Name: InterPore2023
Start: 2023-05-22T09:00:00+01:00
End: 2023-05-25T20:20:00+01:00
Location: No location set

InterPore2023

from Monday 22 May 2023 (09:00) to Thursday 25 May 2023 (20:20)

Monday 22 May 2023
09:10 Porous Graphene Oxide Macrostructures for Water Treatment Applications - Nathalie Tufenkji
Porous Graphene Oxide Macrostructures for Water Treatment Applications ((MS24) Invited and Plenary Sessions)
- Nathalie Tufenkji
09:10 - 09:50
Providing clean, safe water reliably in an affordable manner is a major global challenge. A wide variety of water pollutants, including heavy metals, dyes, pesticides, and pharmaceutical compounds pose a threat to public and environmental health. Existing water treatment technologies do not adequately meet water quality standards for removal of the diverse range of contaminants; thus, technological innovation is needed to enhance water security and accessibility. Engineered nanomaterials, such as graphene oxide (GO), offer tunable multifunctionality for effective removal of a diverse range of contaminants from water. However, the practical implementation of nanomaterials such as GO in water treatment requires their immobilization into three-dimensional macrostructures which may impair their performance. Unlike colloidal nanomaterials, solid macrostructures of GO can be easily stored, transported and manipulated. Despite the progress on forming high surface area and multifunctional GO macrostructures, synthesizing mechanically robust porous macrostructures, especially for wet applications, is a challenge. This talk will describe approaches for the preparation of GO-based macrostructures that can be used in water treatment. The functionalization of macrostructures of engineered nanomaterials with antimicrobials for prevention of biofouling or removal of pathogens from contaminated waters will also be discussed.
10:50 1.1
1.1
10:50 - 12:35
Contributions

10:50 Effect of rock heterogeneity on pore-scale fluid displacement in a layered sandstone for underground hydrogen storage - Zaid Jangda (Heriot-Watt University)

11:05 Ostwald Ripening Investigation using 3D Micro-CT Imaging - Waleed Dokhon (Imperial College of London)

11:20 Energy Storage in Unconventional Formations - Hanin Samara (Institute of Subsurface Energy Systems-Clausthal University of Technology)

11:35 Impact of capillary pressure hysteresis on Underground Hydrogen Storage - Farzaneh Nazari (The University of Manchester)

11:50 Visualizing the Effect of Gravity on Hydrogen Redistribution at Pore Scale - Omid Shahrokhi (Heriot-Watt University)

12:05 Trapping, Hysteresis and Ostwald Ripening in Hydrogen Storage: A Pore-Scale Imaging Study - Sepideh Goodarzi

12:20 Microfluidic hydrogen storage capacity and residual trapping during cyclic injections - Maksim Lysyy (University of Bergen)
1.1
1.1
10:50 - 12:35
Contributions

10:50 Multicontinuum non-equilibrium theory for coupled flow and deformation in fractured rocks - Marco Dentz (IDAEA-CSIC)

11:05 Shear Displacement Predictions in Fractured Rock Based on Global vs. Resolved Stress - Giulia Conti

11:20 New algorithms for numerical simulation of multiple hydraulic fractures in low permeability rocks - Yuxiao Wang (University of Exeter)

11:35 Multiscale poromechanical model for naturally fractured coal seam reservoir considering non-linear fracture deformation and adsorption effects - Tien Dung Le (LEMTA, University of Lorraine)

11:50 Developing Methods to Assess Changes in Mechanical Properties of Shale Modified by Engineered Mineral Precipitation - Kayla Bedey (Montana State University)

12:05 A generalised phase-field model for fluid-driven dynamic fracture propagation in porous media - Kou Du (University of Cambridge)

12:20 Numerical simulation of hydroshearing in fractured crystalline rock at the Bedretto Underground Laboratory (Switzerland) - Iman Vaezi (Spanish National Research Council)
1.1
1.1
10:50 - 12:35
Contributions

10:50 Derivation of 2-Phase Darcy Equations from Pore Scale Energy Dynamics using Non-Equilibrium Thermodynamics - Steffen Berg (Shell Global Solutions International B.V.)

11:05 Homogenized Lattice Boltzmann Model for Simulating Multi-Phase Flows in Heterogeneous Porous Media - Martin Lautenschläger (German Aerospace Center (DLR))

11:20 A Thermodynamically Consistent Model for Compositional Multiphase Flows - Farid SMAI (BRGM)

11:35 NAPL dissolution and transport in porous media: Upscaling the Mass Exchange Coefficient - Anne-Julie Tinet (GeoRessources - Université de Lorraine)

11:50 Upscaled model for two-phase flow in porous media - Didier Lasseux (CNRS - Université de Bordeaux)

12:05 Pseudo-Thermodynamics of Immiscible Two-Phase Flow in Porous Media: Differential Geometry and Convenient Coordinates - Håkon Pedersen (NTNU)

12:20 Two-phase non-linear flow in Pore Network Model - Federico Lanza (NTNU, Université Paris Saclay)
1.1
1.1
10:50 - 12:35
Contributions

10:50 A Lubrication Model for Wettablity Characterization - Mojtaba Norouzisadeh (Institut des Sciences de la Terre d’Orléans, CNRS, Université d'Orléans)

11:05 Dispersion of a passive scalar around a confined bubble - Davide Picchi (Università degli Studi di Brescia)

11:20 Deep learning aided pore scale modelling - Mostaghimi Peyman

11:35 Thermodynamic properties of ganglia in heterogeneous porous media - Chuanxi Wang (Peking University)

11:50 Pore-scale simulation of hydrogen transport in porous media - Leila Hashemi (TU Delft)

12:05 Development of a thermodynamically-based pore-scale network model to simulate fluid intermittency during two-phase flow. - Ademola Adebimpe

12:20 Direct numerical simulations of turbulent flows over a water saturated porous medium: How two phase pore flow forms roughness at a permeable surface - Johannes Müller
1.1
1.1
10:50 - 12:35
Contributions

10:50 Adsorbed Layer Transport Dominates Thin Film Evaporation in Nano Scale Confinements - Ali Beskok (Southern Methodist University)

11:05 Bicontinuous Microemulsion in Porous Matrices - Margarethe Dahl (Technische Universität Berlin)

11:20 Fluid transfers in nanopores through dynamic NMR relaxometry - Benjamin Maillet (Navier laboratory)

11:35 Spontaneous and electrocapillary imbibition dynamics in nanoporous media - Bin Pan (University of Science and Technology Beijing)

11:50 Nanometer-scale wetting of micro- and meso-porous carbons: a time-resolved synchrotron small-angle scattering analysis - François Chaltin (Université de Liège)

12:05 Dynamical and thermodynamic aspects of evaporation of solutions from nanoporous media - joachim trosseille

12:20 Investigation of Catalyst Layer and Microporous Layer Liquid Water Saturation Level in Polymer Electrolyte Fuel Cell by Operando Small&Wide Angle X-ray Scattering - Kinanti Aliyah (Paul Scherrer Institut)
1.1
1.1
10:50 - 12:35
Contributions

10:50 Roles of Transport Mechanisms and Model Parameters in Gas Flow Migration across low-permeability porous media - Leonardo Sandoval (Politecnico di Milano)

11:05 Improved techniques for uncertainty quantification of foam flow in porous media - RODRIGO Weber dos SANTOS (Federal University of Juiz de Fora)

11:20 Dynamic Mode Decomposition for model reduction of flow and transport in porous media - Valentina Ciriello (University of Bologna)

11:35 Chemical and morphological uncertainty quantification by auto-weighted Bayesian Physics-Informed Neural Networks for reactive two-scale porous media at the pore scale - Sarah Perez

11:50 Prior ensemble based on geomechanical far-field approximations for data assimilation with ES-MDA in naturally fractured reservoirs - Michael Liem (Institute of Fluid Dynamics, ETH Zurich)

12:05 Techniques for the estimation of hydrogeological parameters in a cluster of infiltration ponds - Francesco M. Di Lena (Consiglio Nazionale delle Ricerche, Istituto di Ricerca Sulle Acque, Bari, Italy)

12:20 Multiphase Flow Effects on a Physics-Based Shale Reservoir Production Forecasting Model: A Global Sensitivity Analysis - Daniela Arias Ortiz
1.1
1.1
10:50 - 12:35
Contributions

10:50 Simulation Study of In-situ Conversion Process in Low-mid Maturity Shale Oil Reservoir - Zijie Wang (China University of Petroleum (East China))

11:05 Arctic bryophytic cover seen as a porous medium: coupled experimental and numerical thermal properties' assessment - Simon Cazaurang (Institut de Mécanique des Fluides de Toulouse)

11:20 On talik formation related to geological radioactive waste storage - Klaus-Peter Kröhn (GRS gGmbH)

11:35 Thermodiffusion and thermo-osmosis in porous media - Bjorn Hafskjold (Norwegian University of Science and Technology)

11:50 A novel local-minima 3D image segmentation method for fluid flow in low-resolution porous material images - Rui Li (University of Aberdeen)

12:05 Thermal properties of unconsolidated sediments and borehole back fill materials for ground source thermal energy systems - Zanne Korevaar (TNO Geological Survey of The Netherlands)

12:20 Monte Carlo method to solve the heat equation in a complex media - Simon Eibner (RASPODEE, Toulouse University, France)
1.1
1.1
10:50 - 12:35
Contributions

11:05 Noble metal coated high-aspect-ratio nanopore arrays and porous nanotube networks for catalysis in chemical synthesis and fuel cells - Wolfgang J. Ensinger (Technical University of Darmstadt)

11:20 Towards multiphase transport layers - Binary pore size distributions with hydrogen bubble assisted electrodeposition - Adrian Mularczyk (TU/e)

11:35 Removing size effect on 3D-printed material’s strength by controlling its microstructure - Xinrui Zhang (Delft University of Technology)

11:50 Interaction of bubble dynamics and manufactured porous electrodes in flow through membraneless water electrolysis - Daniel Niblett (Newcastle University)

12:05 Direct fabrication of porous 3D microstructures on silicon wafers for MEMS applications - Olaf Andersen (Fraunhofer IFAM Dresden)

12:20 Scan Line Patterning: An Efficient Approach to Achieve Periodic Open Cell Structures in Selective Laser Melting - Alexander Limper (Chemical Process Engineering AVT.CVT)
13:45 1.2
1.2
13:45 - 15:45
Room: Tinto
Contributions

13:45 Multiscale porous media approach to simulate shadowing and transpirative cooling effect of urban vegetation - Dominique Derome (Universite de Sherbrooke)

14:00 Non-invasive monitoring of subflorescent magnesium sulfate crust formation in porous media - Johan Alexander Huisman

14:15 Combining floods and droughts - Mitigation of the effects of climate change on the local water balance - Thomas Baumann (Technical University of Munich)

14:30 Functional Biochar for Contaminant Removal from Water - Haiyan Zhang

14:45 Characterization of evaporation induced aquifer-scale mixing and mineral precipitation - Marco Pieretti

15:00 A hydrogel-soil system to enhance plant water uptake - Pooria Ghadir (Department of Civil and Environmental Engineering, University of Strathclyde, Glasgow, United Kingdom)

15:15 The role of root hairs in root water uptake - Insights from an image-based 3D model - Patrick Duddek (ETH Zürich, Department of Environmental Systems Science, Physics of Soils and Terrestrial Ecosystems)

15:30 S table water isotopologue fra ctionation during soil water evaporation: Analysis using a coupled soil atmosphere model - Stefanie Kiemle
1.2
1.2
13:45 - 15:45
Contributions

13:45 Linkage between extended poroelasticity and micromechanics - Filip Adamus (University of Aberdeen; UCL)

14:00 A six (+1) field formulation for flow in porous media with fractures and barriers - Stefano Scialò (Politecnico di Torino)

14:15 Multipoint mixed FEM for rotation-based poroelasticity with faults - Alessio Fumagalli (Politecnico di Milano)

14:30 A discontinuous approximation for modeling multiphase flow and transport in complex porous media structures - Jumanah Al Kubaisy (Imperial College London)

14:45 A New Upscaling Strategy for Flow in Fractured Porous Media - Daniel Stalder (ETH Zurich, Switzerland)

15:00 Modeling Matrix-Fracture Fluid Leakage in Fractured Rocks Using Multi-Scale Darcy-Brinkman-Stokes Approach - Xiang Rao (King Abdullah University of Science and Technology)

15:15 Single-phase flow simulations in large-scale fractured porous media : solver challenges - Daniel ZEGARRA VASQUEZ (Inria Paris EPI SERENA)

15:30 Impact of artificial topological changes on flow and transport through fractured media due to mesh resolution - Aleksandra Pachalieva (Los Alamos National Laboratory)
1.2
1.2
13:45 - 15:45
Contributions

13:45 Pore-scale mass transfer model of capillary trapping dissolution based on Sherwood, Reynolds, and Schmidt number - Anindityo Patmonoaji (Tokyo University of Agriculture and Technology and Tokyo Institute of Technology)

14:00 Deformation-driven collapse of gas cavities in a soft porous medium - Chris MacMinn (University of Oxford)

14:15 Bubble Coarsening Kinetics in Porous Media - Ke Xu (Peking University)

14:30 Use of surfactants to enhance the CO2 storage capacity in the geologic carbon storage - Lee Joo Yong (Korea Institute of Geoscience and Mineral Resources)

14:45 Interfacial interaction of a porous periodic topology adjacent to a turbulent fluid flow by highly resolved PIV measurements - Tobias Fuhrmann (University of Stuttgart)

15:00 Singularities and surprises in porous media models of interfacial non-Newtonian flows - Prabir Daripa (Texas A&M University)

15:15 Impact of CO2 concentration in gas phase on foam behavior in carbonate rocks - Juliana Maria da Fonseca Façanha (Shell Bazil Technology)

15:30 The traveling wavefront for foam flow in multi-layer porous media - Grigori Chapiro (Universidade Federal de Juiz de Fora)
1.2
1.2
13:45 - 15:45
Contributions

13:45 A Geo-structurally Based Correction Factor for Apparent Dissolution Rates in Fractured Media - Jeffrey Hyman (Los Alamos National Laboratory)

14:00 Cooling of CO2-rich geothermal fluids: A mechanism for cave systems formation - Roi Roded (Civil and Environmental Engineering, Duke University, Durham, NC, USA)

14:15 Quantification of the impact of acidified brine on fracture-matrix transport in a naturally fractured shale using in situ imaging and modeling - Christopher Zahasky (University of Wisconsin-Madison)

14:30 Adaptive models for nonlinear flows in highly heterogeneous porous media - Francesco Patacchini (IFP Energies nouvelles)

14:45 Dispersion in porous media gravity currents experiencing drainage - Saeed Sheikhi (PhD student, University of Allberta)

15:00 Experimental and numerical investigation on convective mixing in porous media flows - Marco De Paoli (Physics of Fluids Group, University of Twente)

15:15 Three-Dimensional Imaging of Density-Driven Convection in Consolidated Rock Samples Using X-Ray CT Scanning - Anna-Maria Eckel

15:30 Rayleigh-Darcy convection in a three-dimensional granular medium: an experimental study - Shabina Ashraf (University of Rennes1)
1.2
1.2
13:45 - 15:45
Contributions

13:45 Residual bubbles’ local equilibrium after coarsening - Yuehongjiang Yu

14:00 Study on Convective Drying of Porous Media – Comparison of Phase Field Simulations with Micro-model Experiments - Lukas Maier (Institute of Chemical Process Engineering, University of Stuttgart)

14:15 Starting from the bottom: Coupling a genetic algorithm and a pore network model for porous electrode optimization - Maxime van der Heijden (Eindhoven University of Technology)

14:30 Image-based pore-scale simulations of nuclear magnetic resonance response for enhanced reservoir characterization - Pedro Vianna (Universidade Federal Fluminense)

14:45 Numerical modeling of evaporation-condensation in nanoporous media by SPH method - Nathan AMROFEL (Géoressources Laboratory - Université de Lorraine)

15:00 Turbulent transport across the sediment-water interface: Pore-resolved direct simulations and upscaled modeling - Sourabh Apte (Oregon State University)

15:15 Stochastic Methods for the Generation of Granular Porous Media with Conditional Heterogeneity - Thomas Seers (Texas A&M University at Qatar)

15:30 Gyroid structures with topology-optimised mechanical properties designed by simulations - Leonie Wallat
1.2
1.2
13:45 - 15:45
Contributions

13:45 Explicit Physics-Informed Neural Networks for Nonlinear Closure: The Case of Transport in Tissues - Brian Wood (Oregon State University)

14:00 3D Reconstruction of Porous materials using Deep Learning - Serveh Kamrava (Colorado School of Mines)

14:15 Physical residual neural networks for reduced order modelling of reactive flow in porous media - Ahmed H. Elsheikh (Heriot-Watt University)

14:30 Fast Physics Informed Surrogate Models for Fluid Flow in Porous Media: Learning Operators using DeepONets - Waleed Diab (Khalifa University)

14:45 Physics Informed Machine Learning Methods For Production Forecast - Roman Manasipov (Datagration Solutions Inc.)

