the ensemble Kalman filter algorithm with the simulator, the inversion method of the hydrate saturation distribution was built and then validated using three cases: core scale depressurization development, hydraulic fracturing assisted depressurization development, and radial well stimulation assisted depressurization development. The impact of the number of observation points on the inversion results also was investigated. Finally, based on
the observation data of Masuda’s classic experiment, the inversion method was used to obtain the distribution of hydrate saturation in the core of Masuda’s experiment successfully.
Research results indicate that the established inversion method continuously assimilates observational data in the ensemble. Hydrate saturation distributions obtained through inversion in the three cases tend to approach the preset distributions, demonstrating the reliability of the inversion method. The quantity of observational data has a certain influence on inversion results; more observational data lead to the assimilation of more information, resulting in hydrate saturation distributions closer to the actual values. Inversion results based on Masuda's experimental data reveal a strong non-uniformity in hydrate saturation distribution within the core, with a relatively high hydrate saturation zone in the central region and lower hydrate saturation at the inlet and outlet ends.

Speaker: Yongge Liu (China University of Petroleum (East China))

11:40 A Comprehensive Approach to In-Situ Stress Estimation in Subsurface Energy Structures using Numerical Simulation and Machine Learning

The objective of this research is to establish a consistent relationship between nonlinear numerical simulations and the obtained results for use in inverse analysis. We simulate the shape of breakouts, taking into account inelastic deformation of high-porosity limestone, using developed finite element methods under various in-situ conditions. Subsequently, the dataset is employed to train four machine learning algorithms, as well as white-box algorithms, in order to determine the relationship between in-situ stress and breakout shape.
This study employs a two-phase approach through inverse analysis to determine in-situ stress. In the initial phase, we utilize nonlinear elastoplastic finite element modeling to generate a dataset. This dataset serves as the training data for a machine learning (ML) algorithm designed to establish a predictive correlation between in-situ stress and borehole breakout measurements. In the second phase, the trained ML algorithm is applied to estimate the equivalent in-situ stress based on provided borehole breakout measurements. To investigate in-situ stress from borehole breakouts and construct robust correlations, we employ a combination of four black-box algorithms and three white-box algorithms.
A numerical simulation has been performed to determine the geometry of borehole breakouts under various in situ stress levels and taking into account plastic deformations. The breakout cross-section's non-circular shape can be modeled using an elastoplastic model that was created using the finite element approach. This shape fluctuates as the breakout develops until it stabilizes. The depth of the breakouts rises until a stable state, just like in earlier models based on the elastic assumptions. The width of the breakouts, however, does not change as the breakouts develop. The growth of the breakout is stopped by taking into account inelastic deformations, which also gives the chance to model the V-shaped type breakouts seen in both field and laboratory data. According to laboratory research, disregarding plastic deformations in very porous and weak rocks results in an incorrect understanding of the relationship between in situ stress and rock failure state.
To determine the correlation between in situ stress and breakout shape, four machine learning techniques and three whitebox algorithms have been applied to the data set generated from numerical tests. To calculate the in situ stress from breakout shapes, trained algorithms were put through an inverse analysis. The XGBoost and GP algorithms mean square error (RMSE) of 0.419541, 0.9977and a determination coefficient (R2) of 0.99565 and 0.97564 outperform others in terms of accuracy and suitability.
The novelty of the proposed approach lies in its consideration of inelastic deformation for estimating in-situ stresses, which is a crucial factor in the failure of high-porosity and unconsolidated rocks. Additionally, it involves establishing a relationship for estimating in-situ stresses through a combination of machine learning and numerical simulation.

Speaker: Dr Erfan Mohammadian

10:55 → 11:55 MS19: 2.1

10:55 Electrical response during drying and imbibition of mesoporous materials.

Upon the contact of the conductive mesoporous material with an aqueous electrolyte solution, ions adsorb on its surface, spontaneously forming an electrical double layer. In this case, due to the absence of an applied external potential difference, while the total charge of the system is zero, there is already accumulated a local charge at the interface. The number of adsorbed ions is determined by the chemical composition of the material, the bonds on the surface and, due to the spontaneity of this process, to a large extent by the surface area. Therefore, mesoporous materials with high specific surface area and porosity become the most favorable objects for research. However, when a second electrode with a different surface chemistry is introduced into the circuit, a potential difference occurs. This leads to spontaneous charge redistribution between the electrodes and rearrangement of ions at the interface. Current relaxation and potential difference evolution are the key characteristics of this process. Changes in the imbibition parameters as well as decreasing of wetted surface area during drying affect these electrical responses. Here we investigate the nature of these electrochemical processes and their correlation with fluid dynamics using gravimetric mass uptake measurements in combination with Zero Resistance Amperometry and other Open circuit methods.

Speaker: Mrs Mariia Liseanskaia

11:10 Main controlling factors and pore structure of low resistivity shale

Abstract:The phenomenon of abnormal low resistivity values in shale is widespread at the base of the Longmaxi Formation in the southern Sichuan region,and the gas content between different low resistivity shale gas wells have obvious differences.In order to explore the controlling factors and the differences in nanoscale pore structures of different resistivity shale, the shale of the Longmaxi Formation in the Changning area of the Sichuan Basin was taken as the research object.Firstly,according to the characteristics of electric logging curves and the production capacity,the shale wells of Longmaxi Formation in Changning area were divided into ultra-low resistivity wells(Rt<1Ω·m),low resistivity wells(1Ω·m<Rt<20Ω·m),and normal resistivity wells (Rt>20Ω·m).Secondly,the effects of organic matter,conductive minerals and pore fluids on the resistivity of shale were analyzed through the rock electrical experimental,and the main controlling factors of shale resistivity were clarified.Finally, the reservoir space of the shale reservoirs of the Longmaxi Formation in the study area was characterized by argon ion polishing scanning electron microscopy, low-field nuclear magnetic resonance,carbon dioxide and nitrogen adsorption.The results show that the ultra-low resistivity wells are mainly affected by the graphitization of organic matter,which leads to the exponential decrease of shale resistivity,while the low resistivity wells are mainly affected by the high water saturation,and the shale resistivity decreases relatively little.There are great differences in the microscopic pore structure of shale reservoirs with different resistivity.The ultra-low resistivity wells have the lowest porosity (the mean is 3.38%),and the worst inter-pore connectivity and openness (the mean hysteresis coefficient is 0.21).There was little difference between the porosity of low resistivity wells(The mean is 6.22%) and normal resistivity wells (the mean is 6.14%),and the normal resistivity wells (the mean hysteresis coefficient is 0.13) were better than those of low resistivity wells (the mean hysteresis coefficient is 0.15).

Speaker: Yijiang Leng (Southwest Petroleum University)

11:25 Elastic indication of fluid patch clustering in partially saturated porous media: critical saturation model

Knowledge related to the relations between elastic observations and fluid state cannot be overemphasized in porous media, which is of fundamental concern for the extraction of hydrocarbons, the monitoring of carbon dioxide geological sequestration, and the underground hydrogen storage. As known from previous theoretical and experimental experience, the P-wave velocity-saturation relation for partially saturated porous media is a concretization of the effect of fluid patch evolution on elastic properties. However, the P-wave velocities are not only governed by the overall saturation, but also depend on the fluid patches and their size. The patch size variation as saturation changes is commonly ignored in modelling investigations, even though it is natural to assume that fluid patches will form larger as saturation progresses and that percolating clusters will form at some critical saturation levels. To capture the evolution of patch size with saturation implied in the velocity-saturation relations, we are inspired by percolation theory. By incorporating the connectivity of water-filled patches in the continuous random medium model, we develop a critical saturation model. We apply this critical saturation model to examine recently reported experimental measurements, specifically analyzing the patch size changes. For measurements of drainage or imbibition processes in four sandstone samples, we indeed find a clear indication of growing patch size with water saturation. The predictions of the critical saturation model are in reasonable agreement with elastic observations. Our approach enhances the interpretation accuracy of the velocity-saturation relations and lays the foundation for a profound understanding of the effects of fluid clustering on elastic properties in partially saturated porous media.

Speaker: Dr Qiang Liu (China University of Petroleum (East China)-Curtin University)

11:40 Analyzing uncertainties of the instability of the anode /electrolyte interface in solid state batteries

Modern batteries must meet stringent performance standards to qualify for use in technological solutions that seek to address current global environmental challenges. Such batteries should exhibit high energy densities, fast charging, and long cycle lives while maintaining a high degree of safety. Solid-state batteries (SSBs) exploit high-capacity anode materials such as Lithium or Sodium metal and are expected to deliver high standards that meet the stringent needs of long-range electric vehicles and large-scale renewable energy storage. However, stability in these devices presents important challenges. The interface anode/electrolyte interface is home to structural imperfections that lead to heterogeneous stripping and plating during cell cycling, significantly reducing cell capacity and compromising cell safety. Although numerous studies have attempted to shed light on the root causes of inhomogeneous electrochemical processes at metals anodes in SSBs, the detailed atomistic processes that lead to ubiquitous dendrites growth in metal anodes are not well elucidated. Critically lacking is the detailed understanding of the thermodynamic driving forces that lead to such degradation at the atomistic level.
We analyze the forward propagation of the imperfection parameters that are susceptible to highly defeat the stability of the anode/electrolyte interface. The imperfections in inputs are parametrized as random variable and Monte Carlo method and sensitivity analysis approaches allow a better understanding of Lithium plating and stripping behaviors.

Speaker: Ben Mansour Dia (CPG, KFUPM)

12:00 → 13:00 MS01: 2.2

12:00 Realistic evaluation of prototypical porous materials for carbon capture

Carbon capture, utilization, and storage (CCUS) is an attractive approach to help decarbonization from point sources, like energy supply and other industries, as well as for pulling CO2 out of the atmosphere (i.e., direct air capture, DAC). Among several approaches at differing technology readiness levels, solid sorbents are promising as they generally combine high uptakes and selectivity with milder regeneration energies.

Adsorption screening and testing of promising materials are often performed using pure component or point uptake experiments, which only give information about adsorption capacity and ideal selectivity. At realistic process conditions, competitors such as moisture and temperature have a large effect on the uptake of CO2, wherein the presence of water could either increase CO2 capacity, compete for the same adsorption sites, or even induce material collapse. The kinetics on the other hand is another important factor for an effective separation.

Figure 1 shows that apparent CO2 uptake decreases by 5% RH in Zeolite 13X. Figure 2 presents the details of the sorption kinetics of both components highlighting replacement effects.

In this work, several porous materials including zeolites, MOFs, and functionalized resins are screened in realistic conditions for CO2 capture using advanced dynamic gravimetric sorption and breakthrough methods. The tests were conducted under varied conditions, e.g., different CO2 concentrations and relative humidity. The results showed that humidity is the key factor affecting the CO2 capture efficiency. This study provides a reference for screening the effective sorbents for carbon capture.

Speaker: Meishan Guo (Surface Measurement Systems Ltd.)

12:15 Effect of reactive impurities in CO2 gas storage in carbonate reservoirs

Storage of carbon in the form of compressed CO2 in the subsurface represents a potentially viable and cost-effective way to reduce emission of heat-trapping CO2 to the atmosphere. The feasibility of a CO2 storage scheme depends on many factors, including CO2-induced corrosion and scale; availability of inexpensive CO2 sources, available pipeline, pipeline integrity, temperature and pressure conditions, caprock integrity, biological activity in the subsurface, injectivity, mineral trapping and interactions with the rock surface amongst others. All these factors are potentially affected by the presence of impurities in the CO2 supply. The chemical composition of the CO2 stream will depend on the fuel sources and capture methods, and CO2 with impurities is much more widely available in sufficient quantities for transport to offshore facilities as capture processes and transport generally lead to some content of impurity. The effects of major impurities (SO2, N2 and O2) on phase behavior as well as corrosion in pipelines are quite well understood and widely reported in literature. Some studies have addressed the geochemical effects of impurities on the matrix in the well, mainly for shales and sandstone reservoirs. However, the geochemical effects of long-term storage of impurity-containing CO2 are not well known, particularly for carbonates, including chalk. The theoretical and experimental predictions of the interaction energies for complexes of CO2 with relevant impurities (aminoethanol, ethylene glycol, methanol, ethanol, water, H2S, NH3, CO, NOx and SO2) suggest that the interactions with CO2 vary and some of the species interact strongly even in small quantities compared to small gaseous impurities like N2, Argon and O2. Injection testing of these impurities in Danish North Sea Chalk cores are conducted in core flood experiments combined with chemical analysis of the effluent fluids and chalk surfaces to investigate the alterations caused by impurities.

Speaker: Karen Feilberg (Danish Hydrocarbon Research and Technology Centre)

12:30 Effect of dissolution and heterogeneity on supercritical CO2 invasion in porous media: an experimental study using X-ray micro-computed tomographic imaging

In this study, with the utilization of quasi-dynamic X-ray micro-computed tomographic (MCT) imaging, pore-scale fluid configurations were tracked for CO$_{2}$ injected into two different brine-saturated Bentheimer sandstone cores under conditions relevant to geologic carbon sequestration. CO$_{2}$ injection was performed at low capillary number (Ca = 10$^{-9}$) into cores saturated with live- and dead-brine, consecutively. Two cores with different pore space characteristics were used to investigate the impact of heterogeneity on the resultant fluid configurations. We also interrogated possible wettability alteration during CO$_{2}$ injection based on the obtained MCT images. We find that invasion patterns continue to evolve long after breakthrough, with distinct and gradual saturation changes occurring after decades of pore volumes injected. For one core, the invasion patterns for both live- and dead-brine conditions eventually converge after 16.5 pore volumes; for the second core, the patterns are distinct under the different injection conditions for up to 30.1 pore volumes. The presence of pore-scale heterogeneities in the cores has a strong influence on the ultimate CO$_{2}$ distribution under the different conditions. It is expected that results from this study will contribute to better understanding of the pore-scale invasion of CO$_{2}$ and ultimately, the field-scale application of geologic carbon sequestration.

Speaker: Ruotong Huang

12:45 Pore-Scale Dynamics in Carbonate Reservoirs: Understanding Heterogeneity's Influence on CO2 Storage in Indiana Limestone

Subsurface carbon dioxide (CO2) storage is one of the most critical strategies in combatting climate change. One of the principal challenges encountered by the Carbon Capture and Storage (CCS) industry is the accurate understanding, representation, and upscaling of fluid flow dynamics within targeted reservoir formations. This problem is rather complex in carbonate formations due to their varying spatial heterogeneities and complex pore structures. In our experiment, we assess the impact of microporosity, heterogeneity and connectivity on saturation changes, and trapping in Indiana limestone samples.
We image Indiana limestone core samples using a high-resolution μCT scanner, with a resolution of 4.9 µm. Through two cycles of drainage and imbibition, we flooded the core with two different flow rates, to understand the influence of heterogeneity on the mobility of both wetting and non-wetting phases within the porous media. During the two cycles, the pore-scale capillary number was kept well within the capillary flow regime (10-7 - 10^-8). Our study highlights noticeable differences in saturation, non-wetting connective path, and dynamics of pore-filling between the two flooding cycles. Additionally, we show the redistribution of the non-wetting phase across the pore space when increasing the non-wetting phase flow rate. Furthermore, we investigate intermittent flow observed during imaging manifesting as artefacts within the reconstructed 3-D volume. This exploration aims to elucidate the origins and implications of intermittency, providing valuable insights into its impact on imaging quality and interpretation of pore-scale fluid dynamics.

Speaker: Nihal Darraj (Imperial College London)

12:00 → 13:00 MS03: 2.2

12:00 Study on Foam Flow Behavior in Fractured-Vuggy Systems

For deep fractured-vuggy carbonate reservoirs, foam flooding is an effective oil recovery method. However, the connectivity and anisotropy of the fractured-vuggy network affect the plugging performance of foam and the ability to adjust the displacement profile. Therefore, it is necessary to conduct a comprehensive investigation on the migration characteristics of foam, in order to provide guidance for the oilfield application of foam flooding.
The fractured-vuggy system exhibits heterogeneity and strong diversion capabilities. When developing a model that can represent reservoirs with fractured-vuggy formations, it is challenging to simultaneously satisfy the characteristics of multiple experiments with a single model. The flow behavior of foam in fractured-vuggy system is a crucial factor that needs to be observed, so it is necessary to appropriately relax the requirements for simulating reservoir temperature and pressure conditions. Based on the combination relationships of fractures, wall effects, and fluid properties, a multi-dimensional and multi-scale fractured-vuggy model was developed. This model, combined with the selected foam system, was used to study the evolution of foam structure, flow characteristics, gas-liquid distribution patterns, and oil displacement properties within the fractured-vuggy model. The study summarized the dynamic and static matching relationships between fractured-vuggy dimensions and foam, investigated the improvement effects of foam on shielding fractured-vuggy flow, and comprehensively analyzed the changes in the foam displacement front and the different distribution characteristics of gas and liquid in fractures under the influence of various factors. The study clarified the foam displacement characteristics corresponding to different production scenarios.
The experimental results show that, due to limitations in the channel dimensions, there are differences in the quantity and shape of foam distribution within fractured-vuggy formations after injection. Significant variations also exist in the evolution patterns during the static stable stage of foam. The shielding effect of foam displacement between fractures is dynamically adjusted. This is because high-quality stable foam gradually "plugs" dominant fractures, increasing the flow resistance for subsequent foam in the dominant fractures. Consequently, some foam is still able to divert towards the inferior fractures.

Speaker: Dr Zhengxiao Xu (Changzhou University)

12:15 Experimental study on the effect of supercritical CO2 and acid alternative injection mode on the acid-etching behavior and conductivity of fracture in carbonate rocks

In order to enhance acid penetration depth and fracture conductivity, acid fracturing techniques involving the alternating injection of non-reactive fluids (fracturing fluids) or weakly reactive fluids (self-generated acid) with acid are considered a pivotal enhanced oil recovery rate in carbonate reservoirs. In recent years, the CO2-enhanced acid fracturing technique has gained prominence in the Middle East. This method adopts a mixed injection mode of CO2 and acid liquid in the wellbore, featuring the advantageous effects of retarding acid-rock reaction rates, improving fracture conductivity, and conserving water. However, its application in deep wells is limited by the high friction associated with the mixture of CO2 and acid. Supercritical CO2 and acid alternating injection, conducted under the conditions of conventional acid fracturing with established dominant fracture channels, involves supercritical CO2 injection to reduce the flow resistance of CO2 into the reservoir, showcasing potential for application in deep wells. Nevertheless, the impact of supercritical CO2 and acid alternating injection on hydraulic fractures and conductivity has not been reported.

This paper utilizes a self-developed supercritical CO2 acid etched fracture conductivity simulation device and employs downhole cores to conduct experiments on hydraulic fracture acid etching and conductivity under two scenarios: alternating injection of weakly reactive fluid (self-generated acid) with gelled acid and alternating injection of supercritical CO2 with gelled acid.

Research results indicate that supercritical CO2 and gelled acid alternating etching exhibits more pronounced elevation variations on the fracture surface, demonstrating a stronger and more dispersed non-uniform etching compared to the self-generated acid/gelled acid alternating injection mode. In terms of fracture conductivity, CO2/gelled acid alternating injection exhibits higher initial fracture conductivity, and under medium to high closure pressures (≤52MPa), self-generated acid/gelled acid alternating injection demonstrates higher conductivity. However, at high closure pressures (>52MPa), the supercritical CO2/gelled acid alternating injection mode can create higher fracture conductivity.

This study experimentally explores the impact of supercritical CO2 and acid alternating injection on fracture conductivity, demonstrating that for deep carbonate reservoirs with high closure stress, adopting this mode has the effect of reducing the usage of non-reactive or weakly reactive fluids and enhancing fracture conductivity under high closure pressure.

Speaker: Ke Xu (Southwest Petroleum University)

12:30 Study on Migration Mechanism of Gas Tracer in Carbonate Gas Reservoir

At present, 47.5% of the remaining recoverable reserves of global oil and gas resources are distributed in carbonate reservoirs around the world, of which natural gas reserves account for 44.4%, which means carbonate gas reservoirs have great development potential. With the adjustment of energy strategy, carbonate gas reservoir has been received more great attention as its rich reserves and cleanliness. However, the gas reservoir has the complex fractured-vuggy structure, high temperature and high pressure, which leads the conventional logging has high cost and low accuracy. As a result, it is necessary to create an intelligence technology to monitor the fluid profile and the characterizes of fracture structure. Tracers are the only indicators that can accompany fluids into the formation and carry reservoir information back to the surface, which can be carried out the problem of carbonate gas reservoir. Some researchers always pay more attention to tracer flowback curves, which wants to explain the results like fluid profile from the phenomenon of flowback curves. But there are some details in flowback curves can not be explained and identified without the mechanism of tracer. Therefore, this manuscript establishes a set of study method for the migration mechanism of gas tracer based on the microscopic percolation mechanism which considers the migration characteristics of gas tracer in carbonate gas reservoirs. The migration experiments of gas tracer are designed to get deviation factor for correcting the flow equation in porous media in carbonate gas reservoir. The flowing, diffusion, adsorption and retention of gas tracer are presented in the flow equation through the experiments of different migration laws of gas tracers. Based on the experimental results and the characteristics of the field flowback curve, the gas tracer flowback diagram is established.

Speaker: Yihe Du (Southwest Petroleum University)

12:45 Bubble growth and induced flow characteristics in porous media under heating conditions

The release of trapped bubbles from dead-end porous media filled with nonvolatile liquid holds extensive applications in gas‒liquid reactors, CO2-assisted srteam flooding, ceramic sintering, and droplet microcarriers. Since traditional pressure-driven flow fails to induce bubble transport in dead-end pores, this study investigates the potential use of heating to control the release of bubbles from dead-end porous media. This study addresses the issue of bubble retention in dead-end porous media and designs various microfluidic chips with different porous structures, including upward sparse and downward dense, upward dense and downward sparse, and isotropic porous media. The porosity of the sparse and dense regions is 0.7355 and 0.8718, respectively. Using CO2 as the gas and dimethyl silicone oil as the liquid, a self-built Micro-PIV visualization experimental system is employed to investigate the influence of porous media pore structures on the growth and release of bubbles, as well as the induced flow field patterns under heating conditions. The results show that an increase in temperature leads to the transfer of dissolved gas to the bubble, resulting in an increase in bubble pressure, which serves as the driving force for the bubble to pass through the pore throat. Under heating conditions, changes occur in the surface tension of the gas-liquid interface and the viscosity of the liquid phase, while capillary pressure is a key factor for the bubble to pass through the channel. Blockage occurs when the bubble interface capillary pressure is less than the threshold pressure and breakthrough happens when it is greater. The structure of porous media with dense upper and sparse lower regions impedes bubbles from entering low porosity zones, reducing the coalescence probability. Conversely, the structure with sparse upper and dense lower regions increases the coalescence probability, facilitating bubble expulsion. When bubbles seal pores, their continuous growth causes the liquid velocity of corner film flow to rise. During bubble release, the surrounding liquid accelerates to fill the original space, causing a simultaneous transition that induces vortices along the microcolumn walls.

Speaker: Zhi Feng (China Jiliang University)

12:00 → 13:00 MS06-A: 2.2

12:00 Aging of liquid foam in porous media

One of the key stages in materials recycling is their crushing into finer elements, i.e., granular material or powder to be sorted and re-used. Those crushed granular materials can be mixed and reshaped using binders which will make it possible to reproduce solid objects with useful purposes. Mainly, the major practical difficulty in the implementation of these granular assemblies, whether recycled or not, is the dispersion of the binder at the contacts between the grains in order to produce binder bridges that will ensure the cohesion of the whole.
Complex liquid foam (liquid foam loaded with a binding component) represents a first-choice low carbon binder precursor to be pushed through the voids offered by a packing made with such grains, to give shape to the whole and to confer significant mechanical strength. This strength is expected to depend on the microstructure of the confined foam, the latter being controlled by the bubble-to-pore size ratio "r" [1]. However, as the liquid foam undergoes the so-called coarsening mechanism, which consists in the exchange of gas between the different bubbles, the size ratio increases as function of time.
Here, we study the coarsening of liquid foam confined into the porosity of granular packings. During these experiments the liquid fraction is maintained uniform in the system by appropriated rotation of the samples in order to counteract the effects of gravity (see Figure 1). We show that coarsening is faster whenever we increase the initial confinement parameter r0 at constant liquid saturation. We find the result known from the literature for which the bubbles eventually reach pore size, which marks the end of coarsening, but we also highlighted that before stopping, there exists a regime of self-accelerated coarsening. The main deviations with respect to the coarsening of unconfined foams will be presented.

Speaker: Mr Ali Salamé (Laboratoire Navier, Univ Gustave Eiffel, Ecole des Ponts, CNRS-UMR8205)

12:15 Trapping criteria for three-dimensional periodic liquid particles in micropillar scaffolds

Liquid particles within three-dimensional periodic scaffolds play a crucial role in various natural and engineering applications, for example, cellular arrays composing living tissue, 3-D materials that mimic tissue with an unprecedented level of control, and innovative liquid-infused materials designed for carbon capture. Although it has been known that fluid interfacial energy during multiphase displacement can drive the emergence of 3-D periodic liquid particles in micropillar scaffolds, the underlying microscale physics and the macroscopic formations of liquid particles in scaffolds remain unclear. Here we establish trapping criteria for the formation of liquid particles in micropillar scaffolds based on the evolution of fluid-fluid interfacial curvature during multiphase displacement, considering four key parameters (pillar size α, contact angle θ, capillary number Ca, and viscosity ratio M). The fundamental trapping criteria are theoretically derived in α-θ space under a viscous stable state and main meniscus-dominated flow, where critical α distinguishes trapping mode and complete displacement, and critical θ further distinguishes between diamond-like and spherical particles in the trapping mode. However, the critical pillar size α for trapping mode or completed displacement can be further affected by viscous instability under lower viscosity ratio M and inter-pillar interface-dominated flow under lower capillary number Ca. These criteria are validated through numerical CFD simulations and confirmed by microfluidic experiments. These results indicate the conditions for trapping 3-D periodic liquid particles in micropillar scaffolds, offering insights that extend and clarify prior literature. The derived criteria provide valuable guidelines for the design of micropillar scaffolds and for the emergence of 3-D periodic liquid particles in micropillar scaffolds under various conditions by controlling multiphase displacement processes.

Speaker: Dr Wenhai Lei (KTH Royal Institute of Technology)

12:30 Spontaneous Symmetry Breaking during Dispersed Fluid Flow through Porous Media

Dispersed fluid systems (foam, emulsion, bubbly liquid, etc.) involves in many key geophysical/geochemical, environmental, and engineering processes[1-3]. However, regardless of many pore-scale and channel-scale approaches[4, 5], predicting dispersed fluid flow behavior in porous media is still a major challenge. Here we conduct experimental and theoretical investigation, trying to rationalize the long-puzzling gap between single-channel scale and porous media scale models for dispersed fluid flow.
We first conduct experiments in doublet microfluidic model (Fig. 1a). We fix $Ca_d$ (dispersed fluid capillary number) and observe the flow state at varying $Ca$ (total capillary number). At low Ca, very significant difference for blob fluxes between two parallel channels are identified even when the two channels are highly symmetric (Fig. 1b). After careful quantitative analysis, we realize that minor fabrication error cannot rationalize this symmetry breaking.
We thus hypothesize that this asymmetric flow of dispersed fluid is originated from a new symmetry breaking mechanism. We thus conduct stability analysis in a doublet system, that introduce an infinitesimal perturbation to assess its potential for self-amplification. Analysis shows that such symmetry breaking can emerge, if there is a negative correlation between pressure drop and total flow rate at a constant dispersed fluid flux ($\left.\frac{\partial F}{\partial Ca}\right|_{Ca_d} < 0$) within a specific channel. The existence of $\left.\frac{\partial F}{\partial Ca}\right|_{Ca_d} < 0$ correlation is successfully validated: theoretically, by classic Bretherton's correlation for non-viscous gas slug flow in a uniform cylindrical tube [6] (Fig. 1c); and experimentally, by microfluidic experiment along a single channel of sequential pore-throat structure (Fig. 1d).
This breaking of flow path symmetry, if emerges in porous media, may result in preferential flow even in homogeneous media. We conduct a demonstrative experiment in a homogeneous porous medium to validate the above inference. Surprisingly, we do observe significant non-uniform flow at steady state, as shown in Fig. 1e and Fig. 1f. Preferential paths carry almost all dispersed fluid flux, while blobs in other paths flow only occasionally and slowly. Noticeably, the dispersed fluid saturation is negatively correlated with its flux, which is contradictory against classic relative permeability idea, but can be well explained by the abovementioned spontaneous symmetry breaking.
This discovery of spontaneous symmetry breaking of dispersed fluid in porous media may bring new insight into the understanding and modeling of complex fluid behaviors in disordered geometry.

Speaker: Dr Jie Qi (Peking University)

12:45 A three-layer Hele-Shaw problem driven by a sink

We investigate a sink-driven three-layer flow in a radial Hele-Shaw cell performing numerical simulations. The three fluids are of different viscosities with one fluid occupying an annulus-like domain, forming two interfaces with the other two fluids. Using a boundary integral method and a semi-implicit time stepping scheme, we alleviate the numerical stiffness in updating the interfaces and achieve spectral accuracy in space. The interaction between the two interfaces introduces novel dynamics leading to rich pattern formation phenomena, manifested by two typical events: either one of the two interfaces reaches the sink faster than the other (cusp-like morphology) or they touch each other (interface merging). In particular, the inner interface can be wrapped by the other to have both scenarios. We find that multiple parameters contribute to the dynamics including the width of annular region, the location of the sink, and the mobilities of the fluids.

Speaker: Meng Zhao

12:00 → 13:00 MS07: 2.2

12:00 A robust two-level overlapping preconditioner for Darcy flow in high-contrast porous media

In this talk, we present a two-level overlapping domain decomposition preconditioner for solving linear algebraic systems obtained from simulating Darcy flow in high-contrast media. Our preconditioner starts at a mixed finite element method for discretizing the partial differential equation by Darcy?s law with the no-flux boundary condition and is then followed by a velocity elimination technique to yield a linear algebraic system with only unknowns of pressure. Then, our main objective is to design a robust and efficient domain decomposition preconditioner for this system, which is accomplished by engineering a multiscale coarse space that is capable of characterizing high-contrast features of the permeability field. A generalized eigenvalue problem is solved in each non-overlapping coarse element in a communication- free manner to form the global solver, which are accompanied by local solvers originated from additive Schwarz methods but with a non-Galerkin discretization to derive the two-level preconditioner. We provide a rigorous analysis indicating that the condition number of the preconditioned system could be bounded above with several assumptions. Extensive numerical experiments with various types of three-dimensional high-contrast models are exhibited. In particular, we study the robustness against the contrast of the media as well as the influences of numbers of eigenfunctions, oversampling sizes, and subdomain partitions on the efficiency of the proposed preconditioner. Besides, strong and weak scalability performances are also examined. The work is partially supported by the Hong Kong RGC General Research Fund (Projects: 14305222 and 14304021).

Speaker: Prof. Eric Chung (Chinese University of Hong Kong)

12:15 Exploration of robust and fast L-splitting schemes for nonlinear double degenerate equations

Nonlinear advection diffusion equations model diverse physical phenomena.
Some examples include flow through porous media (as found in subsurface and reactive flows),biological processes, Stefan problem and permafrost models; and many others. In this work, we investigate numerical methods for nonlinear parabolic equations that show doubly degeneracy, i.e. for example the diffusion coefficient of the equation is allowed to vanish (degenerate diffusion) at zero concentration which leads to hyperbolic equation with free-boundaries as observed in nature, and become singular at full concentration leading to an elliptic problem. First we propose a semi-implicit (Backward Euler) time discretization. Implicit time stepping methods are popular due to their stability, allowing to avoid severe restrictions on the time step. This leads to nonlinear, time-discrete elliptic equations, for which linear iterative schemes are needed for approximating the solution, which combines the features of the Newton method and the L-scheme, i.e., a modified L-scheme. The linearization scheme is shown to be globally convergent (even for double degenerate cases). Moreover, it is linearly converging in the non-degenerate case accelerate with a small time-step. Numerical results will present which revealed that it is robust and stable when compared to the standard linearization schemes.

Speaker: Ayesha Javed (Hasselt University)

12:30 Stable unfitted finite element method for poroelasticity with weak discontinuity

The traditional finite element method requires that the mesh must match with various discontinuous, which can significantly increase the difficulty of preprocessing for hydrodynamic coupling problems with complex boundaries and material interfaces. In such case, the finite element method using unfitted mesh is obviously more advantageous, however, this method also has certain problems, for example, irregular mesh cutting may lead to ill-conditioned coefficient matrix to appear, which in turn affects the accuracy and stability of the algorithm. The ghost penalty technique was proposed to overcome the ill-conditioning issue. Recently, an unfitted finite element was proposed for two-field poroelasticity problem, where stabilization terms based on the ghost penalty were developed. Material interfaces are even more difficult to deal with than the boundary as they require careful treatment of the weak discontinuity conditions as well as the mesh cutting stabilization. In this paper, we formulate an unfitted finite element for the poroelastic problem with both material interfaces and complex boundaries. A weak formulation based on the Nitsche’s method was developed. Ghost penalty stabilization terms are designed for both sides of the elements intersected by the material interface. The performance of the proposed methodology is tested by several benchmark and practical hydraulic problems of complicated rock-soil mixtures. The numerical results demonstrate optimal convergence rates and low-level condition numbers independent of the mesh cutting.

Speaker: Prof. Zhijun Liu (Lanzhou Univ)

12:45 Multiscale Extended Finite Element Method for the Simulation of Fractured Geological Formations

In the prevailing context of the 21st century, characterized by a predominant reliance on oil and gas, or in the promising future where green energy shapes a human society committed to net-zero emissions, the role of underground fractured formations in energy production (geothermal) and storage remains pivotal and irreplaceable. In the past decade, hazardous consequences of failing to predict the geomechanics behaviors of fractured formations has led to a pronounced focus on developing simulation strategies that are both accurate and efficient for subsurface fractured formations.
As a widely used simulation method in fracture mechanics, the extended finite element method (XFEM) provides a precise approach to simulate deformation and fractures propagation within highly fractured media. It is also a convenient strategy as it allows for the use of structured grids. However, the expensive computational cost of using classical XFEM in the simulation of fracture networks makes this method not immediately suitable in the geoscientific community.
To resolve this challenge, a multiscale extended finite element method (MS-XFEM) is proposed to provide a novel approach to simulate the highly fractured subsurface formations accurately and efficiently. The deformation and fractures propagation are both simulated by interpolating the solutions from a larger yet sparser coarse grid to the original fine-scale grid. This interpolation process requires the construction of the basis functions matrix. The novelty of this work is to involve the fractures into basis functions only, thus the coarse scale system is constructed based on a standard finite element method. More importantly, this construction of basis functions is fully algebraic and can be updated locally and adaptively for the simulation of propagating fractures. This method has been implemented and tested to prove its efficiency and accuracy. All test results prove the good qualities of solutions computed from MS-XFEM when compared to fine scale XFEM solutions. Basis functions are constructed successfully with the algebraic method since they capture all different types of discontinuities. These tests reveal the potential of MS-XFEM in simulating real-world subsurface fractured formations.

Speaker: Fanxiang Xu

12:00 → 13:00 MS10: 2.2

12:00 Pore structure evolution of low-permeability sandstone under acid treatment: a Micro-CT investigation

The use of acid for permeability enhancement has gained popularity in mining and oil industries to enhance the recovery rate of low-permeability formations. This study employed static acid permeability enhancement tests, flooding acid permeability enhancement tests, and micro-CT scanning to investigate the mechanism of permeability enhancement and changes in pore structure during acid treatment. The extent of reaction between low-permeability sandstone samples and four different acids was evaluated by static tests, with hydrochloric and formic acids demonstrating good performance in dissolving filling minerals. Acid flooding experiments were conducted under reservoir conditions with a constant flow rate, and decreases in pressure difference between flow inlet and outlet were observed for most experiments, indicating an increase in permeability. The pressure difference was lower for hydrochloric acid compared to formic acid at the end of flooding, with permeability increases of 283% and 120%, respectively. Micro-CT scanning before and after acid permeability enhancement tests revealed changes in pores, pore throats, and coordination numbers using Avizo software. Based on micro-CT results, acid treatment led to an increase in the number of interconnected pores, pore throats, and their equivalent radii, resulting in higher permeability. The improved permeability was primarily due to the dissolution of dolomite, as identified by SEM-EDS and ICP.

Speaker: Prof. Liwei Zhang (Institute of Rock and Soil Mechanics, Chinese Academy of Sciences)

12:15 Void deformation and connecting visualization in asphalt mixture under dynamic water pressure

Water transport under dynamic vehicle load is the primary causation of asphalt pavement water damage. The dynamic water breaks through the inner voids and destroys the micro-structure of asphalt mixture, and consequently degrades asphalt pavement durability. Understanding the microstructure evolution and void connecting during dynamic water load contributes to the water damage mechanism of asphalt pavement.
This study developed a water seepage device for asphalt mixture and used pulse water pressure to simulate the dynamic water load caused by tire crimping. The pulse sinusoidal water pressure with a frequency of 10Hz and a range from 0 to 0.7 MPa was served. X-ray CT scanning was performed on the dry asphalt mixture and also in-situ seepage asphalt mixture after 3, 8, 15, and 20h water load. A 3D digital void model was developed to analyze the void structure evolution. The translation, volume changing, and connecting in void structure were recognized and analyzed. The 3D water-activated void and water passageway were reconstructed.
The result explained the variation of dynamic flow rate curves by analyzing the microstructure evolution during dynamic water pressure load. The deformation characteristics of voids were addressed and its contribution to water extension was analyzed. The 3D visible water passageway and saturation showed the dynamic water transport process and gave direct evidence of the macro seepage behavior variation.
This study proposes a method to quantify the void deformation in asphalt mixture and explains the macro seepage behavior from the micro aspect. It contributes to understanding the water transport in asphalt pavement and improving its durability.

Speaker: Hao Shi

12:30 Experimental study on optimization of acidizing acidizing fluid in heterogeneous oolitic limestone reservoir

The oolitic limestone reservoir of Qianjiang Formation in Jianghan Oilfield has the characteristics of shallow burial, thin layer, developed upper and lower water layers and strong heterogeneity, so it is difficult to be reformed on site. In order to optimize the transformation process and the optimal process parameters suitable for the reservoir, the core dissolution experiment and acid displacement experiment of two different acid systems of conventional acid and retarded acid were carried out in this paper. Combined with the analysis of CT scanning results, the action law of oolitic limestone and different acid systems, the quantitative characterization of permeability change at different injection rates and the CT three-dimensional imaging of acid etching pore characteristics were clarified; at the same time, according to the results of acid rock reaction kinetics experiment and acid etching conductivity experiment, the effective distance of acid rock reaction in different acid system is predicted theoretically, and the best acid system and injection parameters are optimized. The results showed that the optimum concentrations of hydrochloric acid and retarded acid were 20 % and 10 %, respectively. The displacement rate has no obvious difference in the increase of permeability after core acidification, but it has a great influence on the wormhole structure formed by acid etching. The increase of displacement rate will form wormholes with better connectivity and less damage to rock skeleton and physical properties; by calculating the experimental parameters of acid-rock reaction kinetics, it is found that the effective distance of retarded acid is 10 m longer than that of conventional acid under the same injection rate of large displacement acid. Finally, according to the characteristics of the reservoir, a large displacement injection of ' 10 % retarded acid + 0.3 % corrosion inhibitor ' acid system can effectively increase the acid action distance and enhance the transformation effect.

Speaker: Yanying Qu

12:45 Flow field tomography identifies and quantifies pore opening and clogging in sandstones

Fluid-rock interactions drive changes in porosity and permeability. This has important consequences for the flow field development in the complex porous material and thus controls the evolution of reactive transport processes. Important applications are in the vast field of reservoir rock alteration, e.g. by coupled dissolution and precipitation processes. While dissolution processes can cause local increases in pore space and permeability, they can also lead to pore throat blockage, which can cause formation damage due to precipitation reactions and particle retention in pore throats. Although these mechanisms are understood in principle, the direct changes in the flow field they cause are difficult to observe directly. Using positron emission tomography (PET), we show how flow field heterogeneities are quantitatively affected by the coupling of dissolution reactions and pore throat blockage by particles in a long-term experiment.

Specifically, we performed a dissolution experiment focusing on calcite cement in sandstones. While dissolution is responsible for a local increase in pore space, mobilized iron oxide and sheet silicate colloids are trapped and cause a local decrease in permeability. Direct comparison of sequences of PET-derived flow field data reveals a pattern of flow field modification during this experiment. PET thus becomes a key analytical tool to localize and quantify pore-scale flow field changes, in addition to recent advances focused on the identification of flow channeling effects of advective flow [1]and on the heterogeneity of diffusive flux in low permeability rocks [2].

1. Pingel, J. L.; Kulenkampff, J.; Jara-Heredia, D.; Stoll, M.; Zhou, W.; Fischer, C.; Schäfer, T., In-situ flow visualization with Geo-Positron-Emission-Tomography in a granite fracture from Soultz-sous-Forêts, France. Geothermics 2023, 111, 102705.

2. Bollermann, T.; Yuan, T.; Kulenkampff, J.; Stumpf, T.; Fischer, C., Pore network and solute flux pattern analysis towards improved predictability of diffusive transport in argillaceous host rocks. Chemical Geology 2022, 606, 120997.

Speaker: Cornelius Fischer (Helmholtz-Zentrum Dresden-Rossendorf)

12:00 → 13:00 MS13: 2.2

12:00 Quantifying oil- and water-wettable pore networks of the lacustrine- and marine-sourced shale oil reservoirs

Microscopic pore structure (both geometry and connectivity) characteristics control fluid flow and hydrocarbon movement in shale oil reservoirs. Considering the uniquely wide spectrum of pore sizes (nm to sub-mm), microscale mixed wettability, as well as the interplay of pore structure and wettability in organic-rich shale oil reservoirs, this work presents various approaches to quantifying the oil- and water-wettable pore networks for several important tight oil formations in China and USA with different depositions, as well as a range of maturation and mineral compositions. The approaches include the utility of different wetting fluids (deionized water or API brine, n-decane and/or toluene, isopropyl alcohol or tetrahydrofuran or dimethylformamide), fluid pycnometry, fluid immersion porosimetry after vacuum saturation, mercury intrusion porosimetry, nuclear magnetic resonance, and field emission-scanning electron microscopy. In particular, (ultra-) small angle neutron & X-ray scattering techniques, (U)SANS & (U)SAXS, are used to quantify the total (both edge-accessible and isolated) porosity and characterize pore size distribution in a pore length size from 1 nm to 10 m; in addition, the employment of contrast matching technique of (U)SANS enables the discrimination of accessible (open) pores and inaccessible (closed) pores to a particular liquid fluid. For example, our results show that the marine-sourced Bakken samples in USA have a relatively high total porosity (8.87-12.95%) with no more than 30% of the pores are accessible from sample surface, and are not preferentially wet by oil or water.

Speaker: Mr Cunjian Zhang

12:15 Theory of electrolyte solutions in a slit charged pore: Effects of structural interactions and specific adsorption of ions

The study of electrolyte solutions in confined geometries is crucial for developing energy storage devices and water purification systems. One challenge in this field is accurate modeling ion behavior while considering the interplay between ion-specific effects and electrostatic interactions. Although self-consistent field theory enables the simulation of ionic fluids, it overlooks several effects, such as short-range correlations of the ions. Recent research [1] incorporates into the grand thermodynamic potential of ionic fluid the short-range correlations of the ions and derives the mechanical equilibrium condition using the Noether's theorem formalism. In particular, the authors have derived the total stress tensor of ionic fluid taking into account electrostatic and steric interactions alongside the structural effects (short-range correlations).

In this work, we use the model developed by Blossey et al. [2], which takes into account both structural and steric interactions between ions. The structural interactions are described through a bilinear form of the gradients of the local ionic concentrations, while the steric interactions are modeled using the lattice gas approach.This framework allows for a phenomenological description of the molecular properties of ions, such as steric interactions due to their non-spherical shape, changes in configuration, and the influence of the solvent. Additionally, we investigate the specific interactions between ions and pore surfaces by incorporating external attractive forces.

Our main interest lies in analyzing how ionic concentration profiles and disjoining pressure are influenced by variations in pore size. Starting from the local mechanical equilibrium condition, we derive a general formula for the disjoining pressure.
Our findings [3] indicate that taking into account the structural interactions between ions leads to a pronounce minimum in the disjoining pressure curves at small pore widths. This minimum is attributed to the formation of electrical double layers on the electrically charged surfaces of the pores.In addition, our results indicate that the attractive interactions between ions and the pore walls contribute to the formation of this minimum and shift it to smaller pore sizes. These theoretical findings have practical implications for researchers in the field of electrochemical engineering for supercapacitors, particularly in applications involving porous electrodes filled with concentrated electrolytes and room temperature ionic liquids.

[1] Brandyshev P. E., Budkov Y. A. Noether’s second theorem and covariant field theory of mechanical stresses in inhomogeneous ionic liquids. The Journal of chemical physics. – 2023.– Т. 158. – No. 17.
[2] Blossey R., Maggs A. C., Podgornik R.Structural interactions in ionic liquids linked to higher-order Poisson-Boltzmann equations. Physical Review E. – 2017
[3] Victoria A. Vasileva, Daria A. Mazur, Yury A. Budkov. Theory of electrolyte solutions in a slit charged pore: Effects of structural interactions and specific adsorption of ions. Journal of Chemical Physics. 2023. Vol. 159. No. 2. Article 024709

Speaker: Daria Mazur (Laboratory of Computational Physics, HSE University,)

12:30 Using fractal theory to study the influence of movable oil on the pore structure of different types of shale: A case study of the Fengcheng Formation shale in Well X of Mahu Sag, Junggar Basin, China

In order to investigate the influence of movable oil on the pore structure of various shale types, this study systematically selected 19 shale samples from Well X in the Mahu Sag of the Junggar Basin. Initially, X-ray diffraction (XRD) analysis was conducted to classify the shale samples. Subsequently, the geochemical properties and pore structures of the samples, both pre and post oil extraction, were comparatively analyzed through Total Organic Carbon (TOC) content measurement, rock pyrolysis, and nitrogen adsorption experiments. Additionally, fractal theory was employed to quantitatively describe the impact of movable oil on the pore structure of different shale types.
The findings reveal that siliceous shale exhibits a higher content of movable oil compared to calcareous shale. Following oil extraction, there was a notable increase in both specific surface area and pore volume across all shale samples, with a more pronounced variation observed in the pore structure of siliceous shale as opposed to calcareous shale. Calcareous shale predominantly displays H2-H3 type hysteresis loops, indicative of ink-bottle-shaped pores, suggesting a relatively uniform pore structure. Conversely, siliceous shale exhibits a diverse range of hysteresis loops, reflecting its complex pore structure. The fractal dimension of calcareous shale samples appears primarily influenced by pore structure, exhibiting no significant correlation with TOC content before or after oil extraction. Conversely, the change in fractal dimension of siliceous shale samples demonstrates no clear correlation with either TOC content or pore structure, suggesting that variations in fractal dimension may arise from the combined effects of TOC and pore structure.

Speaker: Ms Hong Zhang (Peking University)

MS13_1017_Hong Zhang.pdf

MS13_1017_Hong Zhang.pptx

12:00 → 13:00 MS15: 2.2

12:00 A deep learning enabled massive parallel simulator for porous media flow

Due to the complex composition of oil and gas resources, reservoir engineers usually switch between different mathematical models when describing the properties of petroleum reservoirs. In addition to the commonly used black oil model, various compositional models have been proposed. Some EOR techniques, such as polymer flooding, must be simulated based on the framework of compositional models. Some other applications of porous media flow, such as CO2 sequestration, groundwater contamination, and geothermal resource development, can also be simulated using compositional models. But the compositional models tend to be associated with more complex PDEs, more variables, and higher computational costs. In this talk, we will discuss a general-purpose compositional framework and our efforts in developing its solution methods, including discretizations, nonlinear solvers, linear solvers, parallelization and AI capabilities. Furthermore, we will introduce an open-source software project for simulating multi-component multi-phase porous media flow.

Speaker: Prof. Chensong Zhang (Academy of Mathematics and Systems Science)

12:15 Application of Machine Learning and Deep Learning Methods in Reservoir Development

Machine learning (ML) has revolutionized various aspects of underground seepage, geological modeling, reservoir numerical simulation, production optimization, and big data analysis in the oil and gas industry. In particular, when it comes to reservoir development, ML methods, e.g., deep learning (DL) and intelligent computing, have proven to be superior to traditional methods in terms of effectiveness and efficiency. Our study focuses on the application of cutting-edge ML methods to real-time reservoir optimization problems. The research includes reservoir history matching, well placement optimization, production optimization, wellbore fault diagnosis, big data analysis, and so on. Through extensive research and experimentation, we have observed that ML-based methods, especially DL methods, not only enhance the performance of traditional techniques but also significantly reduce the computational effort. They can quickly give reliable prediction results for variables of interest almost within seconds. ML-based methods can also accurately predict the performance of stimulation measures in oilfields, where an ML-based model is obtained with only available data, instead of expert knowledge in oilfields utilized in traditional patterns. These findings demonstrate the immense potential of ML methods in improving the performance of traditional techniques, providing valuable insights for practical oilfield management and development.

Speaker: Prof. Kai Zhang (China University of Petroleum (East China);Qingdao University of Technology)

12:30 3D Pore Segmentation and Pore-Scale Simulation by Deep Learning

Objectives
This study aims to optimize the characterization and prediction of permeability and relative permeability in porous media through a multi-faceted approach. The primary objectives include achieving accurate 3D reconstruction of rock core images, implementing advanced deep learning models for segmentation, and addressing computational challenges associated with the Lattice Boltzmann Method (LBM) for permeability calculations. Furthermore, the goal is to enhance scalability by training models on relatively small representative elementary volumes (REVs).
Methodology
In this work, we perform the data acquisition of rock core images through CT scanning, followed by the 3D reconstruction of multiple 2D slices. We develop deep learning-based segmentation models to enhance pore segmentation, including 3D UNet, Attention-3D UNet, and 3D UNet-transformer. To resolve the computational bottleneck of LBM for large REV, we develop 3D-CNN models to take 3D segmented pore images offered by the segmentation network as input and learn to predict labels of permeability and relative permeability curves generated by LBM solver at relatively small REVs. Once trained, these 3D-CNN models can predict rock properties on a larger REV without computational limitations.
Results
The 3D reconstruction using the 2D slices yields highly accurate representations of rock core images. Subsequent segmentation employing 3D UNet, Attention-3D UNet, and 3D UNet-transformer identify the most accurate and effective porous network, providing valuable insights into the rock structure. The segmentation model achieves scalability by efficiently predicting permeability for larger REVs by addressing the computational challenges associated with LBM. The permeability and relative permeability values determined through up-scaled predictions of the trained model closely align with LBM data, affirming the reliability and utility of the integrated approach. This research contributes a comprehensive and efficient workflow for permeability prediction in porous media, combining advanced imaging, deep learning segmentation, and permeability prediction.
Additive Information
The deep learning-based workflow developed in this work can efficiently solve the scalability limitation of physics-based solvers, such as the Lattice Boltzmann Method, as it can accelerate the computation and extend to predicting permeability in larger REVs, which is about scalability. This dual advantage of efficiency and scalability represents a notable breakthrough, highlighting the efficiency and effectiveness of our methodology in overcoming the limitations occurring in digital rock.

Speaker: Haotian Li

12:45 A multi-well deep learning model considering geological and engineering parameters for the long-term forecasting of shale gas production

The production forecasting of shale gas wells is an important research topic in the natural gas industry. The underground pore structure is extremely complicated after hydraulic fracturing. Conventionally, researchers try to construct forecasting models via theoretical or experimental approaches. However, both theoretical and experimental approaches are faced with difficulties. Firstly, many parameters required during the theoretical computations cannot be timely or accurately measured, which limits the usage of theoretical models. Secondly, experiments can hardly match the real scale since a typical shale gas well has several thousand meters in length and depth. As a result, machine learning has become a popular modelling approach in the production forecasting of shale gas wells under complex pore structures induced by hydraulic fracturing.

With the large-scale development of shale gas blocks, an increasing number of production records as well as geological and well completion data is becoming available. This enables the construction of shale gas production forecasting models using dynamic time series data as well as static geological and well completion data. The former represents the historical production features of a well while the latter reflects the underground pore structure. Nevertheless, most existing methods do not incorporate static parameters into the modelling process. Moreover, most existing methods apply a single-well modelling scheme where a model specifically trained for a target well is constructed. This scheme has two major flaws when it comes to field application. Firstly, it overlooks useful information from other existing wells in the same production block. Secondly, it requires a long piece of initial data for training and therefore cannot be used on newly developed wells. The problems faced with single-object methods have also been addressed in many other fields where the use of a long piece of initial data is impractical [1].

Considering the problems in existing shale gas production forecasting models, we propose a multi-well long-term forecasting model with static parameters. The proposed model is built on recurrent and fully connected neural networks and is trained on both production and static data from multiple existing wells. Since the training process does not need a long piece of production history from the target well, the proposed model can be used on a newly opened or re-opened well after a short initial period (for example, 14 days). Then, the long-term forecasting can be carried out iteratively using previously forecasted values. Therefore, the proposed model can achieve timely forecasting of shale gas production with both time-series data and pore structure after fracturing taken into consideration. The accuracy and usefulness of machine-learning-based shale gas production forecasting models are thus improved.

Speaker: Yilun Dong (University of Science and Technology of China)

12:00 → 13:00 MS17: 2.2

12:00 Advanced 4D Imaging of Shales at Micro- to Nano-scale: Investigating the time-lapse evolution Under Subsurface Thermal, Hydrological, Mechanical, and Chemical Conditions

Mudstones and shales are the source of unconventional oil and gas reservoirs, as well as the primary control on the sealing efficiency for subsurface storage applications (e.g. energy, CO2, H2, waste). However, their fine-grained and heterogeneous nature makes their full characterisation highly challenging. Here we demonstrate the multi-scale and dynamic imaging approaches that can help meet these challenges and discuss limitations and future opportunities.
Microstructures can be characterised at scales from sub- nm (<1 nm) to over 1 m, using multi-scale and multi-model imaging approaches [1-3], including X-ray tomography, Focused Ion Beam Scanning Electron Microscope and Transmission electron microscopy tomography. The majority of pores in mudstones/shales range from 0.2 nm to 3µm, and we have documented 4 major types with 3 distinct size distributions [4]. Based on the REV analysis, pore sizes, types and distribution can be upscaled via three stages from sub-nm to cm-scale[5]. The permeability is pressure dependant, ranging from 1.0×10-17 to 1.0×10-22m2 [3, 5]. CO2 adsorption is 3-7 times higher than CH4 and over 10 times higher than H2 [6]. Image based modelling has demonstrated that the non-Darcy effects (e.g., slip flow and Knudsen diffusion). Adsorption/desorption and surface diffusion takes major controls over time after injection [7].
Dynamic imaging of mudstones/shale has provided the opportunity to characterise the thermo-hydro-mechanical-chemical (THMC) properties and the coupling mechanism in mudstones/shales to investigate the sealing ability under realistic reservoir conditions. These include high temperature (from less than 10 °C up to 1000 °C) [8], high pressure (e.g. confining pressure, indentation, torsion, deformation and fractures; up to 65 MPa) [9], fluids (e.g. diffusion, adsorption, flowing through, multi-phase flow) [10] and complex chemistry environment (brine and drilling fluids) [11]. Based on the dynamic behaviours observation and quantification, It can be concluded that mudstone/shales with horizontally thin-layered laminations, few fractures and less reactive minerals may act as the best caprocks.
Whilst the above has led to an improved understanding of shale/mudstone microstructure under static and dynamic conditions, significant challenges still remain regarding representivity and up-scaling, experimental analysis at subsurface-realistic temperatures, pressure and chemistry, accurate estimations of the long-term behaviours and the proper monitoring techniques.
1. Taylor, K. G., & Ma, L. 2021. GeoExpro, Vol. 18, No. 1 - 2021. 2. Ma, L., et al., 2017. International Journal of Coal Geology, 180, 100-112. 3. Ma, L. et al., 2016. . Marine and Petroleum Geology, 72, 193-205. 4. Ma, L., et., al 2019 . Scientific reports, 8(1), 1-14. 5. Ma, L., et al., 2019. Energy, 181, 1285-1297.6. Ma, L. et al. 2021. Energy & Environmental Science, 14(8), 4481-4498. 7. Guo, B., et al., 2018. Advances in Water Resources, 122, 70-84. 8. Wang, K., et al., 2021. International Journal of Coal Geology, 244, 103-116. 9. Figueroa Pilz, F., et al., 2017. Journal of Geophysical Research: Solid Earth, 122(4), 2553-25, 11. Godinho, J. R., et al., 2019). Minerals, 9(8), 480.

Speaker: Lin Ma (University of Manchester)

12:15 Lattice Boltzmann simulation of water distribution and its effect on methane adsorption in nanoporous shale

Water vapor sorption in nanoporous media with complex pore structures, such as shale, remains poorly understood. Moreover, the initial water saturation in shale gas reservoirs affects methane's adsorption capacity, posing a challenge for accurate gas reserve estimation. Current methods, including molecular dynamic simulation, sorption experiments, and analytical modeling, have limitations in intuitiveness, research scale, and idealism, respectively.
To tackle this issue, a pseudopotential lattice Boltzmann method (LBM) is developed to explore water sorption and its impact on methane adsorption. This LBM model integrates long-range molecular forces using a modified Shan-Chen model based on the Carnahan-Starling equation of state. Validation of the LBM's simulation for water vapor sorption includes assessments of liquid/vapor densities in phase separation, vapor pressure around liquid droplets, and film thickness in parallel nanoslits using disjoining-pressure theory. For methane sorption, the LBM's validation involves lattice density functional theory and methane sorption experiments.
The findings reveal that water films in nanopores create a liquid pressure disparity of up to 100 MPa between confined and free states. Traditional adsorption theories based on simplistic pore shapes do not apply to nanoporous systems with complex geometries. In inorganic matter, hydrophilic attraction forces result in "small pores filled with liquid water and large pores covered by water film," whereas organic matter shows no water presence due to hydrophobic repulsion forces. Different water saturation levels significantly affect the relationship between pore-throat configuration and organic pore distribution, impacting effective flow pathways. The initial water saturation in shale gas reservoirs restricts methane adsorption solely to organic pore surfaces, substantially reducing available methane adsorption sites. Particularly in continental/transitional shale gas reservoirs with high clay contents, the influence of water distribution on methane adsorption needs consideration.
The proposed LBM demonstrates its ability to model sorption processes within complex porous structures efficiently. This work offers critical insights into water sorption behavior in shale's nanopore systems, laying the groundwork for modeling liquid-vapor distribution in nanoporous media at the pore scale. In addition, these findings provide theoretical support for estimating gas adsorption content and reservoir numerical simulation for shale gas reservoirs.

Speaker: Tao Zhang (Southwest Petroleum University)

12:30 A Coupled THMC Model for Simulating In-situ Conversion process in Low-Medium Maturity Shale Oil Reservoir

Continental shale oil in China is mainly of low-medium maturity, filled with heavy oil of low mobility and organic matter that unconverted. Horizontal drilling and hydraulic fracturing are insufficient to obtain economic production in such reservoir, thus in-situ heating and transform technology should be applied. A multiphase multicomponent thermal-hydraulic-mechanical-chemical (THMC) coupling numerical model considering multistage kinetic reactions and solid-fluid mass conversion is developed to describe the decomposition of solid organic matter, cracking of heavy hydrocarbon, phase behavior and rock property evolution.
During the in-situ process, organic matter (kerogen) decomposition and heavy oil cracking happens, enhancing hydrocarbon mobility. The research focuses on the development of multiphase multicomponent THMC coupling model, with the evolution of porosity and permeability considered. The FVM is used for the space discretization of flow and heat transfer equation, and the open system geomechanics model is discretized with FEM. Then the fixed-stress split method is applied to solve the THMC coupling model. Finally, the impact of important parameters on cumulative production are analyzed.
The impact of parameters including heating temperature, kerogen concentration, well bottom hole pressure, heater pattern and initial water saturation on cumulative production is analyzed. The results are summarized as: kinetic reaction rate is controlled by temperature and different reactions take place at variety heating temperature, influencing the fluid composition; higher kerogen concentration can enhance cumulative hydrocarbon production after in-situ conversion, making it an important parameter to evaluate before production; low bottom hole pressure can extract hydrocarbon products in time to prevent from further cracking and coking; different heater pattern has impact on the ratio of energy output to energy input, and hexagon heater is the most benefit; high water saturation will enhance energy consumption to heat water and reduce the utility ratio of energy, thus dewater process is required to reduce water saturation. It can be concluded that the in-situ conversion process is feasible in low-mid maturity shale oil reservoir, during which kerogen decomposition and hydrocarbon cracking happens. Besides, the operating parameters should be investigated to make the heating process economical.
The proposed model provides an efficient tool for modeling the in-situ conversion process of low-mid maturity shale oil reservoirs. In this paper, the reservoir fluid property variation, in-situ porosity and permeability evolution, and production characteristics are illustrated, which could provide insights on heater design and well operational management. With multiple transport mechanisms and multi stage kinetic reactions incorporated, the hydrocarbon production characteristics and formation property evolution of shale reservoirs can be both accurately captured.

Speaker: Zijie Wang (China University of Petroleum (East China))

12:45 Application of Automated Mineralogy in Fluid-Solid chemical reactivity transmission on reservoirs

Automated mineralogy (AM) is a semi-automatic mineralogical tool based on a scanning electron micrography-energy dispersion spectrometry (SEM‒EDS) platform. It has the functions of large-area high-resolution field image scanning, particle mineralogical analysis, specific mineral search, trace mineral search and so on. It can realize the identification and quantification of core minerals, surface porosity and pore morphology, mineral particle size and pore distribution characteristics, element occurrence form and so on. Therefore, AM data can be used to analyze the sedimentary environment and diagenetic evolution process of oil and gas reservoirs and even to evaluate oil and gas reservoirs. The best highlight of AM is that the large-area images provide a reference for selecting sites for further nano-micro structure analysis. The linkage procedure of AM images and FE-SEM facilitates the observation of the same nano-micron scale mineral or pore changes after different fluid actions. This technique is beneficial for studying the effect of fluid chemical reactivity transmission on reservoirs during reservoir development or CO2 geological storage. The mineral distribution phase diagram obtained by AM can be registered with the same position CT scan image, which can improve the accuracy of CT data to distinguish minerals. However, because AM itself is not good at identifying the fine types of clay minerals and because some mineral densities are similar, it increases the difficulty of CT image registration and segmentation, so the accuracy of the constructed 3D mineral distribution needs to be improved. With the improvement of the registration algorithm and in situ CT scanning accuracy, the combination of AM and CT will play a more important role in the study of the fluid reactive transport effect during reservoir development or CO2 geological storage, especially in the study of short-lived minerals and pore changes, as well as fluid migration.

Speaker: Shijie Yan (Northwest University)

14:00 → 15:30 MS01: 2.3

14:00 Investigation of the effect of capillary number, working pressure and hysteresis on hydrogen storage and recovery efficiency using a CFD approach

A crucial aspect of maximizing hydrogen storage and recovery in aquifers is understanding the flow dynamics of hydrogen-water. By gaining insights into these interactions at the pore scale, researchers can develop more efficient strategies for optimizing storage capacity and extending the production life span in aquifers. This progress ultimately contributes to advancing underground hydrogen storage technologies for practical applications. This study uses computational fluid dynamics (CFD) simulation to investigate the impact of flow regime, pressure, compressibility, and hysteresis on the pore-scale flow patterns of hydrogen-water and recovery efficiency during underground hydrogen storage. The findings indicate the hydrogen-water displacement efficiency is significantly affected by the capillary number. We found that different flow rates are favorable during hydrogen injection and production, and that a medium flow rate corresponding to specific capillary numbers can minimize capillary and viscous fingering mechanisms, leading to improved storability and recovery factor. It was shown that the expansion of gas near the outlet of the porous medium alters the local flow patterns, specifically at low-pressure systems. This highlights that during low-pressure experiments, this effect may go unnoticed and that can potentially impact the storage and withdrawal efficiency of hydrogen. Additionally, the research reveals that trapped hydrogen bubbles can create a "self-cushion effect" during the cyclic process, which is eliminated at capillary numbers higher than 10^(-4). While no consistent trend was observed for the effects of this phenomenon on the hydrogen recovery factor, the results indicate a slight enhancement of hydrogen storability in the 3rd cycle due to the self-cushion effect.

Speaker: Prof. Hassan Mahani (Sharif University of Technology)

14:15 The Impact of Water Saturation on Hydrogen Adsorption in Clay-rich Caprocks

Underground Hydrogen Storage (UHS) plays a pivotal role in the shift towards renewable energy resources, necessitating paramount attention to safety and efficiency. To maximize the recovery of stored hydrogen and ensure a reliable seal against leakage, it is crucial to comprehend the propensity for hydrogen migration through caprock. The migration may occur within the pore solution, where small H2 molecules can readily diffuse through pores and fractures of the seal. Accurate risk analysis requires a thorough assessment of hydrogen loss through the caprock, emphasizing the significance of hydrogen transport properties, including adsorption and diffusion. However, due to safety concerns surrounding hydrogen gas, comprehensive data on its interaction with various natural settings remains scarce. This study investigates the hydrogen adsorption of various natural and synthetic materials, including four shale samples from the Norwegian Continental Shelf and three standard clays. The samples underwent extensive characterization tests, such as X-ray Diffraction (XRD), X-ray Fluorescence (XRF), Scanning Electron Microscopy-Energy Dispersive Spectroscopy (SEM-EDS), and BET analysis. High-pressure gas adsorption analysis was conducted to measure hydrogen sorption isotherms. The experiments included dried and wet samples, with and without prior treatments. The results reveal that swelling clays, particularly those from the Smectite group, have a higher hydrogen uptake capacity. Additionally, when wet clay samples were examined, the presence of water resulted in competition between water and hydrogen for binding sites within the clay, leading to a decrease in hydrogen adsorption. The comprehensive testing and analysis conducted in this study provide valuable data for future risk assessments and enhance our understanding of geological hydrogen storage in various geological formations.

Speaker: Mohammad Masoudi (University of Oslo, Department of Geosciences)

14:30 Ostwald Ripening Leads to Less Hysteresis during Hydrogen Injection and Withdrawal: A Pore-Scale Imaging Study

Utilising depleted hydrocarbon reservoirs or aquifers for hydrogen storage shows promise due to their substantial storage capacity. Efficiently managing hydrogen storage requires careful consideration of hysteresis across multiple cycles. Hydrogen experiences both injection and production, usually on a seasonal basis, impacting both hydrogen recovery and pore space entrapment. Our study investigates the capillary pressure hysteresis induced by this cyclic injection and withdrawal process, employing X-ray tomography. This exploration holds potential for optimising subterranean hydrogen storage systems. Conducting experiments under dynamic conditions, we analysed gas and water distribution within distinct pore space geometries during drainage and imbibition cycles. We injected the gas phase into 6 cm long samples of Bentheimer sandstone at ambient temperature and 8 MPa pore pressure, followed by three water flooding cycles. Varied gas saturation levels—high, medium, and low—were achieved while maintaining a constant brine flow rate, allowing a comprehensive exploration of distribution dynamics. Throughout these cycles, our observations unveiled intriguing phenomena: (I) capillary pressure hysteresis and (ii) hydrogen migration through Ostwald ripening. Contrary to conventional models, our results suggest the possibility of surpassing the presumed residual gas saturation through further injection and withdrawal, challenging the assumed gas recovery limit. To further understand these phenomena, we analysed interfacial curvature and area, conducted wettability assessments, and performed pore occupancy analysis. These insights offer a pore-scale understanding of hydrogen storage dynamics, providing crucial image-based data essential for modelling multiphase flow properties in reservoir-scale simulations.

Speaker: Martin Blunt (Imperial College London)

14:45 Investigating multiphase flow dynamics in rock fractures via XCT imaging for hydrogen storage optimization

The global climate change crisis has heightened the current focus on sustainable energy solutions, where hydrogen has emerged as a promising candidate for clean and efficient energy storage. However, effective and scalable storage of hydrogen remains a major challenge. Underground rock formations, including fractured reservoirs, offer a potentially impactful solution for hydrogen storage. This research investigates multiphase flow dynamics within rock fractures to optimize hydrogen storage strategies. We focus on a karstic aquifer formation currently used to store natural gas in Loenhout, Belgium. Leveraging state-of-the-art X-ray micro-computed tomography (XCT) imaging, we study the dynamic behavior of gas displacing the brine within intricate networks of rock fractures.

We employ core flooding experiments coupled with XCT imaging to investigate the pore-scale dynamics of drainage and imbibition in rock fractures. Recognizing the challenges of sampling natural fractures, we induce artificial fractures in samples with low initial permeability from the Loenhout formation, using the Brazilian tensile test method. The experiments are conducted on mm-scale cores featuring fractures with a size on the order of 102 microns, allowing us to capture intricate flow features at a resolution of 6 microns. The study involves the injection of three different gases; hydrogen, methane, and a hydrogen-methane mixture—through brine-saturated fractures.

We analyse the fluid distribution and differential pressure response throughout drainage and imbibition at two different capillary numbers. This research methodology integrates advanced image processing and computational fluid dynamics simulations to extract quantitative data from the XCT images. This approach facilitates a nuanced understanding of gas transport mechanisms, capillary pressure effects, and the influence of fracture characteristics on multiphase flow dynamics under varying gas compositions.

Preliminary results offer insights into fracture permeability, aperture distribution, and the impact of geological heterogeneity on hydrogen migration. The study also aims to highlight the impact of different gases on preferential flow paths within fractures, thereby influencing the spatial distribution and storage efficiency of hydrogen and methane .

Speaker: Sojwal Manoorkar (Ghent University)

15:00 Microstructural heterogeneity and alteration of reservoir sandstones with experimental exposure to hydrogen

Energy storage is becoming an increasing concern as the world transitions towards unpredictable renewable energy production. Hydrogen is expected be a key player as it can be produced through electrolysis of water using renewable electricity and used as a clean energy carrier to decarbonise industry, hence hydrogen storage is energy storage. Its small molecule size and low density means large-scale storage (TWh) is only feasible in the subsurface, such as porous reservoirs of saline aquifers. These are stratigraphically and geographically widespread globally. Porous storage of hydrogen is yet to be implemented, hence the influence of injected hydrogen on the subsurface under reservoir conditions (elevated temperatures and pressures) remains unknown. This includes geochemical reactions instigated from interactions between minerals, pore-fluid, and hydrogen within rock microstructure. It is essential that containment of hydrogen in porous rocks is proven prior to implementation, and that reservoir behaviour is comprehensively understood. As hydrogen must remain in the reservoir as expected and be recoverable in high volumes and purity.
This study relates to a larger collaboration between the British Geological Survey, Industrial Decarbonisation Research and Innovation Centre, and the University of Manchester. That provides lab-based microstructural characterisation and assessment of changes in reservoir rock properties caused by exposure to hydrogen in batch-reactor experiments under reservoir conditions (50oC & 150 bar). Reservoir rocks analysed are considered representative of possible targets for onshore hydrogen storage in the UK (Sherwood Sandstone and Lower Greensand reservoirs). Samples were thoroughly characterised pre- and post- experiment through a multitude of multi-scale imaging and measurement techniques, with a particular focus on x-ray computed tomography to reveal internal structure non-destructively. This exposed the microstructural heterogeneity within sandstone reservoirs, as well as microstructural alteration following hydrogen exposure. Sherwood Sandstone samples, although compositionally similar, exhibit two prominent textures. Channel-base with moderately sorted grains and a restricted pore network containing preferential alignment (porosity 8.95%; mean pore size 41.54µm). And the more dominant channel-fill, also moderately sorted but the pore-network is well-connected (porosity 24.47%; mean pore size 187.33µm). Lower Greensand samples have extremely variable microstructure and composition dependent on sample formation. Hythe Formation is well-sorted with a well-connected pore network (porosity 28.42%; mean pore size 174.90µm) dominated by quartz, glauconite, and muscovite. Instead, the Sandgate Formation is poorly sorted with a restricted pore network (porosity is much lower 15.34% and mean pore size 36.36µm) and is composed of quartz, calcite, and feldspar.
Overall, no major changes to rock microstructure or composition were observed following hydrogen exposure. This is important as it suggests the reservoir investigated are safe for hydrogen storage, which is promising for the UK. However, the migration of a fine particle was seen within one sample. The experimental design may have influenced other minor changes observed, such as grain loss around the edges of samples. Although no conclusive alterations have been seen in the results of these experiments, it remains possible that geochemical reactions will occur in reservoir compositions containing more reactive minerals, such as those rich in pyrite and anhydrite. Hence further investigation is required.

Speaker: Heather Braid (PhD Student)

15:15 Pore-scale Diffusive Mixing Between Hydrogen and Carbon Dioxide: Implications for Underground Hydrogen Storage

Underground hydrogen storage (UHS) is recognized as a viable solution for storing significant amounts of hydrogen (H2) in the advancement of a low carbon energy system. The diffusive mixing between H2 and cushion gas, which leads to a reduction in the purity of produced H2, persists through the entire storage period. Therefore, it is crucial to understand the diffusive mass transfer and its impact on the migration of H2. Due to experimental challenges, there is limited research dedicated to quantifying the diffusion between H2 and cushion gas under reservoir conditions. For the first time, we measured the diffusive process between H2 and CO2 (acting as the cushion gas) in a high-pressure capillary cell in situ. The time-dependent Raman spectroscopy was used to monitor the diffusive mass transfer, and the diffusion coefficient was determined based on the measured concentration profiles. We showed that the diffusive process was adequately captured by the Fick’s second law with a constant diffusion coefficient. The diffusion coefficient scales linearly with the reciprocal viscosity of CO2 across the pressure and temperature range associated with subsurface storage conditions. Based on the measured diffusion coefficient, we quantified the diffusion distance for the mixing occurring at field-scale. Results indicate that the mixing between H2 and CO2 can reach tens of meters over a one-year period. This suggests that the dispersive mixing plays a role in the purity of produced H2.

Speaker: Dr Zhe Wang (College of Marine Science and Technology, China University of Geosciences (Wuhan))

14:00 → 15:30 MS03: 2.3

14:15 Research on Fracture Propagation Law of Shale Hydraulic Fracturing Based on Mineral Interface Effect

To address the scientific problems of fracture initiation and expansion of hydraulic fractures in the process of shale gas reservoir extraction, this paper focuses on the influence of shale minerals on fracture initiation and expansion of hydraulic fractures under the influence of mineral interface, establishes a geometric model of random distribution of shale minerals at the microscopic scale, and uses the cohesion model to characterize the mineral interface, and constructs a microstructure model of shale considering the influence of mineral interface. Numerical simulations are used to study the effects of mineral interface stiffness, mineral content and mineral grain size on hydraulic fracture expansion, and the fracture expansion pattern of shale hydraulic fracture under the influence of mineral interface is obtained. The results of the study help to reveal the mechanism of shale minerals on hydraulic fracture extension under the influence of mineral interface, and provide a theoretical basis for the reasonable selection of hydraulic fracturing layer in shale gas reservoir. The results show that.
(1) The mechanical response of mineral interface to shale is more obvious, and when subjected to external force, the damage appears first at the mineral interface, and then the damage starts to occur gradually inside the mineral, and the damage inside the quartz mineral is the largest, and the damage inside the clay mineral is the smallest. (2) As the stiffness of mineral interface increases, short and wide cracks are formed more easily; as the percentage of brittle minerals increases, long and wide cracks are formed more easily; when the mineral grain size increases from 40μm to 60μm, long and wide cracks are formed more easily, and when the mineral grain size increases from 60μm to 80μm, short and narrow cracks are formed more easily, and the form of crack damage is mainly tensile damage. (3) The shale hydraulic fracturing operation should give priority to the fracturing of layers with low mineral interface stiffness, high brittle mineral content and large mineral grain size, which is conducive to the construction of seepage channels in shale reservoirs and improving the transport capacity of shale reservoirs.

Speaker: Mengru Hou

14:30 Prior ensemble based on geomechanical proxy model for data assimilation in naturally fractured reservoirs

Fractures can facilitate or alter fluid flow and transport in subsurface reservoirs. Consequently, their accurate characterisation is crucial for various applications, including geothermal heat extraction and carbon sequestration. Yet, direct measurement of relevant fracture parameters is difficult. Access is limited to wells, leading to significant uncertainties, particularly in estimating fracture aperture and length – key factors influencing flow and transport. The application of indirect methods, including outcrop analogue studies, geophysical imaging, tracer tests and production logging, is vital to mitigate these limitations. It is particularly effective when combined with data assimilation techniques like ensemble Kalman filters.

This study uses a fracture pattern with more than 3500 individual fractures mapped on aerial photographs (Odling, 1997). We assume that the fracture geometry is known a priori and focus on fracture aperture as the uncertain parameter. The fractures are subjected to a constant far-field stresses, causing critically stressed ones to shear and dilate. We represent this behaviour with the empirical joint constitutive model of Barton & Bandis (Barton et al., 1985). However, the exact aperture values remain unknown, as they depend on uncertain model parameters like fracture roughness and rock properties. Our goal is to reduce these uncertainties using an ensemble smoother with multiple data assimilation (ES-MDA) (Emerick & Reynolds, 2013) that will be informed with synthetic flow and transport data. Particular attention is given to the influence of the prior ensemble on the performance of the data assimilation framework.

Calculating individual realisations of the prior ensemble with a geomechanical simulator can become prohibitively expensive, especially when a large ensemble size is required. A cheaper, purely stochastic approach on the other hand does not incorporate all geological knowledge. As a compromise between these two methods, we generate the prior ensemble based on the far-field stress approximation (FFSA), a proxy model which projects the far-field stresses onto the fracture planes and approximates shear displacement with linear elastic theory. The FFSA is computationally efficient as it does not rely on geomechanical simulations, while still incorporating geological knowledge to some degree.

Our results demonstrate that FFSA-based prior ensembles significantly outperform stochastic ones, leading to more accurate estimations of fracture aperture and an improved alignment with synthetic reference data. Further, the FFSA requires smaller ensemble sizes than the stochastic approaches as it models aperture more accurately. We expect that these results can be generalised to other ensemble-based DA methods, for example particle filters.

Speaker: Michael Liem (Institute of Fluid Dynamics, ETH Zurich)

14:45 Rigorous Derivation of Discrete Fracture Models for Darcy Flow in the Limit of Vanishing Aperture

We consider single-phase flow in a fractured porous medium governed by Darcy's law with spatially varying matrix-valued hydraulic conductivities in both bulk and fractures. In particular, we account for general fracture geometries parameterized by aperture functions on a submanifold of codimension one. Given a fracture with a width-to-length ratio of the order of a small parameter $\varepsilon$, we derive limit models as $\varepsilon \rightarrow 0$. In the limit $\varepsilon \rightarrow 0$, we obtain discrete fracture models where fractures are represented as submanifolds of codimension one. The limit models provide a computationally efficient description with explicit fracture representation, while avoiding thin equi-dimensional subdomains with a need for highly resolved meshes in numerical methods. The ratio $K_\mathrm{f}^\star / K_\mathrm{b}^\star$ of the characteristic hydraulic conductivities in the fracture and bulk domains is assumed to scale with $\varepsilon^\alpha$ for a parameter $\alpha \in \mathbb{R}$. Depending on the value of $\alpha$, we obtain five different limit models as $\varepsilon \rightarrow 0$, for which we present rigorous convergence results. Additionally, preliminary results are also available for the case of two-phase flow.

Speaker: Maximilian Hörl (University of Stuttgart)

15:00 Study of fluid filtration in fractured rocks based on field observations

The development of oil deposits is carried out with the injection of water to maintain reservoir pressure. At high values of layered reservoir heterogeneity and oil viscosity, the likelihood of uneven advance of the displacement front through formations with low filtration resistances and premature watering of production wells increases. The water cut of wells is also influenced by the development system and technological operating conditions of wells. The change in water cut in more than 100 production wells was monitored after the start of water injection into injection wells. The following data were recorded: the permeability coefficient of rocks in the area of the production well, the distance between production and injection wells, pressure at the bottom of production and injection wells, the dynamic viscosity of reservoir oil and the dynamic viscosity of injected water. The duration of water movement from the injection well to the production well decreases significantly with increasing permeability. The permeability of rocks is the main factor influencing the time of watering. With a pressure difference at the bottom of injection and production wells of 8 MPa and a dynamic oil viscosity of 30 mPas, the period of water movement between wells over a distance of 400 m is less than five years with a mobility of more than 7 μm2/Pas. A model for operational prediction of watering time was obtained. The model allows you to plan measures to isolate water-bearing layers.
The research was supported by a grant from the Russian Science Foundation (project no. 19-79-10034). https://rscf.ru/project/19-79-10034/

Speaker: Vladimir Poplygin (Perm National Research Polytechnic University)

Presentation.pdf

15:15 A tensorial representation of the hydraulic aperture of rough fractures under compressive and shearing stresses

The interplay between fracture roughness, topology, and permeability is of major interest in hydrogeology, and models that account for the roughness and tortuosity of fractures to upscale hydraulic apertures that represent the microscale aperture distribution have been the focus of many studies in the past decades (He et al., 2021). However, these models often overlook the tensorial aspects of hydraulic aperture, focusing instead on scalar aperture models (Smith & Freeze, 1979; Neuzil & Tracy, 1981; Schrauf & Evans, 1986; Nick & Bisdom, 2018), which do not fully capture the anisotropy that may be observed in the fluid flow in fractures (Nick & Bisdom, 2018). To address this gap, our study introduces a method for upscaling microscale aperture distributions into equivalent hydraulic aperture tensors.

Constraints in experimental designs limit hydraulic aperture measurements in fractured media to a single direction (Xing et al., 2021; Phillips et al., 2021), preventing the direct verification of hydraulic aperture tensors in the lab. To overcome this challenge, we test our method through numerical experiments. Our approach involves creating synthetic fracture walls using fractional Brownian motion (Mandelbrot & Van Ness, 1968) with varying joint roughness coefficients (Barton et al., 1985). We then use fluid flow simulations to explore the effects impacts of compressive and shear stresses, translated into contact area and shear displacement, on the hydraulic aperture tensors.

Our findings indicate that highly anisotropic fluid flow patterns might emerge due to changes in the contact area between fracture walls, which scalar aperture models cannot capture. In addition, no clear correlation between the JRC values and the anisotropy change with contact area was observed, meaning that more information is necessary for characterizing the flow properties of rough fractures. The flow model used in this research has been previously verified through laboratory tests (Konzuk & Kueper, 2004) and numerical experiments (Rybak & Metzger, 2020), and the upscaling methodology has been validated using analytical solutions (Ferreira et al., 2022). This supports the reliability of the present study, thus suggesting the necessity of a tensorial representation for hydraulic apertures. This work provides a basis for developing a rigorous upscaling methodology utilizing a tensorial representation for the hydraulic aperture.

Speaker: Dr Hamid M. Nick (Danish Offshore Technology Centre)

14:00 → 15:30 MS06-A: 2.3

14:00 Pattern transition during immiscible displacement of non-Newtonian fluids in a rough fracture

Two-phase flow in fractured media involving non-Newtonian fluids is of vital importance in many subsurface engineering applications. However, the impact of non-Newtonian rheology on the displacement dynamics remains unclear. In this work, we perform primary drainage experiments in which a Xanthan gum solution displaces a silicone oil in a transparent rough fracture for a wide range of shear-thinning property (controlled by polymer concentration) and flow rates. Based on qualitative and quantitative analyses of the observed fluid morphologies, we present an experimental phase diagram of the obtained displacement patterns. We present an experimental phase diagram of the obtained displacement patterns. We characterize a novel displacement pattern where the fluid-fluid interface changes from stable (plug flow) to unstable (fingering). We further propose a theoretical model elucidating the mechanisms behind the flow regime transitions. The interface stability criterion predicted by this model is in good agreement with the experimental measurements, and stresses the important role of fluid rheology, coupled to aperture variability, in immiscible displacements in rough fractures.

Speaker: Zhibing Yang (Wuhan University)

14:15 Experimental study on hysteresis during cyclic injection in hierarchical porous media

Hydrogen ($\mathrm{H_2}$) energy is being developed as a promising alternative to fossil fuels in response to growing energy demand and the urgent need to mitigate climate change. However, the significant obstacle to its wide application is the storage problem. Underground hydrogen storage (UHS) in depleted hydrocarbon fields and aquifers underground holds great promise. UHS includes temporary storage and later-on extraction (use) processes, corresponding to alternating displacement of hydrogen injection (drainage) and withdrawal (waterflooding). In UHS, a certain quantity of $\mathrm{H_2}$ may be inevitably lost due to residual trapping. Throughout the cyclic injection process, the trapped $\mathrm{H_2}$ might reconnect owing to hysteresis of saturation (Wang, Pereira, Sauret, & Gan, 2023) and relative permeability (Lysyy, Føyen, Johannesen, Fernø, & Ersland, 2022). Therefore, hysteresis effect during gas-liquid cyclic injection in porous media play an important role in application of UHS. Most current research efforts have primarily concentrated on cyclic injection in uniform porous media. However, in natural subsurface rock formations, porous structures typically exhibit multiple levels of pore sizes. There is an absence of experimental studies on the pore-scale mechanism by which geometry affects saturation hysteresis in the existing literature. In this work, based on 3D printing technology, we designed and fabricated the hierarchically structured porous media chip with dual permeability. Gas-liquid cyclic injection in uniform and hierarchical chips was studied by a high-speed imaging system emphasizing the impact of hierarchical structure on invasion behavior. The fingering morphology illustrates preferential invasion in $\mathrm{1^st}$-order structure and significant capillary trapping in $\mathrm{2^nd}$-order structure, which are reconfirmed by phase saturation at each level of the hierarchical structure. The hysteresis effect was quantified based on Land model, and the result shows weaker saturation hysteresis effect during cyclic injection in hierarchical structure compared with uniform structure. To explore the causes, ganglion mobilization was investigated. Unlike uniform structures, inhibition of ganglion mobilization was observed in the hierarchical structure. Through the analysis of local invasion behavior, the connect-jump invasion method is identified as the primary reason for this suppression. Further, the mechanism behind the hysteresis difference was uncovered from two aspects: topology connectivity assessed by measuring normalized Euler number and relative permeability estimated by employing Lattice Boltzmann method (LBM). The results show the hierarchical structure has higher connectivity and relative permeability, which helps explain its limited hysteresis effect. The findings in this study enhance the understanding of the hysteresis effect when optimizing strategies for storage and extraction in Underground Hydrogen Storage (UHS).

Speaker: Dr Shuo Yang (Lund University)

14:30 Impact of wetting films on stability diagrams of two-phase flow in porous media

The stability of two-phase flow in porous media is known to depend on the viscosity ratio and on the capillary number. The transition from a stable regime, to viscous or capillary fingering is not always clear. In this work, we investigate the role of wetting films on the stability of two-phase flow during a drainage. Such films are ubiquitous in porous media and appear when the solid is strongly wetted by one of the fluid. We develop a new dynamic pore-doublet approach combined with microfluidic experiments to highlight the role of the wetting films on the stability diagrams. We demonstrate that the layers of wetting fluid along the solid walls significantly alter the stability of the invasion.

Speaker: Cyprien Soulaine (CNRS - University of Orleans)

14:45 A generic model for capillary imbibition in a liquid-liquid system: Non-Newtonian fluid as the wetting phase

Capillary imbibition is a widespread phenomenon in both natural and industrial fields. While most studies focused on the imbibition between two Newtonian fluids or the fluid pair composed of a non-Newtonian liquid and air, the imbibition of a liquid-liquid system, where the wetting phase is a non-Newtonian fluid, remains relatively unexplored. Understanding the dynamics of flow for such fluid system is essential in petroleum engineering and the remediation of contaminated aquifers, as the flushing agent is often characterized as non-Newtonian. In this work, we proposed a generic mathematical model to describe the capillary imbibition of a system in which the non-Newtonian fluid acts as the wetting phase. Specifically, we derived the viscous force exerted on the non-Newtonian fluid based on the wall shear rate of Newtonian fluid. The resulting governing equation is applicable to various rheological models of non-Newtonian fluids. The Carruea-Yasuda model is adopted in this work, as it is able to describe the apparent viscosity over a wide range of shear rates. To verify the developed model, we conducted the capillary rise experiment in straight circular tubes, and compared the numerical solutions against physical observations. Two fluid pairs were examined: (1) liquid-air, and (2) liquid-liquid. In both cases, the wetting phase is non-Newtonian. Results show that the good agreement is obtained between the predictions from the developed model and experimental data across all investigated cases. In contrast, the traditional model falls short of capturing equilibrium rise height in the liquid-liquid case. We found that for a liquid-liquid system, incorporating appropriate viscous force into the governing equation is crucial for accurately describing the dynamics of capillary imbibition.

Speaker: Pengyu Fu (China University of Geosciences (Wuhan))

15:00 A comprehensive analysis on the wettability in shale oil rocks

Abstract: Fracturing-Soaking-Producing (FSP) is considered one of the effective methods in the development of shale oil. Improving the imbibition efficiency during the FSP process cannot be achieved without accurate understanding of reservoir wettability. Here, we used contact angle wettability method, spontaneous imbibition wettability method with nuclear magnetic resonance, centrifugation wettability method, and freeze-emission electron microscopy method to evaluate the wettability of core samples withdrew from Ordos Basin. At the same time, we developed a characterization method for pore-scale wettability based on the capillary bundle model then quantified the pore-scale wettability characteristics. The freeze-emission electron microscopy experimental results behaved that the oil is mainly adsorbed on the pore surface, while the water is present as a free fluid in the pores. The capillary pressure curves during waterflooding agree with the ones during gasflooding, and the wettability index is between 0.55 and 0.65, indicating that our core samples exhibit oil-wet. Furthermore, the pore-scale wettability illustrated that the average proportion of oil wet pores is about 60%, and the average proportion of water wet pores is about 40%. The oil-wet pores are mainly distributed in mesopores, and the micropores and macropores account for a relatively small proportion. The water-wet pores are mainly distributed in macropores and micropores, and the mesopores account for a relatively low proportion. Our research work enriches the understanding of the wettability of shale oil and has certain significance for optimizing the parameters such as the amount of liquid entering the shale oil reservoir.
Keywords: shale oil; wettability; pore structure; pore scale

Speaker: Prof. Xiao Wenlian (National Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University)

MS06-A-Wenlian Xiao.pptx

15:15 Direct imaging of surfactant/polymer floods in sandstone cores utilising a combined PET/ X-ray CT approach

With the ongoing transition towards net-zero, focus has been gradually shifting away from exploration and into the maximisation of production from already existing reservoirs. Here, traditional oil recovery methods typically extract around 30% of the oil in place – giving large opportunity for more efficient recovery techniques. Among which, surfactant/polymer methods have the capability of increasing recovery up to 70% by both liberating trapped oil and improving the displacement efficiency. However, the relatively high cost of the surfactant is a major concern and, as such, ensuring its efficient and maximum utilisation is pivotal to a successful operation. To this end, methods are needed to understand the mixing process within the surfactant/polymer slug. Traditional approaches use a surfactant effluent breakthrough curve, but the results are associated with significant uncertainty due to the complexity of the flow dynamics present within a surfactant/polymer flood, with the formation of an oil bank and sharp saturation fronts. As such, extrapolation to in-situ behaviour remains a major challenge.

In this work we present results from a coupled experiment employing both PET and X-ray CT as imaging techniques aimed at the direct visualisation of both saturation profiles (by X-ray CT) and tracer propagation within a surfactant/polymer flood (by PET). The overall experiment consisted of two identical surfactant/polymer corefloods – conducted on Bentheimer – with the individual imaging techniques applied independently. Both experiments employed surfactant/polymer flooding as a tertiary recovery method – following a waterflood. The flooding scheme consisted of a 0.7 PV surfactant/polymer slug (L-145-10s 90/HPAM) followed by a 0.5 PV polymer slug (HPAM) to displace the residually trapped oleic phase (decane). For the PET experiment, two radiotracer pulses (FDG) were injected at the front and rear of the surfactant/polymer slug to investigate the mixing dynamics within the slug.

Via the use of X-ray CT, and the visualisation of the saturation profiles, the chosen combination of flooding regime and fluids was shown to both increase recovery, up to 86%, and form an oil bank – characteristic of a surfactant-based displacement process. Via the use of PET, the concentration profiles of the injected tracer pulses were reconstructed in up to three-dimensions as they progressed through the core. Mixing indices, such as the dilution index, spreading length and segregation index, were computed and compared to available single phase tracer experiments conducted on Bentheimer and other rock samples of varying heterogeneity. Notably, the calculated indices indicate comparatively enhanced mixing for Bentheimer – with behaviour mimicking that of more heterogenous systems. Lastly, via the combination the two imaging techniques, qualitative observations regarding the influence of the saturation fronts on the shape of the tracer concentration profiles was made. Overall, through this work, we demonstrate the feasibility of utilising PET in more complex flooding environments to investigate mixing, but also highlight the complementary nature of X-ray CT and PET as imaging methods.

Speaker: Andrea Rovelli (Imperial College London)

14:00 → 15:30 MS09: 2.3

14:00 The pinning dynamics of a non-wetting droplet penetrating a permeable substrate

Problem statement
The droplet penetration plays an essential role in various fields such as inkjet printing, fuel cells, oil and gas development, new material preparation, and enhanced heat transfer. The functions of non-wetting droplets are used to be limited due to the capillary resistance to its penetration into micropores, but the application of magnetic, electric, acoustic and optical forces, has overcome the limitation. However, the dynamics of the penetration and contact line pinning of non-wetting droplets remain unclear.
Methods
The contact line pinning mechanisms of a non-wetting droplet penetrating a permeable substrate are theoretically explained by considering the force balance of volumetric force, capillary force, and pinning and depinning forces. We propose two dimensionless numbers, Bo∗ - the ratio of the volumetric force to the capillary force, and Ct - the ratio of the depinning force to the pinning force, to establish a phase diagram that quickly determines the droplet penetration patterns. We further perform a series of lattice Boltzmann (LB) simulations, and the results match well with our theoretical analysis.
Results
The time evolutions of the contact area diameter Dc, the droplet height h, the penetrated droplet volume percentage Sp, and the apparent contact angle θ are derived as illustrated in Figure 1, in which the contact angle dynamics during contact line pinning and shrinking are further clarified. For Bo∗ ⩽ 1, the droplet will not penetrate the substrate; for Bo∗ > 1 and Ct ⩽ 1, the droplet will penetrate with a pinned contact line; for Bo∗ > 1 and Ct > 1, the droplet will penetrate with contact line shrinking. The phase diagram that quickly determines the droplet penetration patterns is exhibited in Figure 2.
Discussions and Conclusions
The penetration dynamics of a non-wetting droplet into a permeable substrate are studied both theoretically and numerically, with a special focus on the contact line pinning mechanisms. The lattice Boltzmann simulations are performed and show excellent agreements with our theoretical derivations and intuitively illustrate the dynamic penetration processes.
We propose two dimensionless numbers: a modified Bond number Bo∗ and a new dimensionless number Ct. These two numbers are applied to establish a phase diagram using that determines the penetration patterns and pinning conditions of the droplet: if Bo∗⩽1, the droplet will not penetrate the substrate; if Bo∗>1 and Ct⩽1, the droplet will penetrate with a pinned contact line; if Bo∗>1 and Ct>1, the droplet will penetrate with contact line shrinking. For the droplet penetration mode with contact line shrinking, we also find the contact angle change can be divided into three patterns: the constant contact angle, the contact angle rebound, and the contact angle decrease.
This work successfully explains the pinning mechanisms of the penetrating non-wetting droplet found in experiments, moreover, the phase diagram offers a quick evaluation of the droplet penetration patterns, and provides new guidelines to achieve better performance for many applications.

Speaker: Chiyu Xie

14:15 A thermodynamically consistent and conservative diffuse-interface model for two-phase flows in complex geometries

In this work, a thermodynamically consistent and conservative diffuse-interface model for gas-liquid-solid multiphase flows is proposed. In this model, a novel free energy for the gas-liquid-solid multiphase flows is established according to a ternary phase-field model, and it not only contains the standard bulk and interface free energies for two-phase flows, but also includes some additional terms to reflect the penalty in the solid phase and the wettability on the solid surface. Furthermore, a smooth indicator function of the solid phase is also introduced in the consistent Navier-Stokes equations to achieve a high viscosity in the solid phase and preserve the velocity boundary conditions on the solid surface. Based on the proposed diffuse-interface model, the fluid interface dynamics, the fluid-structure interaction, and the wetting property of the solid surface can be described simply and efficiently. Additionally, the total energy is also proved to be dissipative for the two-phase flows in the stationary geometries. To test the present diffuse-interface model, we develop a consistent and conservative lattice Boltzmann method and conduct some simulations. The numerical results also confirm the energy dissipation and good capability of the proposed diffuse-interface model in the study of two-phase flows in complex geometries.

Speaker: Chengjie Zhan (Huazhong University of Science and Technology)

14:30 Combined effect of pore geometry and wettability characteristics on entry capillary pressure

Immiscible two-phase flow in porous media is a universal phenomenon in various natural and industrial processes. Its invasion pattern is determined by the interplay between viscous and capillary forces, neglecting the influence of buoyancy at a small scale. In numerous scenarios in porous media, the capillary forces in drainage process are dominant, which emphasize the importance of precisely computing entry capillary pressure. Existing equations for the calculation of entry capillary pressure, based on the Young-Laplace equation and MS-P method, rely exclusively on cross-sectional geometrical details, and utilize wettability values obtained from flat surfaces to intricate three-dimensional pore structures. However, the effects of three-dimensional pore structures on the curvature of fluid-fluid interface along the flow direction are neglected in these equations.
This work underscores the significance of three-dimensional pore geometry in influencing interface movement and entry capillary pressure, particularly in situations involving intermediate wettability that can introduce complexity to interface behavior. The dynamic evolution of capillary pressure and fluid-fluid interface morphology during two-phase drainage capillary-dominated displacement in both regular capillary tubes and irregular pores extracted from X-ray microtomography images of real porous media were investigated using the volume-of-fluid (VOF) method. The results indicated that the capillary pressure experiences a temporary decrease, or even becomes negative under intermediate wettability when the interface enters the converging segment as the specified contact angles in a three-dimensional space force the interface to decrease its curvature or even inverse the curvature. This phenomenon is the result of the complex interaction of the solid wall in flow direction, cross sectional geometry normal to the flow and the contact angle. This interesting finding challenges conventional expectations and emphasizes the importance of considering dynamic conditions and wettability effects. The statistical analysis of the interface curvature at the point of maximum capillary pressure revealed the effect of three-dimensional structure on local interface curvature under different wettability conditions. Additionally, the numerical results show that the corner flow becomes unstable under intermediate wettability which leads to less remaining saturation. This study raises doubt on the reliability of existing analytical methods for predicting entry capillary pressure as they overlook the geometrical details along flow direction and lack geometric validity across all range of contact angles. Considering the importance of entry capillary pressure in drainage invasion pattern, it is important to develop models that can improve prediction of entry capillary pressure.

Speaker: Tongke Zhou (Department of chemical engineering, University of Manchester)

14:45 Lattice Boltzmann modeling of pore-scale fluid flow during wettability alteration-based enhanced oil recovery in marine porous carbonate reservoirs

The Middle East has become the largest overseas oil production base of China, where marine porous carbonate reservoirs are widely-distributed. Large recoverable reserves are still unexploited, implying a great potential to obtain higher oil production. Influenced by pore type, multi-modal pore structure, initially oil-wet or mixed-wet condition, the microscopic displacement efficiency is relatively low, only 40%~60%. Using ion-matched surfactant flooding to carry out wettability control from initially oil-wet or mixed-wet to water-wet, oil recovery ratio of marine carbonate reservoirs can be remarkably increased. Ion-matched surfactant flooding has been regarded as an attractive technique to greatly improve oil recovery after waterflooding in marine carbonate reservoirs. However, pore-scale mathematical models of wettability control by ion-matched surfactant flooding have not been reported in the literature. It is unclear about the pore-scale fluid flow mechanism during wettability control.
To tackle these issues, core samples from a typical carbonate reservoir in the Middle East were selected. Multi-modal pore structure image data were acquired by micro-focus X-ray CT scans. The study employed the U-Net fully convolutional neural network deep learning semantic segmentation algorithm. With a limited amount of image data, it accurately identified and constructed a digitized core model of the multi-modal pore structure. A pore-scale fluid flow mathematical model for LSW-S system infiltration control and lattice Boltzmann simulation method were then established by describing major physical-chemical processes such as oil/water two-phase flow, wettability alteration, solute convection-diffusion, surfactant adsorption/desorption and reducing oil/water interfacial tension. By comparing with classical equation analytical solutions, the accuracy of the simulation results was verified. The study investigated the impact of factors on pore-scale fluid flow characteristics of enhanced oil recovery through infiltration control, including displacement system, ion-concentration, capillary number, and wettability .
The research results indicated that due to local adsorption-desorption imbalance, both LSW drive and LSW-S drive caused dynamic changes in rock wettability, effectively detaching oil film but without altering the flow path of the displacing medium. In porous carbonate rocks, the sequence of pore-scale oil displacement efficiency was: LSW-S > LSW > HSW. A lower concentration of ion-matched water facilitated the detachment of oil films and droplets from small pores. A lower concentration of ion-matched water was more conducive to detaching oil films and droplets from small pores. Ion concentration mainly affected the relative permeability of the oil phase and had a minor impact on the relative permeability of the water phase. The capillary number had a significant impact on oil displacement efficiency and fluid microscopic distribution. As the capillary number increased, the force of fluid driving increased, leading to a significant increase in both oil and water relative permeabilities. With rock wettability transitioning from oil-wet to neutral wetting, the oil phase's relative permeability increased, while the water phase's relative permeability decreased. Under neutral wetting conditions, ion-matched water exhibited pronounced effects on infiltration control, substantially increasing the relative permeability of the oil phase and mobilizing microscopic residual oil.

Speaker: Mr Daigang Wang

15:00 Effect of roughness in the fluid flow in porous media: based on random fields theory and 3D printing technology

The morphology of pores is an important factor influencing the permeability of porous materials[1,2,3]. In recent decades, the influence of the morphology of pores on fluid flow in geomaterials has attracted extensive attention in the engineering fields of petrochemistry, hydrogeology, civil and geotechnical structures, with applications in radioactive hazardous waste storage[4], oil and gas storage[5,6,7], carbon dioxide sequestration[8], and geothermal energy extraction[9].

To model porous media whose morphology is precisely controlled, excursion sets of random fields have been used recently[10]. The models generated by this method have the advantages of isotropy, ergodicity, generalizability, stability, and controllability. In previous studies, researchers have focused on generating correlated random fields using the Gaussian covariance function. However, the actual pores are not smooth.

To explore the effect of roughness on fluid flow within porous media, in our research, the Matérn covariance function has been chosen to describe the random field. The Matérn covariance function allows controlling the level of smoothness, which can be adjusted by a parameter ν greater than 0[11]. Using this function, a three-dimensional continuous field can be generated. Afterwards, to transform this continuous field into a binary field with only matrix and pores, the excursion set method is used. This method transforms the continuous field into a binary field with varying volume fractions by selecting different threshold values. Therefore, by controlling the threshold value, the porosity of the generated porous medium can be precisely controlled.

By the above methods, models of porous media whose roughness is precisely controlled are generated. In order to relate the parameter ν to common roughness parameters, we analyze the fractal dimension and the specific surface area of the generated field and compare the relationship between them. Afterwards, to analyze the effect of roughness on fluid flow, experimental and numerical investigations have been performed.

In terms of testing, a number of samples with different roughnesses were generated using SLA 3D printing, which printing accuracy can reach 50 microns. To verify the accuracy and the quality of the 3D printed samples, the samples were characterized by micro-CT technique. By comparing the scanned images with the numerical model, the parameters such as porosity, pore connectivity, fractal dimension, tortuosity, and specific surface area were analyzed. Subsequently, the permeability of each sample was measured through Darcy tests, and the correlation between permeability and roughness was analyzed.

In order to compare with the experimental data, numerical simulations were performed using the lattice Boltzmann method[12], using the Palabos library[13]. This method has advantages in dealing with complex boundaries and parallel operations, which is very suitable for porous media models. Considering factors such as stability and applicability, the D3Q19 lattice model was selected. The numerical model of all the samples used in the test was considered, the fluid flow in the porous medium was simulated under the same conditions in the test, and the flow rate and permeability were calculated.

Finally, the results of the test and simulation were compared and analyzed, and a law describing the evolution of permeability with roughness was proposed.

Speaker: Yunlong Wu

15:15 Theory of nonwetting fluid snap-off in porous media under vibration

Snap-off represents a fundamental occurrence within the complex dynamics of multiphase flow in porous materials. Understanding the quantitative aspects of phenomena triggered by seismic activity within these media is vital for engineering applications and predicting natural events, particularly concerning snap-off investigations. Exploring the influence of vibrations on snap-off through numerical simulations demands substantial computational resources. Consequently, there is an urgent necessity for a theoretical model to deeply comprehend snap-off under vibrational influence. We developed a theoretical model based on volume conservation principles, elucidating the dynamic instability at the wetting/non-wetting interface in sinusoidally constricted capillary tubes experiencing vibrations. Our analysis focused on correlating vibration amplitude and frequency with non-wetting phase snap-off occurrences. Furthermore, we examined how vibrations affected non-wetting droplets, verifying adherence to static snap-off criteria. Investigating various capillaries with differing pore throat/pore size ratios allowed us to gauge the impact of vibration on snap-off. This research significantly advances our comprehension of snap-off phenomena in multiphase porous media subjected to seismic conditions, bridging a crucial gap in vibration-influenced porous media studies.