15:00 Physics informed neural networks based on sequential training for CO$_2$ utilization and storage in subsurface reservoir - Kiarash Mansourpour (TU Delft)

15:15 Physics-informed machine learning application for heterogeneous permeability estimation in 3D sandbox experiments - Hongkyu Yoon (Sandia National Laboratories)
1.2
1.2
13:45 - 15:45
Contributions

13:45 Assessing the fate of PFAS in subsurface from experimental studies and numerical simulations at soil-column scale - Anastasios Melitsiotis (Foundation for Research and Technology Hellas - Institute of Chemical Engineering Sciences (FORTH/ICE-HT))

14:00 Modeling dehalogenation of diatrizoate by sulfide-modified nano-scale zero-valent iron in natural porous media. - Angeliki Koupa

14:15 EXAMINING THE FEASIBILITY OF USING ZERO-VALENT BIMETALS FOR THE TREATMENT OF TRICHLOROETHYLENE VAPORS IN THE UNSATURATED ZONE - Clarissa Settimi (University of Rome Tor Vergata)

14:30 Foam for Soil Remediation: Similarities and Differences with Foam for Hydrocarbon Recovery - Henri Bertin (I2M)

14:45 4D Study of Groundwater Remediation Techniques at Pore-scale - Pavel Kazakovtsev (Teesside University)

15:00 The effect of upscaling the reaction rate on predictive modeling in subsurface processes - Javad Shokri (University of Manchester)

15:15 On clean-up of iodinated X-ray contrast media agents from surface waters - Stefano Seccia (School of Engineering, University of Warwick)
1.2
1.2
13:45 - 15:45
Contributions

13:45 Inertial solution for high-pressure-difference pulse decay measurement through microporous media - Tian Zhiguo

14:00 The role of temporal and spatial fluctuations for scalar transport at the interface between a free turbulent flow and a porous medium - Simon v. Wenczowski (Technical University of Munich (TUM))

14:15 Dynamics of $A+B \to C$ chemical reaction fronts in finite radial geometry - Darío M. Escala (Université Libre de Bruxelles)

14:30 Understanding pre-Darcy flow and velocity-dependent permeability in porous rocks through neutron imaging - Fernando Vieira Lima (Lund University)

14:45 Non-linear flow phenomena in a porous cylindric microtube - Philippe Beltrame (Avignon Université)

15:00 Traveling wave solutions describing the foam flow in porous media for low surfactant concentration - Luis Fernando Lozano Guerrero (LAMAP- Universidade Federal de Juiz de Fora)

15:15 Effect of yield stress in a two phase pore network model - Andreas Hennig (NTNU and PoreLab)

15:30 Convection in Salt Lakes - Matthew Threadgold (University of Leeds)
16:15 Stability and functionality of immobilised liquid-liquid interfaces in periodic structured media - Shervin Bagheri (KTH)
Stability and functionality of immobilised liquid-liquid interfaces in periodic structured media ((MS24) Invited and Plenary Sessions)
- Shervin Bagheri (KTH)
16:15 - 16:45
In this talk, I will discuss how liquid-liquid interfaces can be stably locked into periodic structured porous substrates and used for controlling the transfer of momentum, heat and mass with an external flow. First, we address the behavior of liquid-liquid interfaces locked in textured surfaces and exposed to an external shear flow. When the liquid-liquid interface remains stable, these surfaces can enhance heat and mass exchange with a bulk flow and reduce flow drag and biofouling. We demonstrate how shear stresses and soluble surfactants modify the dynamics of the liquid-liquid interface, resulting in waves, drainage and Marangoni stresses, all of which significantly affect transport processes with the external flow. Second, we introduce systems with liquid-liquid interfaces locked in three-dimensional periodic porous scaffolds. By tuning the wettablity and introducing appropriate “fluid traps”, we can immobilize interfaces of different morphologies, including spherical droplets or diamond-shaped structures. These multi-phase materials are remarkably stable and provide a very high area-to-volume ratio. We will discuss their potential as flow-continuous heterogeneous catalysis and for other applications that require optimizing mass transfer across interfaces, such as CO2 capture.
The Rheology of Granular Media: from Engineering to Geological Applications - Raffaella Ocone (Heriot-Watt University)
The Rheology of Granular Media: from Engineering to Geological Applications ((MS24) Invited and Plenary Sessions)
- Raffaella Ocone (Heriot-Watt University)
16:15 - 16:45
Granular materials exhibit a broad range of intricate dynamic behaviours. The study of their hydrodynamics is extremely relevant in the chemical and process industries, where those materials are widely handled and produced. Understanding how internal (e.g., particles size and shape) and external (e.g., applied stresses, moisture content) physical properties impact on the flow behaviour of solid particles helps industrial practitioners handle and produce particulates in an efficient and less costly way. Building upon previous findings applied to the process industry, the talk explores the challenges associated with the dynamic behaviour of dry and wet granular material and discusses recent experimental and modelling efforts on the flowability of pyroclastic powders. Pyroclastic powders are investigated with the aim of predicting and managing the hazard resulting from volcaniclastic debris flows, natural phenomena which occur when a mixture of pyroclastic fallout/current deposits and water move down slopes under the action of gravity.
17:00 1.3
1.3
17:00 - 18:00
Contributions

17:00 Underground hydrogen storage and in-situ gas conversion: macroscopic investigation on reactive transport mechanisms - Gerald Stiedl (Montanuniversität Leoben)

17:15 Geochemical reactions of iron oxides with hydrogen in the porespace of sandstones: Processes, kinetics & limitations of the extent of reaction. - Christian Ostertag-Henning (Federal Institute for Geosciences and Natural Resources)

17:30 Impact of microbial activity on hydrogen transport in porous reservoirs across scales - Maartje Boon (TU Delft)

17:45 Pore-scale observations of hydrogen trapping and migration in porous rock - Yihuai Zhang (University of Glasgow)
1.3
1.3
17:00 - 18:00
Contributions

17:00 Visualising Two-Phase Flow in a Natural Geological Fracture Using Synchrotron Imaging - Andreas Busch (Heriot-Watt University)

17:15 Particle-laden fluid flow in fractures: particle transport, deposition and clogging - Ahmed Hafez (KAUST)

17:30 Elastic normal fracture deformation in thermoporomechanical media - Ivar Stefansson (University of Bergen)

17:45 The importance of understanding hydrothermal alteration in fault related geothermal systems in Cornwall - Nathaniel Forbes Inskip (Heriot-Watt)
1.3
1.3
17:00 - 18:00
Contributions

17:00 Life in a tight spot: How bacterial populations spread through porous media - Sujit Datta (Princeton University, USA)

17:15 Bacterial Accumulation near Residual Organic Pollutants in Micropockets of Porous Media Depends on Chemotaxis and Pore Water Velocity - Roseanne Ford

17:30 Using Branching Fungus to Remediate NAPLs Trapped in Hard-to-reach Areas in Fractured Porous Media - Sang Lee

17:45 In Situ Bioremediation of Selenium and Nitrate for Full Scale Treatment of Mine Waste in the Elk Valley, British Columbia - Brent Peyton (Center for Biofilm Engineering, Montana State University)
1.3
1.3
17:00 - 18:00
Contributions

17:00 Tortuosity-governed droplet transport in a microfluidic porous network - Elliot SPEIRS

17:15 A simplified pore-scale model for drainage including film flow effects - Paula Reis (University of Oslo)

17:30 Model of water drop infiltration in porous media with amphiphilic matter - Florian CAJOT (INRAE - UMR1114 EMMAH INRAE-AU - F84000 Avignon - FRANCE)

17:45 Capillary entry pressure in soft porous media - Callum Cuttle (University of Oxford)
1.3
1.3
17:00 - 18:00
Contributions

17:00 Modelling anomalous diffusion in semi-infinite disordered systems and porous media - Brian Berkowitz (Weizmann Institute of Science)

17:15 Advective trapping in the flow through composite heterogeneous porous media - Juan J. Hidalgo (IDAEA-CSIC)

17:30 Generating synthetic images of unsaturated porous media with a multiscale multipoint statistics approach to study transport in two-fluid-phase systems - Emma Ollivier-Triquet (IFPEN-FAST-CNRS)

17:45 Topological Control on Flow and Transport in Unsaturated Porous Media from Temporally Resolved 3D X-ray Computed Micro-tomography - Andrés Velásquez-Parra (Eawag - ETH Zurich)
1.3
1.3
17:00 - 18:00
Contributions

17:00 Analysis of capillary pumping during the drying of heterogeneous porous media using Lattice Boltzmann modelling - Jan Carmeliet (ETHZ)

17:15 Pore scale study of freeze-drying using a non-isothermal pore network model and X-ray tomography image data - Simson Julian Rodrigues

17:30 Upscaling the rheology of non-Newtonian fluid flow in porous medium – a pore-scale study - Amna Al-Qenae

17:45 Pore-scale Ostwald ripening of residually trapped CO2 in the presence of oil and water at immiscible and near-miscible conditions - Johan Olav Helland (NORCE Norwegian Research Centre)
1.3
1.3
17:00 - 18:00
Contributions

17:00 Introducing Barlow Twins deep operator networks as a proxy for geologic carbon storage - Teeratorn Kadeethum (Sandia National Laboratories)

17:15 Microscopic flow parameters prediction of shale oil based on deep learning - Lei Zhang

17:30 Simulating water flow and solute transport at unsaturated soils with unknown initial conditions using physics-informed neural networks trained with time-lapse geoelectrical measurements - Ziv Moreno (Agronomical Research Organization (ARO), the Volcani Center)
1.3
1.3
17:00 - 18:00
Contributions

17:00 Heat Extraction at High Flow Rates by Fracture Plugging in Geothermal Reservoirs from Pore to Darcy Scale Considering Local Thermal Non-Equilibrium (LTNE) Conditions - Yashar Tavakkoli Osgouei (Middle East Technical University)

17:15 Investigation on the impact of thermo-osmosis on fluid pressurisation in Boom clay – a case study of the ATLAS in-situ full-scale heating experiment. - Feliks Kiszkurno (UFZ (Helmholtz-Zentrum für Umweltforschung) & TU Bergakademie Freiberg)

17:30 Model Development for Thermal Management of Li-Ion Batteries from Cell Level to Total System Level - Mehmet Onur Doğan (Middle East Technical University)

17:45 Use of Controlled Fractures in Enhanced Geothermal Systems - Olufemi Olorode (Louisiana State University)
Tuesday 23 May 2023
08:40 Electroporation of cellular membranes for the enhancement of mass transfer in biological media: mechanism and technological applications - Eugene Vorobiev (Université de Technologie de Compiègne)
Electroporation of cellular membranes for the enhancement of mass transfer in biological media: mechanism and technological applications ((MS24) Invited and Plenary Sessions)
- Eugene Vorobiev (Université de Technologie de Compiègne)
08:40 - 09:20
Cellular membranes serve as selective barriers for regulation of molecular transport between interior and exterior of cells. Under the effect of electric field pulses of very short duration (from several hundred of nanoseconds to several milliseconds) with pulse amplitude from 100-300 V/cm to 100-300 kV/cm, the biological membrane is electrically pierced and loses its semi-permeability temporarily or permanently. The electrical permeabilization of biological membranes (called electroporation) may be reversible or irreversible. It was shown that electroporation can serve to introduce into cells or extract from cells small and/or large molecules. This phenomenon has been applied to amplify the insertion of nucleic acid molecules in genetic modifications, to enhance drug transport in cancer treatment or for the killing of microorganisms. Electroporation can also be used to enhance extraction of valuable cell compounds (polyphenols, carbohydrates, proteins,..) from biological media (plant tissue and biomass materials). Biological tissue with electroporated cell membranes, but with a preserved cell wall network, is selectively permeable. For the purpose of mass transport, electroporated cell tissue presents a porous network with improved permeability and diffusivity characteristics. This lecture presents the mechanisms of cell electroporation, its impact on the physical properties of biological media, and gives examples of mass transfer enhancement in electroporated cell network. Different methods to detect and quantify electroporation phenomena in porous network of biological tissue are presented. Impacts of electroporation on the mechanical, diffusional and electrophysical properties of biological media are illustrated by numerous examples. Physical models of liquid expression and compounds diffusion in compressible electroporated biological tissue are presented. Several innovative green technologies based on the pulsed electric energy induced electroporation are presented, including selective extraction, filtration, pressing, and drying of plant materials and biomass.
09:30 2.1
2.1
09:30 - 10:30
Contributions

09:30 On the conceptual role of permeability contrasts within sandstone utilised for underground hydrogen storage - Doug Smith (Heriot Watt University and British Geological Survey)

09:45 Salinity gradients and salt precipitation due to hydrogen injection in saline aquifers and reservoirs - Gulce Kalyoncu

10:00 Caprock sealing capacity for underground hydrogen storage; Kimmeridge Clay - Lubica Slabon (University of Edinburgh)

10:15 Impact of hydrogen trapping in underground porous formations on recovery efficiencies during interseasonal storage injection and withdrawal cycles - Katriona Edlmann (The University of Edinburgh)
2.1
2.1
09:30 - 10:30
Contributions

09:30 Bridging the gap between lab experiments and mixed-dimensional modeling for flow and transport in fractured media - Jakub Both (University of Bergen)

09:45 An REV-scale model for dissolution of porous rocks - Anthony Ladd (University of Florida)

10:00 Exploring the limits of semi-analytical matrix diffusion - Matthew Sweeney (Los Alamos National Laboratory)

10:15 About long time asymptotic solutions of non-linear counter current two-phase flow in rock matrix blocks - Benoit Noetinger (IFPEN)
2.1
2.1
09:30 - 10:30
Contributions

09:30 Meter-scale MICP improvement of medium graded very gravelly sands: lab measurement, transport modeling, mechanical and microstructural analysis - Guijie Sang (University of Strathclyde, Glasgow)

09:45 Systematic screening of microbial induced calcite precipitation kinetics via online monitoring - Frédéric Lapierre (Munich University of Applied Sciences HM)

10:00 Assessing the strength of biomineral strategies for concrete repairs. - Athanasios Karampourniotis (PhD student, Civil and Environmental Engineering, University of Strathclyde)

10:15 Influence of mineralogy on Sporosarcina pasteurii attachment in engineered and natural porous media - Eva Albalghiti (The University of Michigan)
2.1
2.1
09:30 - 10:30
Contributions

09:30 The Influence of Viscosity and Wettability on Immiscible Fluid Displacements in Porous Media - Harris Rabbani (Texas A&M University at Qatar)

09:45 The Effect of Porous Medium Wettability on the Relationship Between Capillary Pressure, Saturation, and Interfacial Area for Three-Phase Flow - Dorthe Wildenschild (Oregon State University)

10:00 Systematic study of wettability alteration of glass surfaces by dichlorooctamethyltetrasiloxane silanization; a guide for contact angle modification - Tomislav Vukovic
2.1
2.1
09:30 - 10:30
Contributions

09:30 Pore-scale investigations of two-phase flow on mineral reaction rate - Hang Deng (Peking University)

09:45 Exploring the Impact of Heterogeneity and Flow Rate on Mixing and Displacement of Miscible Phases in Porous Media - Yaniv Edery (Faculty of Civil and Environmental Engineering, Technion, Haifa, Israel )

10:00 Intermittent shifting of preferential flow paths in bioclogged porous media enhances mixing-driven reactions - Veronica Morales (University of California, Davis)

10:15 Dynamics of microplastic fiber mobility in a periodic porous media: Experimental results and numerical simulations - Nick Engdahl (Washington State University)
2.1
2.1
09:30 - 10:30
Contributions