Speaker: Mr Jiajing Li (Southeast University)

14:00 → 15:30 MS13: 2.3

14:00 Multicomponent alkanes transport through nanoporous shale matrix

Shale is attracting more and more attention owing to the huge hydrocarbon resources. However, the large number of nanopores and the multiscale pore structure pose great challenges in accurately characterizing the transport behavior of crude oil within the shale matrix. Although most studies suggested that the classical Darcy’s law breakdown in the shale matrix, there is a great controversy on the oil transport mechanism: slip flow or the existence of stick layers, which impedes the efficient exploitation of shale oil. To address this issue, we study the transport of multicomponent alkanes through a nanoporous shale matrix by integrating molecular dynamics and digital rock. We consider the multi-component characteristics of shale oil and the typical mineral composition of shale reservoirs. Firstly, we use molecular dynamics to accurately capture the pressure-driven flow behavior of multi-component alkanes within kerogen cylindrical pores and calcite nanoslits, from which a mathematical model is developed to characterize the transport behavior. Then, based on Focused Ion Beam Scanning Electron Microscopy (FIB-SEM) images, we build an ultrahigh-resolution digital rock model using deep learning. A pore network model is extracted from this digital rock and used for the flow simulation of crude oil through the shale matrix. For the molecular studies within a single nanopore, we reach the following conclusions: sticky layers, whose velocity approximates zero, exist during oil flow through kerogen and calcite nanopores. Oil adheres onto the shale surfaces for the smaller driving force, resulting in a sticky layer that impedes flow. As the driving force increases, certain alkane molecules surpass the affinities from the rock surface and facilitate the flow, leading to a thinner sticky layer. The heavier components in shale oil show stronger interactions with rock surfaces, making them highly susceptible to adsorption and the sticky layer. Moreover, the thickness of the sticky layer in kerogen pores is greater than that of calcite nanopores, which can be attributed to the atomic roughness and fluid-solid interactions. Based on these findings, we have developed a mathematical model that describes the variations in the sticky layer thickness within different pores with respect to parameters such as driving force, alkane components, and pore size. Even with the assistance of FIB-SEM, the observation of shale nanopores smaller than 10 nm is challenging, which leads to the unreliable assessment of shale pore network connectivity. We develop a stepwise 3D super-resolution reconstruction method for shale digital rocks based on deep learning, which significantly improves the accuracy of digital rock core and enables successful observations of pores smaller than 10 nm. We then use the pore network model to simulate shale oil flow at the pore scale. Our findings showed that the transport of oil through the shale matrix is nonlinear and has a threshold pressure gradient due to nanoscale sticky layers. When the displacement pressure gradient exceeds the threshold pressure gradient, oil starts to flow and lighter components dominate shale oil transport. This study sheds light on the accurate modeling of shale oil production and more generally, for mass transport in nanoporous materials.

Speaker: Sen Wang (China University of Petroleum (East China))

14:15 A Modified Simplified Local-Density Model for Gas Adsorption Considering Cylindrical Pore Structures

Recent developments in unconventional oil and gas reservoirs such as shale gas have brought the pore structures and gas adsorption characteristics into focus. Traditional models, such as the original Simplified Local-Density (SLD) model with a slit-shaped pore, fall short in accurately describing gas adsorption in these reservoirs due to the presence of various carbon pore geometries, including slit and cylindrical shapes. In this study, we develop a modified SLD model, specifically adapted for circular shale nanopore geometries. Such model, based on cylindrical pore structures, incorporates a modified attractive parameter to account for the curvature effect on gas adsorption behavior. We validate the model's efficacy by examining the isobars and isotherms of methane over a wide range of temperature and pressure in various cylindrical pores.

The results demonstrate that the adsorption isotherm and density profile calculated by the modified SLD model are in strong agreement with experimental data. Furthermore, such modified model effectively captures the methane adsorption isotherm observed in shale, demonstrating its superior capability in characterizing pore structures within unconventional gas reservoirs.

Speaker: Dr Jialin Shi (University of Alberta)

14:30 Multicompotent image-based modeling of water flow in mixed wet shale nanopores

Shale contains abundant multi-component nanopore spaces with different wettability. Water flow in multi-component nanoporous systems is still unclear due to the effects of complex pore throat topology and heterogeneous wettability, which limits knowledge of hydraulic fracturing for enhanced hydrocarbon recovery. This work reconstructs single-component (i.e. clay, organic, inorganic matter) and multi-component coupled nanoporous media utilizing image fusion technique. A numerical model for water flow in complex nanoporous systems is developed considering the heterogeneous wettability, slip effect, and effective viscosity. The water flow mechanisms in single and multi-component heterogeneous wetting systems are systematically analyzed. Results show that the enhancement factor increases exponentially, and the tortuosity increases with increasing contact angle. The flow is weakened under strongly hydrophilic conditions, and the enhancement factor is linearly negatively correlated with specific surface area. Under hydrophobic conditions, a small throat aspect ratio corresponds to a large enhancement factor, and quasi-circular pores limit the enhancement. Due to the differences in pore throat size and wettability, water flow is weakened in clay pores and enhanced in organic pores. For the multi-component heterogeneous wetting system, the global flow is enhanced compared to no slip and uniform wetting systems; the velocity is enhanced non-uniformly due to the altered pathways in organic pores; the flow is slightly weakened in the clay pores. This work provides a numerical perspective for water flow in shale multi-component nanoporous systems.

Speaker: Xiangjie Qin (China University of Petroleum)

14:45 Multiscale modeling of ion transport in water saturated nanostructures of clays

Ion diffusion within clays is a fundamental process related to contaminant transport in groundwater and radionuclide migration in the context of nuclear waste disposal. Montmorillonite, one of the predominant minerals within bentonitic clays, exhibits distinguished physicochemical properties such as the ability to absorb water and ions, accompanied by underlying swelling. This behavior is primarily governed by the electrical double layer (EDL) effect at the nanoscale. In turn, these nanoscale interactions have a critical influence on the macroscopic transport properties in clays. In this study, a multiscale modeling technique was developed to combine molecular-scale and pore-scale modeling. At the molecular scale, a coarse-grained (CG) mesoscale model was used to generate the nanostructures of sodium montmorillonite, where ClayFF force-field atomistic montmorillonite platelets are equivalently represented by coarse-grained platelets including two types of particles: central nonhydrogen-bonded particles and edge hydrogen-bonding particles (1). At the pore scale, the lattice Boltzmann method (2) is used to solve the coupled Poisson-Nernst-Planck equations on GPUs to model the transport of ions in the nanostructures obtained by the CG mesoscale model. Since the variable charge of the edges of the montmorillonite platelets depends on the pH, an inhomogeneous surface charge density is employed as a boundary condition to obtain the electric potential distribution. Quantitative analyses carried out by this multiscale model were implemented to investigate the influence of clay density, ionic strength, and pH on the effective diffusivities of ions. The insights into the ion transport process and the effect of edge sites in clays gained in this study can be implemented in larger-scale analyses such as continuum-scale reactive transport simulations for radionuclide migration in deep geological repositories for radioactive wastes.

Speaker: Dr Yuankai Yang (Forschungszentrum Jülich)

15:00 A Multi-Scale Approach for Assessing Shale Oil Accessibility: Digital Core, Molecular Simulation and Machine Learning Analysis

This study presents a novel multi-scale approach for assessing the accessibility of shale oil in cores. By using FIB-SEM equipment to build digital core, watershed and maximum ball method to extract pore size and shape factor. Then molecular simulation is used to study the availability of shale oil in individual pores with different shapes and radii. Finally, combining the results of the above two scales, machine learning is used to predict shale oil availability across the entire core. On the core scale, the watershed and maximum ball method is used to extract the core pore network model, and it is found that square pores occupy the highest proportion among the three pore types, and most of the radii are distributed in the range of 2-3 nm. The molecular scale dynamic simulation results show that the adsorption forms of shale oil are different in different pores, and the adsorption of shale oil in circular pores is less than that in flat pores. The proportion of shale oil adsorption in square pores is the highest, followed by triangle pores, and the proportion of shale oil adsorption in circular pores is the lowest. The Random Forest machine learning algorithm is used to predict the availability of shale oil with different pore shapes and obtain the shale oil availability ratio of the whole core. The results show that the pores with a more obvious angular structure show a lower shale oil availability ratio. In general, the impact of pore shapes on shale oil availability is not significant, and the difference between different pore shapes is only 10%. The multi-scale evaluation method for shale oil availability proposed in this study is helpful to better understand the availability of shale oil in reservoirs and to optimize recovery strategies.

Speaker: Mr Yifan Yin (China University of Petroleum (East China))

15:15 Water effect on oil adsorption and configuration in nano mineral pore

Sedimentary rock is wet in situ and generally occurs at depths in the subsurface where pores are saturated with water and hydrocarbons. The competitive adsorption of water and oil in nanopores of shales is believed to influence the dynamic configurations of fluids, and therefore their wetting and displacement behaviors and ultimately oil production. But its nature is poorly understood due to nano-confinement induced challenges in performing both physical and numerical experiments. In this study, the effects of water as a competitive adsorbate on the adsorption of n-heneicosane in Na-montmorillonite (MMT) and illite slit nanopores, with a 5-nm aperture, are systematically investigated and elucidated using molecular dynamics (MD) simulations, under realistic conditions. For each pore, water and oil molecules at selective concentrations (100%, 0), (25%, 75%), (50%, 50%), (75%, 25%) and (0%, 100%) are packed randomly into the pore at the same time and then are geometrically optimized before a stable configuration in NPT ensemble is obtained to perform MD simulation runs for estimating the density distributions for both phases.
The results show that the water molecules are the preferred adsorbate to both minerals and form an apparent wetting layer when both water and oil molecules enter the pore at the same time. These appear relatively more distinctive for the MMT than illite pores, in particular, at low water concentrations. When the oil molecules enter a pore earlier than the water molecules, or vice versa, the early-entering molecules are found to impede the late-entering ones from being absorbed onto the pore wall of MMT. The molecules, which are adsorbed to the pore wall, seem to adsorb the molecules of the other phase in the pores, to yield a smooth transition zone between adsorbed and free phases. The water molecules are found to disperse into the oil molecules, and when the water concentration is high enough, the former form bridges from one wall to another, and a film on the mineral surface. At 75% oil concentration, the oil molecules are found to be adsorbed on the wall of both MMT and illite pores but not appears as a flat film. This study offers new insight into the nature of the competitive adsorption and discusses its impact on phase configurations in pores and wetting behaviors.

Speaker: Dr Hang Jiang (Oil and gas resource Strategy Research Center, Ministry of Natural Resources)

14:00 → 15:30 MS20: 2.3

14:00 Preliminary results for a novel in vitro MRI-based approach to quantify blood clot permeability

Blood clots are a complex heterogeneous porous matrix primarily composed of platelets, red blood cells, and fibrin. This matrix composed of micron and sub-micron scale components results in pores on the order of microns, which causes high flow resistance through the clot in occluded vessels [1]. Elevated flow resistance in these occluded vessels, as occurs in cases of stroke or heart attack, results in poor blood perfusion, reduces fibrinolytic protein transport to the clot, and limits the clot lysis rate during thrombolytic therapy. Quantifying blood clot permeability in both statically and dynamically formed clots, which may vary significantly [2], is critical to understanding thrombolytic efficacy and vessel reperfusion. Although previous studies have quantified permeability [2,3], a thorough understanding of blood movement through the porous clot structure remains elusive. This study aims to quantify blood clot permeability using two methods: an established method and a novel MRI-based method.

The first method followed the benchtop permeability experiments detailed by Wufsus et al. [3]. Briefly, a test chamber was occluded with clots of reconstituted platelet rich plasma formed over 24 hours. A saline solution reservoir was attached to the test chamber, and fluid was allowed to permeate through. Flow rate was calculated using a camera to track fluid velocity in tubing downstream of the clot. Permeability was calculated using the Darcy equation and the known fluid viscosity, flow rate, and pressure gradient across the clot. The second method used magnetic resonance imaging (MRI) to track fluid permeation (Fig. 1A). The occluded test chamber was attached to a saline solution reservoir with MRI contrast agent Gadavist® (Bayer HealthCare) at a 1000:1 dilution and placed inside a 14 Tesla MRI scanner (Bruker). Three-dimensional scans of the test chamber were taken using a FLASH pulse sequence with echo and repetition times of 3 and 30 ms, respectively, resulting in a 100 x 100 x 200 microns squared voxel resolution and 3.5 minute scan time. This scan time was sufficiently low to prevent significant signal loss due to fluid motion. Sequential scans were taken over the course of an hour. Avizo was used to generate volumetric reconstructions of the high-intensity fluid domain and calculate flow rate (Fig. 1B).

Results from both methods produced similar average permeability measurements. The average permeabilities from the camera tracking and MRI methods were 5.87E-2 microns squared and 3.86E-2 microns squared, respectively. Although average results were similar, variability between clots were relatively high. These permeability values were slightly higher in magnitude compared to previously reported results by Wufsus et al. for platelet rich plasma clots with low platelet volume fractions (1.2E-2 +/- 0.6E-2 microns squared) [3]. The MRI method had the added benefit of tracking the entire fluid volume through the clot to observe any significant permeation heterogeneities. The fluid moved uniformly through the clot across the entire cross-sectional area, which indicates in this fully occlusive state where fluid motion is primarily governed by Stokes flow, a homogeneous porous media modeling approach may still be appropriate in macroscopic-scale modeling.

Speaker: Keefe Manning (The Pennsylvania State University)

14:15 Investigating charged nanoparticles diffusion in brain tumour microstructures at pore-scale

Nanoparticles (NPs) have emerged as promising candidates for targeted drug delivery in the treatment of brain tumours due to their diverse physicochemical properties. With the advanced development of convection-enhanced delivery (CED), anticancer drugs are directly infused into the targeted brain tumour region through a catheter, enabling drugs to bypass the blood-brain barrier (BBB). Multiple factors, such as particle size and surface charge are crucial for enhancing the NP transport in brain tumours [1]. However, primarily owing to the complex microstructure and microenvironment of the brain tumours, how these physical properties affect the NPs diffusion in the brain tumour at pore-scale still needs to be clarified and quantified.
In this study, we first established a framework consisting of different geometrical models of brain tumour microstructures from Grades 1-4 [2] and the particle tracing model to investigate the relation between the effective NP diffusion coefficient in brain tumours and their physical properties. We verified the predictive power of the present model by comparing the results under the same conditions to experimental results reported in the literature [1]. Then, we quantitatively analysed the NP diffusion coefficient in order to establish the effect of particle size, surface charge, temperature and extracellular matrix. We found that the diffusion coefficients of NPs are positively related to all these physical properties when the total surface charge increases with the particle size [3]. Conversely, the diffusion coefficient of NPs negatively corresponds to the particle size when the total surface charge is kept the same. The magnitude of the diffusion coefficient with the zeta potential (Zp) of -5mV is at least 1500 times larger than that value of uncharged NPs. This difference is even more pronounced with larger NP sizes. More interestingly, we noted that the diffusion coefficient in the high-grade tumour microstructures is smaller than that in low-grade tumour microstructures when other parameters are kept the same, although the high-grade tumours possess a higher porosity than low-grade tumours. This may imply that higher level of hyaluronic acid (HA) of ECM deposited within the interstitial fluid is essential for the critically decreased diffusion coefficient in high-grade tumours.
Results from this study can deepen the understanding of the relationships between NP diffusion coefficient and physical characteristics of NPs in brain tumours, providing crucial insights and a reliable modelling framework for the development of nano-drugs and carrier delivery processes in chemotherapy of brain tumours and other brain disorders.

Speaker: Mr Yi Yang (University of Aberdeen)

14:30 Reconstruction of Multiscale Structures of Cerebral Vasculature

The cerebral vasculature plays a vital role in nutrients delivery and metabolic waste removal in the brain, yet in which transport mechanisms are not fully understood. Numerical simulation is an effective approach for analyzing transport in the cerebral vasculature, depending on accurate acquisition of the cerebrovascular structure. However, the complex cerebrovascular structure poses a serious challenge for reconstruction of the entire vasculature.
Traditional methods for the reconstruction of cerebral vasculature include medical imaging and computational generation. Medical imaging relies on the scanning technology (such as DSA [1] and MRA [2]). Despite its effectiveness in clinical research, it’s limited by their inability to capture small vessels in vivo due to resolution constraints. Alternatively, computational generation including simulated annealing algorithm [3], can overcome resolution limitations but often fall short in providing structures morphologically compatible with the real cerebrovascular structure.
In this study, we present a novel method for reconstructing the multiscale cerebral vascular system, which integrates anatomical findings with medical imaging. The proposed model merges macrovasculature derived from medical imaging which reflects real morphology, with microvasculature from random generation which could reach the resolution of capillary network. This integration allows a more accurate representation of the entire cerebral vasculature. Consequently, the flow simulations based on this model are in good agreement with medical experiments. This model provides an effective tool for simulating and understanding transport in the cerebral vasculature.

Speaker: Yuedi Wang

14:45 Cardiac Microvascular Obstruction: microvascular drug transport and lysis of microthrombi in a multi-scale model of the myocardial microcirculation

Cardiac microvascular obstruction (MVO) is an injury of the myocardial microcirculation. It typically follows successful recanalization of the blocked coronary artery (primary occlusion) in myocardial infarction. MVO leads to under-perfusion of the affected tissue and has a negative impact on patient outcomes. Next to other occluding factors, MVO may be caused by microthrombi (debris from the primary occlusion) embolizing vessels of less than 200µm diameter [1].
For the systematic study of MVO and to test diagnostic and therapeutic approaches, we have developed a multi-scale in vitro model for MVO [2]. It comprises a microfluidic chip modeling a branching microvascular tree with vessel diameters ranging from 700 to 50µm. The chip is integrated into a model of the coronary circulation which is coupled to a left-heart mock loop. This experimental setup provides physiological flow conditions for the whole model. MVO is induced by injecting porcine microthrombi (~200µm) into the microfluidic chip where they randomly distribute and embolize some of the microchannels [3].
Infusion experiments with dye indicated that some microthrombi lead to a full occlusion of the respective microchannel such that mass transport toward the occluding microthrombus is very inefficient, whereas other microthrombi have a semi-occlusive or porous character such that advective transport toward the microthrombus is possible. Furthermore, we found that periodic fluctuations of the vessel volume, due to the contraction of the myocardium with every heartbeat, enable mass transport also in occluded vessels (intramyocardial pumping effect, [4]), like squeezing and soaking a dishwashing sponge.
Results from the dye infusion experiments suggest that it is possible to transport thrombolytic drugs to the microthrombi such that they can resolve the occlusions and help to reestablish blood perfusion to the myocardium. To identify the appropriate drug infusion protocol and the optimal drug dosages, we developed a second microfluidic setup with a single straight microchannel and constant flow. It ensures that the microthrombi in the chip are non-occlusive such that the drug can always reach the microthrombi. We found that microthrombi can be lysed up to 75% over the course of 20 minutes of perfusion if the thrombi are first exposed to a high drug concentration (alteplase) for 90 seconds. These results will be applied to the experimental setup with the full microvascular tree and intramyocardial pumping effect.

Speaker: Dr Yannick Rösch (University of Bern)

15:00 Geometry of the porcine myocardial microcirculation with and without cardiac microvascular obstruction: preliminary results from an ex vivo study with propagation-based phase contrast tomographic microscopy

In cardiac microvascular obstruction (MVO), vessels of the myocardial microcirculation are fully or partially occluded such that the affected tissue is under-perfused. MVO may result from a catheter-based removal of a larger thrombus in a coronary artery after a heart attack. During the intervention, this thrombus may be broken up into small microthrombi, which are washed downstream with the re-established blood flow potentially occluding vessels of 200µm diameter or less.
Blood perfusion of the myocardium with MVO is governed by the geometry of the myocardial microcirculation. Both the distribution of vascular branchings at different vessel diameters and the network topology determine the location of the occluding microthrombi and their effect on blocking the perfusion downstream of the occlusion. For example, the presence of collateral vessels (vascular loops) at the level of arterioles may allow the blood to bypass a local obstruction, whereas an occlusive microthrombus in a tree-like topology will block blood flow in the whole downstream region. Unfortunately, there is only limited knowledge on the geometry of the myocardial microcirculation. Microfluidic models rely on older histological data [1,2]. Moreover, there is even less knowledge about the distribution of microthrombi in MVO and whether they are fully occlusive or only semi-occlusive.
Therefore, we performed an imaging study using propagation-based phase contrast tomographic microscopy at the TOMCAT beamline of the Swiss Light Source (PSI, Würenlingen, Switzerland) on seven samples of pig hearts with and without MVO. These samples were obtained from a large animal trial with a porcine MVO model using microthrombi that were created by dissecting autologous arterial thrombi into small fragments of 150-300µm [3].
The imaging data with an isotropic voxel size of 1.625µm is segmented using the nnUnet [4] algorithm, which was trained with manually labeled data. Preliminary results indicate a complex vascular network with larger arteriolar vessels on the outer side of the myocardial wall (epicardium) that are branching into ever smaller vessels toward the inner side (endocardium). Furthermore, we could identify local microthrombi in arterioles of 50µm diameter. It is the aim to use fully automated segmentation to improve existing microfluidic models of MVO [2] which can help to develop novel treatment strategies for MVO.

Speaker: Dominik Obrist (University of Bern)

15:15 Efficient mixed-dimensional models for root water uptake

Root water uptake efficiency and robustness to varying soil water distribution depend on the three-dimensional root system architecture.
Roots can also redistribute soil water through the root system. However, roots are numerous and thin which is why modeling root water uptake with three-dimensionally resolved roots is a numerical challenge. Moreover, soil hydraulic conductivity nonlinearly decreases with soil water content resulting in a large conductivity drop in the vicinity of roots which may require local grid refinement around roots to resolve pressure gradients in dry soils.

We first present several approaches to overcome these challenges. We show that a rather coarse-grained approximation of the solution locally around the roots can be combined with local analytical approaches to reconstruct accurate root-soil interface conditions. We discuss the difference between time-independent and time-dependent approximations.
We then demonstrate many challenging numerical tests including a recent benchmark study that compares models from different research groups.
We briefly discuss the implementation of mixed-dimensional schemes in the open-source simulator DuMux.

Finally, we discuss some open questions regarding the inclusion of more complex interface physics in such mixed-dimensional models and detail the challenges stemming from the construction of the interface reconstruction model.

Speaker: Timo Koch (University of Oslo)

14:00 → 15:30 MS22: 2.3

14:00 Nano Porous Particle: A Novel Additive for Gas Storage Technology Based on the Hydrate Method

This study investigates the thermodynamic and kinetic characteristics of nano porous particle as an additive in the formation of CH4 hydrate, essential for hydrate technology applications and energy estimation in gas storage process. Thermodynamic analyses were conducted with varying nano porous particle concentrations. Differential Scanning Calorimetry (DSC) was employed to determine phase equilibrium temperatures and pressures within the range of 3-10 MPa. As pressure increases, the endothermic peak shifts to the right, indicating higher decomposition temperatures, and the peak of hydrate decomposition intensifies, signifying enhanced hydrate formation with increased pressure. Phase equilibrium points measured by DSC align with existing literature values, indicating that nano porous particle does not alter CH4 hydrate phase equilibrium under varying pressure conditions.
The kinetics of CH4 hydrate formation were examined under different nano porous particle concentration. Observations show a reduction in the induction time with increased nano porous particle concentration, attributed to enhanced gas solubility and increased nucleation sites in the porous medium. The porosity, specific surface area, and mobility of nano porous particle accelerate hydrate formation and enable it to adsorb more CH4 than pure hydrate, emphasizing its role in gas storage.
Raman spectroscopy was employed to analyze CH4 solubility in water with nano porous particle. Results demonstrate an increase in solubility with rising nano porous particle concentration, suggesting nano porous particle's significant role in promoting CH4 hydrate formation. This indicates potential efficiency improvement in CH4 hydrate production by substituting pure water with nano porous particle.
The stability of this nano porous particle immersed in water for various durations was analyzed by XRD and SEM, and the results were consistent without obvious structural changes. BET analysis confirms the stability of pore diameter and specific surface area. The good stability of nano porous particle can ensure the effectiveness of nano porous particle as an additive in the hydrate system.
In summary, this study reveals the thermodynamic, kinetic properties of CH4 hydrate formation in water with nano particles, providing insights into its potential applications and efficiency improvements in gas storage processes.

Speaker: Pengfei Wang (Southern University of Science and Technology)

14:15 Experimental Study and Process Modeling of Closed-loop LIB Recycling with Lithium Sulphate Electrodialysis

Lithium-ion batteries (LIBs) play a crucial role in urbanization and human life, providing essential energy storage capabilities distinguished by their high energy density, long cycle life, and low weight [1,2]. The hydrometallurgical method for recycling of spent LIBs is of great importance due to its remarkable features, including high metal recovery rates, their capacity for Li+ and Al3+ recycling, extraction of high-purity metals, operation at relatively low temperatures, and reduced energy consumption and emissions [3,4]. The conventional hydrometallurgical processes generate a sodium-enriched wastewater, requiring treatment prior to safe discharge. This study concentrates on a closed-loop recycling process for spent Lithium Nickel Manganese Cobalt Oxide (NMC) cathode material, depicted in Fig. 1. This innovative approach also aims to eliminate sodium ions through the deviation from conventional hydrometallurgical methods, concurrently repurposing dissolved ions within the disposal slurry, resulting in a more eco-friendly and cost-effective approach. Lithium hydroxide (LiOH) is utilized as the precipitating reagent in this process, while lithium recovery is conducted employing electrodialysis (ED) to regenerate LiOH and sulfuric acid (H2SO4) from the lithium sulfate solution. A portion of the LiOH and H2SO4 reagents is subsequently employed in the leaching and precipitation steps, establishing a closed-loop recycling system. To validate this approach, an experimental setup was established to study leaching, impurity removal, and metal extraction processes. The closed-loop recycling process was further investigated by the simulation of this process using Aspen Plus. Therefore, the Aspen Custom Modeler was employed to create the ED module in both continuous and batch configurations. Subsequently, this ED module was incorporated into Aspen Plus to integrate with the recycling process under experimental operational conditions. The minimal deviations of 3.34% and 2.38% within the precipitation and co-precipitation processes indicated the accuracy and validity of this work. Continuous and batch-mode EDs were integrated with the recycling LIBs process to extract LiOH and H2SO4 from the Li2SO4 solution resulting from the metal extraction procedure. Based on the results, a 40% greater recovery of LiOH solution from the Li2SO4 solution using batch-mode ED indicates the better performance of this mode compared to continuous configuration. The effect of time and temperature on the leaching efficiency is also investigated. As illustrated in Fig. 2, it was found that the enhancement of reaction time from 5 to 30 min resulted in the 33, 39, 45, and 73% increment on Li+, Ni2+, Co2+, and Mn2+ leaching efficiency, receptively. Also, the 53% increment of Li+ was observed by raising the temperature from 10 to 70℃.

Speaker: Ms Anahita Asadi (School of Automative Engineering, Wuhan University of Technology, China)

14:30 Process modelling of selective laser melting: Effects of powder bed quality and surface tension model

Selective laser melting (SLM), an additive manufacturing (AM) technique utilised for metals, is attracting increasing interest in creating complex and high-quality components. Compared to the traditional welding of bulk materials, the powder bed melting process in SLM presents a more complex physical profile arising from the molten-material flow in the interparticle voids. This work employed a numerical method to explore the evolution of the interfaces between different phases and understand this complexity. The interface features influence the defects of SLM-produced parts, including pore formation, fatigue life, and mechanical strength. Computational fluid dynamics (CFD) and discrete element method (DEM) were used to reproduce the melting and layering process, respectively. Compared with the CFD-DEM coupling method, the sequential method ignores the motion of particles during the melting while overcoming the inherent limitations of mesh size in the coupling method. In a fully resolved fashion, this CFD model can use a smaller mesh and accurately simulate the interactions between the laser beam and powder bed with fine-size particles. The simulated results were validated by benchmark experiments using the Ti-6Al-4V (Ti64) powder. This validated work further investigates the influence of packing quality, laser power, and surface tension model on the evolution of interfaces, and provides an effective way to evaluate the effects of processing parameters.

Speaker: yuyao Zhang

14:45 New insights in battery electrolyte behavior during cycling and heating of batteries using dynamic micro-CT

In this work, we present unique results of dynamic micro-CT to study the behavior of Li-ion batteries during two important events that determine battery quality and lifetime. First, we show the interactions between different battery components during the first few charge and discharge cycles of a battery, the so-called formation cycles. How these cycles are performed has a huge impact on the lifetime, capacity, and overall quality of Li-ion batteries. During these cycles the solid-electrolyte-interface (SEI), a thin layer on the surface of the electrode material, is formed. This SEI is formed by the reaction between the electrode and the electrolyte and serves as a layer where Li+ ions can be embedded and removed during further cycling of the battery. This makes optimizing the formation cycles one of the most important research topics in battery production. Since the SEI is very thin (100 nm), high-resolution methods such as (FIB)SEM are used to study it. Although dynamic micro-CT cannot visualize the actual SEI layer, it can be used to visualize 3D electrolyte movement in real time and study swelling and shrinking of the entire battery during cycling. For the experiment, 15 x 25 cm large pouch cells were pressurized and mounted in the TESCAN DynaTOM, a unique micro-CT system with a rotating gantry to allow for complex in-situ experiments. Using an externally controlled potentiostat, several charge and discharge cycles were programmed with specific charging speeds, and several high-quality static (60 minutes per scan) and fast dynamic (2 minutes temporal resolution) micro-CT scans were performed at 13 predetermined intervals during the 28-hours procedure. In this work, we show results on 4D electrolyte movement, gas formation and structural dynamics in these pouch cells.

In a second experiment, the behavior of cylindrical cells under increased temperatures was observed. Elevated temperatures as low as 60 °C already have a negative effect on lifetime and will result in degradation and irreversible damage. To observe the structural effect of increased temperatures, a 26650 cell was heated up to ~60 °C using Peltier elements powered through the slipring of the scanner’s rotation stage. In a series of dynamic and time-lapse micro-CT scans, the movement of the electrolyte in and out of the electrode layers was observed in 3D. Novel machine learning protocols enable segmentation of the different battery components (cathode, anode, electrolyte, and gas) and follow their movement over time. In further experiments, the effect of higher temperatures, and faster or longer heating will be examined.

Speaker: Jan Dewanckele (TESCAN XRE)

15:00 A combined ionic Lewis acid descriptor and machine-learning approach to prediction of efficient oxygen reduction electrodes for ceramic fuel cells

Improved, highly active cathode materials are needed to promote the commercialization of ceramic fuel cell technology. However, the conventional trial-and-error process of material design, characterization and testing can make for a long and complex research cycle. Here we demonstrate an experimentally validated machine-learning-driven approach to accelerate the discovery of efficient oxygen reduction electrodes, where the ionic Lewis acid strength (ISA) is introduced as an effective physical descriptor for the oxygen reduction reaction activity of perovskite oxides. Four oxides, screened from 6,871 distinct perovskite compositions, are successfully synthesized and confirmed to have superior activity metrics. Experimental character- ization reveals that decreased A-site and increased B-site ISAs in perovskite oxides considerably improve the surface exchange kinetics. Theoretical calculations indicate such improved activity is mainly attributed to the shift of electron pairs caused by polarization distribution of ISAs at sites A and B, which greatly reduces oxygen vacancy formation energy and migration barrier.
F

Speaker: Shuo Zhai (Shenzhen University)

15:15 Characterization and numerical investigation of 3D-printed porous organic cages for gas adsorption

Porous organic cages (POCs) are a class of emerging microporous materials with high porosity and selectivity for gas adsorption and separation.[1] As a representative of first-generation POCs, CC3 has huge potential for separating noble gases and volatile organic compounds (VOCs).[2] Traditional manufacturing techniques exhibit some limitations in immobilizing the porous materials into structural adsorbents, such as poor transfer efficiency, insufficient loading of active material, limited structural forms, etc.[3] Three-dimensional (3D) printing demonstrates significant advantages in building complex structures with controlled features, to fully exploit their potential.[4] In this study, we demonstrate a versatile approach to 3D print porous materials, successfully shaping CC3 into hierarchically porous architectures by direct ink writing (DIW)[5]. Through the rational design of formulations, we obtained inks that combine both printability and functionality and printed a series of filter prototypes. The optimization of flow physics by tailoring the geometric parameters can effectively improve the contact, diffusion, mass transfer, and energy loss.[6] This is achieved by utilizing computational fluid dynamics (CFD) to numerically investigate the flow behavior and interactions through the structures for gas adsorption applications.[7]
The bentonite-based hybrid additive was used in the formulation as its unique layer structure constructs an interlinked network.[8] This brings the inks with good plasticity beneficial for printability and also retains active sites for CC3. The linear and nonlinear viscoelastic behavior of the inks with different CC3 loading (from 0wt% to 70wt%) were characterized by the oscillatory shear rheology to quantitatively study their printability. These inks were constructed into multiscale porous structures using DIW, and it was found that the crystal structure (Fig. 1a) and the adsorption capacity (Fig. 1b) of CC3 can be well preserved. The specific surface area is positively correlated with the loading amount of CC3, which can reach 249.35 $m^2/g$ for 70wt% CC3 (Fig. 1b). However, the increase in CC3 content leads to a reduction in mechanical performance due to less shrinkage effect dominated by bentonite.[9]
Based on the printed structures (Fig. 1c and d), porous 2D repeating unit cells achieved with periodic boundary conditions with varying offset filament distance, pore size, and porosity were designed and simulated under different flow conditions using a commercial CFD package (Ansys Fluent). The extended Darcy-Brinkman-Forchheimer model was used to model the flow in the filament’s porous zone.[10] The numerical results reveal that as the Reynolds number (Re) increases, a recirculation region develops and gradually expands within the gas flow path. Increasing offset distance brings more curved streamlines (Fig. 1e) and leads to a rise of pressure drop and overall flow resistance. The effect of filament’s porosity and pore size on the pressure drop is investigated. This work provides a pathway for designing and fabricating high-performance adsorption systems, and can also be widely used for other functional materials for sustainable environment and energy applications.

Speaker: Mr Bin Ling (University of Liverpool)

16:05 → 17:35 Poster: Poster Session IV

16:05 3D multi-scale reconstructed structure and transfer properties of porous material based by multiple approaches

The micro and nano structures of porous material have strong influence on their transfer properties such as porosity, permeability, tortuosity and adsorption isotherm curves. In the construction and building material field, these properties are strongly related to hydro and thermal comfort, due to the fact that heat and mass transfer mechanisms are determined by the micro porous structure. In the present work, we aim to predict heat and mass transfer on such micro-nano structured materials, with a statistical quantification method that is extracted from morphology aspect. A large range of the pore size (from 20nm to 1mm) is covered and investigated by the multiple approaches, including FIB-SEM, X-Ray Tomography, and MIP (Mercury Intrusion Porosimetry). The 3D view of pore structures are obtained in concrete, as well as their size distribution, and pore zones. A reconstruct of 3D view of pore networks is extracted, with the spatial resolution of 20 nm/pixel. A global view of multiple testing methods and the corresponding size ranges are drawn to summarize the multi-scale approaches, for a potential further understanding of relationship between porous structure and thermal-hydro properties.

Speaker: Dr Xiaoyan MA (Lab. Navier, Ecole des Ponts, Univ Gustave Eiffel, CNRS)

16:05 A 3D image prediction method for the dissolution of carbonate rocks in CO2 sequestration in a saline aquifer

The factors that impact carbonate dissolution are intricate, making it imperative to have a comprehensive understanding of its characteristics for effective CO2 capture and storage (CCS) projects. While experimental or simulation techniques provide precise results, they can be computationally intensive and time-consuming. Alternatively, data-driven machine learning methods offer efficient regression prediction. In this study, we present a multi-scale hierarchical regression model based on residual neural networks, incorporating prior knowledge. This model incorporates equations for carbonate rock dissolution and incorporates relevant factors into 3D image data, using Dissolution Degree (Dd) parameters. These parameters enable image data to represent both pore space structure and dissolution information with physical significance. We employ pore phase and matrix phase grayscale thresholds (Pt, Mt) to eliminate noise in the characteristic maps. This ensures predicted dissolution characteristics align with practical physics knowledge. We tested our model on 5 core samples, including three from the test set and two samples with strong or weak correlation to the training set. Evaluation metrics included semantic segmentation evaluation parameters, porosity, geometric and topological structure parameters, Péclet and Damköhler numbers, porous media flow field simulations, and absolute permeability. The visual comparisons and quantitative analyses both indicate a strong alignment between predicted and experimental outcomes. The trained multi-scale hierarchical regression residual neural network with prior knowledge (MSR-Net) exhibits excellent accuracy and generalizability. This study's findings confirm that the model, grounded in MSR-Net, can effectively predict the dissolution properties of the pore space in the formation where the core was extracted, as well as adjacent formations.

Speaker: Chao Liang (China University of Petroleum (East China))

16:05 A novel evolutionary optimization approach via surrogate model and autoencoder for reservoir development scheme design

The underground reservoir is a typical porous system, and the oil is stored as fluid in the pores of the reservoir. The efficient extraction of oil, which is primarily dependent on the reservoir development scheme, is a significant challenge. However, traditional reservoir development optimization methods mainly rely on manual experience or limited numerical simulation-based comparisons of development schemes. Typically, the issue of a reservoir development scheme optimization is high-dimensional when the reservoir is complicated. The proposed surrogate-assisted and autoencoder-based evolutionary optimization framework is ideally suited for addressing this challenging problem in reservoir development scheme optimization. This work intends to improve the cooperative optimization capability balancing exploration and exploitation. The autoencoder is used to map the decision space to the low-dimensional space for evolutionary optimization, thereby maximizing the value of the solutions with relatively poor performance. Surrogate model is utilized in the original high-dimensional space to pre-screening for quickly recommending new promising solutions, which further boosts the searching performance. Through the cooperation of autoencoder and surrogate model, the optimization performance for the reservoir development scheme is strengthened. This approach is tested in the reservoir cases, and the experimental results show the obtained development scheme can get more oil from the reservoir porous system. Therefore, the approach has a lot of potential for dealing with reservoir development scheme optimization design issues.

Speaker: Mr Qinyang Dai (School of Petroleum Engineering, China University of Petroleum (East China))

16:05 A Semi-Analytical Method for Predicting Three-Phase Flow Production in Condensate Gas Reservoirs

During the condensate gas production process, condensate oil will precipitate, the phase state will change, and the seepage mechanism is complex. There are currently few analytical models for multiphase flow. Therefore, a semi-analytical method for three-phase flow production in condensate gas reservoirs is studied. Considering the vaporized oil ratio, solution gas-oil ratio, and solution gas-water ratio, the differential equations of oil saturation and water saturation are obtained through the two expressions of each of the production gas-oil ratio and the production water-oil ratio. The relationship between saturation and pressure can be solved. Given the gas rate, based on the three-phase material balance equation, the average reservoir pressure at any point in time is obtained, and then the production gas-oil ratio and production gas-water ratio are obtained, so as to obtain the changes of oil rate and water rate over time. From the pseudo steady state gas rate formula, the bottom hole flowing pressure can also be obtained. Compared with the numerical simulation results, the correctness of this method is verified. This method considers the three phases of oil, gas, and water, including dissolved gas and volatile oil, and provides an efficient semi-analytical approach for production dynamic analysis, which facilitates the practical application of petroleum engineers in condensate gas reservoirs.

Speaker: Yaxian Wang

16:05 A system for characterizing microstructure changes and mechanical responses of fine-grained gassy sediments

Fine-grained marine sediments containing veiny and nodular gas hydrates will evolve into fine-grained gassy sediments after hydrate dissociation due to climate-driven ocean warming. Mechanical properties of the fine-grained gassy sediments are basically acquired by ocean engineering design. However, they have not been fully understood largely due to the lack of microstructure visualization. In this paper, a new system is developed to jointly conduct X-ray CT scans, oedometer tests, and seismic wave testing on a single specimen with temperature being well controlled, allowing varieties of experimental data to be acquired effectively and automatically. The results show that stress history can hardly affect the undrained stiffness of fine-grained gassy sediments, while the drained stiffness of fine-grained sediments without gas bubbles is stress history dependent. After being unloaded, many microstructure changes remain, and examples include the free gas distribution being more concentrated and the connectivity among gas bubbles becoming much better. The multi-orientation system lays the foundation to further studies on microstructure changes and mechanical responses of fine-grained gassy sediments associated with gas hydrates.

Speaker: Lele Liu (Qingdao Institute of Geology, China Geological Survey)

16:05 A UFNO-based deep learning approach for estimating CO2-EOR and storage potential

Currently, Carbon Capture, Utilization, and Storage coupled with Enhanced Oil Recovery (CCUS-EOR) is a key solution for carbon dioxide sequestration and increasing oil field recovery rates. However, research on enhancing recovery rates through CO2 injection faces challenges of slow numerical simulations and a substantial potential for improvement in deep learning capabilities. To enhance efficiency, we have adopted the U-FNO neural network architecture, renowned for its exceptional accuracy, speed, and data utilization efficiency. U-FNO is designed based on the Fourier Neural Operator (FNO), which excels in solving partial differential equations (PDEs). In comparison to FNO and DeepONet, U-FNO demonstrates superior accuracy in predicting saturation, production, and CO2 storage quantities. The trained model serves as a versatile alternative for addressing 3D CO2 storage and enhanced recovery issues, outperforming traditional simulators in terms of speed. It provides an effective tool for evaluating storage potential and production forecasts.

Speaker: Guoqing Dong (Xi’an Shiyou University)

16:05 Analysis of CO2 huff and puff displacement effect of shale oil in Block A

In response to the low porosity and permeability of shale oil reservoirs in Block A, as well as the difficulty in producing shale oil, nuclear magnetic resonance experimental technology and high-temperature and high-pressure CO2 huff and puff experimental technology were used to study the effects of shale oil huff and puff pressure, extraction rate, maturity, and shale oil composition on CO2 huff and puff oil recovery efficiency, and to explore the occurrence characteristics of shale pore fluids in the T1-T2 two-dimensional spectrum. The experimental results show that the rapid extraction of shale oil is 7.43 percentage points higher than the slow extraction, but excessive pressure drop in the formation can cause strong stress sensitivity, and the actual production process needs to optimize the extraction speed; The extraction rate of high maturity shale is 11.13 percentage points higher than that of low maturity shale. Optimizing favorable desserts for development is an effective method for energy conservation and efficiency improvement; When the throughput pressure approaches the formation fracture pressure, it can significantly increase the shale oil recovery rate; After CO2 huff and puff, shale oil still retains immovable oil in large pores and bedding fractures in the T1-T2 two-dimensional spectrum.

Speaker: sen deng (Exploration and Development Research Institute of Daqing Oilfield Co Ltd)

16:05 Analyzing Impacts of Gas Evolution within a Batch-Mode Electrodialysis of Lithium Sulfate using Two-Phase Flow CFD Simulation

Electrodialysis (ED) technology relies on the selective permeability of ion exchange membranes, which allows for the separation of ions in a solution under the influence of an electric field [1,2]. ED has been frequently used for recovery of acids and bases [3,4]. Due to the growing demand for electric vehicles and the crucial need for recycling the lithium-ion batteries (LIBs), this study investigates the ED of Li2SO4 solution, aimed at comprehending the efficacy and requisite control measures for effective closed-loop recycling of spent LIBs. The enhanced flexibility and energy efficiency of batch-mode EDs highlight the significance of time-dependent models. The gaseous molecules evolved from electrochemical reactions induce localized turbulence, significantly impacting the velocity, potential, and concentration distributions. This study presents a two-phase model that analyzes the dynamic behavior of a batch-mode Li2SO4 ED and investigates the bubbles’ impact employing an Euler-Euler model. The finite element method solves time-dependent hydrodynamic, mass conservation, and electrochemical equations. The excellent agreement between the model and experimental data shows the accuracy and validity of this model, emphasizing its applicability to analogous electrochemical processes such as electrolysis. According to the results of this two-phase flow model, the maximum volume fraction of H2 and O2 bubbles at the surface of the cathode and anode are 9% and 5%, respectively. As illustrated in Fig. 1, It is observed that the buoyant and drag forces induced by bubbles lead to a significant increment in liquid velocity and circulation of electrolyte solutions in concentrate channels. The bubble-induced turbulence disrupts the uniform velocity distribution near electrodes and increases the liquid velocity magnitude. This circulation of electrolyte solution declines the average concentration polarization across IEMs and increases ionic fluxes, particularly on the concentrate side of IEMs, which leads to the improvement of ED performance, as observed in Fig. 2. The liquid circulation leads to a substantial 60% reduction in the average Li+ concentration polarization across the CEM. In this case, the average total Li+ flux enhances by 12%, resulting in the significant increment of average Li+ concentration from 551 mol•m-3 to 768 mol•m-3 at t=2 hours. Furthermore, the enhancement of current density and reduction of bubbles diameter results in the increment of gas volume fraction. Increasing the flowrate causes a decrease in the average gas volume fraction and eliminates the impact of bubbles on the liquid velocity, as shown in Fig. 3. The effect of bubbles on ohmic overpotential is also discussed, and it is understood that it is highly dependent on inlet flowrate and liquid circulation. The presence of bubbles increases the ohmic overpotential by approximately 0.5 V in high inlet flowrate, F_in=0.3 L•s-1, that no circulation is observed. However, when electrolyte solutions circulate at low inlet flowrates, F_in=0.03 L•s-1, a higher ionic concentration and consequently lowers ohmic overpotential of electrolyte solutions are observed.

Speaker: Ms Anahita Asadi (School of Automative Engineering, Wuhan University of Technology, China)

16:05 Application of 2D and 3D imaging technology in the observation of porous media containing natural gas hydrates

Natural gas hydrate is a potential new type of energy, mainly found in sediments in marine or terrestrial permafrost regions. The content, distribution, and growth or decomposition of natural gas hydrates in sediment pores or fractures, greatly affect the physical properties of the medium. This study mainly introduces the experimental techniques and methods for micro and nano scale imaging of porous media containing natural gas hydrates based on Micro-CT and Cryo-SEM. In response to the observation needs of natural gas hydrates at low temperature or high pressure, a dedicated auxiliary observation container has been independently developed, which can observe the microscopic morphological changes of hydrate growth and decomposition processes. At the same time, a non-destructive transfer device suitable for CT and SEM scanning was also designed, aimed at conducting CT and SEM imaging observations on the same sample, achieving joint observation of CT images and SEM images. In addition, a fusion method for micrometer and nanoscale digital core images has been developed, which utilizes self supervised learning algorithms in machine learning to achieve a 2x and 4x increase in spatial resolution of CT images.

Speaker: Chengfeng Li

16:05 Application of pore throat characteristics research of deep-water globigerina limestones in acid fracturing effectiveness analysis: a case study of the Pearl River Formation in Baiyun Sag, Pearl River Mouth Basin

Deep-water limestone reservoirs contain a large amount of oil and gas resources. Acid fracturing is an important technical means for the development of carbonate reservoirs, and the compatibility between the acid fracturing method and formation directly determines the development effect of reservoir. A large number of argillaceous and silty globigerina limestones deposited in deep-water environment on the continental slope are developed in the the Pearl River Formation in Baiyun Sag, Pearl River Mouth Basin. The limestones is composed of micrite, terrigenous debris, and bioclasts, dominated by biogenic cavities, with high porosity and low permeability physical characteristics. Acid fracturing diversion experiments with different acid liquid systems and acid injection methods did not significantly improve the fracture conductivity. Characterize the changes in pore throat structure before and after acid fracturing through casting thin section, micro-CT, electron probes, etc. The experimental results show the bio-cavity backfill corroded seriously with the bio-shell not corroded obviously；for muddy interstitial materials widely developed in the reservoir, effective dissolution not occurred in acidic environment, exhibited typical high porosity and low permeability to ultra-low permeability characteristics, and the effect of acid fracturing transformation poor (the conductivity under 20MPa is less than 0.005 D·cm); easy to deform (especially under external pressure) due to particle point-contact relationship, argillaceous miscellaneous filled and poor cementation, further blocking the seepage paths. Under the tectonic background, source supply, and sedimentary environment, although carbonate mineral components are enriched, the acid fracturing dissolution effect shows obvious selective characteristics, which improves pore parameters but fails to effectively improve permeability, resulting in poor acid fracturing effect.

Speaker: Hao Du (Yangtze University)

16:05 Characterization of Fluid Mobility and Determination of Movable Pore Throat Lower Limit in Deep Tight Sandstone Reservoirs Based on Nuclear Magnetic Resonance

Study on the Fluid Mobility Within Reservoir Microscopic Pore Throats Holds Significance for the Precise Evaluation of Reservoirs and the Efficient Development of Oil Fields. Nuclear magnetic resonance can rapidly and accurately determine common movable fluid parameters such as movable fluid saturation, movable fluid porosity, and bound fluid saturation. This enables effective fluid assessment and productivity prediction for various types of oil and gas reservoirs. In this research, different facies' sandstone fluid mobility and the lower limit of movable pore throats in lacustrine delta-turbidite systems were characterized via multi-gradient centrifugation nuclear magnetic resonance. This study, combined with experiments including particle size analysis, thin sections, X-ray diffraction, and high-pressure mercury tests, explicitly delineates the impacts of reservoir deposition, diagenesis, reservoir type, and microscopic pore structure on movable fluid saturation. The research findings reveal three types of lithofacies, three categories of pore throat structures, and three classes of pore throat spaces (micropores, sub-micropores, and nanopores) in the study area. Micropores and sub-micropores are prevalent in blocky and laminated fine sandstones of the delta front facies, with higher fluid migration rates in micropores than in sub-micropores, and nanopores exhibit the lowest rates. Turbidite facies mudstone fine sandstone and calcareous fine sandstone contain sub-micropores and nanopores, showing the highest fluid migration rates in sub-micropores. Fluid mobility is influenced by various factors such as rock physical properties, diagenetic minerals, pore-throat structures, and lithofacies. As pore-throat structures and petrophysical properties deteriorate, the fluid mobility in all three types of reservoirs decreases. The movable fluid content shows a significant correlation with feldspar content, highlighting the improved fluid mobility of feldspar dissolution pores. Conversely, carbonate minerals and clays (plastic minerals) exhibit a negative correlation with movable fluid percentage (MFP), resulting in reduced quality of reservoirs and pore structures. Additionally, the sand ratio (sandstone thickness/formation thickness), sandstone layer thickness, and distance from source-reservoir boundary affect the movable fluid saturation. Thicker sandstones with lower mud content and carbonate cement show higher movable fluid saturation. Conversely, thin sandstones often embedded in thick mudstones exhibit higher carbonate and clay content at source-reservoir interfaces, leading to decreased movable fluid saturation. Moreover, with increased centrifugal force, micro-nano-pore fluid production initially increases rapidly and then stabilizes. Under 2.75 MPa, nanopore fluids migrate towards micropores, calculating a movable pore throat radius of 18nm~30nm. The research outcomes contribute theoretical references for understanding and effectively developing deep tight sandstone reservoirs.

Speaker: Mr Yuchao Wang (China University of Petroleum (Beijing))

16:05 Comparative verification of hydro-mechanical fracture behavior: Task G of international research project DECOVALEX–2023

Numerical simulations become necessary when experimental approaches cannot cover the required physical and time scale of interest. One such area is a simulation of long-term host rock behaviors for nuclear waste disposal and simulation tools involved in the assessment must go through rigorous validation tests. The DECOVALEX project (Development of COupled models and their VAlidation against EXperiments) is dedicated to this purpose by international participants\footnote{www.decovalex.org}.
This work is part of the ongoing phase DECOVALEX--2023 (D--2023, Task G) particularly aiming to simulate fracture behaviors under various conditions. Here, we cross-verified a variety of numerical methods including continuous and discontinuous approaches against four benchmark exercises with emphasis on numerical accuracy and parameterization of the various numerical approaches. The systematic inter-comparisons of test cases highlight the advantages and disadvantages of the different numerical models. Numerical details on discretization effects (e.g. mesh density and orientation) and domain size were investigated in detail for practical applications. It became evident that meticulous attention to mesh resolution and domain size is imperative for achieving accurate numerical simulations, even for static cracks. Moreover, when comparing numerical methods to closed-form solutions for static cracks, all models successfully reproduced the maximum crack opening but encountered challenges near the crack tips. Finally, the paper discusses how to convert between and therefore compare parameters of various numerical approaches. Our benchmark studies reveal that each model necessitates a distinct number of parameters, even in simple scenarios like static crack aperture benchmarks. It is generally more practical to employ fewer parameters to mitigate model over-parameterization and enhance experimental feasibility.

Speaker: Prof. Olaf Kolditz (Helmholtz Centre for Environmental Research)

16:05 Controllable generation of porous media hybrid multiple-point statistics and sliced Wasserstein metric

Porous media have a wide range of applications in various engineering fields. Accurate modeling microstructure of porous media is the basis for subsequent numerical analyses and structure–property relationship researches. Computational reconstruction methods play an important role in these studies, can address limitations of some imaging techniques that are difficult to directly model three-dimensional (3D) structures, such as 2D-to-3D microstructure reconstruction and specific structure generation, and provide a fast and efficient way to model microstructures. Current computational reconstruction methods include traditional methods and machine learning-based (or deep learning-based) methods. Compared with traditional methods, machine learning-based computational reconstruction methods show advantages in reconstruction accuracy and speed. However, such machine learning-based methods also have limitations in interpretability, controllability, generalization, and small data sample application, which make it difficult to deal with various reconstruction tasks. In the previous study, we developed a hybrid method combining multiple-point statistics and machine learning, which is capable of handling 2D-to-2D, 2D-to-3D, and 3D-to-3D reconstruction tasks. Whereas, there are still some limitations in dealing with controllable and conditional generation tasks.

To further improve the reconstruction performance, we propose a novel controllable generation method hybrid multiple-point statistics and sliced Wasserstein metric, design a controlled sampling strategy and a conditional reconstruction strategy, and make progresses in dealing with controllable and conditional generation tasks. In this method, multipoint statistical information is adopted for microstructure characterization and sliced Wasserstein metric and gradient optimization are used for microstructure reconstruction. The controlled sampling strategy enables microstructure generation for any given phase volume fraction, by sampling with purpose from multipoint statistical information of training images. While the conditional reconstruction strategy can generate different microstructures satisfying the condition data. In addition, the proposed method only requires a single data sample (a 2D image or a 3D structure) to complete the above tasks, which has advantages in controllability, generalization, and small sample data application. Finally, to verify the reconstruction performance of our method, multiple sets of experiments are performed on a variety of porous media images (e.g., porous rocks, silica materials, battery electrode materials, and synthetic ceramics), by generating microstructures with different phase volume fractions and condition data from a single data sample. Comparisons of visualization, statistical parameters such as two-point probability function and linear path function, and numerical analysis are adopted to further show the effectiveness of our reconstruction results.

Speaker: Dr Zhenchuan Ma (College of Electronics and Information Engineering, Sichuan University, China)

16:05 Criss-Cross Physics-Informed Convolutional NeuraNetworks for Prediction of Fluid Flow in Porous Media with Spatial Heterogeneity

Recent breakthroughs in deep neural networks have brought about transformative insights into the realms of physics, engineering, and scientific computing. Addressing the integration of neural networks with physical simulation remains a paramount research focus, where the physics-informed neural network (PINN) stands out as a widely adopted framework due to its versatility in constructing neural networks and exceptional generalization capabilities. However, challenges arise in enforcing flux continuity across boundaries between cells with varying physical properties, particularly in scenarios involving spatial heterogeneity. This work introduces a novel paradigm, the criss-cross physics-informed convolutional neural network (CC-PICNN) learning architecture, specifically designed to address the solution of parametric partial differential equations (PDEs) in the presence of spatial heterogeneity in physical properties. The central objective is to seamlessly enforce flux continuity while imbuing convolutional neural networks (CNNs) with meaningful physical interpretations. A key innovation is the introduction of a predefined 2D convolutional layer to accurately express transmissibility between adjacent cells. To assess the effectiveness of the proposed CC-PICNN method, a comprehensive evaluation is undertaken using petroleum reservoir problems characterized by spatial heterogeneity. The performance of CC-PICNN is benchmarked against the state-of-the-art PINN through meticulous numerical analyses, revealing the superior efficacy of the proposed method. This research not only contributes to advancing our understanding of addressing spatially heterogeneous scientific challenges but also provides a more robust and effective solution compared to existing approaches, particularly PINN. The proposed CC-PICNN framework holds promise for applications demanding accurate modeling of physical properties in diverse scientific domains.

Speaker: Haiyang Chen

16:05 Diffusion Hysteresis in Unsaturated Water Flow: A Microfluic study

In unsaturated flow studies, water saturation is commonly used as the sole descriptor for macroscale flow models. However, this approach often results in hydraulic hysteresis in capillary pressure and relative permeability during drainage and imbibition processes. Furthermore, the effects of these behaviors on solute diffusion remain unclear. To address this knowledge gap, we conducted microfluidic experiments to investigate these hysteresis relationships. We firstly implemented drainage and imbibition processes in the micromodel to establish pore-scale water configurations. Subsequently, we upscaled the capillary pressure and diffusion coefficients to the Representative-Elementary-Volume scale. Our results revealed that, at the same saturation levels, the unsaturated diffusion coefficients during drainage were at least 6.1% higher than during imbibition, indicating the presence of diffusion hysteresis. We observed that this hysteresis was influenced by capillary number and residual water saturation. An increase in the capillary number reduced diffusion hysteresis, similar to the capillary pressure hysteresis. While a decrease in residual saturation rose diffusion hysteresis. We also proposed a quadratic polynomial model that effectively predicts the diffusion coefficient by incorporating both saturation and capillary pressure. This research emphasizes the importance of historical changes in unsaturated water flow, which hold significant implications for modeling solute transport processes.

Speaker: Ms 雅娟 庄 (浙江大学)

16:05 Effect of co-injection of acidic impurity gas and seawater on geological sequestration of CO2 in basalt

Carbon Capture and Storage (CCS) can be realized efficiently and safely by collecting atmospheric carbon dioxide (CO2) and injecting it into basalt formations in a dissolved state by co-injection of CO2 and water. In the actual storage, the collected CO2 may also contain a variety of soluble acidic impurity gases, and co-injection of acidic impurity gases with CO2 can significantly reduce the economic cost of gas collection, but the acidic impurity gases will be reacted before CO2, and there is a possibility of inhibiting the carbonation process of the minerals. In addition, the co-injection of CO2 and water is highly efficient, but it requires high freshwater resources. For coastal areas, seawater can be used instead of freshwater to reduce the dependence on freshwater resources, but at the same time, seawater injection is also more likely to affect the process of mineral sequestration. We used transparent quartz capillary tubes to simulate the reaction process between CO2 and basalt under geological reservoir conditions, and quantitatively observed the mineral reaction process after the addition of sulfur dioxide (SO2) and sodium carbonate (Na2CO3) solutions with the help of in-situ Raman spectroscopy, so as to reveal the influence of SO2 acidic gas and carbonate solution on the sequestration process of CO2 basalt. The results show:
(1) In the system consisting of only CO2 and pure water, CO2 is dissolved into water first, and then carbonate will gradually appear on the surface of basalt particles.
(2) When SO2 is added, SO2 and CO2 are dissolved into water at the same time, but sulfate and sulfite minerals appear first on the surface of basalt particles, and carbonate rocks appear on the surface of basalt particles only after SO2 is consumed by the reaction and the process of CO2 mineral sequestration occurs.
(3) The addition of Na2CO3 significantly limits the dissolution of CO2 into the water, but does not affect the dissolution of SO2. This allows SO2 to still react with basalt, while CO2 has difficulty reacting with basalt to produce carbonate minerals. This suggests that the presence of carbonate in solution further inhibits CO2 mineralization from occurring.

Speaker: Dr Zhe Wang (College of Marine Science and Technology,China University of Geosciences (Wuhan))

16:05 Effect of flow rate and fluid chemistry on Precipitation Patterns in acidified shales

Hydraulic fracturing is an important technique used to stimulate the productivity of shale reservoirs. During the fracturing process, mineral dissolution and precipitation usually occur due to the reuse of the hydraulic fracturing fluid (HFF) in the shale reservoirs. However, the consequences of interactions between the shale matrix and the flow-back HFFs on shale matrix remain unclear. A microfluidic chip fabricated with fractured shale was used to investigate the dynamic acidification process by injecting hydrochloric acid (HCl) under pH=2, and the subsequent precipitation processes by simultaneously injecting barium chloride (BaCl₂) and sodium sulfate (Na₂SO₄) solutions under different flow rates and pH conditions. The depth of the altered zone in the shale matrix caused by acidification and the distribution of barite precipitation due to fluid mixing were observed and characterized by an optical microscope and SEM-EDS.
With the injection of HCl, the thickness of the alteration zone gradually increased, and the increase rate decreases gradually due to the increase of diffusion path . Under the condition that the total injected solution volume is fixed, the higher the injection flow rate is, the slower the increase rate of alteration zone is. When BaCl₂ and Na₂SO₄ solutions were injected under different pH conditions (pH = 2,8,11) and flow rates(q=1.2, 4, 12, 24μl/min), as the pH increases and the flow rate decreases, the precipitation rate gradually increases, and the main distribution of precipitation shifts from the acid-etched shale matrix to the shale-fluid interface near the fracture channels.
Results demonstrate that the precipitation pattern is controlled by the localized concentration of reactants and geometry of the shale matrix, depending on the injected fluid chemistry and flow condition. This study provides valuable insights into the stimulation efficiency of shale reservoirs under the coupled effects of dissolution and precipitation with different operational conditions.

Keywords: shale matrix, hydraulic fracturing fluids, acidification, barite precipitation

Speaker: qiurong Jiang (Wuhan university)

16:05 Evaluation through Petrographic and Petrophysical Properties: A 3D Digital Rock Case Study on Beach-Bar Sandstone of Boxing Sag, East China

Precise and fine mapping of minerals, pores and microporous phases with 3D X-ray micro-computed tomography (3D μ-CT), 2D back-scattered scanning electron microscope (BSEM) imagery and 2D quantified, automated SEM-EDS mineral analysis (QEMSCAN) can play a significant role in reservoir characterization. Subsequently, it aids to identify and elucidate pore types, connectivity, and distribution in a texturally low maturity, thin bedded, medium to low permeability silt to sand sized clastic reservoir. In this paper, an integrated core to pore scale approach is adopted to compute macro scale petrophysical rock parameters such as porosity, permeability, formation factor, and pore throat size and distribution directly from 3D digitized rock images. A sub-plug of a sandstone was imaged in 3D μ-CT in dry and saturated states. A quantified, 3D pores space map, including microporosity, was created by registering into perfect geometric alignment the two tomograms. Quantified, 3D mineralogical mapping along with association of pore and grain structure was performed by registering the high-resolution BSEM image and quantified 2D mineral map with the 3D μ-CT images. The association was characterized by the identical microporosity to elucidate the mineralogical information. The nature of interconnect primary and secondary pores were also determined and quantified. Computational digital rock results of porosity and permeability reveal good agreement with conventional laboratory core measurements. The computed properties from this technique are reliable and can be used for reservoir quality assessment and field development programs. 3D μ-CT through imaging and visualization of core material at the pore scale and subsequent analyses gives substantial understandings into properties of low permeability reservoir core material. Furthermore, subsequent developments will make this technique more common and easy to use.

Speaker: Dr Muhammad Jawad Munawar (Institute of Geology, University of the Punjab, Lahore 54590, Pakistan)

16:05 Experimental study on microscopic pore-scales crude oil production characteristics and influencing factors during dynamic imbibition of shale reservoir with online NMR

Dynamic imbibition and displacement between the matrix and fractures in shale reservoirs can significantly enhance oil recovery (EOR) following initial depletion. However, the microscopic production characteristics and seepage mechanisms at different pore scales during the dynamic imbibition process remain incompletely understood. In this study, we established an online physical simulation experiment method that combines dynamic displacement and imbibition based on nuclear magnetic resonance (NMR), and a series of online NMR water flooding dynamic imbibition experiments were conducted. Through real-time dynamic monitoring of multiphase flow and migration behavior of crude oil in each stage of dynamic imbibition, the microscopic production characteristics and influencing factors were quantitatively studied from the recovery and residual oil saturation field distribution of different scale pores, the contribution mechanism of imbibition and displacement to EOR were investigated, and the multiphase and multi-scale dynamic imbibition crude oil migration and seepage models are discussed. The results show that shale oil occurrence pores can be categorized into two types based on the corresponding production mode (imbibition + displacement). The imbibition effect predominantly governs the recovery of small and large pore walls, while displacement primarily occurs in large pores and fractures. The water flooding dynamic imbibition process in shale reservoirs unfolds in three stages: strong displacement and weak imbibition stage characterized by the rapid production of large pores and fractures under displacement action; weak displacement and strong imbibition stage involving the slow production of small pores under reverse imbibition; and dynamic equilibrium stage characterized by weak displacement and weak imbibition. Viewing the entire water flooding dynamic imbibition process as an organism, it becomes imperative to maximize the recovery of large pores while ensuring the recovery degree of small pores. High permeability contributes to better pore throat connectivity, shorter imbibition equilibrium time, and a greater imbibition and displacement production degree. The contribution of the two production modes to the recovery of small and large pores increased by 4.67% and 3.17%, respectively. A negative correlation was observed between high displacement pressure and imbibition recovery, yet it is conducive to the contribution of displacement to total recovery. Notably, fractures can effectively increase the imbibition contact area, reduce oil-water seepage resistance, and increase the contribution of displacement to recovery by 21.65%. Effectively utilizing the bridge flow conductivity of fractures is crucial for improving matrix oil production. This study provides theoretical support for clarifying the interaction between matrix-fracture imbibition and displacement and for the efficient development of shale oil.

Speaker: Dr Meng Du (University of Chinese Academy of Sciences, Beijing, 100049, China)

16:05 Finite digital core reconstruction based on CVAE-GAN

Digitalization of cores refers to the process of converting the physical and structural information of real core samples into digital form for the purpose of digital modeling, analysis, and visualization. In the process of digital core image imaging, due to the limitations of detector hardware and rock physical properties, there must be a trade-off between image field of view (FOV) and image resolution.To obtain high-resolution rock images, a compromise often needs to be made at the expense of a wide view. In light of these challenges, we propose a novel digital core reconstruction method utilizing Conditional Variational Autoencoder Generative Adversarial Network (CVAE-GAN). This approach integrates the stability training of Conditional Variational Autoencoder (CVAE) and the capability of Generative Adversarial Network (GAN) to generate realistic images. The method aims to produce high-quality digital core images from small field of view images, introducing random noise to achieve image diversity. Additionally, we used the Wasserstein GAN with gradient penalty (WGAN-GP) during the training process to enhance the stability of the neural networks. We performed experimental evaluations using different types of samples to verify the validity of our reconstruction method. Experiments prove that our method outperforms some numerical reconstruction methods in terms of practicality and efficiency.

Speaker: yingqi zhang

16:05 Finite-size scaling for the connectivity, permeability, and dispersion of discrete fracture networks

Translating fracture statistics to global hydraulic properties in subsurface fractured rocks is a complex but appealing task, as measuring parameters such as permeability can be prohibitively expensive. To tackle this challenge, we developed the finite-size scaling (FSS) hypothesis, drawing inspiration from percolation theory in statistical physics. We created numerous Monte Carlo iterations using our CUDA-based code, cuDFNsys, to simulate flow and transport in discrete fracture networks (DFNs). We generated a wide range of DFN scenarios with vastly different input parameters to ensure generality. We then nondimensionalized the obtained connectivity, permeability, (asymptotic) dispersion coefficients, density of fractures, domain sizes, and so on. By analyzing the dimensionless quantities, we found that the FSS hypothesis can predict connectivity, permeability, and dispersion as an invariant function of dimensionless density and domain sizes with several universal critical quantities. Furthermore, the FSS function can identify the transition point of dimensionless density, where permeability remains constant regardless of domain sizes. Around this point, the scale-dependence of permeability changes from negative to positive. Our findings provide a strong theoretical foundation for understanding the relationship between fracture attributes and field-scale hydraulic properties. This research inspires further investigation into applying the FSS function at the field scale, which will improve the information that earth scientists can obtain from fracture statistics

Speaker: Tingchang Yin (Westlake University)

16:05 Fractal characteristics of natural fractures in continental shale reservoir and their effects on permeability

The development characteristics of natural fractures are restricting the efficient development of low permeability reservoirs, but the existing methods not only cannot achieve a quantitative characterization of natural fractures, also cannot achieve quantitative analysis of their effect on permeability. Therefore, based on fractal theory, SEM technology, image processing and permeability measurement were used to solve this problem in continental shale reservoir. Results show that the development degree of natural fractures varies greatly in different bedding directions, fractal dimension can be used to quantitatively characterize the development degree of natural fractures and reservoir permeability in different bedding directions. Compared with vertical bedding, the fractal dimension of natural fractures in parallel bedding direction is much larger, natural fractures are more developed and have better fractal characteristics. However, the permeability of cores with parallel bedding is much smaller, which is 1/7 of that of cores with vertical bedding. Meanwhile, the permeability of cores with vertical bedding increases with the fractal dimension of natural fractures in vertical bedding direction increasing, while the permeability of cores with parallel bedding decreases with the fractal dimension of natural fractures in parallel bedding direction increasing. The results are of great significance for guiding the efficient development of oil and gas in continental shale reservoir.

Speaker: Xiaoming Wang (Xi'an Shiyou University)

16:05 Improving chemo-mechanical properties of wellbore cement for deep wellbore conditions in the presence of CO2

Abstract
In recent times given the wealth of advancement in scientific research, scientific evidence has shown that CO2 accounts for over 75% of greenhouse gas emission rise between 1990 and 2021 and is projected to further increase due to increasing energy demands in developing countries. Amongst several mitigation tools, The CCS stands out as the most efficient mitigation tool and is projected to reduce CO2 emission by over 20% in 2020 and about 55% cumulatively by 2100.
However, CCS application in its final stages encounters an imminent challenge of unwanted CO2 leakage and fluid migration through the agencies of geological and engineering pathways. While geological pathways account for leakages credited to altercations of geological reservoir play elements similar to conventional petroleum wells, engineering pathways consist of leakages credited to wellbore integrity-related issues, encompassing all wellbore integrity systems such as the casing program, well cementing design program, and material selection which is the focus of this study. CO2 leakage accounted for by wellbore integrity-related issues occur due to the carbonic acid vulnerability of Portland cement seal, credited to the chemical interaction of CO2, formation water, with in-place cement sheath. As diffusion drives chemical interaction, it is further propagated by default cement sheath transfer properties with carbonation front expanding into cement core completing a series of calcium hydroxide precipitation, bicarbonation, and eventual cement matrix leaching, leaving a depleted cement sheath characteristic of low mechanical strength and degraded gas and fluid migration barrier systems.
Several advances have been made in literature in the last decade, especially in conventional petroleum wells in CO2-rich environments, such as the alteration of cement-to-water ratio, use of non-portland cement, application of special cements and application of pozzolanic materials all of which unfortunately range from high-cost complication to durability deficiencies and thus, allows for continuing research.
This research focuses on developing a chemo-mechanical efficient cement composite suitable for geologic sequestration through a CO2 mechanism of degradation inclined method development, and thus consists of concept building, determination of key performance areas for an efficient cement sheath, identification and characterization of high-performance single material additives through secondary and experiment-based data analysis, and development of hybrid additives based on high performance, mechanism and compatibility exploring petrophysical, physical, mechanical, and chemical analysis sets geared towards efficient and effective performance and characterization. Results of the chemical composition show significant chemical potential for strength improvement and acid resistance by diffusion inhibition, while Results of the chemical composition show significant chemical potential for strength improvement and acid resistance by diffusion inhibition. The outcome of the study will proffer a tripartite enhancement intervention across chemical, petrophysical, and mechanical properties of wellbore cement sheath.

Speaker: Chigbo Waliezi (The University of Manchester)

16:05 Investigation of pore-scale evaporative drying, salt precipitation and crystallization migration in CO2 injection process by a lab-on-a-chip system

The current research work mainly focuses on the NaCl-based formation brine, and the influence of different types by formation brine on the salt precipitation have not yet been investigated. Also, the damage effect of local salt crystals on the pore structure and the migration mechanism of salt crystals after precipitation remains unclear. Based on this, this study aims to investigate the effect of different brine types on salt precipitation and migration in CO2 injection process.
In this study, a pore-scale CO2 displacement experimental study was performed using a visualized microfluidic model. Dry CO2 was injected into homogeneous and heterogeneous microchips saturated with different simulated formation brine solutions (NaCl/CaCl2/NaCl-CaCl2) at a set flow rate. Then, the two-phase flow, water evaporation, salt growth, crystallization and migration processes in the pore scale were observed under brightfield imaging using advanced polarizing microscope and X-ray microtomography imaging technology. Finally, fluorescence and transmission imaging techniques were used to clarify the distribution of salt precipitation and to quantify the amount of salt crystal.
The results indicated that the brine after CO2 flooding formed four types of irreducible water, which are liquid bridges, domes, connected liquid pools and independent liquid pools. With the increase of CO2 displacement volume, cubic regular crystals and irregular microcrystals formed inside the chip saturated with NaCl solution, which is consistent with the existing literature research. However, in our study, we also observed a new form of salt precipitation—salt bridge aggregates. Compared with the above two salt precipitation forms, salt bridge aggregates are more likely to block the pore structure, thereby affecting the permeability of the near-wellbore area. In contrast to the chip of saturated with NaCl solution, the chip saturated with CaCl2 solution did not observe an obvious solid-phase crystal structure. However, we observed an unprecedented phenomenon—the thickness of the water film was significantly reduced, and finally viscoelastic water film salt and aggregates were formed. In addition, the results of fluorescence quantification of salt crystals also observed the self-enhancement effect of salt crystal growth and the water film salt transport effect, which synergistically strengthened the precipitation rate and amount. This study comparatively analyzes the influence of brine type on salt precipitation, which provides new insights for in-depth understanding of the effect of salt precipitation on CO2 injection capacity.
We provide new insights into the dynamics of pore-scale salt precipitation through visualized microfluidic experiments and identify possible explanations for the large-scale salt precipitation observed in situ. In addition, the salt precipitation mechanism and migration characteristics of different brine types may provide new suggestions for future numerical simulation research, and provide criteria for accurately predicting the distribution of salt precipitation and its impact on reservoir physical properties.

Speaker: BO WANG (University of Regina)

16:05 Machine Learning Model for Predicting Mineralogy and Pores Using Scanning Electron Microscopy Images of Danish Geothermal Reservoirs

In this paper, we have developed an Automated Prediction Model able to distinguish between rock grains and secondary deposition material to properly qualify the volumetric capabilities of the Geothermal reservoirs of Denmark. The proposed method uses three types of Scanning Electron Microscopy (SEM) Images of Back-Scatter Electron (BSE), Cathode-Luminescence (CL), and Mineral-Map (MM) to automatically evaluate the quality of Geothermal reservoirs by identifying pore space, original quartz, overgrowth, and other minerals. (SEM-CL) is widely used by geoscientists to reveal chronologic and physical relations in quartz facilitating differentiation between multiple stages of hydrothermal alteration (or mineralization).

After an initial exploration phase, we soon realized that the BSE Images could easily be used to predict three aspects of the problem: 1) the pore space, 2) the “other” category, and 3) quartz (both original and overgrowth in one category). The machine learning model used is the U-net model (Ronneberger et al., 2015). The dataset was normalized and split into an 80% training set and a 20% test set. The number of classes is four (0, 1, 2, 3), where the classes correspond to the desired categories. The U-net is built using the Keras library. Our U-net architecture is divided into encoder and decoder blocks, with the encoder consisting of 2D convolutions, max pooling, and batch normalization, and the decoder block consisting of 2D convolutional transpose layers. Since the dataset contains four labels, “SoftMax” activation was selected. We found that the “Adam optimization algorithm” with a batch size of 2 provided the best results.

The training of the U-net was performed on cropped BSE and CL images of size 512 x 512 used as input and the corresponding merged classification mask. Fig.1 shows three examples of test samples and the corresponding true and predicted masks. As the final U-net makes predictions on 512 x 512-sized patches, the full prediction for 1024 x 768-sized images requires an integration of multiple patches. This integration is performed by smoothing overlapping windows. This latter operation is computationally heavy but produces high-quality predictions. Fig. 2 shows a full-resolution test sample using unaligned versions of the BSE and CL images as input. The high quality of this result is preserved, even though the U-net was trained using only aligned images and masks. The relative area of the four categories (quartz, overgrowth, other minerals, and pores) is calculated based on these full-resolution results.

The proposed model will help improve and accurately estimate reservoirs' mineralogy and porosity, enabling the decision makers better to quantify the business case of Geothermal Plant Development. This can be accelerated through the automation of (SEM) Images for diagenetic modelling of Quartz Overgrowth. The quartz overgrowth provides information about the temperature and pressure history of the sample. Thus, if a sample has a lot of quartz overgrowth, then the surrounding volume likely diminishes its pore space. A combination of the porosity and the overgrowth may provide deeper insight. This paper will benefit the personnel who want to speed up the analysis of (SEM) images for reservoir quality measurements.

Speaker: Saurav Bhattacharjee (Dibrugarh University)

16:05 Mechanical analysis of gas diffusion layers for PEMFCs based on orthogonal design method

The Gas Diffusion Layer (GDL) is a critical component that ensures the efficient operation of proton exchange membrane fuel cells, capable of accommodating deformations and pressure differences between cell components. This study proposes a combined method of finite element and stochasticlly reconstruction method for GDL, calculating the stress and stress uniformity inside GDL microstructure under different compression ratios. Finally, an optimization analysis is conducted using orthogonal design method, and new stress prediction expressions are proposed. The results indicates that, fiber diameter and porosity are more sensitive. The new developped expressions are validated, which can predict and optimize the combined effects of different microstructure parameters on mechanical performance accurately. The results of this study provide predictions and guidance for designing low-stress and high-performance GDL.

Speaker: yushuai sun (宁波大学)

16:05 METHODOLOGY FOR MODELING RESERVOIR OIL VISCOSITY

In recent years, heavy oil production has gained more weight in the structure of total oil production in the world. This process is due to the fact that light oil reserves are being depleted. Current residual reserves of light oil of low and medium viscosity are 5 times lower than reserves of high-viscosity heavy oil. Therefore, quite a lot of attention is paid to the development of the latter.
Assessing production capabilities and effectively developing oil reserves requires an understanding of changes in fluid properties. Oil viscosity has a significant impact on oil recovery when developing hard-to-recover reserves. For oil deposits for a number of objects, the density, viscosity, content of asphalt-resinous substances, paraffin and sulfur increase as the depth of the formation increases, i.e. from the arch to the wings and from the roof to the sole. Sometimes inactive petroleum substances form a monolithic layer at the bottom of the deposit, which completely or partially seals the deposit, isolating it from the aquifer zone. Often the density of oil above the insulating layer is almost constant.
The paper examines the main reasons for the occurrence of high-viscosity oils, predicting dynamic viscosity based on data from more than 800 wells and distribution in a three-dimensional geological model. The influence of redox reactions is described, the hydrogeological component and chemical composition of the underlying waters are considered. The processes that contribute to the hydrophobization of reservoirs are considered, and an analysis of the change in viscosity over the area is carried out using the construction of a three-dimensional geological model and along the section. When analyzing changes in dynamic viscosity along the section and accumulated correlation coefficients for electrical resistivity and water saturation coefficient, zones of extreme saturation, the level of the clean water table were identified and described, the level of paleocontact location (oil-water) and the boundaries of hydrocarbon migration cycles were identified.
Highly viscous hydrocarbons are associated with the processes of anaerobic oxidation of oil and dissolution of reservoir rocks. The intensity of these reactions is maximum at the level of contact with water (on the surface of the clean water surface) and decreases upward towards the roof of the deposit as water penetrates and rises above the contact surface. During the study of the field, a number of authors noted that the reservoirs in the field are predominantly hydrophobic. And in the process of dissolution of the reservoir in contact with water, the rocks become hydrophilic and formation waters penetrate higher and higher up the section, reacting with other hydrophobic reservoirs. The rise of water up the section is also facilitated by the capillary effect, which results in a transition zone between oil and water.
The work was carried out using the example of one of the fields in the Komi Republic, which is characterized by the presence of highly viscous oil and a complex geological structure.
The reported study was partially supported by the Government of Perm Krai, research project No. СЭД-26-08-08-30 from 24.01.2024.

Speaker: Denis Potekhin

16:05 Mineral analysis and sweet spot identification of oil shale based on various rock imaging and image analysis techniques

In this study, a variety of advanced imaging techniques, including scanning electron microscopy, focused ion beam microscopy, micro-CT, and cryogenic electron microscopy, were employed. These techniques were combined with multiscale digital rock visualization technology and quantitative analysis algorithms to conduct a microscopic reservoir evaluation of oil shale cores. The evaluation encompassed various aspects such as mineral composition, pore structure, and organic matter characteristics, aiming to investigate the influence of minerals on the identification of sweet spots in oil shale, as well as the relationship between minerals mechanical properties and reservoir properties.
The results of the microscopic reservoir evaluation indicate that the oil shale reservoir in the study area exhibits a dual porosity media feature with pores and fractures. A comparison between the samples from wells MY2 and MY1H shows that the former exhibits higher overall porosity, larger pore radius, and a higher content of organic matter, consequently displaying better oil saturation and superior reservoir properties. The study on the relationship between minerals and reservoir properties and mechanical properties indicates a positive correlation between dolomite content and reservoir properties. Moreover, intervals with the coexistence of quartz and dolomite exhibit higher porosity, measured permeability, and oil saturation. The correlation between plagioclase content and reservoir properties is relatively weak, but there is a positive correlation between plagioclase content and fracture density. Plagioclase-rich intervals demonstrate lower fracturing pressure, facilitating the formation of fractures. The mechanical characteristics, such as tensile strength and brittleness, make plagoclase more prone to fracture extension. Therefore, intervals with high dolomite content can be considered as favorable geological sweet spots, while high plagioclase content can serve as an identification indicator for engineering sweet spots.
The findings of this study provide experimental evidence for the identification of geological and engineering sweet spots, thereby contributing significant practical value to the systematic evaluation of shale oil reservoirs. Moreover, the utilization of multiscale digital rock visualization technology and quantitative analysis algorithms offers new perspectives and approaches for the study of shale oil reservoirs.

Speaker: Dr Chenhui Wang (Research institute of petroleum exploration and development)

16:05 Multi-scale flow, permeability, and heat transport in building materials

Permeability and heat transport through building materials ultimately dictates their insulatory performance over a buildings service lifetime. However, characterisation of building materials is challenging because porous building materials are heterogeneous and their macroscopic physical properties (e.g. permeability, thermal, and mechanical) depend on their micro scale characteristics, i.e. the local distribution and features of the solid components and the connectivity of the spaces between them. Large-scale testing can measure these macro-scale properties, but often does not give insight into the underlying micro structural properties that ultimately leads to optimisation. Thus, a knowledge of the 3D structure is therefore required to assist in the development and implementation process for new materials. Experiments combining X-ray microtomography with numerical modelling are an accepted method of studying pore scale processes and have been used extensively in the oil and gas industry to study highly complex reservoir rocks. However, despite the obvious similarities in structure and application, these techniques have not yet been widely adopted by the building and construction industry.

We have investigated the pore structure of several building materials, both conventional and historic using X-ray tomography and direct numerical simulation. Five samples were imaged at between a 4- and 15-micron resolution inside a micro-CT scanner. The porosity and connectivity were extracted with the grain, throat, and pore size distributions using image analysis. The permeability, velocity, and thermal conductivity were then investigated using GeoChemFoam, our highly versatile and open- source numerical solver. We found that each material had a unique, heterogeneous, and sometimes multi-scale structure that had a large impact on the permeability and thermal conductivity [Figure 1]. Furthermore, we found that the method of including sub resolution porosity directly affected these bulk property calculations for both parameters, especially in the materials with high structural heterogeneity. This is the first multi-scale study of structure, flow and heat transport on building materials and this workflow could easily be adapted to understand and improve designs in other industries that use porous materials such as fuel cells and batteries technology, lightweight materials and insulation, and semiconductors.

Figure 1: The local heat flux (J) through Bentheimer building stone (left) and a historic brick (right).

Speaker: Hannah Menke (Heriot-Watt University)

16:05 Non-invasive imaging of solute redistribution below evaporating surfaces using 23Na-MRI

Evaporation from porous media is a key phenomenon in the terrestrial environment and is linked to accumulation of solutes at or near the evaporative surface. It eventually leads to salinization, soil degradation and weathering of building materials, topics with high economic impacts. Although the detrimental effects manifest on different scales from pores to the field, the key to understanding is found on the pore scale since pore system connectivity and structure control the solution behavior near the evaporation surface. A thorough understanding requires the development of physical models describing the most relevant processes and their validation by experiments. Vice versa, new experimental observations promote the further development of the physical models.
In this context, the current study aims at the understanding of solute accumulation near evaporating surfaces for model porous media at the cm-scale. Analytical and numerical modelling predict the development of local instabilities due to density differences during evaporation in case of saturated porous media with high permeability, which eventually causes density-driven backflow through fingering [Bringedal et al. TPM 2022]. To experimentally investigate this process, we performed experiments on sand packings with a diameter of 3.1 cm and a height of 4 cm prepared with two types of porous media: F36 (medium sand) and W3 (fine sand/silt) with porosities of 0.37 and 0.39, respectively. The intrinsic permeability of the two packings differed by two orders of magnitude, i.e. 2.9×10-11 m2 for F36 and 5.6×10-13 m2 for W3. Using magnetic resonance imaging (23Na-MRI), we monitored the development of solute accumulation and subsequent backflow with high spatial (1 mm) and temporal (1 hr) resolution during evaporation with a continuous supply of water at the bottom of the samples (wicking conditions).
Significant differences between the 23Na enrichment patterns were observed for the two types of sand. F36 sand produced an initial enrichment at the surface within the first hour, but soon after a downwards moving plume developed, hence redistributing NaCl back into the column. This was attributed to density driven backflow made possible by the high permeability. The backflow caused a good mixing of the solute during the observation period of 120 h. 1D concentration profiles with depth obtained from the 3D imaging showed that the average concentration reached only 2.5 mol/L, well below the solubility limit of 6.13 mol/L. In contrast, for fine W3 sand with lower permeability, enrichment only took place in a shallow near-surface zone of a few mm with a maximum concentration of 5.1 mol/L after 73 hours of evaporation. No fingering occurred although the mean evaporation rate was similar to that of the F36 sand. These results highlight the major role that porous media properties play in solute redistribution near evaporating surfaces, which was predicted by theory and now confirmed experimentally. The findings encourage further investigations involving different porous media with systematic variation of hydrological properties and the coupling of experimental results to numerical modelling.

Speaker: Mohammad Ali Chaudhry

16:05 Physics for freezing temperature depression of solution in porous media

Water ubiquitously exists with dissolved salt in both natural and engineered porous media such as soil, rock, concrete, and tissue, therefore its freezing temperature depression behavior is of particular interest to various scientific communities tackling with mechanics and physics of porous media. We devised a series of experiments on the freezing solution in glass tubes with varying tube diameters, water volumes, water-solid interfacial areas, cooling rates, ion concentrations, and ion types. The results reveal two main findings: (a) both the freezing temperature depression of pore water and pore solution are governed by the heterogeneous ice nucleation (HIN) at the water-solid interface, as evidenced by the observation that the freezing temperature decreases with decreasing solid-liquid interfacial areas, regardless of pore diameter and pore solution volume; (b) the dissolved salts alter HIN processes via changing the osmotic potential across the ice embryo-liquid water interface, as indicated by the observation that the freezing temperature is mainly determined by the salt concentration irrespective of salt types. Furthermore, the classical nucleation theory model is adapted for the freezing behavior of pore solution by including an osmotic potential term. The model shows excellent performance in capturing experimental data with various pore solution concentrations, further substantiating the HIN as the physical mechanism governing pore solution freezing.

Speaker: Ningning Zhao

16:05 Pore-Scale Insights into Freshwater Displacement Dynamics in Brine-Saturated Berea Sandstone Using 4D Microtomography

In recent years, oil and gas companies operating in regions with high-salinity reservoirs have shown a growing interest in the processes occurring at the pore scale during the displacement of brine with freshwater. This interest is driven by the potential for freshwater injection to alter the physicochemical properties of the rock-fluid system within the pore spaces of the reservoir, thereby improving oil recovery. Such alterations can lead to changes in surface tension between oil and water, enhancing the mobility of oil within the porous medium and consequently increasing its extraction. Additionally, the interaction between the fluid and the rock matrix can affect the wettability of the rock; a transition towards more hydrophilic conditions could facilitate the easier displacement of oil by water. This study employs 4D microtomography to experimentally investigate brine displacement by freshwater in Berea sandstone at the pore scale under reservoir conditions using an X-ray transparent Hassler core holder. The in-situ visualization allowed for the mapping of salt concentration distribution within the fluid during displacement, capturing the main front of concentration drop within the pore space of the sample. These observations were corroborated by breakthrough moment determination based on the measurement of electrical resistance at the sample's output. The findings provide direct insights into fluid mixing in complex porous media, offering both data and validation for pore-scale process modeling.

Acknowledgements
This work was funded by the subsidy allocated to Kazan Federal University for the state assignment in the sphere of scientific activities, project № FZSM-2023-0014.

Speaker: Rail Kadyrov (Kazan Federal University)

16:05 Pore-scale Study of the Influence of Pore Heterogeneity on Non-miscible CO2 Displacing Oil

CO2 Enhanced Oil Recovery (CO2-EOR) is a green and promising technology that not only improves crude oil recovery but also reduces carbon emissions. The micro-pore structure of porous reservoirs significantly influences the effectiveness of CO2-EOR, making research in this area crucial. This study aims at the influence of pore heterogeneity on the non-miscible CO2 displacement and employs a coupled approach utilizing the N-S equations and phase-field method to numerically simulate the microscale two-phase flow of CO2-oil displacement within porous media. The impact of pore heterogeneity on the shape and stability of the CO2-oil displacement front, residual oil types, and spatial distribution are investigated under different capillary numbers. The study elucidates the mechanisms through which heterogeneity affects the non-miscible displacement process of CO2. The results indicate that, under conditions of neutral wettability (θ=π/2) and low capillary numbers (logCa=-6.253), the increased pore heterogeneity in porous media leads to a more unstable displacement front. The overall recovery increases with an increase in capillary numbers in the model with weak heterogeneity (σ=0.004). However, the presence of dominant channels leads to a decrease in the oil recovery with the increasing capillary numbers in the models with stronger heterogeneity (σ=0.008 and σ=0.012). With the pore heterogeneity increasing, the influence of capillary numbers on the displacement front, the quantity and spatial distribution of various residual oils, and breakthrough time become less pronounced. This research provides valuable insights into the mechanisms governing the impact of pore heterogeneity on the non-miscible displacement process of CO2-oil under different wettability and capillary number conditions for CO2-EOR.

Speaker: Mr Minfeng Li (China University of Petroleum (East China))

16:05 Prediction model of permeability in porous media with different arrangements

Abstract:
Permeability is a measure of flow resistance in porous media. As an important characterization parameter of porous media flow capacity, it is widely used in oil/gas development, filtration analysis, groundwater transport, hydrocarbon recovery and so on. However, on the one hand, the permeability was considered a monodrome function of porosity by many researchers in their studies [1~3]. On the other hand, its determination for different types of porous media is challenging due to its complex dependence on the pore-scale structure of porous media [4], which always includes fractures caused by hydraulic fracturing and geological factors.
We first established an absolute permeability computational method to determine the actual relation between permeability and other pore-throat parameters. The method is based on the Darcy equation and Lattice Boltzmann method (LBM). Then we calculated the permeability for porous media with different pore-throat parameters. A modification to the Kozeny-Carman equation was made by considering the effects of pore-throat ratio and coordination number. Finally, we studied the impact of fracture and arrangement. The compound porous media (CPM) with different initial porous media (IPM) structures and arrangements, such as series connection and parallel connection, were constructed and the compound permeabilities were calculated. According to the electric resistance network analogy [5], the relationship between the compound permeability and the permeabilities of IPM was established mathematically.
Using the LBM, our revised permeability calculation method matched well with the theoretical prediction compared to the classical Kozeny-Carman equation. In low-permeability tight reservoirs or shale reservoirs, fracture contributes more to fluid transport rather than matrix, which was confirmed by its higher permeability. Besides, our calculation results revealed that the arrangement, while directly affecting the compound permeability, will further affect the compound permeability by changing the tortuosity. This effect through tortuosity is more pronounced in CPM with series connection.

---

Key words: Permeability, Lattice Boltzmann method, Kozeny-Carman equation, Porous media arrangement

Speaker: Dr Yang Zhang (China University of Petroleum (East China))

16:05 Preparation of municipal solid waste incineration (MSWI) fly ash-based self-foaming materials and feasibility study on goaf filling

As a toxic solid waste, the treatment and placement of MSWI fly ash has become a hot topic in society. It was found that the residual aluminum in MSWI fly ash reacted with the alkaline activator to generate hydrogen, which made the material present a pore structure without using the foaming agent. Using MSWI fly ash and coal gangue powder as the main raw materials, geopolymer foam materials with different ratios were prepared after alkali excitation. The effects of curing temperature, activator dosage and MSWI fly ash content on the compressive strength, fluidity, heavy metal leaching concentration, phase composition and pore structure of filling materials were studied. The feasibility of the application of alkali-activated MSWI fly ash-based spontaneous foam material in the filling work of mine goaf was explored. The results showed that when the curing temperature increased from 20°C to 40°C, the 28d compressive strength of the material increased by about 24.2 %. The increase of curing temperature can significantly improve the degree of polymerization and the solidification rate of heavy metals, so that more polymerization products were generated in the system and the conversion of calcium silicate hydrate (C-S-H) to calcium aluminosilicate hydrate (C-A-S-H) with higher degree of polymerization is promoted. At the same time, the curing temperature will also affect the pore structure of the material. The higher the temperature, the larger the porosity of the material, and the smaller the complexity of the spatial distribution of pores.
Keywords: MSWI fly ash; Self-foaming filling materials; Filling body; Curing temperature; Pore structure

Speaker: 国胜 付 (深圳大学土木与交通工程学院)

16:05 Simulation of multiphase porous media flow in acid stimulation formations with an adaptive mesh refinement strategy

In our previous work, we investigated the fingering behavior in acid stimulation formations and found that the dissolution patterns in acid stimulation region have an influence on the injection performance. A detailed characterization of the highly heterogeneous wormholes could introduce a large number of gridblocks and subsequently increase the computational burden drastically. In this work, an adaptive mesh refinement strategy is proposed for a computationally efficient simulation of multiphase porous media flow in acid stimulation formations. As a preprocessing step, we construct multiple tiers of grids containing the heterogeneous features in the vicinity of the wellbore and ascertain their topology. The saturation is taken as a criteria during simulation to switch the grids locally. When the saturation of the injected phase is lower than a threshold value, a fine grid is used to capture the fingering behavior. When the value is surpassed, a coarse grid is used instead. With respect to the switch, the upscaling is achieved using a volume weighted approach, while the downscaling is achieved using a basis function interpolation method. A number of scenarios are used to evaluate the technique, and the results demonstrate its feasibility, strong computational performance, and accuracy.

Speaker: Dr Longlong Li (Institute of Mechanics, Chinese Academy of Sciences)

16:05 Stages of change in the permeability of the chalk core during the injection of produced water and seawater

Chalk reservoirs, because of their high porosity and very low permeability, represent one of the most interesting cases for carbonate engineering studies. They exhibit complex fluid-rock interactions due to their reactive surfaces and tight porous environment. Re-injection of co-produced water is an attractive strategy for managing the wastewater stream from oil wells, however, the reactive nature of carbonates and the permeability presents challenges with permeability loss. Identifying the stages and understanding the processes that occur during the reinjection of produced water into a well is necessary for planning correct technological operations to increase the permeability of the formation and the feasibility of these operations. This study examines the stages of permeability change during the re-injection of produced water and seawater from the Danish North Sea oil and gas fields. Using computed tomography, real core samples from the chalk formations were selected to be homogeneous without any open fractures. All experiments were carried out in a core flooding system simulating well conditions with respect to pressure and temperature. Produced water samples were taken from the Dan field to replicate the chemical and thermodynamic processes occurring in a real well as accurately as possible. As a result of the core flooding experiments, 3 stages of core permeability changes were identified (permeability increase, pressure stabilization, and permeability decrease). The processes occurring at each stage of the change in permeability were explained based on the data of the chemical composition of produced water from an ion chromatography-mass spectrometry, image analysis from a scanning electron microscope, measurement of particles size by a zetameter, as well as building a thermodynamic model of scale formation in ScaleCERE software.
These experiments provide new data for the process of changing the permeability of oil fields consisting of chalk reservoirs and additional evidence for existing theories.

Speaker: Mr Maksim Kurbasov (Danish Offshore Technology Centre, Technical University of Denmark)

16:05 Study on the CO2 miscible flow in shale nonopores

Field practice has proved that CO2 huff and puff under miscible conditions is an effective means to improve shale oil recovery. However, the widespread distribution of nanoscale pores in shale makes the transport law of CO2-alkenes different from that of conventional reservoirs. The differences in surface properties of different minerals will have different effects on fluid phase state and transport. The study on the transport of alkane-CO2 in shale nanopores is urgently needed. In this thesis, the flow laws of CO2 miscible flow in in typical organic matter of kerogen and inorganic calcite nanopores were studied by molecular simulation. The effects of mineral composition, pore size, CO2 concentration, temperature and pressure on the miscible flow were analyzed. Negative slip exists in both kerogen and calcite pores, and calcite pores are more significant. This indicates that it is necessary to distinguish between organic matter and non-mechanistic pores in the upscale calculation. Therefore, the characterization models of slip lengths in pores of kerogen and calcite were constructed. This study provides a better understanding of CO2 miscible flow in shale nanopores, and the construction of corresponding characterization models for scale upgrading calculation can not only provide technical support for shale oil development, but also help to improve the understanding of the phase behavior and transport mechanism under the micro-scale effect.

Speaker: xiangdong xing

16:05 Study the mechanism of supercritical CO2 huff-n-puff on enhancing shale oil recovery

Depletion recovery in shale reservoirs after fracturing suffers from a rapid decline in production and low recovery. The CO2 huff-n-puff oil production technology can effectively supplement formation energy, reduce oil-gas interfacial tension and crude oil viscosity, and improve the production of a single well. This technology has good application prospect in enhanced oil recovery of shale oil. Currently, researches on enhancing shale oil reservoir recovery by CO2 huff-n-puff primarily focus on the effects of field production parameters on recovery. However, there is limited research on the production characteristics of the degree of crude oil utilization and the effective range of CO2 under different pore sizes.
Supercritical CO2 huff-n-puff experiments were conducted to investigate the mechanism of CO2 huff-n-puff for enhanced recovery in shale reservoirs. The T2 and one-dimensional frequency coding maps before and after the huff-n-puff experiments were obtained by using nuclear magnetic resonance (NMR) technology, and the oil recovery, utilization range and porosity characteristics of shale cores were analyzed at different core permeability, huff-n-puff cycles and soaking time. A typical shale reservoir has been used to develop a mechanism model for a single well at the field scale, simulating CO2 huff-n-puff and water-CO2 alternating huff-n-puff at the field scale, studying CO2 diffusion in the reservoir, and investigating the effect of production capacity under different production parameters.
The results show that the CO2 injection volume has the most obvious effect on the CO2 huff-n-puff cumulative oil production, and the injection rate has less effect on the huff-n-puff effect under the optimal gas injection volume. By lengthening the soaking time, the distance of the injected CO2 effect from the proximal to the end of the core increased, the utilization of small pores increased significantly and there was an optimal soaking time. The increase in huff-n-puff cycles led to improved utilization of crude oil in the first half of the core, as well as increased utilization of medium and large pores, resulting in a production increase of approximately 74%. Due to capillary force, the recovery and CO2 diffusion effects near the borehole are better with supercritical water-CO2 alternating huff-n-puff than with CO2 huff-n-puff. However, water injection may drive some of the oil away from the borehole, resulting in an overall recovery effect that is not as good as that of CO2 huff-n-puff. Therefore, it is recommended to use CO2 huff-n-puff for new wells and water-CO2 alternating huff-n-puff for old wells with poor recovery. This study can serve as a reference for developing a reasonable technology plan for CO2 huff-n-puff in shale reservoirs.

Speaker: Wenxiang Ge (School of Petroleum Engineering, China University of Petroleum (East China), China)

16:05 The Competitive Adsorption Behavior of CH4/CO2/H2S Mixtures in Kerogen Nanopores from the Perspective of Molecular Simulation

Objectives/Scope:
Nowadays, the escalating greenhouse effect is primarily attributed to the excessive emissions of CO2. Geologic sequestration of CO2 and the utilization of CO2 in displacing shale gas during gas production process could be benefit for mitigating CO2 levels. The presence of H2S gas in CO2 waste emissions often poses a challenge due to the potential cost escalation associated with its purification. In response to this, the concept of CO2/H2S co-sequestration has been proposed, with successful implementation cases reported. However, the application of CO2/H2S displacement in shale gas extraction has yet to be verified. In this work, we used the Grand Canonical Monte Carlo (GCMC) method to simulate the adsorption of different components (CH4, CO2, H2S in single-phase, CH4:H2S=1:1 in two phases, and CH4:CO2:H2S=5:4:1 in three phases) within kerogen at 373.15K under various pressures. The study investigated the adsorption density, adsorption capacity, and competitive selectivity adsorption coefficients of different components on the kerogen surface. Our works could reveal the adsorption patterns of CH4/CO2/H2S in kerogen pores, providing a theoretical foundation for the injection and extraction of shale gas with CO2/H2S.
Methods/Procedures/Process:
Adsorption behavior in ~5nm kerogen nanopores with different components systems is investigated at 373.15K and a series of pressures. The CVFF, TraPPE-EH, TraPPE-UA, and three-point potential models are used to describe the kerogen nanopores, CO2, CH4, and H2S, respectively. All the GCMC simulations are completed by the MCCCS Towhee software. In the μVT ensemble, 5000000 steps per fluid molecule are carried out to achieve equilibrium, and 10000000 steps per fluid molecule are conducted for sampling. Based on statistical data, we calculated the accessible volume, adsorption density, adsorption capacity, and competitive selectivity adsorption coefficients.
Results/Observations/Conclusions:
It was observed that CO2 effectively reduces the adsorption of CH4, but the introduction of H2S significantly decreases the adsorption density of CO2, while the adsorption density of CH4 remains essentially unchanged. The isothermal adsorption curves reveal that the injection of both CO2 and CO2/H2S leads to a reduction of approximately 50% in the adsorption quantity of CH4, indicating effective shale gas extraction. In systems with the addition of H2S, the adsorption quantity of CO2 decreases by around 30% compared to systems with only CO2 injection. The competitive adsorption coefficients of CH4 relative to other components in different systems are all less than 1 and range between 0.2 and 0.4, suggesting a strong adsorption capacity of kerogen for both CO2 and CO2/H2S.
Applications/Significance/Novelty:
This work reveals the adsorption patterns of CH4/CO2/H2S in kerogen pores from a molecular perspective and provides crucial insights into the competitive adsorption patterns of CH4, H2S, and CO2, which is helpful to lay a theoretical foundation for the simultaneous injection and extraction of shale gas with CO2/H2S.

Speaker: Junyao Bao (Chengdu University of Technology)

MS13_577_Junyao Bao.pdf

16:05 Thermo-hydro-mechanical coupled zero-thickness interface finite elements: benchmarking and application

Coupled thermo-hydro-mechanical (THM) processes play a key role in subsurface use, e.g. geothermal energy, CO2/H2 storage and geological repository. However, understanding these processes in porous media, in which natural fractures can be present and new fractures can be induced, is non-trivial task. The Cohesive Zone Model (CZM), a numerical technique in the framework of the Finite Element Method (FEM), is one of the possible choices in modelling fracture initiation and propagation due to its simple physical meaning and its mitigation of the need to calculate the stress singularity at the fracture tips that is commonly challenging in methods based on classical linear elastic fracture mechanics. In this work, we developed a THM coupled zero-thickness interface finite element employing CZM. It is developed to allow the simulation of longitudinal and transversal fluid/heat flow inside the fracture. The cubic law is used to simulate the fracture transmissivity as a function of its aperture, while an elasto-damage law is used to characterise the mechanical response of the discontinuity. The method is successfully verified against two analytical solutions: one of the coupled thermo-hydraulic response of a single fracture, and the KGD fracturing model that describes fracture propagation considering hydro-mechanical coupling. An example is then implemented to show how to simulate thermal fracturing without pre-defined fracture direction using the developed interface elements, and sensitivity analysis is performed against the injection rate and fracture energy.

Speaker: wen luo

16:05 Transport and Detachment Characterization of Nanoparticle-Laden Oil Droplet in Pore-Throat Channel

To enhance the applications of nanoparticles (NPs) in enhancing oil recovery, a crucial aspect is gaining a comprehensive understanding of the transport and detachment mechanisms of oil droplets through a pore throat. A novel, hybrid pore-scale simulation method is proposed, utilizing a combination of Lattice-Boltzmann (LB) and Langevin-Dynamics (LD) approaches to investigate the transport and detachment mechanisms of a nanoparticle-laden oil droplet. The LD method is specifically developed to capture the intricacies of Brownian motion, thermal fluctuation-dissipation, multi-body hydrodynamics, and particle-particle interactions. The discrete LB forcing source distribution is integrated with LD, enabling a comprehensive evaluation of random forces, friction forces, van der Waals forces, and electrostatic forces involved in the transport and detachment of nanoparticle-laden oil droplet in a narrow microchannel. The variation in pressure difference is observed when the oil droplet transport in a narrow channel. And the nanoparticle-laden oil droplet when transporting in the channel shows a less pressure difference compared with oil droplet without NPs adsorbed on. Moreover, with some NPs attached on the channel, there is little oil trapped on the channel. The oil droplet detaches from the channel with the help of NPs. Results demonstrate that oil droplet detachment from a surface is not related with surface wettability and the adsorbed area of NPs is critical in detachment process. The outcomes of this work provide valuable insight into the critical importance of nanoparticles effects on the detachment and transport of oil droplet in porous media.

Speaker: Yue Li

16:05 Unlocking the secrets of unconventional shale: A multi-scale approach to understanding fluid transport and resource recovery

Understanding the intricate pore structure of shale rocks across scales, from nanometres to micrometres, is crucial for optimizing the recovery of natural gas, geothermal energy, and potentially enabling future CO2 sequestration and subsurface hydrogen storage. This study leverages Small Angle Neutron Scattering (SANS), a non-destructive technique, to precisely characterize pore properties in Australian shale samples. By employing contrast matching experiments, we probe the accessibility of these pores to deuterated methane (CD4).
Our in-situ SANS experiments, conducted on carefully chosen shale samples with diverse thermal maturities and organic carbon contents, reveal how stress and fluid pressure influence the overall pore structure. Notably, we observed that:
• Nanopore gas confinement exhibits sample-specific behaviour.
• Applying pressure to methane (CD4) at 500 bar induces condensation within accessible nanopores (diameter < 10 nm), resulting in the scattering length density (SLD) of confined methane exceeding that of the shale matrix by more than twice.
• Uniaxial stress, mimicking hydraulic fracturing pressure, enlarges some smaller pores and potentially even forms larger ones through coalescence, while expelling confined methane.
These findings provide valuable input for advanced modelling and simulations, enabling us to bridge the gap between submillimeter-scale laboratory data and reservoir-scale behaviours. This paves the way for optimizing resource extraction and developing novel strategies for geological storage of critical elements.

Speaker: Yeping Ji (CSIRO)

16:05 Visualization of the diffusion characteristics of surfactants in porous media

The behavior of surfactants and nanofluids in the porous media of reservoirs is a topic of great interest in the Petroleum sector. The parameters of diffusion are primarily determined through research using free diffusion experiments, yet the true nature of diffusion and its parameters remain unclear. Few studies have visualized diffusion in porous media.
Utilizing Nuclear Magnetic Resonance Imaging (NMRI) technology, the signal-blocking effect of heavy water on nuclear magnetic resonance was employed to introduce surfactants, with pure water serving as the probe. This allowed the visualization of the diffusion characteristics of surfactants within the porous media. Experiments were conducted to visualize surfactant diffusion in core samples with varying permeabilities, and the effects of surfactant concentration and environmental temperature were examined.
The experimental results revealed a close correlation between the diffusion velocity of surfactants and factors such as core permeability, surfactant concentration, and temperature. Through nuclear magnetic resonance imaging, the surfactant's diffusion process within the core was observed, providing valuable insights for further research.
The results show that the maximum diffusion velocity increases from 2.6 mm/h to 4.5 mm/h as the concentration increases from 0.5% to 1% at 2100mD and 30°C. The diffusion velocity of all experiments showed a decreasing trend with time, with a rapid decrease at the beginning and a gradual slowdown after that. Increasing the temperature, surfactant concentration, and high permeability are all conducive to the diffusion of surfactants, and the diffusion rate gradually decreases with time, so there is a marginal effect on the diffusion time.