09:30 Wettability effect on flow-driven deformation using hydro-mechanically coupled pore network model - Min-Kyung Jeon (Korea Institute of Geoscience and Mineral Resources)

09:45 Representation of Fully Three-Dimensional Interfacial Curvature in Pore-Network Models - Luke Giudici (Imperial College)

10:00 A numerical study of CO2-CH4 displacement in shale using Lattice Boltzmann method - Jian Wu (The University of Sydney)

10:15 Finding the Representative Elementary Volume with Hill-Mandel condition - Martin Lesueur (Delft University of Technology)
2.1
2.1
09:30 - 10:30
Contributions

09:30 Practical Tera-scale 3D Super Resolution Approaching a 1-micron Resolved 1-inch Core Plug - Ying Da Wang (UNSW)

09:45 Multiscale Rock Image Pore Structure Feature Identification, Quantification and Modelling using AI - Ciprian Panaitescu

10:00 Pseudo 3D unpaired domain transfer network for digital rock domain adaptation - Kunning Tang (University of New South Wales)

10:15 CNN model for multi-component digital rock modeling based on CT and QEMSCAN images - Xueqing Zhou
2.1
2.1
09:30 - 10:30
Contributions

09:30 Numerical Challenges in Numerical of Foam Displacements in Porous Media - William Rossen (Delft University of Technology)

09:45 A linearised closure approach for averaged inertial and compressible flows - Yanis Bendali

10:00 Immersion of porous aggregates: application to concrete recycled aggregates - Emmanuel Keita (Laboratoire Navier)

10:15 Measuring the changes in the pore size distribution of a soil sample during its compression using non-Newtonian fluids. - Martin Lanzendörfer (Charles University, Faculty of Science, Prague)
10:30 Poster Session I
Poster Session I
10:30 - 12:00
Contributions

10:30 Simulation Study on Heat Flow Coupled Heat Transfer in Porous Media - minhua Cheng (PetroChina Research Institute of Petroleum Exploration & Development，Beijing 100083，China；)

10:30 Adaptive node adjustment for real-time subsurface flow modeling - Shang-Ying Chen (National Cheng Kung University)

10:30 Stability assessment of foam enhanced by surfactant, polymer and nanoparticles in the presence of petroleum hydrocarbons - Adil Baigadilov (BRGM (French geological survey); Université Grenoble Alpes, CNRS, G-INP, LRP/IGE)

10:30 ASSESSMENT OF THE ACCURACY OF THE SOIL GAS RADON DEFICIT TECHNIQUE FOR MONITORING AND QUANTIFYING RESIDUAL LNAPL CONTAMINATION - Alessandra Cecconi (University of Rome Tor Vergata)

10:30 Inelastic deformation of porous sandstones and its influence on rock properties under cyclic triaxial loading conditions - Ming Wen ( Heriot-Watt University)

10:30 Investigating mass transfer relationships in stereolithography 3D printed electrodes for redox flow batteries - Maxime van der Heijden (Eindhoven University of Technology)

10:30 Expression of Eshelby tensor from fabric tensor - Young June Yoon (Hanyang University)

10:30 A Fourier-transform approach for fringe pattern analysis for a Mach-Zehnder interferometry measurement on surface evaporation of saturated porous media - Julian Härter (Universtity of Stuttgart)

10:30 Understanding the Reactive Transport and Retention Behavior of Engineered Virus-mimicking Nanostructures - Jai Kishan Rajak (Norwegian University of Science and Technology)

10:30 Novel laboratory apparatus for understanding microbiology in hydrogen storage in porous media - Simon Gregory (British Geological Survey)

10:30 Semantic segmentation of rock images from multiple imaging methods using deep learning methods - Hongkyu Yoon (Sandia National Laboratories)

10:30 Mechanistic studies on the adsorption of Iodinated Contrast Media agents on Activated Carbon - Ashfeen Ubaid Khan (Polytechnic University of Milan)

10:30 Transport in heterogeneously reactive media - Dario Maggiolo (Chalmers University of Technology)

10:30 PTFE-based pore-filled ion exchange membranes for electrodialysis and energy conversion processes - Jeong-Hoon Kim (Korea Research Institute of Chemical Technololgy)

10:30 An innovative method for the utilization of quarry sand - Dorina Strieth (RPTU Kaiserslautern-Landau)

10:30 DeepAngle: Deep-learning-based estimation of the contact angle distribution in tomography images of porous media - Arash Rabbani (The University of Leeds)

10:30 A visualization study of stress evolution in CBM horizontal well cavity completion - Xiaozhou Qin (China University of Petroleum (Beijing))

10:30 Effects of microplastics on temperature profiles inside porous media during evaporation - Nima Shokri (Institute of Geo-Hydroinformatics, Hamburg University of Technology)

10:30 Spatial moment analysis of single-species transport in unidirectional laboratory tracer tests using rock cores - Amarjot Singh Bhullar (Imperial College London)

10:30 Study on the Law of CO2 Miscible Displacement Under Different Injection Methods in Heterogeneous Reservoir - Xinliang Chen (University of Chinese Academy of Sciences)

10:30 Deep Learning-based inverse modeling of a tank model of a channelized aquifer - Vanessa A. Godoy (Universitat Politecnica de Valencia)

10:30 Electrokinetic in situ recovery of copper: The influence of mineral occurrence, zeta potential, and electric potential - Kunning Tang

10:30 Further Analysis of the Flow through Porous Bodies with Application to Stormwater Management - Ana Barcot (Fluid Mechanics, Luleå University of Technology)

10:30 Experimental Study on Stress Sensitivity Considering Different Fractures and Water Content in Shale Reservoir - Jin Chang (Research Institute of Petroleum Exploration & Development, PetroChina)

10:30 Investigation of reaction rates during microbiologically induced calcium carbonate precipitation - Niklas Erdmann (RPTU Kaiserslautern-Landau, Chair of Bioprocess Engineering)

10:30 Enhanced fluid-fluid chemical reaction kinetics under dynamic multiphase flow - Xueyi Zhang (Hohai University and Eawag)

10:30 CAN SINGLE POROSITY MODELS ADEQUATELY REPRESENT HEAT FLOW IN FRACTURED POROUS MEDIA? - David Egya (Heriot-Watt University)

10:30 Acceleration of Optimal Bayesian Experimental Design via Decision Trees Methods with Orthgonality Constraint - Grigorii Buklei (National Research University Higher School of Economics)

10:30 Colloid transport inside slow sand filters: A multi scale study - Mandana Samari-Kermani (Utrecht University)

10:30 Atomistic Insight into Trapped Oil Displacement by Nanofluids - YUANHAO CHANG (NTNU)

10:30 Wetting and Drying Dynamics in Hierarchically Porous Silicon: An In-Situ X-Ray Microscopy Study - Stella Gries (Institute for Materials and X-Ray Physics, Hamburg University of Technology, Hamburg, Germany — Deutsches Elektronen-Synchrotron DESY, Hamburg, Germany — Center for Hybrid Nanostructures CHyN, University of Hamburg, Hamburg, Germany)

10:30 Reactive transport modeling in aqueous environments using the Nernst–Planck formulation - Po-Wei Huang (ETH Zurich)

10:30 Enhancing a high-fidelity nonlinear solver with reduced order model for induced seismicity - Teeratorn Kadeethum (Sandia National Laboratories)

10:30 Inhibiting transport of radionuclides in porous media by combining in situ electrokinetics with colloidal silica grout - Rebecca Lunn (University of Strathclyde)

10:30 DoE-based history matching for probabilistic integrity analysis -- a case study of the FE-experiment at Mt. Terri - Jörg Buchwald (Helmholtz Centre for Environmental Research - UFZ)

10:30 Flow of a fluid with pressure-dependent viscosity through aging porous media - Shriram Srinivasan

10:30 Enhancing backfill thermal properties by combining granular phase change materials, graphite and glass - Tairu Chen

10:30 NMR relaxometry characterization of water adsorption in corn stover anatomical fractions - Matthew C. Young (Department of Chemical and Biological Engineering, Montana State University, Bozeman, MT 59717, USA)

10:30 NMR Study of water transfer from bio-based materials to the living plant - Rahima SIDI-BOULENOUAR

10:30 Sound and x-ray vision of a porous rock: micromechanics of shear failure under different loading protocols and implications for managing induced seismicity during subsurface operations - Alexis Cartwright-Taylor (Heriot-Watt University)

10:30 A Correlation for Dispersion Coefficient in Pipe Flows - Yang Liu

10:30 Permeability evolution of fractured sorptive porous materials - Yida Zhang (University of Colorado Boulder)

10:30 Modeling Structural Changes in a Fixed Bed Reactor for Thermochemical Heat Storage During Continuous Cycling - Torben Prill (Institute of Engineering Thermodynamics, German Aerospace Center (DLR))

10:30 Numerical simulation of hydraulic stimulation on geothermal reservoirs: injection optimization to manage induced seismicity and thermal decline - Sandro Andrés Martínez (Universidad Politécnica de Madrid)

10:30 Particle methods for the dynamics of porous biofilms with heterogeneous rheology and its interaction with human lung epithelium - Philippe Poncet (University Pau & Pays Adour, France)

10:30 Influence of phototrophic biofilms on nutrient availability in soil - Jonas Kollmen (RPTU Kaiserslautern-Landau, Chair of Bioprocess Engineering)

10:30 Quantitative characterization of pore structure and analysis of seepage characteristics of tight reservoir based on digital core and NMR - Meng Du
12:00 2.2
2.2
12:00 - 13:00
Contributions

12:00 The Impact of Capillary Heterogeneity on CO2 Plume Migration at the Endurance CCS Target Site in the UK – A Core To Field Scale Study - Nele Wenck (Imperial College London)

12:15 Experimental study of the sealing properties of cement plug during the early age - Elie Ngouamba (SINTEF)

12:30 Mineral Dissolution on Geological Carbon Storage in Carbonates: A Microcalorimetric Study - Jacquelin Cobos (Researcher)

12:45 On the modelling of Joule-Thomson Effects: Analytical and Numerical Formulations - Cintia Goncalves Machado (TNO)
2.2
2.2
12:00 - 13:00
Contributions

12:00 Intermediate-scale experimental study and modeling of effects of caprock fracturing on brine contamination of shallow aquifers during storage of CO2 in deep saline geologic formations - Tissa Illangasekare (Colorado School of Mines )

12:15 Multiscale modelling of CO2 storage in coal seams: an image-based modelling method - Yu Jing (The University of New South Wales)

12:30 Impact of matrix diffusion on heat transport through heterogeneous fractured aquifers - Silvia De Simone (Institute of Environmental Assessment and Water Research (IDAEA-CSIC, Spain))

12:45 A wave-mediated effective diffusion model for gas production from a semi-sealed system - Kangping Chen (Arizona State University)
2.2
2.2
12:00 - 13:00
Contributions

12:00 Rheology and Mobility Critical Exponent of Immiscible Two-Phase Flow in Porous Media with Dual-Wettability Grains - Hursanay Fyhn (NTNU)

12:15 Micromodel of a gas diffusion electrode tracks in-operando pore-scale wetting phenomena - Sebastian Brosch (Chemical Process Engineering AVT.CVT, RWTH Aachen University)

12:30 New insights into the mechanisms leading to the formation of localised pathways in water-saturated clayey geomaterials exposed to pressurised non-wetting fluid emulating supercritical CO2 - Craig Allsop (University of Strathclyde)

12:45 Characteristics of fluid-fluid displacement in model mixed-wet porous media - Benzhong Zhao (McMaster University)
2.2
2.2
12:00 - 13:00
Contributions

12:00 Dispersive transport dynamics in porous media emerge from local correlations - Lucas Goehring (Nottingham Trent University)

12:15 Quantification of Coupled Longitudinal and Transverse Dispersion in Porous Media - Lesley James (Memorial University of Newfoundland)

12:30 Computing Fick diffusion coefficients using equilibrium molecular dynamics for binary mixtures of hydrogen relevant for underground hydrogen storage - Thejas Hulikal Chakrapani (Technical University of Delft)

12:45 Surface Induced Anomalous Transport of Nanoparticle in 3D Printed Structurally Heterogeneous Soils: coupling experiments and stochastic models - Filippo Miele (University of California, Davis)
2.2
2.2
12:00 - 13:00
Contributions

12:00 Improved Amott Experiments Capture Dynamics of Spontaneous Imbibition into Mixed-Wet Carbonate-Rock with Non-Zero Initial Brine Saturation - Ksenia Kaprielova (King Abdullah University of Science and Technology)

12:15 Steady-state flow transitions in ordered porous media investigated using an artificial compressibility finite difference method - Tobias Forslund

12:30 Analysis of CO2 trapping potential by combining morphology-based digital rock simulations and pore-scale flooding experiments - Bianca Brandstätter

12:45 Geometrical analysis of the pore space through the A* algorithm: application to 3D micro-CT images - Filippo Panini (Politecnico di Torino)
2.2
2.2
12:00 - 13:00
Contributions

12:00 An Improved Pore-scale Rock-typing Method using Minkowski maps for the Sensitivity of Regional Support Size - Christoph Arns (UNSW)

12:15 Modeling time-dependent battery discharge rate using an autoregressive multiscale neural network - Agnese Marcato (Politecnico di Torino)

12:30 Imaging upscaling study for porosity and permeability characterization in carbonate rock using machine learning - Wen Pin Yong (PhD student)

12:45 Application of Machine Learning to Generate Multiphase Pore-Scale Images - Linqi Zhu
2.2
2.2
12:00 - 13:00
Contributions

12:00 TRANSPORT AND ENERGY CONVERSION IN NON-ISOTHERMAL BATTERY SYSTEMS. THE CASE OF THE LITHIUM BATTERY - Øystein Gullbrekken (Department of Materials Science and Engineering, Norwegian University of Science and Technology, NTNU, Trondheim)

12:15 Electro-diffusion through montmorillonite gels - Fatiha Bouchelaghem (Sorbonne Université)

12:30 Modeling quasi-steady-state phase change transport in polymer electrolyte membrane fuel cells: Effect of surface crack density - Pablo Angel Garcia-Salaberri (Universidad Carlos III de Madrid)

12:45 Revealing multi-component 4-D heterogeneity in electrochemical systems via simultaneous neutron and X-ray tomography - Pranay Shrestha (University of Toronto)
14:15 2.3
2.3
14:15 - 15:30
Contributions

14:15 Experimental investigation of CO2 dissolution in Ca2+ rich aquifer with precipitation reaction - Shuai Zheng (Peking University)

14:30 Management of salt precipitation for large-scale CO2 storage projects - Sarah Gasda (NORCE Energy)

14:45 Sensitivity Analysis of CO2 Mineralization Trapping during CO2 Sequestration - Ayomikun Bello (Skolkovo Institute of Science and Technoloy)

15:00 Gas trapping dynamics in heterogeneous sandstones imaged using synchrotron time-lapse tomography. - Catrin Harris (Student)

15:15 3D X-Ray Visualization of Rayleigh-Bénard Instability in a Porous Medium - Tetsuya Suekane (Department of Mechanical Engineering, Tokyo Institute of Technology)
2.3
2.3
14:15 - 15:30
Contributions

14:15 Physical models for fracture flow tests by 3D-scanning and -printing - Michael Kröhn (GRS gGmbH)

14:30 A 3D Integrated Model of Porous Media and Fractured Rock for Interpretation of Subsurface DNAPLs Migration - Taehoon Kim (Yonsei University)

14:45 Groundwater Model Development of a Fractured Crystalline Rock Site with Site-Specific Data - Stefano Normani (University of Waterloo)

15:00 Condensation of vapor in a cracked sandstone revealed by in-situ rapid neutron tomography - Arash NEMATI (Universite Grenoble Alpes)

15:15 Particle deposition and clogging over rough natural fractures with surface attachments - Bin Wang (China University of Petroleum - Beijing)
2.3
2.3
14:15 - 15:30
Contributions

14:15 Impact of the internal heterogeneity of biofilms on hydrodynamics and reactions in 3D porous media - Joaquin Jimenez-Martinez (Eawag and ETH Zurich)

14:30 Study of Biofilm Structure using Advanced Imaging Techniques and Extraction of Pore Network from Simulated Biofilms - Emad Aamer (Otto-von-Guericke University, Magdeburg/Germany)

14:45 In situ imaging of bacteria transport and attachment in geologic materials using positron emission tomography - Vy Le (University of Wisconsin-Madison)

15:00 Pore-scale modelling of Microbially Enhanced Carbon Mineralization - michele starnoni (Universitat Politecnica de Catalunya)

15:15 Biofilm growth in heterogeneous porous media: pore-scale modeling and anomalous transport analysis - Xueying Li
2.3
2.3
14:15 - 15:30
Contributions

14:15 Investigation of factors affecting the performance of surfactant and polymer floods in sandstone cores aided by X-ray CT imaging - Andrea Rovelli (Imperial College London)

14:30 ET-MIP: A coupled model approach to simulating the fate and transport of CO2 in overburden - Nicholas Ashmore (University of Edinburgh)

14:45 An Experimental Study of Drying in Porous Media Using Novel 2D Micromodels with Dual Porosity - Yaofa Li (Montana State University)

15:00 Simulation of CO2-Brine Primary Displacement in heterogeneous carbonate rocks - Omidreza Amrollahinasab

15:15 Characterisation of multiphase flow in heterogeneous rocks - Senyou An (University of Manchester, Imperial College London)
2.3
2.3
14:15 - 15:30
Contributions

14:15 Effect of radial advection on chemical fronts - Anne De Wit (ULB)

14:30 Pulsed Flow Injection Strategies for Enhancing Subsurface Mixing - James Minto (University of Strathclyde)

14:45 Mixing in Porous Media: Observations and Modeling of the Local Concentration PDF - Guillem Sole-Mari (Université de Rennes 1)

15:00 10 years of chaotic mixing in porous media - Joris Heyman (CNRS)

15:15 High Resolution Mixing and Reactions in a Porous Column - Diogo Bolster (University of Notre Dame)
2.3
2.3
14:15 - 15:30
Contributions

14:15 Investigating the Use of Electrical Capacitance Tomography to Image Rapid Transient Moisture Flow Through Cracks in Concrete - Laura Dalton (Duke University)

14:30 Development of a tridimensional characterization methodology for hierarchical materials: application to the nuclear effluent decontamination in fixed-bed processes. - Samuel VANNIER (CEA)

14:45 3D X-ray micro-velocimetry of unsteady multiphase flows in porous media - Tom Bultreys (Ghent University)

15:00 3D Pore Roughness Extraction Technique: From 1.0 (2D) to 2.0 (3D) - Yiteng Li (King Abdullah University of Science and Technology)

15:15 Zoom-tomography applied to diverse porous media research at the MOGNO beamline from Sirius synchrotron - Talita Rosas Ferreira (Brazilian Synchrotron Light Laboratory (LNLS), Brazilian Center for Research in Energy and Materials (CNPEM))
2.3
2.3
14:15 - 15:30
Contributions

14:15 Insights into pore-scale hydrate morphologies during formation and dissociation in microfluidic for CH4 hydrate exploitation - Qian Ouyang (Center for Energy Resource Engineering (CERE), Department of Chemical Engineering, Technical University of Denmark)

14:30 Nanofluidics: a window into pore-scale fundamentals of CO2 injection in shale - Junjie Zhong (China University of Petroleum (East China))

14:45 Experimental observation of microbial growth using a microfluidics approach - Christian Truitt Lüddeke (Clausthal University of Technology)

15:00 A lab on a chip concept for rationalizing hydro-geochemical processes at the pore scale - Jenna Poonoosamy

15:15 Measurement of surface charge at immiscible liquid-liquid interface using streaming-potential-on-microfluidics - Yunfan Huang
2.3
2.3
14:15 - 15:30
Contributions

14:15 Reflection and Transmission Coefficients at the Interface of Fluid-Saturated Porous Media - Fabien Borocin

14:30 AN EFFICIENT TIME DOMAIN IMAGE-BASED FINITE ELEMENT IMPLEMENTATION TO SIMULATE WAVE PROPAGATION IN POROUS MEDIA - Victor Wriedt Sapucaia

14:45 A domain decomposition strategy to compute effective electrical conductivity of large-scale 3-D digital rock images. - Rafael da Silva Vianna (Institute of Computing, Fluminense Federal University)

15:00 Young’s modulus evolution during sintering of ceramics with and without shrinkage - Willi Pabst (University of Chemistry and Technology, Prague)
15:40 How the Chemical Vapor Infiltration process can be optimized for the production of advanced composite and porous ceramics - Gerard Vignoles (Université de Bordeaux - LCTS)
How the Chemical Vapor Infiltration process can be optimized for the production of advanced composite and porous ceramics ((MS24) Invited and Plenary Sessions)
- Gerard Vignoles (Université de Bordeaux - LCTS)
15:40 - 16:10
Chemical Vapor Infiltration (CVI) is a high-quality and versatile process enabling the preparation of reinforced porous and architecture ceramics as well as Ceramic Matrix Composites (CMC), which are high-temperature materials for aerospace, energy management and industrial systems. Very strong market growth perspectives trigger renewed interest in this process. However, being expensive and/or somewhat difficult to control and optimize, it needs modelling actions at least to provide guidelines for industrial usage. This presentation will describe the process physico-chemistry and its modelling, which has to be multi-physics and multi-scale. The numerical tools range from simple analytical approximate formulae to detailed, image-based modelling of heat & mass transfer coupled to chemical reactions and featuring porous media with morphological evolution. Special attention is paid to (i) the relationship between fibrous media structure and transport properties, including rarefied gas transfer mode, (ii) the potential of using thermal gradients in order to optimise CVI and obtain a fast and efficient infiltration.
Magnetic Resonance Measurements of Fluids in Shale - Bruce Balcom (University of New Brunswick)
Magnetic Resonance Measurements of Fluids in Shale ((MS24) Invited and Plenary Sessions)
- Bruce Balcom (University of New Brunswick)
15:40 - 16:10
Shale formations are of increasing importance world-wide as petroleum reservoirs. Conventional core analysis measurements are ill suited to the analysis of shale samples since the pore fluids present are very difficult to extract due to the very small pore sizes. Magnetic Resonance (MR) permits non-invasive analysis of intact samples and is therefore an intuitively appealing method for shale analysis. The MR relaxation correlation measurement T1-T2 is now commonly employed for analysis of shale fluids. The T1-T2 measurement struggles to observe and quantify the fast decaying signal from pore fluids in shales. A new method, which we term T1-T2* captures the very short-lived fluid shale MR signal exceptionally well and provides well resolved discrimination and quantification of pore fluids, as well as the solid-like kerogen. In this lecture we will review MR relaxation time measurements of fluids in porous media, consider the broad category of MR relaxation correlation measurements ultimately leading to T1-T2* analysis of shales.
16:10 Poster Session II
Poster Session II
16:10 - 17:40
Contributions

16:10 Pore Scale Modeling of roots and soil interaction - Nadja Ray (Friedrich-Alexander Universität Erlangen-Nürnberg)

16:10 Mixed-dimensional models for simulation of reactive transport in fractured porous media - Shin Banshoya

16:10 Remediation of multilayer soils contaminated by heavy chlorinated solvents using biopolymer-surfactant mixtures - Amir Alamooti (University of Arts et Métiers, and BRGM)

16:10 Microfluidic study of hydrogen conversion by Archea in porous media. A pore-scale investigation of gas conversion and controlling parameters under dynamic conditions. - Patrick Jasek

16:10 A combined experimental and modeling study to evaluate the soil-gas monitoring for early detection of contaminants leakage into groundwater - Dorian Davarzani (BRGM (French geological survey))

16:10 Relationship between groundwater microtemperature and electrical potential of the vegetation - Maria Pinheiro (University of Goettingen)

16:10 Simultaneous Interpretation Of Multiphase Fluid Flow Characteristics In Porous Media from Steady State SCAL Experiments Performed in a Microfluidic Approach - Bettina Jenei (Clausthal University of Technology)

16:10 Laboratory scale demonstration of asbestos mobility in sandy aquifer systems - Leonardo Magherini (Politecnico di Torino)

16:10 Predicting the heat depletion characteristics of hydrothermal doublet systems under varying reservoir and operational conditions - C. Justin Ezekiel

16:10 Laboratory measurements of fluid pressure diffusion in a fractured carbonate sample - Samuel Chapman (Ecole Normale Supérieure / CNRS UMR 8538)

16:10 The Uncertainty of Unsteady-State Relative Permeability Measurement Protocols - Steffen Berg (Shell Global Solutions International B.V.)

16:10 Gas trapping mechanism and the potential impact on productivity of geothermal reservoirs - Mathias Nehler (Fraunhofer IEG)

16:10 Quantifying the Partial Reversibility of Dispersion in Push-Pull Experiments by Means of Second Central Spatial Moments - Marie-Madeleine Stettler (University of Tübingen)

16:10 Water-Oil Relative Permeability determination in 2D micromodels of vugular porous media - Jorge Avendaño (Pontifical Catholic University of Rio de Janeiro PUC-Rio)

16:10 Modeling Solute Transport in Heterogeneous Media with Uncertain Architecture via Physics Informed Neural Networks - Milad Panahi (Politecnico di Milano)

16:10 Pore-scale imaging of nonlinear multiphase flow in porous media - Yihuai Zhang

16:10 Non-Newtonian fluids based method for characterizing the pore structure of spherical glass bead particles - Soheil Safari Anarkouli (Charles University, Prague)

16:10 PE-based pore-filled ion exchange membranes for electrodialysis and energy conversion processes - Jeong-Hoon Kim (Korea Research Institute of Chemical Technololgy)

16:10 Functional design of porous systems by systematic patterning of flat knits - Leon Pauly

16:10 Polymer Thermal Degradation: Numerical Simulation and Upscaling for Field Scale Reservoir Applications - Abdulaziz Alsaleh

16:10 Mechanisms of Solute Mixing in Darcy’s scale Heterogeneous Formations - Marco Dentz (Institute of Environmental Assessment and Water Research, IDAEA-CSIC)

16:10 An Upscaled Modeling Framework for Reactive Transport: A Case Study - Dry Creek, Idaho - Zachary Sherman (Virginia Tech)

16:10 The Nature of Multiphase Flow in Microfluidic Devices - William Rossen (Delft University of Technology)

16:10 Flow, heat, and transport at the scale of grains and pores in porous building materials - Hannah Menke (Heriot-Watt University)

16:10 Development of a micromodel design algorithm for heterogeneous reservoir rocks - Sebastian Hogeweg (Clausthal University of Technology)

16:10 Characterisation of porous biochar using X-ray micro-CT and FTIR techniques - Pavel Kazakovtsev (Teesside University)

16:10 Soil texture linking saltwater intrusion in coastal regions to surface soil salinity - Nima Shokri (Institute of Geo-Hydroinformatics, Hamburg University of Technology, Hamburg, Germany )

16:10 Microbially Induced Calcite Precipitation Treatment of Naturally Fractured Concrete: From Micro-Scale Characteristics to Macro-Scale Behaviour. - Gloria Castro (Postdoctoral researcher, Civil and Environmental Engineering, University of Strathclyde)

16:10 Wind erosion suppression using biological methods revisited: The use of microbial/enzymatic-induced carbonate precipitation and biopolymers - Jafar Qajar (Department of Petroleum Engineering, School of Chemical and Petroleum Engineering, Shiraz University, Shiraz, Iran)

16:10 Bacteria and surfactants for bio-cemented foams - Margaux Ceccaldi (Université Gustave Eiffel, Ecole des Ponts, CNRS, Navier)

16:10 Rayleigh-Bénard instability in heterogeneous porous media - Rima Benhammadi (IDAEA-CSIC)

16:10 Impact of Relative Permeability Hysteresis in Numerical Simulations of Underground Hydrogen Storage in Porous Formations - Guillermo Giacomi (UPM)

16:10 Fracture matrix pore network model (FM-PNM): an efficient pore scale modelling method of fluid flow in fractured porous media - Chenhui Wang (Research institute of petroleum exploration and development)

16:10 Investigation of species transport in fractured porous media using 3D-printed micromodels - Julien Maes (Heriot-Watt University)

16:10 Hybrid Mathematical Modelling and Uncertainty Quantification of Underground Hydrogen Storage - Peter Castellucci (University of Manchester)

16:10 Delineating external stressor signals as time-variant conditions affecting DNAPL source zone formation - Christian Engelmann (TU Bergakademie Freiberg, Chair of Hydrogeology and Hydrochemistry)

16:10 Digital concrete physics: Prediction of the effective elastic material properties of concrete by pressure-dependent high-resolution X-ray Computed Tomography - Martin Balcewicz (Bochum University of Applied Sciences)

16:10 Synthesis of granular activated carbon from biomass and correlation of its sorption properties with the pore space characteristics - Anastasia Stavrinou (Foundation for Research and Technology Hellas, Institute of Chemical Engineering Sciences)

16:10 The negative and positive effects of hot water injection into coal seam on CBM production - Dong Zhou (Taiyuan University of Technology)

16:10 Heat transfer through pore space in packed beds of non-spherical particles - Simson Julian Rodrigues (Otto von Guericke University Magdeburg)

16:10 Freezing and Thawing Process in Porous Media: A Study Using Magnetic Resonance Imaging and Modeling - Michal Snehota (Czech Technical University in Prague, Civil Engineering)

16:10 Influence of Pyrolysis Residence Time on The Physicochemical Properties of Algal Biochar for Water Treatment - Esther Odiki (Teesside University)

16:10 Pore-scale simulation of mucilage drainage using phase field method. - Omid Esmaeelipoor Jahromi (Forschungszentrum Jülich)

16:10 Understanding Pore Connectivity in Hard-Templated Carbon Materials - Nicola Michel Seraphim

16:10 Advanced characterization of novel multilayer cellulose based material for food packaging - NELLY PADILLA BELLO
Wednesday 24 May 2023
08:40 Vascular Design: Freedom, Evolution, Hierarchy - Adrian Bejan (Duke University)
Vascular Design: Freedom, Evolution, Hierarchy ((MS24) Invited and Plenary Sessions)
- Adrian Bejan (Duke University)
08:40 - 09:20
Porous materials are usually thought of as amorphous mixtures of two or more things, solids, fluids, and voids. The research field started that way, and so did my own activity in it. Along the way, I was drawn to the part of nature (the physics) that was missing from the amorphous view: the structure, flow, configuration, drawing (design), purpose, and evolution. The lecture is pictorial. It begins with defining the terms, because words have meaning: vascular, design, evolution, and prediction (theory). Next, vascular (tree shaped) architectures flow more easily than parallel channels with only one length scale (the wall to wall spacing). Transport across channels is facilitated when the spacing is such that the channel flow length matches the entrance (developing) length of the flow. The tendency to evolve with freedom toward flow configurations that provide greater access is universal in nature, bio, and non-bio. This tendency is the Constructal Law, which empowers us to predict the evolution toward flow access, miniaturization, high density of heat transfer, and the scaling up (or down) of an existing design. Vascular designs are icons of the design feature called hierarchy. Vasculatures occur naturally because they flow more easily than one-size designs. The movements in society are hierarchical, from city traffic to global air traffic, fuel consumption, and wealth. The future of evolutionary design everywhere points toward vascular, hierarchical flow architectures that will continue to morph with freedom and directionality. To read more: HEAT TRANSFER: Evolution, Design, and Performance, Wiley 2022. FREEDOM AND EVOLUTION: Hierarchy in Nature, Society and Science, Springer 2020. CONVECTION HEAT TRANSFER, 4th ed, Wiley, 2013.
09:30 3.1
3.1
09:30 - 10:30
Contributions

09:30 Understanding the impact of carbon mineralisation on the flow properties of basalts - Eleni Stavropoulou (EPFL)

09:45 Insights into safe CO2 injection and storage scenarios in tight chalk reservoir samples - Karen Feilberg (DTU Offshore)

10:00 Effects of Thermal Shocks on Cement for CCS under Confined and Unconfined Conditions - Kai Li (Delft University of Technology)

10:15 Injectivity losses in sandstones during CO2 hydrates formation - Matthieu Mascle (IFP Energies Nouvelles)
3.1
3.1
09:30 - 10:30
Contributions

09:30 Recent insights on the coupled processes and potential applications of microbially induced desaturation and precipitation by nitrate-reducing bacteria - Leon van Paassen (Arizona State University)