Speaker: Yuhua Li (上海大学)

16:05 Visualization study on the growth and occurrence patterns of CO2-SO2 mixed hydrates in porous media

Sealing carbon dioxide (CO2) in marine sediments in the form of hydrates presents a promising approach for mitigating greenhouse gas pollution. The captured CO2 often includes other impurity gases, such as nitrogen (N2) and sulfur dioxide (SO2). It is well-established that the release of SO2 carries adverse effects on both human health and the environment. Currently, various flue gas desulfurization methods have been developed, but few methods can simultaneously achieve flue gas desulfurization and decarbonization. Consequently, the co-injection of impurity gases with CO2 into deep-sea sediments and their utilization for hydrate storage has emerged as a promising approach. While extensive studies have explored the impact of N2 on CO2 hydrate storage, the understanding of how SO2 influences the utilization of hydrate storage for CO2 remains relatively limited. In this work, we used a 2.5D microfluidic chip to characterize the pore structure of sediments in the South China Sea. Visualization studies were conducted to examine the occurrence patterns and growth habits of CO2-SO2 mixed gas hydrates under specific hydrate zone conditions (P=9 MPa, T=284.15 K) in the South China Sea under stagnant conditions. The growth and occurrence patterns of mixed gas hydrates at the pore scale were analyzed, and quantitative Raman spectroscopy was employed to investigate changes in hydrate composition within the pore space.
The results indicate that under static conditions, the dissolution and diffusion of gas are influenced by the pore structure of porous media, leading to regional differences in dissolved gas. This discrepancy can result in density variations between fluids, inducing fluid convection. This convection can place the fluid in a slightly perturbed state, facilitating the nucleation and growth of hydrates. Hydrate growth initiates from the gas-liquid interface, the region with the most severe fluid disturbance, promoting hydrate nucleation. During the hydrate growth process, it was observed that hydrates preferentially grow along regions where aqueous solutions exist, occupying all pores containing solutions. After that, the hydrate film that penetrates the gas-liquid interface extends into the gas phase. Due to the hydrophilicity of porous media and the high solubility of CO2-SO2 gas mixtures, the occurrence mode of mixed hydrates in the aqueous phase is typically patchy, while in the gas phase, it manifests as a mixed mode of pore-filling and load-bearing. Disparities in substance composition of dissolved substances in porous media were identified, with natural hydrate formation tending to occur in areas with higher local SO2 concentrations. Given the easier formation of SO2 hydrates compared to CO2 hydrates, the accumulation of SO2 in the fluid promotes the nucleation of mixed gas hydrates, where SO2 plays a crucial role in hydrate nucleation sites. Moreover, as SO2 is a polar molecule, its enhanced hydrophilic properties significantly improve the stability of CO2 hydrates, allowing them to remain stable and grow outside the stable domain. These findings contribute to a better understanding of the occurrence and growth mechanism of CO2-SO2 mixed hydrates in sediment pores, demonstrating the potential application of using hydrates to seal CO2-SO2.

Speaker: Lifu Zhang

Wednesday, 15 May

09:25 → 10:55 Poster: Poster Session V

09:25 A Molecular Dynamics Simulation on Adsorption Process of Methane in Nanopore

The exploration and development of shale gas have received great attention in the world due to the large amount of reserves and successful technical progress in horizontal well drilling and massive hydraulic fracturing. However, the nanoscale pore structure with diverse shape and limited internal space presents a challenge for understanding the transport mechanism. When methane molecules are confined in nanopores, the adsorption process takes significant influence on shale gas transport and can no longer be neglected. Therefore, the equilibrium molecular dynamics (MD) simulation is performed on methane adsorption in nanopore to study the dynamics behaviors of methane under different temperature, pressure, specific surface area, pore size and adsorption layer thickness conditions. It has been found that the methane density and temperature show negative linear correlation . The methane adsorption capacity gradually increases with the increase of pressure and specific surface area, and the adsorption concentration in narrow pores is higher due to the superposition of adsorption layers . The thickness of adsorption layer has a significant impact on the adsorption behavior of methane. The continuous multiple layers may interact with each other, leading to increased gas absorption compared to that of single layer. The results provide a theoretical basis for studying gas transport through nanopores in shale matrix.

Speaker: Mr Qiuye Yuan (China Jiliang University)

09:25 A Theoretical Model for Thermal Conductivity of Fibrous Porous Media

Thermal conductivity is a fundamental physical property in porous media, and is critical to various industrial applications. Most existing theoretical models appeal to estimate thermal conductivity with isotropic assumption and the applicable conditions are relatively rigorous. This paper introduces a theoretical model that evaluates the thermal conductivity of fibrous porous media. The model is based on Fourier's Law and involves a complex thermal resistance circuit analysis, considering the direction of heat flux originating from the X, Y, and Z axes within the Cartesian coordinate system. The proposed model was found to be reasonable upon comparison with existing models. By comparing the effective thermal conductivity calculated by the model with results obtained from Computational Fluid Dynamics (CFD) and discrete numerical solution methods, the high accuracy of the model has been validated. The extension of the proposed model based on fractal theory was also discussed. It is anticipated that the proposed model will offer an alternative approach to computing the thermal conductivity and figuring out the mechanism of heat transfer behavior in fibrous porous media.

Speaker: Ran Yang

09:25 Application of gel particles in the regulation of oil-water permeability curve

In chemical oil drive technology, injecting polymers and surfactants is considered an effective method for adjusting the permeability of reservoir rocks, thereby influencing the flow characteristics of oil and water phases. While the effects of polymers and surfactants on the relative permeability of oil and water have been extensively studied, the impact of gel particles on the oil-water phase permeability curve remains under-researched. In this study, we intend to conduct a series of oil-water two-phase flow experiments under laboratory conditions, aiming to explore how different types, particle sizes, and concentrations of gel particles affect the phase permeability curves. Through these experiments, we aim to achieve an in-depth understanding of how the physicochemical properties of gel particles specifically influence the oil-water two-phase flow characteristics. We anticipate that the concentration and particle size of the gel particles will be key factors in determining the shape and location of the phase penetration curves. Additionally, numerical simulations will be utilized to model the reservoir-scale flow characteristics of gel particles and their potential impact on the oil-water phase infiltration curves, aiming to attain a more comprehensive understanding of how gel particles can enhance oil-water phase infiltration performance. The findings of this study hold significant importance in optimizing oilfield displacement. By rationally selecting the type, concentration, and particle size of gel particles, an effective enhancement in oilfield recovery is expected, thereby offering new perspectives for oilfield development.

Speaker: Dr Quanling Qin (China University of Petroleum (East China))

09:25 Computational and Topological Methods for In-situ Characterisation of Hetrogeneous Surface Wettability in Porous Media

The efficiency of nano- and micro-porous materials in absorbing and releasing fluids, like CO$_2$ in geo-storage or water and gas in fuel cells and electrolyzers, depends on their surface wettability. Measuring wettability accurately is complex due to varying dynamic forces, chemical diversity, and surface texture. In situ measurements, which could assess wettability as a local contact angle (the angle at which a denser phase like water meets a solid in the presence of another phase like hydrogen, air, or CO$_2$), face challenges in precisely determining fluid curvatures, contact points, and the loops formed by multiphase fluids. We introduce a new, advanced topological method for in situ contact angle measurement and conduct a comparative analysis of existing geometric and topological techniques, evaluating their precision on ideal surfaces, CO$_2$-containing porous rocks, and water in gas diffusion layers. This novel approach offers more accurate and reliable in situ measurements for uniformly wetting environments compared to past topological methods, whereas geometric methods excel in mixed-wetting areas. Additionally, this research includes a detailed open-source platform for in situ wettability assessment in porous materials, which has significant implications for gas geo-storage, fuel cells, electrolyzers, filtration, and catalysis.

Speaker: Dr Ying Da Wang (UNSW)

09:25 Determination of organic and inorganic oil volumes and permeabilities in shale

Shale oil and gas is an important unconventional resource, whose porous media is dense and composed with various minerals. Kerogen in shale reservoirs can adsorb and dissolve some hydrocarbon fluids, which results in the diversity of pore types and fluid occurrence states in shale reservoirs. The inner surface of pores in inorganic minerals in shale reservoirs is mostly water-wet, and the pore size is larger than that of organic pores, while the inner surface of organic pores is oil-wet and mostly nano-scale pores. Shale oil and gas have three occurrence states: the free fluid in the inorganic pores, the free fluid in the organic pores, the adsorbed and dissolved fluid in the miscible state on the surface of kerogen and in its interior. In this paper, according to the wettability and occurrence characteristics of different fluids in different pores, the inorganic porosity, organic porosity, miscible adsorption and absorption fluid saturation of different shale samples were determined by oil-gas-water fluid saturation experiment. Based on physical experiments, considering the physical parameters of inorganic and organic pores of shale, a mathematical model of shale oil reservoir seepage and storage performance was established to characterize the relationship between shale porosity, saturation, organic matter parameters (TOC, density, porosity) and inorganic matter parameters (content, density, porosity). According to the principle and method of physical experiment of shale oil and water imbibition, considering the characteristics of inorganic and organic pores’ interaction and cross-flow, the shale fluid imbibition mathematical model and finite difference solution method was established based on the dual medium model. By fitting the experimental results among imbibition of different fluids in shale samples, the inorganic pore permeability and organic permeability of different shale samples were obtained. Through parameter sensitivity analysis, the effects of unconventional pore-seepage parameters on the shale imbibition process were studied. This research provides a theoretical basis for the fine evaluation of shale oil and gas reserves and the analysis of reservoir physical property parameters.

Speaker: YAJUN LI (China University of Petroleum (Eash China))

09:25 Differences in Gas-Water Flow in Heterogeneous Layered Sandstone

The existence of bedding and an abundant interlayer in sandstone reservoirs severely hinders the exploration and extraction of sandstone gas reservoir resources. A layered heterogeneous sandstone core was prepared, which consisted of two permeability layers, and the permeability ratio between the high and low permeability layers was 1.6.
The gas injection and water flooding experiments with different injection parameters were carried out sequentially on the core in saturated water state, and increased the back pressure after the water flooding.The gas-water distribution of the core in different stages was scanned with the help of CT equipment, and the image data were obtained at a resolution of 4.51 μm. Qualitative and quantitative analysis of image data with the help of professional software to study the differences in gas-water flow in layered heterogeneous sandstone core.
The experimental data showed that, in the gas injection stage, when the gas injection rate was low, the gas preferentially entered the large pore space, and the gas saturation of the high permeability layer increased rapidly, and with the continuous improvement of the injection parameters, the gas overcame the capillary force to break through into the small pore space under the effect of the injection pressure, the low permeability layer began to have a significant increase, and finally the gas saturation of the whole core was 49.3%, the gas saturation of the high and low permeability layers was close to 2:1 under the influence of the heterogeneity.
In the water flooding stage, when the low injection parameter, the water didn't have enough energy to break through into the large pore space, but preferentially entered the small pore space under the effect of wettability; after increasing the injection parameter, the water began to displace the large pore space, and the gas saturation of the highly permeable layer decreased rapidly. In the displacement process, since the core was water-wet, a water film was formed preferentially after the water entered the pore space, and with the increasing volume of water injection, the water film gradually became thicker and eventually filled the whole pore space. After increasing the back pressure, residual gas formed by snap-off near narrow throats and a large amount of residual gas was stranded downstream in dead-end corners because of the lack of effective percolation channels. The whole core eventually achieved a gas recovery of 81.5%, with the gas recovery ratio of the high and low permeability layers close to 1.25:1.
This study provides fundamental knowledge to investigate the effect of heterogeneity on gas-water flow laws in sandstone, which may help to further enhance the gas reservoir recovery in heterogeneous sandstone.

Speaker: Weichen Sun

09:25 Direct numerical simulation of the two-phase flow in a pore network and comparative analysis with drainage/imbibition tests on glass micromodels

The experimental and numerical study of drainage and primary/secondary imbibition cycles of immiscible displacement are crucial for several practical applications such as the spreading of oil pollutants in soils and groundwater, the in-situ remediation by water flushing, and the enhanced oil recovery (EOR) from reservoir rocks. In order to simulate two-phase flow in pore networks, by now, most attention has been paid on mechanistic pore network models (PNM) and Lattice Boltzman (LB) approaches. The prediction of the two-phase flow pattern with direct numerical simulation, though computationally cumbersome, is a challenge. To address such a challenge, several numerical approaches are available, like the level set method, where issues such as maintaining a zero net mass balance equation remain unresolved [1]. In this context, a phase field approach [2] is used to model the immiscible displacement of two fluids within the pore network of a specific micromodel [3]. Central to this approach is the Cahn-Hilliard fourth-order partial differential equation, governing the dynamics of the chemical potential (G) and mobility (γ). These parameters are intrinsically linked to key physical factors such as interphase thickness (ε), capillary width, mixing energy (λ), and surface tension coefficient (σ), Eqs. (1)-(3)

(1)∂φ/∂t+u∇φ=∇γ∇G

(2)G=-λ[∇^2 φ+(φ(φ^2-1))/ε^2 ]

(3)σ=(2√2)/3 λ/ε
The pore network is reconstructed from an actual glass-etched micromodel, for which extensive experimental data are available for validation and comparative analysis. This reconstruction is based on the software developed by the OpenPNM team [4], and the resulting geometry is then integrated into the Comsol Multiphysics® commercial software for simulation. In the numerical model, the Cahn-Hilliard equation is utilized to predict phase distribution under varying values of viscosity ratio, κ (=μinjected/μdisplaced), Reynolds number, and Capillary number. For mesh generation within the micromodel, approximately 2 million are used for network width W=10.1 cm and length L=15.3 cm. Depending on the initial conditions set, each simulation in this time-dependent model runs for a duration of 7 to 12 hrs.
To evaluate the model validation, the numerical results are compared with corresponding experiments of drainage/imbibition cycles, performed under varying fluid properties and flow conditions [5]. Special attention is paid on the potential to predict numerically the visualized flow pattern and the measured transient response of the pressure drop, when the oil phase in drainage or the aqueous phase in secondary imbibition are non-Newtonian shear-thinning fluids, by accounting for the actual fluid rheology. During the drainage stage, there is a notable agreement between the experiment and the numerical model. Discrepancies, minor in nature and within a 20% deviation, can be attributed to the idealized structure inherent in numerical simulations. Additionally, the consistency between 3D and 2D model outcomes suggests that a two-dimensional representation adequately captures the complexities of the problem without significant loss of information.
Acknowledgments
This work was performed under Grant Agreement 101037509 — SCENARIOS — H2020-LC-GD-2020 / H2020-LC-GD-2020-3 (project title: “Strategies for health protection, pollution Control and Elimination of Next generAtion RefractIve Organic chemicals from the Soil, vadose zone and water” - acronym “SCENARIOS”) supported by the European Commission.

Speaker: Dr Christos Tsakiroglou (Foundation for Research and Technology Hellas - Institute of Chemical Engineering Sciences (FORTH/ICE-HT))

09:25 DuMux -- an open-source simulator for solving flow and transport problems in porous media with a focus on model coupling

DuMux (https://dumux.org/) is a general simulation framework (written in C++) with a focus on finite volume discretization methods, model coupling for multi-physics applications, and flow and transport applications in porous media. Its core applications are single and multiphase flow applications in porous media on the Darcy scale, embedded network and fracture models, and free-flow porous media flow interaction. However, it can also be used as a general-purpose finite volume / control-volume finite element solver for partial differential equations. Pre-implemented models, make it a versatile tool for many porous media applications.

In this poster contribution, we give a brief overview of the main features and application areas. Moreover, we present updates in recent years (including the upcoming release of DuMux version 3.9, Spring 2024) and how the capabilities have improved since the initial appearance of DuMux 3.0 (which is described in [1]). Novelties include additional (pore-)network modeling capabilities, 2D shallow water equations (e.g. for river modeling), new control-volume finite element schemes, methods for free-flow porous media coupling, fractured porous media, multithreaded assembly, and new tutorials and educational material.
Given the theme of the conference, we put a special emphasis on "Porous Media & Biology" applications and models in DuMux.

DuMux is based on the DUNE framework from which it uses the versatile grid interface, vector and matrix types, geometry and local basis functions, and linear solvers. DuMux then provides finite volume discretizations (Tpfa, Mpfa, Staggered) and control-volume finite element discretization schemes (P1, CR/RT, MINI); a flexible system matrix assembler and approximation of the Jacobian matrix by numeric differentiation; a customizable Newton method implementation, and many pre-implemented models (Darcy-scale porous media flow, Navier-Stokes, Geomechanics, Pore network models, Shallow water equations) and constitutive models. DuMux features a multi-domain framework for model coupling suited to couple subproblems with different discretizations/domains/physics/dimensions/... and create monolithic solvers.

Acknowledgement: DuMux has been developed since 2010 with contributions from over 80 developers. The poster contribution will mention the poster authors and acknowledge an updated list of developers actively contributing to DuMux since the release of version 3.0.

Speaker: Timo Koch (University of Oslo)

09:25 Effect of feldspar on direct carbonation of CO2 by wet process

With the rapid development of the global economy and the large consumption of fossil energy, the increase of CO2 emissions year by year leads to global warming and a series of ecological and environmental problems. Mineralized storage of carbon dioxide in geological structures is a promising method, among which the wet direct mineral carbonation technology has been widely concerned because of its safety and stability. In this study, the effects of feldspar minerals on the conversion efficiency of mineralization storage in sandstone reservoirs containing highly reactive minerals were simulated by using high-temperature and high-pressure reactor and magnetic stirrer to achieve the purpose of increasing the conversion rate of mineral carbonation. ICP-OES, SEM-EDS, XRD, TGA and other methods were used to determine the changes of ion concentration, surface morphology, reaction products and carbonization degree. Through analysis, it is found that with the difference of content of feldspar, different degrees of dissolution will occur, the surface is rough and uneven, the dissolution rate of potassium feldspar is slightly lower than that of albite, magnesite precipitation in the reaction process and kaolinite secondary precipitation will be attached to the mineral surface. Feldspar affects the degree of carbonization indirectly by dissolving and producing secondary minerals.

Speaker: Zhigang Liu (Dalian University of Technology)

09:25 Effect of Heterogeneous Structure on Salt Precipitation Behavior under Solution Supply Boundary Conditions

CO2 geological storage in saline aquifers is considered a foundational technology for achieving the "dual-carbon" goals. After injecting dry CO2 into saline aquifers, the evaporation of water triggers salt precipitation. This process impacts injectivity, potentially shortening injection well lifespan and hindering commercial storage projects, leading to extensive laboratory research. Some scholars have found that geological heterogeneity can significantly alleviate the local aggregation of salt at the inlet, reducing the adverse effects of salt precipitation on injectivity. However, these studies have not considered the influence of solution supply boundary conditions on research results. Further investigations are needed to determine whether heterogeneous structures can still mitigate the impact of salt precipitation under the influence of solution supply boundary conditions. Therefore, this study will conduct pore-scale experiments by designing a heterogeneous micromodel with solution supply to explore the impact of heterogeneous structures on salt precipitation behavior and injectivity.
This study investigates the impact of different CO2 injection rates, supplemental solution injection rates, and temperature on salt precipitation and distribution by designing a micromodel with solution supply for heterogeneous structures. Pore-scale experiments directly observe the transport behavior of the solution and the growth process of salt inside the micromodel, exploring the growth mechanism of salt in heterogeneous structures under supplemental solution conditions and its impact on injectivity. The results indicate that under low supplemental solution flow and a modest CO2 injection rate, continuous alternate solution supply results in sheet-like salt growth, impacting injectivity without complete inlet blockage. With high supplemental solution flow and a low CO2 injection rate, salt expansion leads to a "wet salt barrier," causing rapid injectivity decline as all inlet channels are blocked. As salt reaches a dynamic equilibrium of precipitation and dissolution, violent solution fluctuations persist, continuously dissolving salt in the inlet area, yet reducing injectivity. Increasing the CO2 injection rate enhances evaporation, promoting outward salt growth. Despite connectivity on both sides of the inlet, wet salt creates capillary resistance, protecting the solution and maintaining injectivity. Higher CO2 injection and supplemental solution flow maintain injectivity with solution reflux at the inlet. Under conditions of high supplemental solution flow and low CO2 injection rate, lowering the temperature to 25°C results in clustered salt precipitation in the evaporative front of the large pore area. Conversely, at 75°C, rapid cluster-shaped salt precipitation blocks all inlet channels, severely reducing injectivity. Considering the boundary solution supply, heterogeneous structures generally prove effective in mitigating the impact of salt precipitation in most cases. For instance, choosing injection wells in formations with strong heterogeneity and lower temperatures can alleviate blockages caused by salt precipitation, providing a potential solution to enhance injectivity and optimize CO2 geological storage in saline aquifers. However, under higher temperatures and lower CO2 injection rates, the effectiveness of heterogeneous structures in mitigating salt precipitation may diminish. Therefore, during the selection of injection parameters and site locations, precautions should be taken to avoid these scenarios.

Speaker: Dr Di He (Xiamen University of Technology)

09:25 Experimental study on the distribution characteristics of CO2 in methane hydrate-bearing sediment

CH4/CO2 replacement is of great significance for the exploitation of natural gas hydrate resources and CO2 storage. The feasibility of this method relies on our understanding of CH4/CO2 replacement efficiency and mechanism. In this study, CH4/CO2 replacement experiments were carried out to study the distribution characteristics of CH4 and CO2 in hydrate-bearing sediments during and after replacement. Similar with previously reported data, our experiments also implied that the CH4/CO2 replacement process could be divided into two stages: fast reaction and slow reaction, representing CH4/CO2 replacement in hydrate-gas interface and bidirectional CH4/CO2 diffusion caused replacement, respectively. After replacement, the CO2 content gradually decreased, and the methane content gradually increased with the increase of sediment depth. Higher re-placement percentage can be achieved with higher replacement temperature and lower initial saturation of methane hydrate. Based on the calculation of CO2 consumption amounts, it is found that the replacement mainly took place in the fast reaction stage while the formation of CO2 hydrate by gaseous CO2 and water almost run through the whole experimental process. Thus, the pore scale CH4/CO2 replacement process in sediments can be summarized in the following steps: CO2 injection, CO2 diffusing into sedimentary layer, occurrence of CH4/CO2 replacement and CO2 hydrate formation, wrapping of methane hydrate by mixed CH4-CO2 hydrate, continuous CO2 hydrate formation and almost stagnant CH4/CO2 replacement.

Speaker: Chengfeng Li

09:25 Inertial Effects on convection heat transfer in deformable heterogeneous fracture media

In the process of geothermal exploitation, the high flow velocity within rock fractures wouldlead to inertial effects flow characteristics, which affects the convective heat transfer behaviors, especially under variable applied stress. Through establishing a series of three-dimensional rough fracture models with varying heterogeneous apertures, to represent different stress conditions, the inertial effects convection heat transfer in deformable rough-walled fracture,considering the various flow velocities and temperature conditions, was investigated. The findings indicate: 1）inertial effectsinduced flow enhances heat convective, and larger apertures result in higher fluid temperatures and lead to more pronounced inertial effects induced heat convective; 2）smaller apertures exhibit more pronounced non-uniform temperature distribution, thereby increasing the sensitivity of inertial effects induced flow to rock temperature; 3）Establishing a quantitative relationship between the coefficients A and B of the Forchheimer equation describing inertial effectsflow behavior and temperature, a critical criterion for inertial effects seepage in fractures under different temperature conditions was proposed. These research contribute to a better understanding of heat transfer mechanism in geothermal exploitation.

Speaker: Yuedu Chen (Taiyuan university of technology)

09:25 Integrated Workflow of Fracturing-Flowback-Production in Tight Oil Reservoirs with a Focus on Fracturing Fluid Leak-off.

Hydraulic fracturing in tight oil reservoirs requires injecting large volumes of fracturing fluid into the formation while only a small proportion of fracturing fluid can flow back during the production phase. The retained fracturing fluid will affect subsequent production. We implement an integrated workflow which simulates fracture propagation through a full 3D simulator and seamlessly docks to an efficient reservoir numerical simulator, then we simulate the injection phase and subsequent production phase using dilation/compaction curves based on fracturing pump injection data and actual production data. The workflow has been successfully applied to a field case in the Daqing Oilfield, China. Our simulations effectively match the oil and water production data and prove our hypothesis that numerous microscale fractures are generated during hydraulic fracturing which cause significant leak-off of the fracturing fluid. The closure of microscale fractures during production phase results in the retention of the fracturing fluid and stable water cut after several months of production.

Speaker: Mr Wensheng Wu (China University of Petroleum(Beijing))

09:25 Investigation on pore structure and imbibition characteristic of tight sandstone by nuclear magnetic resonance

Abstract: Tight sandstone reservoir, as unconventional oil and gas resource with abundant quantity, plays a significant role in supporting the growing global demand of energy consumption. However, tight sandstone has complex pore structure and strong heterogeneity, which brings challenges to the development of unconventional hydrocarbon resource. In recent years, the nuclear magnetic resonance method has been widely applied in porous media with the advantages of nondestructive, fast and wider range of pore size characterization in investigating pore structure. But pore size distribution curve cannot be obtained directly by nuclear magnetic resonance method. The transverse relaxation time spectrum from nuclear magnetic resonance could be converted into the pore size distribution curve by appropriate surface relaxivity, which can be affect by paramagnetic minerals and varies with lithology. Using low temperature nitrogen adsorption method, high-speed centrifugation method, and nuclear magnetic resonance, the surface relaxivity of five tight sandstone samples from different depths of Dongying depression was measured in this study. And then the influence of mineral composition from experimental samples on surface relaxivity was discussed. In addition, the pore size distribution curve from mercury intrusion porosimetry is utilized to verify the accuracy of the pore size distribution curve inversed by the surface relaxivity. Based on the obtained surface relaxivity, imbibition experiments under high temperature and high pressure conditions were conducted combined with nuclear magnetic resonance technique. Then the flow characteristics of whole cores and different pore size types (micropores, mesopores and macropores) influenced by temperature and pressure was analyzed, and the imbibition mechanism of tight sandstones resource was revealed.
Keywords: NMR, Surface relaxivity, Pore size distribution, Imbibition

Speaker: Xuanzhe Xia (China University of Petroleum-Beijing)

09:25 Large PV carbon dioxide flooding mechanism of ultra-low permeability tight reservoir in Songliao Basin

Abstract: Based on sandstone reservoir samples in Songliao Basin, carbon dioxide displacement of saturated crude oil core experiments were carried out, combined with nuclear magnetic resonance and oil component analysis, to study the mechanism of carbon dioxide oil recovery. The rock samples with proper permeability including medium permeability, low permeability, ultra-low permeability and tight permeability in Songliao Basin were selected to analyze the effect of permeability on carbon dioxide displacement. The displacement experiment was divided into three stages to analyze the effect of injected PV number on CO2 displacement. Taking large PV carbon dioxide flooding of ultra-low and tight permeability rock samples as the research focus, the mechanism of large PV carbon dioxide flooding of ultra-low permeability and dense reservoirs in Songliao Basin is studied by using the method of controlling variables. Experiments show that large PV CO2 flooding can obtain good recovery results for ultra-low permeability and dense reservoirs. After low-PV displacement, the average harvesting degree of low-permeability and medium-permeability samples was 30.56%, and that of ultra-low-permeability and dense samples was 26.21%. After large-PV displacement, the average recovery degree of low-permeability and medium-permeability samples was 55.92%, and the average recovery degree of ultra-low-permeability and dense samples was 67.00%. This indicates that large PV carbon dioxide flooding can effectively improve reservoir recovery, and the improvement range is more obvious for ultra-low permeability and dense reservoirs. Large PV complete miscible CO2 displacement can obtain a good final recovery degree, up to 67.49%. Complete miscible displacement can well displace various components of crude oil including heavy components. There is little difference in the oil family components in different displacement stages, but there is still an obvious effect of extracting light components. The peak value of oil components gradually shifts from near C12 in the early stage to near C17 in the late stage. The carbon dioxide extraction will make the heavy components of crude oil deposited on the pore throat surface. The deposition phenomenon is more obvious in ultra-low permeability and dense reservoirs when injected with low PV number, while the deposition phenomenon is weak in medium and low permeability oil reservoirs. After large PV carbon dioxide flooding, heavy components in ultra-low permeability and dense reservoirs are well recovered, and the final recovery degree of heavy components is similar to that of medium and low permeability oil reservoirs, indicating that large PV carbon dioxide flooding is more suitable for ultra-low permeability and dense reservoirs.
Key Words: sandstone reservoir；carbon dioxide；ultra-low permeability and dense；nuclear magnetic resonance (NMR)；component analysis

Speaker: Rui Xu (Institute of Porous Flow & Fluid Mechanics, China National Petroleum Corporation &Chinese Academy of Sciences)

09:25 Mechanism Research on Rapid Expansion of Steam Chamber Based on Nitrogen Inducing

For heavy oil reservoirs buried over 3000 ft, the high pressure would lead to low dryness and expansion difficulty for injected steam. Therefore, they are mostly developed by steam huff and puff, and the EOR methods such as steam flooding and SAGD cannot be used. As a results, the oil recovery could hardly reach 25%.
In order to solve this problem, a method of rapid expansion of steam chamber using nitrogen inducing is proposed based on nitrogen assisted flow experiment and reservoir numerical simulation study. Firstly, the effects of nitrogen concentration on partial pressure and dryness of steam under high temperature and high pressure were obtained by phase behavior experiment, which indicated that additive nitrogen amount of 20~40% would decrease the steam saturated vapor temperature over 54℉. Secondly, the phase distribution during the fluid flow and heat dissipation process were analyzed by pore-scale multiphase flow simulation, and the nitrogen would restrain the steam condensation process and increase the gas saturation along the flow direction. In the meantime, the core flow experiment shows that the nitrogen gas could decrease the multi-component fluid flow resistance over 84%, which can be considered as strong flow conductivity in porous media. Taking advantage of nitrogen gas inducing ability, the nitrogen pre-injection would build a fast flow channel in relatively higher permeability layer. It could also reduce the injection pressure over 260 psi and enhance the steam dryness about 0.15. Inside the fast flow channel, the follow-injected steam would reach a longer flow distance and higher saturation horizontal plane. As a results, the steam overlap around the injection well would get relatively slower due to the high flow velocity on horizontal plane. Then the gravity drainage process can heat and displace the heavy oil above the fast flow channel, and partial nitrogen gas would gather at the top of the reservoir and reduce the heat loss to the cap rock by 11% by reservoir numerical simulation evaluation.
Overall, this method can improve the thermal recovery over 19% and reduce the oil-steam ratio about 0.05, which provides a new way for economical thermal EOR in deep heavy oil reservoirs.

Speaker: Haojun Xie

09:25 Methodology for constructing 3D model of the transitional oil-water zone of oil field deposit

In this work, the transition zone is understood as the volume of a productive formation with water saturation (Kw) varying from 100% at the free water surface to residual water saturation (Krw) in the oil part of the reservoir. Accordingly, the height of the transition zone is determined above the level of free water saturation (Hfw).
The action of capillary forces at the oil-water interface leads to the rise of water, and in areas with a small radius of capillaries, where the pressure is higher, the water rises to a greater height. As a result, the structure of the transition zone takes on a complex appearance, and the values of the oil saturation coefficient (Koil) in the reservoir volume change from zero to maximum oil saturation, where all open porosity is filled with oil.
For hydrophilic reservoirs, electrical resistivities are related to their fluid saturation and can be used in estimating the water saturation coefficient (Kw). Capillarimetric studies in estimating Kw are based on conducting experiments on core samples with determining the dependences of capillary pressure curves Pk=f(Kw).
The problem of 3D distribution of parameters Kw and Koil can be solved on the basis of a comprehensive accounting of well logging data and capillarimetric core studies. To solve the problem posed, the complex parameter of the squared ratio of permeability to porosity √(k/Kp) was used as the main parameter, the physical meaning of which is proportional to the radius of the pore channels for an ideal environment. In this case, methods of multidimensional mathematical modeling were used using the Scipy.optimize software package.
As a result, the distribution in three-dimensional space of the complex parameter Kw/√(k/Kp) was obtained depending on the filtration-capacitance properties and Hfw. The mathematical model of the change in the parameter Kw/√(k/Kp) obtained on the basis of sequential quadratic programming according to capillarimetry data is described by the equation:
Кw/√(k/Kp) =200 • (8.981 • exp(-10.47 • √(k/Kp))+0.13 • exp(-9.46 • Нfw /100)+1.82 • exp(- 1.65 • √(k/Kp)) • exp(-0.59 • Нfw /100)+0.007) at R=0.98; n=7644.
Based on the obtained water surface elevation, the values of the parameter Kw/√(k/Kp) were calculated for each point in the 3D space of the deposit. As a result, an increase in the undersaturation zone is observed in the upper part of the reservoir, within which Koil increases from zero at the level of the clean water table to the value of the residual oil saturation. The zone of extreme saturation, where all water is capillarily bound, occupies only the uppermost central part of the deposit. Taking into account the parameters of transitional oil-water zones during 3D modeling shows that the idea of the distribution of oil saturation has fundamentally changed, which significantly affects the performance of technological calculations in geological and hydrodynamic modeling.
The research was funded by the Ministry of Science and Higher Education of the Russian Federation (Project No. FSNM-2023-0005).

Speaker: Sergey Galkin (Perm National Research Polytechnic University)

09:25 Microscopic Simulation Methods for the Movement and Effects of Nanoparticles at the Oil-Water Interface

Nanoparticles are widely used in biomedicine, nanoelectronics, energy devices, and Enhancing Oil Recovery (EOR) due to their unique thermodynamic properties and large specific surface area. Recent research highlights the significant impact of the adsorption and diffusion behavior of nanoparticles at the oil-water interface on interfacial properties, particularly interfacial tension. This suggests that nanoparticles hold the potential to become pivotal materials for altering the permeability characteristics of oil-water flow within porous media. The lattice Boltzmann (LB) method emerges as a powerful mesoscale simulation technique for accurately modeling multiphase flows. In this method, the color gradient model, precisely characterizing parameters such as contact angles and interfacial tension, enables the accurate simulation of oil-water biphasic systems. The Langevin-Dynamics (LD) method excels in providing a detailed force-based characterization of nanoparticles in fluids, encompassing electrostatic forces, van der Waals forces, stochastic forces, and frictional forces. This methodology facilitates the microscale simulation of particle dynamics with a comprehensive understanding of the forces acting on nanoparticles in fluid environments.

A pioneering hybrid pore-scale simulation methodology was firstly introduced for the simulation of movement of nanoparticles and oil-water, employing the integration of Lattice-Boltzmann (LB) with Langevin-Dynamics (LD) for an in-depth exploration of the interactions involving nanoparticles at the oil-water interface. Leveraging the LB method, a high-resolution portrayal of the oil-water interface is established. Subsequently, through a discrete distribution of LB forcing sources, the LD method is incorporated to capture the influences of Brownian motion, thermal fluctuation-dissipation, multi-body hydrodynamics, and particle-particle interactions.

The simulation results indicate that the diffusion and adsorption behavior of nanoparticles at the oil-water interface significantly influences the interfacial tension. The results indicate that the diffusion rate of nanoparticles in a single phase (aqueous phase) is 4 to 6 times higher than the diffusion efficiency at the interface. As the particle size decreases according to a power-law, the diffusion coefficient of nanoparticles increases according to a power-law. This implies that nanoparticles with smaller particle diameters exhibit higher mobility and are more prone to move and adsorb at the oil-water interface. Based on these findings, we firstly propose a modified Langmuir adsorption equation, adjusted for particle non-equilibrium adsorption times (τe), to characterize the impact of nanoparticles on the interfacial tension at the oil-water interface. The equation can depict the real-time variation of the oil-water interfacial tension with increasing adsorption time. Compared to the conventional Langmuir adsorption equation, the computational accuracy is improved by approximately 15%. Finally, we observed the influence of SiO2 nanoparticles and NM4 (with four dodecyl chains uniformly modified on one side) nanoparticles on the oil-water interfacial tension under different particle sizes and injection concentrations. It was found that NM4 exhibited a 1.45 times greater reduction in interfacial tension compared to SiO2 nanoparticles. Meanwhile, small-sized (15 nm) and high concentration (0.08 wt%) of SiO2 nanoparticles have a more pronounced effect in reducing interfacial tension from 24.0 mn/m to 14.1 mn/m.

Speaker: Can Ke

09:25 Multifactorial Analysis of Oil- Relative Permeability Stress-Sensitivity in CO2 Huff-n-Puff Enhanced Tight Oil Reservoirs

This study addresses the challenges in developing tight oil reservoirs using CO2 Huff-n-Puff methods, arising from stress-sensitive relative permeability curves for oil and CO2 due to variable pressure-induced pore structure deformation. The primary aim is to investigate the mechanics of oil-CO2 relative permeability's stress-sensitivity at a micro level and to develop a mathematical model that accurately computes the oil-CO2 relative permeability curve for specified pore pressures.

Initially, the study quantifies the deformation characteristics of pores in tight formations by establishing a correlation between pore radius and pressure. Subsequent analysis involves determining the variation in critical two-phase flow parameters at a micro-nano scale, such as formation wettability, oil-CO2 interfacial tension, and capillary forces, utilizing experimental data. Incorporating the observed trends in pore radius and two-phase flow parameters under varying pressures, a fractal theory-based mathematical model of oil-CO2 relative permeability is formulated.

Research findings indicate a decrease in pore radius with increasing pore pressure, a relationship quantitatively described using a model grounded in elastic mechanics theory. The study delineates the dual impact of pore pressure on two-phase flow parameters: a direct influence manifesting as an increase in contact angle and a decrease in surface tension, and an indirect effect through pore radius reduction altering these parameters. The combined impact of these changes culminates in alterations in wettability, surface tension, and capillary forces with varying pore pressures. Utilizing established relationships between pore radius, two-phase flow parameters, and pressure, the paper presents a novel oil-CO2 relative permeability model capable of calculating the permeability curve for given reservoir pressures.

The technical contributions of this research are twofold: (1) a detailed exploration and quantification of the micro-level mechanics behind oil-CO2 relative permeability's stress-sensitivity, and (2) the development of a stress-sensitive oil-CO2 relative permeability mathematical model, applicable in the context of tight oil reservoirs undergoing CO2 Huff-n-Puff treatment.

Speaker: Xiangji Dou (Changzhou University)

09:25 Numerical simulation and completion design optimization of sand production in depressurization exploitation of natural gas hydrate in South China Sea

Natural gas hydrate has large reserves and a high level of heat value, which is the strategic commanding point of global energy development. The hydrate reservoirs in the South China Sea are shallowly buried and have low cementation strength. In the process of exploitation for the hydrate reservoirs, workers often face problems such as large sand production, formation instability, and low efficiency of exploitation. In order to further study the production capacity and sand production during the process of exploitation, this study focuses on the characteristics of hydrate reservoirs in the Shenhu area of the South China Sea. Based on the CMG-STARS platform, a numerical model, coupled with thermos-hydro-chemistry processes, was established to explore the effects of completion horizon, completion length and production pressure on reservoir productivity and sand production law in vertical well depressurization mining. The results show that: The well completion in the middle of the reservoir is 21% and 15% higher than that at the top and bottom respectively, and the cumulative gas-to-water ratio is higher and the development effect is better, while the sand production problem at the top and middle of the reservoir is more serious. Under the current simulation conditions, considering the production capacity and sand production, the exploitation effect is the best when the completion length is 10m. Continue to increase the completion length, the production increase is reduced, only 19% increase, and the sand production increases sharply. The lower the production pressure is, the better the productivity is, and the more serious the sand production is. When the production pressure continues to decrease, the yield increase effect decreases, while the sand production still increases significantly. This study can provide a theoretical basis for the development of natural gas hydrate in the South China Sea.

Speaker: Yu Qin (China University of Petroleum(Beijing))

09:25 Optimization of Water Control and Oil Stabilization Scheme for Edge and Bottom Water Heavy Oil Reservoir

In the development process of edge and bottom water heavy oil reservoir, the existence of edge and bottom water will affect the production effect of the reservoir. Compared with conventional oil reservoirs, edge and bottom water heavy oil reservoirs have a series of production problems, such as short oil production periods without water, rapid rise in water cut, high production cost, and low economic efficiency, resulting in generally low recovery factor. In this study, the advantages of N2, foam, CO2, and the viscosity reducer were used to give full play to their synergies through combination, the water control and oil stabilization technology of edge and bottom water heavy oil reservoir was formed to inhibit the coning of bottom water, reduce the viscosity of the oil, control the rise of water cut, and achieve the effect of improving the recovery factor. Four water control and oil stabilization schemes are designed in the paper, and the optimal water control and oil stabilization huff and puff technology scheme is identified as N2 foam + CO2 viscosity reducer + N2 through one-dimensional sand-packed tube physical simulation experiments. The results show that this scheme has the triple mechanism of N2 foam can slow down the coning of bottom water, CO2 and the viscosity reducer dissolving and energizing, the synergistic viscosity-reducing effect of deep propulsion, and N2 supplementing the formation energy, which can significantly improve the oil production, reduce the water production, and inhibit the rise of water cut. The final recovery factor reached 39.81%, an increase of 16.09 percentage points. The results of this study can provide a reference basis for the development of mining technology programs for similar blocks of edge and bottom water heavy oil reservoir after entering the high water cut period.

Speaker: lilong Xu (China university of petroleum (East China))

09:25 Petrophysical Properties Estimation Based on Digital Rock Modeling for Sandstone

Permeability and capillary pressure curve are important to characterize hydrocarbon-bearing formations. There are several laboratory approaches to estimate such petrophysical properties. Nevertheless, one faces with the range of complications such as uncertainties during laboratory measurements, treating micro- and nano-pore permeability and multi-scale geometry of the pore space, complex mineral composition.
Within this work, to provide petrophysical properties prediction we combined laboratory investigation and one- and two-phase fluid flow simulations using digital rock models. The workflow was applied for low permeable samples from sandstone reservoir with measured complex mineral composition. We utilized the combination of high-contrast µCT scanning technique and Focused Ion Beam milling with Scanning Electron Microscopy (FIB-SEM) to construct high quality 3D multiclass digital rock models of sandstone samples. The constructed 3D multiclass digital rock models were used as an input for simulations of one- and two immiscible fluid flow through such 3D multiclass porous media and further analysis. Numerical approaches include the direct Navier-Stokes, the Lattice Boltzmann methods. Permeability and drainage capillary pressure curves were experimentally determined from laboratory measurements on core samples and compared to the simulation results. Both predicted permeability and drainage capillary pressure curves were in a good agreement with experimental values.

Acknowledgments: Authors thank the Ministry of Science and Higher Education of the Russian Federation under agreement No. 075-10-2022-011 within the framework of the development pro-gram for a world-class Research Center.

Speaker: Dr Lyudmila Khakimova (University of Lausanne; Skoltech Institute of Science and Technology)

09:25 Pore scale characteristics of CO2 trapping and oil recovery in heterogeneous layered sandstone

The vertical variation in permeability is a typical heterogeneity of pore structure in sandstone reservoirs. We thus constructed a millimeter sized layered sandstone, and performed water-alternating-gas (WAG) injection and CO2 foam flooding. After each gas injection, the core was placed vertically for 24 hours and horizontally for 24 hours respectively to study the influence of gravity on fluid migration. The fluid distribution obtained by high-resolution X-ray microtomography indicates that layered heterogeneity leads to a large amount of oil being trapped in the low-permeability layer. Although the WAG strategy improves the oil recovery of layered porous media, a large amount of oil is still trapped in low-permeability layers after two WAG cycles. After CO2 foam flooding, the oil in the low-permeability layer can be effectively recovered. During the no-injection period, the difference in fluid density caused fluid migration and crossflow, that is, the oil in the low-permeability layer decreased while the oil in the high permeability layer increased, which is beneficial for subsequent oil production. Increasing the number of WAG cycles is beneficial for improving the CO2 capillary trapping efficiency. The relative permeability of CO2 in low-permeability layers is relatively low, with residual gas mainly distributed in single pores. CO2 clusters in the low-permeability layer have a large surface area to volume ratio, thus the CO2 capillary trapping is more stable, and the amount of CO2 dissolution trapping will be greater.

Speaker: Yingwen Li

09:25 Pore structure characteristics of shale oil reservoirs in the Songliao Basin

Based on 31 rock samples from a shale oil reservoir in the Qingshankou Formation of the Songliao Basin, combined with high-pressure mercury injection, constant velocity mercury injection, and scanning electron microscopy techniques, the microscopic pore structure characteristics of the shale oil reservoir in the Songliao Basin were studied. The results show that the target shale oil reservoir has a smaller matrix throat, with the main throat distributed between 5 nanometers and 35 nanometers; The effective throat of the rock sample is few (12), and the saturation of mercury injection is low, mainly through the throat. Scanning electron microscopy shows that the target shale oil reservoir has a dense matrix, with a large number of nano scale micro pores and a small amount of micro scale pores, but mostly in isolated form; Development of micro cracks such as fissures and interstitial cracks in the reservoir; Organic matter is present in the reservoir, mostly in patchy and strip-shaped shapes.

Speaker: Haibo Li

09:25 Pore-scale experimental investigation of low-salinity waterflooding for enhanced oil recovery

Low-salinity waterflooding (LSWF) is a promising enhanced oil recovery method that has shown exciting results in various experiments conducted at different scales. With the development of imaging technologies, micro-CT is also employed to investigate LSWF and the synergistic effects of low-salinity brine and polymer. Micro-CT enables the observation of fluid behaviors and the explanation of mechanisms, providing a comprehensive understanding of the pore-scale displacement process during LSWF.

Speaker: Chunyu Tong (China University of Petroleum(East China))

09:25 Pore-Type-Dependent microstructures of Shales and Implications on Permeability

Pore structure features govern the capacity of gas storage and migration in shales and are highly dependent on the types of pores, i.e., interparticle (InterP) pores, intraparticle (IntraP) pores and organic matter (OM)-hosted pores. However, microstructures and fractal features regarding pore types and their respective contributions to permeability have been rarely addressed. Based on SEM and FIB-SEM imaging, fractal dimensions (Ds) have been determined from both pore size distributions and digital rock to quantify the heterogeneity in pore morphology and spatial textures. Overall, OM-hosted pores are smaller in size and more abundant in quantity, corresponding to a relatively high D, while IntraP pores are mainly isolated and scarce, translating into lower D values. Additionally, crack-like InterP pores with a moderate level of porosity and the D can play a pivotal role in shale seepage potential. A comparison of the estimated permeability among different pore types highlights that the contribution of interconnected OM pores to the overall permeability remains constrained unless they can link neighboring pore clusters, as commonly observed in organo-clay composites. Furthermore, pore morphology and fractal features of shale rocks can exhibit noteworthy variations subjected to sedimentology, mineralogy, diagenesis and OM maturation.

Speaker: Dr Qian Zhang (The Institute of Geology and Geophysics, Chinese Academy of Sciences)

09:25 Production prediction of fractured horizontal wells in shale gas reservoirs based on multi-scale flow

There are abundant shale gas resources in China. The technological recoverable resources amount to 21.8 trillion cubic meters, with a proven rate of only 4.8%, and the resource potential is huge. Shale reservoir permeability is very low. It must be fractured to obtain effective productivity. Moreover, the research on the special seepage law of shale gas reservoir is far behind the production practice: the complex multi-scale reservoir and flow space and various modes of existing of shale gas reservoir lead to strong non-linear and multi-transport mechanism characteristics of gas in the flow process, and lack of comprehensive flow model to characterize the multi-scale flow law of shale gas reservoir; At the same time, complex fracture network is formed around horizontal wells. How to accurately simulate and predict the production performance after fracturing become the technical bottleneck of restricting the efficient development of shale gas reservoirs.
Considering the non-linear seepage mechanism of adsorption-desorption, slippage, Knudsen diffusion, surface diffusion, stress-sensitive effect, the mathematical models of shale gas seepage at different scales were established. The multi-scale seepage mechanism was coupled with the continuous medium-discrete fracture model, and the gas-water two-phase synthesis of multi-stage fractured horizontal wells in shale gas reservoirs were constructed. In order to avoid the large increase of mesh number and computation caused by local refinement around fractures by traditional orthogonal grids, based on unstructured triangular mesh and tetrahedral mesh, combined with the control volume-finite element (CVFE) method, a fully implicit numerical model of gas-water two-phase seepage was constructed. Finally, the effects of shale reservoir properties, multi-scale seepage, fracture network geometry and production system on the production performance of multi-stage fractured horizontal well and the optimization of parameters were studied.

Speaker: Ruihan Zhang (Southwest Petroleum University)

09:25 Relationship between Pore Structure and Reaction Characteristics in Supercritical Water Gasification of Chunk Coa

Due to the essential differences in mass and heat transfer in supercritical water pyrolysis of lump coal, this study focuses on low coalification degree lignite. Employing an organic rock supercritical water reaction apparatus in conjunction with nuclear magnetic resonance and differential scanning calorimetry, we investigated the reaction characteristics of chunk coal supercritical water gasification under continuous water injection conditions. The study explored the influence of different temperatures, pressures, and gasification reaction times on mass and heat transfer, gas yield, and composition of chunk coal. The research outcomes reveal: 1) With increasing temperature and pressure, the specific heat capacity exhibits an initial rise followed by a decline; 2) Carbon gasification efficiency improves with prolonged reaction time, while H2 yield shows an initial increase followed by a decrease; 3) Combining nuclear magnetic resonance images with DSC curves, it is observed that with the extension of temperature and reaction time, the fractures in chunk coal increase, leading to enhanced mass and heat transfer efficiency.

Speaker: Xuanhao Zhang (Taiyuan University of Technology)

09:25 Research and evaluation of damage mechanism of pore scale water phase trap in tight sandstone gas reservoir based on numerical simulation

Background, Aims and Scope.
Tight gas resources are abundant and widely distributed, which is an important part of unconventional gas exploration and development. However, the tight sandstone reservoir has the characteristics of low porosity and permeability and micro-fracture development, so the water phase trap damage is more serious in the process of reservoir reconstruction. In addition, it is difficult to evaluate the damage of water phase trap in tight sandstone gas reservoirs at pore scale, and it is impossible to make a more accurate judgment of flowback and production pressure difference, which restricts the development of tight gas. Therefore, this study has practical guiding significance for the efficient development of tight sandstone gas reservoirs.
Methods.
Through core NMR experiments and finite element numerical simulation, the spatial and temporal distribution of water saturation and pressure in the pore throat of the gas-water phase in the process of forced imbibition and flowback is verified. The water phase trap damage degree of tight sandstone gas reservoirs at micro scale is evaluated by treating the part of the flowback model higher than the specific water saturation as the matrix.
Results and Discussion.
(1) In the process of forced imbibition, the high pressure area mainly concentrated in the blind end and narrow throat; The liquid phase flows rapidly through the dominant channel, and after a period of time, the distribution of pressure and water saturation in the whole system tends to be stable. (2) After flowback, a large number of isolated bubbles appeared in the capillary channel, which increased the frequency and severity of the occurrence of Jamin effect, resulting in a large amount of fracturing fluid remaining in the pore throat; (3) The calculated results of the model are basically consistent with those of core NMR. (4) The permeability of the two models before and after imbibition reflux was calculated respectively. The permeability of the model after imbibition reflux was significantly lower than that of the model before imbibition.

Speaker: Xingyu Tang (西南石油大学)

09:25 Research on Gas Water Two Phase Flow Behavior in Shale Reservoirs

Abstract:
Background. Shale blocks are dense and have low porosity, resulting in shale gas reservoirs having no natural extraction capacity. Therefore, large-scale hydraulic fracturing is often used in engineering to increase production and transform shale gas reservoirs, in order to achieve commercial development of shale gas reservoirs. After hydraulic fracturing construction, hydraulic fractures and fracture networks with certain conductivity can form in shale reservoirs. However, complex fracture networks can significantly increase the contact area between fracturing fluid and rock, promoting the infiltration and absorption of fracturing fluid. Shale reservoirs have the characteristics of developing micro nano pores and high clay mineral content. The fracturing fluid entering the reservoir is trapped in the reservoir under the combined effects of capillary pressure and clay mineral water absorption and expansion, making it difficult to flow back to the wellbore. The fracturing fluid trapped in shale reservoirs has two main impacts on the production of shale gas: on the one hand, the trapped fracturing fluid interacts with shale to generate new fractures, connect pores, and promote the extension and expansion of fractures. At the same time, it provides formation pore pressure, avoiding rapid closure of fractures; On the other hand, the stagnant water phase exists on the surface of shale minerals or occupies pore space, which restricts shale gas production and induces fluid sensitivity damage and water phase trap damage. Fracturing fluid infiltration greatly changes the gas water distribution and flow channels in shale reservoirs, increasing the water saturation in the reservoir. In order to improve the efficiency of shale gas utilization, it is urgent to study the gas-water two-phase flow behavior in shale pores and fractures.
Methods Selecting deep shale cores from Dingshan marine facies, conducting single-phase low-speed methane seepage experiments, gas-water relative permeability testing experiments, and gas-water relative permeability testing experiments under high temperature and high pressure conditions under different water saturation levels, to deeply study the gas-water two-phase flow behavior in shale pores and fractures.
Results and Discussion (1) The gas flow rate decreases with the decrease of pressure gradient and increases with the increase of water saturation during the single-phase methane permeation process; As the water saturation increases, the gas permeability of shale cores decreases; As the pore pressure increases, the gas permeability of shale cores decreases. (2) The gas water relative permeability test experiment shows that the gas-water two-phase flow behavior mainly occurs in the fracture space. The test results show that the confined water saturation of the deep shale fractures in Dingshan marine facies is 17.32%~30.63% (average 24.21%), and the water saturation at the isotonic point is 44%~50% (average 47.17%). The deep shale fractures in Dingshan marine facies exhibit water phase wetting. (3) The experimental results of gas-water relative permeability testing under high temperature and high pressure conditions show that, while maintaining constant confining pressure and temperature, reducing pore pressure increases the bound water saturation of gas-water phase permeability, shifts the isotonic point to the left, enhances water phase wettability, and overall reduces gas phase permeability.

Speaker: Yan Yang (西南石油大学)

09:25 Research on Wellbore Injection and Storage of CO2 Mixed Gas

At present, various environmental problems have arisen globally due to climate change. In response to the call of the national dual carbon policy, carbon dioxide geological storage technology is an effective means to reduce carbon dioxide emissions. The purity of CO2 captured from mixed gases in power plants, cement plants, and other industrial industries is usually limited, so it is particularly important to study the wellbore injection and storage of mixed gases. This article establishes the wellbore model based on the classic Ramey wellbore heat transfer model, updates and improves the energy and momentum equations of the model, adds the influence of Joule Thomson effect to the equations, analyzes and calculates the calculation method of physical properties parameters of mixed gases. This article proposes to use the improved BWRS equation combined with advanced engineering thermodynamics knowledge to calculate density, Joule Thomson effect coefficient, and fluid specific heat capacity at constant pressure, By combining the viscosity correlation equation proposed by Lucas and Chung to calculate viscosity, Colebrook's implicit empirical method for solving friction coefficients has been improved, and the total heat transfer coefficient has been iteratively calculated using a thermal resistance model. The physical parameters of each node can be controlled within 5%, and the error obtained by comparing the temperature and pressure field of the final model with experimental data is within an acceptable range for engineering applications. We studied the changes in temperature and pressure fields inside the wellbore when different components CH4, N4, H2, and CO2 were injected into the wellbore under different molar fractions of mixed gas. And analyzed the variation of the physical parameters of the mixed gas under various working conditions with the depth of the wellbore, providing good theoretical guidance and reference opinions for actual CO2 storage projects.
Keywords: CO2 mixed gas; Numerical simulation; Multi component; sensitivity analysis

Speaker: Xin Hwang (大连理工大学)

09:25 Reservoir Quality of low Permeable Eocene Beach-Bar Reservoir, Dongying Depression, Bohai Bay Basin, China

Facies based sedimentological, mineralogical, and textural studies can provide important geological database for the assessment of parameters controlling the reservoir quality. This study deals with the upper fourth member of Eocene Shahejie Formation (Es4s) to evaluate the quantitative and qualitative evaluation to determine the reservoir characteristics and formation mechanism. Core description, petrological and petrophysical analyses including petrography, scanning electron microscopy (SEM) and mercury injection capillary pressure (MICP) have been applied for the purpose of detailed examination as well as the physical properties appraisal. Fine grain size, poor sorting, continuous thin interbedded mud layers with siltstone/fine sandstone having argillaceous material in regular intervals and low sedimentological maturity are main causes of depositional heterogeneity. Despite of the dissolution of grains and matrix, and having numerous fractures, destruction of porosity by cementation and compaction are main causes of diagenetic heterogeneity. The Es4s reservoir experienced multiple alkaline and acidic digenetic environment evolution. The influenced of the early alkaline diagenetic environment caused significant cementation of carbonate cement. The influence of acidic formation fluids caused many dissolution pores in the feldspar and carbonate cement, forming the co-occurring characteristics of primary intergranular pores and acidic dissolution pores. Secondary pores are developed with the increasing effect of diagenesis causing the dissolution of carbonate and feldspar grains. Authigenic clays around the grains, pore filled with clays and secondary cementation destruct the overall porosity and permeability. The depositional and diagenetic characteristics made the reservoir as medium to low porosity and medium to very low permeability with low compositional and structural maturity. The current study provides a better understanding of the target formation coupled to other reservoir attributes identification.

Speaker: Dr Muhammad Aleem Zahid (Department of Marine Geology, Faculty of Marine Sciences, Lasbela University of Agriculture, Water and Marine Science, Uthal, 90150, Pakistan)

09:25 Simulation and Prediction of Natural Restoration for Arsenic-Contaminated Site

Contaminated soils typically possess self-healing capabilities, and the ecological concept of emphasizing natural restoration with supplementary artificial reinforcement has gained widespread acceptance. An investigation was conducted into the arsenic pollution status at an abandoned arsenic factory site in southern China. After identifying the spatial distribution characteristics of arsenic in the soil, indoor soil arsenic dissolution experiments were conducted under different conditions to obtain chemical kinetic parameters during desorption. A relationship model between desorption amount and time was established based on simulation results using Phreeqc. This model aims to predict the natural attenuation of soil arsenic based on natural restoration. The results indicate severe arsenic contamination in the original waste heap soil, with arsenic content reaching 181-283mg within 20cm below the surface in certain local areas. However, high concentrations of arsenic pollutants are mainly concentrated in the depth range of 30-60cm below the surface. This suggests that under the driving force of atmospheric precipitation, arsenic from the original waste heap infiltrates into the soil below the surface of 30-60cm. Due to the transformation of the soil from an oxidizing environment to a reducing environment, arsenic continuously accumulates, forming a relatively stable secondary pollution source that still poses a risk of groundwater contamination. The results of desorption simulation experiments using local normal rainfall and acid rain (pH=4.6) show that normal atmospheric precipitation can only desorb approximately 40.7% of the arsenic in the soil. It would take an additional 16.25 years to bring the arsenic concentration in the contaminated site to the second-level standard limit of soil environmental quality. Under acid rain conditions, the dissolution rate of arsenic can reach 65.4%, and considering the local annual acid rain rate, the arsenic concentration in the contaminated site can meet the second-level standard limit of soil environmental quality within 13.09 years.

Speaker: ZOU Shengzhang

interpore2024 - #274(Poster Presentation).pptx

09:25 Simulation of mobility under mixed wetting conditions in Jimsar shale reservoir

Abstract: The Jimsar shale reservoir contains various rock components such as quartz, dolomite, calcite and feldspar. Laboratory studies have shown that different rock compositions have different wettability. Reservoir wettability is a key factor affecting shale oil production, which controls the flow and distribution of oil and water. Therefore, it is of great significance to perform microscopic simulation of shale oil production under such complex mixed wetting conditions. Based on the OpenFOAM fluid simulation platform, this study established a numerical method for simulation of shale oil mobility under mixed wetting conditions, and used this method to simulate the imbibition process and displacement process for rocks of different lithologies in Jimsar shale reservoir. The changing law of shale oil mobility affected by shale lithology, pore structure, fluid properties and other factors is summarized.

Keywords: The Jimsar Shale Reservoir, Mixed Wetting, Simulation.

Speaker: Ms Huiying Guo (Research Institute of Exploration and Development, Xinjiang Oilfield Company, Petrochina)

09:25 Study on enhanced WAG expanding swept volume technology based on carbon dioxide thickener

Abstract: The low viscosity of CO2 and the non-homogeneity of the reservoir can easily cause early gas channeling in the reservoir, which greatly reduces the sequestration and utilization of CO2, so it is important to study the technology of CO2 -WAG flood to expand the wave and volume in the onshore non-homogeneous reservoir. Therefore, we synthesized a chemical agent for CO2 responsive thickening, which is used to expand the wave and volume of CO2-WAG flood and improve oil recovery. This paper focuses on the fluid and reservoir characteristics of strongly inhomogeneous reservoir in Daqing Aonan. Under the temperature and pressure of the target block, long core driving experiment and two-dimensional non-homogeneous microscopic visualization flooding experiment were carried out, and the effect of CO2 flooding and wave reach efficiency under different flooding methods were obtained, and the laws of CO2 flooding and wave reach and the optimal injection scheme under different injection methods in non-homogeneous reservoirs were summarized. The study shows that: ① the enhanced CO2-WAG flood in non-homogeneous reservoirs can significantly inhibit gas flushing and viscous fingering compared with the ordinary CO2-WAG flood and CO2 flood, and form a piston type stable displacement leading edge, which can significantly improve the oil/gas flow rate ratio. ② Enhanced CO2-WAG flood can improve the recovery rate of more than 8% on the basis of CO2 flood and water flood, and the foam emulsion formed can significantly increase the pressure difference between injection and extraction, and can block the advantageous channels and cracks of gas flood. ③ The enhanced WAG flood can have good utilization effect on the microscopic residual oil in the small and large orifice throats and blind ends, so the enhanced CO2-WAG flood has the highest microscopic sweep efficiency and recovery degree under the other three types of drive replacement (chemical flood, CO2-WAG flood, CO2 flood).
Keywords: enhanced CO2-WAG; non-homogeneous reservoir; different injection methods;

Speaker: Dr Pengwei Fang (Institute of Seepage Fluid Mechanics, Chinese Academy of Sciences,)

09:25 Study on gas-solid particle migration law and ultrasonic response characteristics of multiphase flow in wellbore

This study aims to investigate the migration patterns of gas-solid particles in multiphase fluid within a wellbore, with a subsequent exploration of the ultrasonic response characteristics of gas-solid particles based on these findings. Initially, simulation scenarios were designed using the response surface methodology. Finite element analysis software was then employed for the numerical simulation of coupled multi-physics fields, delving into the migration patterns of gas-solid particles in the annular space near the drill bit.
Simulation results indicate that the density of drilling fluid has minimal impact on the migration speed of bubbles and rock cuttings. As the flow rate of drilling fluid increases, the migration speed of bubbles and rock cuttings proportionally rises. With an increase in bubble radius, the migration speed initially increases and subsequently decreases, while larger rock particle sizes result in a gradual reduction in migration speed. Additionally, observations during the simulation revealed that, upon reaching stable velocities, the speed of bubbles significantly surpasses that of rock cuttings, maintaining a consistent speed differential. Therefore, ultrasonic Doppler methods can be employed for the identification of gas-solid characteristics.
Through Doppler recognition of gas-solid characteristics, analyzing the frequency spectrum and amplitude variations in ultrasonic signals, the results demonstrate the accurate identification of gases and solids within the wellbore. This method holds potential applications in mitigating accident risks, offering valuable empirical and theoretical support to the field of multiphase fluid mechanics.

Speaker: Mr Fuxiang Li (China University of Petroleum East China)

09:25 The emulsification phenomenon of heavy oil in porous media studied by nuclear magnetic resonance method.

Emulsification phenomenon is common in the displacement process of water flooding, surfactant flooding and multiple compound flooding in heavy oil reservoirs. The existence of emulsion can greatly improve the oil displacement efficiency, which has important practical significance for the development of heavy oil reservoirs. However, the description of emulsification phenomenon is basically based on the observation of produced fluid and the monitoring of pressure points along the way. The real emulsification situation in porous media cannot be observed. We have tested and analyzed the emulsification phenomenon of heavy oil in porous media by nuclear magnetic resonance experimental method.
In this study, D-T2 two-dimensional spectrum scanning was first performed on equal volume of free water, water-in-oil emulsion and oil-in-water emulsion. Secondly, the same volume of water-in-oil emulsion and oil-in-water emulsion were scanned by D-T2 two-dimensional spectrum at three different temperatures. Finally, the 60-mesh quartz sand was used as the porous medium, which was filled into the non-magnetic sand filling tube, and the equal volume of water-in-oil emulsion and oil-in-water emulsion were injected respectively. The D-T2 two-dimensional spectrum of the emulsion in the porous medium at different temperatures was tested.
The results showed that the water signal fell on the free water line in the D-T2 two-dimensional spectrum of free water. In the D-T2 two-dimensional spectrum of water-in-oil emulsion, water was limited by the dispersed phase droplets, and the water signal fell below the free water line. In the D-T2 two-dimensional spectrum of the oil-in-water emulsion, the degree of water diffusion was not limited, and the water signal deviated not far from the free water line. The higher the temperature, the formation of water-in-oil emulsion was more conducive, but it would reduce the stability of oil-in-water emulsion. The existence of porous media would make the stability of water-in-oil emulsion worse, and the higher the temperature, the stability of it was worse. However, the presence of porous media would lead to a decrease in the relaxation time of the aqueous phase in the oil-in-water emulsion, and the confined diffusion of the aqueous phase was not obvious under different temperature conditions.
This new experiment provides a new method and theory for studying the emulsification of heavy oil in porous media. And its results can more accurately predict and guide the production of condensate gas reservoirs.

Speaker: Jiajing Chang (China University of Petroleum, Beijing & Sinopec Petroleum Exploration and Production Research Institute, Beijing, China)

09:25 Time-dependent deformation of porous sandstones during pore pressure fluctuations and its effect on porous sandstone properties: Implications for subsurface hydrogen storage.

In underground hydrogen storage operations, reservoir rocks often experience periodic pore pressure fluctuations due to annual or more frequent gas extraction and injection cycles. These fluctuations subject the reservoir rocks to cyclic effective stress changes, causing their mechanical and transport behaviours to differ from those under static conditions. However, understanding how porous rocks react to pore pressure oscillations in situ conditions is still limited. To address this, we selected three types of sandstones with different physical properties (Castlegate, St Bees, and Zigong sandstone, respectively), and conducted pore pressure oscillation experiments over several weeks at different rates and amplitudes to simulate underground hydrogen injection and extraction processes. Permeability was periodically measured during the initial loading phase and stress cycle intervals. 3D images of the samples before and after pore pressure cycling were obtained by performing X-ray micro-computed tomography scans, and digital core models were established to characterise the geometric topological features of the three sandstones quantitatively. Experimental results indicate that all three types of sandstone exhibit more significant increases in axial strain and decreases in permeability than the control groups under constant pore pressure conditions. The strain changes induced by these stress cycles were the primary control on permeability decline in the sandstones. Notably, in the case of the high-porosity Castlegate and St Bees sandstones with porosities of 19.8% and 18.6%, respectively, we observed that both the accumulation of inelastic strain and the decrease in permeability were positively correlated with an increase in the rate, amplitude, and cycles of pore pressure oscillations. In contrast, for the Zigong sandstone, which has lower porosity, there was no obvious correlation among these factors. Microstructural evidence based on CT analysis revealed that the inelastic deformation mechanisms in the three types of sandstones were dominated by grain rotations and rearrangements. However, compared to Zigong sandstone, characterised by its closely packed grains and lower porosity, only 7.9%, Castlegate and St Bees sandstones demonstrated more pronounced changes in pore structure and a more significant loss in porosity. This implies that sandstones with higher porosity, having more space to accommodate grain movements and rearrangements, are more sensitive to rapid pressure changes during cyclic loadings, leading to a more significant response of their physical properties to pore pressure cycling.

Speaker: Mr Ming Wen (Heriot-Watt University)

09:25 Two-phase seepage behaviour of hydrate-bearing sediments at pore-scale studied using a CFD approach

Natural gas hydrates (NGH) are considered as the future clean energy in the era of carbon neutrality 1. Seepage behaviour of gas-water flow in hydrate-bearing sediment (HBS) and its controlling factors is significant for developing effective production strategies. The flow patterns and relative permeability are two crucial aspects of the study on two phase flow in HBS, which are influenced by various factors involving pore structure, wettability, hydrate morphology, and fluid properties. Currently, most research is focused on macroscopic permeability, with limited exploration of the flow patterns of gas and water in the presence of hydrates. Additionally, due to the distinct physical properties of hydrate particles such as wettability and phase change [2, 3], experimental methods struggle to observe the interactions between multiphase fluids and the skeleton (sediment + hydrates). Accurate determination of relative permeability is also challenging [4]. This study aims at investigating the characteristics of gas-water flow in the presence of hydrates and constructing an improved method for determining relative permeability based on CFD methods. In microfluidic chip experiments, the morphology and heterogeneous distribution of hydrates, gas-water flow rates, and the wettability of the skeleton were observed. Based on the information obtained from experiments, a geometric model of HBS is constructed. Subsequently, Volume of Fluid (VOF) algorithm using OpenFOAM is applied for simulating two-phase gas-water flow. A steady-state method based on experimental determination of relative permeability was applied to construct gas-water relative permeability curves in numerical simulations.

Fig. 1a presents the observation of pore-scale hydrate morphology and spatial distribution on the microfluidic chip. Hydrate particles with size range of 5- ~500 μm were observed to form within the pores, indicating a pore-filling type. Fig. 1b is the generated numerical model of HBS. Fig. 1c-d shows the CFD simulation of gas-water flow behaviours in HBS. The influence of hydrate saturation and contact angles on the dynamic distribution of gas and water in pores were investigated. When the water-particle contact angle is small, the gas phase displacement exhibits a fingering pattern, forming distinct preferential flow channels. As the contact angle increases, the gas phase transitions into a discontinuous state, causing some water to be retained within the pores. Fig. 2a depicts the variation of water saturation and inlet-outlet pressure drop over time with steady-state method. Various water saturation are achieved by setting different ratios of inlet gas to water flow rates until reaching the final stable state. The effective permeability of gas and water is then calculated according to Darcy's law (as shown in Fig. 2b).

Fig. 1. (a) CH4 hydrate morphology and spatial distribution on the microfluidic chip. (b) Generated numerical model of HBS. (c-d) gas-water flow patterns in simulations.

Fig. 2. (a) water saturation and (b) inlet-outlet pressure drop over time. (c) gas-water relative permeability curve.

Speaker: Prof. Zhenyuan Yin (Tsinghua Univesity)

09:25 Underground hydrogen storage in depleted reservoirs: flow characteristics through cap rocks

The utilization of hydrogen as a potential player in the energy transition movement requires large-scale storage capabilities. Due to the challenges with aboveground storage of hydrogen, geological storage options have gained attention. Underground storage in salt caverns is feasible, but the associated preparation costs and the disposal of highly concentrated produced brine are high. Alternatively, the abundant depleted gas and oil reservoirs, once de-risked, can provide an attractive solution to address the hydrogen storage requirement. Understanding hydrogen biogeochemical reactions, interactions with reservoir rock-fluids, permeation through sealing rock, and the flow back of stored hydrogen to the surface is essential for designing an underground storage facility in depleted reservoirs.
In this study, we design an experimental protocol to assess the hydrogen mobility in various rock types and the sealing capacity of cap rock formations. A novel and custom-designed core-flooding apparatus coupled with a micro-capillary flow meter is built in-house, enabling the measurement of micro flow rates (as low as 10 nano-Liters/hour) at the core outlet, the measurement of ultra-low permeabilities (as low as 10 nano-Darcy), the gas threshold pressure, and the gas breakthrough pressure. Benchmark experiments are conducted using Nitrogen, and thereafter, the sealing capacity of various cap rocks with permeabilities of different orders of magnitude against CO2, CH4, and H2 is evaluated.
The research results show that both the threshold pressure and the breakthrough pressure of a certain type of cap rock increase with the surface tension of the gas-brine, while for various types of cap rocks, the breakthrough pressure is found to be a decreasing function of permeability and porosity. A scaling law is proposed whereby the threshold pressure for a given reservoir can be predicted if the gas-brine surface tension and the rock formation properties such as permeability and porosity are known. The research outcomes not only shed light on the screening and design of suitable depleted reservoirs for underground hydrogen storage (UHS) but also have guiding significance for the establishment of carbon dioxide geological storage (CCS) and underground natural gas storage (UGS) projects.

Speaker: Prof. Hossein Hejazi (University of Calgary)

09:25 UNDERSTANDING CO2 GEOLOGICAL SEQUESTRATION IN THE DECCAN VOLCANIC PROVINCE THROUGH MULTIPHASE FLOW AND REACTIVE TRANSPORT SIMULATIONS

The current research investigates the possible implementation of CO2 geological sequestration in the Deccan volcanic province. The numerical simulation analysis is carried out to analyse the influences of specific sequestration parameters like the injection rate and injection point; and geological parameters like top surface morphology, petrophysical properties variation, and geological features like stairsteps traps and anticline on the CO2 plume migration in the subsurface formation domain. The effect of these sequestration and geological parameter variations is analyzed on the trapping mechanism, sweeping efficiency and structural integrity over a geological time scale for the considered subsurface synthetic domain. The multiphase, multicomponent reactive transport modeling technique is utilized to conduct this analysis. The outcome of this research has shown insight into the potential implementation of CCS and a future estimate of CO2 migration and CO2 entrapment. Further, provides the impacts of sequestration and geological parameters over a geological time scale. Future studies will focus on caprock leakage analysis, leakage implications on different entrapment mechanisms, and machine learning approaches to predict the entrapment percentage, leakage, and structural integrity research for long geological time scales.

Speaker: Dr Vikranth Kumar Surasani (BIrla Institute of Technology and Science)

10:55 → 11:55 MS01: 3.1

10:55 CO2-enhanced shale gas recovery – Monotonic and cyclic injection

The process of CO2 enhanced shale gas recovery CO2-ESGR seeks to recover the maximum amount of shale gas while simultaneously injecting and trapping CO2 to reduce greenhouse gases. CO2-ESGR has been studied in the laboratory and tested in small field prototypes, however, its commercial feasibility remains questionable. Therefore, more fundamental and experimental research need to be conducted (Nuttal et al., 2005; Schepers et al., 2009).
CO2 enhanced shale gas recovery relies on the preferential adsorption of CO2 and uses pressure gradient to displace and produce methane gas (Hughes et al., 2012; Klewiah et al., 2020). CO2 has a higher adsorption affinity compared to methane gas in shale reservoirs (Weniger et al., 2010; Shi et al., 2019). Competitive gas adsorption depends on the gas type, pressure, temperature, water content, mineralogy, organic content and maturity (Liu et al., 2019). Multiple studies have investigated the competitive adsorption of single-or-mixed gases under static conditions (Heller and Zoback, 2014; Zhou et al., 2018; Sun et al., 2020); however, adsorption-desorption under cyclic conditions remains unexplored.
We explore the interaction between CO2 and CH4 with dominant shale components (clay and organic matter) and natural shale specimens under reservoir pressure and temperature conditions (P=10MPa and T=40C). Experiments are designed to identify the interplay between governing parameters for different boundary conditions. The pressure vessel includes separate gas injection systems; an in-line binary gas analyzer measures the produced gas composition. In this presentation, we compare the methane recovery factor for two different injection protocols: (1) continuous flow injection and (2) pressure cycles. Experimental results show a significant increase in methane recovery efficiency driven by CO2 injection, particularly during pressure cycles.
A parallel numerical model takes into consideration gas advection, adsorption/desorption, diffusion and mixing. This numerical analogue allows to comprehend the interaction between ongoing processes, to develop injection/production protocols that optimize methane production and CO2 storage, and to upscale results to the field.

Speaker: Qi Liu (KAUST)

11:10 OpenWorkFlow - Development of an open-source synthesis-platform for safety investigations in the site selection process

The search for suitable sites for the safe disposal of radioactive waste, a prerequisite for phasing out nuclear energy, is a major scientific, technical and political challenge on which intensive work is being done worldwide. Numerical models for safety investigations for site selection will also play an important role in the endeavour. The OpenWorkFlow project, which was initiated by the Bundesgesellschaft für Endlagerung (BGE), is creating a novel, open synthesis platform for the virtualization of repository systems. The simulation platform will be used both for the evaluation of far-field and near-field processes to support the site selection process and later for the geotechnical design of repository systems. Continuity and innovation are two basic principles of our development philosophy. Through continuous scientific development, the platform will always be at the cutting edge of science and technology and help to shape it. In addition, OpenWorkFlow is developed using the latest IT and digitization methods and the software concept is continuously adapted. As the name suggests, OpenWorkFlow is an open workflow platform, developed as an open source project based on the FAIR principles and an invitation to the community to participate.

Source:
Christoph Lehmann, Lars Bilke, Jörg Buchwald, Nico Graebling, Norbert Grunwald, Julian Heinze, Tobias Meisel, Renchao Lu, Dmitri Naumov, Karsten Rink, Ozan Özgür Sen, Philipp Selzer, Haibing Shao, Wenqing Wang, Florian Zill, Thomas Nagel, Olaf Kolditz (2024): OpenWorkFlow - Development of an open-source synthesis-platform for safety investigations in the site selection process, Grundwasser, in print

Speaker: Olaf Kolditz (Helmholtz Centre for Environmental Research UFZ / TU Dresden)

11:25 Quantifying the multiphase CO2-brine transport in basaltic rocks

Amid intensified global efforts to mitigate climate change, carbon mineralization in basaltic formations has emerged as a more prominent, secure, and permanent storage solution for anthropogenic CO2. When CO2 is injected into basaltic rocks, displacing the in-situ pore fluid, the volume of displaced fluid and, consequently, the injected gas depends on the interplay between relative permeability, capillary pressure, and fluid saturation. However, characteristic flow curves specific to basaltic rocks are limited, emphasizing the need for a deep understanding of this multiphase transport behavior to design effective carbon storage systems. Hence, this study addresses this critical aspect by employing the Lattice Boltzmann Method (LBM) on X-ray computed tomography (XRCT) scans of select basaltic rock samples, capturing the complex internal structures of the basalt. These acquired images are reconstructed into digital models that represent the physical characteristics of the basaltic rocks. We utilized these digital models and LBM, based on the sophisticated Shan-Chen framework to compute key transport properties, including permeability, relative permeability, and capillary pressure. This model enables us to accurately simulate the intricate interactions and dynamics of CO2 transport within basalt under varying temperature and pressure conditions. The comparison of the LBM computational results with the limited experimental data revealed a high degree of correlation, thereby validating the accuracy of our simulations. The strong agreement not only attests to the reliability of LBM in the simulation of geological processes but also reinforces our capability to accurately predict CO2 storage in basalt, further affirming its feasibility as an effective carbon sequestration strategy. Overall, our findings provide valuable insights into the dynamics of CO2 storage in basaltic formations, offering a robust foundation for ongoing efforts and future research that will enhance our ability to combat climate change.

Speaker: Dr Jianwei Tian (McMaster University)

11:40 Visualisation of [11C]CO2 storage in coal with positron emission tomography imaging

CO2 geo-sequestration is a practical approach to achieve net-zero carbon target. Coal has become an optimal geological storage option due to its large adsorptive capability for CO2. However, one of the main challenges for successful CO2 geo-sequestration is the reduced injectivity that are caused by adsorption-induced swelling of coal matrix. In addition, its complex and heterogenous internal pore and fracture structure make the processes of gases adsorbing, desorbing, and transporting more complicated compared with conventional rocks. This work aims to gain insights about the gas transport behaviours in coal by developing a novel experimental framework with Positron Emission Tomography (PET) imaging technology to directly visualise gas flow multiphysics in coal.

PET imaging has demonstrated its capability in providing real-time visualisation of fluids flow in geological materials. However, it has not been used for the study of CO2 injection and storage in coal for the application of CO2 geo-sequestration. To observe the processes directly, [11C] CO2 is the most optimal radiotracer, which is rarely used due to its short half-life (20.4 min) and handling safety issues as a gaseous tracer. In this work, a novel laboratory protocol is developed to use gaseous [11C] CO2 as the radiolabelled tracer to visualise and quantify dynamic processes of gas spreading, adsorption, diffusion, and advection flow in coal under in-situ conditions. The experimental setup integrates core flooding setup with PET scanning. Coal samples are pre-treated to mimic different injection conditions, including coal seam gas reservoirs in early production stage, gas depleted stage and CO2 storage stage. Due to high temporal resolution of PET imaging, time-lapse CO2 gas concentration map of each test is acquired by converting the PET intensity values to gas concentrations. Impacting factors on storage capacity and efficiency are also studied, including permeability, gas adsorption, gas exchange, and initial storage conditions.

This work introduces a new laboratory protocol and analysing framework to quantify sub-core scale multiphysics CO2 flow in coal, which provides a foundation for future across-scale theoretical and experimental study of multiphase and multicomponent flow behaviours in coal for the application of CO2 geo-sequestration.

Speaker: YU JING

10:55 → 11:55 MS03: 3.1

10:55 Phase-field modeling of hydraulic fracture with discrete crack topology

Fluid-driven fracturing plays a vital role in the exploitation of geo-energy sources (geothermal, gas and oil), while also posing challenges for CO2 sequestration and underground energy storage. While the variational phase-field models have shown their power in modeling the involved crack nucleation and propagation coupled with hydro processes, the diffused representation of the cracks impedes the accurate description of the fluid flow in the discrete fracture network and the interplay between the hydraulic and mechanical processes. In this work, we developed a hybrid-dimensional model to realise a staggered description of phase-field fracture in solid media and Reynolds flow in lower-dimensional cracks. This model enables the dynamic reconstruction of 2D or 3D discrete fracture networks (DFNs) based on phase-field point cloud and unconstrained discretisations for solid and fracture domain. To avoid pressure projection when using immerse boundary condition for fluid-solid interaction, a new hydro-mechanical coupling method is proposed and verified with several numerical examples. We demonstrated that this new coupling method is efficient and more favourable when faced with complex DFNs and large-scale parallel computations.

Speaker: Tao You (Montanuniversit\"at Leoben)

11:10 Elementary Slip Solutions for Efficient Geomechanical Simulation of Fractured Rock

The prediction of the permeability enhancement that can be achieved in a geothermal system (EGS) is challenging and computationally expensive because it requires the quantification of distributed frictional sliding and tensile opening in fracture networks with a practically relevant level of complexity. Yet, modelling these processes is indispensable for determining dynamic fracture aperture that is paramount for the predictive simulation of coupled flow, transport, and geomechanical processes in EGS.
Here we model this deformation assuming that the rock matrix is homogeneous and has a linear elasticity behaviour. Single isolated fractures sheared under a compressive stress are assumed to develop an elliptic slip profile, assuming a linear relationship between maximum slip and induced stress. We employ such simplified single-fracture solutions as basis functions in a framework that attempts to predict complex stresses by superposition. To deal with the stress singularities at the fracture tips, a modification of tip stresses is applied, facilitating correct resolution of the traction forces. Since the basis functions are generated numerically, our model is readily extended to include different slip profile shapes and basis functions; for instance, to model the stresses at fracture intersections. Overall stresses are obtained by mapping the set of basis functions to the discrete fracture domain of interest. This stress field reflects the superposition of the far field- and all slip-induced stress fields. It allows to determine the maximum slip and tensile opening value along each fracture based on local force balance constraints and therefore the fracture aperture distribution.
Importantly, our approach allows to dramatically reduce the number of degrees of freedom as compared to the discrete contact mechanics-based simulation of the same fracture geometry. This opens the door to realistically complex coupled flow and transport computations for the performance prediction of EGS.

Speaker: Giulia Conti

11:25 Non-Isothermal Variational Phase-Field Modeling in Hydraulic Fracturing

In this research, we present a novel numerical framework for hydraulic fracturing that incorporates thermo-hydro-mechanical coupled effects. Unlike previous studies that have employed the phase-field method for hydraulic fracturing modeling, our work introduces a THM coupling scheme grounded in the variational phase-field approach, a significant advancement in the field. The THM coupling is crucial for understanding underground fracture propagation, and our study extends the variational phase-field model to a thermoporoelastic medium. This integration enables the inclusion of fluid flow and heat transfer elements in fractured materials. We model fluid flow and heat transfer in the matrix and fracture independently and derive unified flow and heat transfer equations using phase-field calculus. To solve the THM coupled system, we develop an iterative solution algorithm based on the fixed stress method. This algorithm effectively addresses the challenges associated with the coupled system. We discretize the proposed equations using the finite element method and employ a generalized Streamline Upwind Petrov Galerkin method for 8-node elements to mitigate numerical oscillations in advection-dominant issues within the heat transfer model. The accuracy of our model is validated by comparing the numerical results of fracture propagation with an analytical solution under the $\mathcal{K}$ regime. Additionally, we investigate the heat transfer process in a fractured domain, known as the Barends problem, using our model.

Speaker: xiaoqiang wang (USTC)

11:40 Interaction forces caused by relative movement in a continuum mechanical model for suffusion

Dam failures and landslides can be caused by erosional processes. Suffusion, a special type of internal erosion (Yang et al., 2019), is the initial stage of a backward erosion process (van Beek, 2015) which may lead to creeping degradation of the dam’s stability and in the end to catastrophic outcomes like the Brumadinho tailings dam collapse in Brazil 2019 (Silva Rotta et al., 2020). Currently, there are no field-scale models that can predict the time scale of the process and the area of collapse. Only empirical criteria (Chang et al., 2013) can be used to determine whether a soil is erosionally stable or unstable (Fell et al., 2015). New projects could be planned following these criteria. However, some existing earthworks may not meet these criteria and a reliable risk evaluation is not possible. Moreover, for economic reasons, modelling the whole process and, in consequence, predicting the duration of erosion processes may lead to more cost-effective constructions.
To model suffusion at the field scale, the authors are currently researching a continuum mechanical approach. The total soil is modelled with three phases: grain skeleton, water and particles which can be eroded or deposited. These three phases can move independently, and their motion is described by balance equations and constitutive laws. Analog to the effects of suffusion, these laws include the weakening of the soil mechanically. The detachment of particles increases water conductivity, while particle agglomerations impede flow in certain areas, resulting in an increase of seepage forces on the grain skeleton. In a further development of existing approaches by Vardoulakis (2004), the particle diameter is introduced as a parameter. If the particles are very fine and their volume fraction is relatively small, their movement is dominated by advective transport. Consequently, the particles move simultaneously with the water phase. If the particle size is above a certain diameter, friction between particles and water becomes dominant and causes relative motion between these constituents. Additionally, the interaction between the particles and the pore channel of the grain skeleton arises significantly. (e.g., Bear et al., 1987; Schaufler et al., 2012)
A new model based on the Theory of Porous Media (TPM) (Bowen, 1976) represents the mechanical aspects of particle transport through the pore space. Resistivities are defined to represent the interaction forces between the three soil constituents. Observing a special case, the interaction between the soil skeleton and the pore fluid represents the Darcy velocity. The drag force caused by the interaction between particles and pore fluid is also known, but it is typically used for sedimentation and not in combination with the Darcy equation. Additionally, there is an interaction between the particles and the soil skeleton, which has not yet been applied to continuum mechanical models.
Analytical and numerical findings show that the movement of the fluid and particle phases within the pore space can be represented in a continuum mechanical model. The results are plausible for both laminar and non-laminar flow, as well as for different particle concentrations.

Speaker: Solveig Buscher (University Duisburg-Essen)

10:55 → 11:55 MS07: 3.1

10:55 Thermodynamically consistent modeling and simulation of two-phase flow and multicomponent flow in porous media with rock compressibility

In this talk we will introduce a thermodynamically consistent mathematical model for incompressible and immiscible two-phase flow in porous media with rock compressibility. An energy stable numerical method will be introduced, which can preserve multiple physical properties, including the energy dissipation law, full conservation law for both fluids and pore volumes, and bounds of porosity and saturations. Furthermore, an energy-stable and conservative numerical method for multicomponent Maxwell-Stefan model with rock compressibility will also be discussed.

Speaker: Dr Huangxin Chen (Xiamen University)

11:10 Multiscale modeling of multiphase compressible non-isothermal fluid flow in deformable porous media

Understanding the coupling between multiphase fluid flow in pores with distinct sizes and solid deformation induced by flow or external stresses is crucial for the development of many important geotechnics. Most well-established models for describing coupled fluid-solid mechanics are not capable of characterizing hybrid-scale systems containing both solid-free regions and porous media. The recent so-called Darcy-Brinkman-Biot (DBB) framework, which is based on the well-known Darcy-Brinkman equation and utilizes a unique set of volume-averaged partial differential equations, can capture capillary, viscous, inertial, interfacial, and gravitational forces at both the pore and Darcy scales. The solver tends asymptotically to the solution of the two-phase Navier-Stokes equations when used as a pore scale model and to the solution of the two-phase Darcy equations when used as a continuum scale model. Previous extensive tests have demonstrated the versatility of this solver to model multiscale multiphase flow in deformable porous systems, such as fluid-induced material deformation and failure.
In this work, we build upon these previous studies to extend the DBB framework to compressible non-isothermal fluid flow. Through careful addition of new energy conservation equations and pressure equations, we show that this new solver can predict heat transfer in compressible fluids and deformable solids. The model’s numerical implementation, hybridBiotThermalInterFoam, is achieved in the Computational Fluid Dynamics (CFD) software OpenFOAM. This model is then rigorously validated via an example application in the engineered barrier system (EBS) in a nuclear waste repository. Results show that the new solver is capable of predicting fracture propagation and healing in bentonite buffers exposed to strong thermal fluxes and complex aqueous chemistry conditions. The disjoining pressure and complex rheology of the clay matrix are explicitly represented as a function of porosity and salinity. This setting enables the application of thermo-poro-plastic relations to predict the potential for EBS fracturing. Finally, the predictions generated by this model are cross-validated against other existing THMC simulators and experimental measurements. The development in this work creates the first model representing multiphase compressible non-isothermal fluid flow in multiscale deformable porous media.

Speaker: Xiaojin Zheng (Department of Civil and Environmental Engineering, Princeton University, Princeton, NJ 08544, USA)

11:25 A Lagrangian Simulation Framework for Multiphase Flow and Transport in Fractured Porous Media

Particle tracking schemes, including random walk (RW)-based methods, are attractive for modeling advective transport, since they do not suffer from numerical diffusion [Salamon et al. (2006)]$^1$. In scenarios involving multi-species transport, these schemes meticulously capture the degree of spatial mixing across all scales. With such schemes, one can leverage thermodynamic rate laws which when applied to particles in close proximity result in realistic reaction rates. This stands in contrast to classical upscaling-based approaches which assume complete mixing and may not accurately model small-scale variations in reaction rates [Ding et al. (2013)]$^2$.

We present an improved stochastic particle method in the context of multiphase transport in fractured porous media. Our study focuses on limit case scenarios where the microscopic processes, such as capillary diffusion and pore-scale dispersion, do not exert significant influence at the macroscopic levels. For a time-varying system that exhibits a potential solution discontinuity, such as the aforementioned one developing saturation jumps, Lagrangian models may face challenges in producing physically meaningful solutions. Here, we choose a regularization approach based on artificial diffusion/dissipation, and incorporate an adaptive diffusion coefficient. This coefficient is active only in the vicinity of saturation fronts, as is dictated by its saturation-gradient-dependent scaling, which has been conceptualized in Monga et al. (2022)$^3$. Moreover, guided by the vanishing viscosity solution of the 1-D Buckley-Leverett problem, the diffusion coefficient was found to scale with the characteristic speeds of the original hyperbolic system.

We demonstrate that the particle tracking scheme accurately captures sharp saturation profiles in a 1-D Buckley-Leverett reference problem. Subsequently, we analyse the particle-based results in the context of a realistic 2-D fracture network embedded in a permeable matrix. In order to extend the applicability of the proposed regularization approach, isotropic and anisotropic variants of the diffusion coefficient tensor, respectively, are assessed for flow scenarios involving, e.g., gravitational effects and heterogeneity in the matrix. Further application areas include the modeling of physical sub-grid effects, such as dissolution of one phase into the other [Tyagi (2011)]$^4$ and precipitation-dissolution type reactions.

Speaker: Mr Ranit Monga (Institute of Fluid Dynamics, ETH Zürich)

11:40 Quantifying Uncertainty in the Predictive Power of Multi-Scale Pore-Scale Modeling of Complex Microporous Media

In this study, we explore the complex behavior of multiphase flows, exemplified by CO2 movement in underground reservoirs, within the context of heterogeneous porous media such as carbonate rocks. These materials display a wide range of pore sizes, posing significant challenges for imaging-based models due to the inherent trade-off between image size and resolution. Often, finer details are sacrificed in order to capture a comprehensive view of the pore structure in carbonates.
Addressing this issue, our approach involves the detailed analysis of sub-resolution porosity within X-ray images. We employ differential imaging techniques to highlight the differences between dry scans and scans of rocks saturated with 30 wt% KI brine. Building on this analysis, we have devised a novel workflow that integrates this sub-resolution porosity into a network model, using elements we refer to as 'micro-links.' These are based on Darcy's law and link each grain voxel, identified with sub-resolution porosity, to the nearest resolved pores through an automated dilation process.
Our modeling framework extends to both single-phase and multiphase flow simulations, incorporating these micro-links and corresponding empirical models. We have fine-tuned these models to ensure that our predictions regarding effective permeability, formation factor, and drainage capillary pressure are in line with experimental observations. The calibrated model is further employed to predict relative permeability, with a particular focus on quantifying the associated uncertainties.
Moreover, we aim to thoroughly investigate and quantify how microporosity influences fluid distribution and phase behavior within these porous media. This quantification of uncertainty is pivotal in evaluating our model's predictive accuracy and enhancing our understanding of multiphase flow dynamics.

Speaker: Sajjad Foroughi (imperial college london)

10:55 → 11:55 MS10: 3.1

10:55 SEM image segmentation based on deep learning

Image segmentation techniques for processing scanning electron microscopy (SEM) images can enhance the efficiency of oil and gas field exploration. This study initiates by reviewing the limitations of traditional SEM image segmentation methods (threshold-based, boundary-based and region-based), especially the challenges in processing complex structures and high-noise images. Subsequently, the basic principle of deep learning technology in image segmentation is deeply discussed, with a specific emphasis on the superiority of Convolutional Neural Network (CNN) architectures such as Fully Convolutional Networks (FCN) and U-Net in SEM image segmentation research. Finally, the challenges facing the current research are analyzed, encompassing difficulties in data annotation, the enhancement of model generalization capabilities and the processing of multi-modal SEM images. Prospects for future research directions are also put forward.

Speaker: Ziyun Zhang (China University of Petroleum (East China))

11:10 An AI-based method to measure pores in imaging data with Avizo Software

After imaging samples with CT or FIB-SEM, correctly and precisely detecting pores in the digital acquisition requires image segmentation. A series of steps are necessary to be able to correctly process the data. Firstly, a series of filters must be applied to prepare the data for segmentation. Then a segmentation method must be selected. Finally, each detected pore must be measured.

With the use of AI this process is greatly simplified and datasets where segmentation was previously very challenging can now provide pristine results.

Avizo Software already offered a variety of traditional segmentation tools. With the advent of AI, we now offer the possibility to label, train and execute your AI model in a single application to detect and measure the pores in your material.

Speaker: Mr Eric Pui Lam Ho (Thermo Fisher Scientific)

11:25 Inverse gas chromatography, a new technique for correlating surface energy porous media to saturation

Multiphase flow and reactive transport in porous media play a key role in various applications needed for establishing hydrogen as an alternative energy carrier. To successfully establish hydrogen, the porous media facilitating the hydrogen flow in presence of another fluid, needs to be optimized in terms of reactivity and transport properties. Two important parameters controlling reactivity and multiphase flow transport in a porous medium are surface area and surface energies of porous media surface in relation to saturation. In this study, inverse gas chromatography (iGC) is proposed to simultaneously measure surface energy distribution and surface areas of porous media in correlation to saturation.

Inverse gas chromatography (iGC) is a powerful, sensitive, and relatively fast technique for characterizing the physicochemical properties of porous media such as BET surface area and surface energy distribution [1]. In this technique, a single gas, known as probe molecules, is injected into a column packed with the porous sample under investigation. The probe molecules pass through the column, interact with the porous material, and the retention time of the probe molecules is measured at the end of the column. Measuring the retention time for different probes, e.g. polar and non-polar, enables us to determine a wide range of physicochemical properties of the porous material. Recent advances in commercial IGC enable users to perform the iGC measurements at different controlled humidity. Due to the capillary condensation, different relative humidity can create wide range of saturation. By performing classical iGC experiments in these conditions, surface energy distribution and surface area of sample, for the first time, can be correlated to saturation under same experimental conditions. Depending on the degree of hydrophilicity of the sample, water follows different adsorption/saturation mechanisms as relative humidity of experiments increases. In the following paragraph, the expected results of iGC measurements on Teflon samples, representing hydrophobic situation, is discussed.

The water molecules' presence in the system initially adsorb on surface high-energy sites, i.e. polar functional group or cracks on the surface, and then as the relative humidity of experiments increases, based on the competition between cohesive and adhesive forces, water adsorption would continue on either the surface or the initial adsorbed molecules to form clusters [2,3]. In the case of the hydrophobic sample, the water saturation mechanism follows the latter scenario. In this stage, a decrease in polar component of the surface energy is expected (shown in Figure 2). The increase in size clusters as RH increases would result in a slow decrease in measured dispersive component and BET surface area. Clusters continue to grow until they reach to critical size when first stable nanodroplets can form on the surface. The formation of nanodroplets will cause an abrupt decrease in BET surface area and, conversely, increase in the polar component of surface energy due to the formation of stable water surface. As the RH of experiments increases, nanodroplets start to merge and slowly cover the surface, which results in a further decrease in surface area and a slow decrease in surface energy components.

Speaker: Mohammad Hossein Khoeini (PhD candidate at Technical university of Eindhoven)

10:55 → 11:55 MS13: 3.1

10:55 Molecular simulations of Cavitation Bubbles dynamics

The observation of a cavitation bubble forming as a nano-scale spherical surface detached from a flat substrate unveiled complexities in capturing the cavitation pattern, hindered by existing methodological constraints. To decode the molecular dynamics and detailed morphology underlying this phenomenon, the study applies molecular dynamics (MD) simulations. This investigation mapped the onset and early development stages of cavitation at the nanoscale, organizing the morphology into four distinct phases and highlighting a pivotal moment where the rates of nucleation and growth find equilibrium. The research further explores the effects of variable pulling speeds and ambient pressures on the dynamics of cavitation through simulations. It was observed that higher pulling speeds amplify the cavitation volume but reduce the bubble's lifetime. On the other hand, ambient pressure variations significantly influence both the maximum volume and the collapse rate of the cavitation. The findings are systematically encapsulated in a phase diagram that displays the effects of varying pulling speeds and ambient pressures. Significantly, the study corroborates a Family-Vicsek scaling law, predicting the maximum volume and lifetime.

Speaker: Yuequn Fu (University of Oslo)

yuequn-0515.pptx

11:10 Coupled mass and heat transfer model in porous media under high Knudsen number

In the field of oil recovery and other industrial applications, the significance of an accurate and efficient model for porous media cannot be overstated. At present, most of the macroscopic models for the gas flow in porous media at a high Knudsen number are only investigated under pressure gradient. What’s more, the thermal effect becomes prominent in a single tube as the rarefication degree increases whereby mass flow could occur in the direction of inverse temperature gradient, which is named as Transpiration flow. This phenomenon will surely make a difference in the mass transport and heat transfer process in porous media, leading us to determine the mass and heat transport coefficient in porous media under pressure gradient and temperature gradient, as the existing coefficients for mass transport are physically ambiguous and coefficients for heat transfer in porous media are not specified. Therefore, to fully reveal the transport mechanism in porous media under moderately high Knudsen numbers at a macroscopic scale, a novel approach is developed.

Specifically, the analytical solutions of velocity and heat flux to the Poiseuille flow and Transpiration flow in a cylindrical tube by the R13 moment method of rarefied gas theory are first obtained. Subsequently, they are separately incorporated into a three-dimensional pore network model that comprises thirty pores in each direction via newly derived mass flow conductivity and heat transfer conductivity in the form of Knudsen number. As a result, these pore network modellings derive the apparent permeability and the apparent Knudsen diffusion coefficient for mass flow and heat transfer under pressure gradient and temperature gradient respectively. It is found that the above four numerically computed properties fitted with the effective Knudsen number are consistent with their explicitly analytical form in a cylindrical tube. Hence, the analytical form of macro properties is then applied to the macro model for porous media simultaneously subjected to pressure gradient and temperature gradient. Also, a validation of the macro model is made by developing a heat and mass-coupled pore network model under the same boundary condition when the Knudsen number is under unity. To summarize, in this work, a computationally efficient and precise macro model for rarefied gas flow in porous media with the Knudsen number ranging from 0.001-1.0 is established.

Speaker: Shalong Xiong (Technical University of Munich)

11:25 Modelling the Effect of Porewall Heterogeneity on the Phase Equilibria of Fluids in Shale Nanopores

Fluid phase behavior in shale nanopores has become a hot topic in recent years. But, most of the current investigations are based on a smooth porewall assumption. Actually, for such small-scale pores in shale, a serious porewall heterogeneity has been observed, which has been confirmed in many experimental observations.
In this paper, the methods of N2 adsorption and desorption measurement, scanning electron microscope (SEM) and atomic force microscope (AFM) are first applied to characterize the pore structure of shale rocks, and three porewall heterogeneity modes are proposed, including furrowed surface, ravine surface and sinusoidal surface. Simultaneously, the corresponding modelling procedure is developed. Then, through a comparison between the experimental observation and simulation results, the optimal porewall heterogeneity assumption is derived. Thereafter, based on a pore size depended equation of state (EOS), with the consideration of capillary pressure, adsorption layer and fluid-solid interaction, a mathematical model for the fluid phase transition behavior in shale heterogeneous nanopores is established. And the porewall heterogeneity on the fluid phase behavior is discussed.
Results indicate that among the three modes, a sinusoidal porewall assumption is the most recommended one with an average relative error (<2%). Our developed mathematical model can well simulate the fluid phase transition behavior in shale nanopores. Compared with a smooth porewall assumption, a consideration of the porewall heterogeneity can further reduce the bubble point pressure. For pure hydrocarbons, with the pore size reduces and molecule weight increases, the effect of porewall heterogeneity is enhanced. For mixtures, with the fraction of heavy component increases, the deviation between with and without the consideration of porewall heterogeneity is increased.
This paper firstly simulates the effect of porewall heterogeneity on the fluid phase behavior in shale nanopores. It sheds some new insights to understanding the phase equilibria of hydrocarbons in shale play.

Speaker: Xiaohu Dong (China University of Petroleum (Beijing))

11:40 Calculation of CO2-oil minimum miscibility pressure for tight reservoirs considering adsorption effect

CO2 miscible injection holds tremendous potential for enhancing tight oil recovery, where achieving the minimum miscibility pressure (MMP) is crucial. The adsorption of CO2 and oil in nanopores affects the CO2-oil MMP in tight reservoirs, necessitating the precise calculations of nanoscale MMP and a comprehensive understanding of influencing factors. In this work, we employed a modified Peng-Robinson equation of state (PR-EOS) for nanoscale MMP calculations, incorporating adsorption layers and effective molar volume to describe molecular adsorption. Additionally, our improved method accounted for capillarity and critical point shift. The accuracy of this approach is validated against molecular simulations and nanofluidic experiments, with a maximum deviation of 4.61%. We observed that in nanopores, achieving miscibility demands less CO2 than in bulk. The CO2-oil MMP reduces as pore size decreasing, influenced by adsorption, capillarity and critical point shift. At 5 nm, the MMP is 11.12 MPa, 27.8% lower than the bulk value (15.4 MPa). Adsorption intensifies this reduction by curtailing free molecules and effective pore radius, and becomes more pronounced for lighter hydrocarbon mixtures. However, the nanoscale CO2-oil MMP is equal to the bulk value when rp ≥ 350 nm. Furthermore, a maximum MMP and the corresponding transition temperature exist for each pore size, and increase as pore size increasing. This method provides a valuable tool for optimizing CO2 miscible injection and carbon storage in challenging nanoscale-pore reservoirs.

Speaker: Zengding Wang (China university of petroleum (East China))

10:55 → 11:55 MS15: 3.1

10:55 Unsupervised resolution boosting of µCT scans integrated into a supervised convolutional network to predict 3D rock properties

The anticipation of fluid transport behavior within porous media holds significant importance in a diverse array of applications, encompassing subsurface hydrology (Hu and Pfingsten 2023); petroleum industry (Moslemipour and Sadeghnejad 2021), geothermal energy utilization (Meller et al. 2017), and secure subsurface storage of hydrogen or CO2 (Esfandi et al. 2023, Kanaani et al. 2023). Pore-scale properties can be obtained by building a reliable digital twin of porous media through the digital rock physics (DRP) workflow (Sadeghnejad et al. 2022).
Various imaging techniques, such as X-ray computed tomography (XCT), scanning electron microscopy (SEM), and focused ion beam-SEM, have been incorporated into the DRP workflow for capturing rock properties (Sadeghnejad et al. 2021). However, they all are plagued by a well-known battle between scanning resolution and field of view (FoV). When increasing the FoV, scan resolution diminishes, making it unfeasible to obtain high-resolution scans over a large FoV (e.g., laboratory-scale), which could encompass all small-scale heterogeneities. Moreover, direct numerical simulation (DNS) approaches cannot simulate digital twins at the Darcy scale because of their demanding computational power. Consequently, alternative approaches, like integrating deep learning with DRP, offer a more efficient means of estimating rock properties.
In this study, we integrate an unsupervised resolution-boosting algorithm with a supervised convolutional network to predict rock properties from 3D low-resolution micro-CT scans. The semi-supervised approach involves two networks: an auto encoder and a convolutional neural network (CNN). The auto encoder network is trained on unlabelled low- and high-resolution 3D image pairs to enhance the resolution of low-quality images. The dataset comprises 35,680 3D scans of five distinct rock types (i.e., Berea sandstone, Edward Brown Carbonate, Fontainebleau sandstone, and Rotliegend sandstone) captured at two different resolutions. The scans are segmented with a Random Forest classifier algorithm integrated in ilastik, version 1.3.3, (Berg et al. 2019). Subsequently, the latent information from the AE network is combined with a conventional CNN to directly predict the pore-scale properties (i.e., porosity, permeability, tortuosity, and specific surface area) form the low-resolution images. To assess the prediction performance of this coupled network, we compare the predictions with the DNS approach computed by GeoDict 2023 (Math2Market GmbH, Germany) via the R-Squared evaluation metric.
This approach enables us to leverage a small amount of labelled data for the direct prediction of pore-scale properties from cost-effective, low-resolution images. When applied to the validation dataset, the AE-CNN network achieved an R-Squared value higher than that for the CNN not integrated with AE. To assess the model's generalization capability, a new scan from a distinct Berea sandstone sample, which was neither part of the training nor the validation data, was utilized as a test dataset. A noteworthy mean R-Squared increase was observed on the test dataset, when the AE-CNN network was implemented. This outcome underscores the substantial enhancement in prediction performance achieved through the integration of the semi-supervised network when working with low-resolution images of porous media.