09:45 Engineered soil-mycelia systems for slope stabilisation - Grainne El Mountassir (University of Strathclyde)

10:00 Microfluidic and numerical investigation of anisotropic permeability alteration during biomineralization in porous media - Felix Weinhardt (Institute of Applied Mechanics, University of Stuttgart)

10:15 Using Low-Field Nuclear Magnetic Resonance and Computed Tomography Imaging to Explore Potential of Ureolysis-Induced Calcium Carbonate Precipitation Treatment to Seal Fractures in Shale - Matthew R. Willett (Montana State University)
3.1
3.1
09:30 - 10:30
Contributions

09:30 Experimental investigation of two-phase flow with a table-top optical scanner: the competition between viscous and gravitational effects under different boundary conditions - Marcel Moura (PoreLab - University of Oslo)

09:45 Transport of hydrophobic nanoparticles in partially saturated porous media: Attachment at fluid interfaces - Youssra Rahham (University of Waterloo)

10:00 Drainage pore-invasion patterns in porous media: role of interfacial dynamics - Sophie Roman (Université d'Orléans, France)
3.1
3.1
09:30 - 10:30
Contributions

09:30 Effect of evaporating surface to volume ratio on crystallization dynamics and damage caused by NaCl crystallization in porous media - Rozeline Wijnhorst (Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam)

09:45 Sorption in heterogenous porous media: a numerical study of the effects of spatial heterogeneity of pore structure - Mohaddeseh Mousavi Nezhad (Associate Professor)

10:00 Chaotic mixing due to oscillatory flow in porous media - Gaute Linga (University of Oslo)

10:15 How probabilistic nucleation controls spatiotemporal dynamics and dimensionality of mineral growth in porous media? - Mohammad Nooraiepour (University of Oslo, Norway)
3.1
3.1
09:30 - 10:30
Contributions

09:30 Investigation of Nanogel Transport in Porous Media by Microfluidic Models - Baojun Bai (Missouri University of Science and Technology)

09:45 Colloidal transport and clogging of a rock-like porous medium: effects of concentration, hydrodynamic stresses and geometry on particle deposition. - Anne-Sophie Esneu (IFP Energies Nouvelles)

10:00 Pore-scale visualization of emulsion flow in linear and radial microfluidic porous media - Clarice de Amorim (PUC-Rio)

10:15 Experimental study of drying in the presence of fluorescent particles in a model porous medium - Elisa Ghiringhelli
3.1
3.1
09:30 - 10:30
Contributions

09:30 Photoporomechanics: Visualizing and quantifying the evolving effective stress in 3D fluid-filled granular media - Ruben Juanes (MIT)

09:45 Scaled Physical Modeling of CO2 Cyclic Injection Process in A Heterogeneous Unconsolidated Sandstone Formation using Additive Manufacturing and Geotechnical Centrifuge Technologies - Daniel Cartagena-Pérez (University of Alberta)

10:00 A novel CPR/block preconditioning framework for two-phase flow simulations in porous media by mixed hybrid finite elements - Massimiliano Ferronato (University of Padova)

10:15 The role of pore fluids in supershear earthquake ruptures - Luis Cueto-Felgueroso (Universidad Politecnica de Madrid)
3.1
3.1
09:30 - 10:30
Contributions

09:30 Quantifying pore surface roughness of sedimentary rocks based on SEM images using artificial intelligence techniques - Jafar Qajar (Department of Petroleum Engineering, Shiraz University, Shiraz, Iran)

09:45 Optimization of the CO2 injection location in heterogeneous siliciclastic reservoirs using graph theory - Achyut Mishra (The University of Melbourne)

10:00 Physics-Informed Deep Learning for Reactive Transport of Volatiles in Cellulose-based Porous Media - Alexandra Serebrennikova (Intitute of Solid State Physics, TU Graz)

10:15 Accelerating continental-scale groundwater simulation with a fusion of machine learning, integrated hydrologic models and community platforms - Reed Maxwell (Princeton University)
3.1
3.1
09:30 - 10:30
Contributions

09:30 Diffusion properties of the gas diffusion layer from three dimensional digital images of the fibrous substrate and the microporous layer - Mohamed El Moustafa AHMED MALOUM (1 Institut de Mécanique des Fluides de Toulouse (IMFT))

09:45 MOF sensors for contaminant capture and detection: cooperative computational-experimental screening approach - Paul Iacomi (Surface Measurement Systems)

10:00 An Efficient Method to Compute Capillary Pressure Functions and Relative Permeability Curves in Dual Porosity Systems Arising in LCM Processes - Dominik Becker (Fraunhofer ITWM, Technische Universität Kaiserslautern)

10:15 Generating multi-modal pore size distributions for low-density micro-porous carbons using virtual void method in quenched molecular dynamics simulations - Edo Boek (Queen Mary University of London)
10:30 Poster Session III
Poster Session III
10:30 - 12:00
Contributions

10:30 Quantifying shrinkage of natural clay samples with an automated high-frequency measurement set-up - Bente Lexmond (Physical Geography - Utrecht University, the Netherlands)

10:30 A Macroscopic Model for Unsaturated Flow in Deformable Evolving Porous Media - Matteo Icardi (University of Nottingham)

10:30 A method to measure adsorptive-poroelastic properties for nanoporous adsorbents - D. Nicolas Espinoza (The University of Texas at Austin)

10:30 Fast workflow to estimate petrophysical properties: From Digital Rock Physics Scale to Laboratory Scale - Marco Miarelli (ENI S.p.A.)

10:30 Modeling Subsurface Hydrogen Storage With Transport Properties From Entropy Scaling Using the PC-SAFT Equations of State - Rainer Helmig (University of Stuttgart)

10:30 Quantifying the Influence of Groundwater Flow on Bacterial Chemotaxis near a NAPL Contaminant Source at the Pore Scale - Roseanne Ford

10:30 Quick Clay: A novel alternative for well decommissioning - Lucas Hand

10:30 Drag Reducing Agents for Geothermal Applications - Sian Jones (TU Delft)

10:30 Numerical design of nano-porous carbon binder domain (CBD) phase in lithium-ion battery electrodes - Ruihuan Ge

10:30 Predictions for the porosity dependence of elastic properties and ultrasound wave velocities in isotropic porous media - Willi Pabst (University of Chemistry and Technology, Prague)

10:30 Hydraulic attributes of heterogeneous pore spaces - Wenqiao Jiao (University of Lausanne)

10:30 A color-gradient lattice Boltzmann model for fluid flow with high density and viscosity ratios - Reza Haghani-Hassan-Abadi (NTNU: Norwegian University of Science and Technology)

10:30 Effect of CO2 dissolution on elastic instabilities of the polymer through porous media - Mohsen Mirzaie Yegane ((1) Department of Geosciences and Engineering, Delft University of Technology, (2) Dutch Polymer Institute (DPI))

10:30 Hallmarks of chaotic mixing in two dimensional unsteady porous media flow - Kevin Pierce

10:30 Controlling colloid transport through porous media via local gradients of solute concentration - Mamta Jotkar (Institute of Environmental Assessment and Water Research, Spanish National Research Council, Barcelona (CSIC-IDAEA), Spain)

10:30 A hybrid MPM-CFD model for simulating multiphase flow in deformable porous media. - Quoc Anh Tran (NTNU)

10:30 Interfacial instability on dewetting in a capillary tube: from gradient to complex geometry - Si Suo (KTH)

10:30 Bacterial chemotaxis in heterogeneous porous media in the presence of nutrient hot spots and flow - Maximilian F. Stoll (Eawag, ETH Zürich)

10:30 Aging of liquid foam confined in porous media - Ali Salamé (Laboratoire Navier, Univ Gustave Eiffel, Ecole des Ponts, CNRS)

10:30 Intracellular "in silico microscopes" - fully 3D spatial Hepatitis C virus replication model simulations - Markus Knodel (Simulation in Technology TechSim)

10:30 Waste Rock and Bentonite Mixtures for Gas Management within Low Heat Generating Waste Geological Disposal Facilities - Elise Mouat (The University of Edinburgh)

10:30 The effects of a variable interface permeability on a one-domain VANS model - Bruno Dias (Oak Ridge Associated Universities at NASA Ames Research Center)

10:30 GPSFLOW: A Novel Simulator for Modelling Underground Hydrogen and Gas Mixture Storage in Rough Reservoir - Zuansi Cai (Edinburgh Napier University)

10:30 Modeling Two Phase Flow in Fractured Rocks Considering Hydromechanical Behaviour and Fluid Leakage - Zhen Zhang

10:30 GeoChemFoam, the open-source pore-scale modelling toolbox - Julien Maes (Heriot-Watt University)

10:30 Predictive Digital Rock Physics simulation applied on a Sandstone Reservoir - Mohamed Regaieg (TotalEnergies OneTech)

10:30 Simulation of CO2 Injection and Development of Proxy Models for Svelvik CO2 Field Lab - Ashkan Jahanbani Ghahfarokhi

10:30 Applying Thermodynamic Framework to Analyze Transport Self-Organization Due to Dissolution/Precipitation Reaction in Porous Medium at Varying Peclet Number: Entropy, Enthalpy, Heterogeneity - yaniv edery (Technion)

10:30 Solute transport in partially saturated porous media with spatially correlated disorder - Ali Saeibehrouzi (University of Warwick & Coventry University)

10:30 An experimentally validated conceptual model for numerical simulation of accelerated dissolution trapping of CO2 in low-permeable fractured reservoirs - Ali Akbar Eftekhari (Technical University of Denmark)

10:30 Effects of time-dependent velocity fields on the dynamics of chemical transport in porous media - Dan Elhanati (Weizmann Institute of Science)

10:30 Performance characterization of oil-based drilling-mud contaminated cement as a barrier material - Elie Ngouamba (SINTEF)

10:30 Diagenetic Quantification in Relation to Pore Size Population Using Digital Rock Technology - NUR SHUHADAH BINTI JAPPERI (UNIVERSITY OF ABERDEEN, UNIVERSITI TEKNOLOGI MARA)

10:30 Sparsified coarse-scale operators for multiscale methods - Omar Chaabi (Khalifa University)

10:30 Gradient hydrogel based on self-filtration - Hugues Bodiguel (LRP, CNRS, UGA)

10:30 Biomineralisation of Calcium Carbonate via Ureolytically Active Fungi - Jason Eriksen (University of Strathclyde)

10:30 Characterising the development of fungal networks in complex porous media - Qi Zhang (University of Strathclyde)

10:30 Experiment and simulation of quasistatic fluid invasion resulting in pressure-saturation (p-s) hysteresis - Animesh Nepal (Institute of Environmental Assessment and Water Research (IDAEA-CSIC))

10:30 Characterization shale’s pore structure of shale: Multi-experimental imaging technique with machine learning - Hai Sun (China University of Petroleum (East China))

10:30 Evaluation of phase and inter-phase fractal dimensions during two-phase primary drainage in a microfluidic cell - Nikolaos Karadimitriou (Institute of Mechanics (CE), Stuttgart University)

10:30 Impact of Relative Permeability Hysteresis on Underground Hydrogen Storage - Diya Sunil Kumbhat (Research Associate, Helmut Schmidt University, Hamburg)

10:30 Effect of Phase Change in Gas Diffusion Layer on Performance of a PEM Fuel Cell – a modelling study - Grace Aquah

10:30 Montoring the reversible low-to-high-quartz transition and irreversible elastic property changes in sandstone via temperature-dependent impulse excitation - Eva Gregorová (University of Chemistry and Technology, Prague)

10:30 Towards a clinically relevant porous media model for vertebroplasty - Zubin Trivedi

10:30 Thermoregulation and Ventilation in Termite Nests: Towards Bio-Inspired Solutions to Design Energy Efficient Buildings - Nengi Fiona Karibi-Botoye (Heriot-Watt University)

10:30 Investigation of supercritical CO2 mass transfer in porous media using X-ray micro-computed tomography - Anna Herring (The Australian National University)

10:30 The impact of multi-scale geological heterogeneities on geothermal reservoir performance - Sebastian Geiger

10:30 Pore-scale Modelling of Salt and Hydrate Formation During CO2 Injection - Saleh Mohammadrezaei

10:30 Perturbation Theory and Green’s Function to Solve the Non-Linear Dispersion Saturation Equation arising in Cyclic Injection-Production Well Tests - Cintia Goncalves Machado (TNO)

10:30 Microscopic production characteristics and influencing factors of micro-nano pores in shale oil enhanced oil recovery by air injection - Meng Du
12:00 3.2
3.2
12:00 - 13:00
Contributions

12:00 Experimental measurements on caprock CO<sub>2</sub>-water wettability at reservoir pressure and temperature - D. Nicolas Espinoza (The University of Texas at Austin)

12:15 Insights into sandstone wettability alteration during cyclic scCO$_2$-brine injections - Anna Herring (University of Tennessee)

12:30 The effect of mixed convection and hydrodynamic dispersion on CO2 dissolution in saline aquifers - Ravid Rosenzweig (GSI)

12:45 A robust and efficient deep-learning-based surrogate model for CO2 storage in deep saline aquifers - Mengjie Zhao (TU Delft)
3.2
3.2
12:00 - 13:00
Contributions

12:00 Poromechanics of a yeast aggregate placed under fluid constraints - Térence Desclaux (Institut de Mécanique des Fluides de Toulouse / Laboratoire d'Analyse et d'Architecture des Systèmes)

12:15 A multiscale theory explaining the initial shrinkage of microporous materials upon adsorption - Yida Zhang (University of Colorado Boulder)

12:30 Coupled numerical modeling of the China Mock-Up experiment for swelling clay barriers - Aqeel Afzal Chaudhry (Technische Universität Bergakademie Freiberg, Germany)

12:45 A fully coupled hydro-mechanical modelling for describing gas transport in coal matrix - Fabrice GOLFIER (Université de Lorraine - GeoRessources Laboratory)
3.2
3.2
12:00 - 13:00
Contributions

12:00 A molecular simulation study for interfacial tensions, solubilities, and transport properties of the H2/H2O/NaCl system relevant for Underground Hydrogen Storage - Willemijn van Rooijen (TU Delft)

12:15 Multiphase relaxation processes at the µm-to-cm scale during storage of gases in rocks - Sharon Ellman (Ghent University)

12:30 Surface relaxivity and its role in permeability prediction - Ricardo Leiderman (Universidade Federal Fluminense)

12:45 Irreversible processes, inertial effects, and collective filling in geometries of increasing complexity - Ivan Lunati (Empa)
3.2
3.2
12:00 - 13:00
Contributions

12:00 Resonance, Rayleigh Flows and Thermal Choking: Convective Electromagnetic Energy Harnessing from Absorbing Porous Media. - Burt Tilley (Worcester Polytechnic Institute)

12:15 Modeling plant water deficit by Richards’ equation with a non-local root water uptake term - Marco Berardi (Consiglio Nazionale delle Ricerche - Istituto di Ricerca sulle Acque)

12:30 Chemo-Hydro-Mechanical variational phase-field fracture model in cementitious systems - Mostafa Mollaali (Helmholtz Centre for Environmental Research–UFZ, Leipzig, Germany)

12:45 Upscaling and Automation: New Opportunities for Multiscale Systems Modeling - Ilenia Battiato (Stanford University)
3.2
3.2
12:00 - 13:00
Contributions

12:00 Impact of nanoparticles and gas composition on bubble density and coarsening rate of confined CO2-foam under high-pressure high-temperature conditions - Aurora Pérez-Gramatges (Pontifical Catholic University of Rio de Janeiro)

12:15 Capillary-controlled phase transitions in caprock over CO2 storage in aquifer simulated by nanofluidic pore models - Armin Mozhdehei (Institut des Sciences de la Terre d’Orléans - UMR 7327 Université d’Orléans, CNRS, BRGM - 45071 Orléans Cedex, France)

12:30 Microscopic transport and phase behaviors of CO2 injection in heterogeneous formations using microfluidics - Yaohao Guo (East China University of Science and Technology; University of Toronto)

12:45 Brine drying and salt precipitation in porous media: microfluidics quantification of pore heterogeneity and wettability impact - Hui Zhang (School of Civil Engineering, University College Dublin, Dublin, Ireland)
3.2
3.2
12:00 - 13:00
Contributions

12:00 Machine Learning for the Characterization of Fibrous Gas Diffusion Layers for Polymer Electrolyte Fuel Cells - Dieter Froning (Forschungszentrum Jülich GmbH, Germany)

12:30 Prediction of CO2 adsorption potential on coal using various machine learning techniques for CCUS application in coal formation - Amer Alanazi

12:45 Dynamic Mode Decomposition to reconstruct and extrapolate hydrological time series - Giulia Libero (University of Bologna)
3.2
3.2
12:00 - 13:00
Contributions

12:00 Impact of large periodic deformations on solute transport in soft porous media - Matilde Fiori (University of Oxford)

12:15 Blood-flow simulations in three-dimensional aneurysms using LBM: From risk-assessment to follow-up treatment decisions - Stephan B. Lunowa (Technical University of Munich; TUM School of Computation, Information and Technology; Chair for Numerical Mathematics)

12:30 A volume-averaged model for acoustic streaming induced by focused ultrasound in soft porous media - Sebastian Price (PoreLab and Department of Chemistry, The Norwegian University of Science and Technology (NTNU))

12:45 Data-integrated tracer transport simulations in brain tissue: vascular networks, perivascular spaces, extra-vascular tissue - Timo Koch (University of Oslo)
14:15 3.3
3.3
14:15 - 15:30
Contributions

14:15 CT visualization of the CO2 degassing process in porous media - Chris Boeije (Delft University of Technology)

14:30 A micro-scale study of CO2 mobility control characteristics of a green foam in porous media - Tongke Zhou (Department of chemical engineering, University of Manchester)

14:45 Calibration curve generation for the use of Xenon as a pressure indicator in porous media using micro computed tomography - Mark Willemsz (Mechanical Engineering, Technical University Eindhoven, the Netherlands)

15:00 Influence of Capillarity on Salt Precipitation during Primary CO2-Brine Displacement - Boris Jammernegg
3.3
3.3
14:15 - 15:30
Contributions

14:15 Magnetic resonance imaging of the swelling of polymeric hydrogels - Didier STEMMELEN (LEMTA UMR7563 CNRS Université de Lorraine)

14:30 Influence of interaction between confined hydrogel beads on their growth swelling dynamics - Sebastián Ariel Falcioni (Universidad de Buenos Aires, Facultad de Ingeniería, Grupo de Medios Porosos, Paseo Colón 850, 1063 Buenos Aires, Argentina)

14:45 Linear stability analysis for the formation of wrinkles on confined swelling hydrogels - Joseph Webber (University of Cambridge)

15:00 Drying-induced bending of hydrogel disks - Jean-Francois Louf (Auburn University)

15:15 Pattern Formation in Crumpled Hydrogel upon Rapid Dehydration with Acetone - George Fortune (DAMTP, University of Cambridge)
3.3
3.3
14:15 - 15:30
Contributions

14:15 Analytical and numerical investigations of imbibition in porous media - Akshit Agarwal (Indian Institute of Technology Delhi)

14:30 Dissolution of trapped CO2 in carbonates rock at high pressure and high temperature conditions using X-ray micro-tomography - Abdul Hakim Mazeli

14:45 Trapping Behavior of Gases from 4D Pore Scale Imaging - Tibi Sorop (Shell Global Solutions International B.V.)

15:00 Multiphase flow dynamics effect on microscale phase configuration - Ilan Ben-Noah (Institute of Environmental Assessment and Water Research (IDAEA), The Spanish National Research Council (CSIC), Barcelona, Spain.)

15:15 Nonequilibrium and cooperative behavior in quasistatic fluid-fluid displacements underpin energy dissipation and hysteresis in the passage through constrictions - Ran Holtzman (Coventry University)
3.3
3.3
14:15 - 15:30
Contributions

14:15 Recent Contributions to the Study of Immiscible Viscous Fingering - Kenneth Sorbie (Heriot-Watt University)

14:30 Global implicit solver for multiphase multicomponent flow in porous media with multiple gas components and general reactions - Markus Knodel (Simulation in Technology TechSim)

14:45 A study of a non-equilibrium model with relative permeability hysteresis in two-phase water-oil system - Eduardo Abreu (University of Campinas, Sao Paulo, Brazil)

15:00 Compositional Multiphase Flow Simulation: Challenges and Treatment by Deep Learning - Tian Qiao

15:15 Four-phase equilibrium calculation algorithm for water/hydrocarbon mixtures - Martin Jex (ctu fnspe)
3.3
3.3
14:15 - 15:30
Contributions

14:15 A digital core reconstruction method based on discrete element method considering the actual shape of rock particles - Chunqi Wang (Research Center of Multiphase Flow in Porous Media, China University of Petroleum (East China))

14:30 Flow field analysis towards improved predictability of diffusive flux in host rocks for radioactive waste - Cornelius Fischer (Reactive Transport Department, Institute of Resource Ecology, Helmholtz-Zentrum Dresden Rossendorf (HZDR))

14:45 Evidence of self-sealing in wellbore cement under geologic CO2 storage conditions by micro-CT, SEM and Raman observations - Yan WANG

15:00 Attention-Res-UNet-based WGAN-GP Network to Boost Digital Rock Image Resolution - Zhen Zhang

15:15 3D observation of (nano)-cellulose fibers network by multiscale imaging techniques: from nanometer to millimeter scale. - NELLY PADILLA BELLO
3.3
3.3
14:15 - 15:30
Contributions

14:15 Gelation in model porous media investigated with environmentally-sensitive molecular rotors - Romane Le Dizès Castell

14:30 The permeability of pillar arrays in microfluidic devices: an application of Brinkman’s theory towards wall friction - Wouter den Otter (University of Twente)

14:45 Displacement enhancement by nanogel-in-oil suspension with macroemulsion evolution in porous media - Xukang Lu (Tsinghua University)

15:00 Clogging and particle accumulation during the flow of suspensions of solid particles in model 2D porous media. - Hugues Bodiguel (Université Grenoble Alpes, CNRS, G-INP, LRP)

15:15 Hydrate film formation in subsea carbon storage - Wen Song (University of Texas at Austin)
3.3
3.3
14:15 - 15:30
Contributions

14:15 In Vitro Characterization of Lingering Red Blood Cells In Capillary Networks - Aurelia Bucciarelli (ARTORG Center for Biomedical Engineering Research, University of Bern, 3010, Bern, Switzerland)

14:30 Anomalous transport in brain microvascular networks - Tanguy Le Borgne (University of Rennes)

14:45 Numerical methods for simulating flows in biological networks - Tobias Koeppl (Hasselt University)

15:00 Modeling contraction in linearly elastic tissue using point sources - Wietse Boon (Politecnico di Milano)

15:15 Theoretical and experimental study of intracellular transport using a porous media approach - Olivier Destrian (CentraleSupélec)
15:40 Deep Learning for Parameterization and Calibration of Subsurface Flow Models - Behnam Jafarpour (University of Southern California)
Deep Learning for Parameterization and Calibration of Subsurface Flow Models ((MS24) Invited and Plenary Sessions)
- Behnam Jafarpour (University of Southern California)
15:40 - 16:10
Calibration of subsurface flow models often leads to underdetermined inverse problems, where limited data is used to estimate spatially distributed hydraulic properties of geologic formations at high resolution. The problem is usually solved by using a given model of geologic continuity to constrain the expected distribution and connectivity patterns of the solution. For non-Gaussian problems, imposing the specified model of continuity is not trivial. Low-dimensional parameterization methods are commonly adopted to improve problem ill-posedness and to capture and preserve the expected spatial connectivity patterns in the solution. Deep learning offers a new perspective for low-dimensional parameterization and calibration of complex high-dimensional flow models. Using training data with diverse and complex spatial connectivity patterns, deep learning models can learn a nonlinear mapping from high-dimensional spatial distribution of properties onto a low-dimensional latent space that provides a compact description of model calibration parameters. The resulting latent space can be used to parameterize the inverse problem and to facilitate the search for solutions that are geologically plausible and that reproduce the observed flow response data. More complex architectures can be developed by jointly constructing low-dimensional parameter and data latent spaces, and a direct inverse mapping from the data latent space to the parameter latent space, to perform regression. Alternative parameterization, inversion and data assimilation formulations that exploit latent space representations of model parameters and data are presented and discussed with examples to illustrate the performance of these methods.
Porous biohybrid multifunctional membranes for biosensors and bioremediation - Lidietta Giorno (Institute on Membrane Technology (CNR-ITM))
Porous biohybrid multifunctional membranes for biosensors and bioremediation ((MS24) Invited and Plenary Sessions)
- Lidietta Giorno (Institute on Membrane Technology (CNR-ITM))
15:40 - 16:10
Synthetic membranes are among the most effective technology in separation, fractionation, concentration, and purification. Their nanostructured pores have demonstrated their unique role also in implementing processes such as catalysis, and molecular recognition. Engineering the chemistry of the material, the structure of the pores, and the process conditions permits an extension of the areas of application of membranes. The combination of porous and mesoporous membranes with biomolecules leads to the development of artificial membranes with biofunctional properties. Biorecognition and bioconversion confined in micro and nanoscale compartments are emerging as important properties in the development of membrane-based biosensing and biocatalytic tools. For example, the trace presence of recalcitrant micropollutants (such as pesticides, antibiotics, hormones, etc.) in the environment causes chronic exposure that represents a threat to health and socio-economic wellness. The availability of technologies able to detect and eliminate trace micropollutants appears to be crucial. The lecture will discuss the development of biofunctionalized porous membranes and their ability in intercepting traces of a model pesticide (such as paraoxon). The capability of membranes functionalized with an enzyme (phosphotriesterase) to fully degrade the pesticide will be also illustrated. Superparamagnetic plasmonic nanoparticles (core-shell iron-gold nanoparticles) conjugated with enzymes are orderly arranged in porous polymeric frameworks able to accumulate the trace contaminant and enhance the interaction with the biochemical receptor. The role of membrane material, pore size, structure, morphology, topography, thickness, and surface energy on the mass transport, molecular interaction, and stabilization of the biomolecules will be outlined.
16:10 Poster Session IV
Poster Session IV
16:10 - 17:40
Contributions

16:10 Exploiting induced carbonate precipitation to improve reservoir storage integrity and geothermal system efficiency - Philip Salter (University of Strathclyde)

16:10 Experimental study of microbial effects on anhydrite and cement during hydrogen storage in salt caverns. - Joyce Schmatz (MaP - Microstructure and Pores GmbH)

16:10 Dynamic pore network modeling of imbibition in porous media with corner film flow - Jan Carmeliet (ETHZ)

16:10 Structural controls on the development of karst environments: A multi-scale experimental investigation - Théo BRIOLET (IFP Energies Nouvelles, Laboratoire de Géologie, UMR 8538, CNRS, Ecole normale supérieure, PSL Research University)

16:10 Design of Functionalized Molecules and Polymers (FMP) for Improving the Containment of Subsurface CO2 - Sina Omrani (University of Manchester)

16:10 Comparing 2D micromodel patterns for pore-scale Underground Storage studies - Alice Massimiani (Politecnico di Torino)

16:10 Wettability alteration of microfluidic devices using plasma and its influence on trapping mechanisms in geological reservoirs - Viktor Gredičak

16:10 RepoTREND – A Program Package for Safety Analysis of a Final Repository for Radioactive Waste - Tatiana Reiche

16:10 Enhancing Oil Recovery from Carbonate Reservoirs with Nanoparticle-Assisted Foams - Ayomikun Bello (Skolkovo Institute of Science and Technoloy)

16:10 Improving Colloidal Silica Grout’s Performance as an Injectable Sub-surface Barrier and Soil Stabiliser for Nuclear Decommissioning - David Morrison (University of Strathclyde, Dept. of Civil & Environmental Engineering)

16:10 Assessment of hydrogen uptake ability of clay-rich caprocks - Mohammad Masoudi (Department of Geosciences, University of Oslo, Norway)

16:10 Semi-Analytical Model to Predict Dynamic Capillary Pressure - Water Saturation Relationships for Multiphase Flows in Porous-Media - Harris Rabbani (Texas A&M University at Qatar)

16:10 Molecular Mechanisms Underlying The Treatment of Archaeological Wood Cell Wall Composite with Polyethylene Glycol: A Hybrid Monte Carlo and Molecular Dynamics Study - Ali Shomali (ETH Zurich)

16:10 The impact of heterogeneity in the pore structure of a laboratory sedimented clay sample when measuring swelling anisotropy - Irene Rocchi (Department of Environmental and Resource Engineering, Technical University of Denmark)

16:10 Is mixing chaotic in laminar flows through rocks? - Alexandre Puyguiraud (Université de Rennes 1)

16:10 Swelling of oak wood in water-ethanol mixtures : impact of the liquid composition on the material deformation. - Cédric Dussaut (Laboratoire Génie des Procédés et Matériaux)

16:10 Forward and Inverse Modeling of Nonisothermal Multiphase Poromechanics using Physics-informed Neural Networks (PINNs) - Ruben Juanes (MIT)

16:10 Water transport in n-alkane phases through diffusion and emulsion: insights into oil remobilization from a pore-scale perspective - LIFEI YAN

16:10 Novel multi-scale pore network modeling approach that combines high-resolution pore volume reconstruction and super-resolution segmentation - Xin Liu (Ali I. Al-Naimi Petroleum Engineering Research Center (ANPERC), King Abdullah University of Science and Technology (KAUST))

16:10 Potential Applications of Quantum Computing in Pore Scale Modeling - Daniel Rathmaier (Colorado School of Mines)

16:10 Equivalent permeability estimation of vugular porous media micromodels - Monique Dali

16:10 Geometric Characterizations for the Prediction of Electrical Properties in Porous Media - Bernard Chang (The University of Texas at Austin)

16:10 Discontinuous Phase Flow in Porous Media: A Pore-scale Approach - Lei Zhang (China University of Petroleum)

16:10 Effect of Water on the Methane Adsorption on the Na-Montmorillonite Surface: Molecular Dynamics Study - Vasily Pisarev (HSE University)

16:10 Underground hydrogen storage in deep aquifers with CO2 as a cushion gas - Sabrine BEN RHOUMA (BRGM)

16:10 High-resolution Darcy-Brinkman simulation of wormhole growth based on X-CT data. - Michał Dzikowski (Institute of Theoretical Physics, Faculty of Physics, University of Warsaw, Warsaw, Poland)

16:10 Numerical investigation of chaotic advection in porous media at the Pore and Darcy scales - Stefano Ascione

16:10 Model for the simulation of reaction-mixing processes at boundary layers - Alisdair Soppitt (University of Warwick)

16:10 Alquimia: A generic interface to biogeochemical codes - Sergi Molins (Lawrence Berkeley National Laboratory)

16:10 Evaluation of nanoparticle-based fluids with regard to the enhanced oil recovery (EOR) efficiency and energy cost of their synthesis - Anastasia Strekla (Foundation for Research and Technology Hellas - Institute of Chemical Engineering Sciences)

16:10 Permeability Contribution Estimation of Different Pore Structures in the Heterogeneous Porous Media Using Image-Based Rock Typing - Yuzhu Wang (Department of Petroleum Engineering, CPG, King Fahd University of Petroleum and Minerals, Dhahran, 31261, Saudi Arabia)

16:10 Rock thermal properties prediction based on acoustic wave velocity in geothermal reservoirs - Parvin Kolah Kaj

16:10 Pore-scale investigation of gas mixing, brine salinity, and salt type influence on the dynamic contact angle using Microfluidics for underground CO2 sequestration - Amer Alanazi

16:10 Water permeability reduction associated with injection of oil-water emulsions and microcapsule suspensions in Bentheimer sandstone - Paulo Hoyer (PUC-Rio)

16:10 Carbon sequestration in porous materials: Uniform CO2 flooding and reaction front - Roi Roded (Civil and Environmental Engineering, Duke University, Durham, NC, USA)

16:10 Impact of structural heterogeneity on fluid phase patterns in two-phase flow through two-dimensional porous micromodels - Oshri Borgman (Géosciences Rennes, Université de Rennes 1, Rennes, France)

16:10 Experimental Investigation of Wettability Alteration by Modified Salinity Water in Chalk Reservoirs - Rasoul Mokhtari (DTU Offshore)

16:10 Multi-Scale Assessment of Surfactant-Assisted Spontaneous Imbibition - Jamal Alaamri (KAUST)