Speaker: Prof. Saeid Sadeghnejad (Applied Geology, Institute for Geosciences, Friedrich-Schiller-University Jena, 07749 Jena, Germany)

11:10 Deep learning for microstructure analysis of porous media from image augmentation, and multiscale fusion to image auto-segmentation

Based on deep generative adversarial networks, we present a comprehensive framework for image multiscale fusion and multi-component auto-segmentation, which aims to create a precise digital rock − a key part of Digital Rock Physics to predict the petrophysical properties of porous media. Compared to low-resolution images with a large field of view (FoV), high-resolution (HR) rock images are limited in number and FoV. Thus, we first use a Style generative adversarial network (StyleGAN) to augment LR images. Then, a Cycle-consistent GAN (CycleGAN) is subsequently used to fuse multiresolution images to overcome the inherent trade-off between image resolution and field-of-view, using the unpaired real-world LR/HR images and augmented HR data. It is an efficient approach to enhance LR images over large FoV and reconstruct a 3D multiscale model, eliminating the limitation of super-resolution (SR) relying on paired images. Both HR image augmentation and multiscale fusion are conducted over greyscale images. Consequently, we trained a pix2pix network to realize multi-component auto-segmentation based on the labelled images artificially segmented into multiple minerals, along with their corresponding HR images. The workflow is quantitively validated over shale images at each above-mentioned section through petrophysical properties, such as the porosity (area or volume fraction of different minerals), two-point correlation function, pore size distribution, and apparent permeability, showing that the synthetic HR images and SR images are comparable to the ground truth. The trained pix2pix network can accurately capture the spatial distribution and morphology of different minerals. The proposed workflow provides a reliable pathway to reconstruct multiscale and multi-component digital rocks with large FoV for further pore-scale microstructure properties and fluid flow mechanism estimation, in the field of underground energy development, hydrogen storage, and carbon sequestration.

Speaker: Dr Fugui Liu

11:25 Machine Learning Assisted Numerical simulation of Propylene Glycol-mixed Steam Enhanced Extraction in Unsaturated soils

Contaminated soils with hazardous persistent organic pollutants, such as Polycyclic Aromatic Hydrocarbons (PAHs), present significant challenges for efficient remediation, attributable to their low mobility and bioavailability. The technique of Propylene Glycol (PG)-mixed steam enhanced extraction has emerged as a promising remediation technology, markedly increasing the solubilization and desorption of PAHs through the application of condensed PG and input enthalpy. Despite its potential, a comprehensive understanding of the heat and mass transfer dynamics during PG-mixed steam injection remains conspicuously underexplored, a gap critical to determining the technology’s remediation scope and efficacy. In this study, a compositional two-phase flow model was constructed to elucidate the heat and mass transfer mechanisms in unsaturated soils subjected to PG-mixed steam injection, utilizing the Dumux framework. To account for the chemical equilibrium of water, PG, and air across both gas and liquid phases, the 'feos' toolbox was employed for phase equilibrium and thermodynamic property calculations, enabling the determination of the fugacity coefficients for the various components in the liquid phase. Simultaneously, the behavior of gas-phase components was modeled as an ideal gas. A multi-layer neural network was developed and trained to predict the fugacity coefficients of these components under diverse conditions, including variations in temperature, pressure, and liquid-phase composition. This model serves as a novel approach to provide fugacity coefficients, facilitating the computation of the mole fraction of each component in both phases. Comparative results indicate that the machine learning model substantially enhances computational efficiency relative to tabulated searches for fugacity coefficients. The model yields plausible predictions of temperature and pressure variations, as well as the distribution of water and PG across both phases, surpassing the traditional assumption of an ideal PG-water solution. Subsequent sensitivity analysis will delineate pivotal parameters governing heat and mass transfer during PG-mixed steam injection, identifying critical operational zones. Overall, this numerical model is instrumental in advancing the understanding of PG-mixed steam enhanced extraction processes and serves as a foundational reference for engineering design.

Speaker: Zhixin Chen (Tsinghua university)

11:40 Data Quality Assurance Metrics for Federated Machine Learning

Machine/deep learning (ML/DL) have emerged as powerful tools for driving science innovation. These methods tend to be data hungry, with large volumes that are not likely to be collocated. Further, industry or professional companies typically have a vested interest in keeping their data private. Recent work has shown the viability of federated learning (FL), a ML /DL framework where multiple groups (called clients) collaboratively train a single model without exchanging locally stored, private data. We apply this framework to a problem common in reservoir engineering and digital rocks physics: we use a convolutional neural network with the specific task of predicting the flow velocity field through a porous sample using its segmented x-ray microtomography image as input. The results are nevertheless applicable to any task with spatial data stored across multiple locations participating in training the same model.

As with any typical DL workflow, the quality of the training data plays a key role in the prediction accuracy and the generalizability of a network model. Additionally, the interest in enabling the reusability of these models is guided by the findable, accessible, interoperable, and reusable (FAIR) principles. In the context of FL, the assurance that each client provides quality and representative training data that adhere to the FAIR principles has proven challenging because the data and its metadata remain private.

Here, we first explore how differences in local data can affect prediction behavior once individual models are aggregated. We then propose several preprocessing metrics that can be quickly computed and shared with the central server to assure the quality of the training set but without ability to infer the entire dataset from them. For our specific task of predicting a flow field, we employ common techniques of quantifying pore geometries based on their images. These include, but are not limited to, pore space morphological and topological descriptors, heterogeneity characterization, representativeness quantification, and resolution checks using morphological drainage.

We validate our trained models to test that the proposed metrics properly capture the representativeness of the new training data while still providing sufficient diversity to further the model’s learning. The scope of this work is to show that a set of quality assurance metrics enables model reuse under FAIR principles while maintaining clients’ data privacy during FL. In a broader context, these metrics are also useful for preprocessing classical machine learning training data and in developing constitutive relationships between complex pore geometries and transport properties. Last but not the least, we discuss how we apply this framework with two industry partners.

Speaker: Bernard Chang (The University of Texas at Austin)

10:55 → 11:55 MS17: 3.1

10:55 Domain decomposition physics-data combined neural network for parametric reduced order modelling of fluids

Reduced Order Modelling (ROM) is a widely used method in various engineering such as fluids, porous media, reservoir modelling and so on. This paper proposes a novel domain decomposition physics-data combined neural network(DPDCNN) approach to construct a ROM. In this method, Proper Orthogonal Decomposition (POD) is applied to each sub-domain to reduce dimensionality. Neural network is then used to predict POD coefficients of each sub-domain. The physical equations are incorporated into the loss function. In this domain decomposition method, several additional conditions are enforced at the interferes to ensure the overall continuity of physical solutions such as averaging solutions at neighbourhood, next time levels' values and derivative terms of the PDEs. The performance of this newly domain decomposition method is compared against the model without domain decomposition. The capability of this method is tested using a number of parametric nonlinear problems such as KDV equation in a regular domain, two-dimensional Kovasznay flow, and the two-dimensional Incompressible Navier–Stokes equation.

The results indicate that the proposed methods offer an economically effective means of constructing a reduced model for parameterized PDEs through machine learning. Particularly in specific parameter ranges, especially when distinct physical phenomena regions are prominent, the method outperforms the model without domain decomposition, demonstrating excellent performance on several challenging problems.

Speaker: Xinyu Pan (Tongji University)

MS17_345_Xinyu Pan.pdf

MS17_345_Xinyu Pan.pdf

11:10 Thermo-hydro-mechanical coupled zero-thickness interface finite elements: benchmarking and application

Coupled thermo-hydro-mechanical (THM) processes play a key role in subsurface use, e.g. geothermal energy, CO2/H2 storage and geological repository. However, understanding these processes in porous media, in which natural fractures can be present and new fractures can be induced, is non-trivial task. The Cohesive Zone Model (CZM), a numerical technique in the framework of the Finite Element Method (FEM), is one of the possible choices in modelling fracture initiation and propagation due to its simple physical meaning and its mitigation of the need to calculate the stress singularity at the fracture tips that is commonly challenging in methods based on classical linear elastic fracture mechanics. In this work, we developed a THM coupled zero-thickness interface finite element employing CZM. It is developed to allow the simulation of longitudinal and transversal fluid/heat flow inside the fracture. The cubic law is used to simulate the fracture transmissivity as a function of its aperture, while an elasto-damage law is used to characterise the mechanical response of the discontinuity. The method is successfully verified against two analytical solutions: one of the coupled thermo-hydraulic response of a single fracture, and the KGD fracturing model that describes fracture propagation considering hydro-mechanical coupling. An example is then implemented to show how to simulate thermal fracturing without pre-defined fracture direction using the developed interface elements, and sensitivity analysis is performed against the injection rate and fracture energy.

Speaker: wen luo (Delft University of Technology & RWTH Aachen)

11:25 Coupled Thermal-Hydraulic-Mechanical-Chemical Simulation for Underground Coal Gasification

China, as the world's foremost consumer and producer of coal, portrays an energy landscape marked by an abundance of coal, a scarcity of oil, and a limited presence of natural gas. The collective coal consumption exceeds half of the global total, and there is an expectation that coal will continue to play a predominant role in the energy paradigm for an extended future period. However, a significant portion of China's coal reserves is situated in deep strata, presenting formidable challenges arising from intricate geological conditions. Consequently, the imperative to innovate advanced technologies for the clean and efficient extraction of coal, particularly from deep seams, becomes paramount.
Underground Coal Gasification (UCG) emerges as a viable, sustainable approach for exploiting these deep-seam coal deposits. This intricate process involves multifaceted elements such as heat transfer, fluid dynamics, mechanics, and chemical reactions, posing significant complexities for effective management. While the UCG in deep seams primarily relies on injection and production controls, the lack of transparency hampers the identification of optimal operational parameters. Addressing these intricacies necessitates the development of a comprehensive numerical simulation model that integrates mechanical, fluid, chemical, and thermal dynamics. In this research, we introduce a Thermal-Hydraulic-Mechanical-Chemical (THMC) model employing sequential coupling, further enriched by an interface code linking the reservoir simulator with the geomechanics module. A pivotal component of our investigation centers on discerning the influence of geomechanics on porosity and permeability during the UCG process, alongside evaluating stress distribution within the cavity to assess potential risks of spalling and collapse.
The results elucidate that, during UCG, coal undergoes heating and decomposition, resulting in the formation of coal char. The interaction between the char and the gasification agent initiates a multifaceted chemical reaction, yielding gases such as CO, CO2, H2, CH4, among others. Notably, the temperature within the coal seam can reach a peak of 1500℃, giving rise to the development of a semi-circular cavity. Intriguingly, the boundary of this cavity coincides with the region exhibiting the highest concentration of CO2. It is observed that as the injection pressure and flow rate of the gasification agent increase, there is a corresponding rise in the amount of syngas calorific value and CO2, along with the amount of coal processed per unit time. However, this increase ultimately diminishes the energy conversion efficiency of coal gasification. The composition of the gasification agent emerges as a pivotal factor in the UCG process. For example, water has the capacity to augment the rate of coal consumption, promote CH4 production, and elevate the calorific value of the syngas. Nevertheless, an excess of water can lead to a reduction in operational temperature, impeding the generation of high-calorific syngas. Furthermore, the presence of CO2 in the gasification agent can augment CO production without adversely affecting the properties of the syngas. In the upper reaches of the cavity, stress concentrations are discernible, with shear stresses registering several times higher than their initial levels. This phenomenon induces deformation around the cavity.

Speaker: Zhuocheng Hu (China University of Petroleum (East China))

11:40 The HiPerBorea project: permafrost modeling from the pore scale to the headwater catchment scale with open source, high performance computing tools

This presentation aims at giving an overview of the porous media related activities of the HiPerBorea project, an ANR-funded project in its 5th and last year. The objective of this project is to enable quantitative and predictive modeling of the evolution under climate change cold regions hydrosystems. Arctic and sub-arctic areas, which are highly vulnerable to global warming, are largely covered by permafrost – soil that is year-round frozen at depth. Permafrost-affected areas, which represent 25% of emerged lands of the northern hemisphere, are prone to major biogeochemical and ecological transformations due to permafrost thaw, with strong associated feed-backs on greenhouse gas cycling (degradation of previously permanently frozen organic carbon pools).[1] Permafrost thaw has also important impacts on local populations and activities, for instance by generating soil instabilities which damage infrastructures above[2]. In order to anticipate these major changes, there is a need of modelling tools of permafrost dynamics, i.e. of heat and water transfer in variably saturated and variably frozen soils. The considered porous media are constituted of four phases, the solid phase, the liquid water phase, the ice phase and the air phase. The freeze/thaw processes induce large and abrupt variations of the transfer properties of the porous media, such as hydraulic conductivity or thermal conductivity. Then the numerical resolution of this strongly coupled and non-linear problem requires fine spatial and temporal discretizations, and thus large computation times.[3] To tackle this issue, HiPerBorea develops and uses the cryohydrogeological simulator permaFoam, an OpenFOAM solver for permafrost modelling,[4],[5] aiming at quantifying the permafrost evolution under climate change at the headwater catchment scale.[6] Meanwhile, in order to assess the transfer properties of the porous media relevant to permafrost dynamics, pore-scale studies on water and heat flow are conducted using tomographical observations and direct numerical simulations as well as pore-network modelling.[7] The main outcomes of the HiPerBorea project will be presented, and open questions related to the upscaling of numerical results from the pore scale to the headwater catchment scale will be put forward. Finally, the perspective of applications of the developed approaches will be discussed.

Speaker: Dr Laurent Orgogozo (Geoscience Environnement Toulouse (GET), CNRS, UMR5563, Toulouse, 31400, France)

12:00 → 13:00 MS01: 3.2

12:00 CO2 storage capacity in saline aquifers and uncertainty sensitivity analysis

Abstract: The emission of greenhouse gasses, especially carbon dioxide (CO2) is a major contributor to the global climate and the ecological environment. Geological storage of CO2 in deep saline aquifers is currently a widely recognized method with its stable storage and strong feasibility. However, researchers focus on the CO2 storage in saline aquifers, and there are few studies on the factors affecting the long-term stable storage of CO2 in brine. Therefore, the purpose of this study is to develop a long-term storage model and evaluate the performance of CO2 storage potential. First, we applied PC-SAFT (Perturbed-Chain Statistical Associated Fluid Theory) equation of state in phase equilibrium of CO2-H2O system. Results were validated against experimental data, indicating that PC-SAFT can well describe the phase behavior. Relevant property parameters of CO2-brine mixture were then modified and incorporated in the numerical simulation model. After that, the migration and distribution of CO2 stored in deep saline aquifers were simulated, examining the contribution of each mechanism over a 1000-year time scale. The correlations between reservoir temperature, residual gas saturation, horizontal permeability heterogeneity, the ratio of vertical to horizontal permeability, and pH were analyzed using Spearman’s rank correlation coefficient method. Five storage efficiency indexes, including the Stratigraphic Trapping Index (STTI), Residual Trapping Index (RTI), Solubility Trapping Index (STI), Mineral Trapping Index (MTI), and Stable Trapping Efficiency (STE), were utilized as output parameters. The results indicate that different factors have varying degrees of influence on storage efficiency at different monitoring periods and mechanisms. Residual gas saturation is the main controlling factor for STTI, RTI, and STE at 100 years. At 500 years, the ratio of vertical permeability to horizontal permeability becomes the primary controlling factor for STI, and pH emerges as the dominant factor for MTI at the 1000-year mark.
This study provides a theoretical basis for evaluating CO2 storage potential in saline aquifers and selecting the optimal storage reservoir.
Keywords: Saline aquifers, CO2 sequestration, PC-SAFT, Storage capacity, Correlation analysis

Speaker: Lishijia Han (China University of Geosciences (Beijing))

12:15 Parallel numerical simulation analysis of the stress evolution within the full synthetic field model during CO2 geological storage

The mechanical analysis and stability assessment of reservoir-caprock systems are critical considerations for the successful industrial implementation of CO2 geological storage. Injecting CO2 into the formation can cause fluid pressure accumulation, altering the effective stress field and subsequently leading to potential geological risks. Stress changes due to CO2 injection can activate faults, induce seismicity, and ground motion. However, the influence of stress change is not limited to the reservoir alone but extends to the broader subsurface formations including the overlying caprock, underlying basement, and the surrounding strata.
In this study, a full synthetic field model incorporating the reservoir, caprock, basement, and surrounding formation was established. A finite element grid was generated based on the existing corner point grid of the target reservoir. Using parallel computing, numerical simulations of coupled flow and geomechanics were conducted on a million-grid scale model to analyze the variations in effective stress during CO2 injection and storage. The simulation results indicate that during the injection stage, fluid pressure and shear stress gradually increase with time, while the average effective stress decreases, indicating a shift towards the failure envelope. After the cessation of injection, the stress state reverses but remains on the left side of the initial stress state. Fluid pressure and shear stress are higher than the pre-injection equilibrium values, while the average effective stress is lower. Increasing the number of CPU cores significantly reduces the computation time of the numerical simulations. However, beyond a certain number of cores, the overall parallel computation time increases due to increased communication burden among processors. As the size of the solving model increases, the acceleration ratio and parallel efficiency increase under the same number of processors.

Speaker: Enyi Yu (Peking University)

12:30 Feasibility of injecting CO2 into low-permeability gas reservoirs to enhance gas recovery

Natural gas resources in tight sandstone are huge, but the gas production rate decreases rapidly and the gas recovery rate is low due to poor reservoir physical properties. Injecting CO2 when the gas reservoir is depleted can enhance gas recovery and simultaneously sequestering a large amount of greenhouse gases, which has significant economic and environmental benefits. To fully understand the production mechanism of the CO2 flooding process at the field scale and evaluate the technical feasibility, a mathematical model is established to study the dynamic behavior of the method in this work. Based on the geological data of the Sulige gas field in the Ordos Basin, a 3D numerical simulation model of CO2 flooding in tight gas reservoirs under the five-point well pattern is established. The production dynamic behavior of enhanced gas recovery and CO2 storage processes is studied through numerical simulation approach. Moreover, the impact of engineering and geological parameters on production performance is discussed, such as perforation strategy, CO2 injection rate, permeability, porosity, diffusion coefficient, residual water saturation, reservoir thickness, etc.
Results indicate that the CH4 production rate is significantly increased after CO2 flooding, and the gas recovery can be increased by up to 19.2%, confirming the feasibility of CO2 injection technology to enhance CH4 production in depleted tight gas reservoirs. According to the spatial distribution characteristics of the components, the reservoir can be divided into CO2 zone, CH4-CO2 mixed zone, and CH4 zone. Although a CO2-CH4 mixing zone is formed due to diffusion, there was no significant mixing in the reservoir, ensuring the purity of natural gas in the production wells. Once the CO2 breakthrough occurs, the CH4 production rate decreases rapidly, and the spatial distribution of CO2 is only slightly affected by the gravity difference of the components. These characteristics are significantly different from those of high-permeability gas reservoirs. The CO2 front in the early stage of flooding is proportional to the square root or cube root of time, depending on the perforation location and reservoir thickness. However, the CO2 front in the late flood stage shows a linear relationship with the square of time. It is recommended that injection well and production well be fully perforated in the gas interval because the enhanced gas recovery is higher than other perforation options and excessive bottom-hole pressure in the injection well can be avoided. As the permeability increases, the CO2 breakthrough time becomes shorter, and the CH4 recovery increases, resulting in less CO2 buried in the reservoir. The diffusion coefficient has a significant impact on production dynamics. The larger the diffusion coefficient, the wider the mixing range of CH4 and CO2, which accelerates the CO2 breakthrough and leads to low CH4 recovery.

Speaker: Dr Ermeng Zhao (Peking University)

12:45 Evaluating the Material, Energy, Environmental, and Economic Aspects of Pan-European CCS Infrastructure

Carbon capture and storage (CCS) holds immense promise for mitigating climate change, but its full potential remains largely untapped due to challenges in sourcing CO2 and constructing an extensive infrastructure across Europe. To address these limitations, we present a workflow and an open-source Python package that assesses the material, energy, environmental, financial, and operational aspects of pan-European CCS networks. Our tool leverages a spatial map of European emitters based on the E-PRTR database, incorporating flue gas composition information to tailor capture techniques to each emitter's industrial sector and proximity to existing or potential pipelines and storage sites.
Our computational model employs a Graph data structure to construct a network that connects emitters along existing European gas pipelines and power cables, simulating potential future pipeline routes. Multiple transportation routes, represented as Directed Graphs, link emitters to subsurface storage sites in the North Sea. The tool performs detailed sizing calculations for pipelines, designs compressor and pumping stations and temporary storage tanks, and calculates compression energy and cost for subsurface storage. Energy consumption is determined based on process models, and correlations are applied for capital cost estimation. Operating costs are projected using the spatial cost of fuel and electricity across Europe. A multistep approach to database analysis and design and energy analysis steps ensures the computational efficiency of the package for sensitivity analyses and case studies for minimizing cost and energy demand.
Preliminary results from our model indicate that a German-Danish CCS network, with storage in depleted Danish North Sea reservoirs, will demand electricity and heat equivalent to two- and one-fold Danish consumption, respectively. This network, connecting emitters with annual emissions exceeding 50,000 tons, is projected to store approximately 350 Mt of CO2 annually. However, due to the carbon intensity of the grid and heat, this network will also emit an equivalent of 30% of the stored CO2. A substantial capital investment exceeding EUR 90 billion, primarily allocated to pipeline construction, is anticipated. An annual operating cost ranging from EUR 6 to 18 billion, depending on electricity prices, is also projected.
Our software is distinguished by its utilization of updated emitter databases, fundamental process models, and state-of-the-art efficiency factors and costs provided as process equipment databases. These features minimize user input and ensure realistic network design and accurate estimations of environmental footprints, energy demand, capital, and operating costs, facilitating informed planning and decision-making by taxpayers, investors, operators, and policymakers.

Speaker: Ali Eftekhari (Technical University of Denmark)

12:00 → 13:00 MS03: 3.2

12:00 Non-Local Flow Description for Non-Space-Stationary Fractured Formations

Flow in fractured porous media plays an important role in applications ranging from geothermal energy production to the selection of suitable underground CO$_2$ storage sites. Predictions of flow and transport are central in these applications and often times corresponding models are applied that rely on effective permeabilities. In subsurface formations, where fractures extend over distances comparable to the scale of interest, such models are no longer suitable. As an alternative, a model based on conductivity kernels has recently been proposed. This model accounts for the non-local character of long-range flow conduits or fractures leading to a description, which is based on an integro-differential equation. In this work, this model is extended for non-space stationary fracture statistics with model predictions being successfully compared against fracture-resolving reference simulations.

Speaker: Shangyi Cao (ETH Zürich)

12:15 Modeling of micro-particle transport in supercritical CO2 over rough fractures

SC-CO2 (supercritical carbon dioxide) has attracted much attention in subsurface engineering process, such as CO2 sequestration, enhanced oil recovery and geothermal development. Using micro-particle as proppant in SC-CO2 fracturing is a new fracturing technology in unconventional oil and gas reservoirs. Despite the multiphase flow of SC-CO2 in porous media has been widely studied in recent years, the transport of micro-particles in SC-CO2 over fractures still need further research.
In this study, a coupled computational fluid dynamics and discrete element method (CFD–DEM) approach is used to study the transport behavior of micro-particles with SC-CO2 over rough natural fractures. Rough fracture geometries are generated with the geostatistical simulator Synfrac. The difference in the particle transport characteristics between SC-CO2 and slick-water are demonstrated. The effects of fluid properties, particle parameters, and fracture morphology on micro-particle carrying behaviors in rough fractures were discussed. Results show that particle-carrying performance depends on fluid viscosity and flow rate. Larger critical settling velocity of particles in low viscosity SC-CO2 leads to the formation of sand dune at the bottom of fractures. Micro-particles are prone to form a multi-layer’s sand dune with high particle concentration. Also, the presence of vortices in SC-CO2 around a rough fracture surface leads to the suspension of micro-particles, particularly when the flow field is subjected to high injection rate and high Reynolds number. This ultimately results in a wider distribution of micro-particles in SC-CO2 within the fracture compared to water. Due to the particle accumulations on the sand bed surface, fracture apertures is reduced and leads to fast flow velocity. The turbulent flow regions of CO2 fluids are generated. In the vicinity of high Reynolds flow regime, the flow field enhances the suspension capacity of particles. Turbulent flow at fracture junctions helps to deliver particles into deeper and farther of natural fractures in low viscosity SC-CO2 fluids by disturbing the movement of sand dune. The overall findings provide a greater understanding of transport behaviors of micro-particle with SC-CO2 over rough fractures underground.

Speaker: Qianqian ZHOU

12:30 Visualization and Quantification of micro-particle transport in rough fractures

Particle transport in rough natural fractures has seen diversified potentials and applications in environmental engineering and resource development engineering.
Despite intensive and outstanding research on their transport phenomena, the impact
of surface attachment and confined space of rough natural fractures on particle
transport remains poorly understood.
In this study, we constructed a 3D-printed rough fracture model to investigate
the transport behavior of micro-particles within the rough fracture. Here, we develop
a particle transport imaging system using silica micro-particles coated with
fluorescence material, in conjunction with a Particle Image Velocimetry (PIV) system.
We investigated the transport and settling behavior of fluorescent micro -particles in
several rough fracture models under different fluid injection rates, and fracture
roughness. The experimental results revealed that as the surface roughness of a
fracture increases, the particles tends to settle more rapidly near the entrance of the
fracture. This phenomenon substantially diminishes the lateral transport of the
particle within the fracture, leading to a swift accumulation and consequent plugging
at the entry of the fracture. Notably, even with a increased fluid injection rate, the
rough fracture are not entirely obstructed by the clogging of particles. The overall
findings will shed light on understanding clogging and deposition characteristics of
particles in subsurface rough natural fractures.

Speaker: Yaochen Zhang (China University of Petroleum-Beijing)

12:45 Homogenization of flow and solute transport in fractured media using hybrid upscaling method

Abstract:

Fractured media can be found in various natural and engineering systems, and the presence of fractures and fracture networks has a significant impact on the flow and transport processes at different scales. However, the complex nature of fractures poses challenges for theoretical modeling and numerical analysis. In this study, we propose a new hybrid upscaling workflow that combines analytical solutions at the continuum scale with fracture network methods. This method aims to preserve the connectivity of the fracture network and account for the interactions between fractures and the surrounding matrix. To validate the effectiveness of the new method, we compared its results with pore-scale simulations. Additionally, we investigated the influence of factors such as permeability, fracture aperture, porosity, and pore structure on the media. Through rigorous accuracy analysis and parameter studies, we assessed the applicability and computational efficiency of the proposed upscaling method.

Key words: fracture network; flow and transport in fractured media; Hybrid upscaling method

Speaker: Yujie Wang (North University of China)

12:00 → 13:00 MS06-A: 3.2

12:00 Interpreting Pore-Scale Fluctuations: Predicting Transport Coefficients in Multiphase Flow through Porous Media Using the Green Kubo Formulation - An Experimental Investigation

Pore scale fluctuations during multiphase flow in porous media have been observed over the past decade particularly at capillary dominated flow regimes. While multiphase flow in porous media is typically predicted using models that employ average properties, the current models do not incorporate these fluctuations at the pore scale. It therefore remains unclear how flow fluctuations can be integrated into existing models and to what degree they are related to energy dissipation.
Herein, we study pore scale fluctuations during steady state multiphase flow using the concept of non-equilibrium thermodynamic and statistical mechanics. We investigate, for the first time, how the Green Kubo formulation of the fluctuation dissipation theorem (FDT) can be used to predict the transport coefficient from the two-phase extension of Darcy’s law. Flowrate-time series data are recorded at the millisecond time scale using a novel experimental setup that allows for the determination of flow fluctuation statistics. Steady state coreflooding experiments were conducted using DI water and decane as the wetting and non-wetting phase. A water fractional flow of ~0.5 was used while varying the total capillary number, Ca. By using Green Kubo relations, a transport coefficient is predicted based on the integrated autocorrelation function (ACF). The transport coefficient using conventional Darcy’s linear law was also compared with the FDT approach.
Notable fluctuations were observed at all Ca studied. A linear relationship between average flux and pressure drops was observed at the lowest Ca. Hence, obeying Darcy’s law. At higher Ca but still within capillary dominated flow regime, there was a systematic deviation from the linear trend. Thus, a non-Darcy behaviour was observed. Statistical frequency analysis of the flow fluctuations further shows non-Gaussian feature, that is more pronounced at the lowest Ca. By using Green Kubo relations, a transport coefficient is predicted based on the integrated ACF. Notably, this coefficient aligned closely with the total effective phase mobility computed using Darcy's equation for multiphase flow, particularly in scenarios where a linear relationship between flow rate and pressure gradient was observed. We provide the first experimental evidence of using FDT to determine transport coefficient during multiphase flow in porous media.
Our results open a new application for nonequilibrium thermodynamics where microscale fluctuations during multiphase flow are directly linked to macroscale parameters. Establishing a connection between these fluctuations and macroscale parameters is pivotal to understanding energy dissipation during multiphase flow and associated modes of transport.

Speaker: Umar Alfazazi (School of Civil and Environmental Engineering, University of New South Wales)

12:15 Pore-scale modeling of multiphase flow in porous media with particle migration

Multiphase flow in porous media with moving particles is common in many natural and industrial processes, such as low-salinity water-flooding, sand production, and microbial enhanced oil recovery, etc. With complex interactions between fluids, particles and pore surfaces, the flow behaviors in such systems are often distinct. To understand the effects of particle migration on multiphase flow in porous media, a direct numerical simulation study is conducted. In this study, Navier-Stokes equation is coupled with discrete element method (DEM) by directly calculating fluid-particle interaction forces. The volume of fluid (VOF) method is used to capture the evolution of the immiscible two-phase interface. Contacts between solid particles and pore walls with arbitrary topology are modeled by the contact laws. This study demonstrates that particle migration significantly alters the well-known characteristics of two-phase displacement, such as viscous fingering and capillary fingering. Particle plugging in the pore throat compels the invading fluid to enter larger pores, resulting in a higher sweeping efficiency. The role of particle density, injecting velocity, surface tension and other parameters are systematically analyzed. Finally, a mathematical model is established to describe the effects of particle migration on multiphase flow in porous media. The established model is validated against microfluidic experiments.

Speaker: Yuanping Li (China University of Geosiences (Wuhan))

12:30 A microfluidics investigation of the impact of microfractures on flow patterns in porous media during imbibition

The imbibition in porous media plays a critical role in various natural and engineering processes, such as rainfall infiltration, hydrocarbon recovery, geological CO2 storage, and environmental remediation. Microfractures and discontinuities are naturally presented and purposely induced in natural rocks and soils. The interaction between these heterogeneities and the matrix increases the complexity of multiphase flow behavior in porous media.
This study aims to investigate the impact of microfractures on flow patterns in porous media during imbibition and understand the pore-scale fluid interaction between microfracture and matrix via microfluidics experiments. Polydimethylsiloxane (PDMS) micromodels of fracture-matrix porous media with various fracture widths are designed and fabricated using the soft lithography technique. The width of the matrix channels follows a lognormal pore-size distribution with a mean size of 30 and a standard deviation of 0.4. The width of the fracture varies from 4 to 40 times the mean pore size (120 μm to 1200 μm). The depth of the channel is around 110 μm. We inject ethanol as the wetting phase to displace air at various flow conditions (constant flow and constant pressure). A pressure transducer at the inlet monitors the pressure change, and a fluorescent microscope records the flow behavior. The effect of different microfracture geometries on flow patterns during imbibition at various flow conditions is analyzed.
Results show that the flow pattern is matrix-prefer when the injection flow rate is low. The ethanol prefers to invade the matrix, and the fracture acts as a capillary barrier. The flow pattern transfers from matrix-prefer to the transitional stage as the flow rate increases. The liquid equally invades the matrix and fracture area. The interaction between fracture flow and matrix flow is observed. Eventually, the fracture becomes a preferential channel at high flow rates. The capillary barrier and preferential channel phenomena are less salient for narrow fractured porous media, whereas they become more significant as the width of the fracture increases. The recorded pressure signatures reveal that the interplay between capillary and viscous forces results in different flow patterns during imbibition. The capillary force dominates the flow behavior at low capillary numbers and imbibes the wetting phase into the matrix. Fractures act as capillary barriers when the fluid pressure is smaller than the entry pressure. The viscous force dominates the flow behavior as the capillary number increases. The wetting phase invades the low-viscous drag fracture and the cross flow between fracture and matrix is limited.
In conclusion, we observe three flow patterns in fractured porous media during imbibition and identify two thresholds for these patterns. The interaction between fracture flow and matrix flow is analyzed at the pore-scale, Results presented in this study are relevant to the understanding of multiphase flow phenomena in fracture-matrix systems at various flow conditions.

Keywords: Microfracture, heterogeneity, imbibition, microfluidics, flow pattern, porous media

Speaker: Bowen Zhang

12:45 Experimental and numerical studies of spontaneous imbibition in sandstones

Spontaneous imbibition (SI) driven by the capillary force is pivotal to diverse earth science applications. To elucidate the interplay between capillary and viscous forces during spontaneous imbibition in porous media, the pore-network model proves to be an efficient tool. We initially verify our dynamic pore-network model against a series of water-air spontaneous imbibition experiments on three sandstones with distinct pore structures, which can be established under both constant and distributed contact angles. We then compare spontaneous imbibition with reduced viscosity ratios and quasi-static imbibition. However, we observe discrepancies in pore-filling events and the associated average transport properties under these two wettability conditions, leading to disparate imbibition rates and wetting saturation at lower viscosity ratios. Furthermore, when comparing spontaneous imbibition experimental data across a spectrum of nonwetting phase viscosities from the literature, we find superior model fitting with a constant contact angle. Although recent findings suggest that contact angles in pore spaces tend to follow a lognormal distribution, such a distribution may not be appropriate for the pore-network model with already simplified geometric pore characteristics. Our research also indicates that the correspondence in imbibition rate and wetting saturation against experiments at each viscosity ratio is the definitive validation criterion for the pore-network model of spontaneous imbibition.

Speaker: xin wang

12:00 → 13:00 MS07: 3.2

12:00 Bridging Microscale Physics to Macroscale Models in Confined Porous Media

Tight subsurface formations and shales often act as seals for subsurface systems that are envisioned to store fluids such as CO2 and H2 as part of a transition to low-carbon economies of the future. These seals often comprise complex nano-confined systems with heterogeneous physical and chemical features. The extreme confinement and heterogeneity in such systems present difficulties in terms of scale separation in modeling efforts. We aim to address this challenge by developing a scale translation framework that bridges the dominant physics at the microscale to model systems with complex geometries featuring a host of flow regimes. The scale-translation framework uses an optimized implementation of a multi-grid lattice Boltzmann method (MG-LB), capable of simulating complex pore networks that feature wide ranges of Knudsen numbers. The simulator is optimized using hash tables, indirect addressing, and parallelization techniques, extending the reach of the simulator to large and complex domains. The modeling tool generates a dataset of flow behavior in complex porous media, which is used to train a Machine Learning model, specifically, a deep neural network (DNN). Features of the pore networks, such as connectivity of the pore structures and pore size distributions, serve as input and the resulting DNNs estimate the transport properties in computational domains beyond the reach of the MG-LB models. The estimates will inform the macroscale properties of large-scale and heterogeneous, confined porous media.

Speaker: Dr Saman Aryana (University of Wyoming)

12:15 A lattice Boltzmann based Darcy-Brinkman-Stokes method for micro-continuous two-phase flow

The transport of immiscible two-phase in porous media involves many scientific and engineering fields, such as hydrogeology, reservoir development and electrochemical energy storage. This kind of flow phenomenon usually occurs in multiscale pores from micro to macro, making direct numerical simulations suffered from huge computational costs. Considering the demand for simultaneously mimicking both porous Darcy flow at micro-continuum scale and free Stokes flow at pore scale, the Darcy-Brinkman-Stokes (DBS) method based on volume-averaged Navier-Stokes (VANS) equation is established recently and it has made great contributions to study seepage flow and imbibition phenomenon in multiscale media [1,2].

Lattice Boltzmann method (LBM), as a mesoscopic numerical technology, has achieved great progress for complex multiphase flow in porous media. Thus, the combination model of LBM and DBS has significant advantages in multiscale flow simulation compared to traditional scheme (FVM, FDM), e.g., it is able to capture the discontinuity of velocity gradient at free-porous interface, and does not need data transmission and special boundary treatment between regions with different scales.

In our work, the improved color-gradient model [3] and a novel volume averaging technique [4] have been applied, which considers the streaming of effective densities, a forcing term for pressure correction and a source term for error correction for two-phase’s density ratios. By adding a total force term in moment space including continuum surface force, drag forces induced by porous matrix, we have correctly recovered the multiple-relaxation-time (MRT) LB equation to VANS equation through Chapman-Enskog analysis, and thus a multiphase DBS-LBM model has been newly-established. Meanwhile, a capillary force containing a numerical interaction parameter is implemented to mimic the apparent wettability in the spatially-distributed porosity field within micro-continuous porous areas. The standard validations have confirmed the accuracy and robustness of this new model, such as its flexible adjustability for interfacial tension and relatively low spurious currents, as well as it has good physical continuity at free-porous interface and stable numerical performance, especially in terms of simulating fluids with density/viscosity ratios. Besides, through the static droplet and dynamic capillary effect tests, the proposed interaction force has been demonstrated to be effective for trans-scale simulation of immiscible two-phase’s transport and sorption behavior in multiscale pores.

In future study, developing this model to 3D is practical and straightforward, it will allow to simulate a larger multiscale structure at domain scale actually, where the parameters of micro-continuous porous areas can be obtained from grayscale CT scanning and experimental correlation. Moreover, a temporally varying porosity field can be incorporated by coupling the governing equations of solid components to simulate flow-structure problems in soft matter or particle clusters.

Speaker: Mr Yang Liu (Tsinghua University)

12:30 Fully coupled implicit discretization for large-scale simulation of miscible multiphase flow in heterogenous porous media

To comprehensively understand and predict the behavior of CO2 storage, the development of precise mathematical models and advanced numerical schemes for large-scale simulations is demanding. The advection and diffusion or even interaction between injected supercritical CO2 and other fluids in the storage reservoirs should be able to be described by multiphase flow models. Notably, the consideration of CO2 dissolution introduces dynamic changes in the density of fluid phases, instigating density-driven flows. Most discretization schemes are explicit or semi-implicit which restricts the time step size of the simulations. In this work, a fully coupled and fully implicit scheme for large-scale simulations of miscible multiphase flow in heterogeneous porous media is proposed. Vertex Centered Finite Volume Method is employed for the spatial discretization. The linearly implicit extrapolation method (LIMEX) is adapted for temporal discretization. The arising linear system of equations is solved by BiCGSTAB with Geometric Multigrid (GMG) preconditioner. The parallel implementations are based on the open-source software: UG4. The validation of the proposed scheme is verified by the comparisons with analytical solutions in benchmark cases. The weak and strong scaling tests are performed on the supercomputer Shaheen II with up to 4096 processor cores. Due to the stable numerical treatment and efficient implementation, the proposed scalable solution is suitable for large-scale simulation over long periods.

Speaker: Shuai Lu

12:00 → 13:00 MS10: 3.2

12:00 Darcy-Scale Image Analysis for laboratory CO2 storage and fracture flow

Imaging has always played a vital role in obtaining a better understanding of porous media processes through laboratory experiments. In contrast to pore-scale imaging, extracting Darcy-scale interpretation from porous media experiments has so far not drawn equally big attention. On the other hand, various imaging techniques used in the lab often do not offer pore-scale resolution, e.g., CT-PET, MRI, or optical images. Targeting the dedicated processing of image data from aforementioned sources in a unified way, a new software package has been developed to enable both qualitative and quantitative research based on experimental data: DarSIA (short for Darcy-Scale Image Analysis) [1]. It provides unified input capabilities for various data types as well as a range of preprocessing tools, upscaling routines, and multi-image comparison tools allow for direct comparison. To mention two examples, such include tools to e.g. quantify the pointwise mechanical deformation in terms of a displacement map; and measure the disparity between two fluid configurations in terms of Wasserstein metrics and associated optimal transportation maps. Moreover, DarSIA provides I/O for simulation data formats and thus conventiently allows for bridging computational and experimental research.

In this talk, we present the philosophy behind DarSIA, and showcase its application for two example studies:

1. the evaluation of optical image series of laboratory CO2 storage for the FluidFlower Validation Benchmark Study for the Storage of CO2 [2,3],
2. comparison of PET images of flow in fractured media against simulation data in the context of a validation study for mixed-dimensional modeling [4].

Speaker: Jan Martin Nordbotten

12:15 Understanding heterogeneous and anisotropic porous media based on geometric properties extracted from three-dimensional images

Natural porous media is generally heterogeneous and anisotropic. The structure of porous media plays a vital role and is often the source of heterogeneity and anisotropy. In a physical process such as fluid flow in porous media, a small number of major features here referred to as wide channels, are responsible for the majority of the flow. The thickness and orientation of these channels often determine the characteristics of the permeability. Typically, the identification of such major features is conducted through time-consuming and expensive simulations. Here we propose a prompt approach based on geometric properties extracted from three-dimensional (3D) images. The size or radius of the major features is obtained via distance maps, and their orientations are calculated by Principal Component Analysis. We then visualize these features with color and color brightness according to their orientation and size, together with their location and distribution in 3D space, and the simultaneous visualization of anisotropy (orientation) and heterogeneity (size) in one plot provides a straightforward way to enhance our understanding. Furthermore, we propose a refined stereographic projection to statistically illustrate heterogeneity and anisotropy. Based on this understanding, we show a new way to compress model size in numerical simulation, therefore significantly reducing computational cost, while retaining its essential characteristics.

Speaker: Liang Lei (Westlake University)

12:30 Real-world image super-resolution for digital rock analysis

The porous media community extensively utilizes digital rock images for core analysis. High-resolution digital rock images that possess sufficient quality are of great importance, but are sometimes difficult to obtain and suffer from high cost. Super-resolution (SR) approaches enhance the resolution of digital rock images, and provide improved visualization of fine features and structures, aiding in the analysis and interpretation of rock properties, such as pore connectivity and mineral distribution.

However, the majority of the existing SR methods are trained on fabricated datasets, in which the low-resolution images are created by applying a basic and consistent degradation, e.g., bicubic downsampling, to their high-resolution equivalents. And the actual low-resolution images captured from real-world scenarios could be different from the fabricated low-resolution images. Consequently, the SR models trained on fabricated data demonstrate reduced effectiveness when employed in practical situations.

In this study, we construct a real SR dataset by capturing paired low- and high-resolution images of the same rock samples using the scanning electron microscope (SEM) and computed tomography (CT) at multiple resolutions. Additionally, an image registration algorithm is developed to progressively align the image pairs at varying resolutions. Our experiments demonstrate that applying the bicubic downsampling to the high-resolution images, although widely used, is not always a good approximation of the real low-resolution images. The reason behind this can be partially explained by the mechanism in the SEM and CT techniques.

Speaker: Shaohua You (中国石油大学（北京）)

12:45 Gas Invasion Behaviors and Failure Patterns within Layered Porous Systems Investigated by X-ray CT

Gas trapping and escaping in layered geological settings widely occur. We utilized an in-situ gas injection apparatus based on high-resolution micro-CT to investigate gas invasion behaviors and deformation patterns of layered porous media systems. The system includes a reservoir and a cap layer with carefully controlled capillarity and permeability. Results show that all cases experience cycles of a pressure built up period and a sudden pressure release when a barrier, either capillarity or effective stress, is overcome. Drainage conditions significantly impact both the trapped gas volume and deformation patterns. Effective stress analyses show that dominant factors are capillarity Pc, effective stress σ’ and excess pore fluid pressure Δu, affected by gas injection rate, cap layer thickness and permeability. Five deformation patterns, capillary invasion, fracture opening, integral uplifting, local heaving and violent liquefaction are identified according to two dimensionless number χC/E = Pc/σ’ and χP/E = Δu /σ’.

Speaker: Zhenqi Guo (Westlake University & Zhejiang University)

12:00 → 13:00 MS11: 3.2

12:00 Probing into nanoparticles adsorption mechanisms through direct experimental characterization of nanoparticle-pore surface interaction forces

The adsorption of nanoparticles on the pore surface could change surface wettability and slip length, which is dominant for EOR during nanofluid flooding. It is of great value to understand the adsorption mechanism of nanoparticles on the pore surface. The interactions between nanoparticles and pore surface include four significant and common forces, such as Van der Waals force, electrostatic force, attractive hydrophobic force, and repulsive steric force.
Forces were measured directly with the colloidal probe technique of atomic force microscope (AFM), which permits colloidal particles to attach to the cantilever. The forces, obtained in solutions with different salinity, varied from repulsive to attractive, which could be well fitted with the four forces mentioned above. Different forces exert their effects at different distances, among which the action range of Ver der Waals force (about 5 nm) is the least and that of electrostatic force (nearly 40 nm) is the largest. Based on the analysis of the theoretical equations, salinity is the most significant influence factor.
Molecular dynamics simulation was employed to verify the effect of different factors on the interaction between nanoparticle and pore surface. The all-atom models of nanoparticles were modified with alkanes of different densities and lengths to evaluate the repulsive steric force. Different ions with verified concentrations were added to the system to analyze the electrostatic force. The attractive hydrophobic force was assessed by calculating the radial distribution function of water molecules around nanoparticles. The conclusion obtained from molecular dynamics simulation is consistent with the experiment.
The nanoparticles transport with the nanofluids in real pores and throats, meaning the adsorption of nanoparticles is related to the drag force and lift force, which is generated by the flow of liquids. With this fact, the mechanical equilibrium equation of the nanoparticles adsorbed on the surface was established, based on which the maximum adsorption thickness was calculated. The degree of adsorption of the nanoparticle layer on the pore surface could be significantly enhanced by slightly increasing salinity. Our results provide useful insights into the adsorption mechanism of modified nanoparticles on pore surfaces, with important implications for the effective and economical application of nanofluid flooding in different reservoirs.

Speaker: Mingliang Han

12:15 Pore-scale morphologies of CO2 hydrate formation in microfluidics with in-situ Raman spectroscopy for CO2 sequestration

CO2 hydrates are cage-like solid compounds consisting of CO2 gas molecules and water molecules. The properties of CO2 hydrates, such as high gas storage capacity and moderate formation conditions of pressure-temperature, are desirable for long-term and safe CO2 storage in geological setting. The purpose of work is to probe the feasibility of CO2 storage in hydrate in marine subsurface. Compared to natural gas hydrates, it is difficult to investigate morphological CO2 hydrate dynamics in microfluidics, as the morphologies of CO2 in liquid and water phases are similar. In this work, two scenarios were investigated regarding different CO2 states controlled by different pressures above or below CO2 liquid liquefaction pressure (PL-CO2), by means of pore-scale microscopic observation coupled with in-situ Raman spectroscopy in microfluidic chip. In one scenario, the system pressures were kept lower than PL-CO2 to form CO2 hydrate. The system was tested by both microscope and Raman spectroscope to distinguish CO2 in gas, water and hydrate. A pressure difference was observed in the system indicating hydrate blocked pore channels and prevented unwanted CO2 flow. In another scenario, the system pressures were increased over PL-CO2, which was the typical reservoir pressure, to observe CO2 hydrate formation in the system containing liquid CO2. The differences between both morphological patterns and Raman peak shift were observed, verifying CO2 could be stored in states of both hydrate and liquid. The quantitate calculation of CO2 storage capacity showed about 80 volumes of CO2 was retained in the system having only CO2 hydrates, compared with about 150 volumes of CO2 stored in the system having both CO2 hydrates and liquid CO2. The morphological patterns, Raman spectra and calculation of storage capacity indicates that CO2 hydrate storage could serve as a secondary storage option for geological CO2 storage in marine subsurface. The results of this work are beneficial to understand marine CO2 hydrate storage in confined space of porous media, and the enhanced CO2 hydrate storage capacity can be explored by coupling with hydrate promotors and thus achieve more efficient CO2 storage in marine subsurface conditions.

Speaker: Qian Ouyang

12:30 Effectiveness of CO2 microbubble method for enhanced oil recovery in fractured reservoirs

Recently, CO2 microbubbles (MBs) injection has become an important method to increase oil production in fractured reservoirs and reduce greenhouse gas emissions due to its unique physicochemical properties. The stability and size distribution of MBs as well as their flow behavior at the pore scale are key to improving the displacement efficiency and regulating the performance. In this study, a high-speed homogenizer was used to prepare CO2 MBs dispersions, and the effectiveness of this method for enhanced oil recovery in fractured reservoirs was investigated by microfluidic experiments. The results showed that the microbubbles consisted of a special three-layer structure and existed independently in the liquid phase without aggregating with each other. Moreover, the prepared MBs had a size range of 9.73-75.53 μm with an average diameter of 38.73 μm. Compared to the low sweep area resulting from inadequate mobility control of water injection, MBs injection can significantly increase flow resistance to achieve maximum sweep efficiency and oil recovery of 93.02% and 91.04%, respectively. This study demonstrates that CO2 MBs can be used as a promising method for enhanced recovery in oil reservoirs.

Speaker: Mr Baocai Tong (Dalian University of Technology)

12:45 Pore-scale investigation on the migration and distribution characteristics of gel particle systems in heterogeneous porous media

The development processes of oil in heterogeneous reservoirs are challenged by problems such as early water breakthrough, short periods of anhydrous production, and rapid increase in water cut. Gel particle systems as a very promising plugging agent can improve water flow channels, expand sweep efficiency, and improve displacement efficiency. However, current experimental research on the migration and distribution characteristics of gel particle systems in heterogeneous porous media is mainly focused on the core-scale and lacks effective pore-scale research methods. In this paper, a microscopic model reflecting the heterogeneous characteristics was designed. Based on the microfluidic experimental method, the process of injection, migration, and distribution of the gel system were investigated visually and characterized quantitatively. The factors and mechanisms affecting the distribution of gel particle systems in heterogeneous porous media are analyzed and clarified. The results illustrate that gel particle systems are predominantly distributed in high-permeability regions, followed by middle-permeability regions, and low-permeability regions are the least. Furthermore, gel particle systems plug the middle and high-permeability regions, forcing subsequent water to transfer to the low-permeability regions, and increasing the injection rate can expand the distribution range of gel particle systems.
The study of the microscopic migration of gel particle systems in heterogeneous porous media can not only provide insights into profile control and the water-plugging mechanism of gel particle systems but also effectively guide the optimization of injection parameters of gel particle systems. This theoretical guidance and technical support contribute to improving the development effectiveness of heterogeneous oil fields.

Speaker: Yiran Zhou

12:00 → 13:00 MS17: 3.2

12:00 A vectorial finite element method for the pore-scale calculation of the high temperature thermal behaviour of periodic porous 3D architectures.

In the field of carbon-free heat power generation, there is a growing interest in the design of compact and long-life high-temperature energy systems (HTES), such as thermochemical reactors, volumetric solar receivers and radiant tube inserts, among others. These energy converters have long been based mainly on porous reticulated ceramics (porosity ~75-95%, cell size ~0.1-10 mm) which can be described as a continuous ligament network delimiting open cells through which a heat transfer fluid (reactive or not) can flow. The rapid development of processes based on the principle of additive manufacturing (AM) has recently extended the possibilities of fabricating new 3D periodised geometries ranging from hierarchical structures with different sets of unit cells to triply periodic structures with minimal surfaces. From a thermal modelling perspective, one of the main challenges is to accurately account for the exact contribution of thermal radiation from these new geometries in the HTES heat balance, both in transient and steady state. To tackle this challenge, two main numerical modelling approaches can be used today to determine the temperature and/or heat flux fields within the 3D structures. The first class of approach, at the continuous macroscopic scale, requires the radiative transfer equation to be solved rigorously as long as the ceramics studied follow a radiative behaviour governed by the Bouguer-Beer-Lambert law, i.e. the extinction of thermal radiation is characterised by a negative exponential function of the optical thickness. This integro-differential equation can then be simplified into an equivalent - but approximate - thermal conduction equation by respecting the appropriate Rosseland conductivity assumption if the medium is optically thick. When the optical thickness becomes smaller (<3), other more advanced analytical and numerical approaches can be used: P1 approximation, discrete ordinate method, Monte Carlo method. However, the recent regular 3D architectures obtained by AM processes clearly show, unlike the more conventional open-cell foams, a radiative behaviour that clearly deviates from the well-known beerian behaviour, which leads to the thermal problem being solved by calculations carried out at pore scale. The concept is to treat elementary heat exchanges at the pore scale using a representative 3D image of the ceramic, beforehand obtained by X-ray µ-tomography or by computer-aid based generation. Using a scheme implemented in a solver based on vectorial finite elements, we here propose a 3-step method for cases where convective transport is neglected: (i) solving the heat equation in the solid skeleton (ii) solving the radiative transport in the fluid phase (iii) solving the conductive-radiative coupling at the fluid-solid interface. This presentation will show the results of temperature fields calculated in periodised structures and will allow us to discuss how to model radiative transport on a continuous scale when beerianity is not satisfied.

Speaker: Benoit Rousseau

12:15 Advancements in Hydraulic Fracturing Simulation Considering Complex Natural Fracture Distributions

Hydraulic fracturing, involving the injection of highly pressurized liquid into a well to break up bedrock formations, is a widely employed method for stimulating unconventional reservoirs, such as shale oil, shale gas, and enhanced geothermal systems (Gandossi & Von Estorff, 2013). Natural fractures play a crucial role in shaping stimulated reservoir volume and significantly impacting subsurface liquid production. Due to the scarcity of details on natural fractures, most research primarily focuses on regularly distributed fractures and their influence on the hydraulic fracturing process. However, these regular patterns differ significantly from actual fracture systems.

This study employs a lattice Boltzmann-discrete element method (LBM-DEM) (Galindo-Torres, 2013) to simulate the hydromechanical behavior during hydraulic fracturing (Chen & Wang, 2017, Chen et al., 2020). Additionally, we delve into the intricacies of natural fracture systems through the discrete fracture network method, incorporating these fractures into the LBM-DEM scheme. We consider two key geometrical parameters of discrete fracture networks: mean orientation and position clustering. Natural fractures are mimicked by adjusting the relative bond strength between particles. From the previous study (Zhu et al., 2023), we found that the heterogeneity of fracture strengths, injection rate, and viscosity is essential for the fracture initiation and propagation process. Therefore, in this work, we also consider different degrees of heterogeneity and injection rates under low viscosity conditions. A Taguchi design is adopted to perform orthogonal numerical tests to reduce computation time.

Preliminary observations yield several conclusions: i. Heterogeneity of bond strengths profoundly influences fracture formation and the complexity of resulting fracture systems, specifically their intensity. Extremely low bonding strength can lead to many local fractures disconnected from the primary hydraulic fracture, which, however, cannot contribute equally to production compared to the primary hydraulic fracture initiated from the perforation. ii. Higher injection rates, coupled with low viscosity, intensify fluid leakage, potentially generating extensive local fracture clusters. iii. Connectivity of hydraulic fractures increases with their propagation, positively correlating with production rates. However, production rates are more closely tied to the total area of the primary fracture cluster. iv. In the studied cases, the geometries of fractures exhibit weak correlations with connectivity and final production rates. The clustering effect tends to enhance the connectivity of formed fracture networks and, subsequently, the final production rate.

Speaker: Prof. Weiwei Zhu (Institute of Geology and Geophysics, Chinese Academy of Sciences)

12:30 Pore-scale modelling of non-linear rock deformation under low- stress ranges

Under increasing compressive stress, intrinsic micro cracks and pores in rock samples close, leading to non-linear deformation at low-stress ranges. This intrinsic non-linearity significantly affects rock geophysical properties under confinement, such as rock stiffness and transport properties. Many studies have reported this low-stress inelastic behaviour in experiments, and some analytical models have been established to predict this phenomenon. However, in the perspective of pore-scale numerical modelling, this non-linear deformation was completely ignored, and the rock was treated as elastic in simulations until rock failure. As a result, the modelled rock geophysical properties in the non-linear part are quite different from the experimental results. To address this issue, we proposed a method to predict the rock geophysical properties at the low-stress non-linear range through numerical simulations. A crucial aspect of this approach involves dividing the transition phase between macro pores and the solid phase into several sub-phases with varying porosities, all treated with zero elastic moduli. These sub-phases deform and transition to other phases based on the extent of deformation under the applied strain conditions in the Finite-Element method. The ability to interchange between different phases in the rock model enables the modelling of non-linear behaviour within the low-stress range. We validated this method on various rock samples, and the results align well with experimental measurements.

Speaker: Rui Li

12:00 → 13:00 MS23: 3.2

12:00 The Effect of Film Flow on Capillary Pressure Equilibration in Multi-Phase Flow With Disconnected Phase

Previous studies have demonstrated that curvature-based capillary pressure and transducer-based capillary pressure agrees well for both imbibition and drainage at equilibrium, if only connected fluid interfaces were analyzed. In this study, we further demonstrate that as long as the system reaches equilibration, curvature-based capillary pressure are representative for both connected and disconnected fluid interfaces regardless of whether the system is undergoing imbibition or drainage.

For a water-Soltrol 220 fluid system, we observed that the volume of disconnected nonwetting phase blobs grew during both imbibition and drainage, and surprisingly, growth was faster during drainage than imbibition. We calculated the thickness of the non-wetting phase films using the approach of Chester (1991), and based on this film thickness estimate, we calculated the flow rate of water through a sheet of film, then using the measured change in volume, we estimated the time needed for disconnected phase to equilibrate with the bulk phase via films. The results showed that the time required was well-within the time allowed for equilibration between scans.

This suggest that, due to the limitation in image resolution, some nonwetting phase blobs would be classified as “disconnected”, while it appears they may actually be connected through an “invisible” thin film of thickness below the image resolution. This has important implications for how we think about trapping in multi-phase porous medium systems, and the relative importance of flow in films with a thickness below the image resolution in equilibration processes.

Speaker: Dorthe Wildenschild (Oregon State University)

12:15 Spontaneous fragmentation of dissolving ganglia in porous media

After injecting $\rm{CO_2}$ into subsurface porous media for sequestration, $\rm{CO_2}$ may be trapped as continuous gas cap (structural trapping) 1 or dispersed ganglia (capillary trapping) [2]. The former can utilize local pore space more efficiently, while the latter has been well-recognized to be hydrodynamically more stable. After thousands of years, both gas cap and gas ganglia dissolves into formation fluid. However, the evolution of ganglia and gas cap during slow dissolution in porous media is still largely unexplored.
We conduct experiments on slow dissolution of gas in porous media into surrounding liquid. Surprisingly, the ganglia dissolution is not in classic “outside-in” mode that the ganglia interface flinches inward gradually, but in a counterintuitive “inside-out” mode: liquid bridges spontaneously emerge at the throats after several hours and finally fragment the ganglia into pieces. One example in the micromodel visualized experiment is shown in Fig. 1a. Intriguingly, it suggests a probability that structural trapping can spontaneously transform into capillary trapping during mild dissolution, which helps to achieve stable $\rm{CO_2}$ storage without sacrificing space utilization at the very beginning.
We hypothesize that this counterintuitive phenomenon, which emerges when large ganglia slowly dissolve, is driven by the optimization of free energy, i.e., forming liquid bridges is a thermodynamically more optimum pathway than outside-in dissolution. To prove this hypothesis, we first employ a conceptual 2-D theoretical model [3] to analyze thermodynamic states of ganglia in homogeneous porous media. We confirm that in porous media with narrow throats, dissolving bubble by forming liquid bridge is of lower free energy than by outer boundary flinch [Fig 1.b]. Kinetically, the liquid bridge can form via 1) film flow when liquid is completely wetting, and 2) capillary condensation of connate water via Ouzo effects when the liquid is only partially-wetting.
We further develop quasi-static pore network modeling (PNM) algorithm to extend the experimental discovery and theoretical interpretation into 3D and heterogeneous media. Pore bodies and pore throats are depicted as spheres and cylindrical tubes for simplicity. This PNM successfully identifies the thermodynamically optimum pathway of ganglia dissolution, and quantifies the quasi-steady state mass transfer coefficient between two phases [Fig 1.c]. We show that “inside-out dissolution” path results in larger mass transfer coefficient than “outside-in” path [Fig 1.d], which may facilitate dissolution and mineral trapping in subsequent stages.
In summary, we reveal a novel mechanism in $\rm{CO_2}$ subsurface sequestration that continuous gas and large ganglia may spontaneously break into pieces via forming liquid bridges during dissolution. This “inside-out” pathway is thermodynamically more favored. It provides a new perspective to estimate sequestration efficiency and safety.

Figure 1 (a) Snapshots of experiment (above) and diagrams for 2 dissolution modes (below). (b) Free energy of ganglia with different curvatures changes with increasement of liquid bridges. (c) Diagrams for PNM and evolution of bubbles in two modes. Light blue represents water while the other different colors represent different bubble domains internally continuous but mutually isolated for liquid bridges. (d) Mass transfer rate changes through dissolution in different pathways.

Speaker: Kangdi Xu (Peking University)

12:30 Imaged-based Study of Fluid Droplet Deformation During Immiscible Ferrofluid Flooding

Ferrofluid, a stable suspension of superparamagnetic nanoparticles in a liquid carrier, can be manipulated. In an external magnetic field, either constant or evolving, magnetic forces drives the ferrofluid to deform and move, leading to the deformation of the fluid-ferrofluid interface. This has been extensively used in micro-electromechanical systems (MEMS) and here we are motivated to extended these studies to subsurface porous media application, including enhanced oil recovery and environmental remediation. Unlike MEMS devices where non-wetting or non-aqueous phase liquid (NAPL) droplets are typically the ferrofluid to be deformed and manipulated, this is not possible for subsurface applications: oil or NAPL are to be recovered and only aqueous phase could be the ferrofluid. Incidentally, the high-resolution imaging of wetting ferrofluid / non-wetting fluid displacement are very limited.

A converging-diverging single channel glass micromodel with varying depth was fabricated using a standard lithography procedure. The single channel was initially saturated with brine, and then saturated with a mixture of decane and mineral oil. The micromodel was then flooded using a water-based ferrofluid under a microscope for 47 hours until no noticeable movement of remaining oil droplet was observed and the system was assumed a steady-state. Then, a magnetic field a) transverse to the flow direction and b) rotating magnetic field were applied to the system in separate experiments.

The magnetic field caused oil droplet deformation (specifically, elongation along the magnetic field direction), and dynamic breakup into smaller droplets and subsequent residual oil saturation reduction in a rotating magnetic field. In addition to studying saturation differences, we quantify the curvature of several oil droplets where the resolutions allows before and after the magnetic field application. We finally focus on experiments in a Hele-Shaw cell without flooding, where we observe self-assembly of oil droplets, the formation of the hydrophilic magnetic nanoparticle microstructures (chains under the magnetic field) and their interaction with the oil blobs. 

The experimental results show that, during a ferrofluid flooding, in the case of multiple residual fluid droplets within a pore, the fluid droplets can be deformed and potentially controlled using an external magnetic field. Such deformation by the magnetic force can aid or obscure the mobilization of the fluid droplets and has a potential to control the trapped oil saturation near the wellbore in enhanced oil recovery, and to control fluids in MEMS.

Speaker: Ningyu Wang

12:45 Visualizing Mass Transfer Across Fluid-Fluid Interfaces

When a nonwetting fluid is forced to flow through an otherwise water-saturated porous solid medium (e.g. as occurs in geologic CO$_2$ sequestration and underground hydrogen storage projects), the movement and ultimate fate of that nonwetting phase is dictated by a range of physio-chemical interactions; including trapping within pore spaces due to capillarity, mobilization via viscous or buoyant forcing, and dissolution and subsequent flow within the aqueous phase. Previous studies have constrained these transport processes, often using the explicit assumption that capillary trapping (or mobilization) and dissolution are distinct mechanisms, occurring on disjoint length and time scales. However, our recent experiments [1] suggest that there exists a strong coupling of these processes: dissolution shrinks ganglia and changes bubble morphologies; and it may also induce a concentration gradient near the ganglion interface that locally decreases the fluid-fluid interfacial tension. We observed that these impacts frequently destabilized previously trapped ganglia, ultimately inducing buoyant displacement upwards [1].

To further explore this coupled transport behavior, we have designed and deployed a novel experimental protocol which allows us to visualize dissolution mass transfer across fluid-fluid interfaces at the pore-scale. Here, we present preliminary results for CO$_2$ gas bubbles dissolving within a 3D packing of spherical beads, refractive-index matched to water. The water phase is doped with pH-sensitive fluorescent indicator. Once a CO$_2$ bubble is introduced and capillary trapped within the system, we apply Planar Laser Induced Fluorescence (PLIF) to visualize the pore-scale evolution of aqueous pH (i.e., aqueous CO$_2$ concentration) during the dissolution process. Our results demonstrate the variability of dissolved gas concentration at the pore-scale, and the influence of the fluid-fluid interface on the dissolution process. This study thus builds on the foundational work of Prof. Dorthe Wildenschild: focusing on interfacial dynamics of multiphase systems, and highlighting potential impacts to the long-term behavior of capillary trapped ganglia.

Speaker: Dr Anna Herring (University of Tennessee)

14:00 → 15:30 MS03: 3.3

14:00 Thermo-hydraulic-Mechanical Modeling Studies of Cryogenic Effects in the Near-wellbore Region of Geothermal Formations

We developed a parallel thermo-hydraulic-mechanical (THM) model of fully coupled multiphase fluid and heat flow and geomechanics as well as associated fracturing processes in porous and fractured media to simulate cryogenic fracturing with liquid nitrogen in hot reservoirs. This included enhancing our THM simulator and developing a physical property module for nitrogen-water systems and formulating fracture initiation and extension criteria.

We used cryogenic fracturing experiments on small concrete blocks to verify the simulator modifications. Then, we simulated two field cases, one with an injector-producer pair with cryogenic fracturing that enhanced the permeability in a vertical plane around the wellbore and extending in the direction of the producer. The second case was cryogenic fracturing and cooling of the near-wellbore region in a shallow, heated reservoir. The induced fractures were horizontal but their lengths were non-uniform due to the pressure and temperature gradients.

Speaker: Dr Yu-Shu Wu (Colorado School of Mines)

14:15 Experimental and molecular simulation studies of methane adsorption on deep shales

Understanding methane adsorption behavior on deep shales is crucial for estimating the original gas in place and enhancing gas recovery in deep shale gas formations. However, the methane adsorption behavior on deep shales under high pressure is challenging, and many uncertainties still exist in the process. In this study, the methane adsorption on deep shales within the Lower Silurian Longmaxi Formation from the Sichuan Basin, South China were conducted at pressures up to 50 MPa. The effects of total organic carbon (TOC), temperatures, clay minerals and moisture content on the adsorption capacity were discussed. Then the molecular models of kerogen nanopores with different shapes and sizes were constructed based on kerogen structure unit of deep shale from the Longmaxi Formation, and the methane occurrence were conducted by coupling a grand canonical Monte Carlo algorithm and a molecular dynamics algorithm. The results indicated that the methane excess adsorption on deep shales increased, then reached its peak and finally decreased with the pressure. The methane adsorption capacities exhibited strong positive correlations with the TOC content and negative relationships with clay minerals. The methane excess adsorption decreased as the temperature while the opposite trend would occur once it exceeded some pressure. The presence of the moisture content on deep shales sharply decreased the methane adsorption capacities, and the reduction of the adsorption capacity decreased with the pressure. The methane adsorption capacity in deep shales is negatively correlated with temperature, and high temperature will inhibit the affinity of methane molecules in pores.

Speaker: Prof. Weijun Shen (Institute of Mechanics, Chinese Academy of Sciences)

14:30 Investigating interface coupled mineral dissolution and precipitation processes using advanced analytical and modelling tools

Interface-coupled dissolution and precipitation (ICDP) [1] occur in various subsurface applications, e.g., serpentine carbonation in the context of CO2 sequestration, the carbonation of concrete causing degradation, anoxic steel corrosion in geological disposal facilities for nuclear waste, or during groundwater remediation using permeable reactive barriers. ICDP is characterized by the dissolution of a primary mineral and the precipitation of a secondary mineral on its surface (rim formation). The precipitated secondary minerals can either develop porosity and fractures that enable fluid exchange and thereby completely replace the primary minerals or shield/ passivate them. Therefore, understanding the factors that regulate the development of the rim is critical for predicting the geochemical reactions and the resulting impacts on various geological and environmental systems over geological time scales. To this end, we developed a column experiment where we investigated the dissolution of celestine followed by the precipitation of barite [2]. This is a well-controlled chemical system that is neither pH- nor redox-sensitive. The theoretical models to describe passivation processes in our experiment (e.g., Daval et al., [2]) were simplified and did capture the underlying processes [3]. Micro-continuum modelling work showed that the porosity of the precipitates could play a secondary yet significant role in shaping the evolution of the co-dissolution and precipitation interface [5]. Currently, we investigate the micro and nano porosity of the secondary mineral using 3D FIB-SEM and evaluate the effective diffusivity in the precipitates using pore-scale modeling [6]. In addition, we conduct complementary microfluidic experiments combined with in-situ Raman 2D/3D and modelling to evaluate the effect of fluid velocities and solution saturation ratio (Peclet number and Damköhler number) with respect to the barite overgrowth thickness. These investigations will enable the identification of parameters that control or limit passivation and its associated potential effects on further mineral reactivity.

[1] Renard et al., Timescales of interface-coupled dissolution-precipitation reactions on carbonates, https://doi.org/10.1016/j.gsf.2018.02.013
[2] Poonoosamy et al., Combination of MRI and SEM to Assess Changes in the Chemical Properties and Permeability of Porous Media due to Barite Precipitation, https://doi.org/10.3390/min10030226
[3] Daval et al., Carbonation of Ca-bearing silicates, the case of wollastonite: Experimental investigations and kinetic modelling, https://doi.org/10.1016/j.chemgeo.2009.01.022
[4] Poonoosamy et al., Effects of solution supersaturation on barite precipitation in porous media and consequences on permeability: Experiments and modelling, https://doi.org/10.1016/j.gca.2019.11.018
[5] Deng et al., A reactive transport modeling perspective on the dynamics of interface-coupled dissolution-precipitation https://doi.org/10.1016/j.apgeochem.2022.105207
[6] Yang and Wang, Pore-scale modeling of chloride ion diffusion in cement microstructures, https://doi.org/10.1016/j.cemconcomp.2018.11.008

Speaker: Jenna Poonoosamy

14:45 Wettability Impact on Immiscible Fluids Flow in Rough Fracture

Wettability can dramatically impact on the immiscible fluids flow in permeable media, including subsurface technologies to microfluidics. Previous studies have profoundly revealed this effect on flow in porous media, but so far, few systematic results on how the wettability controls flow in rough fracture are reported. Here, we conduct the visualization experiment to investigate the immiscible fluid-fluid displacement, by systematically varying the wettability of the fracture cell over a wide range of contact angles. Our observation shows that increasing the fracture’s affinity to the invading fluid results in more efficient displacement of the defending fluid up to a critical wetting transition, beyond which the trend is reversed. We find this critical contact angle is related to the roughed-wall geometry. We derive a theoretical model that describes the transitions of displacement patterns from capillary imbibition to capillary fingering to the crossover to viscous fingering as functions of wettability. This work draws the phase diagram considering wettability in rock fracture and is of practical significance in subsurface applications.

Speaker: Dr dongsheng wu (CHENGDU UNIVERSITY OF TECHNOLOGY)

15:00 Quantifying the effect of matrix diffusion on tracer transport in fractured reservoirs

Tracer testing is commonly used to characterize fracture flow and transport processes. The interpretation of tracer data requires numerous forward simulations of tracer transport in a 3D fracture-matrix model, leading to significant computational burden. As matrix permeability is generally several magnitudes smaller than fracture permeability, some studies only considered a 2D fracture model to alleviate the computational burden. However, the impact of matrix diffusion, a mechanism that may affect tracer transport even in an extremely low matrix permeability model, is unclear. This study quantitatively investigates the effects of matrix diffusion on tracer transport through an analytical solution. Based on the results, we discuss the situations in which matrix diffusion has minimal effect on tracer transport and therefore matrix can be safely ignored. A dimensionless number that integrates fracture/matrix parameters and injection parameters is proposed to estimate matrix diffusion effect on tracer transport. For situations that matrix diffusion can not be ignored, we develop an equivalent injection function to accurately quantify the effect of matrix diffusion in a 2D fracture (matrix-free) model. The feasibility of the dimensionless number as well as the equivalent injection function is further examined through numerical simulations which consider complex geological conditions.

Speaker: Hui Wu (Peking University)

15:15 Fracture-matrix interaction, fluid flow and chemical movement in low-permeability fractured media

In low-permeability unsaturated fractured rock, fluid flows predominantly through the interconnected fracture network, with some fluid imbibing into the neighboring matrix rock. Imbibition (driven by capillary pressure gradient) advectively transports chemicals from fractures into the matrix. Diffusion (driven by concentration gradient) can diffusively transport chemicals into the matrix. Once in the matrix, sorbing chemicals can sorb onto matrix rock. All these interacting processes (imbibition, sorption, and diffusion) are important to understand in the naturally and hydraulically fractured low-permeability rock. Pore structure integrates both geometry and topology of the pore network of the matrix, giving rise to emergent first-order effects on fluid flow and chemical transport in the matrix. Low permeability media make it likely that flow and transport is limited by pore topology (e.g., density of connections) rather than geometry (e.g., radius). This work discusses various, and complementary, approaches to investigating pore structure, and the resulting anomalous imbibition and diffusion, in low-permeability Yucca Mountain welded tuff of Nevada, as well as various shales of USA and China undergoing active exploration and production. Using an innovative and complementary laboratory approaches, such as imbibition and diffusion tests employing a recipe with several nano-sized tracers and subsequent microscale mapping on the shale, our work indicates the limited fracture–matrix interactions in fractured shale, with low pore connectivity of predominantly nm-sized shale matrix pores and the consequent limited (sub-mm near the fracture face under atmospheric pressure and temperature) accessible porosity and anomalous diffusion to the stimulated fracture network and producing wellbore. The presentation will end with some ongoing work of coupled thermal-hydraulics-mechanical-chemical tests and gas-liquid flooding experiments of low-permeability media with lamina.

Speaker: Prof. Qinhong Hu (China University of Petroleum (East China))

14:00 → 15:30 MS06-A: 3.3

14:00 Mechanism of oil absorption in surface engineered sponges for wastewater treatment

Using porous materials for absorption of fluids has been practiced for thousands of years, for e.g. water storage and release and for filtration purposes. The chemical nature of the porous material and the flow dynamics determine how absorption takes place and which fluids are preferentially absorbed. In this way, materials can be designed for various fluid separation applications. In our work, we study the effects of the pore geometry on absorption of oil into surface engineered sponges. The sponges consist of a polyurethane based fiber network and contain a porosity of ~98%. The fibers are made hydrophobic by chemical functionalization for usage in wastewater filtration and oil spillage clean-up [1]. They contain both pores in between fibers (inter-fiber pores) as well as within the fibers themselves (intra-fiber pores). We study the mechanism of the absorption process by tracking dodecane (a hydrocarbon) invasion in 3D over time using dynamic micro-CT experiments. The experiments were performed within the EXCITE network using the EMCT scanner at University of Gent Center for X-ray tomography (UGCT).

In the visual experiments, we observe an initial precursor invasion of dodecane in pores in between fibers within a few hours, without invasion of the interior of the fibers. Likely, this precursor front is driven by a density difference between water and oil, since the front moves under positive curvature (i.e. against capillarity). This indicates an initially weakly water-wet nature of the fiber surface. Quantitative volumetric measurement data, through which we fit a two-term kinetic model, show a second main front of dodecane moving into the samples on a time scale of several days. The slower main front invasion is coupled to a change in the observed fiber wettability at the pore scale from water-wet to oil-wet over time.

In order to elucidate the absorption mechanism, we conduct separate experiments using dodecane emulsified in water. We observe a gradual uniform absorption of dodecane in intra-fiber pores, on which droplets of dodecane nucleate. These droplets grow over time, partially filling the inter-fiber pores. This effect shows us that the exterior of the fibers indeed likely change to an oil-wet state due to the invasion of oil into the fibers.

This research shows not only the significance of precursor fronts in fluid absorption processes in porous media, but also that they can be caused by gravitational effects instead of capillarity [2]. The study results can be extended to porous media applications where a range of pore sizes can be expected, such as wastewater filtration, CO2 and hydrogen storage in porous reservoir rocks and paper wetting in inkjet printing.

Speaker: Mr Gijs Wensink (Eindhoven University of Technology)

14:15 Minimal Surfaces in Mixed-Wet Bead Packs: Insights from 3D X-Ray Imaging

The interfacial curvature of immiscible fluids within porous media is critical for the comprehensive understanding of multiphase fluid, impacting capillary pressure, relative permeability, saturation distribution, and the formation of preferential flow paths. Despite many studies that have been made demonstrating that interfacial curvature is strongly affected by wettability, there are still some fundamental questions that remain unresolved. In this work, we employed three-dimensional (3D) X-ray imaging techniques combined with automated interfacial curvature analysis to examine the minimal surfaces under mixed wettability conditions, using random arrangements of spherical glass beads, which are hydrophilic, and plastic beads, which are hydrophobic. Our findings confirmed the existence of mean curvatures approaching zero (minimal surfaces), suggesting optimal conditions for the simultaneous flow of two connected phases. This work provides insight into the ideal wettability conditions for enhancing oil recovery, CO2 sequestration, hydrogen storage, groundwater remediation, optimizing water management in polymer electrolyte fuel cells, and designing microfluidic devices.

Speaker: Ms Min Li (Dalian University of Technology)

14:30 Seepage Model of Conglomerate Based on Deep Neural Network and Finite Element-Discrete Element Coupling

When previous researchers reconstructed three-dimensional rock models based on two-dimensional images (cast thin sections, electron microscopy, CT slices), they usually modeled based on particle size distribution, replacing particles in the model with spheres. This method is suitable for rocks with good particle size sorting. However, the sorting of conglomerates is poor, the particle size of large particles and small particles differs by several orders of magnitude, which can easily cause large errors in calculations. At the same time, the particle morphology of conglomerates is also complex, and the impact of morphological features on permeability can no longer be ignored.
This paper proposes a method for reconstructing a seepage model based on a deep neural network and Finite Element-Discrete Element Coupling, targeting the influence of particle size distribution and particle morphology in conglomerates on permeability characteristics. The method is divided into three steps: (1) Use a deep neural network to perform semantic segmentation on two-dimensional images, dividing the image into large particle blocks, small particle blocks, and pores; (2) According to the particle size distribution and porosity of the small particle blocks, use the discrete element method for three-dimensional reconstruction, and combine CFD for seepage simulation; (3) According to the morphological features of the large particle blocks, convert them into finite element plane models, and couple them with the discrete element models to calculate the predicted permeability of the original two-dimensional image.
This paper compares the predicted permeability with physical experimental results and the classic Kozeny-Carman prediction equation, verifying the accuracy and superiority of the method in this paper. The main work and conclusions of this paper are: (1) The method in this paper can effectively consider the impact of particle shape on permeability characteristics and improve the prediction accuracy of permeability; (2) The method in this paper can make full use of the information of two-dimensional images, reducing experimental costs and calculation time; (3) The method in this paper has a certain universality and can be extended to other types of porous media.

Speaker: Kang Yan (Yangtze University)

14:45 Upscaling of Relative Permeability on a Laminated Sandstone after Pore-scale Rock-typing Using Minkowski Functionals

Relative permeability is an essential parameter to describe flow and transport in porous media, which is a vital process throughout various underground engineering and environmental projects. Traditional laboratory measurements for two-phase flow in rock samples are rather time-consuming and financially expensive. Digital physical analysis, on the other hand, provides a convenient alternative with the assist of advanced X-ray imaging technology. Nevertheless, limited by computational resources, pore-scale numerical simulations are normally conducted on a homogeneous cubic digital sample with a side length of a few hundred voxels. For a highly resolved image, the physical size may even be smaller than a cubic millimeter, which is inadequate to serve practical purposes. Hence, upscaling of pore-scale numerical simulation to continuum scale has attracted extensive interest, which is challenged by severe structural heterogeneity of reservoir rock and the limitations on imaging and computational aspects. Towards the issue, we offer a novel approach of pore-scale rock-typing and relative permeability upscaling. Integral geometry is applied on a 3D segmented tomogram of a laminated sandstone to compute regional Minkowski measures of volume, surface area, the integral of mean curvature and the integral of total curvature. The feature maps are then utilized for the recognition of relatively homogeneous regions/pore-scale rock-types through Support Vector Machine method. A few subsamples are then extracted from each rock-type to compute the representative capillary pressure and relative permeability curves using Pore Network Model, which are assigned back to corresponding regions of the rock-type distribution map before fast upscaling of the whole image applying van Genuchten model. The upscaling results are then compared with full-scale computation on the original tomogram. The excellent agreement has indicated great potential of this approach to bridge the gap between pore-scale and continuum-scale two-phase flow research under the guarantee of accuracy and computational efficiency.

Speaker: Ms Han Jiang

15:00 Spontaneous imbibition in dual permeable media using dynamic pore network model

Understanding preferential flow in porous media holds substantial theoretical significance on the design and optimization of hydrocarbon exploitation in shale reservoir. Previous researches discussed the competition of imbibition front in layered porous media while the underlining mechanism for interfacial dynamics and induced displacement efficiency of multiphase flow remains ambiguous. In this paper, we investigate the spontaneous imbibition in dual permeable media and analyze the flux exchange between the neighboring porous zones with permeability contrast using dynamic pore network model. The impact of fluid viscosity ratio and permeability contrast on the spontaneous imbibition preference have been addressed, and finally a phase diagram for displacement efficiency has been obtained. The results revealed that the dual permeable structure enhanced the invasion rate of wetting fluid in the low-permeable zone and induced unstable displacement patterns, leading to reduction of the long-term displacement efficiency. The interfacial pattern transition from stable displacement to unstable pattern in dual permeable media could be ascribed into the flux exchange between dual permeable zones, which shows a contrary impact on the fluid flow within the low-permeable zone under favorable and unfavorable viscosity ratios. The permeability contrast in dual permeable media intensifies this impact during spontaneous imbibition. These results help us to understand the occurrence and mutual interaction of multiphase flow in layered porous media, and provide a theoretical guidance for the hydrocarbon exploitation in shale reservoir.

Speaker: Wenbo Gong

15:15 Spatial characterization of wetting in porous media using local lattice-Boltzmann simulations

Wettability is one of the critical parameters affecting multiphase flow in porous media. The wettability is determined by the affinity of fluids to the rock surface, which varies due to factors such as mineral heterogeneity, roughness, ageing, pore-space geometry, etc. It is well known that wettability varies spatially in natural rocks, it is still generally considered a constant parameter in pore-scale simulation studies. The accuracy of pore-scale simulation of multiphase flow in porous media is undermined by such inadequate wettability models.
The advent of in-situ visualization techniques, e.g., X-ray imaging and microtomography, enables us to characterize the spatial distribution of wetting more accurately. There are several approaches for such characterization. Most include the construction of a meshed surface of the interface surfaces in a segmented X-ray image and are known to have significant errors arising from insufficient resolution and surface-smoothing algorithms.
This work presents a novel approach for spatial determination of wetting properties using local lattice-Boltzmann simulations. The scheme is computationally efficient as the segmented X-ray image is divided into subdomains before conducting the lattice-Boltzmann simulations, enabling fast simulations. To test the proposed method, it was applied to two synthetic cases with known wettability and three datasets of imaged fluid distributions. The wettability map was obtained for all samples using local lattice-Boltzmann calculations on trapped ganglia and optimization on surface affinity parameters. The results were quantitatively compared with a previously developed geometrical contact angle determination method.
The two synthetic cases were used to validate the results of the developed workflow, as well as to compare the wettability results with the geometrical analysis method. It is shown that the developed workflow accurately characterizes the wetting state in the synthetic porous media with an acceptable uncertainty, and is better to capture extreme wetting conditions. For the three datasets of imaged fluid distributions, our results show that the obtained contact angle distributions are consistent with the geometrical method. However, the obtained contact angle distributions tend to have a narrower span and are considered more realistic compared to the geometrical method.
Finally, our results show the potential of the proposed scheme to efficiently obtain wettability maps of porous media using X-ray images of multiphase fluid distributions. The developed workflow can help for more accurate characterization of the wettability map in the porous media using limited experimental data, and hence more accurate digital rock analysis of multiphase flow in porous media.

Speaker: Mrs Reza Haghanihasanabadi (NTNU: Norwegian University of Science and Technology)

14:00 → 15:30 MS10: 3.3

14:00 X-ray microtomography imaging of two-phase fluid flow in water-wet and mixed-wet Bentheimer sandstone

X-ray microtomography (micro-CT) provides a nondestructive way for estimating rock properties such as relative permeability. Relative permeability is computed on the fluid distributions generated on three dimensional images of the pore structure of a rock. However, it is difficult to numerically reproduce actual fluid distributions at the pore scale, particularly for a mixed-wet rock. Recent advances in imaging technologies have made it possible to directly resolve a large field of view for arbitrary wetting conditions.
Herein, the objective of this study is to evaluate relative permeability computations on imaged fluid distributions under water-wet and mixed-wet conditions. By simultaneously injecting oil and brine on a Bentheimer sandstone before and after wettability alteration, imaged fluid distributions are obtained under steady state conditions. Then we determine in situ phase saturations and capillary pressures from interfacial curvature measurements along an entire core, thus achieving the assessment of the capillary pressure gradient and its influence on multiphase flow. We demonstrate how the pore-scale capillary pressure gradient affects multiphase flow and, in turn, the core-scale relative permeability measurements. Analysis of imaged fluid distributions and connectivity demonstrates that under mixed-wet conditions , increased dynamic connectivity and ganglion dynamics result in non-equilibrium effects at the fluid-fluid interface. These effects result in more energy dissipation during fractional flow in mixed-wet systems and thus lower effective permeability than water-wet rock at the same saturation.

Speaker: Shuangmei Zou

14:15 Pore fluid identification with innovative non-electrical methodology for Ultradeep tight reservoirs

The Tarim Basin is well known for its high-gas production as observed in the remarkable West-to-East Gas Transmission Project. The reservoirs are mainly located deep at approximately 8000-m vertically in different types of lithologies, with tight petrophysical properties. Fluid identification is a key tool used to locate the sweet spot with high producibility for further development. Resistivity is the most common and straight-forward method for identifying the sweet spot. However, because of the mixed effects from pore structure, formation sedimentary dips, far-end fractures, and the influence of the surrounding rocks etc., hydrocarbon and water cannot be easily distinguished based on the resistivity difference. In tight carbonates, the Archie equation is not always a good solution while the reservoir shows strong heterogeneity in mineralogy and pore structure. There is no obvious cross-over effect for sonic based analysis as well. This paper presents how a novel methodology based on nonelectric openhole logs reveals the fluid types in the tight sandstone and carbonate reservoirs in this ultradeep environment.
The workflow presented in this paper is based on wireline logging techniques, including advanced spectroscopy and nuclear magnetic resonance (NMR) T1-T2 measurements. Advanced spectroscopy uses both capture and inelastic gamma ray spectroscopy measurements, providing precise dry weights for elements and minerals, together with total organic carbon (TOC). The spectroscopy measurements also provide the thermal neutron cross section (sigma) and chlorine concentration measurements, which are sensitive to different fluids while the formation is saline. T1-T2-based 2D NMR measurements provide porosity and permeability information for T2-based analysis. When used in conjunction with T1 -based measurements, the fluid identification through different T1-T2 response provides an advantage for distinguishing hydrocarbons and water. Relaxation due to diffusion only applies to T2 and never to T1. Given the typical magnetic field gradients of the logging tool, the oil and gas signal can be easily distinguished from the T1/ T2 ratio. The continuous measurement enables separation and quantitation of different fluids that exist in the pore system for the entire interval of the targeted reservoir.
This paper presents case studies from this ultradeep reservoir in China for both clastics and carbonates formations that solved the fluid identification issue when resistivity cannot directly distinguish fluid types. For hydrocarbon zones, borehole and formation chlorine concentration without obvious difference, and for T1/T2 ratio is normally over three summarized from different formation types. The results matched well with the test results, which provided a novel solution to f the sweet spot interval identification for the targeted reservoir. The results show the compatibility of this workflow in different formation types and reservoirs.
This paper presents a successful and novel integrated workflow that combines multiple wireline measurements for fluid identification in tight carbonate reservoirs when the uncertainty of the resistivity method is high due to multiple factors. Also, the nonelectrical methodology significantly lowers the uncertainty for water saturation estimation. This result has helped to enhance the methodology for fluid identification and earn considerable economic value by escaping the water zones in the further development of the reservoir.

Speaker: Liang Cai

14:30 Quantifying the effective porosity of reservoir and source rocks: Multi-scale and multi-approach studies

Microscopic pore structure characteristics of both reservoir and source rocks (e.g., sandstones, carbonates, and mudrocks) –pore-size distribution, pore shape, and pore connectivity – control fluid flow and chemical transport. Focusing on effective porosity, the portion of connected pore space as conductive pathways to participate in flow and transport (e ,, as an indicator of macroscopic connectivity), this presentation discusses various approaches to quantifying the effective porosity for a range of oil and gas reservoir and source rocks. The approaches include pycnometry (liquid and gas), pore and bulk volume measurement after vacuum saturation, porosimetry (mercury intrusion porosimetry, low-pressure gas physisorption isotherm, water vapor adsorption/desorption isotherm, nuclear magnetic resonance cyroporometry), imaging (X-ray computed tomography, Wood’s metal impregnation, field emission-scanning electron microscopy SEM, focus ion beam-SEM), scattering (ultra- and small-angle neutron and X-ray), the utility of both hydrophilic and hydrophobic fluids as well as fluid invasion tests (imbibition, diffusion, vacuum saturation) followed by laser ablation-inductively coupled plasma-mass spectrometry imaging of different nm-sized tracers. Our results indicate a disparate characteristics and range of effective porosity, with a single-zone behavior and a value of connectivity at approximately 70% for sandstones, as compared to “dual-connectivity zones” at 70% and 0.01% for organic matter-rich mudrocks.

Speaker: Dr Qiming Wang

14:45 Spectral micro-CT imaging of soil: retrieving atomic information and density maps

Introduction

Micro-CT is a unique technology to non-destructively investigate the internal structure of samples, spanning a range from centimeter to micrometer scale. However, when it comes to material identification, the technology has some inherent limitations. The contrast observed within a micro-CT scan arises from a multitude of factors. The attenuation coefficient of a material is influenced not only by its atomic number and density but also by additional variables such as X-ray energy, the X-ray spectrum, and the characteristics of the employed detector. These diverse factors collectively contribute to the observed contrast, making the process of material identification in micro-CT scans a nuanced and multifaceted endeavor.
By using a spectral detector, not only the attenuated intensity of the X-ray beam can be measured, but the energy spectrum of the X-ray beam is captured when it passes through a sample. This capability facilitates the segregation of information relating to both the atomic number and density within the spectral scan.

Materials and Methods

A contaminated soil sample was into a 7 cm diameter container and scanned on a TESCAN UniTOM XL SPECTRAL using both traditional attenuation-based tomography and spectral tomography which allows to measure the entire energy spectrum between 20 and 160 keV of the X-ray beam. The spectral data was reconstructed and analyzed using the TESCAN Spectral suite, which enabled to extract spectra and analyze K-edge information from dense mineral phases in the sample and generate maps of the atomic information (Zeff) and the density in the soil.

Results and Conclusion

In this work we show how spectral micro-CT can improve material identification for porous geological material like soil. The soil was contaminated with heavy metals and the spectral K-edge imaging was used to analyze the distribution lead in the soil. This is illustrated in figure 1, where the spectral signature of 2 dense grains is shown. The presence of the K-edge of Pb in one of the spectra is clearly present, positively identifying lead bearing particles in the soil.
The attenuation coefficient in a micro-CT image depends on the X-ray energy, the atomic number and the density. Because we have information of all the X-ray energies between 20 and 160 keV in the spectral CT a better distinction between the atomic information (Zeff) and density can be made.
In the soil we have larger granules in a finer grained matrix. In figure 2 we can see that in the Zeff map there is no difference between the granules and the matrix. While in the density map the matrix and granules can clearly be discriminated. This shows that the granules in the soil have the same chemical composition as the matrix (same Zeff) but have a clear difference in density, where the granules are far denser compared to the matrix.
All results show the large potential of spectral CT in enhancing attenuation-based micro-CT and providing new and unique insights in all types of materials.

Speaker: Marijn Boone (TESCAN XRE)

14:00 → 15:30 MS11: 3.3

14:00 Validation of methodology for MMP measurements on microfluidic slim-tube analogue

The industry-accepted standard to define the necessary conditions for miscible oil displacement by gas is the laboratory slim-tube test, which lasts over one month and requires much fluid to be tested. This research aims to validate the results of experiments on microfluidic slim-tube analogues for the determination of minimum miscibility pressure (MMP) and propose a novel methodology to overcome the drawbacks of the traditional method. The porous structure of the microfluidic chip used in this study is represented by a channel filled with cylinders randomly distributed along it. The silicon-glass microfluidic chip and the special microfluidic platform enable working under the thermobaric conditions of the real reservoir. Mimicking real-field scenarios, the recombined live oil composition was used along with recombined associated petroleum gas. During each test, oil was displaced by gas with a minimal flow rate, whereas miscibility was determined based on the analysis of front propagation. The set of experiments was conducted at a temperature of 110 °C under pressures varying from 35 to 42 MPa. In total, five discrete microfluidic displacement tests were successfully performed. Additional tests that involved backfilling the microfluidic chip were done at the same pressure conditions, exhibiting high experimental repeatability. At each pressure point, displacement coefficients were determined based on the processing of experimental videos with subsequent post-analysis. The MMP value of 39.9 MPa was obtained by plotting all the experimentally determined displacement coefficients at different pressures and constructing two linear approximation lines for miscible and immiscible regimes. A comparative analysis of microfluidic and slim-tube approaches showed a relative difference of less than 5%, which proved the validity of the presented method. The proposed methodology has demonstrated its potential for accurately determining the MMP, which would have significant implications for the gas EOR projects in the fields. Each run of microfluidic experiment required less then 10 ml of recombined oil, which was more than ten times less than for an experiment on a slim-tube test. Moreover, a single microfluidic took less than half a day to complete - five times less than for a slim-tube test.

Speaker: Evgeny Shilov (Skolkovo Institute of Science and Technology, LABADVANCE LLC)

14:15 3D microfluidic investigation of crystallization behavior in porous media for carbon storage application

We investigate the impact of multiphase fluid transport on nucleation and crystallization (precipitation) reactions under pore confinement and the influence of that behavior on permeability and accessible pore space in porous media. Experiments at the intersection of geochemistry and microfluidics have the potential to enable a step change in understanding CO2 storage and mineralization mechanisms by investigating the influence of transport on mineralization rates reported from batch reactor experiments. To study precipitation of silicate and carbonate minerals in mafic/ultramafic formations for carbon storage applications, we create models of 3D unconsolidated or sintered glass bead “grains” in glass tubes and planar cells with varied reactive inclusion “grains” of (1) mafic/ultramafic minerals including MgO, brucite, and olivine and/or (2) water-soluble seed crystals (e.g., sodium chloride, sodium acetate, copper sulfate) that are mounted in a microfluidic setup. The latter form from supersaturated brines at faster rates than geologic crystals and are used as mineralization proxies to explore crystallization dynamics in a lab microfluidic setting on a reasonable timescale. Mineralization reactions of mafic/ultramafic inclusions are slower, in part because gaseous CO2 must dissolve into the brine and the minerals must dissolve to release ions before the crystal formation can proceed. The microfluidic devices are pre-saturated with a brine of the necessary ionic concentration to promote crystallization. Then, either air or CO2 gas is injected depending on the desired reaction. This multiphase flow produces liquid-gas interfaces that influence crystallization. Flow dynamics and the habits of crystal nucleation and growth under pore-confinement in these engineered porous media are captured with time-lapse microscopy (e.g., stereomicroscope, confocal microscope, microCT) while keeping the samples intact. On select samples, cross-sections (e.g., billets and thin sections) of the samples are examined with microscopy (e.g., thin section, SEM, EDS) and bulk sample measurements (e.g., helium pycnometer, imbibition capacity) are acquired after reactive transport to quantify porosity changes with crystallization.

This presentation first details development of fabricated “lab-on-a-chip” miniature 3D synthetic rocks with varied reactive properties. The workflow enables control of porosity, permeability, microstructure, mineral composition, and accessible reactive surface area and allows for easier in-situ observations and measurements as opposed to real core experiments. Next, the presentation provides early insights on how formation of carbonates and carbonate mineralization proxies alters the microstructure of a rock and how to optimize injection strategies to maximize crystallization reaction and minimize permeability reduction. Results suggest that precipitation favors diffusion-dominated zones and that nucleation behavior and location will be influenced by liquid/gas interfaces and the presence of thin films. Results are cast in terms of dimensionless transport numbers (e.g., Capillary, Damkohler, Peclet numbers) and provide ideal benchmarks for numerical modeling and functional relationships for accelerating or inhibiting carbon mineralization within a porous media. Going forward, the 3D microfluidics setups will enable investigation of a host of coupled pore-scale alteration phenomena, including dissolution, carbonation/precipitation, and swelling/shrinking as a function of fluid flow/injection rates, pH, total dissolved solids, temperature, and pressure.

Speaker: Rosalie Krasnoff (Columbia University)

14:30 Assessing pH Impact on Miscible Phase Displacement and Mixing within Porous Structures

pH-induced reactive transport among miscible phases in porous environments is pivotal in carbon capture and storage (CCS) applications, especially in the carbon sequestration process, where the mixing process among the miscible phases affects the pH transport. However, separating the mixing from the pH migration is challenging due to the pore-scale heterogeneities and limited understanding of the role of pH in the mixing and displacement processes within porous media.. In this study, we use two sets of basic water solution to displace weak acidic water glycerol mixed solution, one set with certain concentration of pH-sensitive fluorescent dye Pyranine as the pH indicator in both phases to examine the influence of pH on miscible phase flow and displacement in porous media, the other set with fluorescent dye Rhodamine 6G as the mixing process indicator, explicitly visualizing how heterogeneity affect the mixing and displacement patterns and comparing this theoretical pH pattern obtained from the mixing process with the actual visualized pH migration pattern. The research employs confocal microscopy to visualize these processes, revealing diverse patterns across different heterogeneity porous media types, and mainly illustrates the significant role of pH in shaping fluid dynamics and reactive transport by leading to enhanced fluid migration and mixing. An initial outcome has showed that the migration of pH follows a different mechanism from the mixing process. Thus, it offers new insights for modeling such complex systems in natural and industrial settings, which may be practical for field-scale applications by outlining the details of pore-scale transport and reaction

Speaker: Tongzhou GAN

14:45 Microscopic Percolation Patterns in Multiphase Flow of CO2 Enhanced Oil Recovery and Mineralization

The use of CO2 for secondary oil recovery has become a crucial means to achieve emission reduction. However, the microscopic transport mechanisms of water-oil-CO2 during this process, as well as the regulations governing CaCO3 precipitation in porous media leading to pore clogging and reduced permeability, remain unclear.

This experiment conducts a visualized study of CO2-oil-water percolation in homogeneous porous media, examining the impact of displacement factors such as flow rate and pressure on recovery. We quantify stable displacement, capillary fingering, viscous fingering, and other modes. Based on CO2-oil-water percolation experiments, a buffer solution is injected under different flow rates and pressure conditions to catalyze and accelerate CO2 mineralization reactions. The experiment observes the microscopic aggregation and distribution patterns of CO2 mineralization crystals in porous media, exploring the resulting changes in pore volume and their corresponding effects on permeability and fluid mobility.

This experiment employs a specialized pressure-resistant microfluidic chip with a CaCO3 coating, accurately simulating the geometric structure and surface properties of underground rocks. The chip initially exhibits an oil-wet surface, and upon injection of low-concentration desalinated seawater (referred to as desalination water), cations in the desalination water transform the wettability of the rock crystals, causing certain coatings to transition to water-wet characteristics. Before the breakthrough of desalination water, there is a positive correlation between the internal pressure of the chip and the injection flow rate, while it exhibits a negative correlation with pore size. The heterogeneity of pore shapes and sizes in heterogeneous media results in higher injection pressure compared to homogeneous media. After the injection of supercritical CO2 (ScCO2) into the chip, the remaining water dissolves some CO2, creating an acidic environment within the chip, and corroding the CaCO3 coating within the channels. However, the chip also contains ScCO2-encapsulated media, preventing corrosion and forming a protective phase. ScCO2 can similarly alter the crystal wettability, transforming it into CO2-wet. Injection of a buffering solution to adjust the internal environment of the chip to alkaline conditions results in the formation of CaCO3 crystals adsorbed on the surface of the porous media. Nevertheless, Some crystals tend to aggregate, indicating that CaCO3 might bridge at the pore entrance, potentially causing blockages.

This study focuses on the fundamental mechanism analysis of CO2 multiphase flow and sequestration, researching improvement measures for CO2 enhanced oil recovery and storage technologies. It lays a crucial research foundation for enhancing petroleum recovery, contributing to the achievement of carbon peaking and carbon neutrality goals.

Speaker: Qingxuan Wang (China University of Petroleum (East China))

15:00 PoroFluidics: Deterministic fluid control in porous microfluidics

Microfluidic devices with open lattice structures, equivalent to a type of porous media, allow for the manipulation of fluid transport processes while having distinct structural, mechanical, and thermal properties. However, a fundamental understanding of the design principles for the solid structure in order to achieve consistent and desired flow patterns remains a challenge, preventing its further development and wider applications. Here, through quantitative and mechanistic analyses of the behavior of multi-phase phenomena that involve gas-liquid-solid interfaces, we present a design framework for microfluidic devices containing porous architectures (referred to as poroFluidics) for deterministic control of multi-phase fluid transport processes. We show that the essential properties of the fluids and solid, including viscosity, interfacial tension, wettability, as well as solid manufacture resolution, can be incorporated into the design to achieve consistent flow in porous media, where the desired spatial and temporal fluid invasion sequence can be realized. Experiments and numerical simulations reveal that different preferential flow pathways can be controlled by solid geometry, flow conditions, or fluid/solid properties. Our design framework enables precise, multifunctional, and dynamic control of multi-phase transport within engineered porous media.

Speaker: Zhongzheng Wang (Queensland University of Technology)

14:00 → 15:30 MS12: 3.3

14:00 Time-Resolved Schlieren Imaging of Pulsatile Flow in Sinuous-Shaped Constricted Pores

Traditional porous media wave theory, such as the Biot theory and BISQ model, typically rely on the idealized assumption of smooth cylindrical pores. However, in actual reservoirs, pores often manifest as structures with non-smooth walls and varying diameters, where pores and throats alternate, making them far more complex. These real-world conditions pose new challenges, especially in accurately depicting the impact of fluid flow on wave propagation in these complex structures.
In this work we have proposed a new quantitative research method using the sinusoidal-wall tube model to study fluid flow in porous media. This approach is not only applicable in the field of biomechanics, such as in the description of blood flow, but also in rock physics, especially when considering the dispersion and attenuation effects on wave propagation. A highlight of the work is the introduction of the sinusoidal-wall tube structure, adding an extra dimension to pore geometry, thereby differentiating it from previous porous models. Firstly, we have developed a time-resolved Schlieren imaging system to observe fluid flow in the sinusoidal-wall channel. The optical flow method is used to process the Schlieren images, which enabled us to determine the fluid velocity field quantitatively. Base on the observed velocity field, the fluid pressure field is determined by Naiver-Stokes equations. In addition, we used COMSOL software for numerical simulations, which reproduced the presence of countercurrent and vortex flow in the sinusoidal-wall tubes. These experimental observations and numerical results provide strong evidence of new mechanism for wave dispersion and attenuation in porous media. The results of this research may have a profound impact on rock physics, particularly in understanding the behavior of seismic waves propagating in complex porous media.

Speaker: Mr Weitao Sun (Tsinghua University)

14:15 A New Method for Dynamic Analysis and Predicting Production of Multi - Fractured Horizontal Tight/Shale Oil Wells

Predicting production of tight/shale oil has been attracting people's discussion. In this paper, a new method for dynamic analysis and predicting production of multi-fractured horizontal tight/shale oil wells is provided.
After horizontal well fracturing, the boundary-dominated flow is occurred in the fracture, transient linear in the pressure sweep area is assumed as a series of pseudo-steady states. The appropriate method for historical fitting is selected, and the objective function, inversion parameters, initial values ,adjustable ranges etc is determined. The L-BFGS-B algorithm is used to quickly obtain the specific values of the inversion parameters and complete the historical fitting. On this basis, the prediction of production is completed.
The production data of a well in Daqing oilfield, China is selected to validate this method. The historical fitting effect is very well, and the time is short. The result show that this method has the characteristics of fast calculation speed, high fitting precision and considering multiple inversion parameters.
The novel feature of this method is that the tight/shale oil production prediction model is established on the concept of dynamic sweep, which can realize the rapid prediction of reservoir reconstruction scale and estimated ultimate recovery(EUR). The result of this method can be mutually verified with the numerical simulation result. This paper provides a new method for dynamic analysis and predicting production of multi-fractured horizontal tight/shale oil wells for petroleum engineers.

Speaker: Mr Yanjie Guo (China University of Petroleum, Beijing)

14:30 Hydro-mechanical coupling analysis method for dynamic response of coral reef island airport foundation under aircraft load

Airports on South Pacific islands are often built on coral sand foundations. The coral sand particles of the foundations are characterized by high porosity, irregular shapes, and particle fragile. The hydro-mechanical coupling responses of the coral sand foundation caused by the cyclic aircraft load are still unknown. This research focuses on the increase in porous pressure and softening of the sand structure of the foundation, which are the dominant factors affecting the long-term stability of the airport foundation. To obtain those factors, a hydro-mechanical coupling simulation was conducted with a typical foundation FEM model composed of the runway, foundation, and base rock. The Biot dynamic consolidation theory and the viscoelastic plastic constitutive model of the coral sand were applied in the simulation. The aircraft moving load was calculated via the International Flatness Index (IRI) method. The response characteristics of the coral island airport foundation under the long-term aircraft moving loads were simulated, and the evolution of foundation damage and long-term settlement during airport operation were obtained. The long-term stability evaluation of typical coral island airport foundations was obtained through the deformation control theory.

Speaker: Ning Zhang (Nanjing Tech University)

14:45 Interaction Mechanism Between Hydrate Phase Transition and Deformable Sediment Structure under Cold Seep System

Cold seeps under seafloor manifests the migration of methane-rich fluid from the sedimentary subsurface to the seabed and into the water column, and even reach the atmosphere. As an important way of methane cycling on the Earth, the cold seeps are often accompanied by the occurrence of methane hydrates, which are hydrocarbons resources with the high hydrogen to carbon ratio. However, the interaction influencing mechanism between methane hydrate phase transition and methane-rich fluid (particularly methane gas) seepage in deformable subsurface marine sediments are still lacking knowledge. In this work, we conducted in-situ hydrate formation and dissociation experiments in fine grained clayey sediments collected from the active cold seep area in South China Sea. By advanced X-ray Computed Tomography technology and in-situ heating as well as hydrate phase transition controlling method, we successfully acquired the dynamic hydrate phase transition behaviors and its effects on sediment pore structure evolution, anisotropy methane seepage, and solid migration under complex thermo-hydro-mechanical conditions. It is revealed that methane hydrates first occupy initial sediment pores while generating new pores and fractures in clayey sediments. The filling and generation of pores by hydrate formation and growth lead to the pore morphology evolution. However, we found that the degree of anisotropy decreases while the fractural dimension increases with the growth of hydrate in pores. Meanwhile, hydrate formation results in solid (e.g. sediments and shells) migration, thereby leading to the pore structure transformation. The shape factor of pores increases with hydrate formation and decreases with hydrate dissociation. During hydrate dissociation, we found that hydrate tend to be reformed in clayey sediments before initiating dissociation. The combining effects of hydrates reformation and hydrate dissociation lead to more enlarged pores in sediments. More significantly, the enlarged pores result in unpredictable damage to the sediment structure after the termination of hydrate dissociation. To address this potential poromechanical problem, we further simulate the solid migration process in clayey sediments during the overall hydrate phase transition process. It is found that the solid particles migrate toward the bottom of the sediments during hydrate formation process, leading to the compaction of sediment structure. On the contrary, during hydrate dissociation, the solid particles significantly move toward the upper region of the sediment, as the results of gas and water seepage through the newly generated and enlarged pores. These experimental observations would improve our understanding of the poromechanical controls and influencing mechanisms between hydrate phase transition, pore structure evolution, and hydrocarbon fluid flow in cold seep systems.

Speaker: Xuan Kou

14:00 → 15:30 MS17: 3.3

14:00 The evolution of water ice reservoir in lunar polar regions

In the permanently shadowed regions of lunar polar craters, there may exist significant reserves of water ice in the porous lunar regolith (1,2), offering the potential for scalable extraction to address the water supply bottleneck for lunar bases. However, there currently are only some indirect measurements of ice content on shallow surface layer. The scale and spatial distribution of water ice underneath the lunar surface are still largely unknown.
Here we study evolution of water ice in the permanently shadowed regions at geological time scale (~billion years). We establish a three-dimensional simplified model based on the assumption of quasi-steady-state heat and mass transfer in presence of rarefied vapor crystallization and ice vaporization. After modifying earlier approaches on dispersed fluid/cluster evolution in porous media (3), we propose diffusion and phase change equations suitable for extreme environment for ice and water vapor in lunar polar shadowed regions.
Accordingly, we are able to elucidate the dynamics of water ice accumulation & escape in polar lunar craters at geological time scale, and then estimate the scale of ice reservoirs within these specific areas. We also investigate the impact of possible sources of water ice within permanently shadowed regions: a) ice crystals brought by incoming meteorite impacts, and b) water vapor migration from low-latitude regions to high-latitude regions on the lunar surface (4, 5). We further provide projections for the distribution of water ice over a billion-year timescale, which may help the selection of water recovery sites in future lunar missions.

Speaker: Zhenpeng Wang (Peking University)

14:15 Pore-scale study of CH4 hydrate morphology and kinetic behavior by high-pressure microfluidics

Natural gas hydrates (NGH) are ice-like crystalline substances that consist of water molecules acting as host and methane guest molecules and formed at low temperature and high pressure 1. Methane hydrate (MH) has been considered a promising future energy source due to its vast resource volume and high energy density. Understanding the behavior of MH formation and dissociation at pore-scale and the effect of MH distribution on the gas-liquid two phase flow is of critical importance for designing effective production strategies from NGH reservoirs 2. The phase change of NGH from a gas-liquid two-phase system, the evolution of NGH morphology, and the distribution of NGH at the pore-scale provide critical insights into understanding the underlying thermal-hydraulic-mechanical-chemical process [3]. Additionally, depressurization method has garnered significant research attention over the past decades and is widely considered the most promising approach due to its high energy efficiency [4]. This warrants the development of novel experimental techniques to provide direct visual evidence for MH formation and depressurization-induced dissociation and the evolution of gas bubbles in pores.
In this study, we devised a novel high-pressure microfluidic chip apparatus that is capable of direct observation of MH formation and dissociation behavior at pore scale. Fig. 1a shows the experimental apparatus for pore-scale investigation on the microfluidic chip. The entire apparatus consists of four major components: a) a confining pressure holder; b) an etched microfluidic chip, as shown in Fig. 1b; c) a constant flow-rate syringe pump; d) a high-resolution charge-coupled device camera. MH nucleation and growth were conducted under same conditions with Shenhu Sea, South China Sea (P = 15.0 MPa, T = 276.2 K). Depressurization was used to induce MH dissociation at three different BHP of 12.0, 10.0, 8.0 MPa with constant pressure drawdown rates of 7.0 MPa/h at T = 287.7 K.

Fig. 1. (a) picture of the in-house made high-pressure microfluidic; (b) the microfluidic chip used in this study.

Fig .2 shows the evolution of P and T, and MH morphology and gas bubbles during MH dissociation under depressurization. Our experimental results reveal that two types MH formation mechanisms co-exist in pores: (a) porous-type MH formed from CH4 gas bubbles; and (b) crystal-type MH formed from dissolved CH4 gas. Crystal-type MH is relatively stable and its dissociation pressure is lower than that of porous-type MH. MH dissociation in the pores produce obvious aggregation and coalescence, and converge into a continuous gas phase flowing within the pores under depressurization. The experimental results from our study aim to provide a direct pore-scale observation of NGH formation and dissociation and provide a fundamental understating of gas-liquid two phase flow.

Fig .2. (a) Evolution of P of microfluidic chip; and (b) evolution of MH morphology and gas bubbles during MH dissociation under depressurization.

Speaker: Prof. Zhenyuan Yin (Tsinghua Univesity)

14:30 Pore-scale Simulations On The Impacts Of Hydrate Production Approaches On Gas And Water Transport In Hydrate-bearing Sediments

OBJECTIVES/SCOPE
Gas and water transport, which is controlled by the pore characteristics and capillarity in hydrate-bearing sediments (HBS), is one of key factors affecting the gas production. Hydrate production approaches (HPA) can significantly influence the dissociation pattern, affecting the pore structures and the transport of fluids. To elucidate the impacts of HPA, a reactive-transport lattice-Boltzmann (LB) model is applied to describe dissociation evolutions. Then, a phase-field LB model is developed to describe the fluids transport.
Methods
To simulate the dissociation evolutions under different HPA, a reactive-transport LB model, which can describe the hydrodynamic process, conjugate heat transfer and chemical reactions, is applied. To simulate the transport of immiscible fluids, which exist obvious density contrasts, a phase-field LB model with the conservative form of interface-tracking equation is developed to suppress the spurious currents at phase interfaces. To describe the fluid-solid interactions, the bounce-back condition is applied for both solid phases (hydrate and grains) to achieve the non-slip condition and the wettability condition is applied for grains and hydrate to describe the wettability behavior.
Results
After the validations for the LB models, the synthetic structures of HBS were applied in our simulations. Two most common HPA, which are called as depressurization (DP) and thermal stimulation (TS) approaches, were respectively considered to stimulate the hydrate dissociation. The dissociation processes were simulated by the reactive-transport LB model to capture the geometric structure evolutions. Then the steady-state relative permeability measurement processes were simulated by the phase-field LB model for two HPA cases under several hydrate saturations (Shyd). The results showed that because of different dissociation patterns under two HPA, the relative permeability of gas in the TS case is obviously larger than that in the DP case at the same Shyd. This indicates that the TS approach is more conducive to gas production. The reason for this phenomenon is that the void spaces formed in the DP case were dominated by small pores, whereas wide connected paths can be formed in the TS case. In the hydrophilic HBS, water is prone to occupy small pores under capillary pressure, separating the gas and suppressing its transport in the DP case. In the TS case, gas is easily accumulated in connected paths, resulting in higher gas permeability.
Novelty
The phase-filed LB model applied in this study is capable to handle and suppress the spurious currents at phase interfaces, ensuring a satisfactory numerical stability and accuracy. Thus, the real density contrasts between the water and gas under the in-situ thermodynamic conditions can be considered in the simulation. The impacts of HPA on the gas and water transport were quantitively analyzed by simulating multiphase flow processes in HBS.

Speaker: Dr Guan Qin (University of Houston)

InterporeAbstract#472.pdf

InterporeAbstract#472.pdf

14:45 Mineral composition and concrete gradation of sandy clay on CO2 hydrates formation

Sandy clay is the main porous medium for the occurrence of gas hydrates in nature. Hydrate-based technology for CO2 sequestration in marine and permafrost layers is a promising and potential technique. To investigate the influence of formation properties on CO2 sequestration, experiments were conducted under an initial pressure of 5.5 MPa and temperature of 1.27 °C. The influence of different mineral compositions and concrete gradation of sandy clay for CO2 hydrate formation were analyzed. The pressure-temperature changes, CO2 hydrate average formation rate, CO2 consumption, and phase saturation were calculated during the CO2 hydrate formation process. The results show that the CO2 hydrate average formation rate decelerated with the increase of coarse sand proportion due to the reduction of specific surface area, and the CO2 hydrate average formation rate is the smallest when the ratio of fine-grained sand to coarse-grained sand particle sizes (mass ratio of each component, the same below) is 1.0: 2.0, which is 12.60 mmol/min. Montmorillonite is not conducive to CO2 hydrate formation; the CO2 hydrate average formation rate of the sand group (contains fine-grained sand and coarse-grained sand) is higher than that of the sandy clay group (contains fine-grained sand and montmorillonite clay). The experiments in the sand group are more likely to achieve high hydrate saturation and CO2 consumption, making it more suitable for CO2 sequestration in areas with mineral compositions containing fine-grained sand and coarse-grained sand. The CO2 consumption rates for the ratio of fine-grained sand to coarse-grained sand and clay mineral particle sizes of 1.0: 0.5 are 0.86 mol and 0.77 mol, respectively. With the increase in the proportion of coarse-grained sand and clay minerals, both the hydrate saturation and CO2 consumption gradually decrease. The ratio of fine-grained sand to coarse-grained sand and clay mineral particle sizes of 1.0:0.5 is suitable for CO2 sequestration using the hydrate-based technology.

Speaker: Dr Jianzhong Zhao (Key Laboratory of In-situ Property-improving Mining of Ministry of Education, Taiyuan University of Technology, Taiyuan 030024, China)

15:00 Clathrate Hydrates in Porous Media: Application to Low-carbon Fuels in Clean Energy Transition

Carbon capture and sequestration (CCS) plays a crucial role in facilitating low-carbon fuel adoption during the clean energy transition. Clathrate hydrates are solid compounds consisting of gas molecules enclathrated in crystalline lattices formed by water molecules. Specifically, CO2 hydrate has become an attractive way for CO2 capture, storage and long-term sequestration. For CO2 capture, fixed bed reactor (FBR) configuration using porous media was reported to significantly enhance the kinetics of the hydrate-based CO2 separation process. Porous media are beneficial as they can provide more hydrate nucleation sites, tortuous pathways for fluid diffusion and sufficient gas-water contact area. On the other hand, forming CO2 hydrates in deep marine sediment offers a secure solution for long-term carbon sequestration due to their higher density than seawater, high stability under moderate oceanic depths, and low susceptibility to oceanic flow perturbation. It is also possible to sequestrate CO2 in natural gas hydrate reservoirs via CO2-CH4 swapping and bring more economic benefits by recovering natural gas. This work will highlight the research efforts carried out by our group in the aforementioned aspects [1-6] and discuss the key roles of porous media in these hydrate processes. The major challenges and prospects are also identified and highlighted.

Speaker: Junjie Zheng (Department of Chemical and Biomolecular Engineering, National University of Singapore)

15:15 Fluid solid coupling simulation of deep carbonate gas reservoirs based on digital cores

Carbonate gas reservoirs play an extremely important role in global natural gas resources, accounting for approximately 60% of total natural gas production. In recent years, deep carbonate gas reservoirs have become an important area for increasing global storage and production. However, deep carbonate gas reservoirs are buried deep, tight, high-temperature and high-pressure, with diverse types of storage spaces and strong heterogeneity. The flow behaviors under the stress strain mechanism during the production process are unclear, making it difficult to formulate reasonable production systems. To address the aforementioned issues, this article utilizes CT scanning and digital core reconstruction techniques to finely construct 3D digital cores for different reservoir space types such as fracture type, fracture-pore type, and pore-vuggy type. Based on the Darcy Biot fluid structure coupling method, a mathematical model is constructed to couple the flow equations and stress-strain control equations of the matrix, fracture, and vuggy system, and numerical solutions are obtained using the VOF method. Finally, conduct analysis of the influencing factors such as different storage space types, production systems, and reservoir physical properties on fluid flow behaviors and stress-strain distribution characteristics.

Speaker: Dr Ruihan Zhang (Southwest Petroleum University)

14:00 → 15:30 MS18: 3.3

14:00 Microscale study on green remediation of non-aqueous phase liquid contamination in heterogeneous groundwater systems

The presence of non-aqueous phase liquids (NAPLs) like crude oil in groundwater systems is a major environmental concern. Conventional remediation methods often fail to remove NAPLs from low-permeable regions due to subsurface heterogeneity. Surfactants, like Tween80, are commonly used to enhance remediation; however, concerns about their toxicity and resulting secondary contamination remain. This study explored the use of a green bio-derived solvent and several other oil displacing agents for NAPL remediation. Two structurally different heterogeneous micromodels were designed and fabricated to mimic the longitudinal section of the heterogeneous regions of natural aquifers. The results indicated that the heterogeneity of porous media could significantly influence the displacement process and final results. Generally, the injection fluid preferred to flow through the high permeable area with larger pore size and lower flow resistance, resulting less residual oil compared to the low permeable area under various experimental conditions, with an average difference in residual oil saturation of 56.76%. Besides, the bio-solvent could effectively mobilize and remove NAPL residuals from low permeable zones, improving the efficiency of remediation by 30-45%, compared with other agents. Our findings suggest that the bio-solvent is a promising, environmentally-friendly alternative chemical agent for ¬in situ NAPL remediation, offering improved efficiency and reduced secondary pollution.

Speaker: Prof. Xiaopu Wang (China University of Petroleum (East China))

14:15 4D Study of Groundwater Remediation Techniques at Pore-scale

Groundwater remediation is a pressing issue in the modern world. In Brazil, almost 37% of the cities are supplied exclusively with groundwater. In Pakistan, 73% of agricultural irrigation is done with groundwater (Qureshi, 2020). According to Lunardi et al., (2021) groundwater is susceptible to contamination in regions, where pollutant source, such as industry, is present.
In this work, a dataset on nZVI nanoparticle reaction with TCE (trichloroethane) is studied. TCE is a DNAPL – Dense non-aqueous phase liquid. These compounds are challenging to be removed from groundwater aquifers via conventional means, as they are almost immiscible in water, and are difficult to remove from the porous medium. Therefore, nanoparticles used for remediation of such reservoirs must be mobile, to able to reach the contaminant and react with the source of contamination. The dataset was obtained via X-ray microtomographic scanning (X-ray micro-CT) on Diamond Light Source, and allows for 4D (3D + time) study of the processes, happening on the pore-scale. For this experiment, Sibelco sand was used, along with Nanofer 25S and 25DS nanoparticle suspensions.
The studies performed on methods like ones studied in this work usually do not study what is happening on pore-scale. Such study is performed by Pandey, Sharma and Saha (2022) on nZVI nanoparticle production techniques, or by Chen et al., (2021) on slow-release potassium permanganate. This highlights a knowledge gap in the modern understanding of these remediation techniques.
Segmentation process proved to be difficult due to the contrast of resulting images. This was caused by the 4D nature of the study. While this allows us to observe the processes with great precision, it was necessary to make the measurements fast. This, in turn, reduced the contrast of the resulting images. The segmentation was performed using deep learning algorithms in Dragonfly and Annotat3D, and then visualised and analysed in Avizo. Phases, identified during segmentation, included sand grains, water, TCE, nZVI clusters and gas. This is in line with the previous work on the subject by Pak et al., (2020), performed on glass beads.
In addition to this, a new setup has been developed for column experiments. This setup gave us the possibility to investigate liquid and particle dynamics on a larger scale, across a column of approximately 36 cm long 3.5 cm in diameter. With this setup we were able to measure particle distribution through the column after several nZVI injections on different porosities. The novelty of this setup is a magnetic susceptibility sensor, which allows to assess distribution of nanoparticles along the column, as well as to measure the amount of nanoparticles produced from the tube. This method is non-invasive, which allows to re-measure the samples in case of an error, or to obtain greater precision. The objective of these experiments is to perform a series of column experiments on Sibelco sand, using the same nanoparticle suspension as in the 4D micro-CT experiment.

Speaker: Pavel Kazakovtsev (Teesside University)

14:30 Assessment of colloidal gas aphrons stability for soil remediation: experiments and molecular dynamics simulations

Colloidal gas aphrons (CGAs) are layered microbubbles with sizes between 10 and 100 μm and a gas fraction of 40-70% [1]. CGAs can enhance contaminant removal from soil and aquifers due to their low environmental impact, high surface area, versatility, and stability as an alternative to surfactant solutions and conventional foams. Hence, it can physically remove organic contaminants and heavy metals and deliver chemical additives, microorganisms, and oxygen to polluted zones [2].
Prior studies have investigated CGAs' stability and the effect of surfactant-polymer concentrations, salinity, and the impact of stirring rate and time were previously studied at the bubble scale [3], [4]. However, a complete understanding of CGAs' stability and the effect of various physicochemical processes on stability at the interface, specifically at the molecular level with and without contaminants, still needs to be made clear. In addition, understanding the relationship between the interaction of molecules and bubbles requires further elucidation.
This study aims to address the knowledge gap by performing experimental research on the stability of CGAs at a bubble scale and the impact of various surfactant-polymer concentrations. Additionally, to numerically investigate the interactions between CGA components at the atomic level via molecular dynamics (MD) simulations.
The experimental process involves generating CGAs using a base fluid designed by a specific concentration of xanthan gum (XG) polymer in demineralized water by mixing with a digital overhead stirrer at 8000 RPM for 20 minutes [5]. Then, a concentration of sodium dodecyl sulfate (SDS), a surfactant, was added to the base fluid and mixed at the same rotation speed for two minutes to generate CGAs. We performed CGAs with various concentrations for the surfactant (1–10 CMC) and polymer (1000–10,000 ppm). CGAs' bubble size variation was investigated using a Zeiss digital microscope with a charge-coupled device (CCD) camera [6]. The images were analyzed using "ImageJ" software to determine bubble size distribution as a function of time. MD simulations are conducted based on similar surfactants, polymer segments, and water fractions using the GROMACS software.
As a result, the concentration of polymer and surfactant are the main factors affecting the stability of CGAs. At polymer concentrations starting from 6000 ppm, optimal stability and a decrease in bubble size are observed. As the polymer concentration increases, the effect of surfactant concentration on the size distribution of CGA bubbles decreases. As polymer concentration increases, smaller bubbles result from decreased air penetration caused by increased base fluid viscosity. Moreover, MD simulations revealed the intermolecular interactions among polymer segments, surfactants, and water molecules and the detailed interfacial structure. This study concluded that selecting the optimal concentrations of the polymer and surfactant is necessary based on the results of bubble stability testing and MD simulations.

Speaker: Dr Sagyn Omirbekov (National Laboratory Astana - Nazarbayev University)

14:45 A trend prediction model of natural attenuation in groundwater based on machine learning and microbial community

Natural attenuation is a commonly observed phenomenon in most contaminated sites.(Kao et al. 2010; Kawabe and Komai 2019) Natural attenuation describes naturally occurring processes in soil and groundwater that lead to a reduction in the mass, toxicity, mobility, volume, or concentration of contaminants without human intervention.(Jin et al. 2020) Natural attenuation combined with long-term monitoring (known as monitoring natural attenuation, MNA) has been proven to be a resultful remediation technology in petroleum-contaminated sites in which the biodegradation was the mainspring study conduct at contaminant removal.(Chiu et al. 2013; Naidu et al. 2010) Trends analysis and prediction are important segments for MNA application, in which complex biotic and abiotic factors need to be considered.
Microbiome data has been shown to work in combination with machine learning in parsing or predicting the degradation process of organic pollutants.(Bellino et al. 2019; Wijaya et al. 2023) Microbial communities acclimatized themselves to the local physicochemical conditions as well as to the pollutants in a historically contaminated site.(Guo et al. 2019; Yu et al. 2023; Sperlea et al. 2022) Due to their susceptivity to discrepancies of their surroundings, microorganisms could be regarded as “first responders” to environmental changes.(Sperlea et al. 2022) The microbial information carries additional information about environmental conditions and should be of great advantage in simplifying natural attenuation predictions, but there are few reports on this area.
In this work, the long-term monitoring of BTEX/CAHs and microbial community in the groundwater of a pesticide plant was conducted. A machine learning approach for natural attenuation prediction was developed with RFC model followed by either RFR or ANN model, utilizing both microbial information and contaminant attenuation rates for model training and cross-validation. The performance of the models in the prediction of the feasibility and/or rates of natural attenuation of BTEX and CAHs was subsequently evaluated and compared.
Results showed that the RFC model could achieve high accuracy (above 99%) for the feasibility prediction of natural attenuation for both BTEX and CAHs, and could successfully identify the key functional microbial genera. The RFR model was sufficient for BTEX natural attenuation rate prediction, and the MAPE was 8.1% ~ 19.6%. However, the predicted natural attenuation rates of CAHs by RFR were unreliable, with the MAPE as high as 22.0% ~ 153.9%. The ANN model showed better performance in the prediction of attenuation rates for both BTEX (with MAPEs from 2.1% to 4.6%) and CAHs (with MAPEs from 6.9% ~ 19.7%). Based on the assessments, a composite modeling method of RFC and ANN models was proposed, which could reduce the MAPE to as low as 2.1% ~ 4.6% for BTEX and 6.9% ~ 19.7% for CAHs. This study reveals that the combined machine learning approach under synergistic use of site microbial data has promising potential for predicting natural attenuation.

Speaker: Dr Xiaodong Zhang (Nanjing Institute of Environmental Sciences, Ministry of Ecology and Environment of China)

15:00 Numerical modeling of the PFAS Fate in a Former Firefighting Training Site in Korsør, Denmark

The extensive use of products containing high concentrations of Per- and Polyfluoroalkyl Substances (PFAS) has led to the spreading of such “forever chemicals” in soil and groundwater In certain locations, like Korsør in Denmark, a former firefighting training site, PFAS have been detected in the vadose zone in measurable amounts 1. Studies in such areas are crucial for understanding the PFAS behavior in subsurface soil layers.
This numerical model focuses on the transport behavior of four PFAS (per-fluoro butanoic acid-PFBA, per-fluoro octanoic acid-PFOA, per-fluoro decanoic acid-PFDA, and per-fluoro octane sulfonic acid-PFOS) in the vadose zone, with emphasis placed also on potential PFAS leaching into groundwater. For this purpose, a 3D domain has been constructed, with dimensions 8 m in depth and area 100m2 consisting of multiple soil layers with various initial water saturation levels (Figure 1). The great variety of soil types necessitates enhanced model accuracy [2], achieved through a Python code that analyzes the geological layers of the site. This code interprets different colors in the geological model (each color representing a distinct soil layer) as layers of varying permeability and effective diffusivity, by utilizing background knowledge from literature [3].
In this study, the Richards equation is employed to model fluid transport within unsaturated porous media in the COMSOL platform by utilizing the Multiphysics module [4]. This equation is integrated with the van Genuchten approximation [5] for defining relative permeabilities in relation to effective saturation.
In addition to the well-known transport mechanisms, such as convection, diffusion, and dispersion, PFAS adsorption plays a significant role in the retention process [6]. The present approach considers that PFAS adsorption occurs on both the solid grain-water interfaces and the air-water interfaces. The PFAS sorption coefficients on air/water interfaces were estimated by fitting curves of the water/air surface tension as function of PFAS concentration with the Langmuir-Szyszkowski equation or were taken from literature [7]. The kinetics of PFAS sorption on solid/water interfaces was estimated with inverse modeling of the relevant breakthrough curves of soil column experiments or were taken from literature [8].
The spatial-and-temporal distribution of the concentration of four PFAS compounds (PFBA, PFOA, PFOS, and PFDA) is detected as they percolate through the vadose zone until reaching the aquifer by accounting for the unique properties of each PFAS [8]. Multiple scenarios are tested, starting with the initial state of soil (whether saturated or unsaturated) and extending to various soil types, different initial PFAS concentrations, and varying precipitation rates. Precipitation plays a crucial role as it stimulates the convection mechanism. Additionally, the retention factor is estimated to be significant, particularly as the initial PFAS concentration increases. The different scenarios of PFAS motion in subsurface have generated insightful results, regarding strategies for soil treatment.
Acknowledgments
This work was performed under Grant Agreement 101037509 — SCENARIOS — H2020-LC-GD-2020 / H2020-LC-GD-2020-3 (project title: “Strategies for health protection, pollution Control and Elimination of Next generAtion RefractIve Organic chemicals from the Soil, vadose zone and water” - acronym “SCENARIOS”) supported by the European Commission.

Speaker: Dr Christos Tsakiroglou (Foundation for Research and Technology Hellas - Institute of Chemical Engineering Sciences (FORTH/ICE-HT))

15:15 Conducting Monitored Natural Attenuation: Microbial communities hold the answers

The application of Monitored Natural Attenuation (MNA) technology has been widespread, while there is a paucity of data on groundwater with multiple co-contaminants. This study selected a high permeability and low hydraulic gradient with BTEX (benzene, toluene, ethylbenzene, and xylenes), chlorinated aliphatic hydrocarbons (CAHs) and chlorinated aromatic hydrocarbons (CPs) co-contamination to unravel the responses of microbial communities during natural attenuation processes. The results showed that the diversity and composition of groundwater microbial community exhibited greater variation horizontally than vertically. Groundwater microbial community was primarily shaped by the total quantity of contaminant (r = 0.722, p < 0.001), and BTEX would have a more significant influence on community diversity than CAHs or CPs especially at high zone. The groundwater microbial community assembly was governed more by deterministic processes (βNTI < −2) than by stochastic processes in high contaminants concentration zone and showed an opposite trend at low-concentration zone (|βNTI| < 2). The co-occurrence relationships among microorganisms indicated that the differences in degradation mechanisms at various depths. This study provided a better ecological understanding for preparation of long-term monitoring plan at further MNA practices of deep thick and multiple co-contaminants aquifers.

Speaker: Ms Lu Yang

14:00 → 15:30 MS23: 3.3

14:00 Pore-scale investigation of forced imbibition in natural rocks through interface curvature and pore topology analysis

Forced imbibition, which involves the invasion of a wetting fluid in natural rocks, plays an important role in efficient development of hydrocarbon resources and geological storage of carbon dioxide. However, the interface dynamics influenced by complex topology lead to non-wetting fluid trapping, particularly the underlying mechanisms under viscously unfavorable conditions remain unclear. This work reconstructs digital rocks of sandstone to simulate forced imbibition by direct numerical simulation methods. The interface dynamics and fluid-fluid interactions are investigated through transient simulations, while the pore topology metrics are introduced to analyze the impact on steady-state residual fluid distribution obtained by a pseudo-transient scheme. Results show that the cooperative pore-filling process promoted by corner flow is dominant at low capillary numbers; the inlet pressure, mass flow, and interface curvature are unstable, corresponding to complicated interface dynamics and higher residual fluid saturation. The interface curvature gradually increases during forced imbibition, with the pore-filling mechanisms involving the cooperation of main terminal meniscus movement and arc menisci filling. Complex topology with small diameter pores may induce instability of interface curvature. Residual fluid saturation is negatively correlated with porosity and pore throat radius, and positively correlated with tortuosity and the aspect ratio associated with pore throat radius. A large mean coordination number characterizing global connectivity promotes imbibition. While the high connectivity characterized by standardized Euler number corresponding to small pores has a high probability of non-wetting fluid trapping.

Speaker: Jianchao Cai (China University of Geosciences, Wuhan)

14:15 Pore scale insights on multi-component multi-phase fluid transport phenomena in multi-scale shale pore-fracture system

The heterogeneities of shale pore system are expressed in terms of the complex pore-fracture structure, different pore type and multi-scale pore size. Fluid transport mechanisms in shale nanopore space notably differ from that in conventional micro-scale porous media. Conventional core-scale multi-phase flow experiments are not applicable to shale because of the nanoscale pore size and the realistic multi-component multi-phase fluid flow patterns in shale are still unknown to a large extent. Therefore it is essential to study the pore-scale fluid transport mechanisms and establish the corresponding flow simulation method.
This work summarizes our recent study on multi-component multi-phase fluid transport mechanisms in shale by pore network modelling and level-set approach. We first constructed the multi-scale pore network model based on dual resolution scanning electron microscope images. The pore network multiphase flow model (PNMFM) in organic pore system is established considering nano-micro scale gas and water transport mechanisms. PNMFM in dual pore type (organic-inorganic) system is further proposed considering the influence of pore type and wettability on gas-water distribution. We further developed a general pore network-based three-phase thermodynamic equilibrium and transport model, which enables accurate prediction of multicomponent hydrocarbon−water transport properties in shale at different temperatures and pressures. Fluid flow in complex fracture systems near wellbore is influenced by heterogeneous fluid pathway structure, proppant distribution, and stress-induced fracture aperture change. To deal with this, we developed the physics-driven level set lattice Boltzmann method -coupled model to study multiphase flow properties in complex fractures during injected water flowback and proposed the upscaled relative permeability models of induced fracture network and hydraulic fracture with proppant.

Speaker: wenhui song (China University of Petroleum)

14:30 Competition between main meniscus flow and corner film flow in strongly wetting porous media: a pore network study

Wetting film can develop in the corners of pore structures during imbibition in a strongly wetting porous medium, which may significantly influence the two-phase flow dynamics. Due to the large difference in scales between main meniscus and corner film, accurate and efficient modeling of the dynamics of corner film remains elusive. In this work, we develop a novel two-pressure dynamic pore network model incorporating the interacting capillary bundle model to analyze the competition between main meniscus and corner film flow in real porous media. A pore network with four-point-star-shaped pore bodies and throat bonds is extracted from the real porous medium based on the pore shape factor and pore cross-sectional area, which is then decomposed into several layers of sub-pore-networks, where the first layer of sub-pore-network simulates the main meniscus flow while the upper layers characterize the corner film flow. The accuracy of the developed model is validated with lattice Boltzmann simulation of imbibition in a strongly wetting square tube and microfluidic experiments of imbibition in strongly wetting porous structures. Then the model is used to simulate imbibition in a strongly wetting sandstone porous medium and the competition between main meniscus and corner film flow is analyzed. Wettability is the most significant parameter controlling corner film flow. The wetting film can develop in the corner only when the contact angle is below a critical value. Under a constant capillary number and viscosity ratio, the corner film flow becomes more significant with the decrease of contact angle. For a small contact angle, a phase diagram characterizing the competition between main meniscus and corner film flow is proposed, dominated by the capillary number and viscosity ratio between wetting and non-wetting fluids. In general, with the decrease of capillary number and viscosity ratio, the wetting corner film flow becomes more significant. The snap off phenomenon caused by swelling of wetting corner film is also analyzed, which happens more frequently with the more pronounced wetting corner film. In addition, the frequency of snap off phenomenon increases with the size ratio between pore body and throat bond. This work deepens our understanding on the imbibition mechanisms under strongly wetting conditions, which provides basic theories for imbibition related engineering processes, such as geological carbon or hydrogen storage.

Speaker: Prof. Jianlin Zhao (China University of Petroleum-Beijing)

14:45 Bridging the Gap: Connecting Pore-Scale and Continuum-Scale Simulations for Immiscible Multiphase Flow in Porous Media

Our work aims to bridge length scales in immiscible multiphase flow simulation by connecting pore-scale and continuum-scale simulations through a novel validation framework. We employ Niessner and Hassnaizadeh's (2008) continuum-scale model for multiphase flow in porous media, combined with McClure et al.'s (2020) geometric equation of state, to provide a complete set of geometrical measures. Pore-scale fluid configurations simulated with the Lattice-Boltzmann method are used to validate the continuum-scale results. We propose a mapping from the continuum-scale to pore-scale utilizing a Generalized Additive Model to predict non-wetting phase Euler characteristics during imbibition, effectively bridging the continuum-to-pore length scale gap. Other continuum-scale simulated measures of specific interfacial area, saturation, and capillary pressure are directly compared to up-scaled pore-scale simulation results. Overall, the proposed framework provides reasonable front profiles for saturation, capillary pressure, specific interfacial area, and Euler characteristic for an imbibition process.
The described workflow advances the modelling of immiscible multiphase flow by establishing a transparent connection between pore-scale and continuum-scale simulations, supported by fundamental thermodynamic and geometrical principles. Furthermore, the generated results for the Lattice-Boltzmann simulations demonstrate that utilizing the fluid configurations obtained from the outcomes of pore-scale simulations not only offers analytical references for validating the continuum-scale simulations but also serves as an interface to compare pore-scale and continuum-scale simulations. Future work remains for evaluating the extended multiphase flow model and our proposed framework for flow reversal processes such as drainage followed by imbibition.

Speaker: Mohammad Ebadi (University of New South Wales)

15:00 Multiscale Simulation Study on Residual Trapping in Subsurface Rocks with Clay Minerals: Implications for Geological Carbon Storage

Geological carbon storage is a promising and feasible technique for greenhouse gas mitigation. To improve CO2 storage efficiency and develop monitoring techniques, it is important to know the CO2 flow behavior and capillary trapping mechanisms in subsurface rocks. Clay minerals, often found in sandstone, may exert a vital impact on the displacement process. However, the diversity of rock components, notably clay minerals, has been consistently overlooked in previous studies. In this study, we presented a new concept, namely, digital rock physical chemistry, by integrating molecular-scale and pore-scale simulations to investigate CO2 residual trapping mechanisms in porous systems, for high-efficiency geological carbon storage. A digital rock with kaolinite clay minerals is used for the porous media. The decane, CO2, and their mixtures are used as the fluid to be displaced. The intrinsic physicochemical properties, including the fluid viscosity, the fluid-water interfacial tension, and the fluid-water-mineral wettability at varying CO2 concentrations, are investigated using molecular dynamics simulation. These molecular-scale properties are then upscaled into a core/pore-scale system with the help of lattice Boltzmann simulation. The results are summarized into a 3D phase diagram, which reveals the non-monotonic variations of the initial-residual (I-R) curves across different CO2 concentrations. Although the obtained I-R curves in oil and CO2 displacement exhibit similar trends, the trapping characteristics, including residual saturation and fluid distributions, differ. These findings underscore the critical roles of molecular scale interfacial phenomena and rock surfaces, particularly those related to kaolinite clay minerals, in subsurface multiphase seepage and geological carbon storage, highlighting the importance of digital rock physical chemistry.

Speaker: Dr Yunfeng Liang (The University of Tokyo)

15:15 Harnessing the power of microstructure imaging through open data, software and education: past, present and future of Digital Rocks Portal

Modern 3D imaging provides a window to the microstructure of soil and rocks, and recent advances in experiments, simulation and data science can improve our understanding of how these materials influence the world around us. The Digital Rocks Portal (DRP, https://www.digitalrocksportal.org) is the first platform of its kind for porous media images’ management. It has an impressive collection of experimentally captured multiphase x-ray microtomography configurations. The open science materials surrounding the platform follow Dr. Wildenschild’s vision closely.

History of the portal: It is less known is that the precursor of the portal was inspired by Dr. Wildenschild. Drs. Wildenschild, Peszynska and Prodanovic recognized in 2008 and had many discussions on the need for validation and comparison of experimental, theoretical and numerical approaches. We organized a Wiki page Pore Scale Benchmark project 2009-11 (now deprecated) with links and descriptions of related data and code. The data required dedicated storage and support, however, beyond what a wiki page is meant to provide: open science is not free, and requires resources. This project was a pre-cursor of Digital Rocks Portal which went live in 2015 with the help of two National Science Foundation (NSF) grants and you can find many of Prof Wildenschild’s datasets on DRP.

History of short courses: Prof. Wildenschild is a visionary educator. Once upon a time in 2010, and despite an explosion of available x-ray microtomography and SEM images providing insight into rock microstructure, structured courses on image-based quantification within relevant graduate programs were mostly unavailable. Prof. Prodanovic approached Prof. Wildenschild and Prof. Sheppard (Australian National University) with an idea to teach a short course on image analysis in porous media in 2010. We together created the first short course and workshop in July 2011 at The University of Texas at Austin. The course was repeated in 2013 at InterPore Society Annual Conference 2013 and was one of the first InterPore short courses. We all separately developed full length graduate courses at our home institutions, followed by the courses taught connected to both Digital Rocks Portal platform and InterPore Academy.

Present: DRP has an active community that publishes and reuses the data, most recently in multiple machine learning applications. We have 155+ published datasets (projects) cited in 210+ published papers and are expanding the scope to curate energy storage materials. The platform has been rebuilt on the new infrastructure in Texas Advanced Computing Center from Jan to May 2024.

Future: We present the new digital porous media open source software tools related to the portal. Those include: gray-scale image processing, and visualization; an automatic scale-independent method for classifying rock heterogeneity of binarized images; (2) velocity field analysis and visualization, (3) flow simulation and (4) machine/deep learning. We are thus close to having an open science environment for cross-validation and data-driven upscaling of microstructure properties in subsurface engineering, material science and geosciences.

Speaker: Masa Prodanovic (The University of Texas at Austin)

16:05 → 17:40 Poster: Poster Session VI

16:10 An efficient numerical simulation of coupled thermo-hydro-mechanical processes in deep tight gas reservoirs

Deep tight gas is an important unconventional natural gas resource, and it is an important target of exploration and development in recent years. Deep tight gas reservoirs are high-temperature, high-pressure, and high-stress with complex gas–water relationships, and its occurrence and flow mechanisms are still unclear, making the simulation of deep tight gas reservoirs still a challenging problem. Aiming at the key problems faced in the development of deep tight gas reservoirs, this paper establishes a flow-stress-temperature field coupled mathematical model and numerical model, studies the thermo-hydro-mechanical sequential decoupling method to solve the coupled mathematical model, and forms a multi-field coupled simulation technology which provides theoretical support for the development of deep tight gas. Based on the thermo-hydro-mechanical coupling calculation module, this paper conducts research on the influence of thermo-hydro-mechanical multi-field coupling parameters on the production and development performance, and it further verifies the practicability of our proposed model in real
reservoirs.

Speaker: Prof. Zhaoqin Huang (China University of Petroleum (East China))

16:10 Buoyancy-driven dissolution instability in a horizontal Hele-Shaw cell

The dissolution of minerals within rock fractures is fundamental to many geological processes. Previous research on fracture dissolution has highlighted the significant role of buoyancy-driven convection leading to dissolution instability. Yet, the pore-scale mechanisms underlying this instability are poorly understood, primarily due to the challenges in experimentally determining flow velocity and concentration fields. Here, we integrate pore-scale simulations with theoretical analysis to delve into the dissolution instability prompted by buoyancy-driven convection in a radial horizontal geometry. Initially, we develop a pore-scale modeling approach incorporating gravitational effects, subsequently validating it through experiments. We then employ pore-scale numerical simulations to elucidate the 3D intricacies of flow-dissolution dynamics. Our findings reveal that a simple criterion can delineate the condition for the onset of buoyancy-driven dissolution instability. If the characteristic length falls below a critical threshold, dissolution remains stable. Conversely, exceeding this threshold leads to two distinct regimes: the unstable regime of the confined domain affected by the initial aperture, and the unstable regime of the semi-infinite domain independent of the initial aperture where the instability is no longer influenced by the lower boundary. We demonstrate that the pore-scale mechanism for this instability is due to the concentration boundary layer attaining a gravitationally unstable critical thickness. Through theoretical analysis of this layer and the timescales of diffusion and advection, we establish a theoretical model to predict where the dissolution instability occurs. This model aligns closely with our numerical simulations and experimental data across diverse conditions. Our work improves the understanding of buoyancy-driven dissolution instability in radial horizontal geometry. It is also of practical significance in understanding cavity formation in karst hydrology and preventing leaks in geological $CO_2$ storage.

Speaker: Kai Li

16:10 Characterization of water flow behavior during spontaneous imbibition in coal: From the perspective of fractal theory and NMR tests

The spontaneous imbibition (SI) of water plays a crucial role in determining the wetting effect of water injection in coal seams. It is important to explore water flow behavior in coal during the SI. Contact angle measurement, SI experiment, and low-field nuclear magnetic resonance (LF-NMR) tests have been conducted to measure the properties of coal plugs from five different regions of China. The mass change of the coal by SI is related to the square root of time divided into three-stage linear functions in which the slope represents the imbibition rate of coal. The imbibition rate decreases with the increased SI time. The contact angle of bituminous coal is smaller than that of anthracite. It is negatively proportional to the SI rate and capacity index C. Water is primarily stored in the adsorption and seepage pores and little in microfractures. It shows that the fractal dimensions of the partial free pore (Db) and total pores (D) decline in the form of power law, while the fractal dimension of the free pore (Dz) declines irregularly. D-10 and D10 are strongly linear with the T2 spectrum area of adsorption pores, seepage pores, and microfractures, respectively. It indicates that e the low-probability measurement area represents the adsorption pores, and the high-probability measurement area represents seepage pores and microfractures. Adsorption pores play an important role during SI. The difference between the amplitude change of adsorption pores and that of seepage pores/microfractures is the key factor affecting multifractal parameters of T2 spectra. The linear relationship between H and Db reveals that water preferentially enters a pore with lower roughness and better connectivity during SI. The process of SI has been divided into three stages in terms of SI rate. The water transport process within the coal at different stages has also been discussed. The results of this work are of great significance for optimizing the coal seam water injection and reducing the risk of underground coal mine disasters.

Speaker: Dr Xu Yu

16:10 Connectivity of multiscale porous structures of shale rocks based on multiscale imaging analysis

Pore connectivity is a critical factor influencing the migration and production of shale gas (Sun et al., 2017). However, the inherent heterogeneity of shale, characterized by the development of various pore types (Loucks et al., 2012; Ma et al., 2017), renders the detailed and quantitative characterization of shale pore connectivity challenging (Zhao et al., 2020). The advancement of imaging technologies at different scales has facilitated the assessment of pore connectivity. In this study, we aim to investigate the pore structures and pore connectivity of the Longmaxi Formation shale in the Sichuan Basin. Imaging data include scanning electron microscope (SEM) and focused ion beam scanning electron microscopy (FIB-SEM). Machine learning algorithms were applied to shale image segmentation, revealing the development of distinct pore types. Additionally, high-pressure mercury intrusion and nitrogen adsorption experiments were employed to evaluate pore distributions and connectivity. The results demonstrate that machine learning-based image segmentation techniques effectively delineate various pore types on MAPS, including organic matter and clay ratios, as well as facial size characterization. The connectivity of organic matter pores is intricately linked to pore types, with honeycomb-like organic pores exhibiting the largest average pore diameter and good connectivity, followed by mixed organic pores. However, the latter lacks permeable channels at the FIB-SEM resolution. Sponge-like organic pores exhibit the poorest connectivity and porosity. Pores with a size smaller than 30 nm, which FIB-SEM cannot identify, significantly contribute to the connectivity of organic pores.

Speaker: Zhiwei Wang (重庆大学)

16:10 Determination of gas content in shale by adsorption and desorption experiment

Shale gas is a natural gas accumulation mainly located in shale rock series, with adsorption and free state as the main modes of existence, whose content directly affects the cumulative production, gas well’s productivity and life, and is an important index for selection of exploration blocks and reservoir’s evaluation. The determination methods of gas content in shale mainly include desorption method, isothermal adsorption and logging interpretation. In this paper, desorption method is adopted in production experiment with pressure reducing to study the gas content in shale. The results show that the production process of shale gas can be divided into three stages, namely, the lost gas escaping stage, the rapid desorption stage and the slow desorption stage. The production rate is the highest in the initial stage of pressure-reducing production. After entering the stable production period, the gas production rate remains stable but the stable period is short, and then the gas production rate gradually decreases. The proportion of gas loss in shale decreases with the increase of pressure drop rate, accounting for 40%~50% on average, so the core should be lifted quickly during the coring process in the field to reduce the gas loss. In this paper, the experimental method of restoring shale to its original state and then producing with pressure reducing is helpful to improve the accuracy of gas content determination in shale, and can provide basis and reference for the actual exploitation of shale gas.

Speaker: Dr Jian Guan (China University of Petroleum(East China))

16:10 Establishment and analysis of characterization model of oil-water flow energy consumption in porous media

Due to the law of flow energy consumption in the porous media process is relatively vague, in order to effectively control the energy consumption in the process of oil production by water flooding, a characterization model of oil-water flow energy consumption in porous media during oilfields water flooding development is proposed. The influencing factors of reservoir energy consumption under different reservoir geological parameters and different production scheme are analyzed.Through fluid mechanics, the energy conversion relationship among potential energy, pressure energy and kinetic energy in the reservoir is studied. Through Bernoulli equation, the changes of water injection energy, oil production energy and formation elastic energy in reservoir are transformed into the changes of formation pressure. And the energy consumption characterization model of reservoir is established. Through the numerical simulation technology, the pressure, flow and velocity distribution of the reservoir are simulated, and the injection energy, the consumption energy and useless consumption ratio of the whole reservoir are calculated through the flow relationship in the reservoir.Firstly, the energy consumption characterization model of the reservoir subsystem is established by considering the injection energy, production energy and formation energy (potential energy, kinetic energy and pressure energy) of the reservoir system during oil production process. The oil-water flow energy consumption model in porous media is verified by different production systems in the ideal model. With the reservoir development by water injection, the water cut increases gradually, the proportion of energy consumption decreases gradually, but the energy consumption per tonne oil increases gradually. Then, the influence of geological parameters such as permeability and viscosity on energy consumption of reservoir system is considered. Under the same water cut, the energy consumption and its proportion of reservoir system increase with the decrease of permeability and the increase of viscosity. In addition, under the low permeability and high viscosity, the proportion of energy consumption of reservoir is nearly 100%. Finally, the influence of production parameters such as well spacing on energy consumption of reservoir system is considered. Well spacing has little effect on the energy consumption and its proportion of reservoir system. Formation pressure has little effect on the energy consumption,but its proportion decrease with the increase of formation pressure.The characterization model of oil-water flow energy consumption in porous media can quantitatively represent the energy completely lost due to friction in reservoir. Study on the law of oil-water flow energy consumption in porous media can effectively improve production efficiency, reduce useless energy consumption and oil production costs.

Speaker: Yajie Bai

16:10 Estimating sub-core permeability using multiple coreflooding experiments

Coreflooding experiments are used regularly for reservoir rock characterization and have been developing in recent years. Investigation of sub-core phenomenon has been a topic of wide interest and estimating sub-core permeability distribution k(x,y,z) is important for that, and also for constructing accurate coreflooding models. This work presents a method for estimating permeability, combining data from multiple coreflooding experiments including different flowrates and fraction of injected fluids. Furthermore, the estimation accuracy considering a large number of physical parameters was studied. The method is shown to significantly improve the estimation accuracy in comparison to methods that incorporate data only from a single experiment which was studied in our previous work.

Speaker: Yanjing Wei (Tel Aviv University)

16:10 Evolution characteristics and quantitative model of shale porosity for Wufeng-Longmaxi Formation in southern Sichuan Basin, China

Shale is not only a source rock, but also a reservoir rock, and its porosity evolution characteristics have an important influence on the generation, migration and accumulation of oil and gas in the shale formation. By means of integrated experiments of hydrocarbon generation simulation, conventional-overburden porosity analyses, and field emission-scanning electron microscopy (FE-SEM) imaging, the porosity characteristics of Wufeng-Longmaxi Formation at different well locations in southern Sichuan Basin of China were studied. The evolution patterns and influencing factors of inorganic porosity, organic porosity and total porosity were discussed, and a quantitative model of porosity evolution in this area was established. The results show that with the increase of effective pressure, the total porosity gradually decreases, but the rate of decrease gradually slows down, and its variation characteristics are affected by the contents of total organic carbon (TOC) and clay minerals. Inorganic porosity is mainly controlled by burial depth; with the increase of depth, inorganic porosity continuously decreases. In addition, she main factors affecting the extent of organic porosity include TOC contents, organic matter maturity and burial depth. The evolution patterns show that the porosity in this area generally shows a trend of initial rapid decrease, then slow decrease and finally gradual increase. Among them, in the early stage of formation burial, the inorganic porosity decreases rapidly and then slowly, while the organic porosity increases rapidly & slowly and decreases gradually. Furthermore, the overall total porosity decreases continuously, but shows a slow increase trend in the later uplift stage.

Speaker: Guangshun Xiao (China University of Petroleum (East China))

16:10 Experimental and simulation study on enhanced oil recovery of sandstone reservoir in high water cut stage

Sandstone reservoir has good porosity and permeability, which is one of the main oil and gas reservoirs and the focus of oil and gas resources development. Water injec-tion development is the main way of sandstone reservoir development, but with the continuous increase of development time, the water cut of the reservoir is increasing, a large number of reservoirs are in the high water cut stage, and the efficiency of water injection development is decreasing. Therefore, it is very important to master the formation and distribution characteristics of remaining oil in high water cut reser-voir and its producing mechanism for the further development. In this paper, the remaining oil in the core pores of the high water cut stage is visualized on the micron scale by CT scanning, and the oil-water flow simulation and the remaining oil produc-tion simulation are carried out based on the digital core technology. The results show that the distribution of remaining oil in high permeability reservoirs is less but more dispersed, and the remaining oil in low permeability cores is more connected. The remaining oil content of high viscosity crude oil reservoir is high. By reducing the in-terfacial tension, the water phase can invade more pores to achieve the effect of remaining oil production. This study is helpful to guide the high water cut sandstone reservoir to take measures to further improve the recovery rate and realize the further development of the reservoir.

Speaker: Mr Tao Wang (State Key Laboratory of Oil and Gas Resources and Exploration of China University of Petroleum ( Beijing))

16:10 Feasibility analysis of long-term CO2 sequestration as hydrates in South China Sea marine sediments

Hydrate-based CO2 sequestration in subsea sediments is a promising way to reduce carbon emissions. However, current studies mainly focused on lab experiments and lacked long-term and field-scale feasibility analysis. Here, we developed a novel multi-field coupled simulator CO2_HYD based on the state-of-art TOUGH + HYDRATE code to study the evolution of multiphase and multicomponent seepage during sequestration and effect of hydrate formation on sequestration performance. Then we verified the feasibility of this sequestration method in South China Sea at field-scale and quantitatively analyzed effects of key geological parameters (i.e., permeability, salinity and thermal conductivity) on sequestration performance. Results revealed that CO2 component exists mainly as liquid and dissolved phases during CO2 injection, with very little hydrate formed above the injection interval due to the high-temperature area around the well. After the end of injection (t > 5 y), the temperature around the well decreases rapidly, and a large amount of hydrate forms and gradually expands to form a low-permeability cap. At t = 100 y, the mass fraction of liquid CO2 is ~17%, dissolved CO2 is ~41%, and CO2 in hydrate phase is ~42%. The phenomenon of massive hydrate formation during sequestration which greatly restricts upward CO2 migration verifies the long-term stability of hydrate-based CO2 sequestration at field-scale. In addition, permeability, salinity and thermal conductivity all have significant impacts on the sequestration performance. The conversion of liquid CO2 to CO2 hydrate decreases with increasing permeability and salinity, and increases with increasing thermal conductivity. Our work provides confidence for on-site implementation of hydrate-based CO2 sequestration, and offers guidance for target area selection and sequestration scheme optimization.

Speaker: Mr Yuhang Gu

16:10 Feasibility study on improving oil recovery and geological storage via CO2 microbubble flooding in high water cut oil reservoirs

Background, Aims and Scope. Investigating novel techniques and theories to enhance reservoir recovery and improve effectiveness in CO2 storage is crucial in the context of the multiple pressures and engineering challenges associated with CO2 emission reduction and improving oil field recovery. It is common knowledge that CO2 flooding is a vital methodology to improve oil reservoir recovery. Nevertheless, the efficiency of CO2 flooding is severely limited by the gas channeling effect, the strong preferential flow pathway effect, and the challenge of mixing CO2 and crude oil during high water cut periods. Therefore, novel techniques have been developed to enhance reservoir recovery and ensure efficient storage of CO2. The objective is to inject CO2 microbubbles into high water cut oil reservoirs, aims to increase oil displacement ratio and production in the short term, while also achieving long-term CO2geological storage.
Methods. The feasibility of CO2 microbubbles in enhancing oil recovery in high water cut reservoirs whilst achieving long-term CO2 storage was thoroughly examined through microfluidic experiments, nuclear magnetic resonance online displacement experiments, and finite element numerical simulations.
Results and Discussion. (1) The high solubility characteristics of CO2 microbubbles result in a significant amount of CO2 dissolving in the oil phase. This, in turn, reduces the viscosity of crude oil and improves the sweep efficiency; (2) The dimensions of microbubbles correspond to the pore size of rocks. Therefore, they can be used to fill the pores of low-permeability reservoirs. This process significantly enhances the displacement and recovery of crude oil from the micro-nano pores; (3) CO2 microbubbles are able to penetrate smaller pores. Results from microfluidic experiments demonstrate that the capillary storage efficacy of CO2 microbubbles is greater than that of CO2 directly injected; (4) The high solubility characteristics of CO2 microbubbles will significantly improve the efficiency of CO2 dissolution storage, and the high mass transfer efficiency characteristics will significantly strengthen the geochemical reaction between carbonated water solution and rocks, effectively shortening the time required for chelation reaction, and achieving stable mineralization storage of CO2.
Conclusion. In this paper, experimental and simulation results show that CO2 microbubbles have strong feasibility in achieving enhanced oil recovery and geological storage in high water cut oil reservoirs. Furthermore, we will select typical high water cut oil reservoirs in China to conduct large-scale and long-term physical simulation experiments, further evaluate the feasibility, and propose targeted filed practice measures and process flows.
Key words: high water cut oil reservoir; CO2 microbubbles; enhanced oil recovery; storage CO2

Speaker: Yijun Wang (Southwest Petroleum University)

16:10 How does surface salt crystallization influence saline water evaporation from porous media in the presence of a water table?

Saline water evaporation from soil is ubiquitous in many environmental and hydrological processes such as soil water evaporation, vegetation and crop production. It plays an important role on soil salinity influencing soil health and ecosystem functioning. When the salt concentration in soil substantially exceeds its solubility limit as a result of water evaporation, salt crystallization occurs (1). Although how different parameters such as type of salt, soil texture, angularity of the grains, presence of a water table and atmospheric condition influence the formation (1-6), patterns and dynamics of crystallization is relatively well understood, how exactly the presence of crystalized salt influence the evaporation dynamics is poorly understood with the majority of the previous investigations offering qualitative description. We thus aimed at quantifying the effect of crystallized salt on dynamics of saline water evaporation from porous media under controlled laboratory conditions. To do so, three sets of experiments were conducted using NaCl solutions of 10%, 15%, and 20% (mass basis) in a climate chamber with constant air temperature and relative humidity of 30 °C and 30%, respectively. Sandy soil with particle sizes ranging from 0.4 to 0.8 mm and density of 2.65 gr/cm3 was used as the model porous medium packed in cylindrical glass columns (20 cm height - 8 cm diameter). The columns were supplied from Marriott’s flasks to keep the columns fully saturated during the evaporation experiments. Mass loss from sand samples was measured digitally while crystallization dynamics and their corresponding thermal signatures were monitored with a high resolution optical camera and a thermal imager, respectively. This setup enables us to quantify the contribution of crystalized salt on evaporation. Our preliminary results highlight the key role of salt crystallization on changing evaporation dynamics from sand columns relative to the reference sample supplied with freshwater. Despite the impact of salinity in reducing saturated vapor pressure, we observed enhanced evaporation rates from samples with crystalized salt at the surface by a factor of 4 to 12 (depending on the salt concentration). Furthermore, highly resolved surface temperature dynamics recorded by the thermal camera enabled us to investigate the correlations between the intermittent temperature fluctuations of salt crystals and the evaporative flux from the surface. Our findings provide new insights regarding how the presence of crystalized salt at the surface influences the soil evaporation dynamics.

Speaker: Sahar Jannesarahmadi (Hamburg University of Technology)

16:10 Hydro-Mechano-Reactive Flow Coupling in Acid Fracture Propagation: A Phase Field Modeling Approach

The acid fracturing process involves the formation of wormholes and the propagation of fractures, which interact with each other. Wormhole formation leads to changes in porosity, permeability, and rock mechanical parameters, thereby affecting fracture propagation. Conversely, the formed fracture significantly affects reactive transport. In order to capture this interaction, a modified phase field model has been developed to comprehensively consider the hydro-mechano-reactive flow coupling effect during the acid fracturing process. Drawing inspiration from the two-scale continuum method, the proposed model solves fluid flow, concentration diffusion, mechanical deformation, and phase field evolution at the Darcy scale while capturing the variation of porosity, permeability, and rock mechanical parameters at the pore scale. The displacement field is discretized using the finite element method, and the pressure and concentration fields are discretized using the finite volume method. An efficient iterative scheme is proposed to solve the fields based on the fixed-stress split method. Method verification and numerical calculations are performed to investigate the interaction between wormhole formation and fracture propagation.

Speaker: Dr Qingdong Zeng (Shandong University of Science and Technology)

16:10 Impact of wettability on supercritical CO2 transport and local capillary trapping in deep saline aquifers

Given its immense storage capacity, geological CO2 storage in saline aquifers is regarded as a promising and practical strategy for mitigating anthropogenic CO2 emissions into the atmosphere. During the post-injection phase, where CO2 migration is primarily influenced by buoyant force, local capillary trapping emerges as a crucial mechanism for effective storage. In practical scenarios, saline aquifers may exhibit varying degree of wettability, leading to variation in two-phase flow of CO2 and brine, as well as capillary pressure. However, the previse understanding of how wettability influences the local capillary trapping of CO2 during buoyancy dominated flow in saline aquifer remains unclear. In this study, we firstly construct typical heterogeneous aquifer models using geostatistical modeling. Subsequently, we develop relative permeability curves and capillary pressure curves for CO2-brine in rocks with different wettability characteristics, such as water-wet, intermediate-wet, and CO2-wet. The transport and local capillary trapping of supercritical CO2 in aquifers featuring various wettability are then investigated through high-resolution two-phase flow simulations. The spatial and temporal evolution of CO2 plume is analyzed and the contribution of different trapping mechanisms, namely local capillary trapping, residual trapping, and dissolution trapping, are compared. The advantageous wettability characteristics conducive to local capillary trapping of CO2 in saline aquifers are unveiled. The findings of this study offer valuable insights into the transport and trapping mechanism of supercritical CO2 in deep saline aquifers with different wettability characteristics.

Speaker: Dr Yanyong Wang (Chengdu University of Technology)

16:10 Improving CO2 Sweep Efficiency in Carbonate Rock by Injecting Water-Saturated CO2

We present a comparison between water-saturated CO2 injection and CO2 injection into an Indiana limestone core. Micro computed tomography (micro-CT) imaging (Figure 1) and mercury intrusion capillary pressure (MICP) measurement (Figure 2) technologies were used to determine the pore size distribution. Results suggest that Indiana limestone consists of three pore sizes: large pores > 200 µm, medium pores in range 3-200 µm, and small pores < 3 µm. Pure CO2 or wsCO2 are injected into the core having crude oil and irreducible water at 70 °C and 12 MPa, representing near-miscible conditions.
wsCO2 injection yields 4.9% - 13.6% additional oil recovery (Figure 3d), and 19-36 times greater pressure difference across the core (Figure 3b). Our observations during wsCO2 injection suggest that water might be condensed into oil phase creating an emulsion (Figure 4). Emulsification leads to greater flow resistance therefore, the pressure difference increased. Results also suggest that pure CO2 could only displace crude oil from pores greater than 21 µm, while wsCO2 could entry into an order of magnitude smaller pores due to the 19-36 times higher ultimate pressure difference (Figure 5). The pore space vacated by additional oil recovery is occupied by CO2 yielding a 3% - 9% PV additional CO2 stored compared to pure CO2 injection (Figure 3f).
Keywords: CO2 injection; Water-saturated CO2 injection; Carbonate rock; CO2 storage.

Speakers: Hang Yin (University of New South Wales), Furqan Le-Hussain (School of Mineral and Energy Resources Engineering, UNSW Sydney)

16:10 Integrated Microstructural Analysis of Rock Samples: Quantifying Porosity and Mineralogy with SEM and Machine Learning

Integrating Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDS), and advanced machine learning techniques like the U-Net model offers new tools and approaches for research in the fields of microstructure analysis and mineralogy. This interdisciplinary approach not only increases the precision of data analysis but also expands the scope of research methodologies.
This study details a methodical approach to the microstructural analysis of rock samples, focusing on the precise quantification of porosity and mineral composition. The process begins with the preparation of rock samples using Broad Ion Beam (BIB) polishing, ensuring optimal surface quality for imaging. The prepared samples are then examined using Scanning Electron Microscopy images, revealing detailed microstructural features.
A significant advancement in our methodology is the use of a pre-trained U-Net model for accurate pore segmentation [1]. This machine learning approach efficiently delineates the pore structures within the rock matrix from secondary electron (SE2) images. Subsequently, the study involves analyzing the mineralogical composition of the rock samples. This is achieved through the use of high-resolution backscattered electron (BSE) imaging coupled with low-resolution EDS data. A semi-automatic phase segmentation tool is employed to identify and quantify the different mineral phases present in the rock. This tool incorporates advanced algorithms for pixel-wise image segmentation and labeling, using a decision tree to pinpoint specific minerals [2].
The culmination of this study is the alignment of SE2 and BSE images, enabling the correlation of porosity data with the distinct mineral phases. This innovative technique offers a comprehensive view of how porosity is distributed among various minerals, providing a deeper understanding of the rock's microstructural properties.
This research methodology offers a unique and in-depth perspective on rock microanalysis, with significant implications for geological research and practical applications across various industries.

Speaker: Mr Mingze Jiang (MaP - Microstructure and Pores GmbH)

16:10 Mathematical model and numerical simulation of multi-scale coupled flow in ultra-deep fractured tight sandstone gas reservoirs

The cretaceous gas reservoir in Kelasu Gas Field of the Tarim Basin is a rare ultra-deep fractured tight sandstone gas reservoir. Development practices have shown that the storage and permeability spaces of this type of reservoir exhibit significant multi-scale characteristics. The range of permeability between the matrix and multi-scale fractures and fault media differs by 5 to 6 orders of magnitude. The flow behavior is complex, characterized by the stepwise utilization, coupling superposition of faults, fractures, and pores. Conventional fluid flow theory cannot accurately describe its flow behavior and development mechanism. Therefore, this study first divides the multi-scale media into five flow systems: faults (~kilometer scale), coarse-scale fractures (~hundred meters), meso-scale fractures (~meter scale), fine-scale fractures (~centimeter scale), and matrix pores (~micro-nanometer scale) based on the experimental results of single-fracture flow and the geometric information of multi-scale fractures. Based on fluid mechanics theory and using homogenization theory and volume average method, flow mathematical models are established for each of the five flow systems. The flow in faults and coarse -scale fractures is described by the Navier-Stokes-Brinkman equation, the flow in meso-scale fractures is described by the high-speed non-Darcy equation, and the flow in fine-scale fractures and matrix is described by the modified Darcy equation. The multi-scale coupled flow mathematical model considering non-steady fluid channeling between media is established. The coupled flow model is numerically solved using the finite element method, and numerical well testing analysis is conducted. The research results show that the new model and method reveal the development mechanism of stepwise utilization and coordinated gas supply among different scale media. It explains the significant differences in well productivity and rapid inter-well pressure response observed in the development of this type of reservoir and provides references for the development of similar gas reservoirs.

Speaker: Xianzhe LI (中国石油大学（华东）)

16:10 Microfluidic study on the gas-water flow behaviors at pore-scale in tight sandstone rocks

Gas-water two phases flow behavior is fundamental to understand the underground gas exploitation. Due to the limitations that core-scale displacement experiments cannot reveal the evolution of gas-water interface and distribution of gas and water at pore-scale, a visualization study of gas-water two-phase flow at pore-scale using microfluidics was conducted in this study. Both a single capillary model and pore network model were designed based on CT images of real tight sandstone rocks and related microchip models were fabricated and etched. Then the dynamic evolution of gas-water interface and flow phenomena at pore-scale were investigated using these two micro models. The core-scale flow experiments were also carried out to analyze the gas and water flow mechanisms. The results shows that snap-off and bypass flow were the two most important pore-scale events that occurred during the evolution of gas-water interface to break the continuity of gas flow. Once the gas phase is discontinuous, the Jamin effect became remarkable to hinder the gas flow and water drainage, resulting in gas entrapment and residual water produced. Combined with the core-scale analysis and pore-scale visualization, the damage mechanisms of water blocking in tight sandstone reservoirs is elucidated from the perspective of pore-scale evolution of gas-water interface. These findings will improve the knowledge of gas-water flow mechanisms and reveal the intrinsic mechanism of the water blocking in tight formations.

Speaker: Jian Tian (Chongqing University)

16:10 Microscopic visualization experimental study of salt precipitation during supercritical CO2 injection into saline aquifers

Abstract: CO2 storage in deep saline aquifers is considered an effective means of mitigating climate change induced by increased CO2 levels in the atmosphere. Additionally, CO2 has a significant impact on enhancing gas recovery (CO2-EGR). Therefore, injecting CO2 into water-bearing gas reservoirs is a win-win way for both CO2 storage and utilization. However, CO2 injection into saline aquifers leads to salt precipitation, resulting in decreased permeability. Hence, under conditions of 20MPa and 80℃, this study conducted laboratory-scale microscopic visualization experiments to investigate the growth, distribution， and migration patterns of salt precipitation, and its impact on permeability at the pore scale.
The experimental results indicate: (1) During CO2 injection, salt precipitation grows faster within the mainstream channels while exhibiting slower growth on the sides, primarily distributing along the CO2 mainstream paths. (2) As CO2 is injected, pressure differentials rise at the inlet and outlet, and decrease after CO2 breakthrough. Pressure differentials increase after salt crystallization. Finally, and increases by a factor of 12.6 due to salt precipitation, leading to a reduction in permeability. (3) Salt precipitation in the mainstream area increases the CO2 sweep area and reduces gas channeling. Salt precipitation at the boundary between swept and unswept areas limits the growth of the CO2 sweep area. (4) Salt precipitation mainly occurs in narrow pore throats and at crossed channels. Salt precipitation at narrow throats is formed, due to the limited liquid by capillary pressure is evaporated. At a crossed channel, salt precipitation primarily is formed by the evaporation of liquid film attached to the grain and aggregation of salt particles during movement. (5) Salt precipitation at narrow pore throats occurs mainly on the sides of channels with higher CO2 velocity, while at a crossed channel, it predominantly grows facing the direction of the CO2 flow, being 'cone-shaped' and growing. (6) In enclosed brine, a little salt precipitation is formed as CO2 is injected. Through these experiments, the mechanisms of salt precipitation during CO2 injection are elucidated, and providing a reliable basis for enhancing water-bearing gas recovery and storage.

Speaker: Yongchao Wang (State Key of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University)

16:10 Model formulation of fluid flow in phase domain for fracturing-shut in-flowback-production process in tight oil reservoirs

Multistage hydraulic fracture stimulation is commonly used with horizontal well technology as one of key technologies for the economical and effective development of unconventional reservoirs such as tight oil. The applicable method of numerical simulation will provide effective modeling tools for quantitative studies of tight oil reservoir dynamics and performance, fractures and their effects on oil production, well and stimulation design, and optimal production schedules in the field. The field shows that the flowback rate of fracturing fluid in tight oil reservoir is related to increasing and stabilizing production, and the technology of fracturing, shut in and production has achieved a positive effect on increasing production. However, there are few standardized and effective numerical modeling approaches available for guidance. Based on the summary and analysis of recent research results on the imbibition and flowback of fracturing fluid in tight reservoirs, a novel numerical model of fluid flow for fracturing, shut in, flowback, and production process in tight oil reservoirs is proposed considering the mechanism of spontaneous imbibition, hysteresis effects of capillary pressure and relative permeability, osmotic pressure, stress sensitivity, fluid compression effect in fractures and water-rock interaction. In this model, the multi-scaled fracture system of tight oil reservoirs is described as a set of subdomains and handled by a multi-continuum conceptual model. To model the effect of fluid compression, the pores and fractures of tight reservoir are classified and described according to the different compressibility of tight oil and fracturing fluid. When considering the stress sensitivity of different types of pores and fractures, the effects of fluid distribution difference and fluid compressibility are considered. The model in this paper can describe the fluids flow in pores and fractures in a more detailed and accurate manner, and has certain reference value for understanding the mechanisms of fracturing fluid imbibition and retention, and enhancing tight oil recovery.

Speaker: Dr Zhixue Zheng (Peking University)

16:10 Modeling of CO2-Foam Rheology for Improved Injectivity Prediction in CCUS Processes

Foam is appealing for carbon sequestration due to its remarkable effectiveness in gas-mobility reduction and thus gas sweep improvement (Rossen et al., 2020). Nevertheless, the considerable gas-mobility reduction by foam in the near-well region imposes a concern over foam injectivity. Shear-thinning rheology helps injectivity. Kim et al. (2005) and others show that CO2 foam is strongly shear thinning, with respect to both gas (Ug) and water (Uw) superficial velocities at low foam quality (fg, volumetric gas fraction in foam), as seen from the lower left figure of the graphical abstract. The shear-thinning behavior with respect to Ug has been represented in the widely used foam model, STARS (Computer Modeling Group, 2015). However, no currently applied foam models have yet accounted for the shear-thinning rheology of foam with respect to Uw. Such behavior features upward-tilting pressure-gradient contours with increasing Uw (see the graphical abstract, lower-left figure). Effective modeling of foam rheology is in particular crucial to accurate prediction of foam injectivity. Otherwise, the injectivity would be underestimated, misleading feasibility evaluation of a foam injection process.

Kim et al. (2005) identify a cause for the non-Newtonian foam rheology at wet conditions based on drag force on foam films (Hirasaki and Lawson, 1985): wet conditions create thicker water films along pore walls, leading to a reduction in drag force. In this study, we investigate how to incorporate this effect into the widely used STARS model. Specifically, a simple, semi-empirical equation is developed as a function of water saturation, to relate the effect of drag force to water saturation. The parameters involved in the equation can be easily estimated by fitting to steady-state foam data. The procedure for fitting model parameters is given and illustrated with examples (see fit to data in graphical abstract, left figure, in right figure). We also show how to couple this equation with the STARS foam model. The modified STARS model, incorporating the drag-force mechanism, is tested by fitting to steady-state data for both N2 and CO2 foam. The improved fit to the data verifies the validity of the new algorithm in representing foam rheology at low qualities (wet conditions).

In field applications, foam is usually injected through a surfactant-alternating-gas (SAG) slug mode. The injectivity of the process is primarily dominated by the injectivity of liquid slugs. Gong et al. (2020) using X-ray CT imaging of corefloods reveal that liquid injection forms fingers through in-situ foam and dissolves CO2 nearby, improving its injectivity. In addition to that, the shear-thinning rheology of foam further improves the injectivity. Therefore, considering these mechanisms improves the prediction accuracy of the injectivity of SAG foam processes. Further research is needed regarding the effect of foam rheology on liquid injectivity on the field scale.

Speaker: Dr Jinyu Tang (United Arab Emirates University)

16:10 Modelling liquid-gas interface movement under imbibition conditions considering solubility effects

The geological storage of CO2 involves the interaction of non-equilibrated fluids (connate water and injected fluid) which then equilibrate over time. The CO2 phase diagram and solubility of CO2 in water adds significant complexity to this process. Namely, the existence of concentration gradients surrounding fluid-fluid interfaces may impact on wettability or more general on surface conditions. These pore-scale mechanisms make the prediction of fluid movements a challenging task.
Our research investigates the behaviour of the gas-liquid interface due to the variation in solubility dynamics by numerically simulating the spontaneous capillary imbibition of water into a gas-filled medium. An open-source simulation software featuring the "hybridPorousInterFoam" package is utilized, where the formation of two-phase interfaces is achieved by setting the initial fluid distribution and using the VOF (Volume of Fluid) method to calculate the liquid volume fraction in each cell, thereby accurately tracking the fluid-gas interface positions between as well as calculating the changing fractional fluid composition on either side of the moving interface. Subsequently, the simulation accurately reflects the physical behaviour at these interfaces by incorporating the effects of capillary forces and gravity.
This package allows the input of a distribution of contact angles to set the boundary conditions on the solid surface. Here we introduce additional functionality to model the concentration gradient evolution around the moving interfaces and account for the change in contact angles accordingly.
We demonstrate the capabilities of the new solver packages on a set of basic geometries, investigating the impact of solubility (e.g., due to temperature variations) on the resultant fluid configurations and displacement efficiency.

Speaker: Xingfu Li (UNSW)

16:10 Monitoring nano-scale fluid films in porous rock with AFM

During fluid displacement in porous rock or soils, as they occur in aquifers or other fluid reservoirs such as CO2 or H2 storage sites or hydrocarbon reservoirs, water films form along the internal pore surface of porous rocks due to its wetting properties and capillarity. Near connate water saturation, these water films dominate the macroscopic flow behaviour as observed e.g. in relative permeability experiments.
We use Atomic Force Microscopy (AFM) to study the sub-pore scale configuration of microscale water films on the rough pore surface of Ketton and Estaillades rocks to illustrate the potential of AFM to qualitatively assess the nature of such fluid films at different static and dynamic conditions. Experiments were performed on model systems to test the methodology of AFM fluid film measurements [1]. The static conditions include measurements after drainage, alteration of the surface with crude oil and water flooding. The dynamic conditions include spontaneous imbibition and drying cycles [2]. The experiments were compared to various computational models and macroscopic responses monitored with micro-computed tomography data [2,3].
The results show that the nano-scale water films forming along the internal surface of porous rocks, facilitate corner flow as described by [4] rather than a thin continuous layer of water along the surface frequently assumed [5]. We notice that the water coverage along the pore walls surface shows a variation in continuity and depth depending on the preconditioning of the sample. The results showed that water films can prevail the wetting alteration process. However, only one out of three crudes provided evidence for such water films. The measurements after the water flood further revealed water entrapped by an oil layer as well as regions of different adhesion following a pattern similar to the water distribution observed prior to the wetting alteration. The dynamic scans indicate swelling and shrinkage, which may relate to larger sale pore-scale displacement events in other regions.
The combination of different experimental studies illustrates the capacity of AFM to inform us about the behaviour of nano-scale fluid films during multiphase flow in porous media. Whereas quantitative estimates remain difficult due to the small scanning area, this methodology can provide insights into the mechanisms of fluid film formation, swelling and shrinkage during multiphase flow in porous rock.
[1] G. C. Savulescu, et al., Atomic force microscopy for the characterisation of pinning effects of seawater micro-droplets in n-decane on a calcite surface. J Colloid Interface Sci 592, 397–404 (2021).
[2] G. Wensink, et al., Spontaneous Imbibition and Evaporation in Rocks at the Nanometer Scale. Energy & Fuels 37, 18713–18721 (2023).
[3] M. Rücker, et al., Relationship between wetting and capillary pressure in a crude oil/brine/rock system: From nano-scale to core-scale. J Colloid Interface Sci 562, 159–386 169 (2020).
[4] M. Rücker, et al., From connected pathway flow to ganglion dynamics. Geophys Res 338 Lett (2015).
[5] T. C. G. Kibbey, The configuration of water on rough natural surfaces: Implications for understanding air-water interfacial area, film thickness, and imaging resolution. Water Resour Res 49, 4765–4774 (2013).

Speaker: Maja Ruecker (Eindhoven University of Technology)

16:10 Numerical simulation CO2 sequestration in deep saline aquifers coupled with enhanced reservoir water and geothermal energy system recovery

Deep saline aquifers are ideal geological storage sites for CO2, containing abundant water and geothermal resources. Injecting CO2 into deep saline aquifers while simultaneously extracting reservoir water can slow down the rise in reservoir pressure, increasing the safety of storage. This approach also extracts water resources to offset the cost gap incurred during the storage process. Simultaneously, the heat in the reservoir water (geothermal energy) can be directly used for power generation and heating, further enhancing the resource utilization efficiency of deep saline aquifers. Therefore, a coordinated development approach for deep saline aquifers involving CO2 injection, water extraction, geothermal energy extraction, and carbon storage is proposed. This approach is divided into two phases: the first phase involves extracting formation water and geothermal energy during CO2 injection, and the second phase involves using CO2 as a heat medium to extract geothermal energy after depleting formation water. A numerical simulation model coupling gas-water two-phase heat flow is established to verify the advantages of this new development approach. Additionally, optimal injection methods, well pattern, and injection-production parameters for the new approach are provided.
The research results indicate that simultaneous water and geothermal extraction during CO2 injection can delay the rise in formation pressure, providing more storage space for CO2 and increasing the amount of sequestration. Continuing geothermal extraction after depleting formation water not only retrieves more heat but also further increases geological storage capacity. CO2 injection induces geochemical reactions, increasing porosity and connectivity, creating favorable conditions for sustained CO2 injection, and the extraction of formation water and geothermal energy. Intermittent injection is the optimal injection method to maximize the delay in formation pressure rise. Production wells and injection wells should be located in the same layer, with more injection wells placed in structurally lower positions. Taking the Qing 3rd member of the deep saline aquifer in the Daqing Oilfield, Jilin Province, as an example. The optimal injection parameters are an injection rate of 10,000 m3/d, an injection-production ratio of 0.8, a cyclic injection time of 3 months, and a cyclic injection-production time ratio of 1.
The new development approach provides a novel method and perspective for geological storage of CO2 in deep saline aquifers. Its aim is to establish a theoretical foundation and scientific basis for the efficient utilization of resources in deep saline aquifers. This research is of reference significance for supporting the "Dual Carbon" goals and promoting efficient resource coordination.

Speaker: Zehao Xie (Southwest Petroleum University)

16:10 Numerical simulation for the reactive multiphase flow in porous media during the Carbon Capture and Storage process

In recent years, the extensive using of fossil fuels has led to a substantial release of greenhouse gases, resulting in a pronounced warming trend in the Earth's climate. To mitigate the process of global climate warming, Carbon Capture, Utilization, and Storage (CCUS) projects have gained prominence, with the efficient sequestration of CO2 into geological formations becoming a focal concern. In the process of CO2 sequestration, the permeation behavior of CO2 in water crucially determines its storage capacity and rate. On the one hand, the dissolution of CO2 in water increases the storage capacity. On the other hand, some rocks in the formation, such as glauberite, will dissolve under the combined action of carbon dioxide and water, thereby increasing the storage space of carbon dioxide. To comprehensively investigate the various influencing mechanisms in the CO2 sequestration process, pore-scale simulations offer an effective approach, allowing for a microscopic examination of mechanisms and a systematic analysis of influencing factors to further guide the sequestration of CO2. The lattice Boltzmann method, as a mesoscale approach, efficiently facilitates multiphase and multiscale coupling, enabling the treatment of complex solid-liquid/gas-solid boundary conditions. Thus, in this study, the lattice Boltzmann method was adopted for research purposes.
In this study, a new LB model was built to consider the effect of both CO2 dissolution in water and salt dissolution mechanisms on the CO2 storage process. What’s more, the CST-LB model was adopted to describe the interfacial mass transfer, and the VOP method was used to update the structure of porous media. The impacts of factors such as wettability, salt concentration, and porosity on the CO2 sequestration process were comprehensively explored. The results indicate that, during the displacement and dissolution processes of CO2 in the aqueous phase, an increase in CO2 concentration in water leads to the gradual dissolution of some soluble salts in the solid phase. But there are some risks. While this expands the storage space for CO2, the dissolution of soluble salts results in the phenomenon of breakthrough points between CO2 and water, forming preferential channels that cause a substantial outflow of CO2. Additionally, when the wettability angle of the rock phase is greater, after CO2 displacement, some water remains in the porous medium, reducing the CO2 storage space and consequently diminishing sequestration capacity. This study provides crucial guidance for the sequestration of CO2.

Speaker: Lei Zhang

16:10 Numerical study on the enhanced oil recovery by CO2 injection and CO2 storage in shale oil formations

A larger part of oil in shale formations in Sichuan Basin, China, is volatile oil, which has greater movability compared with other types of oil. However, the production practice showed that the oil production rate declined significantly at the primary production stage (produced by depletion). Therefore, measures of enhanced oil recovery (EOR) should be implemented to acheive effective shale oil production. Carbon dioxide (CO2) huff ‘n’ puff has been widely used to improve the recovery efficiency of shale oil. Meanwhile, CO2 storage can be acheived by injecting CO2 in shale oil formations. In this study, a field-scale numerical model was established based on the real geological conditions and formation properties of the Sichuan Basin, China, and the model was validated by history match of shale oil production data. Molecular diffusion of CO2, confinement of nanopores, adsorption of CO2, and solubility of CO2 in water were considered in the numerical model. Effects of injection rate and time, time span of soaking, number of huff ‘n’ puff cycles on the shale oil production were investigated by sensitivity analysis. Results showed that the molecular diffusion of CO2 and confinement of nanopores helps to increase the efficiency of huff ‘n’ puff of CO2, The adsorption of CO2 on the surface of nanopores and the dissolution of CO2 in water and oil contribute to increase the amount of CO2 storage in shale oil formations. In addition, the earlier injection of CO2 leads to higher oil recovery, and five cycle CO2 huff ‘n’ puff can enhance the oil recovery by 11.67%, with 40% of the injected CO2 stored in shale oil formations .When the time span of CO2 soaking time exceeds 30 days, the increase oil producution is not significant. This work provides an important guidence for the effective EOR of volatile oil by CO2 huff ‘n’ puff in shale oil formations..
Keywords : Shale oil formations, CO2 huff ‘n’ Puff, EOR of volatile oil, CO2 storage, numerical simulations.

Speaker: Rupeng Zhang (China University of Petroleum (East China))

16:10 Physical characteristics analysis of Carboniferous-Jurassic reservoir in the piedmont southwest Tarim Basin

The southwest Tarim Depression is an important exploration area in the Tarim Basin. In recent years, an major breakthrough has been made in the substantial increase of exploration reserves, indicating that this area has great exploration and research potential. Collect the Carboniferous-Jurassic reservoir samples from five profiles in the front of Kunlun Mountain in the southwest of Tarim were, combined with the casting thin sections and scanning electron microscopy to analyze their physical properties. The results show that: The sedimentary environment of the Carboniferous reservoir in the study area is mainly carbonate platform, the Permian reservoir mainly develops delta distributary channel, underwater distributary channel and fluvial sand conglomerate, and the Jurassic reservoir is the sandstone reservoir of delta and lake deposits. On the whole, the average porosity of the sandstone reservoir is about 2.24%, the highest permeability is only 3.34×10-3μm2, and the average is about 1.19×10-3μm2. The porosity and permeability are low, and the reservoir physical properties are poor. The reservoir space is the dissolving pore - intergranular pore - dissolving pore and fissure-pore. The porosity and permeability of carbonate reservoirs are relatively good, with an average porosity of about 1.54% and an average permeability of about 8.93×10-3μm2, but it is still dominated by Class II and Class III reservoirs, and the reservoir space is the assemblage of pore - fracture, and fracture.

Speaker: Boyu Wang (Yangtze University)

16:10 Plugging rules, macro-micro matching relationship and EOR mechanism of elastic particle: A microfluidic study

The transport of elastic particles (EP) in porous media occurs extensively in groundwater filtration, fluidized beds, and oil field development. However, the pore-throat migration rules and the macro- and micro-matching relationship between EP and porous media require further study. In this work, four mechanism models were designed to conduct microfluidic injectivity experiments. By analyzing the pore throat flow behavior of EPs, their migration and plugging rules can be clarified. The microscopic matching characteristics of EPs and pore throats are evaluated based on their entry and retention status in throats of different sizes. Meanwhile, comparing the results of our previous macroscopic matching experiments can achieve the unification of macroscopic and microscopic matching between EPs and pore throats. In addition, microfluidic oil displacement experiments can be carried out based on the reservoir model, and the enhanced oil recovery (EOR) mechanism can be elucidated. The results show that EPs exhibit a "Gather-Energized" transport mode in porous media: as the injection pressure increases, EPs accumulate in the pores, then gradually enter the throat, and finally migrate away from the model outlet. The "Gather-Energized" transport mode and elastic deformation performance of EPs determine that they have the characteristics of pore-throat matching and preferential plugging of large pore-throats. According to the change in the pressure difference between the end time of EP injection and subsequent water injection, it can be determined that the upper limit of the microscopic matching factor is 1.3-1.4, and the optimal matching factor range is 0.8-1.0. The macro and micro matching relationship between EP and pore throats is highly consistent. After water flooding, EP can increase oil recovery by 6.95% compared to polymer flooding. The EOR mechanism mainly includes activating continuous remaining oil, increasing the injection-production pressure difference, and increasing the oil washing efficiency in the swept volume. The experimental results and conclusions of this work support the feasibility of using microfluidic experiments to replace complex core displacement experiments to evaluate the transport and matching characteristics of EPs.

Speaker: Dr Xin Chen (Xi'an Shiyou University)

16:10 Pore network modelling to study dynamic permeability evolution of hydrate-bearing sediments considering media deformation

Permeability is a key parameter determining fluid flow dynamics and production behavior of hydrate-bearing sediments. Figuring out the evolution of dynamic permeability during hydrate phase transition considering media deformation effect is of great significance for the safe and efficient development of hydrate-bearing deposits. In this work, an unstructured pore network with the combination of complex pore-throat morphology and anisotropy is firstly constructed based on the analysis of microscopic pore structures from the marine sediments in the South China Sea. After the validation, grain-coating hydrate is assigned to the pore bodies, connected throats and adjacent pore bodies from large to small elements in the network while considering media deformation effect. Based on the generated hydrate-bearing networks with different hydrate saturation, the dynamic permeability evolution law coupling media deformation effect is calculated. Furthermore, the effect of media deformation on the effective pore structures and dynamic permeability evolution during hydrate phase transition is analyzed in detail. Results show that the absolute permeability grows smaller at the same hydrate saturation due to the compaction of the effective pore body and throat radius caused by media deformation. However, the dynamic permeability decline rate turns slower with the increase of hydrate saturation since hydrate just needs to possess less pore bodies and throats to arrive at the same hydrate saturation when considering media deformation effect. Therefore, the difference of the dynamic permeability with and without considering media deformation becomes smaller at the same hydrate saturation. With an increase in effective stress, a decrease in elastic modulus, and a reduction in Poisson's ratio, the influence of media deformation on the effective pore structures in hydrate-bearing sediments intensifies, resulting in a greater decrease in the effective pore-throat radius and a larger reduction in the dynamic permeability at the same hydrate saturation. In addition, the number of hydrate occupied pore bodies and throats grows much smaller at the same increase degree of hydrate saturation as media deformation effect becomes more pronounced, which results in much slower rate of dynamic permeability reduction and smaller difference of the permeability at different values of parameters relavant to media deformation.

Speaker: Dr Mingqiang Chen (Research Institute of China National Offshore Oil Corporation, Huairou Laboratory)

16:10 Pore Scale Study on Transport Plugging and Displacement Performance Evaluation of a Novel Microencapsulated Polymer Delivery System

The key challenge in polymer flooding for reservoir depth profile control is finding a solution to the contradictory relationship between injectivity and effective displacement. One promising approach is the synthesis of microencapsulated polymers with delayed release characteristics, achieved by encapsulating the polymer within microcapsules. However, the accurate assessment of their targeted viscosity enhancement relies on a thorough understanding of the transport plugging and displacement performance of the microencapsulated polymer within porous media.
We evaluated the underlying properties of the microencapsulated polymer. Based on this, microfluidic technology was used to study the flow behavior of the microencapsulated polymer at the pore scale. We utilized a high-speed camera and two high-precision pressure sensors to capture real-time flow images and pressure variations of microencapsulated polymer in a single-contracted PDMS microchannel. Subsequently, we studied the migration characteristics of microencapsulated polymers through parallel microchannels with multiple-width ratios. Finally, we evaluated the oil displacement performance of microencapsulated polymer under different trigger stages using a complex network glass etching model.
The micro-resistance factor was defined as the ratio of the pressure difference between the microencapsulated polymer inside the microchannel and the pressure difference during water injection only. The experimental results demonstrate that the particle size of the microencapsulated polymer can expand up to 3-5 times, while the solution viscosity can increase by more than 25 times. The microencapsulated polymer particles exhibit particle adsorption, blockage, and free passage within the microchannel. The severity of microchannel damage is more pronounced at lower injection flow rates, and the micro-resistance factor of the microcapsules increases with higher concentration. For particle sizes/throats less than 1, the micro-resistance factor is approximately 1. Blockage and adsorption behaviors of capsule particles gradually increase flow resistance, but blockage has a more drastic impact. The microencapsulated polymer tends to enter wider throats in parallel microchannels, but long-term injection causes more severe damage to smaller throats. In terms of micro-flooding experiments, the flooding effect of un-triggered microencapsulated polymer is similar to that of water flooding. As the triggering degree of the microencapsulated polymer increases, the occurrence of the viscous finger-pointing phenomenon significantly weakens, effectively displacing the remaining oil at the edge of the pore model, and enhancing the oil recovery rate by 22.8%.
This study investigated the flow characteristics and oil displacement performance of microencapsulated polymers at the pore-throat scale. This microscopic analysis provides valuable insights into understanding their deep migration and targeted viscosity enhancement. These findings hold great significance for the advancement and practical application of novel oil displacement agents.

Speaker: Yongsheng Liu (1702010911@s.upc.edu.cn)

16:10 Pore-scale analysis of fluid transport in different grades of brain tumours considering the effect of extracellular matrix

Glioblastoma (GBM), one of the most common aggressive brain tumours, accounts for more than 50% of primary malignant central nervous system (CNS) gliomas in adults. According to the World Health Organization (WHO) classification [1], brain tumours can be graded from 1 to 4 as pilocytic astrocytoma (PA), diffuse astrocytoma (DA), anaplastic astrocytoma (AA) and GBM in terms of malignancy and abnormality. GBM remains challenging to treat with a high 5-year modality rate of more than 90%. This undesirable efficacy can be partially attributed to the higher levels of the extracellular matrix (ECM), thereby leading to disappointing drug delivery outcomes. Hyaluronic acid (HA), one of the major components of ECM, is 8 times and even higher in GBM than the HA level in brain normal tissue, However, how HA affects the ISF transport in the microscale channels is insufficiently understood.
In this study, we first reconstructed the different 3D tumour microstructures from Grade 1 to 4 based on the microscopic morphology of U87 cell lines and their geometrical information (porosity and cell size) [2]. We conducted the simulations using the open-source computational fluid dynamics software OpenFOAM [3]. We confirmed the representative element volume (REV) size (200 μm) and validated simulation results with the reported experimental results [4]. We then quantified the relationship between tissue hydraulic permeability and HA concentration in the low- and high-grade tumours. Specifically, we indicated that the average permeability between PA and DA decreases by 23.5% with an average 21.6% increase of porosity and the same level of HA deposition. While the average porosity increased by 33% from the low-grade to the high-grade tumours, the mean hydraulic permeability decreased by 23.8% with the 2.7 times increase in the HA concentration range. We identified the necrotic region (NR) in GBM as more permeable than high-grade tumours, due to the highest porosity and relatively lower HA concentrations. Therefore, results from our computational models underscore the dominant effect of the HA matrix when simulating the ISF flow in brain tumours. Finally, we established a significant correlation between hydraulic permeability and HA concentration range in different grades of brain tumours, and also found that low- and high-grade tumour tissues are more permeable than brain normal tissues [5].
In this work, we developed a modelling framework to investigate the ISF transport in different WHO Grades of brain tumours. We also linked the ECM permeability to ISF flow through the extracellular space on the pore scale. The findings from this work can advance the accuracy of prediction of fluid transport properties in the brain tumour, and hence also the efficiency of potential drug delivery strategies for brain tumours and other disorders.

Speaker: Mr Yi Yang (University of Aberdeen)

16:10 Pore-Scale Exploration of Wettability Impact on Fluid Flow: Micro-CT Imaging and Relative Permeability Analysis in a Sandstone Core

In recent years, advancements in micro-computed tomography (micro-CT) imaging technology and image processing have significantly enhanced our understanding of the internal structure of rock cores and the distribution of fluids during multiphase flow. Herein, we utilize micro-CT to explore the impact of wettability on fluid flow in a sandstone rock at the pore-scale in combination with relative permeability measurements by history matching steady state flow experiments. Steady state experiments were conducted by the co-injection of decane and water into a sandstone core under different fractional flows (Fw=0, 0.25, 0.5, 0.75, and 1) and wetting conditions. At each stabilized fractional flow, the system was imaged with micro-CT at a resolution of 6.7µm under dynamic flow conditions. The sandstone core as initially tested in a clean state, i.e., water-wet condition, followed by aging in crude oil for two weeks at 90oC to create an aged state core, i.e., oil-wet/mixed-wet condition. For the aged-state core, it was observed that the oil-water interface was dynamically changing under so-called steady state conditions while the clean state core provided static connected pathways for flow. Consequently, the aged-state core was also imaged under static conditions to capture fluid/fluid interfaces and common lines. Based on the scanned images, parameters such as contact angle, curvature, pore occupancy, and Euler number were calculated, comparing differences between the clean state and aged-state conditions. Furthermore, history matching of relative permeability was performed to analyse the flow characteristics at the continuum scale, providing a comprehensive understanding of pore-scale mechanisms linked to relative permeability behaviour.

Speaker: Tingting Wang

16:10 Remobilization mechanism of microscopic residual oil in heterogeneous sandstones during water flooding process

The displacement of residual oil by water flooding in porous media is important in many sandstone reservoirs. Our fundamental understanding of the influence of complex pore geometries of natural sandstones on fluid distribution is still incomplete. To study the formation mechanism and mobilization potential of microscopic discontinuous residual oil, this paper constructs a two-phase flow simulation model in heterogeneous sandstone pores based on the N-S equation and fluid volume method (VOF). The pore structure characteristics are accurately described using the watershed method, and the relationship between residual oil distribution and pore structure parameters was quantitatively characterized. Our findings suggest that pore-scale displacement and snap-off processes have a strong dependence with the coordination number, pore radius and aspect ratio. Moreover, the micro remobilization mechanism of different types of residual oil is analyzed from a hydrodynamics perspective. The results show that the residual oil of network form is the main type during the high-water period influenced by the low coordination number of heterogeneous pore space. Mechanical analysis shows that the mobilization of residual oil is the result of the combination of capillary force and driving force during low-capillary number water flooding process. Pores with good connectivity are the potential breakthrough positions for oil phase. The increasement of driving force would further push the two phase interface to move and form a combined force with the capillary force, and effectively remobilizing oil clusters. The statistical analysis revealed that the development of sub-pathways and the suppression of snap-off are responsible for the decrease of remaining oil saturation under higher capillary number water injections. This study reveals the formation and remobilization mechanism of microscopic residual oil in the high-water cut stages, providing a theoretical basis for fine tapping of the highly disconnected remaining oil in sandstone reservoir.

Speaker: Qi Zhang

16:10 Research on the microscopic movability characteristics of tight oil with different injection media huff and puff based on NMR technology: A case study of Qinghai Oilfield

Huff and Puff is an important means to supplement formation energy in the development of unconventional petroleum resources. In this paper, the physical simulation experiments of different injection media huff and puff are carried out by taking the plunged-sample cores of Qinghai oilfield as experimental samples. By means of nuclear magnetic resonance(NMR) technology, the characteristics of oil movability in pore throats of different sizes are quantitatively studied from a microscopic perspective.The influence of soaking time, permeability and wettability on recovery degree is analyzed.The results show that the oil displacement efficiency increases exponentially with the increase of soaking time.The soaking time of water and fracturing fluid huff and puff should not be too long. On the premise of ensuring economic cost, the soaking time of surfactant huff and puff can be appropriately extended. The soaking time of CO2 huff and puff should take into account the pore structure and permeability characteristics of the reservoir, because gas channelling will occur in the reservoir with fractures if the soaking time is longer. Reservoir wettability is of great importance to the development effect of water and surfactant huff and puff. During water huff and puff, imbibition in small pores is dominant in hydrophilic reservoirs, while large pores are mainly movable in lipophilic reservoirs by displacement pressure difference. The movability of small pores is dominant in the early stage and that of large pores in the latter stage. If the surfactant is well performed on the reservoir, the oil film stripping of large pores is faster and predominates. If the surfactant is poor performed on the reservoir, the imbibition of small pores dominates. CO2 huff and puff mainly moves oil in large pores. In a comprehensive comparison, CO2 has the best huff and puff effect and water has the worst huff and puff effect. The oil displacement efficiency of fracturing fluid and surfactant huff and puff depends on the compatibility of the selected surfactant with the reservoir. This study provides a theoretical basis for the selection of injection medium and soaking time for the development of tight oil reservoirs in Qinghai oilfield.

Speaker: Zhuoying Dou (1. University of Chinese Academy of Sciences, Beijing 100049, China;2. Institute of Porous Flow & Fluid Mechanics, Chinese Academy of Sciences, Langfang 065007, China)

16:10 Stress Sensitivity of Fracture Permeability in Shale Oil Reservoirs under Fluid-Solid Coupling

Introduction
Natural fractures play a crucial role in serving as the primary conduits for seepage in reservoirs, particularly in shale oil reservoirs characterized by ultra-low permeability (Zou et al., 2009; Sun et al., 2023; Bai et al., 2023). Despite the acknowledged significance of these fractures, a notable gap exists in understanding the stress sensitivity of fracture permeability in shale oil reservoirs. Addressing this knowledge deficit, our approach comprehensively investigates natural fracture permeability. This encompasses a combination of mechanical and CT scanning tests, coupled with advanced numerical modeling techniques, to bridge the existing gap and enhance our understanding of fracture permeability in shale oil reservoirs.
Methodology
We conducted multi-scale CT scanning at 25 mm and 100 mm scales, followed by the establishment of a numerical model (Fig. 1a-d). The models were constructed with specific parameters: a density of 2.65 g/cm³, a tensile strength of 8.00 MPa, a compressive strength of 46.67 MPa, a Young's modulus of 1.33 GPa, and a Poisson's ratio of 0.21. The applied confining pressure during the numerical simulation varied from 2 MPa to 10 MPa. This study introduces a fully coupled simulation that accounts for the reciprocal interactions between fluids (CH4) and solids in shale, employing COMSOL Multiphysics.
Results and Discussion
The fracture permeability of the 100 mm core ranged from 2.04×10^4 µm² to 8.67×10^4 µm², while that of the 25 mm core decreased from 1.3×10^3 µm² to 5.45×10^2 µm². Remarkably, the fracture permeability of the 100 mm core was nearly ten times higher than that of the 25 mm core (Fig. 1e). Despite the substantial difference in fracture size between the two models, their permeability exhibited a similar changing trend under varying confining pressures. Additionally, the permeability demonstrated a linear decrease with increasing confining pressure, evidenced by a reduction of 2.35 and 2.39 times the initial values for the 100 mm and 25 mm shale cores, respectively. These findings suggest a consistent stress sensitivity of fracture permeability across different fracture scales. However, it is important to note that fractures with smaller scales may experience complete closure under higher confining pressures, resulting in the total loss of permeability.

Fig. 1. A detailed description of the model creation process based on CT scanning data shale cores. (a) Identifying fractures from scanned sections, (b) segmenting the data based on specific thresholds, (c) reconstructing a 3D model structure, and (d) refining appropriate grids based on the size of the structure. (e) The fracture permeability varies vs. the confining pressures.

Speaker: Dr Saipeng Huang (Chongqing University)

16:10 Study on Injection-Production Characteristics of CO2 Flooding in Fractured Extra/Ultra-low Permeability Reservoirs

Abstract: Clarifying the injection-production characteristics during CO2 flooding in fractured extra/ultra-low permeability oil reservoirs is significant for further improving oil recovery. This study focuses on the fluid and reservoir characteristics of ultra/low-permeability oil reservoirs in the Changqing Oilfield. Under the conditions of formation temperature and pressure in the target block, long core experiments and two-dimensional heterogeneous plate large rock model displacement experiments were carried out to explore the effects of permeability and fractures on the swept efficiency of water flooding and CO2 flooding. The swept characteristics and migration law of CO2 in extra/ultra-low permeability reservoirs with fractures and high permeability zones after water flooding are deeply understood. The research shows that: ①The development of micro-fractures is not conducive to the expansion of the swept volume of CO2 flooding. Compared with homogeneous cores, the recovery rate of CO2 miscible flooding after water flooding in one-dimensional fractured long cores is reduced. ② The injection capacity of CO2 miscible flooding is obviously higher than that of water flooding, and the displacement front is obviously more uniform than that of water flooding, which can effectively displace the remaining oil in the matrix. ③ The development of fractures and high permeability zones will lead to uneven distribution of remaining oil after water flooding, and CO2 breaks through earlier along the dominant channel, which seriously affects the swept volume of CO2 flooding. ④ CO2 large PV miscible flooding can still produce oil continuously at high gas-oil ratio and greatly improve the recovery rate.
Keywords: extra/ultra-low permeability reservoirs; fractures and high permeability zones; CO2 miscible flooding; injection-production characteristics

Speaker: Dr Xinliang Chen (University of Chinese Academy of Sciences)

16:10 Study on Reservoir Time-Varying Patterns and Remaining Oil Distribution in Sandstone Reservoirs during Long-Term Water Flooding Process

The medium-high permeability sandstone reservoir has the advantages of high permeability and porosity, low cementation degree, and strong oil and gas migration ability. The reservoir rocks are mainly composed of clay minerals and fine silty particles. In the long-term water flooding development process, the scouring effect of water will cause clay minerals to fall off and migrate, and the reservoir structure and properties will change, thus altering the oil displacement mechanism.
To improve the understanding of the change in rock physical properties and the capture and migration mechanism of internal multiphase flow during long-term water flooding, experiments on sandstone cores with different permeability and porosity were carried out. Based on CT scanning technology, the pore network model is constructed to study the change in rock pore throat structure during high-speed and long-term water flooding. Combined with X-ray diffraction, SEM images, and core flow experiments, the evolution mechanism of reservoir physical properties is discussed. On this basis, the occurrence types, distribution characteristics, and formation mechanism of microscopic remaining oil are studied, and the distribution characteristics of remaining oil in long-term water flooding and short-term water flooding are compared.
The results indicate that the heterogeneity of the core pore structure affects the location and morphology of residual oil, resulting in different dominant types of residual oil within sandstone cores with varying permeability. In addition, the improvement of pore throat structure and the transformation of wettability are inherent reasons for long-term water flooding to improve oil recovery efficiency.

Speaker: Mr Tonghui Liu (China University of Petroleum (East China))

16:10 Study on the Emulsification Characteristics of Heavy Oil during Chemical Flooding

Chemical flooding is a very important method to the efficient development of heavy oil reservoir. A clear understanding of the relationship between emulsification characteristics of heavy oil during chemical flooding and test methods that current used to evaluate the properties of chemical flooding agent can be useful for oilfields development of the heavy oil. In this study, the oil-water interfacial tension (IFT) and oil in water (O/W) emulsion properties (emulsification state, droplet size, viscoelasticity and stability) formed by six chemical flooding agents at different concentration are tested. Then, combined with the heavy oil flooding dynamics, the emulsification characteristics of heavy oil during the chemical flooding process of are studied and the influence mechanisms of O/W emulsion on oil recovery are clarified. Finally, the emulsification effect of heavy oil on injection profile turnover is studied by parallel sand-packed tube experiments. Studies show that all six chemical flooding agents can greatly reduce the IFT of heavy oil-water (more than 90%). However, the stronger the emulsification ability, the smaller the droplet size, the better the viscoelasticity and the stronger the stability of O/W emulsion, the better heavy oil recovery of the chemical flooding agent. This is mainly because the most effective action stage is the time it takes from the chemical flooding agent injected to the O/W emulsion front reach the production outlet. During this period, the amount of emulsified heavy oil, the width of emulsification zone and the properties of formed O/W emulsion all affect the heavy oil flooding efficiency. Therefore, when screening chemical flooding agents, the emulsification speed, the droplet size and the viscoelasticity of formed O/W emulsion are the primary evaluation factors. In addition, through the parallel sand-packed tube experiment, it is found that the stronger the emulsification ability of chemical flooding agent, the better the performance of formed O/W emulsion, the stronger the profile turn over ability. For reservoirs that water flow channel has formed, using profile control agents to effectively block dominant flow channels can improve the emulsification ability of chemical flooding agents, thus achieving the purpose of improving the swept area. The research results can provide guidance for the screening of chemical flooding agent with emulsify character and construction process optimizing in heavy oil reservoirs development.

Speaker: Jianbin Liu (Xi'an Shiyou University)

16:10 Study on the mechanism of fracturing fluid flowback in microporous fractures based on nuclear magnetic resonance

The study of fracturing fluid flowback mechanism is an effective means to evaluate fracturing operation methods and guide on-site production, given the background of multiple challenges in fracturing technology and permeability recovery. However, the Marine and continental transitional shale reservoir in Ordos Basin possesses unique geological characteristics, resulting in a significant amount of retained fracturing fluids that cause severe damage to the reservoir. Previous studies focused on evaluating flowback based on permeability recovery rate without considering water phase utilization in micro-porous fractures, leaving the flowback mechanism of fracturing fluid in such fractures unclear. Therefore, this research conducts a fracture fluid flowback experiment using nuclear magnetic resonance to characterize the distribution characteristics of retained water within multi-scale pore structures during the flowback process by utilizing key parameters like flowback pressure difference and time. The objective is to investigate the degree of fracturing fluid utilization across various scales of pores and provide guidance for rational optimization of on-site drainage and production systems.Results and discussions: (1) Compared with Marine shale, Marine and continental transitional shale exhibits better pore connectivity which facilitates efficient flowback within smaller pores.
(2) During the process of fracturing fluid flowback, it is recommended that the pressure difference should exceed 0.04 MPa/cm for optimal utilization within D<50nm pores; however, high pressure differences can lead to rock particle migration causing channel blockage.(3) As retention time increases for fracturing fluids, their proportion within 2-5nm pore diameters gradually decreases.