16:10 Micro-Scale Simulation and Characterization of Adsorption-Diffusion Behaviors of Nanoparticles onto Mobile Oil/Water Interface - Can Ke

16:10 Discrete fluid model for drying of capillary porous media with evolving microstructure - jing chen

16:10 Symmetrizing multiphase flow equations for improved accuracy - Reza Haghani-Hassan-Abadi (NTNU: Norwegian University of Science and Technology)

16:10 Multiscale network modeling of flow in carbonate rocks with microporosity - Asli S. Gundogar (Imperial College London)

16:10 Asymptotic Homogenization - Modeling the charging behavior of Li-ion batteries - Giuliano Lombardo (University of Stuttgart, Institute of Chemical Process Engineering)
Thursday 25 May 2023
08:30 Finite element modelling of the growth and flow properties of multiple-scale three-dimensional fracture networks - Adriana Paluszny (Imperial College London)
Finite element modelling of the growth and flow properties of multiple-scale three-dimensional fracture networks ((MS24) Invited and Plenary Sessions)
- Adriana Paluszny (Imperial College London)
08:30 - 09:00
The generation and growth of multiple three-dimensional fractures, and fluid flow through the resultant fractured rock mass, is modelled by solving the displacement and flow equations numerically, using the finite element method. The approach uses the Imperial College Geomechanics Toolkit, an in-house C++ 3D simulator that captures coupled thermo-poro-elastic deformation and damage accumulation, while accounting for variable fracture apertures and local transmissivities on the fracture surface, which evolve as a function of deformation. Simulations are able to capture fracture growth at different scales, and model fracture nucleation based on the evaluation of a local damage model. Quasi-static fracture growth is simulated for a number of different stress regimes, making use of a new geometric representation of fractures, based on a novel periodic quadratic polynomial spatial B-spline approach. Surfaces are formed by lofting tip curves during fracture growth, resulting in a low-cost, high-resolution approach. Meshing of the domain uses quadratic quadrilaterals and hexahedra, as opposed to triangles and tetrahedra. The generated fractures are generally non-planar, due to the varying crack-tip stress intensity factors created by stress field interactions between neighboring fractures. Realistic three-dimensional fracture patterns emerge from the simulations, due to nucleation, growth, interaction and intersection of fractures at several scales. Datasets with thousands of geomechanically interacting discrete fractures at different scales will be presented. Fluid flow through the generated fractured rock mass exhibits interesting channeling effects, which are strongly influenced by the stress regime.
Thermodynamic efficiency/limit of subsurface energy production/storage systems - Rouhi Farajzadeh (TU Delft)
Thermodynamic efficiency/limit of subsurface energy production/storage systems ((MS24) Invited and Plenary Sessions)
- Rouhi Farajzadeh (TU Delft)
08:30 - 09:00
To mitigate the negative impacts of increasing CO2 concentrations in the atmosphere on climate change complementary decision tools should be considered when selecting or evaluating the performance of certain (sub-surface) energy production and/or storage systems. Here we explain the framework in which the subsurface energy system could be analyzed using the exergy concept based on the Second Law of Thermodynamics. The analysis considers the energy requirement of different stages in the life cycle of the considered system, which can later be used to quantify its CO2 emission. The exergy analysis provides valuable information on comparing different energy routes in terms of their end-to-end efficiency and/or their CO2 intensity (gr-CO2/MJ). We show application of the methodology for different hydrocarbon production systems, underground hydrogen storage, and CO2 capture and storage. We assert that during energy transition time the focus should be on minimizing CO2 intensity of the selected systems, regardless of its origin.
09:15 4.1
4.1
09:15 - 10:45
Contributions

09:15 Multi-scale and dynamic imaging of shales and mudstone: increasing understanding of sealing ability for sub-surface storage - Lin Ma (University of Manchester)

09:30 Microfluidic Study of CO2 Dissolution Dynamics under Geological Sequestration Conditions - Wei Yu (King Fahd University of Petroleum & Minerals)

09:45 In Situ Imaging of Dynamic Processes in Chalk - Peter Winkel Rasmussen (Department of Applied Mathematics and Computer Science, Technical University of Denmark)

10:00 Mineral Carbonation Sensitivity to Hydrogeologic Heterogeneity of Basaltic Aquifers - Adedapo Awolayo (Department of Civil Engineering, McMaster University)

10:15 Time-lapse imaging of fine particle movement in porous materials - CHENZI SHI

10:30 Properties of restructuring porous media for thermochemical energy storage - Marie Gollsch (Institute of Engineering Thermodynamics, German Aerospace Center (DLR))
4.1
4.1
09:15 - 10:45
Contributions

09:15 Competitive adsorption of CO$_2$ and CH$_4$ in functionalized amorphous-silica nanopores - Mattia Turchi (Empa)

09:30 Bridging the continuum and discrete models developed to simulate solute transport and distribution in drying porous media - Jing Chen

09:45 Dewatering and consolidation of clay slurries - Ismail Myouri

10:00 Effects of molecular details on two-phase flows through nanopores - Petter Johansson (LFCR, Université de Pau et des Pays de l'Adour)

10:15 Melting Kinetics of Permafrost under Overlaying Saline Water - Yumin Wang

10:30 Droplets at Liquid-Fluid Interfaces: Pressure Field and Coalescence - JOSE LUIZ DAVALOS MONTEIRO (KAUST)
4.1
4.1
09:15 - 10:45
Contributions

09:15 A linear iterative scheme for reactive flow in a porous medium - Iuliu Sorin Pop (Hasselt University)

09:30 Hyperbolic Systems for Strongly Coupled Multi-Phase Flow and Transport in the Sub-Surface - Patrick Jenny

09:45 A Lagrange multiplier method for the fully dynamic Navier-Stokes - Biot system - Ivan Yotov (University of Pittsburgh)

10:00 Sub-grid Modeling in a Particle-based Approach: Regularization of Non-linear Hyperbolic Conservation Law - Ranit Monga (Institute of Fluid Dynamics, ETH Zürich)

10:15 Multiscale Extended Finite Element Method for the Simulation of Contact – Frictional Behaviors of Fractures Under Compression - Fanxiang Xu (Delft University of Technology)

10:30 3D modeling of macro-segregation and formation of freckles in solidification based on the fully decoupled enthalpy-porosity method - Xiaoyu Feng (Computational Transport Phenomena Laboratory (CTPL), Division of Physical Sciences and Engineering (PSE), King Abdullah University of Science and Technology (KAUST))
4.1
4.1
09:15 - 10:45
Contributions

09:15 Meshless Lattice Boltzmann Method for pore-scale porous media flow and parameters calculation - Dawid Strzelczyk (Institute of Theoretical Physics, Faculty of Physics and Astronomy, University of Wrocław, Wrocław, Poland)

09:30 Volume of Fluid based study of the three phase dynamic contact line in the wetting of a thin channel. - Yash Kulkarni (Institut Jean Le Rond d'Alembert, Sorbonne University)

09:45 Discrete Element Method modelling of non-active clays - Arianna Gea Pagano (University of Glasgow)

10:00 CFD simulation of particle capture in open-cell foams: filtration efficiency and comparison with granular beds - Gianluca Boccardo (Politecnico di Torino, Italy)

10:15 Pore-network modeling of gas hydrate dissociation: impact on pressure response and gas transport - Karsten Thompson

10:30 Pore-scale modelling and analysis of multiphase flow in gas diffusion layers - Min Li (Imperial College London)
4.1
4.1
09:15 - 10:45
Contributions

09:15 Using 4D-Imaging to describe the impact of the microstructure on sublimation front patterns - Sebastian Gruber (Technical University of Munich)

09:30 Dynamics of water films during wetting and drying cycles in porous media - Gijs Wensink (Department of Mechanical Engineering, Eindhoven University of Technology)

09:45 Spatio-temporally Resolved Dynamical Transitions in Flow of Pickering Emulsions through Porous Media - Milana Trifkovic

10:00 Water dynamics during gas fed CO2-electrolysis revealed by 4D X-ray imaging - Robert Fischer (Paul Scherrer Institut, PSI)

10:15 Use of 4D tomography to track the evolving geometry and flow patterns in dissolving rocks - Piotr Szymczak (Faculty of Physics, University of Warsaw, Warsaw, Poland)

10:30 Analysing salt precipitation-damage coupling in limestone with 4D X-ray tomographic imaging - Hannelore Derluyn (CNRS - Univ Pau & Pays Adour)
4.1
4.1
09:15 - 10:45
Contributions

09:15 Simulation of the inelastic deformations of porous reservoirs under cyclic loading relevant for underground hydrogen storage - Kishan Ramesh Kumar (TU Delft)

09:30 A Bounding Surface Viscoplasticity Model for Creep and Strain-Rate-Dependent Behaviour of Soils - Nasser Khalili (Scientia Professor )

09:45 Coupling mechanism of sorption and deformation in amorphous cellulose with hierarchical porous structure - Lingji Hua (Chair of Building Physics, Department of Mechanical and Process Engineering, ETH Zürich (Swiss Federal Institute of Technology in Zürich))

10:00 Polytopal Discontinuos Galerkin discretization of the fully-coupled thermo-poroelastic problem - Michele Botti (Politecnico di Milano)

10:15 Seismic wave attenuation and dispersion due to two-phase fluid saturation: Laboratory measurements and numerical simulations based on X-Ray CT - Samuel Chapman (Ecole Normale Supérieure / CNRS UMR 8538)

10:30 Simulation of cyclic storage of hydrogen in salt caverns based on laboratory-benchmarked modeling of creep - Herminio Tasinafo Honorio (TU Delft)
4.1
4.1
09:15 - 10:45
Contributions

09:15 Structure and adsorption mechanisms of hydrogen gas on water-saturated montmorillonite clay: A molecular dynamics study - Sylvia M. Mutisya (SUBATECH (IMT-Atlantique, Université de Nantes, CNRS-IN2P3) Nantes, France)

09:30 Confined fluids studied by total neutron scattering - Marta Falkowska (The University of Manchester)

09:45 Dynamics and Phase behaviour of Ionic Liquid Crystal confined in Nanoporous Alumina - Mohamed Aejaz Kolmangadi (BAM)

10:00 Water diffusion in cellulose nanopores - Philippe Coussot (Univ. Paris-Est)

10:15 Surface interactions and reactions strongly impact ion adsorption and electrokinetic transport - Remco Hartkamp (Process & Energy, Delft University of Technology)

10:30 Temperature-Dependent Behavior of Bicontinuous Microemulsions in Pores - René Haverkamp
4.1
4.1
09:15 - 10:45
Contributions

09:15 Ultrasonic Study of Water Adsorbed in Nanoporous Glasses - Gennady Gor (New Jersey Institute of Technology)

09:30 A (dual) network model for heat transfer in coupled porous media free flow systems - Rainer Helmig (University of Stuttgart)

09:45 Colloidal particles adsorption fluctuations: experimental and kirkwood buff integrals approaches - Jean-Marc Simon (Université de Bourgogn)

10:00 Local Equilibrium in Liquid Phase Shock Waves - Tage W. Maltby (NTNU)
10:45 Poster Session V
Poster Session V
10:45 - 12:15
Contributions

10:45 Post-breakthrough finger evolution in unstable growth processes - Stanisław Żukowski (University of Warsaw / Université Paris Cité)

10:45 Pore-scale hysteresis and Relative Permeabilities in Edwards Brown Dolomite - Nihal Darraj (Imperial College London )

10:45 Transport and evaporation of aqueous co-solvent solutions in thin porous media - Shuo Wang (Eindhoven University of Technology)

10:45 Geometric confinement stabilizes fluid invasion during imbibition in microfluidic porous media - Wenhai Lei (Tsinghua University)

10:45 Viscous coupling effect on hydraulic conductance in dynamic pore network model - Wenbo Gong

10:45 On the use of tortuosity for modelling Li-ion battery separators - Isaac Paten (Institut de Mécanique des Fluides de Toulouse)

10:45 A process-based approach to study the effect of microporosity on flow properties in carbonate rock - Anup Shahi (IITB-Monash Research Academy)

10:45 Electrode Design Booster Using a Statistical Digital Twin - Roman Buchheit (Math2Market GmbH)

10:45 Water-H2-Quartz and Water-H2-Calcite Wettability Measurements: An Experimental and Theoretical Investigation - Ahmed Al-Yaseri (King Fahd University of Petroleum and Minerals)

10:45 Towards the prediction of caprock porosity and permeability for CO2 storage seal integrity assessment - Wan Muhammad Luqman Sazali

10:45 Low cost 3D printing of electrically conductive porous media for gas diffusion layers - Yann Dumay (DHBW Mannheim)

10:45 Modelling Long-Term Thermal Energy Storage in Water-Gravel-Filled Artificial Basin Systems - Christoph Bott (Martin Luther University Halle-Wittenberg, Institute of Geosciences and Geography, Applied Geology)

10:45 Atomistic Insights into the Droplet Size Evolution during Self-Microemulsification - Yuequn Fu (University of Oslo)

10:45 Transient deformation and swelling of paper by aqueous co-solvent solutions - Sajjad Karimnejad (Eindhoven University of Technology)

10:45 Evaluation of foam stability in bulk and core-scale with CO2-rich gas mixture and zwitterionic surfactants - Leandro Freitas Lopes (Pontifical Catholic University of Rio de Janeiro)

10:45 A Quick Approach to Model Fault Leakage during CO2 Storage - Hariharan Ramachandran (Heriot-Watt University)

10:45 An energy stable SPH method for fluid-solid coupling in geological porous medium - XINGYU ZHU

10:45 Numerical investigation of impacts of surface wettability on gas hydrate formation in porous media - Qian Zhang (Institute of Geology and Geophysics, Chinese Academy of Sciences)

10:45 Error estimates for the scalar auxiliary variable (SAV) scheme to the Cahn-Hilliard equation - Weifeng Qiu (City University of Hong Kong)

10:45 Modeling and simulation of reactive two mineral systems - Nadja Ray

10:45 Dissolution-precipitation processes: patterns and product separation - Tomasz Szawełło (University of Warsaw)

10:45 Inertial effects in porous media flow with OpenFOAM - Damian Śnieżek (Uniwersytet Wrocławski)

10:45 Spatial microporosity mapping in meso-scale rock samples by X-Ray Computed Tomography - Juan C. Roa P.

10:45 Assessing formation damage in-situ using X-ray computed tomography - Rory Brittain (University of Strathclyde)

10:45 Employing GPUs to compute effective properties of porous media from μCT scans in desktop computers - Pedro Cortez Lopes (Universidade Federal Fluminense)

10:45 Pore size distribution and permeability improvement estimation of porous rocks: a comparison of image-based methods and experimental NMR measurements - Ricardo Leiderman (Universidade Federal Fluminense)

10:45 Nano-scale imaging and modelling of gas transport in clay-rich mudstones - Xin Zhong

10:45 Distributed sensing for monitoring greenhouse gas loading to the atmosphere through disturbed soil: Intermediate-scale testing - Tissa Illangasekare (Colorado School of Mines)

10:45 Experimental study on effect of cyclic loading on deformation and AE characteristics of sandstone: Relevant for energy storage - Milad Naderloo (Technical University of Delft)

10:45 Incorporating Bubble Evolution and Transport in Constitutive Relationships for Quasi- and non-Equilibrium two-Phase Flo - Dorthe Wildenschild (Oregon State University)

10:45 Visualization of pore formation during polymerization-induced phase separation - Sebastian Brosch (Chemical Process Engineering AVT.CVT, RWTH Aachen University)

10:45 Controlling hygrothermics of biobased construction material - Luoyi Yan

10:45 Numerical analysis of axial compression impact on the hydrodynamics of open-cell foams - Alaa-eddine Ennazii

10:45 A mixed-wet pore network model for electrolyte imbibition in gas diffusion electrodes - Thorben Mager (Institute for Chemical Process Engineering, University of Stuttgart)

10:45 Predicting Representative Elementary Volume by determining the evolution law of the cone of convergence - Sijmen Zwarts (TUDelft-CITG-3Md)

10:45 Investigating calcite dissolution and relative effects on Underground Hydrogen Storage (UHS) through pore-scale reactive transport model and reservoir simulation - ZhenKai Bo (University of Queensland)

10:45 Pore-scale imaging and analysis of surfactant flooding - Hussain Alzahrani (Hussain)

10:45 Colloidosome-Transported Chemical Carbonate Precipitation (CTCCP): A Novel, Low-Emission Grouting Strategy for Cracks and Porous Media - Jack Roden (University of Strathclyde)

10:45 Simulation of transition flows and phase changes in porous media using modified equations of state to obtain the correct surface tension - Javier Fernández-Fidalgo (Universidade da Coruña and Universidad Politécnica de Madrid)

10:45 Multiscale Integration of Discrete Fracture Network and Pore Network Modes Focused on the Pore-Fracture Interface - Ciprian Panaitescu

10:45 Micromodel porous network with heterogeneous wettability - Nicolas PANNACCI (IFP Energies nouvelles, 1 et 4 avenue de Bois-Préau, 92852 Rueil-Malmaison, France)

10:45 Near well bore formation damage by produced water reinjection - Maksim Kurbasov
14:00 4.2
4.2
14:00 - 15:30
Contributions

14:00 Water vapor transport in porous salt hydrate particles in view of energy storage - Joey Aarts (Eindhoven University of Technology)

14:15 he moisture and temperature evolution in a zeolite heat storage reactor during cycling: an NMR study - Leo Pel (Eindhoven University of Technology)

14:30 Engineering ordered porous structure with direct additive-manufacturing approach for solar thermochemical fuel production - Da Xu (Solar Energy Conversion and Utilization Laboratory, Department of Mechanical and Energy Engineering, Southern University of Science and Technology)

14:45 An image-based sphere insertion method for porous media drainage simulations with gravity - Eric A. Chadwick (University of Toronto)

15:00 Identification and understanding of colloidal destabilization mechanisms in geothermal processes - Marc Fleury (IFP Energies nouvelles)

15:15 Fracture permeability evolution as a result of geochemical granite alteration in geothermal systems - Nick Harpers (Heriot-Watt University)
4.2
4.2
14:00 - 15:30
Contributions

14:00 Exploring the Influence of Interfacial Processes on the Transport and Retention of PFAS in AFFF-Contaminated Soils - Linda Abriola (Brown University)

14:15 Mixing as restart - The role of interface shear in fluid-solid reaction efficiency under chaotic advection - Tomas Aquino (IDAEA -- CSIC)

14:30 Recent Advances in Modelling Reactive Interfaces in Pore-Scale Simulations - Cyprien Soulaine (CNRS Orleans, Univ Orleans)

14:45 Direct nanoscale investigation of calcite dissolution kinetics - Chiara Recalcati

15:00 Adsorption, ion exchange, and surface complexation models for rock-fluid-fluid interactions: an overview and a new implementation in REAKTORO - Ali Akbar Eftekhari (Technical University of Denmark)

15:15 Modeling interfaces explicitly with an embedded-boundary finite-volume method across applications - Sergi Molins (Lawrence Berkeley National Laboratory)
4.2
4.2
14:00 - 15:30
Contributions

14:00 The Darcy-type boundary condition on a porous wall - Igor Pažanin (Department of Mathematics, Faculty of Science, University of Zagreb, Croatia)

14:15 Numerical Simulation of Effective Models for Transport Processes in Deformable Porous Media within Mixed Eulerian/Lagrangian Framework - Jonas Knoch (FAU Erlangen-Nürnberg)

14:30 Coupled LBM-DEM model and its application to droplet impact on deformable porous media - Linlin Fei (ETH Zurich)

14:45 Upscaling investigations of dissolution using machine learning and GeoChemFoam - Hannah Menke (Heriot-Watt University)

15:00 Multiscale modelling of plant nitrogen use efficiency - Tiina Roose (University of Southampton)

15:15 Investigations of Degenerate Equations for Fluid Flow and Reactive Transport in Clogging Porous Media - Raphael Schulz (KU University Eichstätt-Ingolstadt)
4.2
4.2
14:00 - 15:30
Contributions

14:00 Modelling the transport and retention of nanoparticles in a single partially-saturated pore in soil - Jayaraj J (PhD Scholar)

14:15 Direct numerical modelling of multiphase flow through reinforced porous media - Luka Malenica (ETH Zurich)

14:30 Multi-scale pore network model for simulation of multi-phase flow in heterogeneous porous media - Sajjad Foroughi (imperial college london)

14:45 Multiscale forward modeling of the interplay between carbonate precipitation and porous media transport properties during geological carbon sequestration - Tianxiao Shen (Columbia University )

15:00 Pore-scale modeling of pore-clogging by aggregation of particles - Laurez Maya (BRGM - ISTO)

15:15 Pore network modeling of calcination in single particles with evolving microstructure - Xiang Lu
4.2
4.2
14:00 - 15:30
Contributions

14:00 Characterization of oilwell cement with Ca-montmorillonite additives modified by supercritical CO2 - Liwei Zhang (Institute of Rock and Soil Mechanics, Chinese Academy of Sciences)

14:15 Integration of SEM Images and NMR Measurements to Characterize Pore Size Distributions in Unconventional Tight Rock Reservoirs - Paul Hart (Chevron)

14:30 Nano-resolution X-CT 3D Imaging and Permeability Simulation of an Actual Shale Kaolinite - Anderson Camargo Moreira (Federal University of Santa Catarina, Mechanical Eng. Dept. LMPT )

14:45 Multiscale analysis of microporosity of deep marine reservoir rocks using hard X-rays zoom microtomography of synchrotron source - Daphne Silva Pino (Brazilian Synchrotron Light Laboratory)

15:00 Scale-independent rock heterogeneity classifier applied to microtomography images - Masa Prodanovic (The University of Texas at Austin)

15:15 In-situ visualisation of microbial hydrogen consumption using high-resolution PET-MRI - Raymond Mushabe (University of Bergen)
4.2
4.2
14:00 - 15:30
Contributions

14:00 Flow enhancement in nano-channels using surface acoustic waves - Saikat Datta (School of Engineering, University of Edinburgh)

14:15 Bridging adsorption behavior of CH4-CO2 binary systems across scales - Saman Aryana (University of Wyoming)

14:30 Gas and Water Flow Regulations in Remolded Hydrate-hosting Porous Media Based on Non-Darcy Correction of the Pore Network Modeling - Shanshan Zhou (Dalian University of Technology & University of Manchester)

14:45 The phase equilibria of aqueous electrolytes in confinement under Martian condition - Shaoheng Wang

15:00 Multiphysical pore-scale modelling of ion transport in variably saturated nanoporous media - Yuankai Yang (Forschungszentrum Jülich)

15:15 A molecular dynamics study on dissolution and adsorption dynamics of CO2 with H2 impurity in oil reservoir - Cheng Chen (Brunel University London)
4.2
4.2
14:00 - 15:30
Contributions

14:00 Vapor and bound water transport in textiles and paper: observation by MRI and modelling - Yuliang Zou (Laboratoire Navier (Ecole des Ponts Paris Tech-Univ Gustave Eiffel-CNRS))

14:15 Imaging particle transport in thin, porous media using high-speed NMR. - ruben nicasy (Eindhoven University of Technology)

14:30 A Knowledge-Driven Reduced-Order Model with a data-driven corrector for thin porous media - Alaa Armiti-Juber (University of Stuttgart)

14:45 Insights into Water Cluster Instabilities in Gas Diffusion Layers of Polymer Electrolyte Fuel Cells - Jens Eller (Paul Scherrer Institut, Switzerland)

15:00 Towards the Print Excellency via Ink – Media Interactions Ideation - Nicolae Tomozeiu (Canon Production Printing B.V.)
4.2
4.2
14:00 - 15:30
Contributions

14:00 Comparison of two optimization approaches in an electrochemical reaction-diffusion system from an entropy generation perspective - Mehrzad Alizadeh (Department of Mechanical Engineering, Graduate School of Engineering, Osaka University, Suita, 565-0871, Osaka, Japan)

14:15 Is salt precipitation an issue during geological storage of hydrogen in saline aquifers? from thermodynamic perspective using PC-SAFT EoS - Mohammad Masoudi (University of Oslo, Department of Geosciences)

14:30 Ion adsorption at nanoscale interfaces out of equilibrium - Fernando Bresme (Imperial College)

14:45 The role of Stern layer ions in ionic transport in porous media - Claire Chassagne (TU Delft)

15:00 Dynamic contact angles and dynamic regimes for advancing liquid fronts - Ignacio Pagonabarraga (University of Barcelona)
15:30 Poster Session VI
Poster Session VI
15:30 - 18:30
Contributions

15:30 Lysimetric experiments to characterize the multiphase mobilization of LNAPL in contaminated soils by a multi-method monitoring approach under controlled climatic scenarios. - Anne-Julie Tinet (GeoRessources - Université de Lorraine)

15:30 Experimental studies of slow drainage in porous media: Effect of the randomness of the porous medium on the fluid flow - Khobaib Khobaib (PoreLab - University of Oslo)

15:30 Mediation of water vapour transport in nanopores via salt solutions: thermodynamic and kinetic study - Olivier Vincent (CNRS)

15:30 Mono-energetic Micro-computed tomography(µCT) A reliable potential alternative to mineral Investigation of formation rock - Arash Nasiri (Montanuniversität Leoben)

15:30 Entropy generation analysis in a quasi-3D PEM fuel cell model with architectured electrocatalyst layer - Mehrzad Alizadeh (Department of Mechanical Engineering, Graduate School of Engineering, Osaka University, Suita, 565-0871, Osaka, Japan)

15:30 Effect of CO2 injection on porosity and texture of reservoir chalk assessed by 1H low-field gradient NMR measurements - Leonardo Teixeira Pinto Meireles (DTU)

15:30 Hydrochemically detrimental factors in ATES applications – An analysis of clogging and scaling processes based on column and batch experiments - Leonie Gabler

15:30 Investigation on the heat change during the disintegration process of pharmaceutical tablets - Jongmin Lee (University of Cambridge)

15:30 CO2 Fluid Properties Parametrization for Accurate Heat, Solubility and Transport Model - Bora Yalcin (KAUST)

15:30 A numerical study on decreasing CO2 emission by flue gas injection into heavy oil reservoirs - Yashar Tavakkoli Osgouei (Middle East Technical University)

15:30 Structural and transport properties of hydrocarbons in clay nanopores - Vasily Pisarev (HSE University)

15:30 Investigating interfacial instability snap-off in a uniform capillary with a sharp wettability contrast - Yemna Qaiser (Texas A&M University at Qatar)

15:30 Expanding Digital Rocks Portal with benchmark datasets and engineered porous media - Masa Prodanovic (The University of Texas at Austin)

15:30 Design of Colloidal Gas Aphron Drilling Fluid Formulations for Enhanced Deep Geothermal Energy Recovery Operations - Edo Boek (Queen Mary University of London)

15:30 Modelling surface-washing of porous media: dye-attenuation of a passive tracer - Francesco Paolo Conto' (DAMTP, University of Cambridge)

15:30 Advanced mesoporous thin film characterisation by ellipsometric porosimetry - Mate Furedi (UCL)

15:30 Morphologically-stable two-phase displacements through localized constrictions are strongly dependent on flow rate - Jordi Ortín (Universitat de Barcelona)

15:30 Deliquescence of salt nanocrystals - Tanya Talreja-Muthreja (Department of Chemistry, University of Hamburg, Germany)

15:30 Nuclear magnetic resonance of drainage and imbibition: Correlating structure and dynamics - Quirine Krol (Montana State University)

15:30 The effects of sand bridge structures on gas and water relative permeability evolution during the continuous sand migration process in hydrate-bearing porous media - Shanshan Zhou

15:30 How does electrical field affects and enhances contaminant migration in porous media ? - Noura Eddaoui (Earth Sciences Institute of Orleans (ISTO), CNRS, Université d’Orléans, Orléans, France)

15:30 Combining Molecular Dynamics and Machine Learning to determine CO2 adsorption features on amorphous nanosurfaces - Ivan Lunati (Empa)

15:30 Effect of fluids on micro-crack evolution in organic-rich shale by molecular dynamics simulations and nanomechanical experiments: A microscopic perspective from the fluid effect on fracturing - Tianhao Wu (Eastern Institute for Advanced Study (EIAS))

15:30 Atomistic computer simulation of the structure and properties of iodine and chlorine containing hydrocalumite (AFm phase) as adsorbent for radionuclides 36Cl, 129I, 137Cs - Artem Glushak (HSE University)

15:30 Innovating porous materials characterization for hydrogen-storage applications - Mohammad Hossein Khoeini (PhD candidate at Technical university of Eindhoven)

15:30 Compositional and Structural characterization of complex fluids via Electrical Impedance Spectroscopy and Electron Microscopy - Nicolae Tomozeiu (Canon Production Printing B.V.)

15:30 Stress concentration in the local load sharing fiber bundle model - Elias Lundheim (NTNU)

15:30 Anisotropic stochastic Pore Network generation algorithm with application to shale gas flow - Andreas Busch (Heriot-Watt University)

15:30 A Size-Structured Approach for Filtration Modelling - Connor McAllister (University of Oxford)

15:30 Pore-scale investigation into dynamics of salt crystal nucleation, precipitation and growth in porous media during CO2 sequestration in saline aquifers - Mohammad Nooraiepour (CO2 Storage Centre, University of Oslo, Norway)

15:30 Exploring the Impact of Ice Formation on Soil Temperature for Ground Source Heat Pumps - Ekaterina Lgotina (Durham University)

15:30 Characterization Of Capillary Driven Flow In Layered Porous Reservoirs - Akshit Agarwal (Indian Institute of Technology Delhi)

15:30 Numerical Modeling of Two-Phase Flow in the Porous Pavement Drainage Structure - Barbara Johansson (University of Stuttgart - Institute for Road and Transport Science)

15:30 Experimental Investigation of CO2, Lean and Flue Gas Injection in a Tight Danish North Sea Oil Reservoir - Ali Talaei (DTU Offshore)

15:30 Comparative study of hydrogen and CO2 performance in subsurface using sharp-interface modelling - Ehsan Vahabzadeh Asbaghi (University of Manchester)

15:30 Reservoir-scale simulation of CO2 solutal convection: approaches and limitations - Igor Bogdanov (laboratoire CHLOE, Université de Pau)

15:30 Nanoscale interface dynamics: Self-assembly and stability of interface film of multi-phase flow in porous media - Yuequn Fu (University of Oslo)

15:30 Flow of Liquid Through a Stagnant Foam in a Model Fracture - Kai Li (Delft U. of Technology)

15:30 Water imbibition in nanoporous Vycor glass: X-ray tomography-based Lattice-Boltzmann simulations and their validation by optical and gravimetric experiments. - Mariia Liseanskaia (Institute for Materials and X-Ray Physics, Hamburg University of Technology, Hamburg, Germany — Deutsches Elektronen-Synchrotron DESY, Hamburg, Germany — Center for Hybrid Nanostructures CHyN, University of Hamburg, Hamburg, Germany)

15:30 Direct Numerical Simulation of weak-inertia single-phase flow in porous materials using SPH - David Krach (University of Stuttgart)

15:30 Multiscale Direct Numerical Simulation of Pore Scale Fluid Flow Through Porous Media - Gospel Ezekiel Stewart
17:00 Multi-Physics Repetitive Loads - J. Carlos Santamarina (Georgia Tech)
Multi-Physics Repetitive Loads ((MS24) Invited and Plenary Sessions)
- J. Carlos Santamarina (Georgia Tech)
17:00 - 17:40
Most natural and engineered systems experience repetitive loading cycles of all kinds, including: stress (our bones and foundations), fluid pressure (the beating of our hearts, tidal action, and pumped hydro storage), suction (our lungs and natural dry-wet cycles), pore fluid chemistry (salt-water intrusion), and thermal cycles (such as silos, freeze-thaw, and geothermal systems). Repetitive loads can cause significant accumulations of volumetric strain (towards the terminal void ratio) and plastic shear strains (shakedown or ratcheting), lead to accelerated transport (of heat, chemical species and particles), and alter material properties and system performance. Complementary multi-scale experiments and simulations provide unique insights into the underlying mechanisms that explain the observed responses. Analysis and design must consider the influence of multi-physics repetitive loads on the long-term performance, serviceability and safety of engineered systems. Asymptotic trends can be used to obtain first-order estimates for simple boundary conditions; however, complex boundary conditions require numerical simulations, the development of new constitutive models and the implementation of hybrid algorithms that avoid standard time-stepping numerical protocols.