Speaker: Mingjun Chen (西南石油大学)

16:10 Studying rock decompression failure phenomenon on the pseudo-3D hydro-mechanical numerical model of core sample with dynamic microcracks

One of the poorly studied phenomena is decompression failure of pore material, when the combination of an instantaneous decrease in stress in the rock matrix and high pressure in the pores leads to the stress exceeding critical values. This phenomenon most often occurs in ultra-low permeability rocks such as shale or coal. Shale core samples from productive intervals are completely destroyed during core recovery to the surface.A similar process occurs in coal mines when rapid decompression leads to the growth of a network of cracks, which causes a catastrophic leak of methane.
The author developed a unique computational tool by implementing a numerical method of hydromechanical coupling with dynamic cracks. As the cracks propagate, they interact with each other, even merging under certain conditions. Fractures coalescence drastically increase mass coverage, which exponentially increases the outflow of fluids. Numerical modeling shows that rock material during decompression in most cases undergoes shear failure, instead of tensile failure, which is typical for hydraulic fractures. Highly efficient parallelization on GPU using CUDA allows you to simulate direct accounting of fractures using the “continuous destruction” method. This makes it possible to consider fractured rocks in a single computational domain with fluid flow both in fractures and in porous media. Non-zero crack stiffness takes into account stress transfer through crack surfaces.
Numerical modeling revealed the critical role of the mechanism of decompression failure of rocks, which had not been previously studied. Only the highly efficient parallel GM coupling algorithm allows the investigation of such a problem due to the ultra-high resolution (~1 µm) of the core sample.

Speaker: Salavat Ishbulatov (Stanford University)

16:10 Sub-core scale investigation of heterogeneity effect on CO2 transport in natural conglomerate cores

To assess the impact of complex heterogeneities in conglomerate on pore distribution and fluid flow, the effect of heterogeneous debris spatial distribution in conglomerate on CO2 migration under reservoir conditions was studied using X-ray Computed Tomography (X-CT). Four types of conglomerate cores were drilled from the CO2 storage site in the Fushan Depression, China, which include uniformly distributed clasts sandstone, layered clasts, mud-bearing interlayered sandstone, and sandstone. These four conglomerate cores, characterized by different distributions of matrix and clasts, represent highly heterogeneous features. We conducted two-stage sub-core scale flow experiments. Drainage and imbibition tests were carried out under reservoir conditions, with a focus on the impact of heterogeneity on CO2 distribution. We used CT to quantify the detailed process of residual and dissolution capture in heterogeneous rocks caused by clasts presence, which can be widely applied in areas such as CO2 sequestration and enhanced hydrocarbon reservoir exploitation.

Speaker: Xueqing Zhou (Institute of Deep-sea Science and engineering, CAS)

16:10 Testing a Thermal-Dispersion Upscaling Method for Geothermal Reservoir Simulation in Heterogeneous Reservoirs

The lifetime of a geothermal doublet depends on the time it takes reinjected cold water to reach the hot production well. The spreading of the thermal front as it advances through the reservoir is therefore key to the lifetime of the project. Simulation of thermal dispersion in a heterogeneous reservoir is challenging. Refinement of the grid to incorporate all scales of heterogeneity is impractical. Conventional models take the arithmetic average of properties within an upscaled grid block. This causes underestimation of thermal dispersion in the flow direction.
We have developed an upscaling method that accounts for the increased “Taylor” dispersion that results from nonuniform velocities, reflecting permeability variation, within a grid block (Tang, 2022). With this method, for instance, we upscale a geothermal reservoir description with 91 layers, representing permeability values from a well log, to 12 layers (figures a and b in graphical abstract), with corrected thermal dispersion coefficients (figures c and d). The upscaled simulation model has increased thermal dispersivity in the flow direction.
In this study we examine the combined effects of improved upscaling and numerical dispersion (van Nieuwkerk, 2022) using the DARTS simulator (Khait, 2019). We use a 2D rectangular “layer-cake” model of 91 layers reflecting the permeability distribution at the well, with parallel flow to eliminate numerical dispersion from diagonal flow between grid blocks. We compare results of upscaled models to the original 91-layer description with sufficient grid resolution in the flow direction to minimize numerical dispersion overall. We examine the advance of cold water from one well to the other and, in particular, the arrival of the cold-temperature front at the production well. For simplicity, in this study we exclude heat transfer with over- and unburden to focus on dispersion within the reservoir.
With sufficient grid resolution in the flow direction, the corrected upscaling method gives a better fit to the 91-layer fine-grid model than simple arithmetic averaging within grid blocks. Upscaling in multiple stages using the new method appears to further increase thermal dispersivity by a modest amount. Arithmetic upscaling underestimates thermal dispersion.
However, coarser grid refinement (50 grid blocks between wells) increases the spread of the thermal front for both upscaling methods. As a result, combined with numerical dispersion, the arithmetic upscaling method gave a better fit in that case than the corrected upscaling. With 25 grid blocks between wells, numerical dispersion greatly distorts the results of both upscaling methods, spreading the thermal front much more than in the fine-grid 91-layer simulation.
These results show the complexity of predicting the breakthrough time of the cold-water front in a geothermal doublet. Current simulators do not account for increased dispersion arising from heterogeneity within grid blocks, but numerical dispersion greatly distorts results. Higher-order numerical methods designed to correct for numerical dispersion may help. Furthermore, if the simulator assigns the thermal conductivity automatically based on average fluid and formation properties within a grid block, it may be difficult to adjust the thermal dispersivity for Taylor dispersion.

Speaker: William Rossen (Delft University of Technology)

16:10 The role of biopolymer on the stability of Colloidal Gas Aphrons

Numerous studies [1] have been conducted on using surfactant solutions for soil remediation, but their implementation has been limited by the high cost and consumption [2] of surfactant solutions. Moreover, CGA fluids have been shown to be more effective than surfactant solutions in terms of contaminants eliminated per gram of surfactant [3]. An innovative approach to address these challenges is the use of colloidal gas aphrons (CGA) fluid, which aims to reduce the cost of the operation compared to traditional surfactant-based soil remediation. The first investigation into the stability of CGA fluid for soil remediation was done in 1994, where volume fraction and bubble size distribution of microbubbles in sample solutions were measured over time [4].
CGAs were first introduced by Sebba in the 1970s [5] as a new form of dispersion characterized by gas bubbles dispersed in a continuous liquid phase. Colloidal gas aphrons are stabilized by a viscous water layer and surfactant shells, creating a microbubble system [6]. However, CGA-based fluids must remain stable to prevent the destruction of bubbles when injecting them into porous media for soil remediation purposes. This ensures their effectiveness and benefits [7]. The size of the bubbles, which is determined by the surfactant, is one of the most critical factors influencing CGA stability. Although previous studies have examined the use of CGA for oil industry applications such as drilling fluid or injection into depleted reservoirs, its application for soil remediation studies is not yet clear [8]. Furthermore, the impact of additional stabilizers and thickeners, such as polymers, has not been thoroughly investigated. Therefore, it is crucial to investigate how quantitative parameters like surfactant and polymer concentrations at high levels affect the stability of CGA.
The primary objective of this research study is to investigate the impact of a particular biopolymer and anionic surfactant at high concentrations on the stability of CGA using image analysis based on microscope images at varying concentrations.
The stability of CGA dispersion was analyzed by quantifying the bubble diameters using microscopic observation. Zeiss CCD camera was placed on a microscope slide to capture images of CGA fluid samples. Our study incorporated varying concentrations of xanthan gum polymer (ranging from 1000 to 10,000 ppm) and sodium dodecyl sulfate surfactant (ranging from 1 to 10 CMC). Subsequently, ImageJ software was used to analyze the images and determine the bubble size distribution (BSD) over time. Our evaluation involved determining the BSD at intervals of 0 to 10 minutes over 60 minutes.
The effects of SDS surfactant concentrations and XG polymer concentrations on BSD CGA were investigated experimentally using optical microscopy. The findings demonstrated that while the BSD of CGAs decreased at first with increasing XG polymer concentration, it eventually increased slowly. On the other hand, the diameter of CGAs increased with the concentration of SDS surfactant. Furthermore, the greater viscosity of the base fluid due to higher polymer content led to reduced air penetration and smaller bubbles, resulting in slow gas diffusion and a lower gas fraction.

Speaker: Sagyn Omirbekov (National Laboratory Astana - Nazarbayev University)

16:10 Visualized investigation of transport behaviors during CO2-EOR in multiscale porous medium

Although CO2 injection into the geological formations is a promising option to enhance oil recovery, how multiscale pore structures within porous media affects multiphase transport remains poorly understood. This study fully exploits the unique advantages of real-time in-situ visualization of microfluidics to investigate the multiphase flow behavior within micro and nano-pores during both CO2 miscible and immiscible flooding process. Two types of porous media chips with network channel structures were designed– a micro-nano scale cross-scale chip with a fracture-matrix structure and a micro-scale chip with multiple pore-throat ratios. This study investigates the impact of cross-scale effects, Jamin effect, and network channel shapes on the flow patterns of CO2 and oil during the CO2 flooding process. The effects of these factors on the recovery rates throughout the entire CO2 flooding process are also discussed. In the cross-scale chip, micro-scale fracture channels expedite the process of achieving a 100% recovery rate in CO2 miscible flooding. Conversely, the micro-scale fracture channel, offering a "short circuit" pathway for CO2, results in the extensive entrapment of residual oil, leading to a substantial reduction in the recovery rate in CO2 immiscible flooding. In the micro-scale chip, the flow resistance induced by the Jamin effect increases with the increase of the pore-throat ratio porous media during CO2 immiscible flooding. The time required to achieve 100% recovery efficiency during CO2 miscible flooding is notably delayed with an increase in the pore-throat ratio. These results can significantly enhance our understanding of multiphase transport in CO2 enhanced oil recovery, facilitating the optimization of practical CO2-EOR schemes.

Speaker: Jiawei Shi (China university of petroleum (East China))

16:10 Wettability-alteration and Its Impact on Immiscible Two-phase Relative Permeability Induced by Nanoparticles Non-uniform Adsorption in Heterogeneous Porous Media

Nanofluid injection has been reported as a promising technique to enhance oil recovery in tight reservoirs. However, research pertaining to nanoparticles (NPs) is primarily confined to laboratory experiments, thus the microscopic enhanced oil recovery mechanism behind nanofluid injection remains unclear. Therefore, it is imperative to establish a micro-scale research and analysis methodology for the nanofluid injection on macroscopic reservoir. This methodology aims to address strategically significant oilfield concerns, including: 1) NP non-uniform adsorption: The manner in which internal mineral composition, roughness, and distribution within porous media influence the non-uniform adsorption of nanoparticles, and how this non-uniform adsorption affects the microscale wettability of porous media. 2) Relative permeability: The heterogeneity in microscale wettability induced by nanoparticles and its impact on immiscible two-phase relative permeability of porous media.
In answering the question above, a novel, hybrid pore-scale simulation method using Lattice-Boltzmann (LB) coupled with Langevin-Dynamics (LD) is proposed to depict the motion behavior of NPs during immiscible two-phase displacement. In a fashion of discrete LB forcing source distribution, the LD method is introduced to characterize the effects of Brownian motion, thermal fluctuation-dissipation, and particle-particle interactions. An Eulerian-host algorithm is adopted to ensure the computational efficiency. Based on physical experimental data, NP surface properties are mathematically characterized. This coupling enables the dynamic and precise depiction of localized wettability alters within the pore-throats of reservoir. Combining with the application of statistical analysis theory, conditions governing the formation of oil-phase preferential pathways are examined, and oil/water permeabilities in tight reservoirs are calculated.
The hybrid LB-LD approach embedded experimental data and statistical analysis theory achieves the efficient-yet-rigorous characterization of SiO2 NPs wettability alteration behaviors from representative pore-throat structures of tight oil sandstones. The results indicate: 1) Nanofluids induce a state of strong dynamic wettability heterogeneity in reservoirs by locally altering wettability. It exhibits a linear relationship with NP concentration and water-swept-area. 2) The probability density distribution of wettability in porous media exhibits a bimodal normal distribution trend. As the injection of nanofluid increases (with Sw increasing from 0.2 to 0.9), the proportion of strongly water-wet surfaces (water-wetting angle of 165°) rises from 23% to 66%, while the proportion of strongly oil-wet surfaces (water-wetting angle of 30°) decreases from 59% to 27%. 3) Quantitatively characterize the mathematical relationship between the heterogeneity in microscale wettability distribution and macroscopic permeability in porous media. Propose a probability density equation for the distribution of microscale wettability in porous media following exposure to nanofluid.
Using the method above, the microscopic mechanisms of NPs in altering wettability is examined in detail. A quantitative relationship between nanofluid injection and strong wettability heterogeneity is established, along with a clear connection between wettability heterogeneity and the reservoir permeability. The results provide important guidance not only for the prediction of micro-wettability of porous media, but also for the optimization of injection condition so that optimum oil recovery can be achieved.

Speaker: Can Ke

Thursday, 16 May

09:05 → 10:20 MS01: 4.1

09:05 Pore-scale simulation of H2-brine system relevant for underground hydrogen storage: A lattice Boltzmann Investigation

Underground hydrogen (H2) storage in saline aquifers is a viable solution for large-scale H2 storage. Due to its remarkably low viscosity and density, the flow of H2 within saline aquifers exhibits strong instability. Therefore, it is crucial to understand the flow processes of H2 and brine at the pore-scale, which can be translated into constitutive relations at continuum-scale to guide field-operations. For the first time, we develop a lattice Boltzmann model tailored for pore-scale simulations of the H2-brine system under typical subsurface storage conditions. The model captures the significant contrast of fluid properties between H2 and brine, and it offers the flexibility to adjust the contact angle to suit varying wetting conditions. The developed model is employed to investigate the pore-scale dynamics of two-phase flow composed of H2 and brine. We show that the snap-off is enhanced in a system with a higher capillary number and a smaller contact angle. These conditions lead to a reduced connectivity of the gas phase, which is unfavorable for H2 production from the aquifer. Moreover, the relative permeability curves, computed from the simulation results, exhibit distinct behaviors for H2 and brine. In the case of the wetting phase, the relative permeability can be quantified solely using the phase saturation, whereas for the non-wetting phase, the phase saturation and Euler number appear to contribute equally to the relative permeability. This implies that different formula, compared to the typically used saturation-based functions, should be considered for continuum-scale simulations.

Speaker: Dr Yuhang Wang (China University of Geosciences (Wuhan))

09:20 Methods for Hydrogen Storage Characterization in Porous Substrates

Hydrogen energy has been a subject of increasing interest over the past decade. The use of hydrogen for energy storage allows for a clean energy carrier that produces only water and heat after oxidation. Focus has been hydrogen storage, which demands abundant and safe storage volumes. Similar to the carbon dioxide storage campaign, subsurface formations offer large pore volumes for gas storage, but characterizing porous substrates for this purpose is still in development. Depleted oil reservoirs, salt dome caverns, and aquifers are prime subsurface candidates for this purpose. There are associated issues with the injection of large volumes of the gas into these formations such as unfavorable chemical reactions, leakage through the cap rock, and large capital expenses associated with suitable surface injection equipment. This research aims at testing our ability to estimate adsorption capacity in synthetic or natural porous systems. To this end, materials were first characterized via low-pressure adsorption isotherm analysis. Secondly, low-pressure nitrogen adsorption results were compared to nitrogen and hydrogen high-pressure adsorption isotherms to determine if surface area analysis suffices to estimate storage potential for hydrogen. Additionally, nuclear magnetic resonance (NMR), first in its non-spectroscopic mode, namely Time Domain NMR (TD-NMR), and subsequently in its spectroscopic mode, using a high-field NMR spectrometer, was used to analyze hydrogen adsorbed in porous media. In this sense, we developed TD-NMR protocols that enabled capturing data at relatively high pressure (up to 3000 psi) using a custom-designed NMR tube in which the gas pressured was controlled with a pump. A similar setup was used on a Bruker Biospin NMR spectrometer. Results show that low-pressure nitrogen adsorption isotherms provide insufficient guidance to understand the hydrogen adsorption response at high pressure, which likely reflect the fact that surface area is at best an incomplete characterization method for this purpose. TD-NMR transverse relaxation time (T2) distribution shows some sensitivity to hydrogen adsorption in porous media at high pressure, which indicates the potential of this technique to characterize hydrogen storage. High-field NMR, while being a more complex method, sheds light on hydrogen behavior in porous media that complements the other two sources of information.

Speaker: Vladimir Alvarado (University of Wyoming)

09:35 Pore-Scale Modeling of Hydrogen and Cushion Gas Relative Permeability to Brine in geological hydrogen storage

Hydrogen is poised to become one of the most promising alternative clean sources of. energy for climate mitigation. The development of a sustainable hydrogen economy depends on the global implementation of safe and economically feasible inter-seasonal hydrogen storage and recovery. However, the current body of literature lacks a comprehensive numerical characterization of the multiphase flow of hydrogen-brine and hydrogen-cushion gas in porous media. It is crucial to study the essential parameters that impact hydrogen storage and withdrawal at the pore scale.

This study introduces a pore network model designed to replicate the underlying mechanisms of hydrogen interaction with in-situ fluids, such as brine and cushion gases. Initially, the developed pore network model is validated against laboratory measurements of hydrogen-brine drainage and imbibition curves using the precise fluid properties and the measured petrophysical properties of the core sample. Additionally, a comprehensive sensitivity analysis was conducted to quantify the effects of fluid and rock properties on the relative permeabilities of the hydrogen phase.

The model was adapted to replicate the results of drainage and imbibition observed in the laboratory experiment of hydrogen-brine drainage and imbibition curves. Furthermore, a sensitivity analysis of the model was conducted under various conditions, including injection pressure, initial reservoir pressure, reservoir temperature, salinity of brine, and the presence of cushion gas. The results indicate that capillary pressure and the relative permeability of the hydrogen-brine system are sensitive to surface wettability. Moreover, the relative permeability endpoint (residual saturation) is significantly influenced by pore distribution and pore connectivity. A higher ratio of smaller pores correlates with a higher residual saturation of hydrogen. Conversely, the presence of a third phase (cushion gas) reduces the residual saturation of the non-wetting phase (hydrogen). Additional analysis of different cushion gases revealed that CH4 performs better as a cushion gas compared to CO2 and N2 under the simulated conditions.

This research offers a comprehensive pore-scale prediction of the relative permeability of hydrogen and brine systems, both with and without cushion gases. The analysis provides crucial quantifications of the effects of various parameters on hydrogen production. These findings contribute to the improved selection of optimal storage sites and operational parameters for the geological storage of hydrogen and its production.

Speaker: Alexey Cheremisin (Skolkovo Institute of Science and Technology; LABADVANCE)

09:50 H2 flow and displacement in sandstone rocks: evaluating experimental results against pore-network model

Understanding the pore-scale displacement and trapping mechanisms for hydrogen-brine systems in porous rocks is pivotal as efforts increase to develop subsurface hydrogen storage facilities. Pore-scale flow visualization experiments serve as an important tool to comprehend the pore-scale mechanisms during hydrogen (H2) injection and withdrawal. However, conducting such experiments, particularly under subsurface conditions, are intricate and resource intensive. Quasi-static pore-network models (PNMs) offer a faster alternative to understand multiphase flow in porous media. These simplified models represent pore spaces as networks comprising pores and throats with idealized geometries, simulating fluid invasion based on the quasi-static 'invasion' capillary pressure required for fluid entry. PNMs have been extensively used to simulate multiphase fluid flow behaviour for oil-water systems in porous media, however their utilization for H2-water systems remains limited. In this work, we use a widely used PNM [1] to simulate H2-water flow on two distinct networks, one from a homogeneous rock sample and another from a heterogeneous layered rock sample. We then compare these simulated results with recently conducted pore-scale 3D visualization experiments on both rocks [2], [3]. Comparative analysis indicates a good agreement between PNM simulations and experimental results for drainage and imbibition in the homogeneous case, and reasonable agreement in the heterogeneous case during drainage. However, it is apparent that while PNMs offer a simplified and computationally efficient means to simulate hydrogen flow and displacement in porous media, they cannot presently supplant experimental observations, particularly for complex rocks. This study emphasizes the necessity for further validation of these models against experimental findings to expand their usage and refine simulation predictions.

Speaker: Zaid Jangda (Heriot-Watt University)

10:05 Production dynamic prediction and injection production efficiency optimization simulation of depleted gas storage reservoirs

In the construction and operation of depleted gas reservoirs underground gas storage, the block pressure, effective storage capacity, injection and production capacity, and operating cycle are key issues that reflect the storage efficiency of gas storage facilities. This article is based on the geological and structural characteristics, geometric characteristics, and physical properties of a sandstone reservoir in a gas storage facility in Liaohe Oilfield. Combining logging data and production performance data, a joint back analysis method for storage performance parameters is proposed to establish a three-dimensional fine geological model that can comprehensively reflect the construction and operation characteristics of the gas storage. By fitting the production dynamic history, the block pressure and single well pressure variation characteristics were simulated, and the model can effectively invert the changes in block pressure and single well pressure of the reservoir during 30 years of oil and gas production and 9 years of operation as a gas storage facility. On this basis, the model was used to predict the production dynamic operation of the gas storage, simulate the effects of injection and production rate, well network deployment, and injection and production cycle on the block operating pressure and oil-gas-water interface migration characteristics, and the upper limit of the effective storage capacity of the gas storage was predicted. This research achievement has guiding significance for exploring the operating rules of gas storage, analyzing storage capacity parameters and operational dynamics, and formulating reasonable working systems for injection and production wells.

Speaker: Mr Hao Feng (Northeastern University)

09:05 → 10:20 MS03: 4.1

09:05 Experimental Study of Liquid Cohesion Impact on Particle Clogging in Rock Fractures

Suspended particle migration and clogging processes in rock fractures are ubiquitous in nature and industrial activities like hydraulic fracturing and hole-drilling fluid leakage resistance. As a common type of particle cohesion, the impact of liquid cohesion on clogging in rock fractures and its mechanism remain unclear. We conduct visualized experiments and discover that even if a small amount of immiscible liquid phase is added into the particle suspension, the clogging in fractures is significantly enhanced. By varying the flowrate and secondary liquid content, four patterns of particle clogging behaviors are found. The reason for clogging enhancement is further explained by the particle agglomeration induced by capillary cohesion. To quantify the effect of capillary cohesion, we propose a theoretical model of agglomerate size distribution as a function of various secondary liquid content and a criterion for particle agglomerate clogging in rock fracture. These findings have potential applications in numerous field applications involving particle migration and clogging, including oil/gas exploitation, drilling fluid leakage resistance, and drilling cuttings underground disposal, etc.

Speaker: Mr Renjun Zhang (Wuhan University)

09:20 Dynamics of two-phase flow in coal using X-ray micro-computed tomography imaging and positron emission tomography

The fluid dynamics of gas-brine flow within porous media play a crucial role in the recovery of hydrocarbon gas and the sequestration of CO2. Coal seams are targeted as a reservoir rock because of their strong adsorption properties. However, permeability is an issue as they consist of matrix and fracture components, present a complex flow channel system for competing fluids and gases. During production, the initial dewatering process reduces pressure and induces CH4 desorption from the matrix into fractures, accompanying brine flow towards production wells. CO2 injection further displaces CH4 and stores CO2 in the matrix due to competitive adsorption with CH4. Moreover, Coal seams are dynamic during gas depletion and successive injection as the matrix shrinks and then swells, altering the structure of the flow channels. This introduces additional complexity to the transportation behaviour of the fluids. This study introduces an innovative approach to investigate the dynamics of gas-water two-phase flow within fractured coal cores. The methodology involves an integration of unsteady-state two-phase fluid flow experiments, dynamic positron emission tomography (PET) imaging, and high-resolution X-ray micro-computed tomography (micro-CT) imaging. Under reservoir pressure conditions, micro-CT imaging is employed to capture the fracture structure of the coal sample. A gas-injection-based unsteady-state flooding test is subsequently conducted on a water-saturated sample at the same pressures, with PET scanning used for dynamic imaging of the displacement process. This flooding experiment is designed to emulate gas-water transport behaviour in a coal seam during production, facilitating real-time data collection of gas injection volume, inlet-outlet differential pressure variations, and water production. The obtained data is utilized to predict the relative permeability curves of the sample. Following the flooding experiment, a multi-scale image analysis is performed by aligning low-resolution PET images at different time steps with the high-resolution micro-CT image. it superimposes the flow path onto the fracture structure of the sample, allowing for the determination of water saturation and characterization of flow behaviour. This analysis leverages the unique advantages of PET's dynamic imaging capabilities and micro-CT's high image resolution to enhance the visualization of fluid transportation behaviour within the media. Overall, this approach offers significant potential for sensitivity analysis on relative permeability of a porous media, including not only coal, but also reservoir rocks like sandstone and shale. It can consider factors such as stress, temperature, and wettability, enabling a quantitative comparison of relative permeability and offering visual insights into fluid flow behaviour as conditions change. This contributes to precise predictions of relative permeability, aiding in the identification of optimal scenarios for both hydrocarbon exploitation and carbon sequestration.

Speaker: Wen Xi (UNSW)

09:35 Effect of non-acid-soluble minerals on acid-etched hydraulic fracture morphology and conductivity for acid-fracturing in carbonate rock

Acid fracturing is a primary stimulation technique for carbonate reservoirs. Acid selectively etches hydraulic fractures, forming high-conductivity channels capable of transporting oil and gas under the influence of normal closure pressures. Numerous fracture acidization models have focused on factors such as reservoir temperature, acid fluid type, and distribution of carbonate minerals, but few have explored the impact of non-acid-soluble minerals, such as talc and quartz, on the fluid-flow and reaction mass-transfer mechanisms within hydraulic fractures in carbonate reservoirs.
This study developed a hydraulic fracture acidization model that considers the influence of non-acid-soluble minerals, and the model was validated through laboratory-scale API rock plate acidization experiments. Furthermore, the study extensively discussed and analyzed the effects of non-acid-soluble minerals on acid etching of fractures.
The results demonstrate that the model effectively captures the acid etching characteristics of hydraulic fracture walls containing non-acid-soluble minerals. Non-reactive minerals on the hydraulic fracture walls influence the flow paths of the acid and the diffusion rate of hydrogen ion, leading to non-uniform dissolution on the fracture surfaces and the formation of rough fracture faces. Non-acid-soluble minerals retards the rate of acid-rock reaction, and as their content increases, the extent of surface dissolution on the fractures gradually diminishes, resulting in a reduction in non-uniform etching. However, non-acid-soluble minerals can act as a support for the fractures after closure, to some extent enhancing both fracture conductivity and its sustaining capacity.
This study reveals the impact of non-acid-soluble minerals on the acid etching morphology and conductivity of hydraulic fracture, providing valuable insights for the design of acidizing process design in carbonate reservoir.

Speaker: Mr Zihao Liu (西南石油大学)

09:50 Dynamics of fluid flow in natural fracture networks

In complex fracture networks, dynamic fluid-flow patterns arise already at flow velocities in the centimetre-per-second (cm/s) range. Yet, these phenomena get ignored or underestimated when such flows are modelled using Stokes’ equation or steady-state approximations of the Navier Stokes equation (NSE) are used.
Here we apply the Detached-Eddy Simulation technique to solve the NSE in rock fractures, carrying out an investigation of the flow dynamics and flow micro-transitions in particular. Following verification and validation of this approximative model with data collected from physical flow experiments involving single Y- and X-shaped channel intersections, we have performed transient simulations on discrete fracture models constructed of tens-of-metre sized natural patterns with millimeter-wide open fractures. Our new results obtained on highly refined two-dimensional fracture meshes with tens of cells spanning the width of each fracture reveal that fracture flow, that is typically represented by streamlines and pressure distribution patterns, becomes unsteady at cm/s velocities. Dynamic eddies emerge at various scales, occupying a substantial volume of the fracture channels, increasing the tortuosity of the flow and fluid distribution in fracture branches. Associated pressure fluctuations do not average out at the model scale but are detectable there, possibly reaching magnitudes of ~10% of the total pressure drop across the network. The contribution of inertial losses to the hydraulic head gradient across the network is substantially increased with the onset of non-stationary eddies, confirming that they are the primary source of flow nonlinearity.

Speaker: Mr Cuong Bui (University of Melbourne)

10:05 A new multi-level discrete fracture model for multiphase flow in complex multi-scale fractured systems

In this study, we present a new version of the multi-level discrete fracture model (MLDFM) for multiphase flow in complex fractured systems with features present at various scales. In MLDFM, two levels of unstructured grids conforming with each other are constructed. In a fine-scale grid, both large and small features are represented in conformal DFM manner, and in a coarse grid, only large fractures are conformable depicted. The small-scale features in a coarse grid are dynamicly upscaled as a third continuum similar to the Dual Porosity Dual Permeability model. The DFM treatment for all fractures guarantees accurate solutions for simulations adopting fine-scale grid but unavoidably increases the computational burden. In this work, we developed a computational framework, where the conformal DFM is used to capture the small-scale flow response and homogenize it to the coarse-scale unstructured model applied for forward simulation. An adaptive local-global upscaling formalism is employed to couple the two scale solutions. In detail, we generate local boundary conditions in the fine-scale domain following the basis function interpolation approach and subsequently resolve the flow response. Then, we update the transmissibility for the triple continuum model through the dynamic flow-based upscaling method. Finally, we test the MLDFM approach for several realizations of complex multi-scale fracture systems against fine-scale solution, The simulation results demonstrate the exceptional accuracy and performance of the proposed method.

Speaker: Longlong Li (Institute of Mechanics, Chinese Academy of Sciences)

09:05 → 10:20 MS06-A: 4.1

09:05 CT Gas Tracer Study of Gas Trapping and Diffusion in Foam in Porous Media

Foam improves sweep efficiency in gas-injection processes to sequester CO2 in, and to produce hydrocarbons from, porous geological formations (Bellow, 2023, Rossen et al., 2022). Gas trapping plays a key role in foam’s ability to reduce gas mobility in porous media. We describe a study of gas trapping and diffusion in a sandstone core using nitrogen (N2) foam and krypton (Kr) as a gas-phase tracer.
Surfactant solution and nitrogen were injected, with gas fraction 0.6, superficial velocity 2 ft/day (3.5 x 10-6 m/s), into a 17-cm-long, 4-cm-wide Berea core oriented horizontally in a CT scanner. At steady-state, foam apparent viscosity was 0.4 Pa s (400 cp), and gas saturation was uniform across the core cross-section. Then injection continued with 0.6 gas fraction, but with half the N2 replaced by Kr gas. Krypton can be distinguished in the CT scanner from N2 at the pressure of these experiments (4 MPa). Kr can therefore serve as a tracer in high-pressure foam-flow experiments in cores in place of the more-expensive xenon used by Nguyen et al. (2009). With image filters, it was possible to determine Kr fraction in the gas from the image with a resolution of about 2 mm.
CT images show that the advance of Kr was almost entirely in a thin zone at the top of the horizontal core, with trapped, immobile foam below. (See graphical abstract, where Kr is shown in red.) This is likely the result of segregation of gas and surfactant solution in the core endplate. Similar, though less-severe, segregation originating in the endplate was observed in the foam CT experiments in Kil et al. (2011). Slowly Kr diffused down from the flowing foam at the top of the core, in a similar fashion to diffusion of gas through trapped foam in the coreflood experiments in Kil et al. Our resolution was not sufficient to resolve individual flowing-gas paths in our experiments as in Kil et al., however. A model fit to the CT data indicates that flowing fraction of gas in the core was roughly 0.06, and the Kr diffusion coefficient through trapped gas was 3 to 4 x 10-8 m2/s.
In addition to measuring the flowing gas fraction and diffusion rate of gas through trapped foam, these results highlight the usefulness of Kr as a possible gas-phase tracer in high-pressure foam experiments in porous media. They also highlight the need to account for possible nonuniform injection from the core endplate in multiphase displacements in core samples.

Speaker: Dr JIAKUN GONG (Hohai University)

09:20 Microfluidic experimental study of CO2-water-oil three-phase flow in porous media

Understanding the mechanisms of CO2-water-oil three-phase low is crucial for enhancing oil recovery and improving CO2 storage efficiency. In the present study, with the help of high pressure high temperature microfluid experimental system, the pore-scale CO2-water-oil three-phase flow is directly visualized and the underlying mechanisms of triple-phase flow are revealed.
During the experiments, the contact angle of the microfluidic porous chip is altered to study the triple phase flow with different wettability In water-wet systems, water tends to occupy the small pores, oil exists in the intermediate pores, while CO2 enters the large pores. Gas ganglia disconnected with continuous gas injection do not reconnect and CO2 is displaced in the form of disconnected ganglia by a double/multiple displacement process. In contrast in the oil-wet system, , a three-phase Haynes jump occurs in the pore space during oil replacement by gas.
Under supercritical conditions, it can be observed that the oil droplets are extracted during gas displacement. The CO2 displacement in oil-water filled porous chip which has been already displaced by water can further reduce the oil saturation. The residual oil presents in the form of columns, membranes and corners. In addition, as the gas injection rate is increased from 0.005ml/min to 0.01ml/min, the residual oil content is reduced from 42.11% to 18.35%, indicating greatly enhanced oil recovery. When the gas injection rate is further increased to 0.02ml/min, the increase of the oil recovery is negligible, due to the occurrence of gas channeling.

Speaker: Prof. Li Chen (xi'an jiaotong university)

09:35 An advanced approach for upscaling hydrogen migration in diverse saline aquifers

Leveraging various energy storage techniques spanning daily, weekly, and seasonal cycles offers a pathway to lower carbon dioxide emissions per energy unit. Employing renewable energy for hydrogen production, storage, and recycling emerges as a highly viable tactic to manage seasonal energy fluctuations. Deep saline aquifers provide a practical solution for extensive hydrogen storage, specifically designed to fulfill long-term storage needs. This study introduces a percolation theory-based upscaling technique to lower computational expenses when simulating H2 movement across diverse saline aquifers with varying correlation lengths. Two geological models, each with different correlation lengths, illustrate the efficacy of this method. In the model featuring a 1.2-meter correlation length, the percolation-based upscaling results in H2 saturation errors of 8.76% in the primary area and 3.7% in the sink area, reducing runtime by almost sevenfold. Similarly, in the model with a 4.0-meter correlation length, final H2 saturation errors of 10.7% in the main area and 1.27% in the sink area are achieved, decreasing runtime by nearly fivefold. To enhance the credibility of the proposed upscaling technique, parameters derived from the Brooks-Corey and van Genuchten models are fine-tuned to match experimentally obtained properties of H2-water multiphase flow. The resulting broader-scale model accurately reproduces primary permeability and H2 migration patterns, maintaining errors below 5%. Crucially, key mechanisms governing H2 movement during subterranean hydrogen storage in saline aquifers are retained in the upscaled models, enabling efficient predictions of H2 saturation beneath caprock. This research deepens our insight into the intricate H2 migration at a smaller scale within complex geological systems and sheds light on incorporating the characteristics of small-scale capillary barriers during upscaling.

Speaker: yueyang yu (columbia university)

09:50 Modeling of Gas Chimney Formation During Geological Storage

Fluid-rich chimney-like structures characterized by a high porosity and permeability are widely observed in sedimentary basins. Thus, understanding the mechanisms leading to focused fluid flow is crucial in predicting natural and human-induced fluid leakage, especially in geological sequestration scenarios. Mechanical and reactive porosity waves provide a mechanism predicting spontaneous localization of fluid flow within sedimentary, without relying on predefined flow pathways and fracture structures.
In this study, we have developed a coupled hydro-mechanical model that allow to predict the spontaneous localization and wave-like propagation of porosity anomalies leading to spontaneous formation and evolution of high-permeability channels through lithological boundaries with sharp properties contrasts. The governing equations describe the filtration of pore fluid in deforming viscous-elasto-plastic matrix. The proposed model considers the generation of (de)compaction-driven leakage pathways. We also consider the extension of the model to estimate the effect of reactive fluid flow on leakage pathways formation. Our numerical implementation relies on Matlab prototype and GPU-based code using the CUDA-C programming language to resolve flow localization and channels formation on high resolution solving the coupled hydro-mechanical model at reservoir scales.
Our results provide numerical predictions of fluid-rich chimney formation during geological sequestration for different rheological types of rocks and lithology layers. Results are shown as an application to the Tornerose and the Snøhvit field in the South-West Barents Sea, and seismic imaging is used as a proxy for chimney comparison.

Speaker: Dr Lyudmila Khakimova (University of Lausanne; Skoltech Institute of Science and Technology)

10:05 Experimental investigation of capillary effects on solid-liquid interactions in porous media at the decimetric column scale

The capillary state of water in porous media is of paramount importance at the caprock-aquifer interface to prevent any CO2 leakage. But it also significantly influences gas dissolution and solid mineralization reactions, crucial for CO2 trapping and earth science engineering. Capillarity-based geochemistry has been experimentally documented and quantified at the one-pore sale. Yet, capillary water exerts super-solubilizing effects on solids and gases [1], induces cold boiling, and modifies the stress field within the host matrix [2]. These effects must now be established experimentally at the upper core scale. At this thousands of pores scale, the effect(s) of capillarity competes with the dry conditions intrinsic to unsaturated media that limits the water availability, and with the evolution of the reactive surface area which depends on the liquid/air distribution and the passivation of solid surfaces through secondary phase precipitation. We are discussing the experimental design and first results to help unravel this interwoven sketch, which is much needed for accurate predictions in any long-term scenarios of aquifer-air ‘tandem’ technique (CO2 storage, nuclear wastes tunnels, energy storage, …).

In this study, we examine the brucite (Mg(OH)2) carbonation in unsaturated columns flushed with a CO2 gas flow. The design varied from one experiment to the others by the initial water content, the gas flushing composition, the gas flow rate, and the granulometry of the column materials. These experiments provide simplified models for comprehending carbon mineralization reactions in partially water-saturated porous media, resembling conditions in unsaturated zones of natural systems or disturbed and industrial settings. The main goal of our investigation is to evaluate how capillary water impacts the precipitation of hydrous Mg-carbonates.

Experiments are performed in decimetric unsaturated columns filled with brucite grains and quartz sand (Figure 1). Capillary conditions are established by flushing the column with N2 air at low relative humidity (RH) illustrated below for one dataset (Stage 0, RH 50%, Figure 2). After stabilization, the gas composition is turned to CO2-H2O, initiating carbonation (hydromagnesite formation) by pore-scale interaction between CO2, liquid water, and brucite. The column mass variation shows a first decreasing stage linked to the evaporation of 15% of the initial water, before reaching a plateau, and then displaying an increasing stage related to the carbonation reaction. The CO2 breakthrough curve reveals three distinct stages (Figure 2). Stage 1 exhibits minimal CO2 at the column outlet, primarily due to bulk brucite carbonation. In Stage 2, a decline in reactive brucite abundance slowdowns the carbonation rate, leading to an increase in CO2 content in the effluent gas. Finally, Stage 3 demonstrates a CO2 concentration aligning with the supplied gas composition, signifying the cessation of the carbonation reaction. This is also evident by the stability of the column weight at this stage.

In summary, the evaporation process and the carbonation reaction occurring in an extended pore network at the column scale both appear sensitive to the capillary conditions in porous media which can grow and express oneself depending on various factors that will be discussed in this contribution.

Speaker: Meysam Golmohammadi (ISTO, Université d’Orléans, CNRS, BRGM)

09:05 → 10:20 MS10: 4.1

09:05 Pore- and Nano-scale Imaging of Pore Changes During CO2 Injection in Sandstone

We employed X-ray Computed Tomography (CT) and Scanning Electron Microscopy-Energy Dispersive Spectroscopy (SEM-EDS), alongside a steady-state flow experiment involving calcite-contained sandstone and pre-equilibrated fluids, to study the changes occurring in the pores of sandstone during CO2 injection. In-situ pore-scale imaging showed a significant increase in average porosity, from 23% to 28%. This increase was due to the formation of new pores and the enlargement of existing ones, which occurred earlier in proximity to the injection inlet. Concurrently, pore shrinkage is also observed, typically after the pore enlargement, affecting regions within small pores. The combined effect increased heterogeneity. SEM-EDS provides nano-scale insights, identifying calcite dissolution as contributing to new pore formation, feldspar fragmentation and clay migration as associated with pore enlargement. Furthermore, the blockages induced by clay or fragmented feldspar migration resulted in pore shrinkage. Thus, it is not only the reactive mineral, calcite, that plays a critical role, but also feldspar and clay exert significant influence. Our study clarifies the changes occurring in the pores during CO2 injection into sandstone and highlights the influence of mineral composition on geological CO2 sequestration.

Speaker: Rukuan CHAI (Imperial College London)

09:20 Non-invasive imaging of solute redistribution below evaporating surfaces using 23Na-MRI

Evaporation from porous media is a key phenomenon in the terrestrial environment and is linked to accumulation of solutes at or near the evaporative surface. Such accumulation eventually leads to salinization, soil degradation and weathering of building materials, topics with high economic impacts. A thorough understanding of evaporation and the associated solute accumulation requires the development of physical models describing the most relevant processes and their validation by experiments.
In this context, the current study aims at the understanding of solute accumulation near evaporating surfaces for model porous media at the cm-scale. Analytical and numerical modelling predict the development of local instabilities due to density differences during evaporation in case of saturated porous media with high permeability, which eventually causes density-driven backflow through fingering [Bringedal et al. TPM 2022]. To experimentally investigate this process, we performed evaporation experiments on sand packings with a diameter of 3.1 cm and a height of 4.0 cm prepared with two types of porous media with 1 M NaCl solution: F36 (medium sand) and W3 (fine sand/silt) with porosities of 0.37 and 0.39, respectively. The intrinsic permeability of the two packings differed by two orders of magnitude, i.e. 2.9×10-11 m2 for F36 and 5.6×10-13 m2 for W3. Using magnetic resonance imaging (23Na-MRI), we monitored the development of solute accumulation and subsequent backflow with high spatial (1 mm) and temporal (1 hr) resolution during evaporation with a continuous supply of water at the bottom of the samples (wicking conditions).
Significant differences between the 23Na enrichment patterns were observed for the two types of sand. F36 sand produced an initial enrichment at the surface within the first hour, but soon after a downwards moving plume developed, hence redistributing NaCl back into the column. This was attributed to density driven backflow made possible by the high permeability. The backflow caused a good mixing of the solute during the observation period of 120 h. 1D concentration profiles with depth obtained from the 3D MRI imaging showed that the average concentration reached only 2.5 M, well below the solubility limit of 6.13 M. In contrast, for fine W3 sand with lower permeability, enrichment only took place in a shallow near-surface zone of a few mm with a maximum concentration of 5.1 M after 73 hours of evaporation. No fingering occurred although the mean evaporation rate was similar to that of the F36 sand. These results highlight the major role that porous media properties play in solute redistribution near evaporating surfaces, which was predicted by theory and now confirmed experimentally. The findings encourage further investigations involving different porous media with systematic variation of hydrological properties and the coupling of experimental results to numerical modelling.

Speaker: Mohammad Ali Chaudhry

09:35 Assessing the Efficacy of Thermal-Sensitive Polymer Gels for Temporary Wellbore Sealing: An X-Ray Computed Tomography Analysis

The shift from fossil fuel-based energy sources and toward more environmentally friendly, renewable alternatives highlights how important it is to properly plug and abandon oil and gas wells. Most depleted wells in the energy industry have been allocated for initial-phase abandonment, and cement has long been an appropriate material for permanently plugging these wellbores. Permanent plugging might not be appropriate everywhere, though, as depleted well sites provide a promising option for underground CO2 storage.

This work investigates the possibilities of short-term plugging solutions, with a particular emphasis on the application of novel thermal-sensitive polymer gels as an alternative sealing material. These gels provide a reversible and safe way to seal wellbores, keeping them intact for potential CO2 storage. The investigation of the polymer gel's flow through fractured chalk formations has been performed using X-ray computed tomography.

A wide range of experimental studies have been carried out in conjunction with real-time CT scanning to track the evolution of the polymer gel in chalk formations. The objective of this investigation is to ascertain the ideal concentration of the polymer gel and evaluate its efficacy in providing a temporary closure for the wellbores while ensuring their appropriateness for CO2 storage in the future. The research's conclusions have significant consequences for the oil and gas sector, especially when it comes to environmental sustainability and the shift to cleaner energy sources in the future.

Speaker: Hamed Movahedi (Technical university of Denmark)

09:05 → 10:20 MS11: 4.1

09:05 Robust determination of viscosity of surfactant-polymer solution for enhanced oil recovery using microfluidics approach

Objective:
It is believed that viscous oil-displacement fluids enhance oil recovery (EOR) by modulating the mobility ratio between displacement fluid and oil. According to classical mobility control theory, a lower viscosity ratio of the defending fluid and the invading fluid would allow for better incremental oil recovery. However, core-scale experiments have shown that the viscosity ratio is not always monotonically related to incremental oil recovery. Instead, there is an optimal viscosity. The determination of viscosity for non-Newtonian fluids, which are the primary composition of chemical flooding, is inherently elusive. This has become an important issue in the application of chemical oil-displacement agents to reservoirs. While core-scale experiments can aid in viscosity design, extensive experimental work can impede research progress. Microfluidic is an advanced technique that enables in-situ visualization within porous media. In this study, we propose a microfluidic approach to enable rapid decision-making on the viscosity of viscous chemical oil-displacement agents.
Method:
Microfluidic experiments using PDMS chips were conducted to perform surfactant-polymer (SP) experiments at different polymer molecular weights and concentrations. The experimental results were analyzed using our previously proposed image algorithm (Gao,2021) for multi-scale pore recovery coupling with z-score method, which allows for characterization of the viscosity matching degree in different planar pore radii. Finally, the hydraulic radius approach is applied to upscale the planar pore radius in microfluidics to permeability of the reservoir. This enables the graphical plotting of matching degree between reservoir permeability and apparent viscosity.
Results：
The microfluidic experimental results confirm that higher viscosity does not lead to better incremental recovery. Instead, there exists an optimal viscosity. The viscosity of the displacement agent and the pore have a matching relationship, and a higher matching degree corresponds to a higher recovery. For HPAM-based SP solutions, a lower viscosity is observed at lower pore radii. With average pore radius in the range of 3-14μm, the most appropriate viscosity is in the range of 9-42cP. In same viscosity SP solutions, a high concentration of low molecular weight was found to be more effective in EOR than a low concentration of high molecular weight. The reason for this is that higher concentration gradients are conducive to the mobilization of residual oil in the smaller pore spaces.
Novel：
This work provides new insights into the microfluidic applications for EOR. Compared to extensive core experiments, microfluidics offers the advantage of characterizing mobilization in multi-scale pores simultaneously. This approach requires only a few experiment to achieve the same results as more than a dozen core-scale experiments, thus significantly reducing the effort and time required. On the other hand, microfluidics has the advantage of allowing in-situ visualization in porous media, which facilitates the understanding of the performance and mechanism of chemical oil-displacement agent, and has the potential to replace core-scale experiment to some extent in phenomenological research.

Speaker: Dr Wenbin Gao (Institute of Rock and Soil Mechanics, Chinese Academy of Sciences)

09:20 Study on Oil Displacement Mechanism of Polymer Microspheres Based on Microfluidic Technology

As a novel type of profile control material, polymer microspheres have the characteristics of easy for injection, able to blockage and movable, which make the application in oil production has gradually expanded. This article is based on microfluidic experiment, combined with fluorescence component tracer technology, to clarify the oil displacement mechanism of polymer microspheres from a microscopic perspective.
Polymer microspheres with fluorescence properties are selected as experimental materials, and ideal microscopic models with simple channel pattern are used to conduct experiments under fluorescent and non-fluorescent conditions respectively. The mechanism of polymer microspheres is studied from three aspects: aggregation rules, migration characteristics, and morphological changes. The typical reservoir channel models are designed and made based on casting thin sections. And the effect of polymer microspheres flooding is evaluated through displacement experiments. Then using the previous conclusions to explain experimental phenomena, and the accuracy of the oil displacement mechanism is further demonstrated.
It is found that the polymer microspheres tend to act as emulsion aggregates during the displacement process. Part of microspheres injected tend to accumulate at the inlet end, and the other microspheres successfully injected into the model will enter the relatively high-permeability region along the dominant water channeling channel. After the hydration and expansion of microspheres, the particles are interconnected, forming a "microsphere partition" to block the subsequent water flow, and changing the direction of fluid flow, thereby expanding the sweep area to enhance oil recovery. With the increase of injection time, the effect is affected by the degradation failure or the desorption movement of the microspheres. Polymer microspheres exhibit varying degrees of stimulation effects in different types of reservoirs, but they are more suitable for blocking channels with high permeability in relatively homogeneous reservoirs. Therefore, the matching between the blocking agent and the channel should be fully considered when selecting the blocking adjustment measures to further improve the effectiveness of the scheme design and parameter setting.
In this paper, the oil displacement mechanism of polymer microspheres is clarified and its accuracy is verified. This understanding is of great significance for the interpretation of experimental phenomena, the improvement of numerical simulation methods and the explanation of field application effects. It also provides reference value for the optimization of microspheres application scheme design and the adjustment of on-site implementation measures.

Speaker: Mengqi Ma

09:35 Study on the percolation mechanism and oil displacement mechanism of a mixed solution of polymer and silica nanoparticles

Polymer flooding is one of the important means to improve oil recovery during oilfield development. However, the performance of polymers is limited by temperature and salinity, which affects their oil displacement effect in reservoirs. Recently, studies have found that a mixed solution of polymers and nanoparticles can enhance the rheological properties of polymers and improve their oil displacement efficiency, especially in harsh geological environments where this promotion effect is more pronounced. However, research on polymer nanoparticle mixed solutions is still in its early stages, and there are few articles on the rheological properties, flow field distribution, and permeation mechanism of polymer nanoparticle mixed solutions. The aim of this experiment is to investigate the rheological properties of polymer nanoparticle mixed solutions and their promoting effect on reservoir recovery. By using a high-temperature and high-pressure rheometer, the rheological properties of a mixed solution of silica nanoparticles and partially hydrolyzed polyacrylamide were analyzed. Based on the viscosity temperature relationship, creep and creep recovery, and amplitude oscillation shear response, the viscoelastic properties and shear resistance of the mixed solution were evaluated, and the influence of silica nanoparticles on the polymer network structure was studied. Due to the unique rheological properties of mixed solutions, studying the flow state of mixed solutions in the flow channel is also crucial. In this study, a microchannel particle image velocimetry system was used to study the flow field of mixed solutions in contraction channels and porous media, and combined with a micro displacement device, the basic properties of the mixed solution were linked to actual seepage. The results indicate that silica nanoparticles can form hydrogen bonds with polymer molecular chains, and through physical crosslinking, form more complex macromolecular network structures, which can improve the rheological properties of polymers under high temperature and high salt conditions; The flow field experiment shows that as the rheological properties of the mixed solution increase, a symmetric vortex will form in the contraction channel of the mixed solution, and it can exist stably. The displacement effect of the mixed solution at the blind end position in porous media is better, and the stronger the rheological properties of the mixed solution, the better the displacement effect at the blind end position; Microscopic oil displacement experiments have shown that the better the rheological properties of the mixed solution, the better the oil displacement effect in porous media, and the more obvious the equilibrium displacement effect on non-mean porous media.

Speaker: Yu Xue (China University of Petroleum (East China))

09:50 Influence of fluids properties and pore-throat structure on snap-off: microfluidic experiments and theoretical analysis

The snap-off phenomenon occurs when a non-wetting phase flows from a water-wet constriction into a pore filled with water, resulting in the separation of the non-wetting phase into droplets. This phenomenon is commonly observed in various fields such as petroleum development, chemical engineering, and carbon utilization and storage. Numerous studies have investigated the underlying mechanism and identified critical capillary numbers associated with snap-off. However, there is a limited amount of research that specifically examines the impact of fluid viscosity and pore-throat structure parameters on this phenomenon.
In this work, we study the snap-off process when the oil droplet passing through the microchannel with a rectangular cross-section. The microfluidic chips are made of PMMA and have different constriction widths, heights, and lengths. By compounding silicone oil with different viscosities, we were able to modify the viscosity of the non-wetting phase. Through microfluidic experiments, we analyzed various snap-off patterns. Furthermore, we constructed a phase diagram illustrating the snap-off behavior under diverse oil viscosities and pore throat structural parameters.
The findings demonstrate that there is an inverse relationship between the viscosity of oil and the critical capillary number of snap-off, as well as the range of capillary numbers associated with snap-off. This can be attributed to the fact that the viscous force hinders the snap-off. When the capillary number reaches a certain threshold, the oil flows through the pore throat rapidly, preventing the water film from adequately entering the throat to establish a force equilibrium. The capillary number range associated with snap-off expands as the throat length and depth increase. Snap-off is observed only when the throat depth surpasses a specific threshold value. In addition, the capillary number does not influence the size of daughter droplets, and they are approximately 1.3-1.5 times the diameter of the throat. This investigation could help control the snap-off occurrences in engineering scenarios through the manipulation of fluid parameters and capillary structure.

Speaker: Bei Wei (China University of Petroleum)

10:05 Conditions Allowing Steady Multiphase Flow in Microfluidic Devices

Microfluidic devices allow direct observation of interfacial phenomena and multiphase flow in porous media. However, they have difficulty representing steady multiphase flow without fluctuating occupancy of locations in the network. The ability of two phases to form steady, intertwined flow pathways is an essential property of 3D pore networks (Sahimi, 1994; King and Masihi, 2019); fluctuating pore occupancy occurs at elevated capillary number (Gao et al., 2020). A two-dimensional network can represent this only if the flow paths of the two phases cross at some locations in the network (Fisher, 1961). Crossing is possible in a microfluidic network if wetting phase can form a bridge across the top and bottom of a gap between grains at a pore throat while nonwetting phase flows through the throat, as illustrated in the graphical abstract, left figure.
We review conditions for existence of quasi-static flow pathways in conventional microfluidic geometries. We examine whether paths can cross in several different throat geometries (Cox et al., 2023) using the Surface Evolver software (Brakke, 1992). For relatively long straight or curved throats, the most common geometry in microfluidic networks used to study flow in geological formations (see graphical abstract, center and right figures), the capillary pressure for bridging is the same as that for snap-off. As a result, phases displace each other in turn in the network, even at the very lowest capillary number.
Concave throats, as between cylindrical barriers, can support bridges over a substantial range of capillary pressure. The range of capillary pressures at which bridging is stable increases as throats become more strongly concave (i.e., pillar radius decreases) and for narrower throats. Steady two-phase flow would be possible in networks of pores with throats of this geometry.
For networks of this geometry, we estimate the range of fractional flows of wetting and nonwetting phase that could be sustained (Obbens, 2022). To get past pore bodies occupied with nonwetting phase, wetting phase is restricted to the corners at the top and bottom of the pillars, shown in the graphical abstract, left figure. We input flow geometries determined by the Surface Evolver into the COMSOL numerical flow solver to estimate relative permeabilities of both phases for a given network realization. We choose assumptions that favor the flow of the wetting phase: for instance, penetration of the nonwetting phase just to the point where it connects across the network. The results show that the relative permeability of the wetting phase is roughly 1/10 of that of the nonwetting phase. Given the assumptions made, this is a generous estimate. If viscosities of the two phases were roughly equal, the maximum fractional flow of wetting phase would be 0.1. For gas-water studies, where the viscosity ratio can be 50:1, the maximum fractional flow of water would be 0.2%. Imposing a fractional flow above this would guarantee fluctuating pore occupancy in the network.

Speaker: William Rossen (Delft University of Technology)

09:05 → 10:20 MS12: 4.1

09:05 Micromechanical Coupling of Irregular Particles and Fluid

Exploring the complex interplay between granular materials and accompanying fluids is an intricate problem, as their morphological properties add layers of complexity to the interplay of inertial, viscous, frictional, and elastic forces, which can make modeling such systems difficult. Here, we introduce a novel coupled framework designed to study the impact of particle morphology on granular particle dynamics. Our micro-mechanical model sheds light on the mechanical behavior, revealing significant influences from particle morphology. Interestingly, the presence of fluid mitigates movement differences induced by particle shape. Demonstrating these insights through a collapse process, we observe that the fluid’s viscous and lubrication effects distinctly hinder and enhance dislocation, respectively. Notably, the dominance of fluid lubrication intensifies with increasing irregularity in particle shapes.

Speaker: Pejman Tahmasebi (Colorado School of Mines)

09:20 Adsorption induced Effective Stress in Porous Media

Adsorption and capillarity, in the order of high free energy to low, are the two soil–water interaction mechanisms controlling the hydro-mechanical behaviour of soils. Yet most of the poroelasticity theories of soil are based on capillarity only, leading to misrepresentations of hydro-mechanical behaviour in the low free energy regime beyond vaporisation. This inability is reasoned to be caused by two major limitations in the existing theories: missing interparticle attraction energy and incomplete definition of adsorption- induced pore-water pressure. A poroelasticity theory is formulated to incorporate the two soil–water interaction mechanisms, and the transition between them – that is, condensation/vaporisation, by expanding the classical three-phase mixture system to a four-phase mixture system with adsorptive water as an additional phase. An interparticle attractive stress is identified as one of the key sources for deformation and strength of soils induced by adsorption and is implemented in the poroelasticity theory. A recent breakthrough concept of soil sorptive potential is utilised to establish the physical link between adsorption-induced pore-water pressure and matric suction. The proposed poroelasticity theory can be reduced to several previous theories when interparticle attractive stress is ignored. The new theory is used to derive the effective stress equation for variably saturated soil by identifying energy-conjugated pairs. The derived effective stress equation leads to Zhang and Lu’s unified effective stress equation, and can be reduced to Bishop’s effective stress equation when only the capillary mechanism is considered and to Terzaghi’s effective stress equation when a saturated condition is imposed. The derived effective stress equation is experimentally validated for avariety ofsoil in the full matric suction range, substantiating the validity and accuracy of the poroelasticity theory for soil under variably saturated conditions.

Speaker: Chao Zhang

09:35 Prediction of CO2 Injectivity into Low-temperature Water Zones below Natural Gas Hydrate Reservoirs for Non-Leaking Storage

Abstract

The potential leakage of carbon dioxide (CO2) from traditional underground carbon storage reservoirs has become a growing concern. This study suggests a novel approach — injecting CO2 into subsea water zones situated under natural gas hydrate reservoirs. The objective is to store CO2 within the water zones in hydrate form, thereby minimizing the risk of future CO2 leaks. Assuming a sufficiently rapid flow of CO2 during injection to prevent hydrate formation, an analytical model was developed to predict well’s CO2 injectivity. The case study utilizing data from the natural gas hydrate reservoir in the Shenhu area, Northern South China Sea, indicates that the CO2 injectivity of a water zone underlying a natural gas hydrate reservoir is significantly influenced by the transmissibility of the water zone. With water zone transmissibility values varying within a range of -50% to +50% around the mean value of 15.79 Darcy-cm, well injectivity is projected to be nearly proportional to water zone transmissibility, ranging from 6 tons/day to 16 tons/day. Interestingly, CO2 injectivity in the water zone exhibits minimal sensitivity to the permeability of the natural gas hydrate reservoir. In the examined case, the anticipated CO2 injection rate is expected to vary only slightly, ranging from 10.5 tons/day to 11.5 tons/day, even with a permeability uncertainty of the gas hydrate reservoir ranging from 1 md to 3 md. The injectivity of a well completed in the water zone aligns with that of a well completed with frac-packing in the natural gas hydrate reservoir. Both types of wells are anticipated to inject CO2 at a flow rate ranging from 6 tons/day to 16~17 tons/day, contingent upon the transmissibility of the water zone and the transmissibility of the hydraulic fracture. Notably, injecting CO2 into water zones, as opposed to frac-packed natural gas hydrate reservoirs, offers the advantage of cost savings by eliminating the need for hydraulic fracturing.

Speaker: Boyun Guo (University of Louisiana at Lafayette)

09:50 Evaluation of Relative Diffusivity of Hydrogen-Methane System for Underground Hydrogen Storage in a Depleted Gas Reservoir Using a Novel Pore-Scale Reactive Transport Model

The depleted gas reservoir is considered as one of attractive ways for underground hydrogen storage (UHS). However, due to the chemical reaction during UHS, the diffusion coefficient of the H2-CH4 binary system is more difficult to evaluate. The objective of this paper is to establish a novel pore network model merging H2 reactive transport to evaluate the relative diffusivity of the H2-CH4 system for UHS in depleted gas reservoirs.
Firstly, a stochastic pore network model was constructed based on the pore-throat diameter distribution of a depleted gas reservoir. Then, the concentration and rate functions were defined in the pore network model, in which the diffusion transport through porous media was expressed by the Fick's law. And a power-law chemical reaction equation for H2-rock was added as the source term. Finally, the curve of the relative diffusion coefficient vs. hydrogen concentration of the H2-CH4 binary system was obtained by solving the governing equations, which could be used to determine the impacts of diffusion during UHS in depleted gas reservoirs.
The results show that the diffusion coefficient of the H2-CH4 system is related to H2 concentration, porosity, pressure, etc. The H2 diffusion coefficient is proportional to H2 concentration and pore-throat size but inversely proportional to pressure. The diffusion coefficient under low pressure is about 20 times that under high pressure. Under the temperature of 40°C and the porosity of 0.247, the effective diffusion coefficient decreases from 2.4×10-7m2/s to 6.03×10-8m2/s when the pressure increases from 5MPa to 20MPa. Under the temperature of 40 °C and the pressure of 10MPa, the effective diffusion coefficient increases from 3.7×10-8m2/s to 1.21×10-7m2/s when the porosity increases from 0.2 to 0.32. Furthermore, under the temperature of 40°C, the porosity of 0.247 and the pressure of 10MPa, the H2 effective diffusion coefficient is about 5×10-9m2/s when the H2 concentration is 0.4, while the effective diffusion coefficient increases to 4×10-8m2/s when the H2 concentration is 0.6. In addition, considering the CH4 creation by the chemical reaction of H2, the H2 effective diffusion coefficient decreased due to the decreasing of H2 concentration and the increasing of CH4 concentration.
A novel pore network model merging H2 reactive transport was proposed in this paper to evaluate the relative diffusion coefficient of the H2-CH4 system during UHS in depleted gas reservoirs. The methodology could provide a reference for UHS in depleted gas reservoirs.

Speaker: Qiuyue Zhang

09:05 → 10:20 MS15: 4.1

09:20 Solving seepage equation using physics-informed residual network without labeled data

Physics-informed neural network (PINN) is an innovative universal function approximator which adds physical constraints to neural network to make the fitting results satisfy the physical laws better. In this paper, a physics-informed residual network (PIResNet) is proposed to solve the single-phase seepage equation without labeled data. The loss function is constructed by summarizing the residuals of the discretized seepage equation based on the finite volume method (FVM), and the boundary conditions are embedded in the PDE residuals in a ‘‘hard constraint’’ way. The PIResNet is simple in network structure, fast in convergence and easy to optimize. Furthermore, the convergence of the residual structure used in this paper is proved and the theoretical analysis of time complexity illustrates the computational efficiency of PIResNet. The correctness of the proposed method is proved and the experiments display that the solution time of PIResNet is reduced by more than six times compared to physics-informed convolutional neural networks (PICNN). (Note: This paper has been published in Computer Methods in Applied Mechanics and Engineering.)

Speaker: Shuaijun Lv (Hefei University of Technology)

09:35 Efficient Surrogate Modeling of Subsurface Flow in Porous Media Using Transfer Learning with Multifidelity Data

ABSTRACT
In subsurface flow settings, deep-learning-based surrogate modeling is shown to be an effective approach to deal with cases that require a substantial amount of model simulations. However, a large number of high-fidelity training simulations are usually required to construct these deep-learning-based surrogate models. For large-scale models, it can be computationally prohibitive to perform these training simulations. To address this limitation, in this work, we develop a new approach to construct surrogate models using transfer-learning with multifidelity training data. The model is based on a U-Net deep-learning architecture, wherein we introduce a specialized input layer, in order to allow for gradual model fine-tuning with multifidelity data, and an embedded layer that is designed to deal with time-varying source/sink terms. The procedure of building such surrogate models can be divided into three steps. In the first step, a relatively large amount of low-fidelity simulations, generated from upscaled coarse models, are used to build a pre-trained deep-learning model. In the second and third steps, the input, output, encoder, embedded, and decoder layers of the model are progressively fine-tuned, requiring a relatively small number of high-fidelity simulations. In this study, we use 400 low-fidelity and 100 high-fidelity training simulations, which leads to about a 70% reduction in computational cost of the overall procedure. The proposed procedure is applied to three cases with different number and locations of source/sink wells. In all cases, our proposed surrogate models trained using multifidelity data provide predicted dynamic pressure and saturation fields that are in close agreement with the corresponding model trained using only a large number of high-fidelity data. In addition, our introduction of the embedded layers is shown to effectively improve the prediction accuracy of the surrogate model when dealing with time-varying source/sink well terms, in comparison with traditional approaches based on similar network architecture.

Keywords：Subsurface Flow Simulation; Porous Media; Surrogate Model; Transfer Learning; Multifidelity Training Data;

Speaker: Mr Wenyue Sun (China University of Petroleum East China)

09:50 Super-resolution imaging of multiphase fluid distributions in porous media using deep learning

X-ray imaging has become an indispensable tool in the study of porous media, significantly enhancing our understanding of multiphase flow within these pore structures. High-resolution X-ray images enable researchers to accurately measure or calculate critical rock properties such as porosity, interfacial surface area, curvature, and contact angle distributions. These images are also pivotal in determining capillary pressure from local interfacial curvatures. Achieving high-resolution images with a large field of view (FOV) is crucial for obtaining accurate and representative geometrical and physical properties, yet balancing FOV with resolution remains a formidable challenge. Recently, super-resolution imaging techniques using deep learning have demonstrated considerable potential in addressing this issue. We have successfully implemented an Enhanced Deep Super-Resolution (EDSR)-based method on multiphase flow images, which produced high-resolution results while expanding the FOV. A rigorous comparison with ground truth confirms that our super-resolution outcomes are consistent with the ground truth. This breakthrough is particularly significant as it provides more detailed and expansive insights into fluid behaviour in porous media, thereby paving the way for future advancements in geological research and practical applications.

Speaker: Zhuangzhuang Ma

Jack_InterPore_slides.pptx

09:05 → 10:20 MS17: 4.1

09:05 Effect of pH on the Competitive Adsorption Behavior of CO2/CH4 in Shale Inorganic Nanopores from the Molecular Simulations

Objectives/Scope:
Geological Carbon Storage (GCS) in depleted tight reservoirs is considered a promising technology for reducing carbon dioxide emissions. These tight reservoirs feature numerous nanoscale pores that provide ample adsorption space for gases. However, the pH values of the reservoir pores vary, and the extended exposure to different pH environments over time can result in distinct surface properties of inorganic nanopores on quartz (pH effects characterized by the deprotonation degree of silanol groups on the quartz surface). This variability may impact the adsorption capacity of gases, but the mechanisms remain unclear. Therefore, a comprehensive understanding of gas adsorption mechanisms, considering reservoir pH values, is crucial for CO2 sequestration and enhancing methane recovery rates (EGR). This study employs GCMC simulations to investigate the competitive adsorption mechanisms of CO2/CH4 in shale inorganic nanopores on quartz, taking into account reservoir pH conditions.
Methods/Procedures/Process:
The adsorption of CO2, CH4, and a CO2:CH4=1:1 mixture was investigated at reservoir conditions of 353.15K and pressures up to 50MPa. The pH conditions ranged from 2-5, 5-7, to 7-9, corresponding to deprotonation degrees of 0%, 9%, and 18%, respectively. Quartz nanopores, CH4, and CO2 were modeled using the CLAFF, TraPPE-UA, and TraPPE-EH models. GCMC simulations were conducted using the MCCCS Towhee software. Each simulation consisted of 2×108 steps in total, with 5×107 steps for equilibration and 1.5×108 steps for statistical sampling. Atomic trajectories were saved every 2000 steps for subsequent data analysis. Using the simulated results, we computed the one-dimensional and two-dimensional density distributions of gases, as well as the excess adsorption. Additionally, we accounted for changes in adsorption phase volumes under three pH environments to calculate the absolute adsorption amounts.
Results/Observations/Conclusions:
The study revealed that with an increase in deprotonation degree, the adsorption phase volumes of CO2 and CH4 slightly increased in both single-component and competitive adsorption scenarios. In competitive adsorption, the injection of CO2 exhibited a more pronounced effect in reducing the adsorption density of CH4 as the deprotonation degree increased（corresponding increase in pH） In single-component adsorption, both the excess adsorption and absolute adsorption of CO2 increased with the increasing deprotonation degree, while the impact on CH4 was minimal. In competitive adsorption, CO2 significantly decreased the excess adsorption of CH4, and beyond a pressure of 30MPa, the excess adsorption even became negative. With an increase in deprotonation degree, both the excess adsorption and absolute adsorption of CO2 increased, while the adsorption of CH4 slightly decreased. This suggests an enhancement in the competitive adsorption capability of CO2.
*Applications/Significance/Novelty:
This study provides molecular-level insights into the adsorption behavior of CO2/CH4 in quartz nanopores under varying pH conditions. The findings contribute to establishing a theoretical foundation for CO2 storage and methane recovery enhancement under reservoir conditions with different pH levels.

Speaker: Shaofeng Ning (Chengdu University of Technology·)

09:20 Simulation study on the distribution of water - gas domains and two-phase seepage characteristics of coal based on the cavity throat network model

In order to investigate the influence of water gas domain distribution on the relative permeability of water and gas during the injection of hot water into coal, this paper establishes a two-dimensional pore cavity throat model based on fractal theory, and uses the water gas dynamic equilibrium equation as the judgment condition for seepage calculation. The water and gas balance control equation of the cavity throat network was derived, and the distribution law of the water gas domain during coal seam thermal injection and drainage gas production process was clarified. Finally, the relationship between water injection pressure, fractal dimension, temperature and relative permeability was obtained. In the study of constant temperature water injection process, it was found that as the injection pressure increases, the gas chamber is constantly occupied by water, the saturation of water continuously increases, and the relative permeability of water significantly increases. The injection pressure is positively correlated with the relative permeability of water. During the constant pressure heating and drainage process, the increase in free methane leads to an increase in gas pore pressure in the model, overcoming capillary forces to discharge water. The higher the temperature, the water chamber is occupied by the gas chamber, and the distribution of the gas domain is wider. When percolation occurs, the relative permeability of the gas increases sharply, which is positively correlated with temperature and conducive to the discharge of water.

Speaker: Dong Zhou (Taiyuan University of Technology)

09:35 Investigating the effects of temperature and moisture on CH4 recovery after CO2 injection: flow simulation based on coal pore network model

The massive burning of fossil fuels has led to a dramatic increase in the level of CO2 in the atmosphere, which has greatly affected the global ecology and climate. CO2 enhanced coalbed methane recovery technology not only reduces the CO2 footprint in the atmosphere, but also effectively promotes the extraction of CBM. Coal has strong heterogeneity and dual pore structure, and after CO2 is injected into the coal reservoir, a complex binary gases (CO2 and CH4) flow and multi-physical field coupling problems will occur. we are still confronting of tricky challenges in study the flow of binary gases under multi-field coupling conditions in complex pore networks.
In order to truly restore the pore structure of coal and the flow characteristics of binary gas, this work conducted X-ray scanning on coal samples collected in South Junggar, China, and 3D reconstructed the coal samples using the obtained two-dimensional CT slices. Based on the reconstructed pore network model, permeability simulation was performed using the finite element method. Penetration and diffusion of binary gases and water as well as heat and mass transfer are considered during the simulation. This study aims to investigate: (1) The main factors controlling the competitive adsorption/desorption capabilities of binary gases. By comparing the simulation results of different CO2 injection pressures, reservoir temperatures and moisture content, to clarify the main factors affecting the competitive adsorption capacity of CO2 and CH4. (2) Reservoir temperature changes induced by binary gas adsorption/desorption. Gas adsorption is an exothermic reaction, and the desorption is an endothermic reaction. Due to the adsorption/ desorption dynamic changes of dual gases in the system, the temperature of the reservoir has a periodic law. (3) Permeability evolution rules of binary gases and recovery efficiency of CH4. Reservoir temperature and water content in pore network have a great impact on gas production efficiency. By ignoring and considering two factors during the simulation process, to determine the impact on the permeability change of the binary gas and the recovery efficiency of CH4.

Speaker: Dr Qiaoyun Cheng (School of Earth Resources, China University of Geosciences, Wuhan 430074, PR China Key Laboratory of Tectonics and Petroleum Resources of the Ministry of Education, China University of Geosciences, Wuhan 430074, PR China Coal Reservoir Laboratory of National Engineering Research Center of CBM Development & Utilization, School of Energy Resources, China University of Geosciences, Beijing 100083, PR China)

09:50 Elastic properties evolution of carbonate rocks during reaction induced by carbon dioxide injection

The sequestration of carbon dioxide in deep underground reservoirs is proposed as a strategy to alleviate atmospheric greenhouse gas emissions. Upon introduction into the host brine, carbon dioxide dissolves, creating an acidic solution. This acidity can subsequently engage with the host rock, prompting dissolution, particularly in carbonate formations. The mechanical change of host rock brought by this dissolution could be evaluated by the change of elastic properties( bulk and shear modulus). We performed pore scale simulations to examine the alterations in the micro-structure of rocks induced by the injection of $CO_{2}$-saturated brine, focusing on understanding the consequential evolution of the elastic properties of carbonate rocks. We modeled the evolution of the pore structure during dissolution by Volume of Solid method(VoS method), a finite volume method, and then calculated the changes in elastic properties by finite element method, combining with the effective medium theory. During our simulation, estaillades carbonate core is injected with $CO_{2}$-saturated brine at 50 °C and 10 MPa. After determining the accuracy of the simulation by comparing the reaction rate with that of the experiment under the same conditions, the changes in elastic properties was calculated. The efficiency of the VoS method lies in its computational simplicity, eliminating the need for remeshing or any specialized handling of topological changes.

Speaker: Yuxuan Zhang (University of Aberdeen)

10:05 Study on pore-fracture morphology and mineral-induced acid-heat-flow-solid simulation of coal under supercritical CO2

Introduction
Carbon capture and storage (CCS) in geological reservoirs has emerged as a rapidly effective option for mitigating the accumulation of greenhouse gases [1,2]. However, the flow and reactions of supercritical CO2 (SCCO2) within coal seams entail a complex process, encompassing minerals dissolution and precipitation, adsorption behaviour, microstructural changes and mechanical weakening effects [3]. These factors hold a crucial role in ensuring the secure and long-term geological storage of CO2 in deep reservoirs. However, existing models mainly focus on temperature, flow and mechanics, leaving a significant gap in the multi-physics field considering the effect of SCCO2 acidification on coal structure in deep reservoir. On this basis, a comprehensive acid-thermal-flow-solid model was developed and established to account for mineral dissolution processes. This model was employed to study the influence of coal pore-fracture morphology and mineral distribution on the assessment of SCCO2 geological sequestration in deep reservoirs, thereby addressing the limitations inherent in existing models concerning the characteristics of CO2 storage in deep reservoir.
Methodology
A geometric model representing a circular reservoir was constructed. Within this model, the wellbore radius was defined as 0.1 m, while the radius of the matrix region was established at 1 m. The mesh distribution employed throughout the simulation is depicted in Fig. 1. Natural fracture distributions were incorporated in the model, with the permeability of these natural fractures typically being 1,000 times that of the matrix permeability.
Results and Discussion
A reduction in porosity was observed radiating from the wellbore towards the boundaries under interactions with SCCO2, with this distribution being influenced by fractures. An increase in the initial porosity of the coal samples corresponded to a more significant alteration in porosity after exposure to SCCO2, as depicted in Fig. 2. Following SCCO2 interaction, reservoir porosity increments resulting from adsorption expansion, dissolution, and total porosity were observed to decrease with an increase in initial porosity. The reservoir's total porosity was found to be 1.24 to 1.56 times that of its initial state after SCCO2 treatment. The increase in total reservoir permeability was found to intensify over time; nevertheless, as the reservoir's initial porosity increased, this enhancement was decreases gradually. For coal samples with initial porosities of 0.05, 0.06, 0.07, 0.08, 0.09, and 0.1, the corresponding permeability increments were determined as 23.57, 15.11, 10.45, 7.80, 6.11, and 4.98, respectively. This indicates that the lower the initial porosity of the reservoir, the more pronounced the alteration of its flow characteristics by SCCO2.

Fig. 1. Geometric model and simulation results. a) The grid distribution of the reservoir's geometric model. b) The porosity distribution of reservoirs with different initial porosities after exposure to SCCO2. c) The variation in porosity of reservoirs with different initial porosities after exposure to SCCO2. d) The variation in permeability of reservoirs with different initial porosities after exposure to SCCO2.

Speaker: Mr Saipeng Huang (Chongqing University)

10:20 → 11:50 Poster: Poster Session VII

10:20 A Fractal Interpretation of Archie-like Equation for Partially Saturated Porous Media

In the realm of geophysical exploration, predicting the microstructural and fluid distribution information (e.g., porosity and saturation) of rocks based on electrical conductivity data present a formidable challenge. Fortunately, the electrical conductivity exhibits a straightforward power-law relation with porosity and saturation in logarithmic plotting for reservoir rocks. Nevertheless, its exponents, respectively called cementation exponent and saturation exponent, are usually explained to empirical parameters. In order to understand their physical meaning, we present a theoretical electrical conductivity model with power-law form using fractal geometry and analyze its results in different water contents. We find that these exponents consist of fractal dimension (defining as the filled degree of an object in space) and have a similar form. The brief expression of these exponents shows what controls the variety of electrical conductivity with porosity and saturation. Because of the form, we also could confirm the relation between the cementation exponent and the saturation exponent, and present a bounds model to restrict the range of the electrical conductivity depending on porosity and saturation. It is helpful to reduce the complexity of predicting electrical conductivity.

Speaker: Wei Wei

10:20 A variational hydraulic fracturing model for simulating the hydraulic fracture propagation in fracture-caved porous media

The fracture-caved porous media contains numerous irregular natural fractures and caves, leading to multiscale pore structures. The geometry of these pore structures can impact the mechanical characteristics of the porous media, and also significantly affect the hydraulic fracture propagation path. This study presents an innovative hydraulic fracturing model designed to simulate the fracture propagation within fracture-caved poroelastic media, leveraging the capabilities of the phase-field method. Initially, the fracture-cave-reservoir flow governing equations are established through coupling generalized Reynolds flow in the fracture domain, Darcy flow in the reservoir domain and free flow in the cave domain. Biot poroelasticity theory and fracture width serve as the links for hydro-mechanical coupling. To address sharp fractures and cave edges, a smooth phase-field method is introduced. The fully coupled model is solved using a staggered scheme, which independently addresses the pressure and displacement fields in the inner cycle, and then addresses the phase-field in the outer cycle. In contrast to prior research, our model eliminates the need for supplementary enrichment functions to characterize natural fractures and caves. It can naturally detect and simulate the behavior of hydraulic fracture propagation in the presence of natural caves. This alleviates the complex calculations of stress intensity factors as hydraulic fracture nears caves. The efficacy of the proposed model in addressing two-dimensional scenarios is thoroughly demonstrated. Subsequently, the model is expanded to encompass three-dimensional scenarios and multiple cave instances.

Speaker: Jie Jin (University of Science and Technology of China)

10:20 Breaking the classical approach: achieving homologous topology modulation of Hydrogen-Bonded Organic Frameworks

Classical synthesis of hydrogen-bonded organic frameworks (HOFs) involve several steps, making challenging the systematic construction of isoreticular HOFs, due to the flexibility and easily disruption of the connection linkages be-tween OLs.1 Herein, we develop an “integrated synthesis-assembly” (ISA) methodology for constructing a series of homologous topological DAT-C6-HOFs (-1, -2 and -3) by minimizing the possibilities of being disrupted during the synthesis and assembly of HOFs. The pore sizes and microenvironments of the yielding DAT-C6-HOFs can be tuned by varying the structural modulation of π-bridge on C3-symmetric cyano-precursors (C3-CPs). Moreover, the obtained DAT-C6-HOF-1 exhibited highly selective sensing towards perfluorooctanoic acid (PFOA) among homologous molecules, based on the matched of pore size and the synergistic regulation of intra- and inter- molecular charge transfer excited states. The definition of the ISA method not only provides new ideas for the de-velopment of synthetic methods for DAT-HOFs and other kinds of HOFs, but also opens up new avenue for the derivation of the templates for the oriented as-sembly of HOFs as well as the structural modulation of HOFs.

Speaker: 艳雪 商 (中国石油大学（华东）)

Breaking the classical approach achieving homologous topology modulation of Hydrogen-Bonded Organic Frameworks.pdf

10:20 Coupling Deep Learning with Progressive Growing Generative Adversarial Networks and Data Assimilation for Inverse Modeling in Complex Aquifers

The presence of hard data in geostatistical modeling and optimization problems is important in performing efficient parameter estimation. The hard data at specified points in the model domain serve as a guide in optimizing the unknown parameters to follow the patterns of the hard data. Recently, a novel approach to solving hydrogeologic/reservoir modeling problems has emerged by using deep generative models, specifically generative adversarial networks (GANs), to generate realistic and diverse images of channelized aquifers. This subsequently can be coupled with other geostatistical methods to solve parameter estimation problems. This study focused on using an improved GAN, called a progressive growing generative adversarial network (PGGAN), conditioned with hard data to perform parameter estimation of complex facies models by coupling an ensemble smoother with multiple data assimilation (ES-MDA). First, the PGGAN was trained to an image with $128\times128$ resolution in this work. The trained PGGAN was used to generate hydraulic conductivity fields when fed an ensemble of latent variables and hard data. The ES-MDA then was used to update the latent variable with the help of hydraulic head data obtained from the groundwater model. The approach was evaluated by using a synthetic example of the groundwater flow model a reference facies model randomly cut from the training image. Results show that this approach was able to perform efficient estimation of an unknown facies model domain. The results also show that coupling of PGGAN and ES-MDA conditioned to both hard data and hydraulic head data was able to reconstruct the complex channel structures of the randomly cut facies model from the training image and reduce the uncertainty of the predictions.

Speaker: Liangping Li (South Dakota School of Mines)

10:20 Coupling reaction transport model and multiphase hydrate simulator for studying anaerobic oxidation of methane

The anaerobic oxidation of methane (AOM) occurring in the surface sediments acts as an important barrier to methane emissions, caused by the reaction between sulphate ions and dissolved methane molecules. However, the current hydrate simulators rarely consider the transport of sulphate and the subsequent AOM reaction. In this study, to investigate AOM effects in hydrate systems, a new simulator named Tough+Hydrate+AOM (THA) is developed by combining the reaction transport model with the widely-used Tough+Hydrate simulator. The THA simulator is validated using the single-phase cases of the Dvurechenskii mud volcano in Black Sea, since the results obtained are in good agreement with previous ones. The THA simulator considering AOM is expected to be an important tool for assessing methane emissions caused by hydrate destabilization.

Speaker: Haotian Liu

10:20 Digital-rock simulation of stress-dependent porosity and permeability for carbonate rocks

During fluid production or injection, the reservoir rock undergoes deformation due to the temporal variations of the effective stress field, which can alter the rock porosity and permeability, and further affect the reservoir performance. Previous digital rock models primarily emphasized the quantification of rock properties of the original core, meanwhile often neglecting the alterations of rock properties under dynamic stress. For example, the stress-dependent porosity and permeability are often ignored, leading to disparities between the actual rock measurement and the values calculated by the digital rock models. Carbonate reservoirs exhibit significant heterogeneity in pore distribution, hence it becomes imperative to conduct post-compaction simulation of the stress-dependent properties for carbonate rocks.

Based on the digital rock methodology, our study constructed digital rock models using the real data from carbonate rock CT scan. The median filtering method was employed for noise reduction. Subsequently, simulation of uniaxial compression was conducted. Firstly, the solid mechanics simulation was performed to simulate the deformation of the rock matrix within the core after compression under various stress conditions (e.g., changing the confining stress under the constant axial stress). The digital rock models after compaction were then constructed. Secondly, the separation of the rock skeleton and pores was executed for the compressed rock as shown in Fig. 1. Then, the pore mesh model was reconstructed and gridded to generate a digital model exclusively containing the pores as shown in Fig. 2. Following this, the fluid dynamics simulation was carried out to obtain the porosity and permeability data of the rock after stress-induced deformation and finally, the evolution law of rock porosity and permeability to the effective stress.

The rock strain analysis reveals that the stress-induced deformation primarily occurs within the fractures of the fractured rocks. The rock skeleton undergoes minimal changes, and the fixed constraint surface (bottom surface) remains stationary, with displacement intensifying closer to the axial compression loading surface (the top surface in Fig. 3), as the external load increases, the changes of the rock become more obvious. The stress concentration phenomenon occurs at the interface between the skeleton and pores. The closer to the pores, the more pronounced this stress concentration becomes. Specifically, at the same height, the displacement of the pores after compression is consistently the largest, and the overall deformation of the rock is more significant in the middle and smaller on both sides. In places with a high degree of tortuosity, the flow velocity is relatively small as shown in Fig. 4. Our calculation shows as the external loads increase, the porosity and permeability would decrease, showing a nearly linear decreasing trend.

In this study, we established an improved digital rock model considering the stress-dependency effect and calculated the porosity and permeability under varying stresses through the coupled simulation of fluid dynamics and solid mechanics. This provides the theoretical foundation for a more accurate description of the formation properties after fracturing. Simultaneously, it offers insights that can guide the computation of properties for other porous rocks, such as tight sandstone and shale.

Speaker: Dr Ye Tian (Southwest Petroleum University)

10:20 Effect of microfractures on apparent permeability of porous media: a Lattice Boltzmann study

Microfractures are commonly developed in natural rock cores, such as tight or shale reservoirs, which significantly influence the displacement patterns, front morphology, and residual phase saturation. Analyzing the impact of microfractures on the permeability and fluid dynamics of porous media is essential for understanding these complex physical phenomena. In this study, we first established the matrix structure of porous media using Voronoi polygons and spline interpolation. Subsequently, the Lattice Boltzmann method was employed to compare and analyze the effects of microfractures on the apparent permeability, preferential channel evolution, pressure field, and velocity field distribution in porous media. The research findings demonstrate that the spatial information of microfractures, such as fracture length, aperture, connectivity, and orientation, significantly affect the improvement of matrix permeability and the development characteristics of preferential channels in porous media. By conducting a comparative analysis, we have determined the ranking of the influence of these factors. When characterizing the relationship between porosity and permeability in fracture-porous media using the Kozeny-Carman equation, it is crucial to consider the information about microfractures for more accurate results. This study contributes to enhancing our understanding of fracture-porous media and the gas and oil supply capabilities during the single-phase flow stage in gas and oil reservoir development.

Speaker: Qingyuan Zhu (China University of Petroleum, Beijing)

10:20 Effects of porous media on flame propagation characteristics of gas explosions based on X-ray CT reconstruction and three-dimensional pore level simulations

Porous media structures can be used for the suppression of flame propagation behaviours in the blast zone. This material absorbs heat and disperses gases generated by combustion through the complex pore structure within it, thereby effectively retarding flame propagation and lowering temperatures. In this study, the effect of porous media composed of different pore densities on gas explosion flame and action is investigated through experiments and numerical simulations with three-dimensional direct pore levels. Modelled of porous media with different configurations by X-Ray Computed Tomography 3D reconstruction technique. The Flamelet Generated Manifold (FGM) and Large Eddy Simulation (LES) methods was used to simultaneously capture the complex chemical reactions, turbulence characteristics and flame fine structure during the gas explosion in the porous media region. Three-dimensional distributions of flame temperature, radical components, and reaction rates in the porous media region were obtained. The simulation outcomes employing the LES/FGM model demonstrate a strong correlation with experimental data. Furthermore, when the pore size of the porous material is less than 10 PPI, there is an increase in turbulence intensity after the flame traverses the porous medium, thereby enhancing flame propagation. As the pore space of the porous material increases incrementally, the heat dissipation through the porous region also rises, gradually shifting its role from promoting to inhibiting the flame, ultimately achieving quenching effect.

Speaker: Shoutong Diao (Chongqing University)

10:20 Elastic anisotropy and influencing factors of shale in the Wufeng-Longmaxi Formation

Abstract: The shale of the Wufeng-Longmaxi formation in the Sichuan Basin is the preferred layer for shale gas exploration in China, and its petrophysical characteristics are the key to geological and engineering dessert prediction. However, the characteristics and impact mechanisms of its acoustic wave velocity and elastic anisotropy are currently unclear. In this paper, the Wufeng-Longmaxi shale is taken as the research object, and the P-wave and S-wave velocities of the samples are tested under the loading and unloading process of confining pressure. The stress sensitivity variation of parameters such as wave velocity, wave velocity ratio, and anisotropy is discussed. P-wave and S-wave anisotropy parameters are correlated under different pressure conditions. X-ray diffraction, casting thin sections, scanning electron microscopy, micron CT scanning, and other analytical techniques are used to explore the mechanism of stress sensitivity of elastic parameters. The research results indicate that: (1) the acoustic velocities of samples from different angles are V90°>V45°>V0°, and there is a positive correlation between the wave velocity and the confining pressure. After unloading the confining pressure, irreversible plastic deformation occurs due to the closure of some micro-fractures in the rock core, causing the wave velocity to be higher than the initial value. (2) The stress sensitivity coefficient of the P-wave (The mean is 3.00m•s-1•MPa-1) is higher than that of the S-wave(The mean is 1.23m•s-1•MPa-1), and the stress sensitivity coefficient of the compacted stage(The mean is 3.02m•s-1•MPa-1) is higher than that of the elastic stage(The mean is 1.21m•s-1•MPa-1). (3) The anisotropy of P-wave and S-wave is negatively correlated with confining pressure. When the confining pressure is loaded to 65MPa, the change rate of P-wave anisotropy coefficient is 23%, and its stress sensitivity is higher than that of S-wave anisotropy coefficient (the change rate is 13.7%). After the unloading of confining pressure, the degree of anisotropy is reduced due to the closure of some micro-fractures. The empirical formula of P-wave and S-wave anisotropy parameters under different pressures is established by linear regression, which can provide a reference for the mutual prediction. (4) The variation of wave velocity anisotropy with stress can be divided into stress and material anisotropy, which are related to the directional arrangement of micro-fractures and clay minerals, respectively. The quantitative characterization of shale anisotropy can be realized by evaluating the development degree of reservoir fractures and mineral components and provides a reference for logging interpretation, dessert prediction, and fracturing construction of shale gas reservoirs.

Speaker: Feng yutian (西南石油大学)

10:20 Emulsification, Accumulation and Coalescence of Oil Droplet during Chemical Flooding

Chemical flooding is an important way to enhance oil recovery, and good oil recovery is usually accompanied by excellent emulsification. To clarify the of chemical emulsification process and the effect of accumulation and coalescence of O/W emulsions on chemical flooding. In this study, the process of emulsifying oil with chemical agents was analyzed from the aspects such as interfacial tension (IFT), micro-emulsification state and droplet size distribution. Furthermore, the accumulation and coalescence mechanism of O/W emulsions were analyzed based on the results of multiple light scattering tests. Finally, the stages of emulsification, accumulation and coalescence of O/W emulsion were determined by chemical flooding experiments under reservoir and injection parameters. At the same time, the influence of chemical flooding dynamics on oil recovery were analyzed. The results show that the higher the adsorption density of chemical agents on the oil-water interface, the better the reduction of the IFT. At the same time, the smaller the droplet size of O/W emulsion, the higher the proportion of the peak droplet size. It can be seen from the oil-water interface evolution process and the microscopic migration characteristics of the O/W emulsion that the coalescence process of the emulsion depends on the difficulty of the interface fusion and the speed. The properties of the emulsion interface depend on the adsorption density, adsorption form and properties of the chemical agent on the oil-water interface film. During chemical flooding, the oil state change always undergoes through five processes: preliminary emulsification, stable emulsification, droplet accumulation, droplet coalescence, oil retention & adhesion. The emulsification ability of chemical agent can be enhanced by increasing concentration or injection pressure during chemical flooding. Low reservoir permeability, long flow distance, high injection speed and suitable injection method can increase the injection pressure. At the same time, higher injection pressure can also improve the stability of O/W emulsions, so that the accumulation and coalescence process would postpone. In the process of chemical flooding in oilfield, the following aspects should be addressed to improve the oil recovery: (1) Increase the amount of O/W emulsion oil in the preliminary and stable emulsification process. (2) Reduce the droplet size of the formed O/W emulsion. (3) Prolong the stability of O/W emulsion. To achieve the above goals, new chemical agents can be developed, and the injection method can be adjusted appropriately. The results provide sufficient theoretical support for the chemical flooding and provide guidance for chemical agent screening/synthesis and injection process design.

Speaker: Jianbin Liu (Xi'an Shiyou University)

10:20 Enhancing CO2 foam performance with micrometer-sized particles and studying their transport behavior in rock pore spaces

The current heavy reliance of the global energy system on fossil fuels has led to persistently high levels of CO2 emissions. As one of the major greenhouse gases, CO2 contributes to global warming. Carbon capture, utilization, and storage (CCUS) is considered an effective method for reducing greenhouse gases in the atmosphere.
Compared to direct CO2 injection, CO2 foam has been found to be more effective for enhanced oil recovery and CO2 storage. Many studies have shown that nanoparticles can strengthen foam and significantly enhance its performance. However, the high cost of nanoparticles has hindered their large-scale application. As a response, this research focuses on testing industrial-grade fine cement, fly ash, and bentonite, studying the combinations of high-performance surfactants with these particles to understand their foam stability and interfacial mechanical properties. Through core flooding experiments, we explore the optimal systems for plugging and oil displacement, as well as the transport behavior of micrometer-sized particles. The experiments conducted thus far have revealed that the median particle size of these particles ranges from 1000-1800nm. The self-developed high-performance surfactants, when combined with selected particles, have shown a meaningful enhancement effect only at concentrations above 2wt%. At a particle concentration of 4wt%, the surfactant demonstrated a performance of over five times that of the surfactant alone, similar to the performance of around 1wt% nanoparticles, but with a simpler configuration process and the use of safer reagents.
This research contributes to the understanding of transport behavior of new foam systems in rock pore spaces and the principles of gas storage. Investigating the plugging effect of micrometer-sized particles on rock cores is equally significant.

Speaker: Kai Xiao (China University of Petroleum (Beijing))

10:20 Evaluation of the void space structure and flow channels in low-permeability reservoir rocks

In recent years, the share of unconventional reserves in global oil production has been growing that leads to the development of efficient methods in exploration and development of tight reservoirs. The key features of low-porosity and low-permeability reservoirs are the high heterogeneity of the void space, the ultra-low rock permeability due to the nanoscale pores, and the presence of clays or solid insoluble organic compounds.
At the present stage of the experimental petrophysics, there is no standardized set of laboratory-based techniques for assessing the porosity, permeability and water saturation of such rocks. Thin layering, lenticularity, unpredictable changes in lithological characteristics (for example, heterogeneous clay distribution and carbonatization), reservoir properties and oil saturation of tight rocks create uncertainty in the petrophysical model, which, in turn, does not enable the accurate assessment of producible oil volumes.
Study of the composition (mineral, elemental and fractional) and structure of the void space can help to reduce this uncertainty in further modeling. The microstructure of the rock is determined by the geometry of the fluid flow channels, the size of these channels and their distribution. In other words, the characteristics of the reservoir properties of the tight rocks are always related to the parameters of the void space structure. Understanding of the void space structure can be obtained from theoretical calculations of various pore-pore connection models and from experimental works using direct and indirect laboratory methods. In this work, to examine and visualize the structure of the void space of low-permeability rocks, a set of modern techniques and equipment including gas porosimetry, computed microtomography (microCT), mercury porosimetry (MICP), nuclear magnetic resonance (NMR) and low-temperature adsorption / BET was used. Reservoir properties were determined for the rock collection of 45 core plugs and duplicate core samples. Additional tests include the X-ray diffraction analysis for determining the mineral composition and petrographic analysis of thin sections.
Results include the comparison of reservoir properties (porosity, permeability and pore size) determined by different techniques and discussion on advantages and limitations of each method for target low-permeability sandstone reservoir. The structure of the void space was characterized by pore size and pore throat distributions:the pore throats varies from 0.001 to 0.3 μm, the sizes of the pores ranged from 0.01 to 10 μm. The porosity of rock the collection varied from 6 to 14%, gas permeability did not exceed 0.2 mD. The contribution of the clay components and heavy hydrocarbons to the total porosity of samples in some intervals was demonstrated by results of NMR, microCT and MICP. Pore size distributions for the same samples by different methods were plotted jointly to illustrate the limitations of MICP, NMR thin section analysis and microCT at two resolutions. In conclusion, it is demonstrated how the reservoir properties and the void space (pores and pore throats) should be analyzed based on the results of both routine (gas porosimetry, liquid saturation, centrifuging, thin sections) and high-precision methods (NMR, microCT, low-temperature adsorption, etc.).

Speaker: Aliya Mukhametdinova (Labadvance LLC; Skolkovo Institute of Science and Technology)

10:20 Experimental Study, Model Characterization and Application of Anisotropic Water Drive Oil Relative Permeability Curve

The water-oil relative permeability is the key parameter of reservoir numerical simulation. Traditionally, the core plunger of parallel formation is used to carry out the water displacement oil experiment and calculate the normalized relative permeability cure. But the reservoir has strong anisotropy, and single relative permeability curve masks the anisotropy of the actual reservoir, so it is necessary to establish a new method for testing and characterizing the water-oil relative permeability curve and apply it in the numerical simulation.
In this paper, a method for testing, characterizing and numerical modeling the relative permeability curve of anisotropic water drive oil is proposed, and it applied to the analysis of offshore fluvial facies oil fields. The distribution of residual oil is highly matched with the logging interpretation results.
1. The representative cube core is intercepted by the wire cutting technology, and the cube holder is introduced to carry out the water displacement oil experiment in the three directions, and calculate the relative permeability curve of displacement in each direction (Fig. 1).
2. Based on mineral inversion, a two-dimensional digital core of fluvial facies reservoir is established, and water displacement oil simulation experiment is carried out when the water flooding direction and bedding direction are at different dip anglesto determine the characteristics of anisotropic relative permeability curves of different sedimentary facies (Fig. 2) .
3. In the mathematical model, different groups of anisotropic phase permeability curves are called for calculation in sedimentary facies different zones, and each group contains three water-oil relative permeability curves with different displacement directions.
The research shows that the angle between the water drive direction and the bedding affects the microscopic sweep coefficient, resulting in the different oil displacement efficiency of the phase permeability curves in different directions. The Z direction phase permeability curve has the highest oil displacement efficiency, and the X and Y directions are lower; The difference of displacement efficiency between the X and Y directions of the phase permeability curves in the high angle oblique bedding reservoirs is large, but the difference between the X and Y directions of the phase permeability curves in the parallel bedding reservoirs is small; After considering the anisotropic water-oil relative permeability curve, the vertical and horizontal differences of remaining oil are more obvious. For the numerical simulation of the actual oilfield, through the comparison of logging interpretation of 25 passing wells, it is confirmed that the residual oil saturation after the application of this method is more consistent with the logging interpretation results.
The innovation of this paper is to propose a method for testing and characterizing the relative permeability curve of anisotropic reservoir and its application in numerical simulation.

Speaker: Yifan He (CNOOC)

10:20 Feasibility Study on Alkali-Surfactant-Polymer Alternating Gas Injection to Enhance Oilfield Recovery

Currently, most oil fields have entered the high-water-cut development stage, and traditional water flooding yields low recovery rates, leaving a significant amount of residual oil unexploited. Water Alternating Gas (WAG) injection has improved the effectiveness of CO2 flooding, leading to an increase in recovery by approximately 10-15%. However, WAG still faces challenges such as uneven gas distribution, gravity effects, and decreased oil relative permeability.
This paper proposes a method called Alternating Surfactant-Polymer-Alkali and CO2 Gas Injection (ASPAG) to address the aforementioned issues. The approach involves alternately injecting a solution of polymer-surfactant-alkali (ASP) and carbon dioxide (CO2) during core displacement experiments to enhance the efficiency of Water Alternating Gas (WAG) injection. The uniqueness of this method lies in the miscibility of CO2 with the oil phase, the ability of surfactants to reduce oil-water interfacial tension, and the assistance of polymers in adjusting the reservoir profile.Currently, research on ASPAG is limited, and the following questions remain unanswered: (1) Can the ASPAG method increase recovery rates? (2) What are the main mechanisms by which ASPAG technology enhances recovery?
This study conducted five sets of core displacement experiments, comparing and analyzing the displacement effects of water flooding, Water Alternating Gas (WAG), Polymer Alternating Gas (PAG), as well as Polymer-Surfactant-Alkali (ASP) and Polymer-Surfactant-Alkali Alternating Gas (ASPAG). The analysis considered various alternating cycles, slug sizes, and injection rates. Simultaneously, the study delved into the mechanisms behind ASPAG's enhanced oil recovery. The research also explored the feasibility of ASPAG in reservoirs with different average permeabilities, heterogeneities, and fluid compositions. The results demonstrate that: (1) Compared to traditional WAG, PAG, and ASP methods, ASPAG effectively increases oil recovery rates; (2) The primary displacement mechanism of ASPAG lies in the ability of the ASP composite agent to reduce interfacial tension and improve the mobility ratio of oil and water.
This study aims to provide a comprehensive understanding of the mechanisms behind polymer-surfactant-alkali-alternating gas (ASPAG) enhanced oil recovery. It introduces a novel technology applicable to medium to high permeability reservoirs, with the potential for achieving higher recovery rates.

Speaker: shide Yan (Xi’an Shiyou University)

10:20 Feature alignment Generative Adversarial Network for Multi-scale fusion reconstruction of Core Images

The accurate modeling of the three-dimensional structure of porous media is important for the study of the linkage between the microscopic characteristics and the macroscopic physical properties/phenomena. Multi-scale pore structures are widely distributed in nature and industry. However, due to the tradeoff between field of view (FOV) and resolution, it is difficult to obtain high-resolution images with a large field of view in a single imaging process. High-resolution images with small field of view can capture more detailed features, but lack representation of the entire microstructure. Low-resolution structures with a large field of view are more representative, but lack detailed features. Multi-scale fusion reconstruction is an effective way to model large-view and high-resolution structures. Previous studies have shown that the method based on deep learning in particular has great potential in multi-scale reconstruction. In this paper, we propose a feature alignment Generative Adversarial Network (FAGAN) to achieve multi-scale fusion modeling of digital core images, which combines 2D small-FOV high-resolution images (2D HRI) and 3D large-FOV low-resolution images (3D LRI). There are dimensional differences between 2D image features and 3D image features, and 3D feature space can represent 3D spatial structure more accurately. Therefore, the generator of FAGAN uses a two-stream network to extract the semantic features of 3D LRI and 2D HRI respectively. A feature reconstruction module is designed to convert 2D image feature $F_{2D}$ into 3D feature representation $F_{(2D\sim 3D)}$, so as to realize the feature fusion of 2D HRI and 3D LRI in 3D feature space. The semantic consistency of $F_{2D}$ and $F_{(2D\sim 3D)}$ is constrained by combining the feature space alignment loss function (FSAloss). In addition, a feature alignment module is designed to align $F_{(2D\sim 3D)}$ with 3D LRI semantic feature $F_{3D}$ to ensure the correct fusion of features. The visualization results show that the structure generated by the model follows both the spatial geometry of 3D LRI and the fine details of 2D HRI. The validity of the reconstructed results is further verified by the statistical parameters (two-point correlation function, pore diameter distribution, shape factor distribution, etc.) and numerical analysis (permeability, etc.) of the reconstruction structure and the real structure.

Speaker: Pengcheng Yan

10:20 Gas-liquid equilibrium of CO2-SF6- ionic liquid system in porous media under geological storage

Sulfur hexafluoride is often used as a gas tracer to detect the distribution of carbon dioxide in deep saline water geological storage. The study on the gas-liquid equilibrium of CO2-SF6- ionic liquid system under geological storage is of great significance for the analysis of the feasibility and development of co-injection of SF6 and CO2. In order to find reliable data on the phase equilibrium of carbon dioxide and sulfur hexafluoride mixture in pure water and brine, In this study, the confocal Raman quantitative observation technique was used to monitor the change and distribution of substance content in each phase at phase equilibrium in different pores in the pressure range of (5~15) MPa, the temperature range of (274.5~298.5)K and the salt molar concentration range of (1.041~4.278)mol·kg−1. The phase equilibrium data of CO2-SF6-H2O-{NaCl or CaCl2 or MgCl2} system in the gas phase and the liquid phase were obtained. Then, the electrolyte−Cubic Plus Association (electrolyte−Cubic Plus Association) equation of state was used to successfully model the gas-liquid equilibrium data, re-fit the binary interaction coefficients between the components, and improve the calculation method of fugacity coefficient, which improved the performance of the model.

Speaker: Shuai Zhang (Dalian University of Technology)

10:20 Investigation of the impact of natural and hydraulic fractures on fluid flow in weakly cemented hydrate formation

We present a comprehensive experimental and numerical study examining the influence of natural and hydraulic fractures on fluid flow within weakly cemented hydrate formations. A unique sample preparation methodology was initially devised to accurately reflect the petrophysical and mechanical parameters of the hydrate formation found in the ShenHu area of the South China Sea. The typical rock particle size was approximately 48μm, with over 60% of the particles composed of kaolinite and illite, exhibiting a hardness of approximately 1.5 on Mohs' scale.

The experiment, involving the formation and decomposition of gas hydrates, was conducted within a triaxial pressure cell on a core flooding rig. The nuclear magnetic resonance (NMR) imaging technique was employed to detect changes in water saturation and pore structure. The sample was subjected to a confining pressure of 15MPa in both radial and axial directions, while fluid pressure was maintained at 12MPa. Subsequent to the formation of the gas hydrate, depressurization was initiated by maintaining the outlet pressure at 8MPa. The emergence of fractures was detected using NMR imaging (in Fig. 1) following the completion of the depressurization process.

The permeability of the rock was measured before and after depressurization, revealing a tenfold decrease from 75 mD to 7.1 mD. Analysis of pore distribution indicated a reduction in the number of pores with a radius of 1.25 μm and an increase in those with a radius of 0.126 μm, signifying that the pore radius of the formed fractures was considerably smaller than the original value (in Fig. 2). The empirical formula relating particle size to permeability suggested that particle size at the fractures was also smaller than the original size. This outcome can be predicted using Cooke's model, which accounts for the compaction of kaolinite and illite. The findings demonstrate that hydrate decomposition caused axial stress changes in the rock, leading to fractures where detached kaolinite and illite particles were compacted, ultimately forming low-permeability fractures in the weakly cemented sample.

To investigate the conductivity of hydraulic fractures, a Brazilian test machine was employed to create fractures along the axial direction of the sample. Permeability measurements were conducted on both fractured samples without proppants and fractured samples with varying proppant concentrations using the same experimental setup under different confining pressures and injection rates. The results indicated that the permeability of the fractured sample without proppants was 50% of the original value at an effective stress of 8 MPa, due to the compaction of clay minerals. The introduction of proppants (1.6 kg/m³) significantly increased permeability from 74 mD to 381 mD, despite embedment issues identified by NMR pore size distribution and fracture surface imaging (in Fig. 3).

Utilizing the experimental fracture conductivity data, we conducted field-scale simulations, taking into account natural and hydraulic fractures with varying fracture conductivity and length. The simulations demonstrated that hydraulic fractures considerably enhanced gas production with optimal length and should be considered as a well stimulation method for weakly cemented hydrate formations.

Speaker: Dr Ben Niu (1.China National Petroleum Corporation Offshore Engineering Company Limited)

10:20 Mass transfer across fracture-matrix interface in a flowing fracture

Mass transfer across fracture-matrix interface in a flowing fracture
Mohsen Farhadzadeh, Hamid M. Nick

A direct numerical simulation of the Navier–Stokes equations is utilized to solve two-phase flow in simple fractured porous media [1]. We focus on understanding the impact of fracture flow on the mass transfer between the fracture and porous matrix utilizing a two-dimensional geometry consisting of a single fracture with a limited number of pores.
We illustrate different imbibition regimes during water injection through the fracture into the porous domain saturated with oil. The impacts of contact angle, viscosity ratio, and interfacial tension for variable injection rate on the mass transfer across the fracture-matrix interface are analyzed. The simulation results suggest the fracture flow rate controls the rate of fluid phase transfer between the fracture and matrix domains.

Reference:
Farhadzadeh, M., & Nick, H. M. (2023). The critical role of fracture flow on two-phase matrix–fracture transfer mechanisms. Advances in Water Resources

Speaker: Mr Mohsen Farhadzadeh (Danish Offshore Technology Centre, Technical University of Denmark, Copenhagen, Denmark)

10:20 Mechanism and Control Factors of Particle Migration in Loose Sandstone Reservoirs

Particle migration and plugging are ubiquitous throughout the entire lifecycle of unconsolidated sandstone reservoir development. During the extraction process, particle migration and plugging alter the microscopic characteristics of the reservoir, while the microscopic parameters of the reservoir control particle transport and plugging. This paper utilizes methods such as CFD-DEM, visualization of laser-etched pore structure models, dynamic core displacement, and thin-section casting to systematically discuss the coupled relationship between the microscopic characteristics of unconsolidated sandstone reservoirs and particle migration. This includes the impact of particle size, concentration, particle/pore throat ratio, pressure drop. Based on particle transport/plugging in different types of pore structure models. The achievements and understanding are as follows: Based on particle size, reservoir particles are categorized into seepage sand (<4μm), formation particles (4~32μm), and framework particles (>32μm). When particle volume concentration is >1%, particles are more likely to be retained on the pore surface and in the throat. When the particle size/throat is less than 1/14, the migration of permeable sand has almost no effect on the permeability of the reservoir. When the particle size/throat is less than 1/7, particles will aggregate and settle in the pores. When the particle size/throat is less than 1/7, particles will disperse and settle in the pores. When the particle size/throat is greater than 1/3, particles will bridge and block the throat in the form of single double particles or multiple particles. This study proposed that the migration/blockage of particles in reservoirs has periodicity, stages, and persistence. This paper evaluated the differences in particle migration and blockage in different types of reservoirs, and established a coupling relationship between the permeability damage rate of particle migration and the microscopic characteristic parameters of the reservoir. And established three mechanisms and six modes of particle and blockage in loose sandstone.

Speaker: haoxuan tang (National Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu, China.)

10:20 Mechanisms of CO2 huff and puff enhanced oil recovery and sequestration within shale nanopores

The increasing global climate change phenomenon is aggravated by the emissions of substantial amounts of greenhouse gases, including carbon dioxide (CO2). Capturing and safely storing CO2 in shale reservoirs not only offers a critical means to attain carbon neutrality objectives but also bolsters shale oil recovery. However, conventional core experiments encounter difficulties in uncovering the complex intermolecular interaction mechanisms during CO2 adsorption processes in shale formations, primarily due to the confinement effect. Molecular dynamics simulation methods show great potential as a valuable complement to core experiments for elucidating these mechanisms. We have developed a model that considers the multi-component characteristics of shale oil, such as methane, n-octane, and asphalt, for CO2 huff and puff in calcite pores. The analysis encompasses a wide range of parameters, including density distribution, molecular number variations, diffusion coefficients, and intermolecular interactions of each component. Our key objective is to unravel the underlying mechanisms of CO2 sequestration and its potential to boost shale oil recovery through huff-n-puff injection techniques. Additionally, we examine the impacts of shale oil components, CO2 injection pressure, and crude oil extraction pressure. During the injection stage, CO2 molecules penetrate the pore through diffusion. In the subsequent soaking stage, the robust interaction between CO2 molecules and the pore walls triggers the release of hydrocarbon molecules from their adsorption sites on the calcite surfaces. This detachment process is facilitated by competitive adsorption mechanisms, thereby facilitating the sequestration of CO2. In the production stage, hydrocarbon molecules are displaced and extracted, while approximately 14% of CO2 molecules are sequestered within the pores. Notably, methane and n-octane, known for their exceptional diffusivity, are extracted in significant quantities. However, due to the alluring interactions between asphalt molecules and the pore walls, coupled with the pronounced self-attraction among adjacent asphalt molecules, the recovery of asphalt is minimal, and instead, it gradually undergoes contraction. Increasing the CO2 injection pressure, reducing the oil production pressure, and enlarging the pore size all contribute to the improved CO2 displacement effect. The crucial mechanism for enhancing shale oil recovery is the ability of CO2 molecules to infiltrate pores with diameters that are larger than that of CO2 molecules. During this process, CO2 molecules engage in interactions with crude oil, leading to a decrease in interfacial tension and viscosity, along with the extraction of lighter components. Consequently, the combined effects of CO2 diffusion, dissolution, and competitive adsorption work synergistically to augment the recovery of shale oil. This study establishes a solid theoretical foundation for the optimal exploitation of shale oil resources and the efficient implementation of CO2 huff and puff technology to enable effective carbon sequestration in shale formations.

Speaker: Ms Mengqi Zhang (China University of Petroleum (East China))

10:20 Molecular Dynamics Study of the Impact of Surfactants on CO2-Enhanced Oil Recovery Efficiency.

CO2 enhanced oil recovery (EOR) stands as a well-established method for augmenting reservoir oil recovery, concurrently mitigating environmental pollution and expediting the efficient development of gas reservoirs. This technique assumes pivotal importance in the sustainable and eco-friendly advancement of energy resources. In practical applications, the oil recovery efficiency achieved through CO2 miscible flooding surpasses significantly that of immiscible flooding. The Minimum Miscibility Pressure (MMP) emerges as a critical parameter in the miscible flooding process. Presently, the application of surfactants to diminish the Minimum Miscibility Pressure (MMP) in reservoirs proves to be an effective strategy for reducing the miscibility pressure during CO2 flooding. The selection of a surfactant that can efficiently enhance oil and gas miscibility while remaining environmentally friendly is paramount. This study delves into the phase interface changes during the CO2 and crude oil miscibility process, shedding light on the micro-mechanisms of surfactant-assisted miscibility and scrutinizing its impact on recovery efficiency. Employing molecular dynamics simulations, this paper compares the instantaneous structural diagrams and density distributions of two systems before and after the addition of surfactants. The study elucidates the surfactant-induced reduction in minimum miscibility pressure at a microscopic level. Building on this foundation, CO2 displacement and CO2/surfactant composite displacement systems are established to explore the microscopic dynamics and evaluate surfactant impact on displacement efficiency. Research findings suggest that surfactants enhance interaction forces between CO2 and crude oil, thereby increasing CO2 solubility in oil. Consequently, this leads to a reduction in the minimum miscibility pressure, significantly improving oil reservoir recovery. The research uncovers molecular-level interface changes between CO2 and crude oil during miscibility, revealing the microscopic role of surfactants in CO2-enhanced oil recovery. These discoveries provide theoretical underpinnings for advancing techniques aimed at enhancing reservoir recovery.
Keywords: CO2 flooding, surfactant, minimum miscibility pressure, molecular dynamics, displacement efficiency.

Speaker: 彤 侯 (西安石油大学)

10:20 Multi-scale characterization for pore systems of hydrate-bearing reservoir ——Kerishna-Godavari Basin, India

The microscopic pore system of hydrate-bearing sediments in the KG Basin was thoroughly described using X-ray computed tomography (XCT), low-field nuclear magnetic resonance (NMR), and N2 gas adsorption (N2GA) technique. Results indicate that the pore types are intricate, exhibiting a wide range of pore shape and limited connectivity. Foraminiferal shells contribute to the presence of certain pores, whereas micropores ranging from 4-20μm play a significant role in determining permeability. The absence of measuring closed pores with N2GA resulted in a notable disparity in the overall pore volume when compared to NMR findings.
NMR technique is used to monitor the phase transition process in pores as the temperature changes. The intensity value of the first peak signal of CPMG is measured, and the pure water signal is used as a reference to compute the amount of unfrozen water and the distribution of pore sizes. It is found that the water signal within the macropores is consistently rising, although it is considerably weaker compared to the micropores. The peak values in the mesopores, which belong to the medium range, are disordered. Analysis indicates that water migration takes place within the mesopores. The initial process of ice melting into water occurs within smaller holes.

Speaker: Ms 文 管 (Peking University)

10:20 Multicomponent fluid adsorption behavior in nanopores with CO2 injection: A molecular dynamics simulation

The application of CO2 to enhance shale oil recovery has a huge potential and thus gained widespread popularity. However, the microscopic mechanisms of CO2 to enhance shale oil recovery remain unclear. In this paper, the molecular dynamics (MD) simulation method was adopted to investigate the replacement behavior of CO2 in shale oil reservoirs from a micro perspective. Three kinds of n-alkanes, namely nC7, nC18 and nC25 were selected as the simulative crude oil in the silica nano pores. The MD models were established to study the occurrent patterns of different alkanes on rock surface and the alkanes-stripping characteristics of CO2. The fluid (CO2 and alkanes) density, mean square displacement (MSD) and centroid variation were evaluated to reveal the effect of CO2 on alkanes. The results indicate that different alkanes exhibit distinct occurrence characteristics of oil film on the rock surface of the shale reservoir. A bigger carbon number leads to a thicker oil film. Through the alkane molecular gaps, CO2 penetrates the alkane molecular system and reaches the rock surface to achieve an effective stripping of the oil film of different alkane molecules. CO2 is much easier to mix with the stripped oil molecules and push them out away from the rock surface as the carbon number is small. The process for CO2 replacing crude oil on rock surface can be divided into four typical stages, namely CO2 diffusion, competitive adsorption, emulsification and dissolution, and CO2-alkanes miscible phase (for light alkanes). The study contributes to the improvement of micro EOR mechanisms for shale oil developed by CO2 and provides a guidance for the application of CO2 to enhance shale oil recovery.

Speaker: Zhengbin Wu (China University of Geosciences (Wuhan))

10:20 New Understanding, Technology Progress and Prospect of Development of Sinian Large Carbonate Gas Reservoir in Central Sichuan

Dengying Formation gas reservoir of Sinian system in Central Sichuan is a large karst weathering crust type carbonate gas reservoir and its declared proved, probable and possible reserve is 1.13×1012m3. The gas reservoir is characterized by low porosity and low permeability. The reservoir space is mainly small-scale fractures and vugs, with strong heterogeneity of the reservoir. The development of gas reservoir faces many difficulties such as reservoir fine characterization, scientific well location deployment and high efficiency development. Starting from the reservoir genetic mechanism, using the research means of geological engineering integration, some new perspectives which were useful to understand the gas reservoirs have been proposed, and several key technologies for efficient development of gas reservoirs have been developed. The new perspectives include the following three points. Based on the karst characteristics, the differential control mechanism of superimposed karst was put forward to clarify the reservoir development characteristics. Starting from the genetic mechanism, the control mechanism of dissolution facies to the reservoir quality was advanced to characterize the reservoir heterogeneity. According to the characteristics of gas reservoir, the development model of stacking single well indicators to expound and prove gas reservoir scale was proposed, which has played a significant role in guiding the scale construction of gas reservoirs. The key technologies include the following three aspects. The paleo geomorphic restoration and quantitative characterization method of double interface was innovated to guide the selection of development areas on the plane. The proportion of classⅠand classⅡwells was increased from 40% in the evaluation period to 100% in the construction period. The small-scale fracture hole identification and characterization technology was created to guide the drilling trajectory design. The proportion of testing production of one million m3 gas wells was increased from 41.6% in the evaluation period to 60% in the construction period. The segmented acid fracturing process technology was improved to efficiently use high-quality reservoirs and to liberate low-quality reservoir. The reservoir permeability was increased from 0.62mD before to 6.77mD after acid fracturing. During the “14th five-year plan” period, the development prospect of Sinian gas reservoir in Central Sichuan is broad. Anyue gas area is changing from efficient development of the fourth member of Dengying Formation on the platform edge to long-term stable production and the benefit development of multi-layer within the platform. Penglai gas area is changing from single well high-yield to block high-yield and gas reservoir scale construction and production. It is expected to achieve the production target of more than 12 billion m3 to support the Southwest Oil and Gas Field Company of Petrochina to achieve the production target of 50 billion m3 by 2025.

Speaker: Haijun Yan (Research Institute of Petroleum Exploration Development)

10:20 Numerical simulation method considering solid sulfur deposition

Abstract：During the development process of high-sulfur gas reservoirs, sulfur deposition occurs, which leads to formation damage and reduces the productivity of the gas wells. The current mainstream sulfur deposition prediction models are mainly based on the Robert model or particle transport model to simulate solid sulfur deposition. The various assumptions proposed by the above models ignore the sulfur-carrying effect of sour gas and the particle deposition environment in porous media. This paper simulates the deposition process of solid sulfur particles under the influence of airflow to address the above issues. Based on numerical and core experimental data, the deposition rate of sulfur particles and the damage coefficient in the sulfur damage model are determined, and a gas- water-solid three-phase mathematical model is established that comprehensively considers sulfur- carrying and deposition damage. We apply this model to compare the actual production and pressure of gas wells with obvious sulfur deposition phenomenon in Dawan, and the results show that the model can accurately reflect the status of fluid mechanics in porous media during the sulfur deposition process. Furthermore, through numerical simulation experiments, it is found that suspended sulfur has a relatively low content in the reservoir and mainly accumulates in and near the wellbore. The deposition range of sedimentary sulfur is larger than that of suspended sulfur, mainly concentrated in the reservoir around the wellbore, and there is also deposition in areas far away from the wellbore. The further away the distance is, the less sediment will be deposited. In addition, there is a critical gas production rate, and when the gas production rate reaches 200000 cubic meters per day, the formation damage generated in the wellbore or near the wellbore is relatively close.

Keywords：Sour gas reservoir，Solid sulfur deposit，Particle migration，Reservoir numerical simulation

Speaker: Mr Lidong Mi (Sinopec Research Institute of Exploration and Development)

10:20 Numerical simulation of low-viscosity fluid proppant transport based on high-order WENO method

Hydraulic fracturing technology is one of the key technologies to increase production in low permeability reservoirs. Proppant transport and distribution in fractures are very important to maintain the high conductivity of fractures. However, it is still a major challenge to simulate the distribution of proppants in hydraulic fractures at the reservoir scale. In this paper, a proppant transport model that can be combined with reservoir scale fracturing simulator is constructed. Proppant settlement function and proppant erosion function are introduced to characterize the state of proppant in fractures. At the same time, the solution of proppant conservation equation is improved in this paper, and a non-oscillatory numerical scheme (high-order WENO method) is introduced, which can prevent the numerical oscillation and diffusion at the proppant concentration front and improve the accuracy of model solution. The model is verified in two parts. One is the verification of the proppant concentration model. The proposed method is compared with the finite element method (COMSOL) and the explicit finite difference method (EFDM). The model has higher accuracy when solving the proppant concentration front. The second is to compare with the existing proppant settlement experiment. Under the same parameters, the similarity between the model results and the experimental results is 85%, which meets the engineering requirements. At the same time, a basic case is established to analyze proppant settlement at different time. From the results, the proppant settlement process can be divided into three stages, uniform settlement period, slow settlement period and equilibrium period. Finally, four cases were established to analyze the effects of fluid injection rate, initial proppant concentration, proppant diameter and fluid viscosity on proppant settlement. It is found that the injection rate and fluid viscosity are negatively correlated with the height of the proppant layer, and the high injection rate and high viscosity fluid are helpful to form a uniform height of proppant layer. The increase of proppant diameter can greatly increase the height of proppant layer and reduce the length of proppant layer. The influence of initial proppant concentration on proppant settlement is more complicated. Low concentration of proppant and high concentration of proppant are not conducive to increasing the height of proppant layer. However, this paper considers the proppant transport of low viscosity Newtonian fluid, and the transport mechanism of non-Newtonian fluid needs further study and fully understanding.

Speaker: Prof. Guanglong Sheng (yangtze university)

10:20 Numerical simulation on the four-dimensional in-situ stress evolution in shale gas reservoirs under water injection

The rapid decline in production from shale gas wells necessitates the implementation of infill drilling and refracturing technologies to effectively utilize the remaining reserves. These techniques are crucial for maintaining long-term stability and increasing production in gas fields. As reservoir depletion occurs and water injection is implemented, geo-mechanical parameters such as reservoir pressure and in-situ stress undergo changes. These changes lead to distinct fracture propagation behaviors between old wells and those that are newly infilled or refractured, significantly impacting the strategies for future infill well deployment and refracturing operations. To predict the geometry of fractures in refractured and infilled wells with precision, an in-situ stress evolution model for the entire cycle from hydraulic fracturing to reservoir depletion in shale gas horizontal wells was established. This model utilizes water injection methods to simulate the injection of fracturing fluid and adjusts the stress-sensitive curves of fractures and matrix to match the fracturing operation pressure. It also reconstructs the pore pressure and saturation distribution field post-fracturing, facilitating further dynamic simulation of post-fracturing production and enabling a comprehensive depiction of the impact of in-situ stress throughout the entire fracturing and production process.
Research results indicate that the injection of fracturing fluid significantly affects the pressure and stress variations both inside and outside the fractures, with different patterns of stress changes. The differential horizontal stress increases inside the fracture, with the maximum increase occurring at the fracture tips, and decreases along the sides of the fracture, returning to the initial value as the distance from the fracture increases. If the injection of fracturing fluid is not considered, the differential horizontal stress decreases both inside and on the sides of the fracture, with a slight increase at the fracture tips. Under both scenarios, the stress changes during reservoir depletion also differ: overall, the principal horizontal stress decreases, with the minimum horizontal stress differential occurring inside the fracture. Moving towards the sides, the horizontal stress differential gradually increases and then decreases, approaching the initial value. When considering the injection of fracturing fluid, the changes in stress magnitude are relatively smaller, and the deflection angle of stress direction is correspondingly smaller. Pre-fracture water injection can significantly restore the pressure and stress state of the depleted zone, but an increase in injection volume does not necessarily enhance the fracturing modification effect. Optimizing the injection volume and the well soaking time before fracturing are key to improving fracturing efficiency.
By utilizing a four-dimensional in-situ stress evolution numerical simulation method that takes into account the entire cycle of fracturing production in shale reservoir horizontal wells, it is possible to elucidates the effects of initial fracturing, subsequent production, and water injection on reservoir in-situ stress. It offers crucial guidance for the design of refracturing in horizontal shale gas wells and strategic infill well placement.

Speaker: Dr Qi Ruan (Southwest Petroleum University)

10:20 Oil Well Production Forecasting Method Based on Variational Mode Decomposition and Combined Long Short-Term Neural Network Model

Accurate oil well production prediction is crucial for production planning and resource optimization. Traditional forecasting methods fail to consider the impact of noises such as manual operations on the data. These factors lead to random fluctuations in the data, thereby interfering with the true production signals and further affecting the accuracy of the prediction model. This study successfully proposes a model that integrates Variational Mode Decomposition (VMD) and Long Short-Term Memory (LSTM). Using VMD, complex oil well production data can be decomposed into multiple intrinsic mode functions, capturing information at different time scales and significantly reducing the interference of artificial noise, providing high-quality feature inputs for deep learning networks. The Sparrow Search Algorithm (SSA) is used to optimize VMD, obtaining an optimal set of intrinsic mode functions. These functions effectively capture the main patterns and trends in the data, eliminate the impact of artificial noise, and use this result as the feature input for LSTM, thus fully utilizing the advantages of VMD and LSTM and achieving information fusion and learning. This study trains and predicts the model on real oil well production data from two different regions, and compares the performance of the proposed SSA-VMD-LSTM model with other methods combining mode decomposition with LSTM and methods using LSTM alone. The model's accuracy is measured using three evaluation standards: Root Mean Square Error (RMSE), Mean Absolute Error (MAE), and Mean Absolute Percentage Error (MAPE). The research results show that this combined model performs excellently in predicting oil well production, not only significantly improving the accuracy of the prediction, but also demonstrating strong robustness against anomalous data. In summary, the prediction model that integrates VMD and LSTM performs excellently in predicting oil well production, providing the oil industry with an innovative and effective prediction tool.

Speaker: Mr Huanran Qian (Zhejiang Ocean University)

10:20 Optical Properties versus Compositional & Structural Features of Dried Ink Thin Films

The water-based inks with polymeric latex particles used in printing technology deliver prints of superior quality at a low cost and environmental friendly. Via ink formulation and drying processes, the inkjet prints are characterized by a wide color gamut, intense gloss with tonal graduations and excellent mechanical properties.

Our study delves into enhancing the optical performance of these inks and printing processes by examining how light interacts with the printed porous surface. The ink's composition features pigments and polymeric beads randomly dispersed with interparticle spaces or fissures. Utilizing High-Resolution SEM imaging, we scrutinize the structure and local makeup of the ink layers post-printing, while VIS spectroscopy aids in assessing their optical attributes.

We employed ray tracing to construct an optical model for colored prints, aiming to forecast the reflected optical spectrum from prints possessing specific porous structures, determined by the spatial arrangement of latex, pigments, and voids/cracks. To ensure accuracy, the model's parameters align with those of a VIS spectrophotometer, maintaining consistent light spectra and angles.

Our results demonstrate the reliability of ray tracing, validated by experimental data, particularly for monochromatic layers on coated substrates. By integrating the print's structure and the optical characteristics of its constituents, we achieved a harmonious match between empirical and modeled outcomes.

Concluding our research, we conducted sensitivity analyses on color coordinates (L, a, b*), examining variables like layer thickness, pigment concentration, coverage, and ray count. This exploration offers insights into the intricate interplay between light and porous ink layers, advancing our understanding of their optical behavior.

Speaker: Dr Nicolae Tomozeiu (Canon Production Printing B.V.)

10:20 Optimization of Choke Size for Two-Phase Flow using Machine Learning

Abstract: The efficient development of shale gas reservoirs relies heavily on multistage fractured horizontal wells (MFHWs). Among the essential stages of hydraulic fracturing, the flowback process plays a crucial role in determining the effectiveness of both fracturing and production. The appropriateness of flowback timing and rate during the flowback process directly influences the long-term production effectiveness of shale gas wells.
The idealized numerical models traditionally based on feature parameters and yield fitting fail to fully characterize complex fracture systems, and the computational time of these numerical models is relatively lengthy. Therefore, this paper employs a big data model trained through machine learning, enabling rapid production calculations for reservoir blocks with just input data on fracture length and fracture permeability. By integrating big data models, choke models, pipe flow models, and proppant backflow models, a comprehensive model encompassing the wellhead, wellbore, and reservoir has been established. Through iterative calculations of the pressure drop from the wellhead to the formation, the maximum reverse circulation rate ensuring proppant backflow prevention is determined, thereby establishing a dynamic system for adjusting choke dimensions.
The study area is the Da'an Block in the Sichuan Basin. Choke operation strategy optimization was conducted under varying conditions of fracture permeability, fracture length, and fracture water saturation, resulting in a significant increase in gas production from shale gas wells. The paper identifies key factors influencing choke management in shale gas wells, providing technical support for on-site optimization of choke sizes. This research holds practical significance for the efficient development of shale gas reservoirs.

Speaker: Zhanrong Yang (Southwest Petroleum University)

10:20 Phase and transport behaviors of CO2 and oil in micro/nano-confinement

This work employs a series of cutting-edge micro/nanofluidic devices and approaches to investigate the miscibility characteristics between CO2 and oil, the diffusion properties of CO2 into oil, the saturation pressures of reservoir fluids, as well as the mutliphase flow of CO2 flooding and huff-n-puff within in micro/nano-confinement.

Speaker: Bo Bao (East China University Of Science and Technology)

10:20 Pore-scale insights into CO2-water two-phase flow and implications for benefits of geological carbon storage

The overall benefits of geological carbon storage (GCS) depend primarily on CO2 storability and injectability, expressed as saturation and relative permeability, respectively. The effects of GCS schemes on these two properties, the macroscopic response indicators of a two-phase seepage system, are closely related to pore-scale two-phase behaviors. However, the comprehensive effects of capillary number (Ca) and wettability (θ) on saturation and relative permeability are poorly understood. Here we proposed a digital rock physics (DRP) technique workflow for the phase field method and systematically investigated that how these effects control two-phase seepage at pore scale through the high-resolution visualization results obtained. We created a Ca-θ phase diagram identifying by four pore-scale displacement mechanisms, including finger-like invasion, burst, cooperative filling and coexistence of concave and convex interfaces, to illustrate the comprehensive effects of Ca and θ. We found that the relative permeability of the defending phase (water in this work) is determined by the net effect of the direct driving and viscous coupling effects. We organized comprehensive Ca-θ diagrams and revealed that a higher Ca and higher θ condition favors CO2 injectability, and a lower Ca and weak water-wetting condition favors CO2 storability. Our results demonstrate that GCS schemes, mainly about capillary number and wettability, can significantly influence CO2 storage performance via the two-phase flow at pore scale, which should be considered carefully. This work provides valuable insights into the selection of an optimal GCS scheme and contributes to an in-depth understanding of multiphase seepage at pore scale.

Speaker: 景锐 刘

10:20 Research on microscopic oil displacement mechanism of hydraulic fracturing assisted oil displacement technology

As conventional chemical flooding is used in medium-low-permeability reservoirs, the injectivity of the oil-displacing agent will be low, and the reservoir’s productivity will also be low. In addition, the chemical agents will have high viscosity losses and low utilization rates. Therefore, we propose a "hydraulic fracturing assisted oil displacement" (HFAD) technology based on large-scale fracturing. Field tests show that this technology is effective in improving oil recovery by exploiting the residual oil in medium and low permeability reservoirs. However, the micro-displacement mechanism of this technology is not clear, which limits its large-scale application. However, the microscopic oil displacement mechanism of this technology is still unclear, which limits its large-scale application. In order to solve the above problems, three sets of displacement experiments under different displacement pressures were carried out in this research. On this basis, porosity and permeability under overburden pressure test, constant velocity mercury injection test, scanning electron microscope test and wettability test were respectively conducted to analyze the changes of core pore permeability, pore throat radius distribution, fluid seepage resistance, pore size, pore throat connectivity and wettability before and after HFAD, and to clarify the microscopic oil displacement mechanism of HFAD technology. The research shows that HFAD technology can provide an efficient flow channel for HFAD agent, thus expanding the displacement phase sweep volume. At the same time, under the scouring action of the high-pressure injected fluid, the original line contact or point contact mode between the mineral particles gradually changes into free particles, the pore throat size increases, some large pores are formed, and the overall flow resistance decreases. Due to high pressure fluid injection, the formation energy increases, the core wettability changes from oil wet to weak water wet, and the residual oil on the pore surface is washed away. At the same time, the adsorption of oil displacement agent on the rock surface reduces the liquid-solid interfacial energy and changes the wettability, thus improving the oil displacement efficiency.

Speaker: Dr HE XU (Northeast Petroleum University)

10:20 Research on productivity prediction of fractured horizontal wells considering fracture closure

Tight reservoirs have low permeability, poor reservoir physical properties and strong inhomogeneity. Complex fracture networks with strong stress sensitivity are formed by volume fracturing, which leads to the difficulty of predicting the productivity of tight reservoirs. The semi-analytical solution improves computational accuracy and shortens computational time, and overcomes the problems such as the huge computational system of numerical simulation. Therefore, this study establishes the mathematical model for the productivity of fractured horizontal wells in tight reservoirs. This model which applied the source-sink theory, Green's function, and Newman's product method takes into account the flow of reservoir, fracture and wellbore, and establishes the coupled flow equations. The mathematical model are solved by semi-analytical method. the influence of main fracture parameters, the fracture closure and the complex fracture on the horizontal well productivity is analyzed.
The results show that the productivity of fracturing horizontal wells is largely influenced by the half-length of main fracture and the number of main fracture, while the productivity is less influenced by the fracture spacing and fracture conductivity; the productivity of horizontal wells increases with the increase of the number of secondary fracture in SRV. the larger the angle between main fracture and secondary fracture, the greater the productivity of horizontal wells; the productivity is largely influenced by main fracture closure and is less influenced by secondary fracture closure.

Key words: fractured horizontal well; productivity prediction; semi-analytical model; fracture closure

Speaker: Mr Wenrui Sun

10:20 Self-driven and directional transport of water during hydrate formation in porous media

As a green and innovative desalination process, hydrate desalination has attracted wide attention. However, the slow dynamics of hydrate formation and the difficulty of separating solid hydrates from liquid brine have hindered the industrialization of this technology. It is found that porous media can enhance hydrate formation. Hydrates have a water absorption effect and can form above the silica sand bed to facilitate separation. Unfortunately, the mechanism of self-drive and continuous directional transport of water during hydrate formation is not well understood. In this study, the spatial and temporal behavior of hydrate formation in quartz glass beads was observed using a nuclear magnetic resonance system. The results show that not all guest molecules that can form hydrates exhibit the water absorption effect of hydrates. The interfacial tension between hydrate and bound water provides the capillary driving force for water migration. Large granular sand has larger water migration channels, and low initial water saturation will inhibit water migration. The results of this study deepen our understanding of water migration during hydrate formation in porous media. Our results have great potential applications in seawater desalination, sludge dewatering processes and gas capture.

Speaker: Lingjie Sun (Dalian university of technology)

10:20 Stress and chemical sensitivity of hydraulic permeability in fine-grained sediments sampled from the northern South China Sea

Natural gas hydrates are widely distributed in fine-grained marine sediments containing various kinds of clay minerals, for example, marine sediments in the northern South China Sea with massive illite. It is of great significance to explore how hydraulic properties of these marine sediments evolve during hydrate production, aiming to acquire reasonable regulation and controlling of gas and water production. This study conducts water ratio limit tests, oedometer consolidation tests, and liquid flushing test on specimens molded by using marine sediments sampled from a hydrate distribution region in the northern South China Sea, and lots of experimental data under different salinity and stress conditions are acquired and analyzed. Results show that plastic index, liquid and plastic limits of the sediments all decrease with increasing pore brine salinity. Hydraulic permeability and conductivity of the sediments increase with increasing pore brine salinity but decrease with increasing stress. In addition, the sensitivity index due to stress changes becomes larger when the pore brine salinity increases, and the sensitivity index due to salinity changes decreases with increasing stress. The proposed fitting equation connecting the hydraulic conductivity and the normalized void ratio is easy to use as values of the fitting parameters do not depend on the pore brine salinity.

Speaker: Lele Liu (Qingdao Institute of Geology, China Geological Survey)

10:20 Study on Accessibility Characteristics of Pore Structure of Hard-to-drain Coal Based on NMR-MnCl2 Method

In order to achieve a fine characterization of the connectivity characteristics of the coal internal pore structure, this paper proposes an evaluation method for the connectivity characteristics of the coal pore structure based on NMR-MnCl2. Since the transient magnetic ion Mn2+ diffuses into the pores, the water signal of the pores will be shielded, which will be reflected in the change of the peak area of the T2 spectrum. Therefore, this paper inverts the Mn2+ diffusion characteristics by analyzing the change rate of the NMR T2 spectrum peak area, so as to characterize the access characteristics of the pore structure in coal. At the same time, according to the change characteristics of NMR T2 spectrum distribution at different times, the pores in coal are divided into four types: easy-to-reach pores, relatively difficult-to-reach pores, difficult-to-reach pores and isolated pores. The results show that the proportion of easily accessible holes in hard-to-drain coal is only 39.75%, which is far lower than 61.69% in easy-to-drain coal; and the proportion of isolated holes is 33.60%, which is much higher than 12.21% in easy-to-drain coal. In addition, the pore size distribution range of the isolated pores of hard-to-drain coal is wider, and both nanometer and micrometer pore diameters are developed. In addition, through the observation of pore morphology and development characteristics, it is found that the overall pore development of hard-to-drain coal is poor, the mineral pores are relatively developed, and the matrix pores are less developed. At the micron scale, the distribution of pores in the pore development area is chaotic, and the proportion of connected pores is only 32.41%, and the distribution of zonal pore groups is present. More pore sizes are smaller than 5 μm and develop in isolation in the form of micro-nano pore groups, resulting in the inaccessibility of the overall pore structure.

Speaker: Mr Tong Liu (China University of Mining and Technology)

10:20 Study on CCUS-EGR Numerical Simulation of Deep Carbonate Gas Reservoirs

CCUS-EOR (Carbon Capture, Utilization, and Storage- Enhanced Oil Recovery) has been used successfully in the field of exploration and development. However, there is less use of CCUS-EGR (Carbon Capture, Utilization, and Storage- Enhanced Gas Recovery) in various countries. CO2 (carbon dioxide) has certain advantages in improving the recovery rate of natural gas reservoirs. (1) Injecting CO2 into the formation is helpful to increase formation pressure and supplement formation energy. (2) CO2 has greater viscosity and density than CH4 (methane), which is beneficial to the mobility ratio of displacement. (3) CO2 and CH4 are both supercritical under formation conditions and are more likely to be miscible. (4) CO2 mixes with formation water to form carbonic acid bridge plugs with greater viscosity, which is beneficial to slowing down water invasion. (5) The adsorption potential of CO2 in the formation is greater than that of CH4, so it can replace CH4 in the reservoir. However, CO2 displacement gas reservoirs also have many problems. (1) The rapid breakthrough of CO2 makes the recovery efficiency of water-containing gas reservoirs less effective. (2) The long-term interaction mechanism of CO2-formation water-rock and its impact on rock structure are not clear. (3) The mechanism of fault activation and fracture extension induced by CO2 injection is unclear. At present, numerical simulations to evaluate the EGR effect focus on shallow and middle-layer tight sandstones to evaluate CO2 injectability, gas injection rate, gas injection pressure, breakthrough time, and recovery degree. There are few studies on EGR in deep and ultra-deep carbonate rocks. This study establishes a dual-pore dual-permeability mechanism model to optimize the technical development strategies for EGR in deep carbonate reservoirs with developed fractures and cavities, such as well pattern, injection pressure, injection rate, and recovery degree. The influence of reservoir fracture development and gas injection location on gas channeling is studied. The influence of CO2-water-rock reaction and gas adsorption and diffusion on seepage should be considered as much as possible in the simulation. The distribution and variation of gas component concentration during CO2 displacement of CH4 in different types of reservoirs are studied. The influence of geological factors such as the degree of fracture and cavity development and fluid properties (influenced by temperature and pressure conditions) such as fluid viscosity on the EGR effect is summarized.

Speaker: Yuxiang Zhang (Research Institute of Petroleum Exploration Development)

10:20 Study on mechanism of removal of residual DNAPL by co-injection of ethanol and CO2 into 2D porous micromodel

Groundwater contaminated with dense non-aqueous phase liquids (DNAPLs) such as chlorinated hydrocarbons is difficult to remediate, and the effectiveness of conventional pump treatment techniques is very limited due to its low contaminant solubility. Enhanced in-situ flushing has attracted widespread attention as an alternative to the use of flushing fluid such as cosolvent and gas co-injection. It is very important to understand the recovery mechanism of cosolvent and gas co-injection into polluted aquifers to improve the recovery efficiency of polluted aquifers. In this study, the removal process of residual PCE in a two-dimensional (2D) micromodel that is used to represent the porous media with different concentrations of ethanol + CO2 and different flushing rates was observed by using a camera at room temperature and pressure, and the removal mechanism of DNAPLs under cosolvent + gas co-injection was preliminarily understood. Firstly, it was verified that increasing the concentration of ethanol solution could increase the dissolution rate of ethanol to PCE and promote the dissolution of residual PCE. Secondly, when the ethanol solution and CO2 were co-injected into the micromodel, the residual PCE in the injected CO2 flow channel migrated out of the micromodel, which also changed the distribution of PCE, but did not reduce the interface area between PCE and flushing solution in the pore channel. It is well known that the interfacial area is proportional to the dissolution rate, which means that the injected gas does not inhibit the dissolution of the ethanol to the PCE, so the remediation efficiency of the contaminated aquifer can be significantly improved. In addition, a small fraction of PCE remains in contaminated aquifers that are troubles to remove in the small pore channels or the dead end channels, and are hard to completely repair with only cosolvent flushing. In the case of co-injection of ethanol solution with CO2, CO2 cannot enter these channels, but the ethanol solution can be sent into these channels to contact with PCE, promote the dissolution of PCE, and thus improve the removal rate of PCE in the aquifer. Finally, different experiments were compared, and it was found that when the injection flushing rate ratio of 60wt% ethanol to CO2 was 1:2, the removal rate of DNAPLs could be improved in a short time, and the amount of cosolvent could be saved, so as to obtain the best remediation scheme, which is of great significance for rapid repair and cost saving in the actual field.

Speaker: Dr Min Yuan (School of Environmental Studies, China University of Geosciences, Wuhan 430078, China)

10:20 TH2M modelling: Extended analysis of gas phase appearance in low-permeable porous media

This manuscript presents a comprehensive study on the numerical simulation of gas transport in clay rock using the finite-element method, with a specific focus on the transition of the transport regime from single-phase to two-phase conditions. Our code demonstrates the capability to cover this transition seamlessly, without relying on common approaches such as the use of persistent primary variables or the switching of primary variables. In our simulations, the primary variables are gas pressure, capillary pressure, temperature, and displacement of the solid phase. To validate our approach, two benchmark tests were conducted. The first benchmark replicates a well-known scenario in the field of radioactive waste disposal, where gas injection induces a transition from single-phase to two-phase flow. The second benchmark simulates a core drilling experiment, where the mechanical unloading of a fully saturated domain results in the appearance of a gas phase. In addition to analyzing primary quantities, a comprehensive set of secondary variables was introduced to gain deeper insights into the model’s operation and enhance understanding of the underlying processes. By plotting these secondary variables alongside the primary quantities, a comprehensive understanding of the system’s behavior during the transition of flow regimes was obtained. The primary objective of this work is to improve our understanding and confidence in the model used for simulating large repository systems, particularly in the context of nuclear waste disposal and CO_2 storage. By successfully capturing the transition from single-phase to two-phase gas transport, our study provides valuable insights into the behavior of gas in clay rock. This enhanced understanding lays the groundwork for utilizing the model effectively in large-scale repository simulations, contributing to the advancement of the field of gas transport in clay rock.

Source:
Grunwald, N., Nagel, T., Pitz, M., & Kolditz, O. (2023). Extended analysis of benchmarks for gas phase appearance in low-permeable rocks [Article]. Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 9(1), Article 170. https://doi.org/10.1007/s40948-023-00703-3

Speaker: Olaf Kolditz (Helmholtz Centre for Environmental Research UFZ / TU Dresden)

10:20 The effect of fractures and heterogeneity on the effective growth kinetics of microorganisms in large scale modelling of porous media

Various microorganisms, such as Sulfate Reducing Bacteria (SRB), live in underground reservoirs. The growth rate of microorganisms in a reservoir is highly dependent on various parameters (e.g., the concentration of the nutrients and inhibitors, temperature, pH, and salinity). Especially in case of waterflooded hydrocarbon reservoirs, for large scale modelling of microbial processes, it is close to impossible to capture the exact distribution of these parameters without a certain level of simulation grid refinement, which increases computational costs, and without an accurate knowledge and definition of the distribution of static parameters in the model that control flow properties, such as heterogeneity in permeability distribution in various scales and the presence of fractures. Moreover, the distribution of the parameters affecting microbial growth in a reservoir is highly dependent on geochemical and thermal processes. For instance, the chemical interactions between reservoir fluids and rock (e.g., adsorption and desorption) under varying temperature can affect the concentration of nutrients and inhibitors for microbial processes as well as the measured produced water or gas compositions used for history matching. Geochemistry can also control the pH of the medium, which in turn affects the growth kinetics of microorganisms, the speciation of chemical species in the water phase, and the partitioning of chemical species among phases. The interconnected interactions among biological, hydrological, and geochemical processes as well as numerical challenges of nutrients and heat transport in large-scale models makes modelling and validating microbial growth in field scale particularly challenging.
This study demonstrates such challenges and presents a mathematical approach for upscaling microbial growth rates that corrects the effect of grid size on nutrient and temperature distribution in the reservoir and the corresponding effective growth rates. Moreover, the common way of representing fractures in field models using commercial reservoir simulators is re-evaluated, and it is shown how it can result in misleading reservoir models if the history matching is done using only production rates and pressure, neglecting the chemical composition of the produced water. Furthermore, the most important parameters in the model that highly affect the quality of the predictions are identified and proposed as research gaps for future experimental measurements.
The results show good predictions of upscaled (effective) microbial growth rates corrected for the effect of grid size on temperature distribution in course-grid simulation compared to refined simulation using non-upscaled growth rates. Moreover, it is demonstrated how the effective microbial growth behavior in presence of a fracture varies with the refinement level of the system and the method used to define the fracture in the model when the fluid production, pressure, and composition data match.

Speaker: Dr Hamid M. Nick (DTU)

10:20 The Future of Core Analysis: Estimating of Effective Porosity via µCT & Transfer Learning

Currently, µCT has emerged as a valuable tool for analyzing rock samples on a standard core plug scale. Typically utilized in Special Core Analysis (SCAL) as an assessment instrument before the filtration experiment, µCT serves to examine core samples and identify any potential defects, cracks, or heterogeneities that could influence flow behavior during the procedure. Despite the relatively low resolution of such µCT images, they contain valuable information on lithological features and reservoir properties. This study focuses on the development and validation of an integrated methodology that combines µCT scanning of core plugs with machine learning algorithms to predict effective porosity values. For this work, we created a dataset of microtomographic images for standard samples of various types of reservoir rocks and annotated all images based on experimentally determined values for the samples. Utilizing a transfer learning approach, we trained a ResNet50 model to predict effective porosity values for standard core plugs. The results demonstrated high validation scores for the obtained values. This approach can be used to optimize Standard Core Analysis (SCA) procedures, reducing the time and financial costs associated with hydrocarbon extraction procedures from core plugs.

Acknowledgments
This work was supported by the Ministry of Science and Higher Education of the Russian Federation under agreement No. 075-15-2022-299 within the framework of the development program for a world-class Research Center "Efficient development of the global liquid hydrocarbon reserves".

Speaker: Rail Kadyrov (Kazan Federal University)

10:20 The implications of subsurface CO2 geological storage for mineralogy and geomechanical behavior: Triassic Sherwood Sandstone, East Irish Sea, UK

There is a growing recognition of the need to reduce the atmospheric concentration of Carbon Dioxide (CO2) to slow the effects of climate change. Many sedimentary basins, which host prolific hydrocarbon resources, are now being reassessed for their potential role as subsurface storage sites, including the East Irish Sea, UK. However, there are implications for subsurface CO2 geological storage, such as mineralogical alterations due to the acidic character of pore fluids and potential changes in pore space and grain character. Such rock-fluid interactions may have consequences for the geomechanical behavior and petrophysical parameters.
In this study, we undertake an integrated method through hydrothermal and mechanical experiments to assess the impacts of CO2 storage by comparing the pre- and post-reacted samples in terms of mineralogy, petrophysical parameters and geomechanical behavior of Triassic sandstone core from the Sherwood Sandstone Group, South Morecambe Field, (110/8a-C5) East Irish Sea, UK. The Triassic Core samples are subarkosic arenites made up mainly of quartz, K-feldspar, dolomite and illite which are determined using optical microscopy, SEM and XRD. Detailed SEM images and SEM-EDX mapping illustrate dolomite cement, partial alteration of K-feldspars and illite coating the quartz grains, which was largely responsible for porosity preservation. The density and porosity of the pre-reacted samples are 2.1g/cc and ~15 - 20.5% respectively. The confined permeability is 1.9e-19m2. In terms of the rock’s geomechanical behavior, the Young’s Modulus obtained after the triaxial loading test is 5.3GPa. Hydrothermal reactor experiments were carried out in a cylindrical stainless steel Parker Autoclave Engineers with 500 ml volume, the vessel was heated by a ceramic band heater at 80°C and the pressure was raised and kept constant at 20 MPa. In each experiment, the vessel was partially filled with a seawater-like fluid, the Triassic sandstone core was immersed in this fluid, CO2 was injected into the remaining space and the autoclave was pressurized. The remaining fluid was analysed for key chemical species using ICP-OES to help the understand mineralogical alterations and potential authigenesis.
Carbonate dissolution, increase of the alteration degree of K-feldspar, subordinate Illite precipitation or even dissolution in the hydrothermal reacted sample can be expected leading to the modification of pore space and rock cohesion. Considering that mineral dissolution is the main rock alteration process, an increase in porosity and permeability can be expected. Conversely, the density and Young’s Modulus can have smaller values mainly due to the loss of dolomite cement and consequent rock weakening.
Investigating the potential physical changes in porosity, permeability and rock strength and comparison of the results from pre- and post-experiments, is crucial to assess which are the main reactive minerals and classify the best and safest rock facies for a subsurface CO2 geological storage. The results presented will be used to predict the best petrophysical facies and improve our understanding of injecting CO2 to avoid fractures and fault reactivation.

Speaker: Mr Krishna Silva (Petrobras S.A.)

10:20 The wettability of surfactant solutions on particles in simulated reservoirs

The study employed the Washburn capillary rise method to explore the wettability of three conventional cationic, anionic, and nonionic surfactants - CTAB, SDS, and TX-100 - on powders with varying polarities and the resultant behavior of droplets under capillary force. For kaolin, illite, and silica nanoparticles, CTAB's hydrophilic portion interacted with the powder through electrostatic forces. TX-100 molecules adhered to solid particles via hydrophilic epoxy groups and hydrogen bonding interactions. SDS molecules attached to hydrophilic particles through hydrophobic groups and Lifshitz-van der Waals interactions. Moreover, in the case of hydrophobic oil sands, CTAB, SDS, and TX-100 exhibited adsorption through hydrophobic interactions. Notably, at the critical micelle concentration (CMC), surfactant molecules aggregate to form micelles, impacting solution mobility and altering wetting properties such as contact angles. This study highlights the dynamic interplay between surfactant solution surface tension, solid-liquid interfacial tension, and their effects on wetting behavior at varying solution concentrations. The competitive relationship between dynamic adsorption and microscopic surface tension influences the wetting dynamics of the solution.

Speaker: Dr Wang Zheng (China University of Petroleum (East China))

10:20 Upscaling the Navier-Stokes-Cahn-Hilliard model for incompressible multiphase flow in inhomogeneous porous media

In this work, we present a macroscopic model for the flow of two immiscible and incompressible fluid phases in inhomogeneous porous medium. At the scale of pores, the flow is governed by the Navier-Stokes equations and the evolution of the phase interface is governed by the Cahn-Hilliard equation. Using the method of volume averaging, the upscaling equations describing the averaged behaviour of both fluids at the so-called Darcy scale associated with unknown spatial deviation variables are obtained. Then, we assume that spatial derivations of interested variables are related to the averaged quantities with undetermined coefficients. But, the values of all the undetermined coefficients can be evaluated by solving the closure problems associated with related boundary-value problems in each representative volume element. In particular, the derived model can be greatly simplified for the two fluids with matched densities. The differences between the resulting equations and the empirical two-phase flow model widely adopted in oil industry are also discussed. Finally, a multiphase lattice Boltzmann model is developed for simulation of such multiphase flow, and numerical results highlight the importance and necessity of incorporating pore-scale information into the macro-scale equations.

Speaker: chunhua zhang (North University of China)

11:50 → 12:50 MS01: 4.2

11:50 Design of viscosified CO2 for carbon storage in saline aquifers by continuum-scale imaging and modeling

Carbon capture, utilization, and storage (CCUS) is expected to play an essential role in global decarbonization. Safe and efficient storage of CO2 in saline aquifers requires mobility control to prevent CO2 from exposure and accumulation at the formation top. An effective agent for CO2 mobility control should be carefully tailored with low adsorption in rock surfaces, low injection pressure, and high capacity of carbon storage. Here, we develop and utilize engineered oligomers at very low concentrations to directly viscosify the sc-CO2 and demonstrate their effectiveness for improving CO2 storage in saline aquifers with layered formation. We also present results from X-ray CT imaging to advance the understanding of two-phase CO2-brine flow in layered cores and firmly establish the transport mechanisms.
X-ray CT imaging of displacement experiments is conducted to quantify the in-situ sc-CO2 saturation spatiotemporally in the brine-saturated porous media with homogeneity and heterogeneity. In neat CO2 injection, the large mobility contrast between the CO2 and brine results in the channeling of CO2 through the high permeability zone, leading to an early breakthrough and low brine production. Direct measurement and in-situ saturation measurement show that there is around 10% difference for cumulative brine production in neat CO2 injection. The difference between the two is attributed to the solubility of the produced water in the produced CO¬2 at atmospheric pressure which has been neglected in the past. We show that when the forgotten effect is accounted for, there is a good agreement between direct measurements and in-situ saturation results. The X-ray imaging demonstrates that the large effect of improved carbon sequestration is attributed to reduction of residual brine saturation from increase in interfacial elasticity from the addition of the oligomers. The combination of mobility control and residual brine saturation reduction is expected to improve CO2 storage in layered formation by effective viscosification at very low concentrations of oligomers. We also develop a model coupled with hydrodynamics and thermodynamics to compare, identify and analyze with the experimental observations from X-ray CT imaging. The model sheds light on understanding the CO2 flow in saline aquifers.

Speaker: Dr Boxin Ding (Peking University Shenzhen Graduate School)

12:05 Critical Thresholds for CO2 Foam Generation in Homogeneous Porous Media

Long-distance propagation of foam is one key to deep gas mobility control for CO2 sequestration (Rossen et al., 2022). It depends on two processes: convection of bubbles and foam generation at the displacement front. Prior studies with N2 foam show the existence of a critical threshold for foam generation in terms of a minimum pressure gradient (∇pmin) or minimum velocity (vt,min), beyond which strong-foam generation is triggered. Yu et al. (2020) show that the same mechanism controls foam propagation. There are few data for ∇pmin or vt,min for CO2 foam.

We conduct extensive experiments to quantify ∇pmin and vt,min for CO2 foam generation, and quantify the correlations of ∇pmin and vt,min with factors including injected foam quality (gas fraction)–fg, surfactant concentration–Cs, and permeability–K. In each experiment, steady-state pressure gradient is measured at fixed injection rate and quality, with velocity increasing in a series of steps. The abrupt jump in ∇p against vt marks the trigger of strong foam generation (see graphical abstract: N2 data on top, schematic in middle, data for ∇pmin on bottom).

In most cases, the experimental results for ∇p as a function of vt identify three regimes: coarse foam at low ∇p, an abrupt jump in ∇p (point B in graphical abstract) and strong foam at high ∇p. The abrupt jump in ∇p upon foam generation demonstrates the existence of ∇pmin and vt,min for CO2 foam. We further show how ∇pmin and vt,min scale with fg, Cs and K. The effect of K is dominant over the effects of fg and Cs. Specifically, both ∇pmin and vt,min increase with foam quality: e.g. for fg over a range 0.5 – 0.9, ∇pmin rises by a factor ~ 2 – 4 and vt,min by a factor ~ 4. Increasing Cs leads to decrease in both ∇pmin and vt,min by factors of less than three. ∇pmin changes considerably with permeability. Our results in consolidated sandpacks show that ∇pmin for CO2 foam scales with K as K-2, in comparison to N2 foam, where ∇pmin scales as K-1 in unconsolidated homogeneous sand or bead packs. However, the data of Gauglitz et al. (2002) for CO2 foam in Boise sandstone do not show a dependence of ∇pmin on K. The difference may be a result of the impact of heterogeneity of the Boise sandstone, since foam generation is easier in heterogeneous media.

∇pmin is about 0.17 bar/m (~ 0.75 psi/ft) for K ~ 270 mD, 2 to 3 orders of magnitude less than for N2 foam. This pressure gradient is easily attainable deep in formations. This suggests that generation is much less of a restriction for long-distance CO2 foam propagation than with N2. Foam propagation could still be challenging in low-permeability reservoirs (∇pmin ~ 10 bar/m for K = 27 mD). Nevertheless, realistic formations are heterogeneous and field application deploys alternating-slug injection. Both factors help foam generation and thus reduce the value of ∇pmin. More research is needed to determine conditions for CO2 foam propagation under those conditions.

Speaker: Dr Jinyu Tang (United Arab Emirates University)

12:20 Effects of Thermal Cycling on Sealing Ability of Sealant Surrounding Steel Pipe for CCS Applications

In wells designed for carbon capture and storage (CCS), leakage pathways may develop due to thermal cycling when injecting cold CO2 into the warm subsurface, for example, debonding between cement and casing, or fractures in the cement itself. These leakage pathways can impede the permanent geological storage of CO2. In this study, we investigate how thermal cycling affects the sealing ability of cement surrounding steel wellbore casing under unconfined conditions. To this end, cylindrical sealant samples (OD 30 mm, Length 70 mm) with a steel pipe (ID 4 mm, thickness 1 mm, length 110 mm) in the middle, are used to mimic the cement sheath surrounding the casing in the wellbore. We adopt sealants of five different compositions. S1 is ordinary Portland cement (OPC)-based, S2 is OPC-based with ultra-low permeability, S3 is OPC-based with CO2 sequestering additives, S4 is calcium aluminate cement(CAC)-based, and S5 is geopolymer-based.
In the experiments, we mount PVC caps at each end of the sample to isolate the flow channel through the pipe from another flow channel toward the top surface of the sealant. Three thermocouples are installed at the surface of the sealant, inlet, and outlet of steel pipe, separately. The entire sample assembly is placed in an oven. Before thermal cycling, we apply 3 bar N2 on the sealant and monitor its penetration rate through the sealant for 1 hr. Subsequently, we heat the sample at 60 for 1.5 hr. To apply thermal cycling, we inject 5°C water through the pipe at 80 ml/min for 2 mins, then stop the injection and allow the sample to reheat for 12 mins before the next injection. We repeat this for 12 cycles.
In our study, we haven’t observed any cracking in the sealant material itself. This is because the induced thermal stress upon thermal cycling is smaller than the tensile strength of the sealant. Among the five sealants, we found that the bonding performance of S3 on steel is the best. All other sealants were negatively affected by thermal cycling: S1 and S5 experienced more debonding than others, while S2 and S4 experienced minor debonding. The bond strength of all five sealants (including S3) decreases after thermal cycling, further indicating that debonding has occurred. We attribute the magnitude of debonding to be due to a combination of thermal expansion coefficient and Young’s modulus. Steel has a high expansion coefficient compared to sealant. Of the tested sealants, S1 and S5 have the lowest thermal expansion coefficients, while S2 and S4 have the largest, i.e. closer to that of the steel. We hypothesize that, during thermal cycling, S2 and S4 expand and shrink with a more similar rate as steel, resulting in a small mismatch in strain and hence less debonding compared to S1 and S5. Additionally, S1 has the largest Young’s modulus, whereas S3 and S4 have the lowest. This indicates that S3 and S4 are more compliant, so S3 and S4 can more easily elastically deform upon thermal cycling, resulting in less damage to the bonding.

Speaker: Kai Li

12:35 Water Thin Films on Kaolinite Gibbsite and Edge Surfaces and Their Effects on Surface Wettability in Relation to Geological Carbon Sequestration

Geological carbon sequestration (GCS) in subsurface media is one of promising approaches to alleviate excessive CO2 emission [1], while saline aquifers are ideal GCS sites [2, 3]. Generally, four trapping mechanisms including: structural/stratigraphic trapping, residual trapping, solubility trapping and mineral trapping are proposed for GCS in saline aquifers [4, 5]. Among them, structural trapping plays a dominant role in the early stage of GCS, during which CO2 can be sealed in porous media thanks to the capillary pressure between CO2 phase and water phase [6, 7], which is dependent on CO2-water-rock contact angle. It is reported that clay minerals such as kaolinite, account for a large proportion in caprocks. Thus, the knowledge about CO2-water-kaolinite contact angle is of great importance for CO2 structural trapping.
Kaolinite is a typical 1:1 type clay, consisting of one tetrahedral sheet and one octahedral sheet, which are known as siloxane and gibbsite surfaces, respectively [8]. Previous experimental and computer simulation studies [9-12] have shown that kaolinite gibbsite surface is hydrophilic, while siloxane surface is moderately hydrophobic [12]. Although these studies offer general understanding about CO2-water-kaolinite contact angle, they have notable limitations. For example, it is extremely challenging to distinguish kaolinite surfaces in experiments, while the kaolinite surfaces used in experiments are often coated with quartz [11] and soil [9], and sample qualities are highly dependent on their preparation processes [13].
While CO2-water-kaolinite contact angle on two kaolinite basal (gibbsite and siloxane) surfaces has been heavily studied [14], the contact angle on kaolinite edge surface remains unclear. Bickmore et al. [15] reported that the ratio of kaolinite edge surface area to total surface area can be up to ~50%. The water-edge surface interactions, interfacial water structures, and edge surface wettability still remain unknown. Kaolinite edge surface is not atomically flat [16, 17], while surface wettability is also dependent on surface roughness [18]. To the best of our knowledge, kaolinite edge surface wettability in CO2-water-kaolinite system has not been reported yet.
Thus, in this work, we use molecular dynamics simulations to investigate kaolinite gibbsite and edge surfaces wettability in CO2-water-kaolinite systems and elucidate the effect of interfacial water structures at a typical GCS condition (330 K and 200 bar). We find that both gibbsite and edge surfaces are strongly water-wet, while CO2-water-kaolinite contact angle (i.e., 180°) on edge surface is even larger than that of gibbsite surface (i.e., 153°). Due to strong surface atomistic heterogeneity, water thin films with muti-layered hydration structures emerge on edge surface by forming complex hydrogen bonding networks and deplete CO2 molecules from the surface. On the other hand, in the presence of CO2 molecules, water thin films on gibbsite surface consist of single water adsorption layer.
Collectively, our work provides important insights into the dependence of water thin films and interfacial water structures on surface heterogeneity and their effects on surface wettability in CO2-water-kaolinite systems, enhancing fundamental understanding about CO2 structural trapping for GCS.

Speaker: Mr Minjunshi Xie (University of Alberta)

11:50 → 12:50 MS03: 4.2

11:50 Countercurrent imbibition in shale with parallel dense fractures: analytical model and anisotropic relative permeability

Countercurrent imbibition is the process that the wetting phase spontaneously displace the nonwetting phase in porous media while the nonwetting phase is recovered at the wetting phase inlet[1]. It is a major mechanism of shale oil recovery, where the permeability is so low that co-current imbibition is largely limited[2, 3]. For fractured media, classic dual-porosity model is based on good fracture connectivity and assumes that fractures are evenly distributed into each grid[4, 5]. Although the heterogeneity and anisotropy of porous media are considered in some dual-porosity models, they mainly assume topologically connected fracture network [6, 7].

However, in continental shale reservoir, the distribution and morphology of fractures are very unique. As shown in Fig. 1a , continental shale consists of very densely-packed parallel microfractures. On one fold, fractures are not directly connected, that breaks the assumption of continuous fracture phase in dual-porosity models; on the other fold, the distance between neighboring microfractures are extremely small (100-500 micrometers)[8], so they are hydrodynamically highly correlated by coupling and not independent. Unfortunately, there is still no suitable REV (representative elementary volume) scale model to describe imbibition in such parallel dense fracture system.

In this study, we first numerically simulate the countercurrent imbibition in a dual- unidirectional microfracture system using MRST with fine grids, using typical continental shale parameters. Two distinct stages are identified: an early stage that fractures can be treated as independent, and a late stage that neighboring fractures are strongly correlated by capillarity. In both stages cumulative oil production grows proportional to the t^0.5(shown in Fig. 1), while with different pre-factors. We show that the late stage is the dominant stage in shale oil recovery. After elucidating the mechanisms of fracture-fracture capillary interaction, we successfully derive analytical solution for countercurrent imbibition kinetics at the late stage, and accordingly propose equivalent REV models for both systems. The REV model is validated with fine-grid simulation.

Notably, we find that anisotropic relative permeability is required to depict imbibition in such parallel dense microfracture system at REV scale. This is distinctive from classic approaches for modeling anisotropic media where simply adopting anisotropic absolute permeability is adequate. It brings new challenge in numerical simulation at reservoir scale.

Speaker: Fei Yu

12:05 Relative Permeability Cyclic Hysteresis and its Application in Improving the History Matching Quality and Evaluating Deliverability Capacity in a Fractured Carbonate Gas Reservoir Storage Field

The SF reservoir in China is a naturally fractured but low permeability carbonate gas reservoir with average porosity and permeability about 4.3% and 3.7mD, respectively. Macro- and micro-fracture as well as large vuggy pore all developed in the reservoir making it quite heterogeneous. This reservoir has been converted to underground gas storage (UGS) after 25 years depleted production with the initial gas-water contact (GWC) rise of nearly 200m. Gas injection commenced in 2014.
It has long been observed that history matching of UGS dynamics is much poor even for many weak water-drive sandstone reservoirs in China. Naturally, simulation prediction will be unreliable. To accurately quantify the actual deliverability capacity of the more complex SF UGS, a series of 5 cycles gas/water successive drainage and imbibition relative permeability and high rate injection/withdrawal physical simulations under realistic reservoir conditions were performed to better understand UGS dynamics behavior in the fractured reservoir and improve history matching quality. Then, a dual porosity simulation model was constructed and modified to determine the actual capacity of the SF UGS.
The simulation model achieves a good match of the historical reservoir pressure and production of gas, oil and water during past production through modifications of local matrix and fracture permeability, aquifer strength and well Productivity Indices (PI). However, history matching of the three years UGS operations is significantly poor. In fact, laboratory tests indicate that gas-water relative permeability exhibits significant hysteresis in tight matrix and micro-fractured samples. Particularly, irreducible water and residual gas saturation steadily increase, respectively, 2.8% and 25% in the matrix samples after 5 cycles’ successive drainage and imbibition process suggesting the effective pore volume will significantly decline in the thick transition zone. It was also found that nearly 18% of the gas-filled pore volume cannot be utilized during the high rate withdrawal while it was effective in the primary depletion. According to the above experiments, hysteresis was considered by cycle-dependent relative permeabilities and repeated model restart. Deterioration of the effective pore volume was implemented through introducing heterogeneous matrix-fracture interaction coefficients based on integrated studies of fractures distribution and heterogeneous permeability. A better well static pressure and water production were then obtained while keeping the good history matching of the previous depletion.
Simulation prediction suggests that the maximum working gas volume may slightly less than 1.2bcm previously designed using reservoir engineering method and the deliverability is about 12 million cubic meters per day. Pressure sink and water coning are the two key factors limiting the UGS performance. This study reveals that reservoir simulation combined with physical simulations can better understanding reservoir dynamics and then give a more accurate prediction.

Speaker: Mr Junchang SUN (Northeast Petroleum University)

12:20 Differential Mechanisms of Acidic Fluid-induced Dissolution in Jurassic Ahe Formation Reservoirs across Various Locations within the Northern Structural Zone of the Kuqa Depression

Abstract: The northern structural zone of the Kuqa Depression exhibits varying lithological characteristics within the Jurassic Ahe Formation, which is predominantly composed of gray to light gray medium-coarse sandstone with high heterogeneity. Based on the structural features of the region, the northern structural zone is divided into the Horst scetion, North slope section, and the Dibei slope section. Among these, the Horst scetion and the Dibei slope section are the main focus of the study. Utilizing techniques such as thin-section observation, scanning electron microscopy, nuclear magnetic resonance, constant rate mercury injection, and micro-CT, the differences in pore structure characteristics of the Ahe Formation reservoir were investigated. This approach aimed to elucidate the causal mechanisms behind the reservoir variations. The Ahe Formation reservoir is primarily composed of lithic sandstone, with dissolution pores being the predominant pore type, followed by micropores. The development of dissolution pores in the Horst scetion is notably superior to that in the Dibei slope section. Additionally, the Horst scetion exhibits larger pore throat radius and better connectivity, leading to a superior pore structure compared to the Dibei slope section. The impact of dissolution processes on pore structure is evident, and therefore, investigating the controlling factors of differential dissolution in various locations within the northern structural zone is crucial for delineating high-quality reservoirs. The Horst scetion represents a Fault~sand transport system, while the Dibei slope section constitutes a Sand~unconformity transport system. Acidic fluids serve as the primary controlling mechanism for the formation of dissolution features in the study area. On a planar scale, dissolution processes are influenced by injection intensity, with greater injection intensity favoring the occurrence of dissolution. Vertically, these processes are governed by conduit systems. In the study area, fluid migration is significantly more pronounced in conduit systems dominated by faults compared to those dominated by sand bodies. The variation in migration patterns at different locations within the northern structural zone results in differing intensities of dissolution processes, leading to variations in pore structure within the Ahe Formation reservoir.
Key word: The Kuqa depression, Dissolution pore, Microscopic pore structure, Accumulation period, Transport system

Speaker: chaobin Zhu

12:35 Effect of mineral on mechanical behavior of granite after high-temperature treatment by particle flow simulation

Understanding the effect of minerals on the mechanical behavior of granite under thermo-mechanical coupling is of great significance in deep engineering. In this paper, nine thermo-mechanical grain-based models of granite with different mineral contents were established based on particle flow simulation, revealing the influence mechanisms of temperature and mineral on the mechanical properties and micro-damage of granite. The results indicate that the macroscopic mechanical properties, micro-damage and failure mode of granite are synergistically affected by mineral, distribution and thermal properties. With increasing temperature, the thermally-induced cracks in the granite samples gradually gather from the edge towards the centre. The proportion of intergranular cracks in thermally-induced cracks is much greater than that of intragranular cracks. The stress concentration between mineral particles caused by the temperature increase is the main cause of thermally-induced cracks.

Speaker: Yahua Wang

11:50 → 12:50 MS06-A: 4.2

11:50 Multiphase Flow Behavior and Numerical Simulation in Fractured-vuggy Porous Media

he geological features of fractured-vuggy carbonate reservoirs are complex, primarily manifested in the multiscale nature, diverse distribution, and complex connectivity and combination of fractures and vugs. The fluid flow behavior in such media is complex, involving both porous flow in the matrix and fractures and free flow in vugs. This results in the internal flow showing features of coupled flow of two-phase or even multi-phase free flow coupling. Currently, research on the coupling of single-phase porous media flow and free flow has been very mature at home and abroad. However, the research on multiphase flow is not perfect, and the coupling mechanism is not clear, especially three-phase flow of oil, gas, and water, leading to immature development theories and methods for fractured-vuggy reservoirs and low recovery rates.As proven the behavior of three-phase flow of oil, gas, and water in fractured-vuggy reservoirs, this study, based on typical reservoir geology and flow features, designed and fabricated a physical model of fractured-vuggy media and conducted physical simulation experiments. Numerical simulation studies were then conducted based on these experiments, with the simulated flow trends being generally consistent with the experimental results. By combining numerical modeling with experimental approaches, a fundamental theoretical study on the three-phase flow of oil, gas, and water in fractured-vuggy reservoirs was conducted, illustrating the features of the three-phase flow in such media. This research has a certain guiding significance for the efficient development of fractured-vuggy reservoirs.

Speaker: Prof. Zhaoqin Huang (China University of Petroleum (East China))

interpore .pptx

12:05 A Robust three-phase equilibrium calculation framework for dimethyl ether (DME)-H2O-CO2-Hydrocarbon systems

CO2 flooding is a strategic measure to enhance oil recovery (EOR) while mitigating CO2 emissions. In recent years, dimethyl ether (DME) has emerged as a promising solvent used in EOR practices. Its potential application in CO2 flooding attracts considerable interest. However, accurate modeling of the phase behavior of the DME-H2O-CO2-Hydrocarbon system remains a challenge, which leads to the lack of a reliable reservoir simulator required by the industrial production simulation.
In this study, the phase behavior of the DME-CO2-H2O is systematically studied after the intensive literature collection and review. We developed a robust and efficient multiphase equilibrium calculation framework for the DME-H2O-CO2-Hydrocarbon systems. The Peng-Robinson EOS with the Huron-Vidal mixing rule is used as our thermodynamic model. We have implemented a combined successive substitution-Newton-trust region iterative algorithm to guarantee convergence in the stability analysis and multiphase flash calculations. Besides, the initial phase equilibrium constants (K-values) strategy is revealed to correctly detect the phase status for one-phase and two-phase stability analyses. We present the performance of our model with two characterized fluid systems from the literature. For each case, the fluid consists of 30% oil and 70% H2O, and the mixture of the different ratios of CO2 and DME is injected into the fluid. Our model works accurately and robustly for these cases, and we do not find a single mistake or convergent problem for more than tens of millions of tested points.
Our model and the developed algorithms can robustly and accurately predict the multiphase behavior of the DME-H2O-CO2-Hydrocarbon systems. To the best of our knowledge, our algorithm is the first one to meet the restricted standard for multiphase equilibrium calculations in the compositional simulation of injecting the mixture of CO2 and DME into a reservoir. Our developed method will provide the key contribution to the development of the compositional simulation for the DME-H2O-CO2-Hydrocarbon systems.

Speaker: Zhengbao Fang (China University of Geosciences (Wuhan))

12:20 Effect of Porous media on Minimum Miscibility Pressure

Nowadays, due to the substantial oil consumption and a significant reduction in the natural oil reservoir production capacity, the demand for methods to enhance and optimize production life, especially in mature reservoirs, has grown. Enhancing oil recovery (EOR) from mature reservoirs is a well-known technique that can meet growing energy demands. Among various EOR methods, gas-based techniques stand out as the most effective. This could be attributed to some advantages, including easier injection, higher efficiency, and reduced costs in comparison to alternative methods. In gas-based injection techniques, the minimum miscibility pressure (MMP) and enrichment (MME) are among the two determining factors for operational optimization. The impact of porous media on MMP is a key question from the scientific and operational point of view because due to the confinement of a porous media, the phase behavior of both oil and gas can vary according to the porous media characteristics, such as porosity and permeability.
The primary objective of this study is to present the Vanishing Interfacial Tension (VIT) test as an easy and fast experimental approach compared to the slim tube technique for the analysis and determination of optimal conditions in gas injection processes. This research covers the introduction of both laboratory experiments and mathematical modeling of the VIT test for a live oil sample and an injected hydrocarbon gas. This method aids in assessing the sensitivity of active mechanisms within gas injection processes to the composition of the injection gas. Furthermore, the VIT model in this study has been modified based on porous media porosity and permeability, which the results show the reduction of MMP by permeability/porosity ratio decrease, for example in one case the MMP varied from 3600 to 3200 psi by decreasing the permeability/porosity ratio from 2 to 0.1. Also, the interfacial tension of oil and gas varies from 8 to 6 mN/m. Hence, the miscibility can happen more easily by permeability/porosity ratio reduction.

Speaker: Masoud Riazi (Nazarbayev University)

12:35 Effects of particle density and pore fluid on granular flow in a rotating drum

Effects of particle density and pore fluid on granular flow in a rotating drum
Yu Chen 1, Si Suo 2, Yixiang Gan 1,3*
1 School of Civil Engineering, The University of Sydney, NSW 2006, Australia
2 Department of Civil and Environmental Engineering, Imperial College London, London SW7 2AZ, United Kingdom
3 Sydney Nano Institute, The University of Sydney, NSW 2006, NSW
* yixiang.gan@sydney.edu.au
The understanding of granular flow is of importance in many practical applications. This study employs both experimental and numerical analyses of dry and submerged granular media in a rotating drum, with a range of particle density. A continuum approach based on the two-phase flow and \mu(I) rheology is adopted, with all material parameters identified from experimental measurements. The accuracy of our model is evidenced by its ability to closely replicate experimental observations, particularly in the rolling and cascading stages. We specifically examined the dynamic angle of repose, flow region depth, and pore pressure behaviour within the granular region. The roles of particle density and pore fluid are demonstrated in distinct granular flow characteristics. We examine the solid pressure and fluid pressure distribution across the different cases in the submerged conditions. A significant advancement of our study is the normalisation of fluid pressure, which is achieved through a function of the Reynolds number, the contrasts in particle and fluid density. The unified correlation aligns with the principles of the Kozeny-Carman model. This work offers an effective numerical approach for design and optimisation of industrial processes involving granular flow.
Key words: granular flow; rotating drum; granular rheology; dynamic angle of repose; pore fluids

Speaker: Yu Chen (The University of Sydney)

11:50 → 12:50 MS09: 4.2

11:50 Pore scale characterization of dissolution process during CO2 injection in sandstones: an simulation study

Dissolution trapping is one of the crucial trapping mechanisms for geological carbon storage in deep saline aquifers. The injected supercritical CO2 (scCO2) flow and dissolution processes are coupled and interact with each other. Therefore, we performed direct numerical simulations in three-dimensional micro-CT images of sandstones using the volume of fluid and continuous species transfer method. We investigated the coupled scCO2 flow and dissolution processes at pore-scale under different rock structures, capillary numbers, and rock wettability conditions. The dynamic evolution of the scCO2/brine phase distribution and scCO2 concentration distribution occurring during the injection period were presented and analyzed. Complicated coupling mechanisms between scCO2-brine two-phase flow and interphase mass transfer were also revealed. Our results showed that the scCO2 dissolution was highly dependent on the local distribution of scCO2 clusters. The rock with relatively high porosity and permeability would have more capacity for scCO2 injection resulting in a faster and greater dissolution of scCO2 in brine. The effect of capillary number on the scCO2 dissolution process was related to the range of capillary number. Rock wettability was found to be another factor controlling the scCO2 dissolution process by affecting the scCO2-brine interfacial area. Our pore-scale study provides a deep understanding of the scCO2 dissolution trapping mechanism, which is important to enhance the prediction of sequestration risk and improve sequestration efficiency.

Speaker: Jinlei Wang

12:05 Role of micro-fractures on displacement of immiscible fluids in fractured porous media: a pore-scale perspective

Displacement of immiscible fluids in heterogeneous porous media is extensively found in many underground applications, such as groundwater remediation, underground hydrogen storage (UHS), and geological carbon storage (GCS). Natural fractures are widely distributed in the subsurface system and likely to induce a channeling effect that makes the flow within fractured porous media very distinct from that in conventional ones. In pursuit of enhanced displacement efficiencies in the aforementioned applications, the mechanisms of flow phenomena within fractured porous media needs to be better known by accounting of the channeling effect. Here, based on a numerical phase-field method (PFM), the spatial and temporal evolution of the phases and their interface during a multiphase flow in a fractured porous media are investigated under various fracture morphologies (i.e., aperture, length, dip angle, and tortuosity). The results show that the absolute permeability of the porous medium is all increased in the studied cases due to the presence of microfractures. This increase in permeability is largely attributed to the reduced fluid tortuosity in the flow direction. Yet the ultimate displacement efficiency shows a non-linear dependence on the absolute permeability. Micro-fractures serve as a main displacement pathway in view of the varying topology of the local pores, and thus play a key role in controlling the ultimate displacement efficiency. Among the above four characteristic parameters, aperture has the most significance in regulating the fluid displacement. The ultimate displacement efficiency reaches a maximum value (51.14%) as the aperture of the micro-fracture is twice the mean pore diameter and can be 1.2 times larger than that of the model without micro-fractures. The relative permeability of the displacing fluid, which is proportional to its saturation, shows a higher growth rate under presence of micro-fractures. It is also demonstrated that the ultimate displacement efficiency is negatively correlated to the growth rate of relative permeability.

Speaker: Zhennan He (Shandong University, Jinan)

12:20 Motion of a viscous slug on heterogeneous surfaces

We present a theoretical study of viscous slug motion inside a microscopically rough capillary tube, where pronounced stick–slip motion can emerge at slow displacement rates. The mathematical description of this intermittent motion can be reduced to a system of ordinary differential equations, which also describe the motion of a pendulum inside a fluid-filled rotating drum. We use this analogy to show that the stick–slip motion transitions to steady sliding at high displacement rates. We characterize this crossover with a simple scaling relation and show that the crossover is accompanied by a shift in the dominant energy dissipation mechanisms within the system.

Speaker: Bauyrzhan Primkulov (MIT)

12:35 Measuring (non)stationarity in porous media images and what it means for pore-scale simulations

The structures we obtain with, for example, X-ray tomography imaging and then use for pore-scale imaging actually says a lot about the applicability of obtained simulated results. For example, to utilize classical homogenization scheme and obtain continuum scale properties such as permeability, relative permeabilities and numerous others, one needs to establish representativity, which is equal to structural homogeneity of the sample [1]. While no natural sample is strictly stationary [2], we shall show that weak stationarity can be effectively established for the purpose of representativity through the analysis of images produced by stationary random processes. But where is that threshold between homogeneous and inhomogeneous structures and why is it important for pore-scale simulations?
The first question highlights the central problem of the blurred interface between heterogeneous and homogeneous, which also depends on the metrics used for its identification. Our results uncover the physics of structural stationarity quantification, based on correlation functions and clustering based on these functions different between image subregions [3]. By applying the methodology to a wide variety of synthetic and real images of binary porous media, we confirmed computationally that only periodically unit-celled structures and images produced by stationary processes with resolutions close to infinity are strictly stationary. Natural structures without recurring unit cells are only weakly stationary. We established a physically meaningful definition for these stationarity types and their distinction from nonstationarity. In addition, the importance of information content of the chosen metrics is highlighted and discussed [4].
In this presentation we shall focus on:
- Methodology to analyze the porous media images to establish their homogeneity;
- The importance of stationarity to establish REV;
- The crucial role of image analysis with structural metrics prior to any pore-scale simulations.
As we argue, the image analysis based on structural metrics is necessary prior pore-scale simulations. We discuss all the details to establish such an analysis protocol and lay down major methodological procedures.

Speaker: Kirill Gerke (RAS)

11:50 → 12:50 MS11: 4.2

11:50 Investigation of transport and deposition of micro-nano-bubbles in porous media using column test and microfluidics

Micro-nano-bubbles (MNBs) enhanced oxidation presents a sustainable approach for contaminated groundwater remediation. Understanding MNBs transport and deposition in porous media is crucial for application and optimizing this technology. Firstly, the relationship between the number of MNBs and dissolved oxygen (DO) concentration was calibrated to provide a basis for the investigation of MNBs’ migratory behaviors by employing DO concentration. Secondly, we developed a two-dimensional microfluidic model to simulate the pore structure of uniform-sized particles and directly observed the retention mechanisms of injected oxygen MNBs. The results indicated that MNBs retention predominantly occurs through surface deposition and hydrodynamic bridging, with no significant straining observed. Furthermore, we conducted one-dimensional column experiments using glass beads as porous media to examine the impact of porous media and groundwater chemical characteristics on MNB migration, deposition and re-mobilization. The findings revealed substantial MNB retention within the porous medium, with retention diminishing as the injection rate and glass bead size increased. Finally, the irregular quartz sand was employed in the column tests, which demonstrated a higher propensity for MNB capture comparing to uniformly-sized glass beads. Alterations in groundwater pH and salinity also influenced MNB migration by affecting the surface potential of both MNBs and the porous medium. In conclusion, this study provides a reference for further utilization of MNBs for remediation of contaminated groundwater.

Speaker: Yazhou Cao (Tsinghua University)

12:05 Microfluidic platform studying transport dynamics in weathering crust soil

Microfluidics provides an excellent technology for studying fluid flow and solute transport in porous media with high temporal-spatial resolution, making it possible to observe fluid movement in the pore network. However, microfluidic chips are typically composed of artificial materials such as polymer, silicon, and glass, with limited research incorporating natural samples. This has hindered the progress of microfluidics. This study introduces a new microfluidic platform that encapsulates natural soil samples of weathering crust. By utilizing an inverted microscope, flow and transport dynamics in the natural soil were observed at the pore-scale with varying levels of saturation. As saturation increased, the fluid moved more easily through the pore network, and the solution diffused more rapidly. This newly developed microfluidic platform enables researchers to reveal complex transport dynamics in natural media.

Speaker: Enhao Liu (Guangzhou Institute of Geochemistry, Chinese Academy of Sciences)

12:20 Approach for void space reconstruction on a microchip based on the lithological and mineralogical data

Tight gas reservoirs are the subject of interest to many researchers because of the large oil and gas deposits concentrated in them. These low porosity and permeability sandstone reservoirs are widespread worldwide. Enhanced oil recovery methods are widely used in the industrial development of such deposits. These methods require numerous preliminary coreflooding experiments on rock samples, which are expensive and, in many cases, impossible to perform, having only one sample because coreflooding tests almost always consist of multiple steps.
Therefore, we assume replacing the structure of a real core void space with a similar artificially created geometry inside a silicon microfluidic chip that can be used many times in flooding experiments without damaging the core-prototype sample. However, it is crucial to take into account such parameters as wettability, pore size, pore distribution, length, width, and tortuosity of pore channels, et al. A special role in studying such parameters is always assigned to the relationship between the lithological and mineralogical characteristics of the rock with its structure of the void space according to microtomography (MCT) data.
The current research aims to identify features of the mineral matrix of studied tight gas sandstone reservoirs, which most intensively influenced the void space structure. The study represents preliminary work before conducting flooding tests on microfluidic chips with heterogeneous wettability to limit water inflow. We have used such methods as MCT data, lithological study rocks in cross-sections, X-ray diffraction analysis, grain-size analysis, and mineralogical composition by scanning electronic microscopy. As a result of current studies, we have determined that all rocks with different permeabilities have almost the same mineralogical composition. The difference is that the mineral matrix of rocks with low permeability has a higher content of secondary calcite minerals. Most of the macropores (>2 µm) identified by MCT data were caused by secondary leaching of plagioclases. Most of the microporosity (<2 µm) is associated with clayey chlorite cement. Primary porosity is almost entirely replaced by secondary silicification due to the intense secondary transformation of sandstones.
The second part of the current study was dedicated to the creation of void space structures in microfluidic chips using the complex of lithological, mineralogical, and, to a greater extent, MC data. We have developed a new method of creating an artificial pore structure of microfluidic chips that retains a large number of properties of the original core when moving from 3D to 2D structures. Moreover, using mineralogical data, we developed a model of heterogeneous wettability of void space in microfluidic chips to repeat the wettability in natural reservoir rocks. We assumed the model with hydrophobic macropore space and hydrophilic micropores because of the capillarity forces that retain water in smaller pores.
In conclusion, current research gave us complete information about mineralogy and the void space geometry of the core samples from the studied tight gas reservoirs. With these data, we could extrapolate future results of microfluidic tests to nearby tight gas sandstones with the same mineralogical composition.

Speaker: Margarita Latypova (LABADVANCE LLC, Lomonosov Moscow State University (Geological Faculty))

12:35 Novel Microfluidic Experiments Of Investigating Permeability Impairment due to Clogging in Rough Fractures

Fractures commonly compromise rock integrity, emerging as a primary factor in leakage within CO₂ geological storage. Injecting CO₂ into deep saline formations often induces salt precipitation (Evaporation-induced) and mineral precipitation (Chemically-induced), leading to the obstruction of fractures and impairment of reservoir permeability. To assess these effects, we devised a novel microfluidic fracture model using PMMA and rough glass. Two distinct precipitation experiments were conducted: 1) Dry CO₂ is injected at different flow rates into a brine-filled microfluidic model to address the progression of salt precipitation induced by evaporation. 2)Na₂CO₃ and CaCl₂ are concurrently injected at different flow rates into the microfluidic fracture model to prompt mineral precipitation. Utilizing confocal laser scanning microscopy, we identified two salt precipitation modes: large bulk salt crystals and polycrystalline structures. Large bulk salt crystals lead to complete clogging, markedly diminishing fracture permeability. Flow velocity significantly influences the precipitation pattern of mineral precipitation. At high velocity, a more constricted barrier is observed, restricting mixing and reactive transport. Conversely, at low velocity, a broader precipitation zone formed, significantly reducing fracture permeability. This study enhances our comprehension of the blocking behavior of two distinct precipitation in fractures during the CO₂ geological storage.

Speaker: Xusheng Chen (State Key Laboratory of Water Resources Engineering and Management, Wuhan University, Wuhan 430072, China)

11:50 → 12:50 MS15: 4.2

11:50 Anchored Physics-Informed Neural Network for Fluid Flow Simulation in Heterogeneous Porous Media

Numerical simulation is a vital tool for analyzing and predicting fluid flow in porous media. Physics-Informed Neural Networks (PINNs) can work out systems of partial differential equations (PDEs) by leveraging the universal approximation ability of Neural Network (NN), offering a novel approach for numerical model solving. However, current PINN-based methods are rarely used to simulate heterogeneous problems, especially in the coordinate-to-pressure mapping, where the training is challenging and the output accuracy is insufficient. In this work, we propose an Anchored Physics-Informed Neural Network (A-PINN) to tackle these problems involving complex physical backgrounds. Specifically, heterogeneous permeability fields are generated by Stanford Geostatistical Modeling Software (SGeMS). Boundary conditions are incorporated into the training process as hard constraints. The loss function is constructed by Finite Volume Method (FVM), which fixes the sampling points and eliminates the need for labeled data. We innovatively design an Adjacency-Location Anchoring(ALA) structure, which enhances the network interpretability by incorporating physical significance into the NN. Additionally, the ALA possess regularization ability during the updating of network parameters. Finally, we simulate multiple heterogeneous reservoirs to verify the superiority of A-PINN in solving complex problems. The new method can achieve sufficient accuracy and significantly improve the training speed.

Speaker: Jingqi Lin (China University of Petroleum(East China))

12:05 A Transformer-based framework for brine-gas interfacial tension prediction: Implications for H2, CH4 and CO2 geo-storage

Brine-gas interfacial tension (γ) is an essential parameter to determine fluid dynamics, trapping and distributions at pore-scale, thus influencing gas storage capacities and securities at reservoir-scale. However, γ is a complex function of pressure, temperature, ionic strength and gas composition, thus very time-consuming and costly to cover all these influencing factors by experiment. Therefore herein, a machine learning workflow is established to predict γ accurately and and develop a mathematical prediction model under various gas (H2, CH4 and CO2) geo-storage scenarios.
First, three types of gases (namely H2, CH4 and CO2) were encoded based on their molecular weight. Then, γ and its influencing factors were input into the dataset (total 300 data points were collected, and the ratio of the training to the testing dataset is 8 : 2). Next, the advanced Transformer model was used to predict γ with the determination coefficient (R2) to evaluate the prediction accuracy. Finally, an accurate γ prediction correlation is derived as a function of pressure, temperature, ionic strength and gas composition.
The prediction results have shown that:
1) The prediction precision is high with (R2>0.8);
2) under typical gas geo-storage conditions, γ magnitudes follow the order H2 > CH4 > CO2, e.g., γ is 68 mN/m, 62 mN/m, and 27 mN/m respectively at 10 MPa and 50 ºC for these three gases;
3) For a representative H2 geo-storage scenario with CO2 as cushion gas, γ for the H2 and CO2 mixture is smaller than that for H2, while larger than that for CO2, which is attributed to various intermolecular forces for various gas compositions;
4) γ decreases with increasing pressure and temperature, while γ does not have a monotonous relationship with I, quantitatively consistent with experimental observations.
To our best knowledge, this is the first time to introduce a robust Transformer-based formula generation framework and develop a mathematical model for cost-effective prediction of γ under a wide range of gas geo-storage conditions. These insights will promote energy transition, balance energy supply – demand and reduce carbon emissions.

Speaker: Tianru Song (University of Science and Technology Beijing)

12:20 Machine learning algorithms for predicting breakthrough curves for pore scale reactive flow in porous media and application to parameter identification

Reactive flows in porous media play an important role in our life and are crucial for many industrial, environmental and biomedical applications. Very often the concentration of the species at the inlet is known, and the so-called breakthrough curves, namely the time dependent concentration at the outlet, are the quantities which could be measured or computed numerically. The measurements and the simulations could be time-consuming and expensive, and machine learning and Big Data approaches can help to predict breakthrough curves at lower costs. Machine learning (ML) methods, such as Gaussian processes and fully-connected neural networks, and a tensor method, cross approximation, are well suited for predicting breakthrough curves.
In this presentation we discuss species transport with homogeneous or heterogeneous reactions for flow in porous media. The discussed ML methods are applicable for a broad class of single phase and multiphase, pore scale or Darcy scale reactive flows. Here we illustrate our developments in the case of pore scale single phase flow. The transport of species is modeled by a convection-diffusion equation, the flow is described by incompressible Stokes or Navier-Stokes equations. The surface kinetics is included via Robin boundary conditions in the case of heterogeneous reaction, or via source term in the case of homogeneous reaction. We present results on predicting breakthrough curves using the above approaches. Next, we discuss the application of the developed algorithms for deriving surrogate models to be used for solving parameter identification problems. We are interested in identifying the reaction coefficients, i.e. solving inverse problem. Solving inverse problem requires solving the direct problem many times (e.g. thousands). Replacing numerical solution of the problem by a machine learning model significantly speeds up the computational times. We use a number of numerical solutions to train the machine learning model and then use them to generate new curves, required to identify the parameters.

Speaker: Prof. Oleg Iliev (Fraunhofer ITWM)

12:35 Effect discussion and workflow establishment of machine learning algorithm in logging classification: A case study from the classification of sepiolite bearing strata in the first member of Maokou Formation

The carbonate reservoir in the first member of Maokou Formation (Maokou-1 Member) of Middle Permian in Sichuan Basin have the characteristics of self-generating and, self-storage. Maokou-1 Member is expected to become a new field of unconventional gas reservoir exploration in carbonate rocks. The organic matter and pore development of Maokou-1 Member carbonate rocks are closely related to sepiolite bearing strata. Aiming to predict the sepiolite bearing strata from logging data, with core observation, microscopic analysis, XRD analysis. After sensitivity analysis, CNL, DEN, GR, RT, RXO and AC logging curves are selected as features. To overcome the imbalance among different features, this work introduces SMOTE algorithm. Comparison of classification and content prediction for sepiolite bearing strata among CatBoost, XGBoost, LightGBM, random forest and ANN models indicates CatBoost has good performance in binary and multi classification and XGBoost has a good performance in the regression. The prediction process of sepiolite bearing strata is put forward. The prediction process of sepiolite bearing strata is as follows: (1) Binary classification via CatBoost to judge the existence of sepiolite bearing strata; (2) Multi classification via Catboost to discriminate the type of sepiolite bearing strata; (3) Regression via XGBoost to predict the talc content; (4) Using talc content to calculate effective thickness of sepiolite bearing strata in different types.

Speaker: 杉 任

11:50 → 12:50 MS17: 4.2

11:50 Investigation of the Effect of Thermal Stresses on Hydraulic Fracturing in Geothermal Reservoirs

Geothermal energy has been widely proposed as a potential green energy resource to replace traditional fossil fuels. The most ubiquitous form of geothermal energy is found in hot dry rocks which are usually composed of granite (or other types of volcanic rocks) with very low permeability and are developed as enhanced geothermal systems (EGS). Hydraulic fracturing is a powerful technology to increase the permeability, enhance the water – rock contact and maximize the economic potential of EGS.
Due to the high cost associated with hydraulic fracturing operations, it is important to build reliable tools for predicting how the formation will respond to water injection. Numerical modeling of hydraulic fractures is an important method for studying fracture parameters such as length, width and fluid leak-off. In enhanced geothermal systems, the typical temperature difference between the reservoir and the injected fluid can range from 200◦C to 300◦C. As a result, the injected fluid rapidly cools down the near wellbore area and the resulting thermal contraction generates thermal tensile stress. This stress reduces fracture breakdown and extension pressure. Increase in injectivity near injection wells resulting from thermal contraction has been reported by researchers [1, 2] at the beginning of the injection process.
Hydraulic fracturing is widely used for improving permeability in hydrocarbon reservoirs [3], hazardous solid waste disposal [4, 5], for leaching processes and fault reactivation in mining [6], and soil and groundwater remediation [7] as well. The studies have shown that even for such non-geothermal applications, cryogenic effects help to reduce the water consumption, formation damage, and the environmental impact of water-based fracturing [8].
Modeling of thermal stresses in hydraulic fracturing requires coupling of hydro-thermal physics with fracture mechanics. In this study, a more accessible method than developing a complex finite element code for this purpose has been proposed. Hydraulic fracturing was modelled by creating a three-dimensional model using Abaqus software, and thermal effects were incorporated using heat-sink boundary conditions. The results were validated against analytical and experimental studies. Investigation of the influence of thermal properties of rock and the hydraulic fracturing design parameters, on fracture geometry and pressure showed that the temperature difference between rock and injected fluid, thermal expansion coefficient of rock, and thermal conductivity of rock are the most significant factors in defining hydraulic fractures’ geometry and fracking pressure in geothermal reservoirs. In general, hydraulic fractures exhibit greater opening and less extension under thermal stresses compared to non-thermal fracturing processes.

Speaker: Mozhdeh Sajjadi (Assistant Professor, Institute of Petroleum Engineering, School of Chemical Engineering, College of Engineering, University of Tehran)

12:05 A three-dimensional reservoir-scale Thermal-Hydrological-Mechanical model of enhanced geothermal systems

The heat energy resource in the deep earth (3 ∼10 km), which is carried by Hot Dry Rocks (HDR), has a huge capacity for geothermal power generation. As a type of conductive geothermal energy, HDR has low rock permeability, so that Enhanced/Engineered Geothermal System (EGS) is developed to artificially increase the heat exchange area and further extract the deep geothermal energy with the connected natural fractures and hydraulic stimulated fracture network. The coupled Thermal-Hydrological-Mechanical (THM) processes largely control the heat recovery efficiency from HDR, and thus real 3D reservoir scale investigations that account for the multiphysics coupling mechanisms are needed to inform geothermal energy recovery from HDR.

In this work, we built a three-dimensional THM model for the EGS of Qiabuqia HDR (Zhang et al. 2018, Gonghe Basin, China) by taking advantage of the novel simulation framework, GEOSX (Settgast et al. 2022). As a rapidly growing open-source multi-physics simulator, GEOSX has highly scalable algorithms for solving complex fluid flow, thermal, and geomechanical coupled systems. Preliminary geological data of the target area has been acquired by exploratory wells (e.g., GR1, GR2, DR3, DR4). There is also a trial production well GH-01. In our model, we considered a dual-well utilization system. Our 3D model focuses on reservoir-scale THM coupling, and takes into consideration the geostress directions in configuring the faults and (hydraulic)fractures, which are explicitly handled with EDFM (Embedded Discrete Fracture Model) method. The simulated results of heat recovery efficiency under different production scenarios provide guidance information for engineering practices.

Speaker: Tingting Liu (Department of Energy & Resources Engineering, Peking University)

12:20 Temperature evolution law of mining coal seam in gas desorption process

In order to study the influence of coal desorption of gas heat effect and non-uniform boundary load on the temperature evolution law of coal and gas protrusion gestation process, we constructed the coal and gas heat-fluid-solid coupling model containing desorption of heat and carried out numerical simulation research. The study shows that: when considering the effect of desorption heat, the temperature changes in the stress elevation area, stress concentration area and stress unloading area have obvious stage changes, which can be divided into the pre-growth period, the middle period and the late period according to the rule of change. However, when the desorption heat effect is not considered, only the early and late stages of incubation exist; the effect of desorption heat promotes the temperature reduction of the coal body close to the working face, and inhibits the temperature reduction of the coal body far away from the working face; the non-uniform loading causes the temperature evolution of coal and gas protrusion process. The non-uniform loading causes the temperature in the stress concentration area of the coal seam to increase, and the value increases with the increase of the peak stress coefficient; the temperature drop of the coal seam decreases with the increase of the peak stress coefficient; heat convection and heat conduction are the main modes of temperature transfer in the coal seam; the non-uniform loading causes the pore space of the coal seam to be tightly closed, so that the process of heat convection is blocked, while heat conduction is not easy to be affected. The results of the study clearly understand the influence of heat-absorption effect on the temperature of coal seams under the influence of mining stress, explain the reasons for the temperature changes in different stress zones of coal seams, and provide a reference for the research in the area of early warning of coal and gas protrusion.

Speaker: Mr Wenlu Zhang (Liaoning Technical University)

13:50 → 15:05 MS01: 4.3

13:50 Minimum miscibility pressure determination in confined nanopores considering the presence of the second liquid phase

In recent years, tight and shale reservoirs have become increasingly significant in global oil and gas production. However, the recovery efficiency from these reservoirs remains low, with a substantial portion of shale oil left unrecovered. CO2 flooding has emerged as a leading method for enhanced oil recovery (EOR) in these environments, offering both improved oil extraction and opportunities for Carbon Capture, Utilization, and Storage (CCUS), which could help mitigate global warming. A common characteristic of such reservoirs is the prevalence of nano-scale pores. Accurately predicting the Minimum Miscibility Pressure (MMP) of oil and CO2 is vital for the successful implementation of CO2 injection strategies in unconventional reservoirs. However, existing MMP prediction methods are primarily developed for bulk conditions and fail to accurately predict MMP in the nanopores common in tight/shale reservoirs. Furthermore, modeling the oil-CO2 MMP in shale reservoirs is complicated by the frequent occurrence of vapor-liquid-liquid (VL1L2) three-phase equilibria, where the L1 phase represents the heavier liquid phase, and the lighter liquid phase (L2) contains a significant amount of gaseous solvents. The presence of this second liquid phase can significantly affect oil recovery efficiency and CO2 storage capacity due to changes in relative permeability curves and MMP values.
This paper presents the development of a comprehensive thermodynamic model that more accurately describes oil-CO2 MMP profiles in tight/shale reservoirs, taking into account the presence of the second liquid phase. A novel MMP calculation algorithm, based on the MMC algorithm, is introduced, incorporating the effects of capillarity, confinement, and the second liquid phase. Example calculations demonstrate the effectiveness and the robustness of the proposed algorithm. The results indicate that the confined oil-CO2 MMP decreases with diminishing pore radius, a trend more pronounced in smaller pores. Beyond a pore radius of 10 nm, the confined MMP becomes less sensitive to radius changes. Additionally, for each pore radius, the confined oil-CO2 MMP initially increases then decreases with rising temperature, suggesting a maximum MMP at a specific temperature. There is also a maximum confined MMP for each pore radius at the given temperature, which decreases with smaller pore radius. Additionally, the calculated MMPs considering the presence of the second liquid phase is larger than that without this consideration.

Speaker: Zhuo Chen (University of Alberta)

14:05 A Bayesian deep-learning approach to characterize CO2-brine saturation functions from experimental data

An efficient management of a CO2 storage site requires an uncertainty assessment for storage capacity and injectivity. For the case of a saline aquifer onshore Denmark, an unsteady-state core-flooding experiment was conducted in order to assess a potential risk of CO2 injectivity impairment. The experimental results indicate that the rock mineralogy, samples permeability, and samples dimensions were essentially unaffected by CO2 flooding, but precipitated salt and some fines were detected after the end of experiment.

The experimentally obtained differential pressure readings and the brine effluent volume are history-matched to estimate the uncertainty range of the saturation functions for the two-phase water-scCO2 system. The Brooks-Corey (1964) parametrization is used for the relative permeability functions, and the Skjaeveland et al. (1998) parametrization – for the capillary pressure function. The fluid system is modelled with the Peng-Robinson equation of state for the aqueous phase with CO2 dissolution, geochemical reactions, and with salt precipitation. An implementation of this model with a commercial simulator GEM (CMG, 2022) appears to be computationally expensive for multiple forward solutions; a faster simplified two-phase immiscible model, built using MRST (Lie, 2019), is used as a proxy to the full model.

A global search method with multiple starting guesses is used to obtain a number of non-unique solutions to the inverse problem using the MRST model. However, the used forward solver is prohibitively slow for a Bayesian uncertainty quantification of the problem at hand.

A feedforward neural network is set up to approximate the mapping between the tuples of Brooks-Corey-Skjaeveland parameters and the values of the residual between the experimental results and the MRST predictions. The neural network, trained on the convergence history of the global search method, reaches good accuracy overall with Pearson’s correlation coefficient up to 0.99 and several orders of magnitude speedup as compared to the forward solver run time.

The history-matched values of the optimization parameters are interpreted as samples of a Gaussian prior distribution. It is shown that the parameters of the capillary function are subject to larger uncertainty, as compared to the parameters of the relative permeabilities. The posterior distribution is obtained by evaluating the joint distribution for small values of the residual. Using the neural network as a forward problem solver allows to sample the posterior distribution and to obtain the maximum a posteriori estimation of the sought optimization parameters.

Speaker: Nikolai Andrianov (Geological Survey of Denmark and Greenland (GEUS))

14:20 Optimization of porous structures via machine learning for solar thermochemical fuel production

Optimization of the porous structure is essential to achieve high solar-to-fuel efficiency in solar thermochemical fuel production. The porous structure directly converts concentrated solar radiation into heat and facilitates heat and mass transfer, as well as provides sites for chemical reactions. An ideal porous structure is expected to have a large surface area to provide reactive sites, a large mass loading to provide reactants, a small pressure drop in fluid space to facilitate gaseous mass transfer, and uniform solar energy absorption to guarantee thermo-mechanical stability. These optimization objectives demand a comprehensive understanding of the transport and conversion processes in porous structures. The direct 3D multiphysics model based on real morphology is time-consuming and costly to solve. Its further coupling to a conventional optimization algorithm, such as the gradient descent method for structure optimization, is challenging. The triply periodic minimum surface (TPMS) structures are known for their well-defined mathematically controllable morphology and designing flexibility, providing great easiness in structure optimization, so they are introduced into the optimization. In this study, we introduced a machine learning-aided porous structure optimization method for solar thermochemical fuel production. The machine learning tool was used to link the TPMS structures' design parameters with the fuel production performance, temperature gradient, and gaseous flow pressure drop. The training data were calculated from a direct pore-level multiphysics model with various uniform and gradient 3D TPMS structures. The reaction model in this study considered both charge carriers' bulk diffusion and surface reactions, enabling the investigation of the material's kinetics on fuel production performance. The model framework can hence be utilized for porous structure optimization as well as guiding material choices for high-performing solar thermochemical fuel generation.

Speaker: Dr Da Xu (Department of Mechanical and Energy Engineering, Southern University of Science and Technology)

14:35 Structure and Properties of 316L Sinter Paper for Use as Gas Diffusion Layer in PEM Fuel Cell Applications

A manufacturing process derived from paper technology can be used to produce a flat porous metallic material. To this end, organic fibers, fillers and additives are mixed with metal powder and the pulp is subsequently processed on a paper making machine. The so-called green paper is then subjected to a heat treatment where the organic components are removed. After that, the remaining sheets are sintered at temperatures close to the melting point of the metal powder, resulting in a purely metallic porous material, the so-called sinter paper. This approach has been used for the development of an innovative Gas Diffusion Layer (GDL) for mobile fuel cells. GDLs are situated between the bipolar plate and the electrode inside the fuel cell stack. They ensure optimal gas distribution as well as the removal of water, heat and electricity and have therefore to comply with complex requirements with regard to electrical conductivity, mechanical properties, as well as wetting behavior and fluid flow properties.
So far, metallic sinter paper that meets the materials specification of stainless steel 316L could be made. The thickness of the paper is around 200 µm, and the porosity of the base material reaches values of approximately 60 %. A thorough morphological characterization was carried out based on high-resolution µCT scans and analyzed via the software package GeoDict. Measured and calculated values of the electrical and heat conductivity have been compared and first measurements of the electrochemical performance in a single-cell test bench have been carried out.

Speaker: Olaf Andersen (Fraunhofer IFAM Dresden)

14:50 Dynamic separation of CO2 from N2 using alkali-metal forms of nanosized chabazite

Due to the rising atmospheric concentration of CO2 from human activities, the separation of CO2 from N2, commonly referred to as flue gas, has become a crucial priority.[1] There are four prevalent technologies used for CO2 capture: (i) adsorption with amine-based solvents, (ii) adsorption by nanoporous solids, (iii) cryogenic distillation, and (iv) membrane separation. Zeolites, among the materials considered for CO2 adsorption, offer the advantage of being inorganic, non-toxic substances with high thermal stability and selectivity, which can be adjusted by their framework structure and chemical composition.[1] Moreover, recent findings indicate that zeolites exhibit flexible structures.[2] This flexibility in zeolites is observable as a response to the adsorption or desorption of guest molecules. It can manifest as changes in the zeolite lattice parameters (framework dynamics) or by the relocation of extra-framework cations within zeolite pores (extra-framework dynamics).[1,2] Traditional zeolites face diffusion limitations of guest molecules through their pore networks due to their typical existence as micron-sized polycrystalline powders.[3] To overcome these limitations, various methods have been developed to increase the surface area/volume ratio. Among these approaches, nanozeolites consisting of discrete nanoparticles that result in a greater external surface area and a higher number of available active sites.[3]
We have successfully demonstrated the outstanding CO2 capture capabilities of nanosized chabazite (CHA) zeolites in various alkali forms (Na+, K+, and Cs+).[1,3,4] In this study, we initially estimated CO2 and N2 equilibrium adsorption isotherms through Grand Canonical Monte Carlo (GCMC) calculations at 298 K. Subsequently, utilizing molecular dynamics simulations, we determined the self-diffusivities of CO2 molecules at different loadings for various CHA nanocrystals. The experimental validation of dynamic CO2/N2 separation was conducted through breakthrough measurements, simulating a 17/83 (CO2/N2) mixed-component gas mixture package at 298 K (molar basis).
Based on the breakthrough results, we obtained dynamic saturation CO2 loadings of 2.48, 1.72, and 0.57 mmol g-1 for Na-CHA, K-CHA, and Cs-CHA nanosized zeolites, respectively, with CO2/N2 molar selectivity at saturation of 62, 46, and 23. Comparing the nanosized (60 nm) Cs-CHA zeolite with its micron-sized (3 μm) counterpart, we observed significantly faster CO2 breakthrough kinetics for the nanosized Cs-CHA zeolite. Ultimately, this accelerated kinetic behavior led to a remarkable over 150% improvement in dynamic CO2 removal.
In summary, different alkali forms of nanosized CHA zeolites prove to be exceptional materials for effectively separating CO2 from N2.

Acknowledgments: The support of the Centre for Zeolites and Nanoporous Materials, Label of Excellence, Normandy Region (CLEAR). IRN Zeolites and TotalEnergies is acknowledged.

Speaker: Dr Sajjad Ghojavand (LCS, ENSICAEN)

13:50 → 15:05 MS03: 4.3

13:50 A Darcy‐Brinkman‐Stokes Approach to Modeling Microbially Induced Calcium Carbonate Precipitation in Porous and Fractured Media

Microbially induced calcium carbonate precipitation (MICP) is an eco-friendly solution in geotechnical engineering, particularly for applications in bioremediation and $CO_{2}$ sequestration. Mathematical models have been developed to describe coupled biochemical processes in geological media. However, there is a lack of numerical methods capable of modeling MICP directly from a single set of equations, which poses challenges on practical engineering applications. In this paper, we developed a pore-scale numerical solver, MICPFOAM, using a unified framework based on the Darcy-Brinkman-Stokes equation for simulating MICP in both porous and fractured media. The solver is implemented based on the OpenFOAM environment. We then validated our model in two systems, i.e., a flow system and a reaction system. Results demonstrated that MICP was significantly slower in fractured media than in porous media because of the preferential flow. In the reaction-diffusion system, strong diffusion ($D=10^{-6}$) drove MICP far from equilibrium, while fast precipitation ($K_{p}=10^{-2}$) combined with low ureolysis ($K_{u}=10^{-5}$) promoted MICP to reach equilibrium. The initial biomass distribution is able to determine the occurrence of MICP, while biomass density only affects the amount of $CaCO_{3}$ after reaching equilibrium. Our model facilitates the coupling of biogeochemical properties in typical porous and fractured media, offering an applicable framework to model versatile processes and providing optimal conditions for potential MICP applications.

Speaker: Ms Xueying Li

14:05 A pore-scale investigation of dispersion in two-phase flow with varied viscosity contrast in porous media

Dispersion in partially saturated porous media has many applications in scientific and engineering fields. For example, in carbon dioxide capture and storage (CCS), dispersion increases the mass transfer rate and accelerates the dissolution process in large background velocity field (Tsinober, 2022). In this study, we create a steady-state system that mimics a depleted oil field where salty water and oil co-exist. A tracer cloud is injected into a cylindrical container where sands are densely packed, representing a supercritical CO2 cloud that can mix with the surrounding water in a porous media. The impact of oil viscosity on dispersion behaviors was investigated in a large range of viscosity contrast of non-wetting phase and wetting phase from 0.65 to 500.
The results inform dispersion scale was drastically extended with the increase of viscosity contrast. An increase in viscosity contrast yields more heterogeneities of the local velocity field generated by trapped oil with a wide variation of its volumes. The local heterogeneity causes surface distortions and increases the interfacial area of the tracer cloud and surrounding brine water. The dispersion coefficients vary with time and exhibit abnormal behaviors, especially when the oil viscosity is large.
These results can be attributed to the fact that the oil phase becomes disconnected, and the volume of trapped oil decreases as the oil viscosity increases (Suwandi et al., 2022). An oil film is observed, where oil is sandwiched by sand and water and narrows pore spaces. The velocity of the water phase exhibits an extensive range of fluctuation, which may contribute to the enhanced dispersion and mixing state, even with the low connectivity of the water phase.
This study provides insights into dispersion in porous media where oil and water co-exist with varied oil viscosities at both the large and pore scales, which may provide an insight into the storage condition of CO2 in partially saturated porous media (Li, 2022).

Speaker: Zijing LI (Tokyo Institute of Technology)

16MS03_524_LIZijing.pptx

14:20 Effective Characterization of Fractured Media with PEDL: A Deep Learning-Based Data Assimilation Approach

In various research fields such as hydrogeology, environmental science and energy engineering, geological formations with fractures are frequently encountered. Accurately characterizing these fractured media is of paramount importance when it comes to tasks that demand precise predictions of liquid flow and the transport of solute and energy within them. Since directly measuring fractured media poses inherent challenges, data assimilation (DA) techniques are typically employed to derive inverse estimates of media properties using observed state variables like hydraulic head, concentration, and temperature. Nonetheless, the considerable difficulties arising from the strong heterogeneity and non-Gaussian nature of fractured media have diminished the effectiveness of existing DA methods. In this study, we formulate a novel DA approach known as PEDL (parameter estimator with deep learning) that harnesses the capabilities of DL to capture nonlinear relationships and extract non-Gaussian features. To evaluate PEDL's performance, we conduct two numerical case studies with increasing complexity. Our results clearly demonstrate that PEDL outperforms three popular DA methods: ensemble smoother with multiple DA (ESMDA), iterative local updating ES (ILUES), and ES with DL-based update (ESDL). Sensitivity analyses con?firm PEDL's validity and adaptability across various ensemble sizes and DL model architectures. Moreover, even in scenarios where structural difference exists between the accurate reference model and the simplifi?ed forecast model, PEDL adeptly identi?es the primary characteristics of fracture networks.

Speaker: Prof. Tongchao Nan (Hohai University)

14:35 Pore-scale Modeling of Two-Phase Fluid Flow in the Fracturing-Shut In-Flowback Process of Tight Oil Reservoirs

The storage space of tight formation after volumetric fracturing is complex, characterized by the coexistence of micro-nano pores and multi-scale fractures. This complexity hinders a clear understanding of pore-scale flow dynamics in the integrated fracturing-shut in-flowback process of tight oil reservoir. To tackle this issue, we introduced the micro-focus CT imaging and digital image processing technology to establish two digital rock geometry models retrieved from raw CT images. Subsequently, we proposed a pore-scale modeling workflow based on the pseudo- potential lattice Boltzmann model to explore the underlying mechanism of fluid exchange during the integrated development period. This workflow allowed us to investigate the oil-water exchange behaviors during the three stages of fracturing-driven, shut-in imbibition and flowback production. Ultimately, we conducted a systematic analysis of the influence of oil-water viscosity ratio, rock wetting angle and capillary number on the pore-scale oil-water exchange. Results show that during the fracturing-driven stage, fracturing fluid primarily migrates along the fractures, with only a small amount entering the pore space nearby the fractures. In the shut-in imbibition stage, the fracturing fluid preferentially flows into small pores, displacing the recovered oil droplets through the large pores. In the flowback production stage, oil droplets occupied in the fracture-matrix contact areas are preferentially stripped off, and there still exists a large amount of crude oil droplets that are difficult to be swept. A higher capillary number and a lower oil-water viscosity ratio will supply formation energy during hydraulic fracturing in tight oil reservoirs, activating the mobilization of crude oil droplet trapped in the stimulated reservoir volume region and improving imbibition recovery. The effect of wetting angle on energy supply during hydraulic fracturing in tight oil reservoirs is relatively little, while a higher water-wet degree will promote spontaneous imbibition, making it challenging for fracturing fluid to flowback.

Speaker: Fangzhou Liu (China University of Petroleum-Beijing)

13:50 → 15:05 MS09: 4.3

13:50 Pore-scale Flow Simulation of CO2 Sequestration in Deep Shale Based on Thermal-hydro-mechanical Coupled Model

The technology of sequestering CO2 in deep shale has shown great potential due to the low permeability of shale and the high adsorption of CO2 by organic-rich characteristics. Deep shale is characterized by high-temperature and high-pressure with a significant hydro-mechanical coupling effect. The Darcy-Brinkman-Stokes method was integrated with heat transfer equations to simulate thermal-hydro-mechanical coupled single-phase steady-state flow, combined with multiphase flow equations to simulate hydro-mechanical coupled transient flow under high-temperature conditions. This study aims to reveal the effect of temperature difference between CO2 and reservoir, Reynolds number, and formation pressure on the flow process of CO2 geological storage in deep shale based on the constructed real core structure consisting of organic pore, organic matter, and inorganic matter. The results indicate that low-temperature CO2 is conducive to giving full play to the role of convection heat transfer, improving the CO2 saturation and the swept volume of organic pores. Reynolds number has a negligible impact on the transition of convective and conduction heat transfer. At higher Reynolds numbers, CO2 flows extensively and deeply, and CO2 clusters occupy a higher proportion in organic pores. The Nusselt number is higher, and convective heat transfer is more dominant under lower confining pressure. Shallower reservoirs are favorable conditions for adsorption trapping, as their cores are subjected to slightly lower confining pressure, resulting in higher CO2 saturation in the organic matter and higher sweep rate of organic pores. Our main finding is that low-temperature CO2, a higher Reynolds number and shallower buried depth favor carbon sequestration.

Speaker: Ziwei Liu (China University of Petroleum, East China)

14:05 Regularization strategies to improve the numerical efficiency of a fully-implicit pore-network model

Porous media coupled with free-flow systems are prevalent in both natural and technical applications. A classic example of such systems in the nature is the interaction between wind and partly saturated soil, leading to soil drying through evaporation. In fuel cells, as an example of technical applications, the understanding of interface process between the free flow (gas distributor channel) and the porous medium (gas diffusion layer) is crucial for optimizing fuel cell performance. In order to simulate these strongly non-linear coupled systems, efficient, monolithic model concepts are required.
Pore-network model (PNM) has been proven to be an efficient tool to capture pore-scale phenomena. Through simplified representation of porous media geometry, a pore-network model describes the porous medium as large void spaces, pore bodies, connected by narrow paths, pore throats. In this work, we focus on the fully implicit pore-network model and discuss the related modeling and numerical challenges. A central concern in this type of pore-network models is dealing with the discontinuity in local conductivity of fluid phases due to displacement processes, i.e., invasion and snap-off, in the pore throat, which causes numerical convergence issues during simulation. To tackle this issue, we first propose regularization strategies to smoothen the local conductivity curve. In addition, we introduce a generalized flux function formulation using a Heaviside function to scale the flux within a pore-throat with a factor parameter. We analyze the impact of employing the aforementioned approaches on the numerical efficiency and accuracy of the fully-implicit pore-network model. Finally, we show that the further development of our PNM allows simulating porous media coupled with free-flow systems.

Speaker: Hanchuan WU

14:20 An Improved MCMP Pseudopotential Model for Immiscible Fluids Flow in Porous Media

Extreme viscosity ratios emerge in many important applications such as carbon dioxide geological sequestration (CO2 is much less viscous than formation fluids), natural gas production and hydrogen storage (gas is much less viscous than water), and heavy oil reservoir recovery (oil is much more viscous than water). Clearly understanding the immiscible two-phase flow with extreme viscosity ratio can provide guidance for practical production.
Lattice Boltzmann method (LBM) has recently been widely applied for numerical simulation of pore-scale two-phase flow. However, prior LBM approaches on two phase porous media flow [1-4] present major limitation in modeling extreme viscosity ratio and low capillary number. It mainly stems from the large spurious currents[5,6] when dealing with multiphase flow problems in complex media due to insufficient isotropic, which results in poor stability and accuracy of the prevailing multiphase LB model. Consequently, genuine flow velocities, particularly under conditions of low capillary numbers or high viscosity ratios, become tainted with these unwarranted velocities. Such interferences significantly hinder a comprehensive understanding of two-phase flow mechanisms within porous media.
To address this challenge, we integrate interaction forces using a higher-order difference approach[7], building upon Porter et al.'s multi-relaxation MCMP pseudopotential model[8] with an explicit forcing format. Our findings point that adjustable parameters related to the non-conserved quantities within the multi-relaxation matrix offer a distinct advantage in diminishing spurious currents. Furthermore, by employing the color gradient model for the diffusive mixing of two-phase systems, we successfully achieve higher viscosity ratios. Notably, our improved model dramatically reduces maximum spurious currents in porous media by two orders of magnitude (from 1e-3 to 1e-5) compared to its predecessor. Based on this improvement, we simulate two-phase flow in porous media, spanning a broad capillary number range (4e-5 to 1e-2), extreme wetting conditions (0º to 180º), and high viscosity ratios (up to 100). We are therefore able to extract more accurate velocity distribution for diverse analysis on multiphase flow in porous media.
In general, we propose a novel MCMP pseudopotential model, that extends our capacity to numerically investigate immiscible fluid flow in porous media with low capillary number and extreme viscosity ratio flow.

Speaker: jingsen feng

14:35 Pore-scale prediction of CH4-CO2 competitive adsorption in nanoporous media coupling molecular simulation and machine learning acceleration

In shale nanoscale pores, the CH4 molecular size is equivalent to the mineral molecular size, then, the non-negligible gas-solid molecular interactions lead to the existence of a large amount of adsorbed gas with low mobility, which has an important impact on shale gas production. Since the adsorption capacity of CO2 is higher than that of CH4, the injected CO2 can be adsorbed on the mineral surface and replace the adsorbed CH4, becoming an effective means to increase shale gas production and a potential way to realize CO2 geological sequestration. However, the current explanation of CH4-CO2 competitive adsorption is mainly limited to molecular simulation based on a single nanopore, the pore-scale competitive adsorption behavior in porous media with complex pore structure is still poorly understood and consumes a lot of computing resources.

In this paper, a multi-component lattice Boltzmann method coupled with molecular simulation and machine learning is proposed to accurately simulate and rapidly predict the competitive adsorption behavior of CH4-CO2 in shale kerogen and illite three-dimensional nanoporous media. Firstly, the density distribution of the miscible CH4-CO2 in kerogen and illite pores with different CO2 molar fractions is calculated by molecular simulation. Then, by fitting the molecular simulated density distribution, the CH4-solid and CO2-solid interaction force parameters in the multi-component lattice Boltzmann model are modified, and the CH4-CO2 competitive adsorption in kerogen and illite porous media is simulated based on the fitting parameters. Finally, the porous media are divided into 2095 pore structures by watershed segmentation algorithm, then, the artificial neural network is trained by pore-structure characteristics and competitive adsorption capacity to accurately predict the CH4-CO2 competitive adsorption content in arbitrary pore structure and porous media.

This method overcomes the limitation of computing resource consumption of molecular and pore-scale simulations, and provides an effective method for the accurate simulation and rapid prediction of multi-phase multi-component competitive adsorption behaviors in nanoscale space.
Keywords: CH4-CO2 competitive adsorption; three-dimensional nanoporous media; lattice Boltzmann method; molecular simulation; machine learning

Speaker: Han Wang

14:50 Multiphase Reactive Transport Modeling of CO2 Dissolution in Geological Carbon Sequestration Using Lattice Boltzmann Simulations

Geological carbon sequestration is the most suitable way to alleviate the negative influence caused by CO2 at the field scale. CO2 dissolution as one of the most indispensable and predominant trapping mechanisms is a complicated process involving both physical and chemical phenomena. In this work, CO2 dissolution after capillary trapping far away from the injection well under different environmental conditions is investigated to elaborate the main controlling mechanisms of CO2 dissolution reactions and the corresponding sensitivity analysis during these processes.
Coupled with homogeneous reactions in the brine and heterogeneous reactions at the CO2-brine interface, a multiphase Shan-Chen multiple-relaxation-time lattice Boltzmann model with multicomponent transport is established to capture CO2 dissolution reactions with phase transitions in saline aquifers. Controlling mechanisms of CO2 dissolution reactions are probed by estimating the temporal evolution of CO2(aq) concentration and the dissolved CO2 nodes under different diffusion coefficients and CO2 saturations in a periodic domain. Furthermore, CO2 dissolution in porous media is captured to explain the ion evolution during homogeneous reactions and characterize the impact of different factors, namely partial pressure, formation temperature and salinity, on this process in the view of practical application.
The rapid mass transport, namely the large diffusion coefficient, could keep the CO2(aq) concentration gradient at the scCO2-water interface at a high level, which would accelerate CO2 dissolution processes. The ratio of the equilibrium time between various cases is nearly about 3 times. Additionally, the reactive interfacial length also affects CO2 dissolution reactions. It can be concluded from the simulated results that higher reactive interfacial length would make the security of CO2 trapping greater under the same CO2 saturation. More importantly, it is found that the CO2 dissolution process is non-equilibrium and would not be omitted when the sequestration efficiency is estimated in reservoir-scale simulations. Otherwise, the accuracy of the results cannot be ensured. It is beneficial for sequestration efficiency to adopt the high-pressure region due to greater CO2 density and equilibrium concentration at the scCO2-water interface. Besides, the formation temperature, which should be prudently selected in the targeted saline aquifer for practical operation, has both positive and negative effects on CO2 dissolution. In terms of salinity, the more ion strength is the less trapping efficiency is.
This study offers not only a deeper understanding of multiphase reactive transport of CO2 dissolution in porous media during geological carbon sequestration but also a new idea about the same physicochemical backgrounds, such as the hydrogenation of levulinic acid.

Speaker: Qiuheng Xie (China University of Petroleum (East China))

13:50 → 15:05 MS11: 4.3

13:50 A Novel Microfluidic Approach to Quantify Pore-Scale Mineral Dissolution in Porous Media

Mineral dissolution in porous media coupled with single- or multi-phase flows is pervasive in natural and engineering systems. In subsurface environments, the solid porous matrix is composed of various types of minerals, through which subsurface water flows. Dissolution of minerals occurs as chemicals in the solid phase are transformed into ions in the aqueous phase, effectively modifying the physical, hydrological, and geochemical properties of the solid matrix as well as the chemistry in the aqueous phase. These processes play a defining role in a broad range of applications such as carbon capture and sequestration (CCS), underground contaminant transport and vadose zone sciences. For instance, CCS is considered as a viable technology to reduce carbon emissions to the atmosphere, thus effectively mitigating global climate change. However, injection of CO2 into geologic formations leads to dissolution of minerals, potentially comprising reservoirs rocks, and creating leakage pathways that threaten the safety and security of CO2 storage. Therefore, to successfully model, predict, control, and optimize these many processes, a comprehensive understanding of mineral dissolution is crucial.

Mineral dissolution in porous media and pore flow are strongly coupled. On the one hand, pore flow plays a defining role in mixing and transporting the reactants to the reaction sites as well as transporting reaction products away. On the other hand, mineral dissolution modifies the porous media both structurally and chemically, in turn reshaping the pore flow. However, our fundamental understanding of this coupling effect at the pore level is still limited, leading to strong challenges in the effort of predicting mineral dissolution at much larger scales. To this end, mineral dissolution is studied in novel calcite-based porous micromodels under single- and multiphase conditions, with a focus on the interactions of mineral dissolution with pore flow. The microfluidic devices used in the experiments were fabricated in calcite using photolithography and wet etching. These surrogate porous media offer precise control over the structures and chemical properties and facilitate unobstructed and unaberrated optical access to the pore flow with µPIV methods.

The preliminary results provide a unique view of the flow dynamics during mineral dissolution. It is observed that the local dissolution rate is strongly affected by the local pore flow, with much higher dissolution rate in fast flow regions and lower dissolution rate in slow flow regions. This process significantly reshapes the geometry of individual calcite grain, in turn posing feedback to the flow. Additionally, when HCl concentration is sufficiently high, the produced CO2 emerges as a separate phase, leading to a multiphase flow. The separate CO2 phase not only divert the HCl flow, but also shield the solid surfaces from further reaction, thus significantly modifying the local dissolution pattern and rate.

Speaker: Yaofa Li (Montana State University)

14:05 Self-organized colloidal streamers in porous media: Emergence, development and clogging consequence

Colloidal particles from industrial and natural sources can alter the environment they flow through. Colloidal retention and accumulation in porous media may cause catastrophic consequences, such as fouling of filtration membranes, formation damage in geological systems and thrombosis in human bodies. It can also be utilized in many aspects, including enhanced hydrocarbon recovery and targeted drug delivery. Therefore, prediction of retention and accumulation mode is crucial for understanding colloidal transport in porous media.

Conventional description of colloidal transport in porous media is based on filtration theory and core-scale measurements, where the collector efficiency serves as a comprehensive parameter reflecting all particle interactions with the medium. Recent advances in microfluidics have provided tremendous insight into pore-scale particle behaviors. Geometrical confinement in porous media is the most common origin of clogging, such as size exclusion and bridging effects. Physicochemical interactions also drive particle accumulation by promoting surface deposition and aggregation under favorable conditions. Previous studies mainly focus on the direct interaction between intercepted particles and surrounding medium, leading to increased flow resistance at narrow throats. However, the self-organization of colloids under constrained porous flow condition is overlooked.

In this work, we report unexpected formation of colloidal streamers in porous media. Microfluidic experiments with high-speed imaging system combining bright field and fluorescence observations enable us to visualize the emergence and development of self-organized particle structures. Streamer formation is initiated by particle retention in the stagnant zone between solid grains, where the interparticle adhesion contributes to the connection and thickening of streamer structures. Colloidal streamers are found to be ubiquitous by constructing regular arrays with various packing arrangements and densities. Balance between fluid shear force and particle-wall adhesion determines the extension state of these streamers, which is confirmed under oscillate boundary conditions. Numerical simulation with developed model based on computational fluid dynamics and discrete element method reproduces our experimental observations. The triggering mechanism and criterion for streamers are further clarified via theoretical analysis. When introduced into disordered porous medium, streamer development is further strengthened due to the complex geometry. Clogging consequences are observed and quantified for upscaling of streamer impact. Our results reveal the existence and importance of self-organized colloidal streamers, deepening understanding of microscopic colloidal behaviors with macroscopic flow consequences during transport in porous media.

Speaker: Xukang Lu (Tsinghua University)

14:20 Pore-scale investigation into the effects of fluid perturbation during hydrate formation

In order to increase the gas production efficiency during methane hydrate exploitation, the research focus should be on the methane hydrate formation and decomposition mechanism nowadays. As methane hydrate reformation and the hydrate heterogeneity in the pore of sediments show great influence on gas production during hydrate decomposition, new insights need to be supplemented to reveal the mechanism of hydrate phase transition. In this work, a new microfluidic chip “simple straight pipe chip” was designed based on the microfluidic device. By comparing with the former chip “cylindrical structure chip”, a series of experiments was conducted to investigate the morphology of hydrate phase transition. The “water perturbation under gas-filled situation” method and the “gas perturbation under water-filled situation” method were applied for hydrate formation. The results connect different methane hydrate growth patterns to different occurrence patterns in hydrate-bearing sediments. In the gas-filled situation, with the water migration rate rising, the hydrate stable state varies from grain-coating hydrate to load-bearing hydrate. In the water-filled situation, with the gas migration rate rising, the hydrate stable state becomes narrower. These results also gave explanations for hydrate reformation and heterogeneity in hydrate-bearing sediments. The depressurization in gas production will create water and gas flow to varying degrees, which will lead to hydrate reformation and the heterogeneity situation. Finally, these findings also provided valuable information and data for gas production and further research into gas hydrate.

Speaker: Rui Xu

14:35 Microfluidic Visualization and Modeling of Polymer Induced End-Point Relative Permeability Damage

After polymer injection, the end-point relative permeability of porous medium to other fluids often drops significantly and is not the same as that prior to polymer injection. To understand the hydrodynamic mechanism of this change, we conducted microfluidic experiments. We discovered that polymer solutions were mostly found in pores that are aligned with the direction of mean flow. At the end-points, to flow around the polymers, oil / water needed to use channels that are not aligned. Their flow pathways hence became more tortuous. To quantify the effect of pathway tortuosity, orientation distributions of fluids in the microfluidic porous medium were measured. They were then coarsened into four bins consisting of channels 0, 30, 60, and 90 degrees relative to the direction of mean flow. By treating the microfluidic porous medium as a superposition of two inter-penetrating honeycombs, we show that the observed distributions of fluids at the end-points could largely explain the changes in the end-point relative permeabilities, proving the tortuosity of the flow was indeed a significant contributor to end-point relative permeability damage.

Speaker: Xiaolong Yin (Eastern Institute of Technology, Ningbo)

14:50 Experimental Study of Dissolution Regimes in a Multiphase Flow Environment with Real-Rock Microfluidics

Multiphase flow coupled with rock dissolution is prevalent in subsurface energy applications and natural phenomena, such as karst formation, acid stimulation, and CO₂ sequestration. The interplay between multiphase flow and rock dissolution will profoundly influence the geochemical and geophysical properties of reservoir formation. Despite its importance, we still lack a thorough understanding of the coupling of multiphase flow and rock dissolution. Here, microfluidics fabricated with the geo-materials are used to study the pore-scale mechanism of rock dissolution in a multiphase flow environment. Experimental findings reveal dissolution regimes contingent upon injection rates and the channel geometries. At lower injection rates and in more homogeneous geometries, the dissolution exhibits a uniform regime. In this regime, the evolution of the rock surface aligns with classical assumptions, facilitating the prediction of long-term dissolution rates. While under stronger flow and heterogeneous conditions, the dissolution exhibits a localized regime, and the dissolution rate deviates significantly from the classical assumptions. Experimental observations identify a pore-scale barrier mechanism that suppresses the overall dissolution rate and leads to this deviation. We also proposed a theoretical model for the regime transition, which offers guidance on the prediction of dissolution rate across various dissolution scenarios.

Speaker: Chen-Xing Zhou (State Key Laboratory of Water Resources Engineering and Management)

13:50 → 15:05 MS16: 4.3

13:50 Membrane fouling and filtercake formation during static microfiltration harvesting of microalgae using thin glass fibre filters

Micro-algae are being considered increasingly as an economic source for the sustainable production of biodiesel, food (additives), pharmaceuticals and nutraceuticals. However, the excessive cost and low efficiency of current microalgal harvesting processes limit the potential large-scale uptake of microalgal farming to transform industrial applications. Absence of universal separation methods, excessive energy inputs and hazardous chemical additives required are the main obstacles [1]. In spite of these limitations, membrane filtration techniques dominate the harvesting of oil-rich microalgae [2]. Filtration conditions have been adapted to optimize microalgal dewatering, including crossflow-, dynamic-, submerged membrane-, micro- and ultra-filtration. However, it has been suggested that static filtration may provide a simpler and more economical separation alternative, independent of cell motility, morphology, and surface charge. As a result, membrane filtration for the harvesting of microalgal cells has shown great promise and economic utility in recent studies. A challenging problem, however, in the filtration harvesting of algal suspensions is fouling of the membrane, leading to a continuous decrease of the filtrate flow rate. The foulants include suspended microalgal cells and their presumed Extracellular Polymeric Substances (EPS). To investigate this problem, we perform static microfiltration experiments, using thin glass fibre filters, to harvest oil-rich marine microalgae Nannochloropsis oculata [3]. Batch filtration experiments of microalgal suspensions using glass-fibre membranes are conducted under filtration pressures varying between 0.5 and 200 kPa. Here we investigate the relative importance of potential fouling mechanisms reported in the literature, including pore plugging, entrance blocking, and filter cake formation. [2] We examine variations in filtrate flux, using numerical differentiation of the filtrate volume to identify its scaling relationship with time and compare with the traditional root-time behaviour. These results are analysed with reference to the blocking filtration laws to determine the potential fouling mechanism. Rheology tests of both filtration feeds and filtrate are performed, and both optical and scanning electron microscopy are used to observe the filtercake. Our results show a significant drop in the filtrate flux after a spurt loss phase under pressure. Scaling analysis demonstrates a power law relationship between cumulative filtrate volume and time in the post-spurt phase. We show here, for the first time, that the scaling exponent varies with time, approaching a value close to 0.5, i.e. root-time behaviour, only late after the initial spurt phase. Furthermore, our findings suggest that filtration of fresh microalgal suspensions experience a larger spurt loss compared to aged suspensions. This difference may be attributed to the limited production of EPS and microalgal debris during shorter cultivation periods. The microscopic observations reveal the invasion of microalgal cells into the porous membrane, which evidence the formation of an internal filtercake suggested by the blocking filtration laws. The invasion of microalgal cells results in significant membrane contamination, and the contamination rate increases with higher filtration pressures. Finally, we demonstrate that Fe3+ coagulant can be used to increase the microalgal particulate size before filtration, resulting in a much higher filtrate flux compared to uncoagulated suspensions. This result provides tremendous opportunities to reduce membrane contamination to a negligible level.

Speaker: Mr Jincheng Wu (Centre for Sustainable Engineering, School of Engineering and Materials Science, Queen Mary University of London)

MS16_885_Jincheng Wu.pdf

14:05 Color Properties and Porous Ink Layer – a study via Optical Spectroscopy

The world of printing is rapidly and extensively developing due to the progress made in the inkjet technology. This printing technology delivers good print quality using the flexibility of digital printing at a breakthrough cost price. The R&D department of Canon Production Printing company, is a major player in the development of inkjet technologies for many different applications.

The physical processes which regulate the interactions between ink droplets and a thin porous paper have been the subject of many studies considering both theoretical understanding and sustainable industrial applications.

Understanding the processes as ink spreading, evaporation and imbibition into porous material is vital for having prints of high quality. Experimental studies based on Optical Spectroscopy & Microscopy, Scanning Electron Microscopy (SEM), Nuclear Magnetic Resonance (NMR), Automatic Scanning Absorptometer (ASA), etc have been used to get in-depth of these physical phenomena, which design the print drying. The result of drying process is an ink solid thin film formed onto porous paper. We have to consider a surface topography of the ink layer, as well as a resulted interface ink/paper. Due to the complex drying process, the ink layer might have a (in)homogeneous distribution of the pigment particles into the polymeric matrix. Also, our SEM studies showed the presence of the voids of various dimensions into this structure.

The outputs of a print process are image quality and print robustness. This means optical and mechanical properties of the thin ink layer onto porous paper. In this work, VIS optical spectroscopy is employed on both the computational simulation (Scout code program) and the experimental studies to reveal the relation between the compositional properties (pigment distribution, layer thickness, concentration and distribution of voids) of the ink layer and the color properties of the print.

Speaker: Dr Nicolae Tomozeiu (Canon Production Printing B.V.)

14:20 Evaporation and absorption of surfactant-laden droplets on unsaturated porous media

Understanding the evaporation and absorption of surfactant-laden droplets on porous media is challenging and important for many industrial applications, for example, inkjet printing. The evaporation of droplets containing dispersed solid particles on a solid surface has aroused much interest and has extensively been studied. The non-uniform evaporation pattern, resulting after evaporation, is well known as the coffee ring effect. Deegan et al. [1] found that this pattern is caused by the outward flow within the droplet during evaporation. To obtain a uniform deposition pattern, surfactants are added which suppress this outward flow, which is especially significant in inkjet printing applications to enhance the print quality.

The evaporation of surfactant-laden droplets on a fibrous thin paper sheet is a more complex process, involving spontaneous droplet evaporation, water imbibition into pores causing an unsaturated porous medium, and surfactant transport in both the droplet and the porous medium, as illustrated in Figure 1. We use both theoretical and numerical methods to explore this process. The mathematical model for flow in droplets is based on lubrication theory. For the calculation of the vapor concentration, which determines the evaporation flux, an analytical method is used. For the droplet absorption process, the Richards equation is used, where it should be noted that we do not describe the flow on the scale of the pores, but rather use properties averaged over a number of pores. For the surfactant transport process, a mass conservative convection-diffusion model is employed. A three-stage diagonally implicit Runge-Kutta scheme and a finite volume method are used to simulate the process numerically. We will specifically study how the results are affected by the assumption of unsaturated flow in the pores. We will validate the unsaturated flow model and simulation method by comparison with numerical solutions for transient flow in a thin porous medium obtained by Zhuang et al. [2]

Speaker: Xiaoxing Li (Department of Mechanical Engineering, Eindhoven University of Technology)

14:35 Unveiling moisture transport mechanisms (vapor vs. bound water) in cellulosic materials: application to droplet absorption

Thin cellulosic materials such as natural textiles, paper, or bio-based walls, exhibit a remarkable capacity to absorb humidity from the environment through "bound water" sorption within nanopores, constituting up to 30% of their dry mass [1]. Understanding the mechanisms of induced water transfers is crucial for advancing industrial processes and sustainable practices across various fields, including wood drying, paper production and usage, moisture transfers in clothes or hair, and humidity regulation of bio-based construction materials. Despite the significance of this knowledge, the transport and storage mechanisms of moisture in these materials is still poorly understood, often relying on modeling assumptions of dominant vapor transport with an assigned diffusion coefficient [2].
Our research addresses this research gap by highlighting the critical role of bound water transport within interconnected fiber networks. Particularly, at low porosity, our findings reveal that bound water diffusion surpasses vapor diffusion [3]. Through rigorous experimentation, we isolate diffusion processes and derive diffusion coefficients, establishing a comprehensive model for moisture transfer. Remarkably, our model accurately predicts the spatial distribution evolution of bound water over time across varying porosities, as confirmed through Magnetic Resonance Imaging (MRI). This paradigm shift, indicating the dominance of bound water transport over vapor transport, provides control of humidity-related processes.
Furthermore, our observations extend to the essential role of bound water diffusion in the fate of an aqueous droplet over long time, specifically in papers and masks. From Magnetic Resonance Images, it appears that even in a close container blocking evaporation the liquid water of this droplet reaching a non-treated cellulosic sample, progressively disappears. We show that our model fully describes this process: the free water is rapidly absorbed as bound water which then diffuses through fiber network partly as bound water and partly as vapor.

Speaker: Yuliang ZOU (Laboratoire Navier, Ecole des Ponts ParisTech, Université Gustave Eiffel, CNRS)

14:50 The effect of graphene and porous coatings on flow boiling in flat microchannels under intense localized heating

Subcooled water flow boiling experiments were carried out in flat mini- and microchannels under intense local heating (up to 1600 W/cm2) for different heater surface morphology. Two different heaters were used: 10x10 mm2 heater and 3x3 mm2 heater. In total, 4 different types of heating surfaces were used: 1) smooth copper, 2) rough copper, 3) porous coating, 4) graphene coating. The structure of surfaces was studied in detail using atomic force and electron microscopy methods, as well as spectroscopy Raman scattering of light. The DSA100 KRUSS automated measuring system was used to study wettability of the surfaces. In experiments on flow boiling it was found that with an increase in the channel height in the range of 0.2 – 3.7 mm, the heat transfer rate and critical heat flux increases significantly. For a given fluid flow rate and channel height, the critical heat flux on the 3x3 mm2 heater exceeds the heat flux on the 10x10 mm2 heater, and with increasing channel height this difference increases. Boiling curves were obtained for different water flow rates at different channel heights for heaters measuring 3x3 and 10x10 mm2. The behavior of the boiling curves is generally similar for both heater sizes - over the entire range of water flow rates and channel heights. It was found that at high values of mass flow rate of water, the critical heat flux for porous surface exceeds by approximately 30% the critical heat flux for smooth surface. On porous surface the heat transfer coefficients are significantly higher than on smooth surface. Moreover, at relatively small values of overheating, the difference in the heat transfer coefficient is two times and more. A series of experiments were carried out to study the effect of the heater coating on the frequency of formation of vapor bubbles. It was found that at relatively low heat fluxes, the specific frequency of bubble formation on rough surface, and also on surface coated with graphene, is higher than on smooth one. However, as the heat flux increases, the difference in the frequency of bubble formation on these surfaces practically disappears. Whereas the formation of bubbles on the porous surface occurs with twice the frequency compared to other surfaces in the entire range of heat fluxes. The results obtained can explain the recorded significantly higher heat transfer coefficients and critical heat fluxes on the porous surface.

The work was supported by the Russian Science Foundation (grant no. 22-49-08018).

Speaker: Dr Dmitry Zaitsev (Kutateladze Institute of Thermophysics SB RAS, Novosibirsk, 630090, Russia)

13:50 → 15:05 MS17: 4.3

13:50 Study the fluid flow interaction with fracture and matrix in the porous media.

The research is to investigate the fluid flow dynamics during growth of fractures associated with matrix using direct observations from 3D computed tomography and microscale modelling approach.
The lab experiment is carried out with both geomechanical and hydraulic experiment using rock core samples. The triaxial pressure, the flow rate as well as the pressure gradient are monitored throughout the experiment. The CT scanning imaging technology is an effective method that provides a direct information of pore/fracture structure, leading to multiscale fracture-matrix pore structure modelling and the flow simulation based on the interaction of pore/fracture fluid flow physics which can be validated by experimental data. The CT scanning and SEM images are used to build the fracture-matrix pore network model and the resultant flow simulations are calibrated with the lab data. The results of fracture-matrix modelling approach and calibration of flow simulation against measured data to reveal the interaction flow mechanism will be presented.

Speaker: Dr Kejian Wu (The University of Aberdeen)

14:05 A pore-scale perspective on the hydraulic fracturing of heterogeneous glutenites

Hydraulic fracturing is one of the most important technique for the development of tight glutenite reservoirs. The strong heterogeneity of the sand and gravel particles make it difficult to comprehensively understand the fracturing mechanisms of glutenites. Most of the existing studies have been mainly focused on the effects of injection rate[1], stress differential[2], and fracturing fluid viscosity[3], However, there still lacks a systematic consideration of the impact of glutenite heterogeneity especially on the aspects of matrix and gravel bonding interface strength and gravel mechanical properties.
Therefore, the aim of this study is to reveal the effects of interface bonding strength and gravel properties on the fracture evolution of glutenite at the pore scale. The heterogeneity of the matrix, gravel particle, and interface strength are considered by a global cohesive zone model. Heterogeneity is achieved by assigning different strengths and critical fracture energies to the cohesive elements of matrix, gravel, and interface. The simulation is validated by comparing the results with existing experimental observations[4].
We first discussed the fracturing of a model glutenite with the same size gravel particles but different interface bonding strength and gravel properties. We established a phase diagram to fast evaluate the crack propagation mode by using the ratios of critical tensile energy of gravel to matrix and matrix to surface. To get closer to the real glutenites, we also considered more complexed glutenites composed of three kinds of gravels with different sizes, bonding strengths and mechanical properties. Modeling results indicate that hydraulic fractures tend to propagate along the path with the minimum critical fracture energy. The differences in strength between gravel and interface lead to alterations in the propagation path and speed of hydraulic fractures, significantly impacting the length of hydraulic fractures.

Speaker: yanying chen (School of Civil and Resource Engineering, University of Science and Technology Beiing,)

14:20 Evaluating and enhancing the fracture conductivity by an optimised carrier fluid and proppant design

Despite the fact that China has become one of few countries that can achieve economic exploitation of continental shale oil and gas, we are still confront of tricky challenges in further enhancing the recovery of hydrocarbon. Among the influencing factors, the long-term fracture conductivity after hydraulic fracturing plays a crucial role in the overall productivity of the well. Meanwhile, the stimulation of natural fissures, which are expected to collaborate with the artificial fractures, is also of great significance to an improved reservoir permeability. This requires a well-projected design and injection scheme of fracturing fluids and proppant. On top of that, a better understanding of the transport mechanism of such a fluid-particle-based system at the particle-scale can promote an optimised combination of fracturing fluid and proppant.
Hence, the aims of the current research include a parametric study of the particle-laden flow in the fractures and a systematic evaluation of the conductivity of the propped fractures. The study on proppant transport is accomplished by means of numerical simulation. The implemented numerical framework consists of the lattice Boltzmann method (LBM) for the fluid and the discrete element method (DEM) for the large number of moving particles. A partially saturated boundary condition is applied to provide an accurate characterisation of the fluid-solid boundaries. The transport mechanism of the proppant at the artificial-natural fracture intersection as well as the flowback mechanism of the proppant are studied. Factors including proppant size and concentration, aperture-to-diameter ratio, injection rate and fracture inclination are investigated in detail. Specifically, the shear-thinning rheology of the immersed proppant bed is observed, which results in a nonlinear variation of proppant bedload transport with the fluid. The fracture conductivity is experimentally evaluated using the shale cores and sand proppant at the reservoir pressure. By adjusting the proppant aspect ratio, we find an optimised proppant concentration for each overburden pressure, under which the fracture conductivity reaches the maximum.
The present study can provide a powerful numerical approach towards a particle-scale characterisation of proppant transport. Besides, it also formulates an efficient workflow to evaluate and optimise both short- and long-term fracture conductivity. The outcome of the current research contributes to a better design of the fracturing fluid comprising of the carrier fluid and proppant. It also provides a theoretical basis for an optimised proppant selection for future hydraulic fracturing operations, which benefits the exploitation of the continental shale oil in China.

Speaker: Prof. Duo Wang (Northeast Petroleum University)

14:35 Experimental study on pressure-increased water injection by nuclear magnetic resonance method

Waterflooding is one of the key technology for oilfield development. Reasonable injection and production design is very important for efficient development and enhanced oil recovery. The pore size, oil and water saturation of reservoirs are different, and the remaining oil saturation occurrence mode is different. How to effectively start the remaining oil and which pores start the remaining oil is one of the problems concerned in oilfield development. Core displacement test is used to develop water injection in different pressure gradients. The effects of injection and production pressures, permeability and different pressure gradient on oil recovery factor and water-cut were evaluated by means of nuclear magnetic resonance test. The results show that oil recovery factor increases first and then decreases with the increase of injection rate. Oil recovery factor increases first and reaches a maximum at 8mL/min, and the total recovery factor of high, middle and low permeability cores decreases in turn. The recovery factor increased to the highest when the pressure was increased to 8mL/ min. The pore structure of the core is dominated by small pores and large pores, while there are a few medium pores, and large pores are the main contributing areas of oil production. For low permeability core, the oil in small pores is mainly moved by pressure increasing, while for medium and high permeability core, the oil in large pores is mainly moved for pressure increasing.

Speaker: Prof. Renyuan SUN (China University of Petroleum (East China))

15:05 → 16:35 Poster: Poster Session VIII

15:05 AI assisted prediction of Sweep Efficiency of Hydrogen – Water Displacements in Porous Media

In the present era of escalating global energy consumption, there has been a marked shift in the dynamics of energy supply and demand, resulting in significant disparities between these two variables throughout the year. To address this imbalance, energy storage technologies have emerged as a potential remedy to facilitate the integration of renewable energy sources. Among these technologies, underground hydrogen storage has received considerable attention as a viable option for large-scale energy storage. Hydrogen can be stored in various subsurface structures, including aquifers, depleted oil and gas reservoirs, and salt caverns. Aquifers, defined as layers of permeable and porous rock containing fresh or saline water at considerable depths, are widespread in sedimentary basins worldwide. Therefore, exploring the potential of utilizing aquifers for hydrogen storage may help overcome the geographical constraints associated with alternative storage options.
The retrieval of stored hydrogen is a critical consideration that can significantly impact feasibility assessments and performance projections of the storage process. Factors such as hydrogen dilution with cushion gas, chemical reactions, and entrapment within the aquifer can lead to reduced hydrogen recovery. These phenomena are influenced by pore structure, interfacial properties between hydrogen and water, and flow dynamics.
Accurate modeling of the injection-production cycles to estimate the residual hydrogen saturation, and consequently the recoverable amount of hydrogen, necessitates time allocation and multi-phase flow parameters, often unavailable. As a result, machine learning methods have been explored for sensitivity assessment and displacement efficiency estimation. In this study, a machine learning approach was employed to predict the sweep efficiency of hydrogen – water displacement in synthetically designed porous media.
To achieve this objective, artificial porous environments with varying particle size distributions and random spatial arrangements were generated and incorporated into the simulation software. A numerical model was developed to simulate displacement processes within these environments. The simulation results, including the image of the porous medium, and the parameters defining the displacement scenario such as injection rate, fluid properties, and interfacial characteristics, were utilized as input data to the algorithm. During the training phase using machine learning, two approaches based on image processing of the porous medium—Multi-Layer Perceptron (MLP) and Convolutional Neural Network (CNN)—were employed. The primary goal of both algorithms was to predict displacement performance and saturation profiles within the porous space. The results show the aptness of these algorithms for prediction of recoverable hydrogen in terms of the porous medium’s description and two-phase flow parameters.

Speaker: Mozhdeh Sajjadi (Assistant Professor, Institute of Petroleum Engineering, School of Chemical Engineering, College of Engineering, University of Tehran)

15:05 An Autonomous Adaptive Meta Model (AAMM) for Real-Time Oil Rate Prediction and Optimization in Dynamic Environments

This study introduces a groundbreaking Autonomous Adaptive Meta Model (AAMM) as an innovative solution to meet the escalating demand for precise and reliable oil prediction rates over a 20-year horizon. By leveraging machine learning algorithms and edge computing techniques, the AAMM dynamically adapts and optimizes its prediction model in real-time, responding to changing oilfield conditions. It integrates Extremely Gradient Boosting (XGBoost), Random Forest (RF), Bidirectional Long Short-Term Memory (BiLSTM), and Artificial Neural Network (ANN) to autonomously learn and adjust its parameters based on real-time feedback from the oilfield data. This adaptive capability enhances the predictive accuracy and reliability in dynamic and complex oilfield environments. Additionally, the AAMM incorporates edge-computing technologies to process and analyze data directly at the source to reduce latency and expedite decision-making. Utilizing a comprehensive dataset comprising historical oil production data, geological information, well characteristics, and other relevant factors, the AAMM remains up-to-date with the latest information through real-time integration of streaming data. Validation and test on real-world oilfield data demonstrate the AAMM’s superiority over the traditional standalone models and static meta models. It’s autonomous adaptation is proved crucial in maintaining accuracy midst changing conditions, providing a robust solution for oil production optimization.

Speaker: Ms Fatna Said Adinani (China University of Petroleum (East China))

15:05 An integrated approach to correction for high pressure mercury intrusion experiment of shale cores based on Micro CT and FE-SEM imaging

Mercury intrusion porosimetry（MIP）is a common but indirect technique for characterizing and analyzing pore structures. It provides pore/throat size distribution and capillary breakthrough pressure by measuring the injected mercury volume along with increasing injection pressures. However, our Micro-CT comparison results substantiated that MIP results deviate from real pore structure characterization by reason of incomplete mercury intrusion, which is mainly due to microscopic heterogeneity and fracture compressibility of pore spaces in shale cores. Particularly, random micro- and nano-cracks, which could manifest as continuous accumulation space and inhomogeneous, distorted, compressible stress field, are major contributors to data deviation. The complex mineral composition and uncertain connectivity of nanopores also affect the accuracy of capillary breakthrough pressure in MIP results under high-stress conditions. The stress deformation of pore structure of three typical types of Gulong shale cores are studied by using Wood’s metal injection at 30MPa, 50MPa and 200MPa respectively. Micro-CT and FE-SEM images of core samples before and after injection were compared to evaluate Wood’s metal intrusion in pore/crack structures at micrometer and nanometer scales. Through the estimation and analysis of the Wood’s metal filling amount in cracks and intrusion distance in the matrix under three different pressure conditions, the post-stress deformation and excess cumulative injected volume are calculated. Applying this calculation of stress deformation and excess volume, this paper presents a method for modifying high pressure mercury porosimetry results based on the crack initiation and cumulative injection volume correction. By comparing the pore size analysis results obtained by the nitrogen adsorption method, we verify the feasibility of the proposed method and the reliability of the improved analytic results.

Speaker: Dr Yan Wang (National Key Laboratory of Continental Shale Oil；Exploration and Development Research Institute of Daqing Oilfield Co Ltd；Heilongjiang Provincial Key Laboratory of Reservoir Physics & Fluid Mechanics in Porous Medium)

15:05 Comparative Analysis of Immiscible Displacement in Porous Media: Experimental and Numerical Studies on Supercritical CO2 and Water Interaction

This research provides an in-depth analysis of the immiscible displacement process within porous media, focusing on the interaction between water and supercritical CO2 in porous media. The study is unique in its dual approach, incorporating both experimental and numerical methods. The experimental component utilizes a transparent micromodel, representing a porous medium, where supercritical CO2 is injected into a water-saturated environment. This setup allows for direct observation of the displacement patterns and the formation of preferential pathways. In parallel, the numerical analysis is conducted using COMSOL Multiphysics, simulating the same scenarios for a comparative study. The primary aim of this research is to observe and understand the dynamics of water displacement by supercritical CO2 and the development of preferential flow paths in the porous media. These pathways are of significant importance in various fields such as carbon sequestration, enhanced oil recovery, and environmental studies. The study specifically examines how injection pressure and the wettability of the porous medium influence the creation and evolution of these pathways and the overall efficiency of the displacement process. A key finding of this study is the close resemblance between the displacement patterns observed in the experimental micromodel and those predicted by the numerical simulations. This similarity validates the accuracy of the numerical models used in the study. The research reveals that the injection pressure is a critical factor in determining the displacement efficiency of water by supercritical CO2. Furthermore, the wettability characteristics of the porous medium significantly affect the formation and structure of the preferential pathways. The comparative analysis between experimental and numerical findings provides a comprehensive understanding of the immiscible displacement phenomena in porous media. This study not only enhances fundamental knowledge in fluid dynamics within porous structures but also offers practical insights for applications in environmental and energy sectors. The research demonstrates the effectiveness of combining experimental observations with numerical modeling for a more thorough understanding of fluid behaviors in subsurface environments. It underscores the significance of factors such as injection pressure and wettability in governing fluid interactions and pathway development in porous media. The study’s results are relevant for improving techniques in carbon sequestration, enhancing oil recovery methods, and devising better strategies for groundwater contamination prevention.

Speaker: Sookyun Wang (Pukyong National University)

15:05 Effect of Porous Media Properties on Pressure Drop and Coolability in Nuclear Debris Beds

Abstract:

The management of severe accidents in nuclear reactors necessitates a comprehensive understanding of the coolability of corium debris beds. These beds, formed during fuel-coolant interactions (FCI), have a substantial influence on the advancement of meltdown events. The purpose of this study is to investigate the relationship between the physical characteristics of porous media in debris beds and the pressure drops that these features cause, which, in turn, affect the coolability of the debris beds. By presenting experimental data from a testing facility that has been carefully developed, the research intends to lessen the amount of uncertainty that is associated with coolability analysis.
During a catastrophic accident, several essential components, such as fuel, cladding, and structural parts, experience heat damage and melting. The ensuing interaction with the coolant results in the creation of a porous corium debris bed, which a variety of particle shapes and sizes can identify. The formation of this permeable substance is determined by the processes of melting, breaking into fragments, and solidifying that the core materials experience when they come into contact with the coolant. This research examines the impact of pressure decreases throughout a diverse debris bed, which is a crucial component in evaluating the effectiveness of emergency cooling systems.
Our analysis indicates that the decrease in pressure across the debris bed has a substantial impact on the coolant's capacity to go through the porous material. The pressure gradient is significantly influenced by factors such as the distribution of particle sizes, the porosity of the bed, and the velocity at which coolant flows. The experimental work done at our testing facility provides valuable data on the connection between these factors. The facility allows for the careful simulation of severe accident scenarios and the real-time observation of pressure drops.
This work focuses on reducing uncertainty in the analysis of the capacity to cool a debris bed that forms following a supposed catastrophic accident in a Fuel-Coolant Interaction (FCI) scenario. The specific area of interest is the pressure drops. A test facility was constructed and created through the process of doing experimental work. The experimental results emphasize the significance of comprehending the dynamic characteristics of pressure decreases in the context of major nuclear incidents. Additionally, they emphasize the need for emergency response methods to include the heterogeneity in debris bed characteristics.
The experimental insights garnered offer a substantial leap forward in nuclear safety practices. They inform the development of improved predictive models and cooling technologies, ultimately enhancing the preparedness and resilience of nuclear reactors to severe accidents. By addressing the pressure drop phenomena with empirical data, this work lays the groundwork for the next generation of safety protocols in the nuclear industry.
Keywords:
Debris Bed Coolability, Pressure Drops, Porous Media, Severe Nuclear Accident,Nuclear Safety

Speaker: Dr Aimad Bouloudenine (xian jiaotong university)

15:05 Experimental and Model Studies of Fluids in Micro-Nano Scales

Since the beginning of the 21st century, fluid flow in micro-nano space has become a new research hotspot with the rapid development of micro-mechanical systems and bio- engineer-ing. Through quartz capillary and alumina channel, the flow characteristics of gas, water and oil were explored, and the flow characteristics of unconventional oil and gas reservoirs in micro-nano scale were studied. The corresponding nonlinear flow model, non-Newtonian fluid mechanics and neural network prediction model were established, which not only ex-plains the complex mechanism of fluid flow at micro-nano scale, but also provides theoretical support for application.
(1) Experimental studies of single-phase fluid at micro-nano scale: The gas flow be-havior in micro-nano channels was studied by means of experiments, and the gas flow under different conditions was analyzed. Through the flow experiments of deionized water and oil in nanochannels, it is found that the flow characteristics of water in nanochannels are differ-ent from those in traditional macroscales. The formulae of flow rate were derived for hydro-philic fluid, and were testified by experiments of deionized water flow in silica micro-channels. Finally, the non-Newtonian power-law fluid model of single-phase liquid was derived at the micro-nano scale.
(2) Experimental studies of two-phase flow at micro-nano scale: There are three stages in the change of gas flow rate when gas drives water at the micro-nano scale. In the first stage, there is a “pinning” effect of capillary pressure at the gas-liquid interface, and the flow rate increases slowly, which is about one order of magnitude lower than that of single-phase gas flow. In the second stage, a large amount of water in the nanoarray is displaced, finally the gas flow rate increases rapidly. A mathematical model of gas-liquid spontaneous imbibition was established. The validity of the model was verified by experiments, and the formula of the minimum resistance radius was derived.
(3) Application of neural network method in tight oil reservoirs： Based on the BP neural network method, the prediction model of non-Newtonian parameters in tight oil reser-voirs was established, and the average relative error is less than 5%. Based on Adam optimi-zation algorithm, a CNN-LSTM(Convolutional Neural Network-Long Short Term Memory) neural network model was established to predict the daily oil production of fractured hori-zontal wells in tight oil reservoirs. The model fully considers the heterogeneity characteris-tics of tight oil reservoirs, which effectively establishes the complex relationship between reservoir parameters and oil production.
Keywords: micro-nano channels, tight oil and gas reservoirs, Single phase and two phases flow, nonlinear flow.

Speaker: Mr Fuquan Song (School of Petroleum and Natural Gas Engineering, Changzhou University,)

15:05 Exploring the Influence of Rock Material on Low Salinity Water Flooding Outcomes: An Experimental Study Utilizing Chalk Samples

The low salinity water-flooding technique in enhanced oil recovery (EOR) has the potential to alter the equilibrium of the initial crude oil/brine/rock (COBR) system, enabling further mobilization of oil within porous media. However, uncertainties arise, particularly with realistic crude oils containing polar components and highly reactive rock surfaces. While extensively demonstrated in sandstones and some carbonates, its application faces significant challenges when dealing with carbonate reservoirs, especially chalk formations. Chalk reservoirs present hurdles due to their low matrix permeability, high porosity, substantial heterogeneity, and propensity for surface reactions with both crude oil and brine.
A comprehensive study was conducted on low salinity waterflooding in Danish Chalk reservoirs, revealing contrasting findings compared to existing literature. Notably, the study highlighted the detrimental impact of sulfate ions in injected brine on oil recovery. To delve deeper into these outcomes, experiments were performed on various chalk samples, encompassing outcrop material, dry-stored reservoir core plugs, and preserved reservoir core samples. It's essential to note that existing literature primarily relies on experiments conducted on outcrop samples, potentially limiting their applicability to reservoir conditions.
Coreflooding results indicated that preserved core samples initially displayed an oil-wet state, reflective of reservoir conditions, but this state changed after waterflooding and cleaning procedures. Consequently, direct comparisons of results from the same core become challenging, rendering cores non-reusable. Conversely, dry-stored reservoir core plugs exhibited no alteration in their wetting state across multiple experiments, ensuring their reusability and enabling repeatable, comparable results. However, results derived from outcrop samples were fundamentally dissimilar to those from reservoir samples, making them inadequate analogs. The wetting condition and the process of wettability alteration observed in outcrop samples differed significantly from reservoir samples. This discrepancy explains why the negative impact of sulfate ions was only evident in reservoir samples.

Speaker: Dr Rasoul Mokhtari (Danish Offshore Technology Centre)

15:05 Feasibility study on enhancing adsorbed gas production in shale reservoir by nano-silica

Background, Aims and Scope. Investigating novel techniques and theories to fracture shale reservoirs and improve effectiveness in CO2 storage is crucial in the context that hydraulic fracturing of shale gas Wells consumes a lot of water resources and needs to reduce carbon dioxide emissions.It is well known that CO2 can improve the output of shale adsorbed gas by compete with methane adsorption.At present, people use supercritical CO2 to fracture shale reservoirs to achieve waterless fracturing and the purpose of CO2 in-situ storage. However, the low viscosity of supercritical CO2 makes it poor in carrying capacity and easy to cause sand plug.Therefore, it is proposed to use nanoparticles in collaboration with supercritical CO2 to fracture shale gas reservoirs. The purpose of adding nanoparticles to supercritical CO2 is to improve the ability of supercritical CO2 fracturing to transform reservoirs.
Method. Core displacement experiments were carried using the mixed gas of co2 and nano-silica. The methane-CO2 competitive adsorption experiment of shale powder containing nano-silica was carried out at high temperature and high pressure. The feasibility of nano-silica particles cooperating with supercritical CO2 to improve shale gas production and realize long-term CO2 storage was preliminarily verified.
Results and discussions. (1) Nano-silica can reduce the adsorption capacity of shale and improve the production of adsorbed gas. The adsorption capacity of shale treated with nano-silica is reduced by 10%. (2) Nano-silica decreases the porosity and permeability of shale matrix. But nano-silica eliminate the negative effects of pointing phenomenon and interporosity flow, thereby uniformly displacing more methane. (3) Nano-silica improves the stability and viscosity of liquid CO2.

Speaker: Dr Maoling Yan (Southwest Petroleum University)

15:05 Gas mass transfer in deep coal cleats: coupling multiple flow mechanisms and poromechanics with creep

Deep coal rocks normally have higher gas content compared with shallow to medium-depth coal formations, showing great exploitation potential. However, they generally have complex pore structure and exhibits poor gas transport capacity under high overburden stress. The utilization of massive hydraulic fracturing can effectively release the productivity of deep coal reservoir. Nevertheless, the high overburden stress enhances the rock elasticity. Thus, during fracturing fluid flowback and the later long gas production periods, coal permeability loss due to matrix creep deformation in addition to the effective-stress-induced permeability reduction. Accurate characterization of deep coal rock permeability is an indispensable step toward precise simulation of gas transport and accurate assessment of productivity.

Coal permeability is mainly offered by the cleat system. To fully consider the impact of multiple gas transport mechanisms and creep on coal permeability evolution, this research presents a unified apparent permeability model based on the poromechanical theory and flow regime correction. Multiple flow mechanisms, including viscous flow, Knudsen diffusion, desorption, and real-gas effects are coupled in the single-fracture/cleat flux equation with dynamic viscosity. The fractal theory is employed for permeability upscaling. Specifically, the dynamic fracture/cleat aperture incorporates the impacts of desorption-induced internal swelling, full-stage/two-stage creep-induced compression and fracture/cleat aperture shrinkage depending on the actual stress state.

The proposed permeability model’s results show good agreement with experimental data and can explain the time-dependent permeability evolution during the full-stage creep process. A new permeability surface concept is established to better illustrate permeability evolution by including the time dimension. During gas extraction, initially, permeability mainly influenced by the decelerated creep with the permeability drop gradually slows down. Then, rock creep deformation enters the steady stage, leading to a slight permeability change. The third-stage permeability evolution is caused by the accelerated creep that only appears when the effective stress is excessed the yield stress. To clarify the competitive effects of multiple gas transport and rock deformation mechanisms on deep coal cleat permeability, a novel controlling mechanism diagram was proposed with three realms for the creep-dominated region, gas-pressure-dominated region, and the desorption-dominated region, respectively. The contributions of different gas transport mechanisms on permeability evolution during different pressure and time scales were further analyzed. Due to the analytical feature, this model can be easily inserted into fully-coupled numerical simulator to predict deep coal rock gas production.

Speaker: Dr Tao Zhang (Southwest Petroleum University)

15:05 Gas-water two-phase hydro-mechanical coupling simulation in deep shale considering nanomicroscale effects

The depth of deep shale gas reservoir is greater than 3500m, the initial liquid production of gas well is large and the flowback rate is high, accounting for the complex gas-water two-phase transport behavior. Besides, due to the characteristics of high pressure and stress in deep shale gas reservoir, the existing transport simulation method is no longer applicable. In this work, a hydro-mechanical coupling simulation method of gas-water two-phase transport in deep shale gas reservoir with respect to the pore, core, and field scale is proposed. First, the fluid storage state and transport behavior in different pore types during the gas–water two-phase transport process is investigated, with incorporations of 1) real gas transport controlled by Knudsen Number (Kn) and second-order slip boundary, 2) slip length for water phase transport, 3) a mobile water film with varying thickness due to rock-fluid interaction and 4) stress-dependence. Subsequently, the gas–water two-phase transport behaviors are upscaled from the pore to the core by incorporating nanomicroscale effects through fractal model. Next, an adaptive hybrid model is used to simulate the hydro-mechanical coupling in multi-scale fractured deep shale gas reservoirs, in which hydraulic fractures are modeled explicitly by using the embedded discrete fracture model, and micro-fractures are modeled by using the continuum models. Moreover, gas-water two-phase transport behaviors in fracture system is obtained in laboratory, and matrix core-scale transport behaviors are incorporated in the macroscale model. Finally, the influences of nanomicroscale effects, stress filed, bottom hole pressure and fracturing parameters on the production of shale gas reservoirs are discussed comprehensively. This study provides a practical method to estimate deep shale gas production by rigorously considering gas–water nanomicroscale effects and geological characteristics to reduce uncertainties during productivity evaluation.

Speaker: Dongying Wang (Petroleum Exploration and Production Research Institute, SINOPEC, Beijing, China)

15:05 Identification of coal facies and their impacts on pore structure characteristics of various coals in Sangjiang-Muling district

A systematic research was performed on the variation of coal facies and its effect on the pore structure of 38 coal samples were collected from Sangjiang-Muling basin with multiple techniques, including mercury intrusion porosimetry (MIP), micro-organic quantitative analysis, and fluorometric analysis fracture observation results. The mercury intrusion curves of coals in this area could be subdivided into two typical types, including type I (predominantly adsorption-pore), type Ⅱ (predominantly seepage-pore, and diffusion-pore). Three various coal facies, including shallow overlying water - weakly oxidized forest swamp facies, deep overlying water - substantial reduction of forest swamp facies and wet forest swamp facies, were distinguished by Q-cluster analysis and tissue preservation index (TPI)- gelification index (GI) and Wood index (WI)- groundwater influence index (GWI) plate correction. The results indicate that with the increase of TPI and WI, the number of adsorption-pore increase and the proportion of seepage-pore and diffusion-pore decrease. It means that the hydrodynamic of deep overlying water - active reduction of forest swamp facies are weak relatively because of reasonable high TPI and GI and coalbed methane (CBM) reservoirs are likely to be formed in this coal facies due to the abundant adsorption-pore. Thus this study could provide a basis for the optimization of favorable areas in CBM reservoirs.

Speaker: Dr Yuejian Lu (Nanchang Institute of Technology)

15:05 Improving the prediction accuracy of numerical simulation in high water cut period using dynamic residual oil saturation

For oil fields in the ultra-high water cut period (fw>90%), the numerical simulation water cut is higher than the actual production water cut, which cannot represent the true potential. Water flooding experiments with high displacement pore volume（PV） multiple confirmed that the residual oil saturation continued to decrease with the increase of displacement PV. The relative permeability used in conventional numerical simulations is the result of smaller displacement multiples (within 50 PV). A further decrease of residual oil saturation at high displacement multiples (500 or even 2000 PV) will result in larger prediction errors. Since the residual oil saturation is constantly changing with the development of the oil field, the fine numerical simulation in the ultra-high water cut period requires dynamic residual oil saturation to improve the accuracy and reliability of model prediction.
In order to solve the above problems, we carried out 2000PV displacement experiment, and a set of fine reservoir numerical simulation process integrating core experiment, logging, performance and geological knowledge was established. The following is the detailed workflow:
1)Using 27 sets of 2000PV high-multiple displacement experimental data, combined with the correlation between irreducible water saturation and permeability, the formula for the change of residual oil saturation Sor with PV number under different physical properties and crude oil viscosity was established. Comparing the calculation result of this formula with the experimental data not participating in the formula fitting, the error is less than 10%.
2)In the process of numerical simulation, calculate the displacement PV multiple of each time step and bring it into the residual oil saturation expression in step 1, recalculate the interphase infiltration endpoint, update the interphase infiltration, and perform cyclic calculation.
3)In the ultra-high water cut period, use the logging data of key wells to perform saturation fitting, modify static parameters, and adjust the final residual oil saturation change formula to complete the entire history fitting.
Studies have shown that the oil saturations behind the flood is reduced from 0.26 to 0.15. Through dynamic fitting of residual oil saturation, the fitting effect of the oilfield in the ultra-high water-cut period becomes better, the remaining oil distribution has changed from the previous understanding, the sweep height becomes smaller than before, the oil saturation in the flooded area decreases. The research results have supported the addition of 20 wells in the oilfield, which is expected to increase recoverable reserves over 10Million barrels.
This paper establishes a time-varying fine reservoir numerical simulation technology in the high water-cut period. Using dynamic residual oil saturation and fitting process control, the fitting accuracy of the model in the high water cut period is improved, and get deeper understanding of remaining oil.

Speaker: Yifan He (CNOOC)

15:05 Influence of microplastic on the complex conductivity of river sediments

This study utilized an improved sand column experimental setup to investigate the effects of microplastic on Yangtze River bank sediments. The experiments conducted included Darcy experiments, electrokinetic experiments, and wettability experiments, together for the same sample. By varying the particle size of the microplastics in the samples, we were able to observe different response of the electromagnetic properties as well as hydrogeophysical parameters in the samples.
Results show that increasing the mass fraction of mixed microplastics generally resulted in a significant decrease in sample electrical conductivity associated with an increase in permeability. These were expected to be due to the weak conductivity and strong hydrophobic properties of plastic particles, as well as the small adhesive forces between particles, which increased the pore space of the sediments and ultimately increased permeability. However, an anomalous increase trend was observed when decreasing the particle size of the mixed microplastics. Under this condition, increasing the concentration of same size plastic particles enhanced the electrical conductivity of the sediment sample. This anomaly phenomenon was reflected in both permeability and wettability, resulting in a decrease in sample permeability and a significant increase in sample hydrophobicity. Our observations using optical microscopy revealed two types of microplastic distribution in the sediments: one case was that microplastic particles were distributed within sediment pores and they did not touch each other, the other was that they were adsorbed onto sediment particle surfaces. We hypothesized that changes in the existence form of microplastics altered the double-layer structure of sediments, ultimately changing their hydrogeophysical parameters. This work has significance and relevance for electromagnetic-based characterization of microplastic-filled porous materials; for example, estimation of microplastic abundance in sediments.

Speaker: Shuai Li (China University of Geosciences)

15:05 Integrating LUCAS data with AI-driven models for predicting soil Salinization across the EU

Soil salinization influences vegetation, biodiversity, crop production, land-atmosphere interactions, soil health and ecosystem functioning. Quantifying soil salinity is essential to mitigate its determinantal effects (Hassani et al., 2020; 2021). This study utilizes an AI-driven approach for the quantification of soil salinity in EU using a wide range of environmental covariates including soil properties, terrain attributes, climate, and remotely sensed variables. Soil salinity point data from the LUCAS survey (2015 and 2018) were used for the training and validation of the models. Different algorithms were employed in our analysis including Random Forest, LightGBM, and XGBoost, with XGBoost demonstrating superior accuracy in predicting soil salinity across EU. The predictive model output is a gridded dataset illustrating the spatial and temporal variations of soil salinity, with corresponding uncertainty maps. This work represents one of the first attempts to integrate LUCAS data with AI models, aiming to generate soil salinization maps specifically designed for EU soils. The outcome will contribute substantially toward devising necessary action plans for protection of EU soils against salinization and degradation which is at the heart of the European Green Deal, Paris Agreement, and the United Nations Sustainable Development Goals especially UN SDG15.

Speaker: Nima Shokri (Hamburg University of Technology)

15:05 Liquid hydrodynamics in porous structures manufactured by additive technic

Cheverda V.V., Lukyanov A.A, Vozhakov I.S.
Kutateladze Institute of Thermophysics SB RAS, Novosibirsk 630090, Russia
Novosibirsk State University, Novosibirsk 630090, Russia

Flow and heat transfer in porous media for liquids and gases are widely encountered in nature and industrial applications. In nature, during the flow of oil and gas in porous rocks. In pharmaceuticals, pore flow occurs during the filtration of solutions. In the energy sector, heat exchange in pores is used in heat pipes for effective cooling of heat-loaded devices. This solution is used in microelectronics, on spacecraft, and for cooling LEDs.
Using a photopolymer printer, several porous cylinders were made from star-shaped structures (Fig. 1a). The size of the stars was changed so that the diameter of the inscribed sphere was 0.2, 0.4 and 0.8 mm. From these elements, cylinders with a diameter of 14 mm and a height of 24 mm were created (Fig. 1b and c).
This cylinder was fixed into a tube through which liquid was pumped at a given flow rate. The pressure difference is recorded using pressure sensors.
The obtained experimental results are compared with the numerical model. The calculation is carried out using the OpenFOAM open source code using the simpleFOAM single-phase solver. The porous cylinder simulation in OpenFOAM was carried out using the Darcy Forchheimer porous media model, which allows you to add a porosity zone to the fluid domain without any additional numerical effort. Knowing the velocity-dependent pressure values, we can calculate the model coefficients and set the required porosity. In our case, we use the assumption that the flow direction has only one preferred direction. Then the model coefficients were set high in the other two directions to completely block the flow through them. The computational domain was a cylinder 24 mm long and 14 mm in diameter. The speed at the channel inlet and outlet was set in accordance with the specified pressure drop. The conditions of non-leakage and slippage were established on the walls. The total number of grid elements is 100 thousand. Satisfactory agreement is shown.

Acknowledgments
This work was carried out under state contract with IT SB RAS (122022800489-6).

Speaker: Mr Vyacheslav Cheverda (IT SB RAS & NSU)

15:05 Machine-learning-based forecasting model for nanoparticles controlling oil-water interface performance

Active nanofluids are colloidal systems composed of water-based active nanoparticles, garnering significant attention for their outstanding performance in enhancing the recovery efficiency of ultra-low permeability oil reservoirs. Currently, the mechanisms underlying the adsorption and oil film detachment at the oil-water interface by active nanoparticles remain unclear. Simultaneously, the lack of precise and efficient methods for the design and performance prediction of nanoparticle materials constitutes the core issue inhibiting the enhanced oil recovery potential of active nanofluids.. This study aims to dissect the behavioral rules of active nanoparticles at the oil-water interface and establish a predictive model for the interface-regulating performance of nanoparticles.
Conducted molecular dynamics simulations to investigate the adsorption and oil film detachment rules of active nanoparticles at the oil-water interface, introducing the binding energy ratio for the evaluation of adsorption contact angles. Concurrently examined the influence of different oil phase components on the regulatory rules of nanoparticle behavior at the interface and established a quantitative relationship between adsorption contact angles and oil film detachment effects. Utilizing the aforementioned simulation methodology, constructed a database of nanoparticle-regulated oil-water interface samples. Subsequently, trained an artificial neural network model, establishing a machine learning-based predictive model for the interface-regulating performance of nanoparticles.
The simulation results dissected the regularities of adsorption and oil film detachment of active nanoparticles at the oil-water interface, offering guidance for the design of active nanoparticles. The adsorption and oil-stripping effects were found to increase initially and then exhibit a diminishing trend with the augmentation of alkane chain length and density. Through the training of a neural network on a sample database, a machine learning-based predictive model for the interface-regulating performance of nanoparticles was established. Predictive comparisons with practical examples validated the model's effectiveness and accuracy. The model is designed to investigate and predict the adsorption and oil-stripping effects of active nanoparticles at the oil-water interface.
The primary significance of this study lies in the coupling of molecular dynamics simulations with machine learning, dissecting the behavioral rules of active nanoparticles at the oil-water interface. Simultaneously, it establishes a predictive model for the interface-regulating performance of active nanoparticles. This work is poised to facilitate the application of active nanoparticles in enhancing oil recovery in ultra-low permeability reservoirs, enabling more effective decision-making in oil displacement and recovery strategies.

Speaker: Dongming Li (中国石油大学（华东）)

15:05 Microfluidic visualization of asphaltene deposition under high temperature

The goal of this study lay in the evaluation of the asphaltene deposition on the artificial 2D porous structure of the carbonate rock using high-pressure and high-temperature (HPHT) microfluidic technology. Such technology was utilized to evaluate the behavior of heavy oil quickly and effectively under reservoir conditions, on par with traditional tests. Our workflow started with the designing of microfluidic chip structure. Based on computed tomography data, a unified geometry of the porous space was developed, with pores and pore throats close to the target formation. The resulting design was realized as a silicon-glass microchip that can withstand high temperatures (up to 350°C) close to the formation during steam injection. In the first step, the dead heavy oil was injected into the whole microfluidic system at the ramped temperature. Later, high-viscous oil was displaced by the solvent, and then the precipitated heavy fractions were analyzed with microscopy. The microfluidic experiments were conducted under four different temperature conditions. At stages of 50 and 110°C, during displacement of heavy oil with n-heptane, there was no attenuation of filtration or precipitation of heavy fractions. The permeability of the microfluidic chip was found to decrease as deposits formed in the filtration channels during the third stage of the experiment at 170°C. The deposition of heavy fractions was confirmed by visual inspection of the microfluidic channels and analysis of the deposited material using scanning electron microscopy (SEM). The nature of a deposition was established by comparing the image in white and fluorescent light. Precipitation of an organic nature (asphaltenes) fluoresced, while deposits that did not fluoresce were mechanical impurities. For the last test, a new clean microchip was utilized, where displacement at 300 °C resulted in a similar blockage of the channels by asphaltenes and fine mechanical impurities (particle size less than 3 microns). Overall, the results suggest that temperature plays a crucial role in asphaltene deposition for heavy oil. These findings have valuable implications, since asphaltene deposition is a significant problem during oil production and transportation. The conducted experiment has demonstrated its effectiveness for studying the behavior of high-viscous oil at elevated temperatures using HPHT microfluidic technology. Further studies are needed to investigate the underlying mechanisms of asphaltene deposition, develop effective strategies to mitigate this problem, and conduct the sensitivity analysis to bring new insights to the effective heavy oil reservoir development.

Speaker: Dmitrii Pereponov (Skolkovo Institute of Science and Technology, LABADVANCE LLC)

15:05 Numerical study of the gas-liquid separation of cryogenic fluids with porous structures

Tianhao Yi, Ran Xu, Chengcheng Chen, Guang Yang*, Jingyi Wu

Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University, Shanghai 200240, China

*Corresponding author: y_g@sjtu.edu.cn

Abstract
Gas-liquid phase separation based on the porous media is vital for the stable operation of rocket engines in microgravity. To reveal the mechanism of nonisothermal phase separation with the porous media, a pore-scale numerical simulation is conducted to investigate the gas breakthrough at the porous array structure. Liquid oxygen and oxygen vapor are taken as the working fluids. The phase-field method is adopted to capture the gas-liquid interface. The influences of the inlet temperature and solid-liquid heat transfer on the flow characteristics are investigated. The results show that the bubble size increases rapidly under superheated inlet temperature when compared to that under subcooled inlet temperature. Without considering heat transfer, the critical pressure increases with the increase of the inlet temperature. Under subcooled inlet temperature, the condensation rate is reduced with the increase of the heat flux, and even the evaporation rate is stronger than the condensation rate. The bubble breaks into small daughter bubbles easily under high heat leakage due to the increasing size. The transit time is dependent on the bubble behavior, which is related to the driving pressure, inlet temperature, and heat leakage. The synergetic effect of inlet temperature and heat flux on the critical pressure shows that the critical pressure is more dependent on the inlet temperature when compared with the heat leakage.

Keywords: cryogenic propellants, phase change, porous structure, critical pressure, phase-field method

Acknowledgements
This work is supported by the National Natural Science Foundation of China (Grant Nos. 52276013 and 51936006)

Speaker: Mr Tianhao Yi (Shanghai Jiao Tong University)

15:05 On the role of the semantic information for improving super-resolution of a low-resolution 3D rock image from a few slices of high-resolution 2D images

Obtaining high-resolution 3D images for rock samples is important for the quantitative characterization of their pore structures and is challenging while preserving samples. But this can be realized cost-effectively by applying deep-learning multimodal style transfer model via GAN on paired images with suitable loss functions that helps archive super-resolution and encourage perpendicular slice continuity at the same time on a given low-resolution 3D image and a few aligned slices of high-resolution 2D images. We found this approach can be significantly enhanced aided by the semantic information of slices of the low-resolution 3D image, which encourage the correct discrimination of high frequency information at sub-images. Here we explain our new model in which the semantic information is employed and show the effects on the reconstructed high-resolution 3D images, in particular, pore morphology with and without using the semantic information on a synthetic image dataset, and reveal the implication of mis-reconstruction of pores on estimating the pore spatial connectivity and flow fields. Our work indicates a direction to improve deep-learning based super-resolution 3D image reconstruction.

Speaker: Liguo Niu (Qingdao University of Science and Technology)

15:05 Organic matter–oil adhesion force and ultimate flow distance of adsorbed oil in shale reservoirs

In China, continental shale oil reservoirs are featured with extremely low porosity and permeability, where oil is greatly subjected to solid–liquid adhesion force. The organic matter–oil adhesion force plays a crucial role in shale oil occurrence and movability in shale reservoirs. To effectively characterize the organic matter–oil adhesion force, this paper presents an AFM testing method to measure the adhesion force and derives the formula of pressure distribution with the adhesion force as the major flow resistance. It is found that organic matter shows the largest roughness, followed by felsic; and pyrites and interstitial materials show the smallest roughness. Organic matter exhibits larger average grain size, but smaller pore number than felsic. Given a similar organic matter maturity, the organic matter–oil adhesion force decreases with increasing content of light components. If pore wall length in organic matter is larger than the ultimate flow distance, adsorbed oil will not be desorbed to form free oil; on the contrary, adsorbed oil will be desorbed and turn into free oil. Hydraulic fracturing can raise reservoir pressure and the ultimate flow distance of adsorbed oil, thus allowing more adsorbed oil to be produced.

Speaker: Dr Rui Shen (Research Institute of Petroleum Exploration & Development, PetroChina Company Limited)

15:05 Pore-scale investigation of the influence of gas mixing on He/brine and CO2/brine wettability using Microfluidics: Implications for CO2 and H2 geo-storage

Geological storage of hydrogen (H2) and carbon dioxide (CO2) is pivotal for a successful energy transition toward a diversified low-carbon economy and a net-zero emission future. The wettability of reservoir rocks in the presence of formation fluids and H2 or CO2 is a controlling factor of gas mobility, residual trapping, and efficient storage. However, the influence of different brine types (salt type and concentration) and gas contamination on wettability is rarely reported in the literature.
Therefore, we present the results of a set of experiments using a microfluidic chip of different diameters (50, 70, 90, 110, and 130 µm) measuring CO2/brine, N2/brine, and He/brine advancing, receding, and static contact angles for the same brine type and mixing ratios (20%, 50%, and 80%) at constant conditions (P=14.7 atm and T= 22 °C). The helium was used as an analogy for hydrogen to avoid any safety complications. The experiments were conducted using a constant brine rate at 0.1 µL/min during imbibition. A sophisticated Matlab code was built to measure contact angles from live videos of the microchips, allowing the generation of multiple data points with controlled upscaling.
The measurements indicate the channels are strongly water-wet for all gases with CO2 being the highest water-wet. All the dynamic contact angles decreased with increasing channel diameter from 50 to 130 μm. The measurements were validated with similar experimental approach in the literature. The CO2, N2, and He contact angles increased with increasing the mixing ratios from 10% to 50%. Higher hysteresis was observed with a higher mixing ratio, indicating a significant impact of contamination on the storage process.
The presented experimental approach depicts a time-effective technique to investigate crucial influencing parameters using microfluidic chips for effective and successful underground H2 and CO2 sequestration.

Speaker: Amer Alanazi

15:05 Porosity Prediction of Shale Oil Reservoirs Based on Machine Learning-The Case of Long 7 Shale Oil Reservoir in Ordos Basin

Based on the measured logging data of shale oil reservoirs in Ordos Basin, this paper compares the porosity of shale oil reservoirs affected by different degrees of parameters, and analyzed by the Pearson correlation coefficient, it is found that the porosity of reservoirs has a certain degree of correlation with the logging parameters such as acoustic time difference, compensated neutron, and density. Aiming at the problems of low prediction accuracy, high cost and long calculation time of traditional methods, a machine learning algorithm is introduced to establish a porosity prediction model, a random forest model with the highest accuracy is preferred, and the model accuracy is further improved by the PSO optimization algorithm, and the results show that the model has a high accuracy in the prediction of porosity in shale oil reservoirs. Meanwhile, the LIME local interpretation method and SHAP global interpretation method are used in this paper to interpret the model prediction results. By comparing the comparison of the influence degree of LIME and SHAP local interpretation for two horizontal wells a and b, it is proved that different interpretation methods can get reasonable and credible local interpretation results. Meanwhile, the results of SHAP global interpretation are analyzed in this paper, which show that acoustic time difference, compensated neutron, and density are the main factors affecting the model, and they are basically consistent with the results of Pearson correlation coefficient analysis.
In summary, this paper improves the accuracy of the porosity of shale oil reservoirs through the analysis of measured logging data and machine learning algorithm modeling, and analyzes the interpretability of the model, which provides a reference basis for the identification and further development of shale oil reservoirs.

Speaker: Yawen He (Copyright©Department of Geology, Northwest University)

15:05 Quantitative characterization method for residual oil distribution in heavy oil after multi-cycle steam huff and puff based on CT scanning

1. Objectives/Scope
   Steam huff and puff is an important development method for heavy oil reservoirs. An accurate description of the remaining oil distribution after steam huff and puff is crucial for guiding subsequent reservoir development. In this study, a new experimental apparatus was used to simulate the multiple cycles of steam huff and puff process more realistically. The occurrence state and distribution of remaining oil after different cycles of steam huff and puff were investigated.
2. Methods, Procedures, Process
   Laboratory experiments usually employ displacement to simulate steam huff and puff. In this study, a low-density and temperature-resistant material was used innovatively as the sand pack model, enabling multi-cycle steam huff and puff and in-situ CT scanning. The experimental procedures include steam injection, soaking, and recovery, with CT scanning of the sand pack model after each cycle. Based on characterization parameters such as shape factor and Euler number, the microscopic remaining oil is classified into network-like, cluster-like, film-like, and isolated droplet-like remaining oil. The proportions of these different types of remaining oil are compared after each cycle.
3. Results, Observations, Conclusion
   The viscosity of the heavy oil used in the experiment is 800 mPa·s (25℃). The statistical results indicate that as the number of cycles increases, the proportion of network-like remaining oil decreases, while the proportions of cluster-like, film-like, and isolated droplet-like remaining oil increase. From the first to the seventh cycle, the proportion of network-like remaining oil decreases by 34.11%, while the proportions of cluster-like, film-like, and isolated droplet-like remaining oil increase by 12.84%, 14.48%, and 6.76% respectively. The remaining oil transitions from a continuous distribution to a discontinuous distribution. This is because during steam injection, steam and heavy oil enter the intermediate container. During the soaking phase, steam is converted into hot water, forming an oil-water mixture with the oil. In the production phase, the oil-water mixture enters the sand pack, causing the network-like remaining oil to transform into cluster-like, film-like, and isolated droplet-like remaining oil, resulting in the discontinuous distribution of remaining oil. With an increase in the number of cycles, the water saturation increases, and the distribution of remaining oil becomes more dispersed.
4. Novel/Additive Information
   In this study, a new physical experimental model was developed to simulate the multi-cycle steam huff and puff process of heavy oil realistically. In-situ CT scanning technology was employed to quantitatively characterize the distribution of microscopic residual oil. This research guides the subsequent cold production of heavy oil.

Speaker: Haoyu Zheng (China University of Petroleum (East China))

15:05 Research and application of key physical parameters and properties of porous media materials

Compared to continuous media materials, porous media materials have the characteristics of low relative density, high specific strength, large specific surface area, lightweight, good sound absorption and sound insulation performance, good thermal insulation, and good permeability. Its preparation methods are diverse, from template method to 3D printing technology, and its applications are also diverse, from new energy to biology. By controlling the porous structure, we can obtain more porous materials with excellent performance, and the application of metamaterial structures provides new opportunities for the development of porous materials. To understand and control the performance of porous materials, it is necessary to grasp the basic physical properties of porous materials and establish their theoretical models and analysis methods. This article studies the basic physical parameters that affect the sound propagation characteristics of porous media (such as porosity, airflow resistivity, tortuosity, viscosity and thermal characteristic length, Young's modulus, Poisson's ratio, damping loss factor, etc.) through the theory of sound propagation in porous media (Biot theory), and further elaborates on the classic Biot acoustic model. These parameters not only affect its acoustic performance, but also its thermal, optical, and electrical performance. Finally, we will introduce the techniques and methods for obtaining these physical parameters, as well as their applications in engineering.

Speaker: Mr Jinxiang Pang (ProBiot Group)

15:05 Retention Mechanism of Residual Oil in Different Pore-Throat Structures Under High-Flux Water Displacement Using Pore-Scale Two-Phase Flow Simulation Considering Dynamic Contact Angle

Objectives/Scope（25-75words）
High-flux water displacement is one of the effective methods for low-cost development of mature oilfields. The wettability alteration under high-flux water displacement is the crucial reason for improving displacement efficiency, which makes complex flow characteristic in different pore-throat structures. The objective of this paper is to establish a high-flux water displacement pore-scale simulation method considering dynamic contact angle to determine the distribution pattern and retention mechanism of residual oil.

Methods/Procedures/Process (75-100words)
Firstly, the physical models of different pore-throat structures (200mD and 50mD) were constructed by the extraction of the casting thin-section images. Then, the pore-scale two-phase flow mathematic model coupling the Navier-Stokes equation and the Phase-Field equation was established to track the phase interface migration. Moreover, a dynamic contact angle equation was added to the model. Finally, the commercial software COMSOL is used to solve the model by finite element method (FEM). Especially, the injection rate set to 2.25×10-8m3/s, the simulation time of high-flux water displacement set to 800s (about 200PV), and the contact angle change rate set to π/1200 rad/s.

Results/Observations/Conclusions (100-200words)
The results show that the displacement efficiency after high-flux water displacement is significantly improved when considering the dynamic contact angle. For the high permeability reservoir (200mD) with large pores and better connectivity, the oil in small throats near the main streamlines started to be displaced when the contact angle drops to 4/9π. The cluster-type residual oil remain oil in the weak sweep area is partially driven out when the contact angle dropped to 1/3π. The residual oil saturation at 200PV is reduced by about 15% compared to that at 30PV (traditional water displacement experiment). There are three main streamlines parallel to the injection-production direction, and the residual oil is mostly cluster-type oil far from the main streamlines. For the low permeability reservoir (50mD) with narrower pores and poor connectivity, the residual oil saturation at 200PV is reduced by about 7% compared to that at 30PV. There is only one main streamline connecting the inlet and outlet, and the residual oil is widely distributed near the main streamline.

Novelty/Additive Information (25-75words)
In this paper, a pore-scale long-time simulation method was established by coupling a dynamic contact angle equation to characterize the retention mechanism of residual oil under wettability alteration during high-flux water displacement. The impacts of pore-throat structure and displacement flux on the distribution pattern of residual oil were analyzed, which could provide valuable insights for improving the oil recovery (IOR) of mature oilfields developed by water flooding.

Speaker: Gaofei Yan (中国石油大学（北京）)

15:05 Study on dynamic reservoir production history match based on spatial-temporal neural network proxy model

History match of oilfield production is an important means of obtaining accurate reservoir geological models. Traditional history match models are influenced by complex nonlinear relationships, high-dimensional data, and spatial-temporal dynamics, which makes it difficult to take into account the variability of the oilfield production and the accuracy of prediction is lower. Moreover, the solution process usually needs to resort to the numerical simulator of reservoirs, which is time-consuming and inefficient, and is difficult to be used for history match of large-scale oil reservoirs. In terms of the above issue, this paper proposes a surrogate model for reservoir numerical simulation based on convolutional spatial-temporal neural network (CSTN), which uses convolutional neural network (CNN) to learn input high-dimensional spatial parameters, and uses long short-term memory neural network (LSTM) to predict the production data for complex temporal dynamics. The model was used to 2-D and 3-D inhomogeneous reservoirs with nine injections and four producers, and the R² coefficient is introduced as the key evaluation index. The results showed that with the increase of the number of trainings and the amount of data, the loss function and the R² coefficient can be stabilize and converge quickly with less iterations, which confirms the accuracy and stability of the proxy model. The results for 2-D reservoir models after training show that the R² coefficient is as high as 0.98, in which the R² coefficient for the match of oil production is 0.985, and for the match of water cut, the R2 coefficient is 0.975. For 3-D reservoir models with complex geological structure after training show that the R² coefficient for the all indexes is 0.96, in which the R² coefficients for oil production rate and water cut are 0.97 and 0.95, respectively. The above match results show the presented proxy model can accurately describe the geological and fluid seepage characteristics of the oil reservoir, and it can realize highly accurate fitting of historical production data. In addition, in terms of computational speed, compared with the traditional history match method, the proxy model significantly reduces the computational cost, and the simulation time consumed is about 70% lower than that of the traditional method. In general, this study provides an efficient and accurate production history fitting method in the field of reservoir development, which can provide reliable support for improving reservoir production efficiency and formulating optimization strategies.

Speaker: Fankun Meng (Yangtze University)

15:05 Study on microfracture replacement mechanism of submerged reservoir based on digital core

Fractured reservoirs are more non-homogeneous, and micro-fractures are mainly used as seepage channels in the matrix rock mass, the traditional core replacement experimental method can not analyze the problems of replacement process and residual oil distribution characteristics within the core, etc. In this paper, we use the digital core technology to numericalize the core, classify it according to the degree of development of fractures and porosity, and simulate the results of replacement in the saturated oil state using LBM method, and analyze the effects of rock By adjusting the parameters, we analyze the influence of wettability, the degree of crack development and the driving pressure on the driving effect, and the results show that: for the dense bedrock, only a very small number of microcracks are developed, and the porosity is small and difficult to be communicated, so it can't be mobilized in the actual development; for the microcracks and dissolved pore cores, the water-wet is better than the oil-wet driving effect, and some of the small pore space can be mobilized, so surfactants and other surfactants can be adopted to optimize the development effect in the process of three times of oil recovery. The connectivity of cracks and pores has more influence on the replacement effect than the development degree, when larger cracks are developed, the water will be seen too fast, and the remaining oil will be enriched in the surrounding micro-cracks and pores, and the connectivity and homogeneity degree of crack development can affect the replacement effect even more. The fluctuation of the replacement pressure is not linear on the effect of replacement, when the replacement pressure is too large, the water flushing is more obvious, and the microfracture utilization is poor, through the regular adjustment of the replacement pressure, the microfracture utilization can be improved, and this study is of certain reference significance to the submerged fractured reservoirs in the current water injection development.

Speaker: Jiannan Zhao

15:05 Study on the Influencing Factors of N2-Water Alternating Huff and Puff Oil Recovery in Tight Oil Reservoir

Water huff-n-puff (WHP) is one of widely used methods to improve oil recovery for tight reservoirs. However, the poor flow-conductivity and low sweep efficiency in matrix also restrict its oil recovery performance. Herein, the N2-water alternating huff-n-puff (NWAHP) was put forward to improve oil recovery at reservoir conditions. firstly, the feasibility of which was confirmed by the comparison of NWAHP and WHP experiment. secondly, the effect on oil recovery of injection method, N2-water ratio (NWR), soak time and number of injected plugs were investigated. The results showed that the single-cycle oil recovery of NWAHP was 13.95%, which was 3.51% higher than that of WHP, and it can improve the effect of WHP very well. The N2-water injection process could delay the breakthrough of N2 during production due to the presence of water slug, resulting in a higher oil recovery than water-N2 injection. Increasing the NWR could enhance the elastic energy and sweep more oil into the matrix, but if the NWR was too high, N2 breakthrough would occur prematurely during production. Increasing the soak time could improve the diffusion distance of N2 in the core and the effect of water imbibition. Increasing the number of injected plugs could enhance the pressure during the injection process, thereby improve the swept volume of N2 and water.

Speaker: Dr Qiao Fan (China University of Petroleum (East China))

15:05 Study on the parameter in Unconventional Energy Reservoir Based on CT Scanning

Unconventional energy sources refer to forms of energy obtained through methods distinct from traditional approaches (Demirbas, 2016). These include not only renewable resources such as solar and wind energy but also less conventional sources like gas hydrate and tar sands. The significance of unconventional energy lies in its potential to diversify energy supplies and reduce dependence on conventional fossil fuels, marking a critical shift towards more sustainable energy practices.

The study of the micro-properties of unconventional energy reservoirs, as emphasized by Bera and Shah (2021), is essential for a comprehensive understanding of their intricate pore structures and the characteristics of fluid flow within these formations. This deep understanding is fundamental to refining extraction techniques, boosting energy recovery, and diminishing the environmental footprint of such activities. It underscores the importance of such studies in the realm of sustainable energy development.

In particular, the investigation of porosity in these reservoirs is of paramount importance. As Zou (2017) highlights, understanding the porosity is key to grasping the storage and permeability capacities of these reservoirs, which in turn has a direct and profound impact on the efficiency of resource extraction. High-precision porosity analysis is instrumental in evaluating the quality of these reservoirs and in formulating the most effective and sustainable extraction strategies.

The evolution of science and technology, particularly with the advent of electronic computing and the introduction of industrial CT (Computed Tomography) instruments, has offered robust technical support for the microscopic examination of various phenomena within the porous media of unconventional energy reservoirs. This technological progression has been pivotal in advancing our understanding and capabilities in this field.

Initially employed in the realm of medical diagnostics, where its revolutionary impact was first recognized by Seeram (2018) and Withers et al. (2021), CT scanning technology, specifically Medical CT (MCT), has since transcended its original application. At the close of the 20th century, the introduction of industrial CT instruments marked a new era in geological research. Pioneering studies by Roth et al. (1998) and Vogel and Roth (1999) employed specialized CT scanners to produce a series of detailed color images of soil bodies, representing a significant breakthrough in the field.

However, the early stages of CT application in geological research were not without limitations. The initial CT instruments suffered from low resolution when scanning samples, posing challenges for detailed quantitative analysis. This limitation underscored the need for continuous technological enhancements to improve the resolution and accuracy of CT imaging, thus enabling more precise and detailed investigations of porous media. The evolution of CT technology has since seen substantial improvements, leading to its current status as a powerful tool for micro-level analysis and characterization, particularly in the complex and varied contexts of unconventional energy reservoirs.

This paper aims to delve into the refined methodologies and applications of CT scanning in the microscopic characterization of the parameter within unconventional energy reservoirs, highlighting its pivotal role in enhancing our exploration of these critical energy sources.

Speaker: Tian Zhao (Chinese Academy Of Geologi­cal Sciences & CUGB)

15:05 Study on the pore-scale multiphase seepage characteristics of clayey-silt sediments

The sediment of natural gas hydrate reservoir in the South China Sea is primarily composed of clayey silt, exhibiting characteristics such as loose structure, lack of consolidation, high clay content, and complex pore structure. These features contribute to the complexity of reservoir seepage characteristics, making it challenging for conventional experimental methods to accurately describe the evolution of permeability and the main controlling factors. By combining seepage experiments with micro-CT, the seepage characteristics and distribution patterns of multiphase fluids at the pore scale are obtained. The results indicate that in single-phase water seepage experiments, the pore structure of clayey-silt samples undergoes creep as the seepage process progresses. With increasing seepage pressure, the pore and throat radius of the samples decreases, leading to a significant decrease in permeability. In gas displacement experiments, fluid in larger pores is initially displaced, and with increasing displacement pressure, water in smaller pores is further displaced. The gas phase permeability gradually increases, and when the displacement pressure exceeds the initial consolidation pressure, the sample generates the dominant flow channels composed of fractures. Once the dominant flow channels appear, the gas phase permeability remains constant. The two-phase relative permeability curves of the samples are obtained through gas-water displacement experiments, showing a narrow range of co-permeability for both phases, lower co-permeability point, and high bound water saturation. The research findings help clarify the multiphase seepage characteristics during the development of clayey-silt natural gas hydrate, providing theoretical guidance for improving recovery efficiency of hydrate reservoirs.

Speaker: Yuxuan Xia (China University of Petroleum, Beijing)

15:05 The displacement of immiscible two-phase fluids in a pore doublet system

Multiphase fluid flow in a pore doublet is a fundamental problem and is important for understanding the transport mechanisms of multiphase flows in porous media. During the displacement of immiscible two-phase fluids in a pore doublet, the transport process is influenced not only by the capillary and viscous forces, but also the channel geometry. In this work, a mathematical model and numerical simulations are presented for the two-phase fluid displacement in a pore doublet with considering the effects of capillary force, viscous force, and the geometric structure. These lead to new and more general analytical and numerical solutions for the pore doublet system, and it is found that the displacement process is dominated by the capillary number, viscosity, and radius ratios. The results can be used to explain and understand the preferential flows in porous media, such as for improving oil recovery from porous media; these are usually observed in oil recovery, groundwater pollution, and the geological sequestration of carbon dioxide.

Speaker: Dr Fang Shan (Huazhong University of Science and Technology)

15:05 The influence of cap rock and fault characteristics of saline geological layers on CO2 storage

CO2 can dissolve in salt water layers or undergo chemical reactions with minerals to achieve permanent storage. Compared with other storage ways, salt water layers have the advantages of wide distribution area, large thickness, fewer wells required for injection, low storage cost, and large storage capacity. Cap rock and faults are important barriers to prevent CO2 migration and leakage during the storage process of saline layers. The sealing characteristics of cap rock and faults are of great significance for large-scale engineering projects.
The storage mechanism of the cap rock includes three types: capillary sealing, hydraulic sealing, and overpressure sealing. There are many factors that affect the storage of the cap rock, among which the thickness of the cap rock indirectly affects the capillary pressure by controlling the adsorption resistance, thereby determining the difficulty of fluid discharge inside the cap rock, which is one of the main factors affecting the sealing of the cap rock. Taking the total thickness of the cap rock and the single thickness of the layers inside the cap rock as objects, simulate and analyze the impact of cap rock sealing on CO2 storage. The results show that as the thickness of the cap rock increases, the continuity of CO2 in both horizontal and vertical directions increases, and the accumulation of CO2 near the cap rock decreases, reducing the risk of CO2 leakage; When the thickness of the cap rock is constant, the larger the thickness of the internal single layer, the better the sealing of the cap rock.
When the fault is adjacent to the target storage layer, on the one hand, with the injection of CO2, the fault is induced to activate, leading to the problem of fluid leakage along the activated fault. On the other hand, the influx of CO2 into a fault can lead to an increase in pore pressure at the fault plane. When the pore pressure at the fault plane exceeds the shear stress along the fault plane, it can induce fault activation and sliding. Characterize the impact of fault characteristics on CO2 sequestration using fault development location, fault morphology, and fault permeability as variables. The further away the fault is from the injection well, the lower the saturation of gaseous CO2 within the fault, and the later the saturation of gaseous CO2 begins to increase, resulting in higher storage safety. The extension distance of the fault increases, and the distribution area of gaseous CO2 saturation within the fault increases. The more predicted CO2 leakage, the lower the storage safety. If a fault has a certain permeability, as the permeability of the fault increases, there is no significant change in the time when CO2 leakage begins, and the amount of CO2 leakage increases. However, compared to the location of fault development and the distance of fault extension, the impact of fault permeability on storage safety is relatively small.
Based on results, a method for evaluating storage effect has been established, and injection parameters under different conditions have been optimized.

Speaker: Fengpeng Lai (China University of Geosciences Beijing)

15:05 The influence of grain size on permeability in porous media based on digital core technology

The grain-filled porous materials are widely used in earth science, chemical engineering and other fields. The grain size distribution affects the size, shape, connectivity and heterogeneity of pore space, and has a significant impact on permeability. The relationship between pore structure and permeability is studied based on grain packing model. Firstly, the process-based method is used to simulate the grain packing materials, and different pore space structures are obtained by changing the grain size distribution. The pore network model is used to simulate the fluid flow and calculate the permeability of these models. The results indicate that the permeability of the model increases with the increase of the average grain radius. The exponential equation can fit the relationship between porosity and permeability well. In addition, the relationship between the specific surface area and the permeability can be fitted by the exponential equation. There are inseparable relationship between permeability and pore structure parameters in granular porous materials. The study provides a reference for understanding the permeability of porous materials.

Speaker: Prof. Xiaobin Li (Northeast Petroleum University)

15:05 The influence of matrix lower limit on structure and flow characteristics in tight oil reservoir

The formation space of tight oil reservoir is complex, which develops both matrix pores and micro-fractures, and the classification of matrix pore lower limit has an important influence on the structure and flow characteristics of tight oil reservoirs. In this paper, CT scanning method is used to acquire representative 3D grayscale images of matrix and micro-fracture samples in tight oil reservoir respectively, and the corresponding matrix pore and micro-fracture network models are extracted by the maximal ball method. Based on the matrix pore and micro-fracture network models with the same physical size, network superposition method is introduced to construct the tight oil reservoir network models by adding virtual connected throats, and the superimposed network could contain the structural characteristics of both matrix pores and microfractures. By setting different lower limits of matrix pore diameters, the matrix pore network with different lower limits are developed and the corresponding tight oil superimposed networks are constructed. It can be found that, as the lower limit of matrix pore diameter increases, the distribution curves of pore and throat diameter in matrix system keep shifting to the right, the average coordination number keeps decreasing, which shows poor connectivity. The contribution of matrix system to formation total porosity slightly decreases but does not change much, the contribution of matrix system to formation total permeability keeps decreasing; the imbibition relative permeability curve of oil phase keeps shifting to the right, and the imbibition relative permeability curve of water phase keeps shifting to the left, and the oil-water co-flow zone keeps decreasing.

Speaker: Chenchen Wang (Yangtze University)

15:05 The investigation of shale dynamical spontaneous imbibition with hydration damage and its influence on mechanical property

Shale gas development is relied on long horizontal drilling. But shale is typical formation that wellbore instability often occurs, restricting long horizontal drilling in shale reservoir. Hydration damage is a major trigger of borehole collapse in shale. During drilling process, spontaneous imbibition (SI) is one of main methods of water phase entering into shale. After this invasion, hydration between water and clay happens, forming damage effect. Currently, there are plenty of works about shale hydration mechanism, but research of connection between SI and hydration is rare. The understanding of shale hydration evolutionary law during SI is not deep enough, restricting the improvement of drilling quality in shale reservoir.
Therefore, in combination with SI test and rock mechanical test, based on damage mechanical theory, characteristics of shale SI and hydration damage evolutionary law during SI have been clarified. The dynamical model of shale SI has been established considering hydration damage. Also, constitutive model of shale hydration damage during SI has been built. The analysis of shale SI process and energy response law in loading have been conducted. Results indicate that shale has strong SI in earlier stage, and the imbibition gradually becomes stable at later stage. Due to the influence of hydration, driving forces of SI (capillary force and osmotic pressure) are both in dynamical process. Resistance of SI gradually declines due to hydration damage, which is beneficial for shale SI. Besides, compared to conventional model, dynamical model of SI is more consistent with test results, proving hydration is a major factor of shale SI. In addition, shale damage degree is consistent with degree of SI. During SI process, hydration crack starts to propagate, decreasing mechanical strength and leading to the change from brittleness to plasticity. With increasing imbibition time and hydration degree, total energy, elastic energy and dissipated energy all show decline, indicating the decreasing mechanical stability. Outcomes improve the understanding of shale mechanical behavior, offering theoretical support for high efficiency and safety of long horizontal drilling technique in shale gas reservoir

Reference:
[1] Meng M, Ge H, Shen Y, et al. The effect of clay-swelling induced cracks on imbibition behavior of marine shale reservoirs[J]. Journal of Natural Gas Science and Engineering, 2020, 83: 103525.
[2] Fanhui Z, Zhang Q, Jianchun G U O, et al. Mechanisms of shale hydration and water block removal[J]. Petroleum Exploration and Development, 2021, 48(3): 752-761.

Speaker: 乙 丁 (西南石油大学)

15:05 The Wettability Evolution Process and Mechanism of Deep Tight Sandstones Controlled by Diagenesis: A Case Study from the Dongying Sag, Bohai Bay Basin

Abstract: Wettability plays a crucial role in the percolation capacity of deep tight sandstone reservoirs. Due to great variations in fluid properties, mineral types, and compositions during diagenetic evolution processes, the wettability evolution process and its control mechanism remain unclear, which limits the understanding of hydrocarbon accumulation in deep tight sandstones. In the present study, the upper submember of the 4th member of Shahejie Formation in Dongying Sag, Bohai Bay Basin is targeted to systematically analyze the influence of diagenesis on deep tight sandstone reservoir wettability. A combined method including cast thin sections, X-ray diffractions, high-temperature and high-pressure Amott wettability experiments attached to a nuclear magnetic resonance equipment, and high-temperature and high-pressure solid-oil-water contact angle experiments. The results show that the different types of pores have been generated in different diagenetic stages. From A-stage eodiagenesis to B-stage mesodiagenesis, the compaction residual pores, dissolution pores in feldspar and dissolution pores of carbonate, dissolution pores of quartz margin, dissolution pores in feldspar and dissolution pores of carbonate, fractures wee formed in sequence. With the ongoing diagenesis, the water wetability of residual intergranular pores, the dissolution pores of quartz margin and the dissolution pores in feldspar are enhanced, while the dissolution pores of calcite become more oil wetting, and the dissolution pores of dolomite change from water wetting to intermediate wetting. In addition, the main pore types developed at different diagenetic stages and their surface wetting characteristics determine the overall wettability of deep tight sandstone. Overall, the deep tight sandstone is mainly characterized by water ettability, which is changed from strong water wetting, weak water wetting, water wetting, intermediate wetting, to water wetting from A-stage eodiagenesis to B-stage mesodiagenesis. A wettability evolution model for deep tight sandstone reservoirs controlled by diagenesis is established, which holds significant implications for predicting sweet spots in deep tight sandstone reservoirs.
Key words: Jiyang Depression; Beach-bar Sand; Deep Reservoirs; Diagenesis; Magnetic Resonance Imaging

Speaker: Xin Wang

15:05 Wetting Dynamics of Spontaneous Imbibition in Layered Petroleum Reservoirs

The understanding of the multiphase flow of fluids in porous rocks is important in many applications, particularly for oil recovery from petroleum reservoirs due to viscous, gravitational, and capillary forces. This study examines the spontaneous imbibition process, which is the invasion of the wetting liquid into a porous solid displacing resident non-wetting fluid by capillary action. In this work, we present a numerical solution in 1-D using fractional flow theory assuming horizontal displacement in co-current mode. It can be understood as the capillary analog to the classical Buckley Leverett solution and is valid with arbitrary fluid viscosities, as well as for capillary pressure and relative permeability curves dependent on saturation. We measure the saturation profiles as a function of distance and time with some initial wetting fluid saturation for strongly water-wet, mixed wet, and weakly water-wet cases. The simulation results obtained using MATLAB Reservoir Simulation Tool (MRST) show a good match with the results of the analytical solution provided in the literature. We observed that the fluid propagates with different velocities in non-interacting layers of different wettability conditions and with different petrophysical properties such as permeability and porosity. We also examined the effect of the interactions of the layers in two- and three-layered reservoirs on the fluid flow and saturation front. For a single layered case, using a particular dataset the WWW (Weakly Water wet) reservoir has a leading front, and the MW (Mixed Wet) reservoir has a lagging front. However, when both these layers are in interaction with each other, the front of the layer which has MW wettability (having a lagging front when non-interacting), has a sharp increase while the layer which has WWW wettability (having a leading front when non-interacting), the front has reduced length. Also, in the case of the interacting layers, both fronts are almost at the same location. The solution can also be used to understand fluid flow behavior when capillary forces are dominant i.e., after the gas injection stops during the geological CO2 sequestration in the petroleum reservoirs.

Speaker: Mr Akshit Agarwal (Indian Institute of Technology Delhi)